Hello im Veronica and this is my first post owing this phone and im loving it! i bought a glass protection that come is curve design but it didnt fit well bubbles of air started to appear and i took it off
Have you tried the liquid protection ? i dont know the name of the product but is a liquid you put in the screen and it makes it hard
Please help me what do you use to protect it?
I use the uv Loca glue and glue on the curved tempered glass protectors on mine
Hi veronica. I own now an s8, but my previous phone was a galaxy s7 (the flat one), in which I had a tempered glass protector. But now, with the curved display of miss s8, the tempered glass I've found are not so great. I really don't recommend the liquid protection , that supposed nano tech solution. I've seen it, and its effects are practically none. U can't tell when u you've applied or not.
As the previous post says, the better solution is to take a tempered glass and UV glue between that and the gorilla glass, and dry it in the UV lamp. That way, u get a better protection, but need to try take out the air bubbles that may get in the process before dry.
I'm sorry if my English can't be excellent, because it's not my original language.
Greetings to u.
I also would be interested in mounting a tempered glass screen protector with a liquid adhesive and then drying it with a UV lamp. The end result looks very good, but I wonder if it does affect the screen of the phone. In case that I would like to remove the foil or replace it ... I do not know if the adhesive is "peaceful", if it leaves residual traces or I risk of having to change the touchscreen at the same time with the glass: D
I'd like to buy this: https://bit.ly/2SSQMZT (Aliexpress).
To be honest, the Spigen NeoFlex is the absolute best option in my opinion. I normally do not like these "Self-Healing" type but, it has been amazing, stays on all corners and I can continue to use my very light but very protective Spigen case as well. I normally do not like cases but the one I use is okay, especially since I have already shattered the front and rear of the phone once. Don't want to do it again.
I second this...
frozeninferno said:
To be honest, the Spigen NeoFlex is the absolute best option in my opinion. I normally do not like these "Self-Healing" type but, it has been amazing, stays on all corners and I can continue to use my very light but very protective Spigen case as well. I normally do not like cases but the one I use is okay, especially since I have already shattered the front and rear of the phone once. Don't want to do it again.
Click to expand...
Click to collapse
I've tried about 6 different tempered glass protectors, and all have either made it very difficult to pull down the top menu, or have gotten dust/lint behind the screen. Went to the Spigen NeoFlex 'film' and never looked back. In fact, I just ordered another set of them because I got polyurethane fingerprints on the screen while doing a wood railing. I had zero problems, it doesn't affect touch sensitivity. I will say that getting the sides to stay took a few minutes of work, but once stuck, it has stayed that way for 8 months so far. I paired it with a Spigen LiquidArmor case. I've dropped the phone onto my ceramic floors several times already and had no damage to the phone. I use wireless charging with no problems.
Related
Saw another post with link to it, but here's a review of the case. It's not super bulky. But add enough protection for most
Leave questions and comments
Just got one of these. My question is to pop the included screen protector off and just go with the one that came with the Nexus or peel that one off and go with the Supcase protector. I've read reviews of people suggesting both.
This is a durable feeling and looking case. I've always had UAG cases in the past but this one seemed to offer a little more protection.
Bgbird68 said:
Just got one of these. My question is to pop the included screen protector off and just go with the one that came with the Nexus or peel that one off and go with the Supcase protector. I've read reviews of people suggesting both.
This is a durable feeling and looking case. I've always had UAG cases in the past but this one seemed to offer a little more protection.
Click to expand...
Click to collapse
I find a tempered glass screen protector under the plastic built-in one to be the best. It sits really flush this way and you can't see the halo in the glass screen protector because of the case.
Bgbird68 said:
Just got one of these. My question is to pop the included screen protector off and just go with the one that came with the Nexus or peel that one off and go with the Supcase protector. I've read reviews of people suggesting both.
This is a durable feeling and looking case. I've always had UAG cases in the past but this one seemed to offer a little more protection.
Click to expand...
Click to collapse
If you do this, make sure you after you pop the built in screen protector off you scrape off the black adhesive that held it on or it will fuse to your screen protector and rip it off if you take off your case. Any small metal tool can be used but be careful not to scratch the case. After its removed you can use some qtips and a little bit of rubbing alcohol to clean any residual adhesive.
I didn't do this originally and my case was stuck to my screen protector for 2 months till I finally decided to try and force it off and it ruined my screen protector.
I'm going to keep my supplied screen protector on along with the case screen protector.
Bgbird68 said:
I'm going to keep my supplied screen protector on along with the case screen protector.
Click to expand...
Click to collapse
Good luck, sensitivity sucks!
No problems with sensitivity so far. I like the case. Little bulky but the phone feels safe.
Bgbird68 said:
No problems with sensitivity so far. I like the case. Little bulky but the phone feels safe.
Click to expand...
Click to collapse
The edges of the screen sometimes take a few tries to respond!
I have this case. Its fantastic for work. Its awfully bulky though! But, with that bulk you get great protection.
Its great if you need the protection. I typically remove the phone from the case when I'm home.
GreenXSniper said:
If you do this, make sure you after you pop the built in screen protector off you scrape off the black adhesive that held it on or it will fuse to your screen protector and rip it off if you take off your case. Any small metal tool can be used but be careful not to scratch the case. After its removed you can use some qtips and a little bit of rubbing alcohol to clean any residual adhesive.
I didn't do this originally and my case was stuck to my screen protector for 2 months till I finally decided to try and force it off and it ruined my screen protector.
Click to expand...
Click to collapse
This is what I described doing in a different topic - used an X-Acto knife and it took about 10 minutes to get all the plastic protector's adhesive off, which I felt might stick or lift up the lip of their case on the actual screen protector I'm using.
However, I also found that the Supcase didn't sit perfectly flush on the Nexus 6 with my own screen protector after removing their plastic one - one longer side has a gap between the frame and my protected phone surface.
So, I am keeping this case as a backup, only.
- ooofest
Just got this case from EBay .I must say Dam good quality cases an holster love it..actually kind of like its design an fit better then Otterbox...feels more solid..
Had the case for a while its pretty good. Not a daily case for me as I switch when doing different jobs. It's actually kind of hard to get off that's a good thing for some people.
I've just had to return mine after using it for a few days. When taking pictures with the rear camera flash on, the flash and case don't work well together and the pictures are spoilt (first pic is with case, second without. You can see the tint that having the white case on causes). Disappointing as I have already had the screen break on me (first time ever!) and was happy of the extra protection that this case affords
For the most part I go naked with my N6. I am ordering one of these cases for when I go golfing and maybe some other activities where I want to have the best protection. I am keeping the supplied protector cause it will keep dust and water from getting on my phone. Which is, by the way, the reason I am going with this brand because most of the other "tough" cases don't have that.
How does this case fit around the speakers? Is it open letting dust in under the screen protector or are the speakers sealed?
They are open, dust can accumulate
I've been using mine for months now with no problems. only complaint is the camera port is long. Dust an small debris gets under screen protector, its slightly bulky but worth the protection. Both factory screen protector an case built-in on an notice a little touch sensitivity loss, but worth the protection! Add the fact that the N6 is water resistant an its damn near perfect!
Hi
I have this case :
https://www.spigen.com/products/galaxy-s8-case-crystal-shell
I tried both Samsung original plastic screen protector:
https://www.youtube.com/watch?v=cQKnJsETNYQ
And the olixar case friendly glass screen protector.
Both suck. Either the touch is bad either the case lifts it up.
Can anyone recommend me a screen protector that will get a long with my case? or any combination of screen protector and a case that will work together?
No glue / wet apply please. Only conventional stuff
Thanks
From what I have seen the gpel case friendly screen protectors seem to be about the best option.
They come in clear or black edges I hear the clear shows dirt build up around the edges
Do you mean this one
https://www.amazon.com/Protector-Friendly-Tempered-Satisfaction-Guarantee/dp/B06XWMZG5N
Cause it's rating is pretty poor
Whitestone dome?
How badly does it affect the touch?
ttl100 said:
How badly does it affect the touch?
Click to expand...
Click to collapse
Not at all... Touchscreen works perfectly. And works with lots of cases https://youtu.be/sScL3ZyGTgI
It only takes some time to install it correctly, you can't rush it and expect great results.
But you better check some install videos, and the topics here on xda. Since this is glued to the screen, not just a strip on the edges, this feels as good as the naked screen and no dust can get beneath
I prefer something without glue/ liquids..
Whats the best dry apply option on the market?
It's wet apply, but I've had no issues with this one besides it taking a little extra time to adhere to the curved edges. it's been perfect on my case (not the same one) and looks good as well. Lifetime warranty too. https://www.amazon.com/gp/product/B072B8MLF3/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
When I first got my S8+, I was worried the back glass would scratch easy (turns out I was right ), so I wanted to protect it, even though I knew I would have a case on it. I've seen dirt get between phones and cases before and cause horrible scratches.
I first tried a clear wet application skin from BSE, but I could never make it look right. The midnight black shoes every imperfection and bubble, whereas my wife's Orchid Grey looks perfect with the skin on. You can't tell it's there, even on the sides.
So I began thinking it would be nice if someone made a tempered glass protector for the back. The sides are curved, but so is the screen, and there's plenty of TGSPs on the market. But I couldn't find any.
Then last week I saw one on Amazon. It comes with a full screen TGSP, a TGP for the back, and a TGP for the camera. Link is below.
It appears the back protector is like other TGSPs. It has no glue on the middle, just along the edges. That's not a big deal, as I would apply it like I did my TGSP. I would remove the adhesive strip on the edge and use LOCA to adhere it fully to the phone. Most camera lens TGPs get horrible reviews on Amazon, so it would likely go in the trash.
I'm trying to decide what to do. Here are my pros and cons, but I wanted everyone else's opinion, and also want to know if anyone else has any experience with this set. Again, I'm currently using a TGSP for the screen, so this is a question about the TGP for the BACK.
Pros:
*Protection for the back cover as well as the front.
*Protects from scratches and adds some drop protection
*Protectors are both glass, so it would still feel like a naked device.
*Back protector is Crystal clear, and with LOCA, would show off the beautiful black back glass without any bubbles, glare, etc.
*Glass doesn't get marks and dents like wet application protectors.
Cons:
*It would (probably) be too thick to use a case, so increased chance of damage if dropped.
*These TGSPs typically use cheap oleophobic coatings, so it would still be a fingerprint magnet on the back.
*This would leave a ridge around the screen and the back protector, so it MAY make it uncomfortable to hold.
*No protection for the side frame
*It will scratch (but can always be replaced
*I wish the cutouts were more precise. I'd like three separate cutouts for camera and sensors, not one big one. Would make it more seemless.
Again, looking for other thoughts and opinions and any experience.
No offense, but if all you have to say is that you go naked and have no scratches, or that you don't like screen protectors, then please don't reply. I'm not interested in a screen protector debate. I'm only interested in your opinions about this particular set and using a protector on the back. Also, I know about the liquid nano stuff and have no interest in it. I've seen all the reviews.
Thanks!
JimBird Tempered Glass Screen Protector Front + Back + Camera Lens Protector For Galaxy S8 Plus S8+ 9H Anti-Scratch Anti-Fingerprint https://www.amazon.com/dp/B073S4YZW1/ref=cm_sw_r_cp_apa_MohHzbHWHA99A
Mr. Orange 645 said:
When I first got my S8+, I was worried the back glass would scratch easy (turns out I was right ), so I wanted to protect it, even though I knew I would have a case on it. I've seen dirt get between phones and cases before and cause horrible scratches.
I first tried a clear wet application skin from BSE, but I could never make it look right. The midnight black shoes every imperfection and bubble, whereas my wife's Orchid Grey looks perfect with the skin on. You can't tell it's there, even on the sides.
So I began thinking it would be nice if someone made a tempered glass protector for the back. The sides are curved, but so is the screen, and there's plenty of TGSPs on the market. But I couldn't find any.
Then last week I saw one on Amazon. It comes with a full screen TGSP, a TGP for the back, and a TGP for the camera. Link is below.
It appears the back protector is like other TGSPs. It has no glue on the middle, just along the edges. That's not a big deal, as I would apply it like I did my TGSP. I would remove the adhesive strip on the edge and use LOCA to adhere it fully to the phone. Most camera lens TGPs get horrible reviews on Amazon, so it would likely go in the trash.
I'm trying to decide what to do. Here are my pros and cons, but I wanted everyone else's opinion, and also want to know if anyone else has any experience with this set. Again, I'm currently using a TGSP for the screen, so this is a question about the TGP for the BACK.
Pros:
*Protection for the back cover as well as the front.
*Protects from scratches and adds some drop protection
*Protectors are both glass, so it would still feel like a naked device.
*Back protector is Crystal clear, and with LOCA, would show off the beautiful black back glass without any bubbles, glare, etc.
*Glass doesn't get marks and dents like wet application protectors.
Cons:
*It would (probably) be too thick to use a case, so increased chance of damage if dropped.
*These TGSPs typically use cheap oleophobic coatings, so it would still be a fingerprint magnet on the back.
*This would leave a ridge around the screen and the back protector, so it MAY make it uncomfortable to hold.
*No protection for the side frame
*It will scratch (but can always be replaced
*I wish the cutouts were more precise. I'd like three separate cutouts for camera and sensors, not one big one. Would make it more seemless.
Again, looking for other thoughts and opinions and any experience.
No offense, but if all you have to say is that you go naked and have no scratches, or that you don't like screen protectors, then please don't reply. I'm not interested in a screen protector debate. I'm only interested in your opinions about this particular set and using a protector on the back. Also, I know about the liquid nano stuff and have no interest in it. I've seen all the reviews.
Thanks!
Click to expand...
Click to collapse
I was thinking about the same thing, this post is very helpful.
Mr Orange, I am thinking on the same lines as you were. Did you end up buying the JimBird TGSP? If so, what are your opinions of it and how well did it work for you? It seems like something simple to offer, but so hard to find. Thanks!
Hi, I am getting the S23 ultra soon and was wondering, am I best leaving Samsung's film screen protector on, or will this not really offer much protection?
Am I best taking this off and putting my own?
I was looking at these UV glass ones, which I don't really have experience with, they are all a little on the dear side in comparison to the glass ones that are ready to stick.
I tend to prefer glass as it feels like more protection and touch / fingerprint still works fine and also tends not to suffer air bubbles as much.
Regards
James
You dont get a screen protector on it when it arrives
After years of using the UV product you mentioned (whitestone dome) I settled on the practical plastic films. These are very cheap, you can get 2 or 3 at just $10, they avoid scratching mainly and the feel is not as good BUT cleaning up the screen after removing the protective UV glass is a nightmare, replacements cost $40 to $60 in case it breaks or dents. The plastic film doesn't really dent and it's much thinner and as far as my experience goes most cases are compatible with the plastic one, in contrast with the UV glass. Furthermore, the installation of the glass is not "for everyone", I am used to do precision work with my hands and the installation process is not something I would recommend to an inexperienced person: some glue is going to get outside while curing the screen with the UV lamp and it can infiltrate in your mic holes or in the small gap between the display and the frame. Last but not least, if you want to use the phone without a case with the glass you get a noticeable step on all 4 sides which is very uncomfortable especially if you use gestures. If you want to give it a try, is something you can live with and it has for sure benefits as far as feeling and protection. On the other hand, all the above issues remain. Sorry for the bad grammar and punctuation, I'm in a hurry. I hope my comment helps you decide for the best!
s3fan said:
You dont get a screen protector on it when it arrives
Click to expand...
Click to collapse
That's a bummer, they have as far as I know, at least on the flagships since the S10
Sprov said:
After years of using the UV product you mentioned (whitestone dome) I settled on the practical plastic films. These are very cheap, you can get 2 or 3 at just $10, they avoid scratching mainly and the feel is not as good BUT cleaning up the screen after removing the protective UV glass is a nightmare, replacements cost $40 to $60 in case it breaks or dents. The plastic film doesn't really dent and it's much thinner and as far as my experience goes most cases are compatible with the plastic one, in contrast with the UV glass. Furthermore, the installation of the glass is not "for everyone", I am used to do precision work with my hands and the installation process is not something I would recommend to an inexperienced person: some glue is going to get outside while curing the screen with the UV lamp and it can infiltrate in your mic holes or in the small gap between the display and the frame. Last but not least, if you want to use the phone without a case with the glass you get a noticeable step on all 4 sides which is very uncomfortable especially if you use gestures. If you want to give it a try, is something you can live with and it has for sure benefits as far as feeling and protection. On the other hand, all the above issues remain. Sorry for the bad grammar and punctuation, I'm in a hurry. I hope my comment helps you decide for the best!
Click to expand...
Click to collapse
I swear by these whitestone dome protectors. The newest versions (I have one on my S23U) come with stickers to seal the buttons and edges when you install so you don't get any glue in the buttons.
If one watches the video, the installation process is relatively fool proof. I've not yet had a bad installation and the glass has saved my phone more than once.
Fingerprint sensor sensitivity is reduced somewhat but still functions perfectly.
IMHO, these are far and away the best protectors and I'd not use any other.
Getting on my high horse here to ***** about the hypocrisy around "saving the planet" by not providing a screen protector....it's all virtues signaling and real cheap ass practice.
Look what resulted from buying a screen protector from Scamazon (add gas burned, electricity, etc ) to see the "savings"
dl12345 said:
I swear by these whitestone dome protectors. The newest versions (I have one on my S23U) come with stickers to seal the buttons and edges when you install so you don't get any glue in the buttons.
If one watches the video, the installation process is relatively fool proof. I've not yet had a bad installation and the glass has saved my phone more than once.
Fingerprint sensor sensitivity is reduced somewhat but still functions perfectly.
IMHO, these are far and away the best protectors and I'd not use any other.
Click to expand...
Click to collapse
I completely agree that as far as protection Whitestone Dome is the best you can get - but that was not in question.
I also agree that the procedure is pretty straightforward but you would be amazed knowing how MOST people can screw up easy things. Not everyone has decent manuality: people actually pay to get cheap screen protectors installed by some "specialized tecnician". I am someone who fixes its stuff to the point of soldering components, just for curiosity and because I enjoy it, but most people don't want to deal even with screen protectors
robbo1947 said:
That's a bummer, they have as far as I know, at least on the flagships since the S10
Click to expand...
Click to collapse
yeah it looks like they stopped including them with S22 Ultra. My S21U came with a screen protector and the S22U didn't. I'm from EU if it matters.
Sprov said:
I completely agree that as far as protection Whitestone Dome is the best you can get - but that was not in question.
I also agree that the procedure is pretty straightforward but you would be amazed knowing how MOST people can screw up easy things. Not everyone has decent manuality: people actually pay to get cheap screen protectors installed by some "specialized tecnician". I am someone who fixes its stuff to the point of soldering components, just for curiosity and because I enjoy it, but most people don't want to deal even with screen protectors
Click to expand...
Click to collapse
I'm also thinking if I want to have the TMax UV Dome installed on my S23 Plus but I'm reading mixed reactions with using UV Dome. I won't install it myself so that's out of the question. But that screen protector also covers the front camera which sucks and I don't know how good/bad it is. I know it's from China but so is Whitedome.
Some experienced users told me to use a TPU film instead, like the ArmorSuit wet install film. The display of the S23 is very good and it just needs a simple TPU screen protector to protect it from unavoidable scratches. Is the difference in feeling between a TPU and tempered glass protector that significant? What else made you suggest using TPU instead of glass?
kevindd992002 said:
I'm also thinking if I want to have the TMax UV Dome installed on my S23 Plus but I'm reading mixed reactions with using UV Dome. I won't install it myself so that's out of the question. But that screen protector also covers the front camera which sucks and I don't know how good/bad it is. I know it's from China but so is Whitedome.
Some experienced users told me to use a TPU film instead, like the ArmorSuit wet install film. The display of the S23 is very good and it just needs a simple TPU screen protector to protect it from unavoidable scratches. Is the difference in feeling between a TPU and tempered glass protector that significant? What else made you suggest using TPU instead of glass?
Click to expand...
Click to collapse
If using the plus, it has a flat screen and UV glass isn't necessarily needed. The UV glass really excels in the curved screen market where most of the glass screens only have glue in the corners or have other issue towards the edges. The liquid glue allowed for better flash adherence to the screen. For the plus I would just get highly rated 9h tempered glass.
who cares? said:
If using the plus, it has a flat screen and UV glass isn't necessarily needed. The UV glass really excels in the curved screen market where most of the glass screens only have glue in the corners or have other issue towards the edges. The liquid glue allowed for better flash adherence to the screen. For the plus I would just get highly rated 9h tempered glass.
Click to expand...
Click to collapse
I see. But how about the problem with the fingerprint sensor? I see a lot of people having issues when using a tempered glass protector with their Samsung fingerprint sensors. And that's why most of them say that a TPU film is enough.
Thanks for everyone's replies, after a lot of fear, hassle, and a bit of a loss of money I decided on a film protector which is working 100% fine.
Not sure if I just picked rubbish glass screen protectors, but they caused me big issues. Neither would work with fingerprint reader and because they were hard, my original case was lifting the sides of the protector a bit, meaning touch was less sensitive.
The first glass protector I tried was UV and when it came to taking this off, that was a little scary with this brand-new phone!
Trying to peel it back off was a hard job, was very stuck and was actually cracking as I was slowly lifting it off.
So now I have a different case that doesn't affect the protector and a film protector and all seems good now
kevindd992002 said:
I see. But how about the problem with the fingerprint sensor? I see a lot of people having issues when using a tempered glass protector with their Samsung fingerprint sensors. And that's why most of them say that a TPU film is enough.
Click to expand...
Click to collapse
Very little issues. Honestly it's works as well as the tpu film did I had on my s21 ultra. I wanted glass over the film on the ultra because of the pen. I wasn't sure how the pen tip would work with indenting the tpu film. I like the feel of the glass a lot better.
Before my S23U arrived I already had the case and glass ready. Didn't even power it on first, but went right away and applied this UV glass.
No issues with case causing glass come off. Glass needs to be perfectly aligned.
I did the same with my N9 that I traded in - not a scratch anywhere, although I dropped it few times and the UV glass saved it And I had N9 for full 4 years..
No issues when I took the glass off before shipping N9 back to Samsung.

After using these on my S21 Ultra, I purchased the same for my S23 Ultra and installed it today. Took about 15 minutes and extremely happy with the results. Feels like the original glass and most times don't even notice it's on. Additionally, customer support is top notch. Any issues and they send out replacements without issue. They're also available for installation support if needed.
The key is to watch the installation video and read the instructions multiple times and clean clean clean the phone.
https://www.amazon.com/dp/B0BMDLDPY6?psc=1&ref=ppx_yo2ov_dt_b_product_details
I live in Asia and use Zeelot glass screen uv protector. Fingerprints work well and didn't have issue with my case
I used DomeGlass from Note9 (was little thick)>N20U and S22U and overall was good and happy but usually after few months under glass I saw "spider web" from glue on the edges.
Now in my S23U use Polish product like 3mk film and I am positive surprised good quality- thin, good sticks on the edges and low dirt from fingers similar, smooth spen use.
In this year don't miss to domeglass.
Nevertheless dome glass is good product but very expensive, installation with YT step by step is even easy
_GRIZZLY_ said:
I used DomeGlass from Note9 (was little thick)>N20U and S22U and overall was good and happy but usually after few months under glass I saw "spider web" from glue on the edges.
Now in my S23U use Polish product like 3mk film and I am positive surprised good quality- thin, good sticks on the edges and low dirt from fingers similar, smooth spen use.
In this year don't miss to domeglass.
Nevertheless dome glass is good product but very expensive, installation with YT step by step is even easy
Click to expand...
Click to collapse
I'm thinking of original samsung screen protector, however there are very bad reviews from one that it is not easy to put it on, but ppl who manage to do it are very happy, no peel of on screen edge and good feeling with finger. What exactly 3mk model of film You use? Hammer maybe?
aureum said:
I'm thinking of original samsung screen protector, however there are very bad reviews from one that it is not easy to put it on, but ppl who manage to do it are very happy, no peel of on screen edge and good feeling with finger. What exactly 3mk model of film You use? Hammer maybe?
Click to expand...
Click to collapse
Yes, I think too about original samsung screen protector but I will buy it after receive points (about few days) thanks to buy phone in official site. Change my 3mk if I see issues but after 1 week (I know it's small period time) all is fine with case spigen tough armor.
However I don't sure that later, will not unstick because is full dimension from corner to corner with my case.
Easy wet application like similar film protectors.
Mine is 3mk Silver protection:
Folia na ekran Samsung Galaxy S23 Ultra - 3mk SilverProtection+
Antyuderzeniowa folia ochronna, wzmacnia ekran do 400%, powłoka samoregenerująca, łatwy montaż. Zabezpiecz Samsung Galaxy S23 Ultra. Oficjalny sklep producenta
sklep.3mk.pl
This is local product of my country - Poland
i use domeglass and spigen ultra hyprid clear case, because of Red Color from phone.
Its fit perfect together.
Hi all,
I have a spigen neoflex TPU protection on my s23 ultra, with a plastic spigen case.
I've bought an official Samsung leather case, and it seems really nice.
But, the neoflex is a bit to short on the sides, so that my finger feels the border of the screen protection every time I swipe left or right.
So, I would like to replace the neoflex with a tempered glass protection.
Do you know one who will fit well?
I have had a really bad experience with an Oppo find X5 pro : I've tested 5 tempered glass brands and every time my beautiful official Kevlar case unglued the tempered glass in the corners...
Thank you for your help
Whitestone dome or Spigen have been the best in my experience.
Avoid amfilm at all costs.
I have domeglass with leather samsung cover. In my opinion everything is fine. Of course glass not cover full screen and is about 1,5 mm smaller than all screen - safe "bumper" for covers.
I have too spigen optic armor and with domeglass is perfect fit, no one gap between case and glass but I seldom use this spigen.
Since S23 Ultra has a curved screen, I dont really think you should get a tempered cause either they dont cover the curved area or if they do, I dont really trust the protection they offer. For Curved Screen, I suggest getting a Screen Protector Film just to be safe. There is a Full-Body Screen Protector from Gadgetshieldz that covers the screen and other parts of the device like the sides, back and camera. Cases dont necessarily help with the scratches cause Ive seen multiple devices getting permanent marks inspite of the cases mostly due to the dust and things. So best to keep everything protected with either a Skin or a Full-Body protector. They also provide Skins if thats what you prefer.
Prakash_Raj said:
Cases dont necessarily help with the scratches cause Ive seen multiple devices getting permanent marks inspite of the cases mostly due to the dust and things
Click to expand...
Click to collapse
Exactly, I saw too. Refers to people who don't pull off case for months to clean
_GRIZZLY_ said:
Exactly, I saw too. Refers to people who don't pull off case for months to clean
Click to expand...
Click to collapse
Yaa I swear. All my previous devices had this issue. Ive used the best of the best cases and they still have these tiny scuffs which are permanent. This reduced the resale value of my devices and thats when I opted for this Full-Body Coverage cause I really dont mind spending a bit more to avoid these permanent damages. Im thinking of getting it wrapped with Skins next time.
So I am happy with still good stick fabric foil around frame .
Sometimes better use only minimalistic covers, not too bulky and happy with device than see scratches or crack after more time with angry tell "what was it for all this protections"
_GRIZZLY_ said:
So I am happy with still good stick fabric foil around frame .
Sometimes better use only minimalistic covers, not too bulky and happy with device than see scratches or crack after more time with angry tell "what was it for all this protections"
Click to expand...
Click to collapse
Both screen protectors and skins they provide barely adds any bulk. they are literally as thick as a sheet of paper and I dont think you can go any thinner