Hi
I noticed that since i have installed a few apk watch faces the stock watch faces of the amazfit stratos do not apply ny more.
Also a few of them are missing.
I now run rom version 2.3.9.0
Can someone tell me if its ok to flash a new rom even if its older from the one running now?
Thanks a lot
There were changes in the libraries used by watchfaces since Stratos INTL firmware 2.3.8.0 (the same applies to Pace CN 2.6.50 and probably next Pace INTL firmware as well), so you must uninstall all APKs you have and check if developers has released a new version that is compatible.
Related
Hello
I have seen several new releases for the amazfit bip but I do not see any description....
Ex. Version Mi Fit 3.3.2.1
What's new in this firmware?
If there is not a dedicated page for firmware versions and description, we might use this thread to talk about new firmware features.
Thanks
Mainly firmware 0.1.0.99 seems to create a lot of issues when using the watch with notify & amazfit...
Is there a repository of the different firmwares anywhere?
Fw 0.1.1.14
Is there a firmware version, recent or not that creates no issues with tools & amazfit ? Bought the damn thing, paired once, now the watch randomly disconnects and cannot reconnect even if I factory reset, uninstall tke t&a or unpair/pair. Before that it was perfect.
Yes install the latest mifit and you will get updates to the latest version.... I think it is v.1. 1.25
lemmon said:
Yes install the latest mifit and you will get updates to the latest version.... I think it is v.1. 1.25
Click to expand...
Click to collapse
I updated via Notify and the FW is 0.1.1.31
Hebrew font for Amazfit bip -only for notification
Can some one help with adding hebrew font to amazfit bip only for notificashion (not to translate the interfase, only for notificashion) ???
My FW is V0.1.1.36
Hello,
I have Amazfit watch app v2.5.2.1 on my android phone.
But I found there is a new version 2.6.0.1 on APKmirror.com while this version doesn't exist on Google Playstore.
I would like to know which one is official version.
Do I need to update my app?
Thanks.
fat100 said:
Hello,
I have Amazfit watch app v2.5.2.1 on my android phone.
But I found there is a new version 2.6.0.1 on APKmirror.com while this version doesn't exist on Google Playstore.
I would like to know which one is official version.
Do I need to update my app?
Thanks.
Click to expand...
Click to collapse
My issue is:
On my phone, the VO2max value appeared once after running workout. The value was then disappeared the day after while it always stayed on the watch.
Do you have the same thing? Is it normal?
Hi,
yesterday I installed some apk new watchfaces in my Amazfit Pace international version:
model: A1612
version ROM: 2.8.3.0
Custom watchfaces works well, but it's impossible to use stock watchfaces both by watch and by mobile Amazfit app. When I choose one of them they are showed as enabled in My Watch section of the app but the Pace continue to show custom apk watchface.
Who can help me?
Probably the APK watchface isn't compatible with your firmware. As of now, there are 3 versions:
- Old "Pace" versions (WOS1, Pace with INTL firmware 1.x.y or CN firmware older than 1.0.39/1.0.40, I don't remember now);
- Common "Stratos" version, WOS2 besides newest versions (older than Stratos INTL 2.3.7.0 and Pace CN 2.6.5.0);
- Newest WOS2 version, for latest firmwares (same or newer than the ones above).
I don't have a Pace with INTL firmware so I am not sure is 2.8.3.0 use the common or newest versions. Anyway, you should remove all of them, restart watch, install them one by one while restarting watch after each install to test. And avoid installing many as they may conflict to each other...
lfom said:
Probably the APK watchface isn't compatible with your firmware. As of now, there are 3 versions:
- Old "Pace" versions (WOS1, Pace with INTL firmware 1.x.y or CN firmware older than 1.0.39/1.0.40, I don't remember now);
- Common "Stratos" version, WOS2 besides newest versions (older than Stratos INTL 2.3.7.0 and Pace CN 2.6.5.0);
- Newest WOS2 version, for latest firmwares (same or newer than the ones above).
I don't have a Pace with INTL firmware so I am not sure is 2.8.3.0 use the common or newest versions. Anyway, you should remove all of them, restart watch, install them one by one while restarting watch after each install to test. And avoid installing many as they may conflict to each other...
Click to expand...
Click to collapse
Thanks for your help!
After a factory reset I try to add the custom watchfaces one by one and I found some of them didn't work properly.
Hello,
I have rooted my Stratos based on version 2.3.10.5 few months ago.
A new version 2.3.11.0 is now available. I receive regularly OTA notifications on the watch but when I accept to install it directly from the watch or from the Amazfit app, the watch seems to install it, reboot, but at the end, my Stratos is stucked on the V2.3.10.5.
Is there somebody who could explain me how to upgrade the watch?
I don't care if I lose the root which is not very usefull.
Thank you very meuch.
you can use this installer - https://androidfilehost.com/?fid=4349826312261662369
or use Saratoga's pack of latest full rom - https://forum.xda-developers.com/smartwatch/amazfit/fw-tool-stock-international-firmware-t3764636
1immortal said:
you can use this installer - https://androidfilehost.com/?fid=4349826312261662369
or use Saratoga's pack of latest full rom - https://forum.xda-developers.com/smartwatch/amazfit/fw-tool-stock-international-firmware-t3764636
Click to expand...
Click to collapse
Thank you very much 1immortal.
Upgrade successfull !
This new rom v2.3.11.1 is very good.
Autonomy is much better: up to 7 days !
Hello,
I recently bought Stratos+ and it was working fine. It requested updates so I allowed them.
Few hours after updating to the latest firmware, the buttons are misbehaving and the touchscreen stopped working. (see video)
Except for the buttons and the touchscreen, all other accessible features seem to be working just fine.
Is there any solution to this problem? It seems software connected.
Please help.
Have you tried factory reset?
Tzar92 said:
Have you tried factory reset?
Click to expand...
Click to collapse
I tried resetting with the "unpair" function from the app. Otherwise, I cannot control the watch as you can see in the video.
You should use Tool_All_In_One. From there, you can control somehow your device. Reboot for example.
[TOOL] TOOL ALL IN ONE (Drivers|Unlock|TWRP|Factory Image|Stock Recovery)
Hello everyone, today I present my new creation: we are talking about a tool that allows you to do many things , from the bootloader to flash the factory image , comfortably. Now you're probably asking: but there are already other tools available...
forum.xda-developers.com
Thanks for your suggestions, I tried everything even installing the hybrid mod by @Saratoga79 .
Nothing worked, it's probably a hardware issue.
If there's a way to control the device via phone or its buttons please share.
I can't even use the heart tracker this way. It barely works with watchdroid, but it's not convenient at all.
I don't know which hybrid Mod from Everest you have installed but you should post your issue in the relevant "subject" in the forum asking for support. I guess that if you have installed a custom ROM like Everest, you should be able to send adb commands and restore from scrtach everything. My advise: post your problem on the forum and provide as much info as you have (model, version, etc.. ). Looks like you have a Stratos (not an S3 at least), so the forum is here for the hybrid ROM:
PACEficator Project|Hybrid ROM 2.0.84.0 v2.8 Installer|Stratos & Pace (2021/01/29)
PACEficator Project|Hybrid ROM 2.0.84.0 v2.8 Installer|Stratos & Pace (2021/01/29) THIS IS NOT FOR AMAZFIT VERGE OR STRATOS 3 THIS IS NOT FOR AMAZFIT VERGE OR STRATOS 3 THIS IS NOT FOR AMAZFIT VERGE OR STRATOS 3 I am not responsible for...
forum.xda-developers.com