Code:
#include <std_disclaimer.h>
/*
* Your warranty is... still valid?
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this Kernel
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
NOTE »
This kernel will be directed for performance, and to be closest to 3.10 kernel, as much as possible. with several tweaks from other kernels and versions.
So don´t cry for battery. This device has a 2520mah battery with a 28nm processor.
FEATURES »
» Governors - All the stock one's and
- alucard, blu_active, Lionheart, nightmare, smartmax/smartmax_eps, yankactive, zzmove
» Io-scheds - All the stock one's and
- fiops, sioplus, tripndroid, zen
» KCAL support
» More agressive LMK (Low memory killer)
» Gestures-
- Double tap to wake, Sweep to wake, Sweep to sleep -> still not working
» Many more....
INSTALLATION »
- Flash zip via recovery
DOWNLOADS »
AFHost: https://androidfilehost.com/?fid=1395089523397900668
XDAevDB Information
Diamond Kernel for Onyx
Contributors
Marado
Source Code: https://github.com/mynameismarado/Diamond-onyx
For Android 8.x.x / 9.x.x
Version Information: 1.0
Status: Beta
Last Updated 2019-02-24
XDA:DevDB Information
Diamond, Kernel for the OnePlus X
Contributors
Marado
Kernel Special Features:
Version Information
Status: Beta
Current Beta Version: 1.0
Created 2019-02-24
Last Updated 2019-02-24
XDA:DevDB Information
[KERNEL][3.4.113][O/P] Diamond [email protected], Kernel for the OnePlus X
Contributors
Marado
Kernel Special Features:
Version Information
Status: Testing
Created 2019-03-12
Last Updated 2019-09-10
Changelog:
»1.0 - Initial release
> 2.1 - fixed wifi, hotspot, added spectrum support
and updates from 3.10 kernel.
Thanks ! Will test and report
PS : Can you add [KERNEL] to the name? And give it a name. I'd propose "K-Marado" ^^
Edit : you named it Diamond. Sorry I just see it now...
It flashes OK.
Now, we can share our tweaking tips to extend battery life of our fragile Onyx ..
I'm testing Yankactive with multicore energy saver.
PS : I found weired that all the CPU section is on 0 (Fq entry boost, synchro threshold...)
DTTW works for me...
Kéno40 said:
It flashes OK.
Now, we can share our tweaking tips to extend battery life of our fragile Onyx ..
I'm testing Yankactive with multicore energy saver.
PS : I found weired that all the CPU section is on 0 (Fq entry boost, synchro threshold...)
DTTW works for me...
Click to expand...
Click to collapse
I can´t edit this thread.... don´t know why
Dt2w Works, is swipe gestures that wont work yet...
Marado said:
Code:
#include <std_disclaimer.h>
/*
* Your warranty is... still valid?
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this Kernel
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
NOTE »
This kernel will be directed for performance, and to be closest to 3.10 kernel, as much as possible. with several tweaks from other kernels and versions.
So don´t cry for battery. This device has a 2520mah battery with a 28nm processor.
FEATURES »
» Governors - All the stock one's and
- alucard, blu_active, Lionheart, nightmare, smartmax/smartmax_eps, yankactive, zzmove
» Io-scheds - All the stock one's and
- fiops, sioplus, tripndroid, zen
» KCAL support
» More agressive LMK (Low memory killer)
» Gestures-
- Double tap to wake, Sweep to wake, Sweep to sleep -> still not working
» Many more....
INSTALLATION »
- Flash zip via recovery
DOWNLOADS »
AFHost: https://androidfilehost.com/?fid=1395089523397900668
XDAevDB Information
Diamond Kernel for Onyx
Contributors
Marado
Source Code: https://github.com/mynameismarado/Diamond
For Android 8.x.x / 9.x.x
Version Information: 1.0
Status: Beta
Last Updated 2019-02-24
XDA:DevDB Information
Diamond, Kernel for the OnePlus X
Contributors
Marado
Kernel Special Features:
Version Information
Status: Beta
Current Beta Version: 1.0
Created 2019-02-24
Last Updated 2019-02-24
Click to expand...
Click to collapse
Wifi broken and my phone hang when i turn on , need long press power button for restart
rizkal said:
Wifi broken and my phone hang when i turn on , need long press power button for restart
Click to expand...
Click to collapse
I had some problem too while switching on and off data and wifi while I was at home (with a Wifi connected).
Waiting new update
Kéno40 said:
Thanks ! Will test and report
PS : Can you add [KERNEL] to the name? And give it a name. I'd propose "K-Marado" ^^
Edit : you named it Diamond. Sorry I just see it now...
Click to expand...
Click to collapse
Which rom/s have you tested this kernel on?
dchrono said:
Which rom/s have you tested this kernel on?
Click to expand...
Click to collapse
LOS but I'm on RR now
Using this kernel now. Could you add voltage controls?
OnePlusXDA said:
Using this kernel now. Could you add voltage controls?
Click to expand...
Click to collapse
I will in further updates...
right now fixing wifi issue. Kernel was tainted...
Diamond kernel No update anymore??
rizkal said:
Diamond kernel No update anymore??
Click to expand...
Click to collapse
probably it will be... because i was go to make an announcement of no more further updates, because i switched to another device but now that device is bricked...
now i´m back on my old beloved Onyx.... so going back to work on Diamond Kernel...
sorry for bad english....
Xiaomi?
Mi9 SE?
Marado said:
probably it will be... because i was go to make an announcement of no more further updates, because i switched to another device but now that device is bricked...
now i´m back on my old beloved Onyx.... so going back to work on Diamond Kernel...
sorry for bad english....
Click to expand...
Click to collapse
Do you develop kernels exclusively? Would/have you built any ROMs?
Kéno40 said:
Xiaomi?
Mi9 SE?
Click to expand...
Click to collapse
My other phone? No.
Vodafone Smart X9.
but now im going to buy the Mi9t pro when will be released...
BuzzBradA said:
Do you develop kernels exclusively? Would/have you built any ROMs?
Click to expand...
Click to collapse
I´ve already built roms, but now there is a few Pie roms working quite well, that i will be focusing
on the Kernel side.
Wireguard Kernek
Possible for you to add wireguard kernel module into this kernel?
jonafegi said:
Possible for you to add wireguard kernel module into this kernel?
Click to expand...
Click to collapse
Wireguard only support >3.10 kernels forward.... this is 3.4.
"maybe one day bumps to 3.10" it´s not an easy task...
Still waiting your update kernel
Related
RenderBroken's Custom Kernel for AOSP/LG Based Roms!
Code:
/* *** Disclaimer
*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards, thermonuclear war,
* or you getting fired because the alarm app failed. Please do some research
* if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
I am fairly new to Android Development but started out because I wanted to learn and to share what i have learned so far. My goal with this kernel is to be a very fast and stable build that offers some things that the other kernels do not. I want to initiate Development Discussions amongst the community. This will be a noob friendly thread as long as the new users follow 2 rules. First is to do some research before asking. Most likely your question has already been asked. If not in this thread then in another. Second is BE RESPECTFUL. You do these two things and even the most hardened Dev will assist you.
Current Features
General List:
* Built with Custom A15 Linaro 4.8.3 Toolchain thanks to pinkflozd
* -O3 and Linaro 4.8.3 patches
* Powersuspend Thanks yank555 and Faux
* Falcon_hotplug by Blechd0se!! Ultra Simple but even more effective!
* Intelliactive and Intellidemand from Faux
* sweep2wake (S2W) & doubletap2wake (DT2W)
* FIOPS, ROW, BFQ-v7, SIO, DEADLINE, NOOP, CFQ Schedulers
* Frandom
* GCC Tweaks for Cortex A15
* Color Calibration Thanks to Savoca
* KSM from CAF
* USB Fast Charge (ON/OFF Toggle)
* New LZ4 Compressor/Decompressor: Just plain fast!
* Numerous CAF Patches!
I recommend Tricktermod for Kernel Tuning
https://play.google.com/store/apps/details?id=com.bigeyes0x0.trickstermod
Instructions:
* Boot into Recovery
* (Recommended) Make a complete backup of entire rom
* Flash Zip
* Reboot
Download:
Mediafire Mirror
Changelog:
https://github.com/RenderBroken/render_kernel_msm8974
THANKS!!!!
First I want to say thank you to everyone who has answered my questions and responded to my pm's when I know they are busy with their own lives. Pretty much everyone I have come into contact with here on XDA has been truly helpful and respectful. Here is a list of people that had helped me in one way or the other:
myfluxi, Dorimanx, Neobuddy89, Savoca, Faux123, Blechd0se, and Many More!
Thank you guys! Without your contributions to the community we would not have the level of performance, stability and interaction that we have today
Official Testers
Thank you guys for your help with testing my kernels!
XDA:DevDB Information
[Kernel] Render Kernel for AOSP/LG ROMs [D80x/LS/VS980/F320x] , Kernel for the LG G2
Contributors
RenderBroken
Kernel Special Features:
Version Information
Status: Beta
Created 2014-07-03
Last Updated 2014-07-03
Reserved 1
Reserved 2
I see it right: there's only a lgd kernel for the d-802? An app shows me that I have an lgd panel, but dr87 says that is not definitely.
Matze060906 said:
I see it right: there's only a lgd kernel for the d-802? An app shows me that I have an lgd panel, but dr87 says that is not definitely.
Click to expand...
Click to collapse
I made this in the wrong thread.
RenderBroken said:
I made this in the wrong thread.
Click to expand...
Click to collapse
I don't mean a thread, I see it in your folder on mediafire...
Was reading the other thread you opened a few days ago....can't wait to try this out! Will flash when my charge cycle is done (later this evening). Thank you for bringing another kernel to our device! Glad to see more development for the G2 [emoji106][emoji2]
@RenderBroken, just flashed your kernel on my vs980 with Mahdi. Running great so far. Volume does seem a little bit lower than stock kernel. I know in the first thread you started someone stated that Mahdi is using N5 drivers instead of LG drivers, but just wanted to confirm the volume issue is present. Thanks for creating another kernel for us to use, and look forward to future developments you have planned.
Memebers please refer http://forum.xda-developers.com/lg-g2/development/kernel-render-kernel-aosp-lg-roms-t2803929 for the Kernel related information.
THREAD CLOSED.
Code:
Code:
Disclaimer
#include
*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this kernel
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
*/
Welcome Arrived Kernel for A5 2016
Features:
Linux v3.10.105
F2FS Support
various governors
gpu UC to 1.60Mhz
cpu UC to 0.3Ghz
fast, stable and cool
Permissive kernel
Safety Net Bypass
Instructions:
make sure you have this twrp installed
download zip and put it into phone's storage
enter TWRP recovery
flash zip
reboot and enjoy
XDAevDB Information
ArrivedKernel v1.0, Kernel for the Samsung Galaxy A5 2016
Contributors
@morogoku for source
@The Sickness for guide
and Everyone I cherry pick from
Source Code: https://github.com/ankitnaik1/SM-A510F.git
Version Information
Status: Stable
Current Stable Version: v1.0
Stable Release Date: 2017-04-10
Created 2017-04-10
Last Updated 2017-04-10
Reserved
Wooow i love u
ankitnaik16 said:
Code:
Code:
Disclaimer
#include
*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this kernel
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
*/
Welcome Arrived Kernel for A5 2016
thats really nice of you man ....we badly need a kernel dev
Features:
Linux v3.10.105
F2FS Support
various governors
gpu UC to 1.60Mhz
cpu UC to 0.3Ghz
fast, stable and cool
Permissive kernel
Safety Net Bypass
Instructions:
make sure you have this twrp installed
download zip and put it into phone's storage
enter TWRP recovery
flash zip
reboot and enjoy
XDAevDB Information
ArrivedKernel v1.0, Kernel for the Samsung Galaxy A5 2016
Contributors
@morogoku for source
@The Sickness for guide
and Everyone I cherry pick from
Source Code: https://github.com/ankitnaik1/SM-A510F.git
Version Information
Status: Stable
Current Stable Version: v1.0
Stable Release Date: 2017-04-10
Created 2017-04-10
Last Updated 2017-04-10
Click to expand...
Click to collapse
thats really nice of you man ....we badly needed a kernel dev like you ....
Fantastic job. Thank you. Will you work continue on this kernel?
Dev,can u try to enable bln?
Does cm 13 boot with it?
Thank You for good work!
But how to adjust lowest freq. to 300MHz. via init.d?
I try - echo 300 > /sys/devices/system/cpu/cpu1/cpufreq/scaling_min_freq (and so on, and so on)
It's didn't work.
Can you compile for a510m? the source it's update to marshmallow
IvoDi said:
Thank You for good work!
But how to adjust lowest freq. to 300MHz. via init.d?
I try - echo 300 > /sys/devices/system/cpu/cpu1/cpufreq/scaling_min_freq (and so on, and so on)
It's didn't work.
Click to expand...
Click to collapse
it is not working properly, anyways i am trying to add synapse support
NervReaper said:
Can you compile for a510m? the source it's update to marshmallow
Click to expand...
Click to collapse
ok I will try
ankitnaik16 said:
it is not working properly, anyways i am trying to add synapse support
Click to expand...
Click to collapse
Wow its great
Dose it have tap to wake option ? And thanx ^^
Tap to wake ?
Please can any one reply ? Does it have Tap to wake opt
good work
I wish you could release a permissive version of the 7.0 Kernel.
Some sound mods require a permissive kernel and frankly, once you get used to EXtremeMusic sound Mod, the stock sound is just aweful.
Hi.
I am on an A510F, MM, 601, Deluxe rom. I installed your kernel, the phone boots and enters the rom, but keeps restarting after 1 or 2 minutes.
Any idea about the cause and how can i fix this?
Thanks.
PS. After flashing your kernel I had to flash also SU2.79, as the phone was not rooted anymore. Also, I am using Adiutor in order to control the kernel.
dabuHTC said:
Hi.
I am on an A510F, MM, 601, Deluxe rom. I installed your kernel, the phone boots and enters the rom, but keeps restarting after 1 or 2 minutes.
Any idea about the cause and how can i fix this?
Thanks.
PS. After flashing your kernel I had to flash also SU2.79, as the phone was not rooted anymore. Also, I am using Adiutor in order to control the kernel.
Click to expand...
Click to collapse
can't say doesn't happen with me, my exam are going so I am busy now I will Update later on
ankitnaik16 said:
Code:
Code:
Disclaimer
#include
*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this kernel
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
*/
Welcome Arrived Kernel for A5 2016
Features:
Linux v3.10.105
F2FS Support
various governors
gpu UC to 1.60Mhz
cpu UC to 0.3Ghz
fast, stable and cool
Permissive kernel
Safety Net Bypass
Instructions:
make sure you have this twrp installed
download zip and put it into phone's storage
enter TWRP recovery
flash zip
reboot and enjoy
XDAevDB Information
ArrivedKernel v1.0, Kernel for the Samsung Galaxy A5 2016
Contributors
@morogoku for source
@The Sickness for guide
and Everyone I cherry pick from
Source Code: https://github.com/ankitnaik1/SM-A510F.git
Version Information
Status: Stable
Current Stable Version: v1.0
Stable Release Date: 2017-04-10
Created 2017-04-10
Last Updated 2017-04-10
Click to expand...
Click to collapse
can you add Always on Display and Bluelightfilter?
ankitnaik16 said:
can't say doesn't happen with me, my exam are going so I am busy now I will Update later on
Click to expand...
Click to collapse
Yas! An update coming! Please add double tap to wake option if possible! :laugh:
Good luck for your exams! ? Study well! :victory:
/*
* Your warranty is... Still valid??.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
WON'T WORK ON STOCK BASED ROM
Introduction:
The main objective of the kernel is to give to any user, a stock kernel with some tweaks like new CPU govenor focused on battery, performance and both of them, I/O scheduler, ...
Click to expand...
Click to collapse
Features:
Updated to lastest Motorola source
Kernel upstreamed to lastest source (3.18.63)
Lionfish, Bioshock, Zzmoove, PegasusQ CPU governors
FIOPS, ZEN I/O scheduler
Fingerprint boost driver
CRC check disabled (Performance boosted)
Vibration control
Sound control
Fsync support
Safetynet patch
Makefile: -0fast and Graphite optimizations
All feature of the boulzordev's kernel
Many other tweaks (check gitlab)
Click to expand...
Click to collapse
Download
Androidfilehost: https://www.androidfilehost.com/?w=files&flid=198747
Click to expand...
Click to collapse
How to flash:
1. Download Alize for Potter
2. Reboot to recovery
3. Flash kernel's zip
4. Reboot and tweak with proper app (Kernel auditor, Ex kernel manager, ...)
Click to expand...
Click to collapse
XDA:DevDB Information
Alize, Kernel for the Moto G5 Plus
Contributors
Martichou, Boulzordev, Flar2, Vache, fAiyaz, Nick
Source Code: https://gitlab.com/alize_kernel/Potter
Kernel Special Features:
Version Information
Status: Beta
Current Beta Version: 1.0.7
Created 2017-07-20
Last Updated 2017-07-20
Changelog:
Code:
v2.0
- Everything has been redone from scratch
- Switch to Gitlab and setting up CI
- Remove Barry-Allen (too old)
- Added ZEN I/O governor
- Upstream to 3.18.63
- Check Gitlab for more
v1.8
- PegasusQ cpu governor
- Kcal control
- Hight priority workqueue
- Some build fix
v1.7 | Public release
- Lastest source
- Barry-Allen, Lionfish, ... cpu governor
- FIOPS I/O scheduler
- CRC check disabled
- Spectrum support
- Many more on github
Good work! I'm liking the extra gov options. Performance is great with the default profile at the moment. I believe it's barryallen.
dpryor88 said:
Good work! I'm liking the extra gov options. Performance is great with the default profile at the moment. I believe it's barryallen.
Click to expand...
Click to collapse
Yes, default CPU governor is set to Barry-Allen.
Glad you like the kernel.
New build is up!
Check changelog.
Getting error, finger print hardware not available. Also there are 4 fingerprints saved and I can't delete them. Running smooth other than that
Edit,
Not sure what happened but I can't edit fingerprints anymore, I've even re flashed my old backup and kernel and tried re flashing the rom,
Before I flashed this kernel I took off locks, backed upand the flashed kernel. Not sure what's going on
joshk89 said:
Getting error, finger print hardware not available. Also there are 4 fingerprints saved and I can't delete them. Running smooth other than that
Edit,
Not sure what happened but I can't edit fingerprints anymore, I've even re flashed my old backup and kernel and tried re flashing the rom,
Before I flashed this kernel I took off locks, backed upand the flashed kernel. Not sure what's going on
Click to expand...
Click to collapse
My fingerprint works perfectly, not a kernel issue
GtrCraft said:
My fingerprint works perfectly, not a kernel issue
Click to expand...
Click to collapse
Yeah I don't know what happened but nothing could undo the issue other than a clean install. Which sucks lol cause I have to redo everything and my backup is useless
joshk89 said:
Getting error, finger print hardware not available. Also there are 4 fingerprints saved and I can't delete them. Running smooth other than that
Edit,
Not sure what happened but I can't edit fingerprints anymore, I've even re flashed my old backup and kernel and tried re flashing the rom,
Before I flashed this kernel I took off locks, backed upand the flashed kernel. Not sure what's going on
Click to expand...
Click to collapse
I'm sorry for this.
But it's not a kernel issue.
No one have this issue. Good luck to restore your data
I've been running 1.7 / 1.8 for a few days now using Lionfish governor and i have to say it's pretty awesome. :good:
New build is up!
Check changelog.
Martichou said:
New build is up!
Check changelog.
Click to expand...
Click to collapse
Hey bro there's some interesting features on this kernel. Figured I'd share the link with you https://forum.xda-developers.com/oneplus-5/development/render-kernel-oos-n-eas-r1-t3639839
the download link for this kernel is down. can someone provide a mirror, please?
I don't see any extra cpu governors.
What should i do??
Akshatk said:
I don't see any extra cpu governors.
What should i do??
Click to expand...
Click to collapse
Use the v44 at this thrend:
https://forum.xda-developers.com/showthread.php?p=74525704
matze779 said:
Use the v44 at this thrend:
https://forum.xda-developers.com/showthread.php?p=74525704
Click to expand...
Click to collapse
Not there.
Here is a mirrorlink:
https://www.dropbox.com/sh/xr3qe15mjqee6ps/AACOfo2SLn30rYllGC8krvx-a?dl=0
Closed per OP request
ALIZE KERNEL FOR STOCK/NOUGAT
/*
* Your warranty is... Still valid??.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Here is the thread for the Oreo variant ALIZE KERNEL FOR OREO :good:
Introduction:
The main objective of the kernel is to give to any user, a stock kernel with some tweaks like new CPU govenor focused on battery, performance and both of them, I/O scheduler, ...
Click to expand...
Click to collapse
Features:
Updated to lastest Motorola source
Kernel upstreamed to lastest source (3.18.89) compiled with Linaro-7.2
Boeffla Wl Blocker
Maple I/O sched
Frandom for random number
Wakeup boosted (time in milliseconds instead of seconds)
CRC check disabled (Performance boosted)
Vibration control
Sound control
Kcal support
Backlight dimmer
Fsync support
Safetynet patch
Makefile: -0fast, -O3 and Graphite optimizations
LZ4 compression (instead of XZ)*
Faster boot (higher read_ahead size for bootup)
All feature of the boulzordev's kernel
Many other tweaks (check github)
Some of these features is not yet added in the Stock variant.
Click to expand...
Click to collapse
Download (Nougat LOS-AOSP based)
**Nougat(V42 - WITH NEW GESTURES ONLY)**
Download: https://sourceforge.net/projects/alize/files/Nougat/AlizeR-7.x_v42.zip/download
Changelog: https://github.com/Martichou/alize_potter/commits/a7x
Click to expand...
Click to collapse
**Stock(V110)**
Download: https://sourceforge.net/projects/alize/files/Stock/Alize-stock_v110.zip/download
Be careful, stock variant will ONLY work on very LASTEST version of the ROM.
See below
Some known version which work:
- Retus: 137-83
- Retin: 137-67-5
- Retmx: 137-78-4
- Stock deodexed
But these are not exhaustive!
This one don't work:
- Retus: 137-43-5
Click to expand...
Click to collapse
How to flash:
1. Download Alize for Potter
2. Reboot to recovery
3. Flash kernel's zip
4. Reboot and tweak with proper app (Kernel auditor, Ex kernel manager, ...)
Click to expand...
Click to collapse
*Learn more about LZ4
- https://events.linuxfoundation.org/sites/events/files/lcjpcojp13_klee.pdf
- http://catchchallenger.first-world.info/wiki/Quick_Benchmark:_Gzip_vs_Bzip2_vs_LZMA_vs_XZ_vs_LZ4_vs_LZO
TELEGRAM GROUP:
https://t.me/joinchat/EWMwLkNn0rIRNNctA75U3A
Credits:
Lineage Team
Acuicultor
Vache (for source and Oreo, and so many things)
fAiyaZ (for upstreamed the kernel from .32 to .61 and more things)
And many other.. (PM if you want me to add you.)
XDA:DevDB Information
ALIZE, Kernel for the Moto G5 Plus
Contributors
Martichou
Source Code: https://github.com/Martichou/alize_potter/
Kernel Special Features:
Version Information
Status: Stable
Created 2017-11-06
Last Updated 2017-12-24
As there aren't any official Oreo roms for this model I assume your kernel works with Lineage 15
Good work bro
Muchoaliento said:
As there aren't any official Oreo roms for this model I assume your kernel works with Lineage 15
Click to expand...
Click to collapse
There is lots of Oreo rom available.
Between this thread is only for Nougat or Stock rom.
And yes, my Oreo variant work on LOS15.
Good kernel bro .Keep it up
Witch one is needed for Validus rom latest version?
cdfreak said:
Witch one is needed for Validus rom latest version?
Click to expand...
Click to collapse
If it's Oreo, then there is the other thread.
If it's nougat, take the nougat version.. you're not on stock so it's not difficult to know.
I switched from Androidfilehost to Sourceforge as some users faced lots of bugs with AFH.
New build is up! (ALIZE KERNEL - Potter)
*General changes:*
- Upstreamed to .81
- Switch for GENTLE_FAIR_SLEEPERS
- Check github for more
**Nougat (V44 without new gestures)**
https://sourceforge.net/projects/alize/files/Nougat/Alize-7.x_v44.zip/download
**Nougat (V44 with new gestures)**
https://sourceforge.net/projects/alize/files/Nougat/Alize-7.x_v44_gestures.zip/download
Are u going to keep updating?
fr3d0x said:
Are u going to keep updating?
Click to expand...
Click to collapse
join the telegram group - He is working all the time
how to recompile this kernel after upstream... i had successfully upstream the kernel source with latest patches and few fixes...
now i need to compile it for moto g5 plus..
please help me and give full proceedure to perform this operation. Thankyou
I just started using latest aokp. How would I know if it has "new Gestures"?
Sent from my XT1687 using Tapatalk
buggerritt said:
I just started using latest aokp. How would I know if it has "new Gestures"?
Sent from my XT1687 using Tapatalk
Click to expand...
Click to collapse
It has
New build is up !
Rebased
V42
https://sourceforge.net/projects/alize/files/Nougat/AlizeR-7.x_v42.zip/download
OP requested thread to be closed.
MiPa KernelDisclaimer:
Code:
/*
* Your warranty is void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this kernel
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Features:
Toolchain Google's TC v4.9
Linux 3.10.108
SELinux Permissive
CPU UC 200/400Mhz (A53/A57)
GPU UC/OC 160-772Mhz
CPU and GPU Voltage Controls
Memory Bus Voltage Controls
Thermal Control
Init.d Support
Add many CPU Governors and IO Schedulers
Add support AOD
Fake flag knox 0x0
Led Controls (FadeLed)
Synapse support
Many optimizations for battery life and performance
Boeffla Wakelock Block
Wakelock Block
State Notifier
Tweaks Ramdisk
Settings: Synapse and MTweaks
Installation instructions:
Use TWRP
Flash Kernel
Then flash root (Magisk/SuperSU)
Reboot
Download:
v.0.5:
925F/FD/I/S/K/L: https://yadi.sk/d/LtmYNcqR3Yg3Wp
920F/FD/I/S/K/L: https://yadi.sk/d/R8viMTMC3Ytp7r
v.0.4:
925F/FD/I/S/K/L: https://www.androidfilehost.com/?fid=890278863836288930
920F/FD/I/S/K/L: https://www.androidfilehost.com/?fid=890278863836288929
If you like my work, you can buy me coffee
paypal.me/palaych
Telegram link:
https://t.me/joinchat/DNw0ZEN1NZEhWoXraa1XqQ
Credits:
@Tamerlan2009
@Noxxxious
Those whose commits i used
XDA:DevDB Information
MiPa Kernel, Kernel for the Samsung Galaxy S6
Contributors
palaych
Source Code: https://github.com/palaych/mipa_kernel
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: 0.5
Stable Release Date: 2018-07-18
Created 2018-05-31
Last Updated 2018-07-18
Changelog:
v.0.5:
Add driver WireGuard
Add driver Frandom
Some optimize commits
Optimize Makefile
Some edite ramdisk
Some tweaks sched/fair/hmp
Different edits
Small edits in cpufreq/interactive
Click to expand...
Click to collapse
Reserved
will this kernel works on galaxy S6 Nougat stock rom?
iamkani said:
will this kernel works on galaxy S6 Nougat stock rom?
Click to expand...
Click to collapse
Yes
Great kernel
Release the last 0.5 version. Support discontinued.
Add driver WireGuard
Add driver Frandom
Some optimize commits
Optimize Makefile
Some edite ramdisk
Some tweaks sched/fair/hmp
Different edits
Small edits in cpufreq/interactive
Click to expand...
Click to collapse
Download:
925F/FD/I/S/K/L: https://yadi.sk/d/LtmYNcqR3Yg3Wp
920F/FD/I/S/K/L: https://yadi.sk/d/R8viMTMC3Ytp7r
Can I update the kernel on your rom? Thanks
Running MIPA rom for the 1st time.
Runs really smooth.
Battery is excellent.
Using as my daily driver.
Love it.
Also using latest v.05 MIPA kernel as well.
Thanks Dev for all the hard work))
I have been using this Kernel on my stock Nouget rom for 2 days. So far so good, everything is very smooth.
Thanks buddy, you have saved my S6 Edge
Sound included in your Kernel for our Wm1840??
Your kernel is not showing up or working on Nemesis Rom V3.1 synapse is saying no "UCI Support"
Does it have cifs support?
Your kernel is great but I think he has latency problem when I play games I hear crackling audio and lag stutring stuff
Installed this a little while ago on my S6 edge, performance and battery life were good, great work.
Good Job
I love this kernel, i hope you always make this kernel more better ...
Thanks for your effort @palaych
Can this be installed on custom rom. I currently have LOS 16.
How to activate Always on display??