Related
Hi all,
I have a question about the GPad G10 firmware files.
I have unpack the rom of the G10, and i have now 3 files, boot.img, recover.img en system.img.
I can unpack the boot.img and the recover.img with split_bootimg, but when i try to unpack the system.img with unyaffs it fails.
I think its because the system.img is an ext3 format?
Can anyone tell me how i can extract this system.img with another way.
You can find the system.img here: tinyurl.com/6kqvoot
Jelmer.
Sorry for my bad english, i am dutch.
In CentOS when i type:
Code:
file system.img
it says:
Code:
system.img: VMS Alpha executable
Can someone tell me how i can extract that sort of files?
Jelmer.
Sorry for bad english, i'm Dutch.
Samsung Galaxy S6 G920FXXU1AOBN System Dump Files
Let's begin porting for our Note 4!
This is a system partition dump of Samsung galaxy S6 SM-G920F “G920FXXU1AOBN” build number (applications, fonts, framework, permissions, media, lib, and lib64 folders), build.prop and G920F partition table.
Contents:-
1. system folder: contains the whole system files and folders.
2. app folder: contains *.apk system applications files.
3. priv-app folder: contains *.apk system applications files.
4. media folder: contains all *.qmg and *.ogg audio (notifications, ringtones, ui) files.
5. fonts folder: contains all *.ttf system font files.
6. framework folder: contains framework-res.apk all *.jar files.
7. permissions folder: contains all *.xml files.
8. lib, lib64 folders: contains all *.so files
9. build.prop file.
Source And Password of the zip:- ZiDroid.com
Let's Begin-AP
Will this work on note 4 kitkat?
Sent from my SM-N910U using Tapatalk
daproject said:
Will this work on note 4 kitkat?
Sent from my SM-N910U using Tapatalk
Click to expand...
Click to collapse
No Mate
would someone be able to share the following files:
1) framework.res from system/framework folder
2) theme_app_list.xml file from System/csc if it exists
3) floating_feature.xml from system/etc/
4) SecThemeChooserxx from app or priv-app'
5) secmms and seccontacts from priv-app
Hello,
I was able to unpack the image simply by using the command
Code:
unrar x system.img
Now that I have made my modifications (literally only changing the build.prop to start) I need to repack the system file folder back to an "x-raw-disk-image". Does anybody know how I may do this? Thanks everyone!
HELP !!!
My H9 was under OREO, using the page: https://forum.xda-developers.com/honor-9/how-to/stf-l09c432-how-to-install-oreo-h9-t3707729
The device is unlocked
Because of SNAPCHAT root detection, i removed completly SuperSU from my phone... very bad idea.... as my phone doesn't start anymore
The blank/green droid page display the following message:
ERROR MODE
Attention please update system again
Error!
Func NO: 10 (boot image)
Error NO: 2 (load failed)
----------------------------------
I can enter fastboot and nothing else !!!
Any suggestions ???
Thanks
Olivier
You must repack from your UPDATE.APP these files:
Recovery.img
Kernel.img
Ramdisk.img
And flash these files via fastboot.
Wysłane z mojego STF-L09 przy użyciu Tapatalka
As i upgraded using OldDroid's steps, i don't have these files. I just have the following ones:
RAMDISK.img
RECOVERY_RAMDISK.img
SR5-2.82-supersu_ramdisk.zip
STF_RECOVERY_NoCheck.img
STF_RECOVERY_OREO_NoCheck.img
twrp-3.1.1-nougat-stf.img
twrp-3.1.1-oreo-stf.img
update_rollback_al10c00b190.zip
and
L09-B321/update_data_full_public.zip
L09-B321/update_full_STF-L09_hw_normal.zip
L09-B321/update.zip
And, as partitions are different in Oreo, i m not sure i can flash the previous files (from L09-B321)...
(my phone is from EU)
Unzip UPDATE.APP contained inside L09-B321/update.zip .
Then open the previously extracted UPDATE.APP with this app:
https://forum.xda-developers.com/showthread.php?t=2433454
Then follow previous post from @kac222
Thanks :good: for all the details... one last (i hope) question regarding extracted files: could you please let me know which *exact* filename i should flash for recovery, kernel and ramdisk among this file list ?
(reminder: my H9 was running Oreo )
Code:
CACHE img
CRC img
CURVER img
DTS img
ERECOVERY_KERNE img
ERECOVERY_RAMDI img
ERECOVERY_VBMET img
ERECOVERY_VENDO img
FASTBOOT img
FW_HIFI img
FW_LPM3 img
HISEE_FS img
HISEE_IMG img
HISIUFS_GPT img
ISP_FIRMWARE img
KERNEL img
MODEM_FW img
MODEMNVM_UPDATE img
ODM img
PACKAGE_TYPE img
PRODUCT img
RAMDISK img
RECOVERY_RAMDIS img
RECOVERY_VBMETA img
RECOVERY_VENDOR img
SENSORHUB img
SHA256RSA img
SYSTEM img
TEEOS img
TRUSTFIRMWARE img
VBMETA img
VECTOR img
VENDOR img
VERLIST img
XLOADER img
fastboot flash recovery_ramdisk RECOVERY_RAMDIS.img
fastboot flash ramdisk RAMDISK.img
fastboot flash kernel KERNEL.img
fastboot reboot
Wysłane z mojego STF-L09 przy użyciu Tapatalka
Guys,
I would like to sincerely THANK YOU for your help and being so responsive !!!
(as you probably guessed: it works ! )
Hi, while trying to create a custom vbmeta.img file with avbtool with the instructions at https://www.hovatek.com/forum/thread-32664.html I noticed that most of the parts that should be in my vbmeta.img section are missing. What should I do?
The vbmeta.img file and its information are in the attachments.