Just flash the zip in TWRP to change your boot logo. These should work for any model of the G6 Play. All backgrounds are white with the exception of the original boot logo. This was done to cover up that annoying bad key or N/A message. Enjoy!
Hey, thanks for this! If I do a design, could you make it into one of these? For example, this one?
the-her0 said:
Hey, thanks for this! If I do a design, could you make it into one of these? For example, this one?
Click to expand...
Click to collapse
Yep, check back in like 10-15min and I'll make that a logo.
Edit: Done!
Motorola Moon
This took me a few hours. Hope you folks like it. I'll probably make a few more over the next several days.
Is there a tutorial anywhere on how make these?
These are great and just what I need, however, I can't seem to the zip files when I'm booted into TWRP on my XT1922-3 (I think it has something to do with not being able to find a download for XT1922-3_no_dm-verity_boot.img that still exists anywhere). So is there a way to flash this using fastboot?
I tried unzipping and using the command > 'fastboot flash logo logo.bin' which it said was successful, but I still see the bad key or N/A.
It would be great if anyone can explain how to get this to work for me.
Motorocker said:
These are great and just what I need, however, I can't seem to the zip files when I'm booted into TWRP on my XT1922-3 (I think it has something to do with not being able to find a download for XT1922-3_no_dm-verity_boot.img that still exists anywhere). So is there a way to flash this using fastboot?
I tried unzipping and using the command > 'fastboot flash logo logo.bin' which it said was successful, but I still see the bad key or N/A.
It would be great if anyone can explain how to get this to work for me.
Click to expand...
Click to collapse
You shouldn't need a no verity boot.img
You can flash the dmverity disabler then magisk.
If you already have TWRP, then dmverity has already been disabled. Or your phone wouldn't boot.
But if you need it
https://forum.xda-developers.com/an...-dm-verity-forceencrypt-t3817389/post77091359
madbat99 said:
You shouldn't need a no verity boot.img
You can flash the dmverity disabler then magisk.
If you already have TWRP, then dmverity has already been disabled. Or your phone wouldn't boot.
But if you need it
https://forum.xda-developers.com/an...-dm-verity-forceencrypt-t3817389/post77091359
Click to expand...
Click to collapse
Thanks, yes, I downloaded that already and put the zip file into the root directory, but TWRP doesn't see it to be able to install/flash it.
As I don't need the phone rooted, as I'm just setting it up to sell on, I think I'll just reflash the stock firmware and see if I can relock the bootloader and get rid of the N/A and/or Bad Key messages, so it is like oem from the factory, for whoever buys it.
Motorocker said:
Thanks, yes, I downloaded that already and put the zip file into the root directory, but TWRP doesn't see it to be able to install/flash it.
As I don't need the phone rooted, as I'm just setting it up to sell on, I think I'll just reflash the stock firmware and see if I can relock the bootloader and get rid of the N/A and/or Bad Key messages, so it is like oem from the factory, for whoever buys it.
Click to expand...
Click to collapse
That's because TWRP can't read encrypted storage. Has to on your SD card.
These are really cool! Appreciate you sharing what you made and getting the annoying "bad key" done away with. Did you follow a specific tutorial to make these or you just already knew how? I am interested. I would like to make some is why I ask. I use Ubuntu on my home computer and I have gimp. I haven't ever really messed with it much but I plan on setting down with it soon ,hopefully this weekend and this would be a cool project I believe to start out. I'll search around here on xda and see what all I can find on boot logos. Thank you! Also thank very much for the custom twrp recovery!! If it wasn't for you I don't believe the Moto g6 play would be able to install GSI roms. :good:
flash713 said:
These are really cool! Appreciate you sharing what you made and getting the annoying "bad key" done away with. Did you follow a specific tutorial to make these or you just already knew how? I am interested. I would like to make some is why I ask. I use Ubuntu on my home computer and I have gimp. I haven't ever really messed with it much but I plan on setting down with it soon ,hopefully this weekend and this would be a cool project I believe to start out. I'll search around here on xda and see what all I can find on boot logos. Thank you! Also thank very much for the custom twrp recovery!! If it wasn't for you I don't believe the Moto g6 play would be able to install GSI roms. :good:
Click to expand...
Click to collapse
https://forum.xda-developers.com/mo...-boot-logo-maker-source-t2848667/post54841085
Can someone make boot.logo in HavocOs style?
Who can make logo.bin for havoc-os? I’m attaching a picture, and below it should be moto g6 play
Related
Hard brick for OPT happens when you change critical partitions. It will follow improper firmware flash or accidental erase of certain partitions. The phone won't show any response when hardbricked.
The solution for OPT is similar to OPO - you just need a Qualcomm driver and a recover package. The only full recovery package available is very big and it restore the phone to Hyrdogen OS, with everything wiped. So it would not be very attractive.
Fortunately, thanks to this post from Chinese supporting forum, a minimal version of restore package is provided. It does not wipe user data and guarantee a recovery entry. you would normally be freed using this package. if not, please use the full package in the end of the post
Download link for driver
Download link for Recovery tool
uncompress the files to a local folder.
First step, turn off drive signature enforcement in windows 8/8.1/10. Tutorial Here
Second step, hold the power key for 20 seconds to force turn off power. connect OPT to usb, hold volume+ and power until your PC finds a new hardware (if it doesn't work, try hold volume+ and volume- together)
Third step, go to device manager in your PC, find the new "QUALCOMM-HS USB Diagnostics 9006" device. Update its driver in property page using the Qualcomm driver provided (for 32bit windows, select x86 folder; for 64bit windows, select x64 folder).
Fourth step, when the driver is installed properly, run MSM8994DownloadTool.exe in the recover tools folder, using admin privileges . Clear start in top left corner and wait for it to finish.
Now your OPT should be able to enter TWRP recovery. It still won't boot but you can manually flash anything again (like the full Oxygen OS package).
The procedure is tested by me twice. Enjoy!
p.s: sorry the recovery image in the A2001_save_brick_mini.rar is Chinese. Please download this file, change the name to recovery.img and substitute the file in the recovery tool before flashing.
UPDATE：full Oxygen OS 150805 restoration package for those who experience recovery entry problem. Note that this package wipes everything including internal storage!
Awesome, I will go ahead and make a full recovery tool that includes these files as well as the latest version of OxygenOS as I did with the Oneplus one.
You write about a full Oxygen Package? What do you mean with it? a flashable .zip or fastboot .img?
CoreGaming said:
You write about a full Oxygen Package? What do you mean with it? a flashable .zip or fastboot .img?
Click to expand...
Click to collapse
Like i did before with my mod of the toolkit
https://forums.oneplus.net/threads/...ol-restore-stock-cm11s-fix-bricks-etc.237827/
okay and were can i get this package for the OPT?
CoreGaming said:
okay and were can i get this package for the OPT?
Click to expand...
Click to collapse
Havn't made it yet, still need to work on it. It is a little different than OPO so it might take some time.
okay this will be great. Take your time i'm ready
Hi,
anyone knows how I can force the OnePlus Two to enter QUALCOMM-HS mode?
I have a "semi-bricked" OP2.
It can boot, but the recovery is broken and I cannot enter it anymore. Worse enough, the bootloader is locked and I cannot unlock it anymore.
So I am kinda stuck and thought this manual would bring me back recovery. But - I cannot get it to enter this specific emergency recovery mode as boot loaders are intact.
Any idea?
Thanks
Andi
Lord Boeffla said:
Hi,
anyone knows how I can force the OnePlus Two to enter QUALCOMM-HS mode?
I have a "semi-bricked" OP2.
It can boot, but the recovery is broken and I cannot enter it anymore. Worse enough, the bootloader is locked and I cannot unlock it anymore.
So I am kinda stuck and thought this manual would bring me back recovery. But - I cannot get it to enter this specific emergency recovery mode as boot loaders are intact.
Any idea?
Thanks
Andi
Click to expand...
Click to collapse
Hmm, I may be able to help. Do you got a hangouts we can talk on so it could be easier? If so PM me your email so I can add you.
Zyxxeil said:
Hmm, I may be able to help. Do you got a hangouts we can talk on so it could be easier? If so PM me your email so I can add you.
Click to expand...
Click to collapse
Hi,
ok, I am one step further now.
I could bring the device in that mode, flashed via this recovery tool. All partitions were flashed but still no recovery. How can that be? ooops.
I did that many time on my OPO already successfully. But of course with the full recovery package.
So question is, I would not mind starting from scratch... anybody knows where the "big" recovery package that erases everything is available?
Thanks
Andi
Lord Boeffla said:
Hi,
ok, I am one step further now.
I could bring the device in that mode, flashed via this recovery tool. All partitions were flashed but still no recovery. How can that be? ooops.
I did that many time on my OPO already successfully. But of course with the full recovery package.
So question is, I would not mind starting from scratch... anybody knows where the "big" recovery package that erases everything is available?
Click to expand...
Click to collapse
I'm in a similar situation to you. I lost my recovery and somehow my boot loader is locked again. I can't set OEM unlock as I am on the old version of OxygenOS.
I tried the above instructions but they don't work. The phone reboots as normal, not in to recovery. If you solve this then let me know.
EDIT: I think flashing hydrogenos using this method is the best idea. We can then select the OEM unlock from developer settings, use fastboot to unlock the bootloader and flash a new recovery. The question is how? @qwsdert4
khr0n0s said:
I'm in a similar situation to you. I lost my recovery and somehow my boot loader is locked again. I can't set OEM unlock as I am on the old version of OxygenOS.
I tried the above instructions but they don't work. The phone reboots as normal, not in to recovery. If you solve this then let me know.
EDIT: I think flashing hydrogenos using this method is the best idea. We can then select the OEM unlock from developer settings, use fastboot to unlock the bootloader and flash a new recovery. The question is how? @qwsdert4
Click to expand...
Click to collapse
I am on Oxygen 2.0.1 and still do not have the option. Something is really odd...
Andi
Lord Boeffla said:
Hi,
ok, I am one step further now.
I could bring the device in that mode, flashed via this recovery tool. All partitions were flashed but still no recovery. How can that be? ooops.
I did that many time on my OPO already successfully. But of course with the full recovery package.
So question is, I would not mind starting from scratch... anybody knows where the "big" recovery package that erases everything is available?
Thanks
Andi
Click to expand...
Click to collapse
Hi, I got the "big recovery package" in question from OP support centre in China. It will recover your OPT to factory Hydrogen OS from which you could start over. I'll upload it onto Mega very soon so stay tuned.
Lord Boeffla said:
I am on Oxygen 2.0.1 and still do not have the option. Something is really odd...
Click to expand...
Click to collapse
HydrogenOS definitely has the option because it is how I flashed TWRP in the first place
khr0n0s said:
I'm in a similar situation to you. I lost my recovery and somehow my boot loader is locked again. I can't set OEM unlock as I am on the old version of OxygenOS.
I tried the above instructions but they don't work. The phone reboots as normal, not in to recovery. If you solve this then let me know.
EDIT: I think flashing hydrogenos using this method is the best idea. We can then select the OEM unlock from developer settings, use fastboot to unlock the bootloader and flash a new recovery. The question is how? @qwsdert4
Click to expand...
Click to collapse
Without recovery how do you flash hydrogenOS?
---------- Post added at 06:55 PM ---------- Previous post was at 06:54 PM ----------
qwsdert4 said:
Hi, I got the "big recovery package" in question from OP support centre in China. It will recover your OPT to factory Hydrogen OS from which you could start over. I'll upload it onto Mega very soon so stay tuned.
Click to expand...
Click to collapse
Wow thanks, I was trying to do it with the one you posted but I couldn't since it was missing the info for system sectors. Now i can make my tool
Zyxxeil said:
Without recovery how do you flash hydrogenOS?
Click to expand...
Click to collapse
Using this tool and the full recovery package? Or am I missing something here?
khr0n0s said:
Using this tool and the full recovery package? Or am I missing something here?
Click to expand...
Click to collapse
The tool posted does not contain a system, but he is going to post the full one soon.
Zyxxeil said:
The tool posted does not contain a system, but he is going to post the full one soon.
Click to expand...
Click to collapse
Precisely, that is exactly what I meant. Fingers crossed that will solve this.
It could be I successfully recoverd following a hint by user @Zyxxeil (many thanks for the help).
If all works I will post soon what I did.
But - have everything running now again. Next I try to flash twrp again and root. If that worked, I will post the steps.
Andi
qwsdert4 said:
Hi, I got the "big recovery package" in question from OP support centre in China. It will recover your OPT to factory Hydrogen OS from which you could start over. I'll upload it onto Mega very soon so stay tuned.
Click to expand...
Click to collapse
Very nice. Wait for it...
Is a Version with Oxygen OS also aviable?
Quick fast post. Fix it up later.
Unofficial TWRP for the SM-G360T1
Step 1:
You should know how to flash twrp by now.
Step 2:
Profit
Download link:
https://www.androidfilehost.com/?fid=24052804347820600
Known issues:
Usb otg not working. Will fix later.
Enjoy. Hit thanks or donate and all that good crap [emoji14]
Mine
THANK YOU ONCE AGAIN @ShinySide!!! Not only for root, but now for a working custom recovery. Truly the 2 most important tools we could have for our phone.
FOR EVERYONE ELSE:
As usual, be sure to give @ShinySide your Thanks/Donations/etc.!!! He deserves it! Also, now that you have TWRP you might be wondering what to do next. Here are a couple of suggestions of things that I've already done and that I am quite happy with.
1) Theme it! - Here are some themes you can try out that will not only make TWRP more beautiful, but also provide a layout that is more intuitive and user friendly. These are listed in a Galaxy S2 thread yes, but I've attached a picture of the one that I'm currently running and I'm happy to say that it works on our phone like a charm. I've also used these themes on other phones in the past. Just follow the instructions in the OP of that thread and give the guy some thanks on that thread if you like them. There is no risk in this btw. Either it works or it doesn't and to get rid of it if you don't like it you just have to delete the theme folder that you placed in TWRP. (Try to use the files that say "480x800" as that's the resolution of our screen.) Here is the link: http://forum.xda-developers.com/galaxy-s2-plus/themes-apps/theme-materialised-t2933979
2) Add the Xposed Framework - Go to this link here: http://forum.xda-developers.com/showthread.php?p=62377731
Then, install the Xposed app from the link on that thread. After that, you're going to want to pick the file attached to the OP of that thread that is called "xposed-v80.0-sdk22-arm-custom-build-by-wanam-20160211.zip" and save it to the root of your external SD card. (Do not download the one that says "ARM64" in it. Just the one I mentioned.) Then, just flash it via TWRP and reboot. You should now have the Xposed Framework installed. Once, again be sure to give the OP thanks on that thread too!
NOTE: After flashing Xposed it may hang on the MetroPCS screen on the next reboot for up to 15-20 mins or so while it's doing stuff. If it's any longer than that, then just pop the battery out and reboot. It will boot properly after that while it reoptimizes some apps.
OK something not right everytime I flash the twrp I keep getting the 2.8.70 instead of the version of This 2.8.1.0 one I need help cause everything is correct I keep getting that old version instead of this new version but twrp 2.8.7.0 still works good but I want the version right here
Deandre7452 said:
OK something not right everytime I flash the twrp I keep getting the 2.8.70 instead of the version of This 2.8.1.0 one I need help cause everything is correct I keep getting that old version instead of this new version but twrp 2.8.7.0 still works good but I want the version right here
Click to expand...
Click to collapse
2.8.7.0 is right. The picture I attached of my themed one I just downloaded from the theme thread because I couldn't take a screenshot from TWRP. Everything is good. No need to worry.
Thanks....glad to know that but everytime I reboot to system from twrp it keep going right back to the twrp instead of system that's what I worry about I have to keep flashing the kernel root cause the twrp not working right but ima get the theme to see what happens next
Deandre7452 said:
Thanks....glad to know that but everytime I reboot to system from twrp it keep going right back to the twrp instead of system that's what I worry about I have to keep flashing the kernel root cause the twrp not working right but ima get the theme to see what happens next
Click to expand...
Click to collapse
It shouldn't be doing that. Also, you should just make sure your TWRP is properly installed first before you do anything else to it. Maybe try rebooting your phone just by holding the power button once instead of selecting reboot system and see if it boots correctly then.
Sent from my SM-G360T1 using Tapatalk
I don't think it's right now I have the same picture frame u have in the picture but still not 2.8.1.0 at the top it have the 2.8.7.0 up there at the top of it and another thing is I can't flash anything everything else good but can't swipe to install so I need to get this right cause I don't be having problems with nothing else when I do stuff for my device
Deandre7452 said:
I don't think it's right now I have the same picture frame u have in the picture but still not 2.8.1.0 at the top it have the 2.8.7.0 up there at the top of it and another thing is I can't flash anything everything else good but can't swipe to install so I need to get this right cause I don't be having problems with nothing else when I do stuff for my device
Click to expand...
Click to collapse
Again, it is supposed to be 2.8.7.0 . Don't go by the picture I posted it was just a sample of what I had. Not a screenshot. Also, it doesn't need to look like mine to work. Theming it was just for fun and should only be done after you've successfully installed TWRP. Anyhow, try flashing this stock recovery file here. Then, boot into stock recovery and make sure you can still reboot to Android from there. If so, then go back and try flashing the TWRP recovery file again instead and see if that fixes the problem. No one else should flash this file by the way unless they are trying to go back to stock recovery for whatever reason. Thanks!
Sent from my SM-G360T1 using Tapatalk
Good job
Awesome! Goood job dude, can't wait till you write up the proper instructions. I'm a noob so don't want to do something wrong.
Another masterpiece By @shineside....
A great BIG Thank you @Bogarty For helping to bring this all together.
We have root, we have TWRP, and that's all thanks to @ShinySide! Great work!
Ok yall I just did a splash screen if anyone don't know but everyone have the color theme already go to the page here http://forum.xda-developers.com/android/themes/theme-twrp-materialised-dark-light-play-t2915584 scroll down to the change the recovery splash screen download the AIK file First when it finish flash it before anything download the splash set zip when it finish unzip that file then u download the trap kernel root are if u already have it on the device use any root explore renamed the tar.md5 to .img now go to recovery flash that AIK before you start anything hit where u change your theme color but click on change splash then u put the trap kernel.img on the first slot then the second slot click inside the splash set folder choose what color u want then flash it then there u go a new splash screen set......this for anyone that don't know
bogarty said:
It shouldn't be doing that. Also, you should just make sure your TWRP is properly installed first before you do anything else to it. Maybe try rebooting your phone just by holding the power button once instead of selecting reboot system and see if it boots correctly then.
Sent from my SM-G360T1 using Tapatalk
Click to expand...
Click to collapse
So, should this NOT work and it continues to reboot to TWRP what comes next? ? Ok, you got me. It continues to reboot into TWRP. I've never encountered this scenario before (granted I've never flashed a custom recovery via ODIN before either, but it went as expected up until I did a backup and tried to reboot into the system) and no, I didn't bother with trying to fancy up TWRP. I don't want TWRP looking unfamiliar. Any help would be greatly appreciated.
i am oblivion said:
So, should this NOT work and it continues to reboot to TWRP what comes next? Ok, you got me. It continues to reboot into TWRP. I've never encountered this scenario before (granted I've never flashed a custom recovery via ODIN before either, but it went as expected up until I did a backup and tried to reboot into the system) and no, I didn't bother with trying to fancy up TWRP. I don't want TWRP looking unfamiliar. Any help would be greatly appreciated.
Click to expand...
Click to collapse
Try flashing through ODIN again. Make sure you are in actual download mode (meaning don't use the option in TWRP, use the key combo), and flash it again.
Maybe we could get another youtube video? What do you say, "TheDerek"?
xRaZeR_FuZioNx said:
Try flashing through ODIN again. Make sure you are in actual download mode (meaning don't use the option in TWRP, use the key combo), and flash it again.
Click to expand...
Click to collapse
Ok, that's next on the agenda. Gonna take a walk and get myself calmed down before I resume troubleshooting. Thanks for the helpful and speedy response. And the bit about booting into Download Mode using the button combo over the TWRP option - I actually had no idea there was a difference there. I've gathered several boot/recovery zips and tars just in case and am tracking down the T-Mobile version of the g360t1 firmware as well (to cover all my bases, because when it rains it pours ?). Anyhow, I'll report back once I have something to report and thanks again guys ?
i am oblivion said:
Ok, that's next on the agenda. Gonna take a walk and get myself calmed down before I resume troubleshooting. Thanks for the helpful and speedy response. And the bit about booting into Download Mode using the button combo over the TWRP option - I actually had no idea there was a difference there. I've gathered several boot/recovery zips and tars just in case and am tracking down the T-Mobile version of the g360t1 firmware as well (to cover all my bases, because when it rains it pours ?). Anyhow, I'll report back once I have something to report and thanks again guys ?
Click to expand...
Click to collapse
i am oblivion said:
So, should this NOT work and it continues to reboot to TWRP what comes next? ? Ok, you got me. It continues to reboot into TWRP. I've never encountered this scenario before (granted I've never flashed a custom recovery via ODIN before either, but it went as expected up until I did a backup and tried to reboot into the system) and no, I didn't bother with trying to fancy up TWRP. I don't want TWRP looking unfamiliar. Any help would be greatly appreciated.
Click to expand...
Click to collapse
It has to be something you guys are doing during the flashing process that is causing it to boot into TWRP instead of Android. I would try flashing the Trapkernel again from download mode to see if that gives you boot, then if so, try flashing TWRP again. Both should be flashed in AP slot of ODIN. Make sure OEM Unlocking is checked in developer options, etc.
If that doesn't work and it still boots to TWRP, then you may have messed something up in there somehow. Try flashing back stock boot and stock recovery and make sure boot and stock recovery were restored. Once that's working, then you can try reflashing Trapkernel and TWRP. Use this link for more info on restoring your phone and for links to the stock files if you need them.
http://forum.xda-developers.com/showthread.php?p=62906680
Sent from my SM-G360T1 using Tapatalk
Theres a problem, I cant moutn system in Twrp and because of that i cant update SU binary and some apps dont work :/
cmurder61 said:
Theres a problem, I cant moutn system in Twrp and because of that i cant update SU binary and some apps dont work :/
Click to expand...
Click to collapse
Try reinjecting TWRP using the option in settings.
I would like to know how to upgrade to a new ROM (Lollipop or better) on my Verizon HTC One Max with the option to return to stock. Software Information: 4.4.2, Sense 6.0, 3.09.605.3, 6.20, 4.60_002, 15432, 5
I was told to use (and did) Sunshine and then downloaded SuperSU from Google Store (per very detailed instructions and was told to not choose TWRP when the question popped up to choose one or the other (common/normal?)).
My phone is now UNLOCK and S-OFF as well as Rooted (but I'm having a lot of problems with blank screens, etc. and even had the black screen with the red ! in a red triangle (and I don’t know how I got it to boot up again (pushed pwr buttons, vol +/-, etc.)). However, that is as far as I’ve gotten. Confused am I.
I don’t know how to flash; however, I’ve been trying to figure it out, but I’m lost.
I’ve downloaded a lot of files from other threads, but the instructions, while detailed, didn’t say HOW to flash or add TWRP where I (a NEWBORN NEWBIE/NOOBIE) could understand, etc. Is there a place where all this is together?
Am I out of luck or would someone PLEASE help me fix and upgrade it with the option to return to stock if needed? I would love to have Sense 7.0, if possible. I apologize for such a long post/thread.
THANK YOU SO VERY MUCH!!!!!
P. S. My phone is now Prepaid Verizon (was Postpaid). Don't know if that matters. I have pics of the files I downloaded from one of your great guys, but they are on my computer. Not sure how to upload. I AM GLAD THAT I FOUND YOUR SITE!!!!!
@LoveSpock I am going to make this short and simple...
First off the Verizon Max software only goes up to 4.4.2. If you want to upgrade you'll need a custom rom which is why you S-OFF and unlocked...
You will need to get familiar with fastboot commands. Google is your friend on how to use if you don't know how to. Here is the link to the TWRP image for your device. http://flyhalf205.com/recoveries/openrecovery-twrp-2.8.7.1-t6univ.img Once you get fastboot setup you will type in the command fastboot flash recovery openrecovery-twrp-2.8.7.1-t6univ.img Make sure you have everything in the same directory when executing the command.
From there you are free to wipe then flash anything you would like. Wiping will delete your data so text, contacts that are stored on local phone(not sim or google) will be deleted.
@Flyhalf205
Thank you for your response and instructions. Does this mean I don't need to do anything to the SUPERSU that is already on the phone (and what it did)?.... Following your instructions will wipe everything?
I'll definitely need to take out my sd card. I've saved a ton of stuff on it. ...and backup my contacts and text messages.
I have some more googling and try to learn what you wrote for me to learn. I'll also have to find out what ROM to use....
Your Padawan thanks you.
LoveSpock said:
@Flyhalf205
Thank you for your response and instructions. Does this mean I don't need to do anything to the SUPERSU that is already on the phone (and what it did)?.... Following your instructions will wipe everything?
I'll definitely need to take out my sd card. I've saved a ton of stuff on it. ...and backup my contacts and text messages.
I have some more googling and try to learn what you wrote for me to learn. I'll also have to find out what ROM to use....
Your Padawan thanks you.
Click to expand...
Click to collapse
Shouldn't worry about supersu. Most custom ROMs are going to have that prebuilt into it. Once you get TWRP we will go further into detail about how stuff works.
If you use twrp no need to take your SD card out just go to setting and unchecked SD card and like lovespoke said make sure to dl the right file you can dl right fastboot files here on xda just search it
Hey! Don't mean to hijack the thread but I'm in the same boat. I've never rooted and I'm looking to root my Verizon HTC one max. I'd also like to maybe install a custom Rom but I'm a noob so I'm not quite sure what I'm doing. Ok so it's my understanding that sunshine will root, s-off, AND unlock my boot loader? Btw I have no idea what those terms mean. Anyway, if someone could please confirm that about sunshine, it would really help me out. I've already downloaded and installed sunshine on my phone but I haven't paid the $25 yet.
Xx Moe, I strongly suggest you READ the various threads on XDA about unlocking bootloaders, gaining S-OFF and rooting. You can easily brick a device and there's much less support for the Max now than there was when it came out more than two years ago.
I don't believe Verizon HTC One Max's can be rooted without unlocking bootloader/gaining S-OFF and the exclusive method for that is Sunshine (unless you know someone with a Java card). Once you're bootloader unlocked and S-OFF, you can then "flash" any partition on the device and that's how to brick the device.
Once you are bootloader unlocked and S-OFF, you start by flashing a 'recovery', which is usually the latest version of TWRP for the HTC One Max. Don't flash a recovery for a different device. (Google "Team Win Recovery Project"). Once you have a custom recovery you can "wipe" your device and flash a new ROM.
Wiping deletes all data, or some data, depending upon how you wipe, and there are not very many Verizon HTC One Max ROMs out there that are fully functional. Check the threads, one sticky thread has a listing of ROMs.
Finally, I don't believe anyone has gotten Marshmallow going on a Max, so expect the "best" you'll be able to do is a Lollipop ROM or a Cyanogen Mod equivalent.
Awesome! Thanks for the super quick reply. So yes, sunshine will s-off and unlock boot loader. That seemed to be the million dollar question since (like you said) the one max doesn't have very much support anymore. I'm definitely going to keep reading the forums because I don't want to brick my phone. I've also been watching some tutorials on YouTube. Everything (so far) seems pretty straight forward now, but you can never be too careful. Thanks for your help hgoldner!
Flyhalf205 said:
@LoveSpock I am going to make this short and simple...
First off the Verizon Max software only goes up to 4.4.2. If you want to upgrade you'll need a custom rom which is why you S-OFF and unlocked...
You will need to get familiar with fastboot commands. Google is your friend on how to use if you don't know how to. Here is the link to the TWRP image for your device. http://flyhalf205.com/recoveries/openrecovery-twrp-2.8.7.1-t6univ.img Once you get fastboot setup you will type in the command fastboot flash recovery openrecovery-twrp-2.8.7.1-t6univ.img Make sure you have everything in the same directory when executing the command.
From there you are free to wipe then flash anything you would like. Wiping will delete your data so text, contacts that are stored on local phone(not sim or google) will be deleted.
Click to expand...
Click to collapse
Hey flyhalf, is there a thread on here on how to learn about adb fastboot, and flash the custom recovery for noobs? I cant seem to find it. I'm trying to install a custom rom on my htc one max but this is my first time ever rooting/unlocking an android. Ive searched the site but i cant find a tutorial on how to install the custom recovery or learn about adb yet. I have sunshine already on my phone but i havent used it yet because i want to know exactly what im doing before i pay the $25. Any help is appreciated. I already know how to get into the bootloader by pressing the power and volume down buttom at the same time while the phone is turned off.
Xx MOE said:
Hey flyhalf, is there a thread on here on how to learn about adb fastboot, and flash the custom recovery for noobs? I cant seem to find it. I'm trying to install a custom rom on my htc one max but this is my first time ever rooting/unlocking an android. Ive searched the site but i cant find a tutorial on how to install the custom recovery or learn about adb yet. I have sunshine already on my phone but i havent used it yet because i want to know exactly what im doing before i pay the $25. Any help is appreciated. I already know how to get into the bootloader by pressing the power and volume down buttom at the same time while the phone is turned off.
Click to expand...
Click to collapse
I'm heading to bed now. If I get time tomorrow I'll try to explain. If not we can setup team viewer and I can just set your computer up for you.
Sent from my Nexus 9 using Tapatalk
Flyhalf205 said:
I'm heading to bed now. If I get time tomorrow I'll try to explain. If not we can setup team viewer and I can just set your computer up for you.
Sent from my Nexus 9 using Tapatalk
Click to expand...
Click to collapse
That would be awesome, but i think i found something from google. https://twrp.me/devices/htconemaxverizon.html
I downloaded the sdk and corresponding java that the site recommended. I attached a screenshot of my pc to show where im at in that process.
Xx MOE said:
That would be awesome, but i think i found something from google. https://twrp.me/devices/htconemaxverizon.html
I downloaded the sdk and corresponding java that the site recommended. I attached a screenshot of my pc to show where im at in that process.
Click to expand...
Click to collapse
I also downloaded the android-sdk_r24.4.1-windows.zip file but i moved it out of my downloads file, so it didn't show up on my screenshot
Xx MOE said:
I also downloaded the android-sdk_r24.4.1-windows.zip file but i moved it out of my downloads file, so it didn't show up on my screenshot
Click to expand...
Click to collapse
Download the platform tools and the android usb driver. Don't need anything else.
But basically if your s-off yet. Boot into HBOOT. Power off phone and hold down both power button and the volume down button. Select fastboot using the power button. Your computer should hopefully automatically pick up drivers and call the device "My HTC" in the device manager. If not you'll need to go in and manually assign the downloaded driver using the link above to the Android device in device manager.
Download twrp image file into the same directory as the platform tools downloaded to. In windows, right click while holding down shift anywhere on the white blank area in platform tools and click on "open command window here".. From there you will type in the command fastboot flash recovery recoveryFileName.img
If it says waiting for device. Check device manager and make sure the driver is installed right.
Flyhalf205 said:
Download the platform tools and the android usb driver. Don't need anything else.
But basically if your s-off yet. Boot into HBOOT. Power off phone and hold down both power button and the volume down button. Select fastboot using the power button. Your computer should hopefully automatically pick up drivers and call the device "My HTC" in the device manager. If not you'll need to go in and manually assign the downloaded driver using the link above to the Android device in device manager.
Download twrp image file into the same directory as the platform tools downloaded to. In windows, right click while holding down shift anywhere on the white blank area in platform tools and click on "open command window here".. From there you will type in the command fastboot flash recovery recoveryFileName.img
If it says waiting for device. Check device manager and make sure the driver is installed right.
Click to expand...
Click to collapse
Ok, so if im doing this correctly, the twrp img should be in the platform tools folder and my computer should recognize my phone as "my htc" as shown in my attached screenshot...
Xx MOE said:
Ok, so if im doing this correctly, the twrp img should be in the platform tools folder and my computer should recognize my phone as "my htc" as shown in my attached screenshot...
Click to expand...
Click to collapse
Yes. That is correct so far.
Flyhalf205 said:
Yes. That is correct so far.
Click to expand...
Click to collapse
Perfect! Thank you so much! now all i have to do is use sunshine to s-off/unlock bootloader and follow this thread: http://forum.xda-developers.com/showthread.php?t=2498746 to install custom recovery and i should now be able to flash custom roms! Thanks for your help! A donation will be coming your way soon! :good::good::good::highfive:
Almost Ready....
Flyhalf205 said:
Shouldn't worry about supersu. Most custom ROMs are going to have that prebuilt into it. Once you get TWRP we will go further into detail about how stuff works.
Click to expand...
Click to collapse
I've been out of commission... Sorry about the long wait.
I'm sure you've been very busy.
I found the fastboot.exe file and placed it and your twrp file into a folder on my desktop. Before I run fastboot and add your twrp img file, what would the next step be? .... I don't have have a ROM yet to add to the phone. Should I have that first? Would you please direct me to the right one for me? I noted in one of your replies to another member that there isn't a Marshmallow one, yet.
Do I need the ADB file?
Thank you,
Your Padawan.
Flyhalf205 said:
Yes. That is correct so far.
Click to expand...
Click to collapse
Would you recommend uninstalling the HTC program that automatically picks up the phone?
LoveSpock said:
I've been out of commission... Sorry about the long wait.
I'm sure you've been very busy.
I found the fastboot.exe file and placed it and your twrp file into a folder on my desktop. Before I run fastboot and add your twrp img file, what would the next step be? .... I don't have have a ROM yet to add to the phone. Should I have that first? Would you please direct me to the right one for me? I noted in one of your replies to another member that there isn't a Marshmallow one, yet.
Do I need the ADB file?
Thank you,
Your Padawan.
Click to expand...
Click to collapse
I forget if you were s-off or s-on but you will need to be s-off or your bootloader will need to be unlocked.. You don't need a rom just yet. You could flash recovery and flash root for starters. But once you get it flashed we can start on what to do next.
Update...
Flyhalf205 said:
Shouldn't worry about supersu. Most custom ROMs are going to have that prebuilt into it. Once you get TWRP we will go further into detail about how stuff works.
Click to expand...
Click to collapse
Flyhalf205 said:
I forget if you were s-off or s-on but you will need to be s-off or your bootloader will need to be unlocked.. You don't need a rom just yet. You could flash recovery and flash root for starters. But once you get it flashed we can start on what to do next.
Click to expand...
Click to collapse
Sorry... I started the thread back in January. I've been out of commission and starting over.
I had used Sunshine to S-off and Unlock. I used SU to root. I knew nothing about flashing or fastboot and am still learning. One of your original responses to my original post said that google was my friend, so I googled per your advice and found some information on fastboot.
I don't know what flash root means in your response above.
You had also gave me the link to the TWRP image for my phone. You also wrote "Make sure you have everything in the same directory when executing the command." I've added 2 of the pics again as well as one of your img file in the directory I created when I loaded Android Studio.
The Android Studio I downloaded is the latest. Does that make a difference? I did find info on this site about a minimal adb and fastboot. Would that have been better?
I'm imagining my phone will be out of commission until the new ROM is installed, right? (See how I'm still such a Newbie/Noobie!)
Thank you!
Your Padawan
Welcome to Twrp 3.0.0.0 for our Zenwatch 2's
This release I was able to flash the recovery, flash the supersu zip, and flash some others, so far I have not encountered our wild soft brick madness.
Thanks to @acbka for showing me how to get into log files, essentially helping me figure out why the partitions were not mounting correctly when I compiled and recompiled.
Here is TWRP 3.0.0.0
Directions:
Get into fastboot, either by enabling adb by enabling developer options going into settings, about, and taping the Build number 8 times, and going back, down to developer options and enable ADB Debugging.
Then you can type into your CMD or terminal adb reboot-bootloader or by powering down by holding the button or power down in settings, when the screen goes black, repress and hold the button and swipe the screen from the upper left down to the lower right and that should bring up the ASUS logo with CSC Fastboot Mode! on the screen
continue to boot the recovery by typing fastboot flash recovery twrp3.img
OR load up your tethered twrp and flash the image under that.
Hope you guys enjoy! So far I have not encountered soft bricks so it should be safe and sound
thank you, will test now
---------- Post added at 09:21 PM ---------- Previous post was at 09:01 PM ----------
Works perfectly, my zenwatch 2 is now rooted
thank you, you`re amazing
Thank you very much! I hope this will be one of the first steps into advanced development for our watches! Does this work for WI502Q? But what's a benefit of rooting this watch?
okaay3D said:
Thank you very much! I hope this will be one of the first steps into advanced development for our watches! Does this work for WI502Q? But what's a benefit of rooting this watch?
Click to expand...
Click to collapse
That im not sure, it might, wouldnt hurt to fastboot boot it and see if itll start twrp. I have the 501
Root will go with modifying the Momentum kernel so you wont have much lag on the watch, and any other root modifications that can go with it, like maybe xposed?
Next step in development is fixing twrp so it can be flashed, then maybe modifying the wear os? Or maybe porting some stuff
T10NAZ said:
As far as I understand people are able to get backups of their watch in order to preserve OTA's before rooting
Click to expand...
Click to collapse
I want to test it. But how do I backup my watch and restore it to get updates? And is there something like a KNOX-counter to tell whether the device was modified?
matze19999 said:
Works perfectly, my zenwatch 2 is now rooted
thank you, you`re amazing
Click to expand...
Click to collapse
what did u flash to get root? the one twrp offers (if this one does)? the one xda tv featured for 5.0.1 wear http://www.xda-developers.com/root-android-wear-5-0-1-xdatv/ ? or just the newest non-systemless supersu.zip used for phones? with a phone i would just flash away anything. but im a bit hestitant on the watch yet. couldnt find clear info yet.
Awesome! Got supersu flashed and was able to use Advanced Settings to disable some of the built-in bloatware apps. I'll have to try out the kernel but I'm currently at work and don't want to spend all day messing around with my watch (well... I want to, but I like not getting fired).
4RK4N said:
what did u flash to get root? the one twrp offers (if this one does)? the one xda tv featured for 5.0.1 wear http://www.xda-developers.com/root-android-wear-5-0-1-xdatv/ ? or just the newest non-systemless supersu.zip used for phones? with a phone i would just flash away anything. but im a bit hestitant on the watch yet. couldnt find clear info yet.
Click to expand...
Click to collapse
I do have the 5.0.1 wear downloaded and installed! And as far as i know, Its working ok
okaay3D said:
I want to test it. But how do I backup my watch and restore it to get updates? And is there something like a KNOX-counter to tell whether the device was modified?
Click to expand...
Click to collapse
You can tell twrp to preserve the system protection, back every single thing up that you can in the twrp option, push that backup to your computer, and then you can disable system protection. twrp itself wont do anything, however playing with options will modify the watch.
OR you can fastboot pull things off the watch, the system.img and boot.img yourself, in case the ones uploaded in my general thread didnt have the protection enabled.
If you want to hang tight until 1.4 comes out, that can be a good thing too
And im not sure if there is something like that on the watch. I have not seen anything about it before
My attempt was a failure on my WI502Q. I got the following messages. And, OP, how do you pull system.img from a device through fastboot? I thought you needed root permission to do that through adb.
"
C:\adb\zw2>fastboot boot recovery.img
downloading 'boot.img'...
OKAY [ 0.381s]
booting...
FAILED (remote: dtb not found)
finished. total time: 0.834s
"
Thanks for this! I was losing hope on any development for this watch but now we have the most crucial component to modifying anything on android, a custom recovery. Going to perform a backup, root and flash your custom kernel you kindly released as well!
T10NAZ said:
Hello everyone, I have been working hard last night to make twrp run on our watches, and this I think is a good representation on what itll be like with actual development going on
As far as I understand people are able to get backups of their watch in order to preserve OTA's before rooting, and I was able to flash some zips and kernels successfully, and I fixed the UI to look better and actually usable on the watch
Also, I was able to flash this puppy, and I got android wear to boot with it flashed, however most of the time, it goes haywire and only boots into recovery. Same thing applies, this shall be a Tethered recovery only until I know why its going crazy.
As always, problems can arise on your watch, so be careful!
read the entire instructions, This is a known way to get system protection off, and to flash zips/kernels when need be. Do not flash please.
Here is the link to the updated twrp
Get into fastboot, either by enabling adb by enabling developer options going into settings, about, and taping the Build number 8 times, and going back, down to developer options and enable ADB Debugging.
Then you can type into your CMD or terminal adb reboot-bootloader or by powering down by holding the button or power down in settings, when the screen goes black, repress and hold the button and swipe the screen from the upper left down to the lower right and that should bring up the ASUS logo with CSC Fastboot Mode! on the screen
continue to boot the recovery by typing fastboot boot recovery.img like the other one.
I also have a kernel underway if people would like to try it out and test it in the next couple days
Click to expand...
Click to collapse
What are the Advantages of installing TWRP in Zenwatch 2 WI501Q..???
does it allow to uninstall stock apps..!!
yash92duster said:
What are the Advantages of installing TWRP in Zenwatch 2 WI501Q..???
does it allow to uninstall stock apps..!!
Click to expand...
Click to collapse
it could lead to that, yea, since this is the only root method basically, it adds a few extra steps to do it
can we root with regular supersu .zip, or do we need a special build for wear devices?
slothdabski said:
can we root with regular supersu .zip, or do we need a special build for wear devices?
Click to expand...
Click to collapse
https://drive.google.com/file/d/0B3zB2zRyWlLBNmhwSmNBUEp1SVU/view?usp=sharing there ya go. dunno if the regular supersu works. havent tried that out. this one does. and alrdy has a busybox installer wear app included which u need anyway sooner or later.
there is no supersu manager app in it though like on phones. apps requiring root just have it. tested advanced settings so far for disabling built-in stuff and a reboot option. but maybe there is a supersu-wear.apk somewhere?
not my link. taken from here: http://forum.xda-developers.com/showpost.php?p=65759835&postcount=14 he took it from the G watch R forums iirc.
zenwatch2
hi dear freind
after the flash twrp recovery
after the wipe
my watch was brick and hang on asus logo
help me plase
mehdi.ahmadi said:
hi dear freind
after the flash twrp recovery
after the wipe
my watch was brick and hang on asus logo
help me plase
Click to expand...
Click to collapse
Let me know the steps you took from when you downloaded it, to when it sits on the asus logo, and do you have the 502 or the 501 watch?
mehdi.ahmadi said:
after the flash twrp recovery
Click to expand...
Click to collapse
guess that means he flashed it. now his watch is bricked. not that it hasent been mentioned NOT to flash it just fastboot boot ...
flash the stock images via fastboot or tethered (NOT flashed) twrp and you should get your watch working again.
4RK4N said:
what did u flash to get root? the one twrp offers (if this one does)? the one xda tv featured for 5.0.1 wear http://www.xda-developers.com/root-android-wear-5-0-1-xdatv/ ? or just the newest non-systemless supersu.zip used for phones? with a phone i would just flash away anything. but im a bit hestitant on the watch yet. couldnt find clear info yet.
Click to expand...
Click to collapse
I flashed this zip file
https://drive.google.com/file/d/0B3zB2zRyWlLBNmhwSmNBUEp1SVU/view
matze19999 said:
I flashed this zip file
https://drive.google.com/file/d/0B3zB2zRyWlLBNmhwSmNBUEp1SVU/view
Click to expand...
Click to collapse
found it about 2 weeks ago somewhere here on xda and alrdy linked it to several ppl here in the thread.
but thx
I had my phone rooted perfectly fine and I accidentally let an update get by me and now it's unrooted Android 12. I really need my boot.img from GN2200_11_C.10 or I need to know where to download a Pretooted GSI image that I can DSU Sideload so I can pull my own boot l.img.. thanks in advance!!
Where? I couldn't find it
ScarletWizard said:
Did u find it
Click to expand...
Click to collapse
No I still can't find this specific one?! Stinks!
termux4life said:
No I still can't find this specific one?! Stinks!
Click to expand...
Click to collapse
I appreciate your help though. Thank you for taking the time to respond back.
termux4life said:
No I still can't find this specific one?! Stinks!
Click to expand...
Click to collapse
Thank you for taking your time to respond though.
I'm looking for a specific boot.img. it's in the title.. you need to use the msm download tool to revert back to stock. Sounds like your partitions are messed up and I assume they weren't backed up. I was hard bricked at one point and the msm tool was the only way for me to fix it all and revert back to stock. Make sure it's the correct msm tool for your phone though.
ScarletWizard said:
Try
Or this
Wipe data after flashy
Wipe data
Too large I got several but too large to attach
Click to expand...
Click to collapse
Can you send me the link for the specific boot.img I'm looking for by chance? It's the 11_C.10 version.
ScarletWizard said:
I locked my Boot loader and now device is ****ed
Click to expand...
Click to collapse
Why you can't just unlock it again? Do you have the the T-Mobile version?
The bootloader is encrypted and OnePlus's token just gives you the private to match the public encryption that keeps the bootloader from being edited. In theory if you can discover what file type one plus's token is in and eextract that and somehow dump your bootloader you could possibly manually decrypt it.
Do you have access to a Personal Computer? I could offer some links to a few programs that may be worth trying. I doubt it could hurt trying.
I could use teamviewer to try to use my tools to force your bootloader to unlock also if you happen to not find a solution.
termux4life said:
Thank you for taking your time to respond though.
Click to expand...
Click to collapse
i have the exact one
termux4life said:
I had my phone rooted perfectly fine and I accidentally let an update get by me and now it's unrooted Android 12. I really need my boot.img from GN2200_11_C.10 or I need to know where to download a Pretooted GSI image that I can DSU Sideload so I can pull my own boot l.img.. thanks in advance!!
Click to expand...
Click to collapse
Pretooted, that's funny as can be. A pretooted sideload so he can pull his own.
Ok so 2 things..
1st: Jayram1408, for being a senior member I'm really surprised you'd laugh at me for asking a question or not knowing something. Usually this is a safe place to learn, ask questions, and receive feedback that's positive and informative. I don't know if you think others will laugh at me with you but I doubt it
2nd: I don't know what is funny in the first place, pre-rooted GSI for DSU Sideloading purposes do exist and that's a fact. It makes it so you can use Partitions Backup & Restore properly when the GSI is loaded. Please read https://forum.xda-developers.com/t/...g-boot-image-and-making-your-backups.4499447/
Hopefully that catches you up with the rest of us and hopefully in the future you are but more helpful then hurtful to members within the community.
Hey All,
I am trying to root my Nord N20, but am getting a bootloop when trying to boot boot_a after flashing a magisk25210canary patched boot_b image over boot_a. I am flashing a patched boot_b image over boot_a because I am too scared to flash magisk patched boot_b over boot_b (which contains the working OS). My version information is:
android 12
Build: GN2200_11_C.11 Kernel:5.4.147-qgki-ga9e7460afd8c