There is a new OTA for pixel experience rom. And it's asking for higher vendor firmware 9.2.15 to be exact.
How do i setup that update I am on old firmware and thats my first time being asked to have a higher vendor firmware.
Do I just download the vendor firmware flash it and dirty flash the update ?
Thank you in advance
Yes flash the new vendor
YanPH said:
Yes flash the new vendor
Click to expand...
Click to collapse
Should i flash dfe befor it ?
TheVow said:
Should i flash dfe befor it ?
Click to expand...
Click to collapse
After the vendor
How to check if you are using the latest vendor??
Just wipe everything than flash the latest vendor and then go on with the latest Pixel Experience rom. That's it.......
Pourush Sharan Bhargav said:
Just wipe everything than flash the latest vendor and then go on with the latest Pixel Experience rom. That's it.......
Click to expand...
Click to collapse
You don't have to wipe anything to flash the vendor or the update to the ROM. Don't go about giving wrong advice.
How i update pixel experience on poco f1 without wiping my phone?
How i update pixel experience on poco f1 because when i download the update it say click ok for restarting in recovery mode or something like that but doesn't happen anything so i downloaded the update manualy i restart it in twarp and try to install it but apears a error: 7 "This package requires firmware from MIUI 9.4.26 developer build or newer. Please upgrade firmwere and retry!" What i have to do to update it without wipeing my phone??
Just flash latest vendor from here https://mirror.akhilnarang.me/MIUI/beryllium/ then update the rom, you don't have to wipe anything
Thanks!!!
Thank you very much man, it works!!! :good:
Related
Hi guys,
Anyone can guide me how to flash to the latest Official CM13? Currently my device is KIW-L22 running 13.0-20160718-UNOFFICIAL-kiwi. It's been too long since I got time to browse XDA and is really lost on the steps.
Assist me pls! thanks!
awesomeandroid said:
Hi guys,
Anyone can guide me how to flash to the latest Official CM13? Currently my device is KIW-L22 running 13.0-20160718-UNOFFICIAL-kiwi. It's been too long since I got time to browse XDA and is really lost on the steps.
Assist me pls! thanks!
Click to expand...
Click to collapse
To flash the latest version of CM, be sureto have updated your phone officially to Stock Marshmallow. If not latest CM will not flash. You an error.
I'm guessing your phone is Indian version? Anyways go to the huawei website of your country. Download the marshmallow software file there and upgrade it through force update like i recommended here -> http://forum.xda-developers.com/honor-5x/help/gr5-help-t3443573
I think you should go into your current custom recovery first and wipe data/factory reset. So u don't get bootloop as a result of CM files being on board currently.
The firmware in the link above is not for your country/device but for Egypt KII-L21CUST185.
So get the correct file for your device for your country's huawei website as mentioned above.
After flashing successfully, you have to flash custom recovery, again. Remember the whole 'fastboot flash recovery recovery.img' process then flash SuperSU in custom recovery to root? Yeah do that.
Now you can flash latest CM build again. Cheers!
Note: If your country doesn't have marshmallow (6.0.1) available, don't bother with the process as latest CM build will not flash.
stanley08 said:
To flash the latest version of CM, be sureto have updated your phone officially to Stock Marshmallow. If not latest CM will not flash. You an error.
I'm guessing your phone is Indian version? Anyways go to the huawei website of your country. Download the marshmallow software file there and upgrade it through force update like i recommended here -> http://forum.xda-developers.com/honor-5x/help/gr5-help-t3443573
I think you should go into your current custom recovery first and wipe data/factory reset. So u don't get bootloop as a result of CM files being on board currently.
The firmware in the link above is not for your country/device but for Egypt KII-L21CUST185.
So get the correct file for your device for your country's huawei website as mentioned above.
After flashing successfully, you have to flash custom recovery, again. Remember the whole 'fastboot flash recovery recovery.img' process then flash SuperSU in custom recovery to root? Yeah do that.
Now you can flash latest CM build again. Cheers!
Note: If your country doesn't have marshmallow (6.0.1) available, don't bother with the process as latest CM build will not flash.
Click to expand...
Click to collapse
Noted with thanks! It's really clear what you've explained! :good:
awesomeandroid said:
Noted with thanks! It's really clear what you've explained! :good:
Click to expand...
Click to collapse
Glad i could help. Take care.
stanley08 said:
Glad i could help. Take care.
Click to expand...
Click to collapse
Bummer, on Malaysia official website, only official Lollipop and not Marshmellow.
awesomeandroid said:
Bummer, on Malaysia official website, only official Lollipop and not Marshmellow.
Click to expand...
Click to collapse
they should skip to nougat now
PalakMi said:
they should skip to nougat now
Click to expand...
Click to collapse
Impossible? Lol
awesomeandroid said:
Impossible? Lol
Click to expand...
Click to collapse
Haha yup
PalakMi said:
Haha yup
Click to expand...
Click to collapse
Hey guys, it's been awhile again, and I've yet to flash as accordingly taught. So is there already any easier method than flashing stock MM based EMUI and flashing again to custom?
I wanted to know what's the most stable and well maintained ROM here?
All are maintained ,but havoc is good
ryan7646 said:
I wanted to know what's the most stable and well maintained ROM here?
Click to expand...
Click to collapse
Aex rom.
naik2902 said:
Aex rom.
Click to expand...
Click to collapse
I'm on lineage )s 14.2. Can I just flash that without any problem?
ryan7646 said:
I'm on lineage )s 14.2. Can I just flash that without any problem?
Click to expand...
Click to collapse
No. This is aosp extended Android 8.1. It also has official inbuilt ota updates. And most customization.
This is higher android version. U must fully clean flash
First Format data must do
Then Wipe data reset
Flash aex 5.8 rom
U must flash august latest gapps nano recommended
Reboot
[email protected] said:
All are maintained ,but havoc is good
Click to expand...
Click to collapse
Looks like too many issues are being reported on its thread.
naik2902 said:
No. This is aosp extended Android 8.1. It also has official inbuilt ota updates. And most customization.
This is higher android version. U must fully clean flash
First Format data must do
Then Wipe data reset
Flash aex 5.8 rom
U must flash august latest gapps nano recommended
Reboot
Click to expand...
Click to collapse
Sorry. I'm new to this. Can I do that all in twrp czx? Bootloader is not unlocked as it took time so I am using twrp CZX as another way to flash roms.
ryan7646 said:
Sorry. I'm new to this. Can I do that all in twrp czx? Bootloader is not unlocked as it took time so I am using twrp CZX as another way to flash roms.
Click to expand...
Click to collapse
Flash latest official twrp 3.2.3.
I dont know if zcx is regularly updated for bugs.
Some say nowadays on kenzo custom rom can be installed without Bootloader unlocking. I didnt try it so idont know. u r on ur own.
naik2902 said:
Flash latest official twrp 3.2.3.
I dont know if zcx is regularly updated for bugs.
Some say nowadays on kenzo custom rom can be installed without Bootloader unlocking. I didnt try it so idont know. u r on ur own.
Click to expand...
Click to collapse
Thanks. Yeah. Mine can flash roms with locked bootloader. So I have to try and just be careful. lol.
So after checking the Xiaomi firmware site (didn't work, flashing the weekly firmware just appeared as stable) I haven't been able to get the developer firmware.
Does anybody know where I can get a hold of it without the MIUI ROM.
(It's needed for the latest Pixel Experience update and it isn't included with the update)
Title is meant to say MIUI ROM not room, autocorrect sorry.
dudeisbrendan03 said:
So after checking the Xiaomi firmware site (didn't work, flashing the weekly firmware just appeared as stable) I haven't been able to get the developer firmware.
Does anybody know where I can get a hold of it without the MIUI ROM.
(It's needed for the latest Pixel Experience update and it isn't included with the update)
Title is meant to say MIUI ROM not room, autocorrect sorry.
Click to expand...
Click to collapse
Always go here for latest vendor firmwares
https://mirror.akhilnarang.me/MIUI/beryllium/
and never use beryllium-V10.1.3.0-9.0-vendor-firmware.zip - this is an older version, even though the version number is higher than 9.
jackiass said:
and never use beryllium-V10.1.3.0-9.0-vendor-firmware.zip - this is an older version, even though the version number is higher than 9.
Click to expand...
Click to collapse
Whats going to happen if i flash the latest 9.2.25 vendor fw on global stable 10.2.2.0???
I get the same message when I want to install the ROM. I'm stuck and don't know what to do? Has anyone any tips to succesfully install the Pixel Experience ROM on a Pocophone?
DFlower said:
I get the same message when I want to install the ROM. I'm stuck and don't know what to do? Has anyone any tips to succesfully install the Pixel Experience ROM on a Pocophone?
Click to expand...
Click to collapse
Have you tried doing the above steps mentioned??
I mean..
Download and install via twrp the latest vendor firmware ,, about 400mb in size..
Then flash fde... Then flash the PE rom???
santiagoruel13 said:
Have you tried doing the above steps mentioned??
I mean..
Download and install via twrp the latest vendor firmware ,, about 400mb in size..
Then flash fde... Then flash the PE rom???
Click to expand...
Click to collapse
Thanks for your help, I used the wrong firmware version. I now used this file/version ->beryllium-9.2.25-9.0-vendor-firmware.zip and this worked fine !
From the link you mentioned -> https://mirror.akhilnarang.me/MIUI/beryllium/
DFlower said:
Thanks for your help, I used the wrong firmware version. I now used this file/version ->beryllium-9.2.25-9.0-vendor-firmware.zip and this worked fine !
From the link you mentioned ->
Click to expand...
Click to collapse
cva_kabil said:
Always go here for latest vendor firmwares
Click to expand...
Click to collapse
Is this dev or stable firmware?
dudeisbrendan03 said:
Is this dev or stable firmware?
Click to expand...
Click to collapse
Dev. That's why you need it even though you are coming from the latest official miui.
How to get a phone mi mix3
Need help guys I can't install any rom on my poco f1 showing error code 7
Please help me guys as soon as possible
Please reply
Currently I am on twrp 3.2.3-2
Last rom i wiped from twrp that was miui 10 which I was updated from ota
dawoodrangrez said:
Need help guys I can't install any rom on my poco f1 showing error code 7
Please help me guys as soon as possible
Please reply
Currently I am on twrp 3.2.3-2
Last rom i wiped from twrp that was miui 10 which I was updated from ota
Click to expand...
Click to collapse
First flash new vendor mirror.akhilnarang.me/MIUI/beryllium/ latest atm is 9.4.25 i think. You should ofcourse clean wipe before doing the vendor. After flashing the vendor the rom should no longer give error 7
Thanks bro i will try
After flashing this can i flash miui 10 rom also??
dawoodrangrez said:
After flashing this can i flash miui 10 rom also??
Click to expand...
Click to collapse
I am not sure mate i only ever did custom roms on this device. Currently am on crdroid and it has been smooth so far.
Btw thanks for reply
Do u play pubg ?
how is pubg performance on that rom which you are using??
dawoodrangrez said:
Do u play pubg ?
how is pubg performance on that rom which you are using??
Click to expand...
Click to collapse
Personally i don't play pubg but some of the people in telegram group do so support is in the chat group if needed some seem to change kernel to gain some performance but i think it performs good enough unless you have touch issues that some fts users have
I would not recommend flashing miui through twrp as many have reported that it bricks the device or maybe they are just doing something wrong
Twrp is best for custom roms
Use mi flasher for flashing miui
dawoodrangrez said:
After flashing this can i flash miui 10 rom also??
Click to expand...
Click to collapse
You don't have to flash any vendor zip if you're going to flash MIUI 10. If you wish to flash MIUI 10 for example from en.miui.com the global MIUI 10 then you can just flash the MIUI zip following magisk if you wish to have root then just reboot. You will have to flash the vendor zip if you wish to flash custom rom as custom rom don't have vendor firmware in it. Flash vendor first then the custom rom zip following with gapps and mod optional.
And yeah, if you flash custom rom and then flash MIUI back you might get region locked where you cant change the region, but I've solved that by flashing cust.img from global image zip using fastboot, this is because the cust partition isn't installed properly. It's the best to flash using Mi Flash, but it will encrypt you device. Do it on your own risk, im just simply sharing from my experience and im not responsible if your device change to iOS.
dawoodrangrez said:
After flashing this can i flash miui 10 rom also??
Click to expand...
Click to collapse
Yes you can flash any Miui Rom via TWRP Download The Flashble Zip Not the Fastboot One.
But When You will flash Stock MiUi 10 Rom Via TWRP You will Loose All Of Your Data.
You Need to Flash DFE After Flashing Stock One.
If You want To Flash Custom Rom
Flash Vendor
Flash Rom and Gapps
If You Want To Root Flash Magisk.
And Then Any Custom Kernel.
Reboot to System.
I'm on official miui 10 version 10.3.7 and I have twrp installed and rooted with magisk. I wanna keep the root but also upgrade to 10.3.8.
How should I do this?
You can install the globe rom from this side.
https://mi-globe.com/miui-firmware-rom-builder-features/65/
Click on miui 9.6.27 and then select the 10.3.8.0 stable version.
Configure what ever you want and flash it with twrp.
ParsaMrrelax said:
I'm on official miui 10 version 10.3.7 and I have twrp installed and rooted with magisk. I wanna keep the root but also upgrade to 10.3.8.
How should I do this?
Click to expand...
Click to collapse
Install new room + magisk with TWRP. Dont wipe data, dirty flash rom.
Alvian_P said:
Install new room + magisk with TWRP. Dont wipe data, dirty flash rom.
Click to expand...
Click to collapse
Should I download the full rom or only the ota update zip? what about FED ? should i flash that as well?
ConradB said:
You can install the globe rom from this side.
https://mi-globe.com/miui-firmware-rom-builder-features/65/
Click on miui 9.6.27 and then select the 10.3.8.0 stable version.
Configure what ever you want and flash it with twrp.
Click to expand...
Click to collapse
Thanks very much. This a very nice site