Hi everybody,
I was on rooted and rebranded ALP-L29C432B148 (before rebranding it was L29C636 as far as I remember) and wanted to go back to Stock. I flashed the ALP-L09C432B149 firmwarefrom this thread
https://www.android-hilfe.de/forum/...nstall-stock-rom-mate10-mate10pro.882911.html
and then after sucessful flashing the buld-nr. showed ""System 8.0.0.046 (0FTC)". To get the correct buoild-nr and to be able to receive ota updates I wanted to rebrand again and install the ALP-L09C432B148 from this thread
https://www.android-hilfe.de/forum/...jeder-version-zum-alp-l09-l29c432.882774.html
again to use the rebrand mod again. This wasn't successful as the firmware install failed. After that I couldn't install any firmware (neither B149 nor B148). If I install twrp-alp-firedance it shows only the twrp startscreen, but I can't access twrp.
Further more I'm not able any more to push any files to the phone, it fails with "adc couldn't create file..Is a directory" Flashing files via adb works.
What can I do now to get back a working system with stock rom?
Thank you very much in advance for your help!
Related
Hello,
after putting the phone into a new case and into the original packing for a week, the phone seems to be bricked. I dont know what happend, maybe the buttons were pushed for some days.
Some facts:
B121 stock rom, rooted with TWRP by Cofface (chinese language)
Micro SD card = WORKING
ADB/Sideload = NOT WORKING
The phone always boots into TWRP, I can't flash the stock rom via fastboot because ADB is not working. I tried to install a custom rom via "install from zip" but i seems the rom requires B330 firmware to be installed first.
When I try to run the Sideload feature, it says "Starting ADB sideload feature" for a while, then some wild chinese error occurs and that's it.
I guess my only chance to repair this is to install a stock backup.
Can anybody please upload a backup to Mega? I will reward a working backup with a paypal gift
EDIT: Please guys, any advices would be appreciated.
Can I replace the .img files in a custom rom zip with the .img files from the stock firmware?
Thanks a lot
Hello,
I need a stock recovery and stock rom for Huawei ShotX (p 7i)
version ATH UL-01
I searched google but unfortunately ineffectively, maybe someone has a link to the above?
shaq8 said:
Hello,
I need a stock recovery and stock rom for Huawei ShotX (p 7i)
version ATH UL-01
I searched google but unfortunately ineffectively, maybe someone has a link to the above?
Click to expand...
Click to collapse
I think you should flash the stock firmware
ok, but how? I currently have twrp not a stock recovery. from what I read to reflash stock rom, should have stock recovery because at trwp can not be done. I understand that as a stock firmware You understand the stock rom? or maybe something else?
@shaq8 you posted in the wrong forum buddy.
But to answer your question I found a Lollipop stock package for your device.
Thanks for the link DigiGoon
but how to flash new firmware? All descriptions refer to the dload method, which I can not use because I do not have stock recovery. Is there any method to reflash new firmware having trwp instaled?
and in fact my mistake. the topic was to be started in the P7 section. If an admin will go on this thread , please transferred to the Huawei P7 section
shaq8 said:
Thanks for the link DigiGoon
but how to flash new firmware? All descriptions refer to the dload method, which I can not use because I do not have stock recovery. Is there any method to reflash new firmware having trwp instaled?
and in fact my mistake. the topic was to be started in the P7 section. If an admin will go on this thread , please transferred to the Huawei P7 section
Click to expand...
Click to collapse
No worries, I'll help you regardless of in which section your thread resides.
So, to flash the UPDATE.APP, follow these steps:
First download the package from the link I provided.
Extract it, and find UPDATE.APP
Now you have to extract the stock recovery from UPDATE.APP using Huawei UPDATE Extractor tool.
After pulling recovery.img you have to flash it to your device via bootloader.
Boot into bootloader mode and flash the recovery by firing this command:
Code:
fastboot flash recovery recovery.img
Now you have Stock recovery installed.
I hope you are on Lollipop only, if your device was rooted, you have to first flash .img files manually and then force update it via UPDATE.APP.
If your device is not rooted then put the UPDATE.APP in dload folder in your External SDCARD, and press the three button combo after switching off your device, the update process will start then.
I hope this clears something.
the phone has root.
Custom recovery already loaded and working.
I understand that now I have a reflash of all files from update.app? the sequence of flashing files has any meaning?
I ask because I would not want to mess up more in the phone
shaq8 said:
the phone has root.
Custom recovery already loaded and working.
I understand that now I have a reflash of all files from update.app? the sequence of flashing files has any meaning?
I ask because I would not want to mess up more in the phone
Click to expand...
Click to collapse
No, you can flash them in any sequence. It doesn't effect in any way.
everything works, phone alive
DigiGoon thank you very much for your help, you saved my life
i have the same broblam but i did not understand anything
I got it fixed by just flashing the stock recovery instead of full ROM.
Stock Recovery here :
https://forum.xda-developers.com/honor-7/development/recovery-huawei-shot-x-aka-honor-7i-t3548163
i hve update my device huawei ATH-TLOOH,but when i try to reflash it through bootloader,it show error(Unlock frp first)
But by device is not started,i try to unlock it through frp erase tool bt it asks 16 digit unlock key,
my mobile is hong kong made,i cant find imie num bcz on the back of my mobile there is chinese language and no imie num is written...
em suck and helpless cant understand what to do...
cant find exact firmware version but if find it says software installation failed also...plz help me
Hi guys, i got my H9 yesterday and because i thought i read enough on this forums i wanted to unlock it then install TWRP and install superSU to gain root access and stick with the stock firmware.
Unlocking went perfectly fine,phone booted to OS, than i flashed twrp 3.1.1-1 as advertised here and made a factory reset. Phone was stuck in bootloop for unknown reason.
I made several wipes and somehow managed to check all boxes in the wipe menu which erased the whole OS.
Now i read here that others have the "no OS" problem too but because i still have all unlocked fastboot and twrp i wanted to ask which method is best to flash back the original FW.
Which stock ROM is safe to install? i have european H9 is STF-L09C432B170 the right one for me?
Which method is the best to install it? Copy the 3 zips to internal stoagre via OTG device and install it out of twrp? I read that there is also a force method where users can push vol up, vol down and power simultaneously and enter the huawei install force mode.
I am quite sad that the phone was stuck in bootloop after twrp install and still dont know what caused it. When i install it from twrp there are 3 zips: update, data full public , hw eu. In which order do they have to e installed and is one of them overwriting the TWRP recovery?
Please give me a short hint/procedure, im quite afraid that i cant get my phone back to work and it is brand new. I dont know what caused the unsolvable bootloop.
Best regards and many thanks
Hi.
Check this:
https://forum.xda-developers.com/showpost.php?p=73334439&postcount=1
This help you.
Regards
thanks for the hint but i cant find a solution for me there.
ut this
i copied the 3 .zip files to internal today but TWRP doenst allow me to write them it fails with "write err errno 9"
then i tried to copy the update.pp in DLOAD folder on micro sd but this is not possible because filesize is over 2gb. i tried to format micro sd with twrp to exfat but it till doesnt work. please give me a little hint what to do im completely desperate about the situation.
Today i installed Huawei Multitool and extracted the .img file out of the update.app files, i was able to flash all 4, system, boot, recovery and cust.
Now the rec. menu is back to stock and everything got installed but the phone still isnt booting. i think it is because i missed the userdata.img which i cant find anywhere.
Other users here have the same problem. Is there a firmware package which includes all 5 .img data?
Best regards
i found the official huawei service full repair firmware with all necessary files for unbrick (system, cust, recovery, userdata, boot) flashed them via fastboot but stil device is "hanging" after the warning message that its unlocked. i think it is because i wiped vendor data in twrp but i cant flash vendor.img in fastboot. it is included in the fw package but cant be transfered to phone via fastboot. it stops at part 1/2 because the filesize allowd is around 470mb max but the extracted file has a size of 670. anyone know what to do?
Best regards
You need to go via the Rebrand way with no rebrand. I had the same problem and was trying to use the multitool without success. The oeminfo can be flashed alternatively if it fails during the HWOTA process.
https://forum.xda-developers.com/honor-9/help/how-flash-oeminfo-t3657499
ok i download all the folders with the .bat file. Then i download C432B150 from the czech site and add it to the update folder. Than i rename the 3 files accoding to the manual and run the .bat file but without rebranding right?
Des this tool any different than the HuaweiMultiTool or fastboot with flash command?
Best regards
I treid out HWOTA, the first step installing twrp is successful than i disattach usb cable as described and enter twrp. Then it says in twrp i have to connect again and press enter but then the bat file stops and doenst go on. i dont come to the point where i can choose rebrand or flash firmware.
Whats wrong here?
edit: i saw in the .sh file that the script executes wait_adb but my phone is not entering adb mode as it seems when in main screen of twrp. is this normal or do i have to set it manually in twrp
best regards
I was able to install the B130 now via 3 button recovery. Now im on B130 but cant update elsewhere. Also the 2 capacitive buttons are not working. Bootloader is locked again. Everything is stock and the phone runs great. When i update with the 3 buton method from external sd, which firmware should i use? i tried B150 full OTA but it aborts after 5% with an error. Do i only need to get a small OTA package now?
How can i put my cap. buttons back to work? Too bad only the 3 button method worked to recover the phone.
Best regards and many thanks.
I did the HWOTA with b120 firmware and then used firmware finder to update to b150.
The bug with capacitive buttons is present till Oreo. I use the home button gestures anyways.
Hope it helps.
ok, thats bad but they worked with the initial revision of b130 and b150 when i downloaded it OTA. Is this something like a fuse like.knox at samsung which happens at custom flashing?
Sent from my GT-I9300 using Tapatalk
the HWOTA method doesnt work, the batch file gets stuck after connecting the phone in twrp back to computer. in script it says wait_adb but it is not recognized somehow.
do u know a solution? anotherone here got that problem too.
im very afraid of that, i read here that everything related to twrp 3.1.1-0 and 3.1.1-1 is problematic a lot of people cant boot after installing twrp and can wipe whtever they want the phone never boots fully
whats the difference in the B130/B120 the phone came from huawei and the version flashed via tools? when i got it everything worked
i have this version.
ok so install twrp have frq and bootloader unlocked and then do backup out of recovery? with your file? can you provide download link? is this then a zip file?
I want to solve the thread and how i solved problem.
The B130 service firmware by huawei could be installed via 3 button method, than i was able to go up to the newest B180 via firmwarefinder and DNS method but with not working cap. buttons and flash etc.
Yesterday i installed TWRP 3.1.1-1(temporary) via HWOTA.zip method (ireplaced the older twrp in recovery folder) and successfully installed B120 and got the buttons etc working again. Then installed root and now system works fine and is rooted. My mistake was to install twrp over B130 or B150 which i downloaded OTA at the first day i got the phone. I tested this yesterday to install TWRP along with B150 and unlocked bootloader, infinite bootloop again. With B120 the TWRP 3.1.1-1 works out of the box without any loops.
The 2 trouble solvers where B130 service firmware and HWOTA with B120.
The external SD had to be inserted in card reader on PC because of the large filesize of the B130.
I would recommend to everyone before starting to play with the H9 to move the B130 folders to phone while it is still accessible. When everything bricks like in my case and u still have twrp than you can go to twrp main screen and connect phone to computer to rename the folder with B130 to "dload" and arrange update.app accordingly on PC or in TWRP file manager.
Can i set this topic to [SOLVED] myself?
Best regards
https://forum.xda-developers.com/honor-9/development/firmware-huawei-honor-9-stf-l09-stock-t3696892
this works flawlessly with 3 button method
I just bought a Huawei Mate SE which is a newer phone that looks like the Honor 7x. I've noticed whenever I search for Huawei Mate Se custom roms, recoveries, and even stock roms I only find Mate 9 stuff and find my self desperate with no support of root, and anything else. I found an article called "How to : Huawei Mate SE Root & TWRP Recovery" , and I successfully unlocked the bootloader, and I successfully installed twrp. The text on the bottom I didn't see which said to install the dm-verity thing. I ran into the problem where there were all these folders were displaying weird text in the main partitions, so instead of installing the version they told me, which was the no-verity-opt-encrypt-4.1.zip, I installed the latest which was the no-verity-opt-encrypt-6.0.zip version, which soft bricked. So I thought I could fix this by installing a custom ROM. But there were none, so I tried to install cm13 honor 7x rom and It didn't work. I tried installing the correct version after the rom. So even now if I tried to revert the old boot img it still wouldn't work because of the rom. However, since my bootloader is unlocked there is definitely a way I can fix all this. But the problem is their is not any Huawei Mate SE roms anywhere. I need a stock rom for my phone (possisbly a custom rom), or some fix. I can access my recovery, and the bootloader, but not anything else. My model is the BND-L34, pls help.
I did the same thing. Got it working
Put this in twrp back up folder on external SD card. Restored both files then factory reset in twrp. It worked for me every thing works. unzipped with Windows pc
Can't post links. Post [EMUI 5.1] OTA Firmwares and Unbrick Phone method. In Huawei 7x thread post#139 by AlexxC might be easter to search his posts. I have mate se in us on tmo/MetroPCS I flashed the correct 4.1 and still got soft brick. That article cost me couple hours. rooted with honor 7x method. Guess it really is the same phone with extra gig of ram. To AlexxC thanks, you the man
bradass402 said:
Put this in twrp back up folder on external SD card. Restored both files then factory reset in twrp. It worked for me every thing works. unzipped with Windows pc
Can't post links. Post [EMUI 5.1] OTA Firmwares and Unbrick Phone method. In Huawei 7x thread post#139 by AlexxC might be easter to search his posts. I have mate se in us on tmo/MetroPCS I flashed the correct 4.1 and still got soft brick. That article cost me couple hours. rooted with honor 7x method. Guess it really is the same phone with extra gig of ram. To AlexxC thanks, you the man
Click to expand...
Click to collapse
I tried the manual method of unbricking with multi touch and the phone booted, but it is a black screen, and I only see the home, back and tabs buttons. So after i figured out to use the backup that you sent me and it still wouldn't boot.
Are you getting errors in twrp restore you have to mount the partitions that your restoring boot system data etc
bradass402 said:
Are you getting errors in twrp restore you have to mount the partitions that your restoring boot system data etc
Click to expand...
Click to collapse
i did what you said in the pm, and got the cust.img flashed, but now it bootloops to the recovery
tomjfmu said:
i did what you said in the pm, and got the cust.img flashed, but now it bootloops to the recovery
Click to expand...
Click to collapse
Why dont you boot into huawei eRecovery? It downloads the firmware and recovery and recovers your phone.
Hello.
I have the Huawei Mate 10 Lite phone in my hands. I wanted to change the system to some custom OS and something went wrong.
I unlocked the bootloader, uploaded TWRP and everything was OK. Problems started during Lineage install (the same with AICP). The system did not boot after installing.
At the moment only eRcovery is running but also can't install anything. I suspect this is due to the lack of original recovery. I extracted the RECOVERY.IMG and RECOVERY2.IMG files from the UPDATE.APP file.
However, I can't install them because I get this error:
-=edit=-
After many attempts to repair using information from the internet, I was able to repair the phone with this post - https://forum.xda-developers.com/showpost.php?p=76640204&postcount=79
Many thanks to @Chisetdel31260 for his great work and this post