[KERNEL][BERYLLIUM][4.9.y] Canting 3.6 [22/08/2021] - Xiaomi Poco F1 ROMs, Kernels, Recoveries, & Other

INTRODUCTION
Canting is a kernel based on Google Common 4.9 merged over CAF-kernel.lnx.4.9.r25-rel. Built to provide security and stability improvement
Code:
/*
* I am not responsible for bricked devices, dead SD cards, thermonuclear
* war, or the current economic crisis caused by you following these
* directions. YOU are choosing to make these modificiations, and
* if you point your finger at me for messing up your device, I will
* laugh at you.
*/
FEATURES​----------------------------------------------
• NOTE: Don't flash this kernel over MEMEUI.
• Linux version 4.9.280
• CAF Tag LA.UM.8.3.c25-03100-sdm845.0
• Build with Clang-12
• CPU Governors: schedutil, powersave
• I/O Schedulers: noop, cfq
• Compat vDSO from Pixel kernel
• TCP Congestion Algorithm: bbr, westwood, reno, cubic
• WireGuard VPN support (Current version: 1.0.20210424)
• Boeffla wakelock blocker (Nothing is blocked by default)
• Simple Low Memory Killer
• Sound Control: Speaker, Microphone, Headphone (Per-channel control)
• KCAL & KLapse Interface
• Vibration Intensity Control
• backlight min option
• Removed safetynet flags (no need of magisk to bypass safteynet)
• F2FS & NTFS Support
• for more info check my commits
INSTALLATION INSTRUCTIONS​
Download latest kernel version
Boot to recovery
Flash kernel.zip
reboot to system
DOWNLOAD LINK
Github Latest Release
CREDITS
• nathanchance
• bgcngm
• abhishek987
• fransiscofranco
• flex1911
• All of contributors from my git history​
XDA:DevDB Information
Canting, Kernel for the Xiaomi Poco F1
Contributors
khusika
Source Code: https://github.com/khusika/canting_kernel_xiaomi_sdm845
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: 3.6
Stable Release Date: 2021-08-22
Created 2019-03-05
Last Updated 2021-08-22

Reserved

Reserved

Nice will test it out

Vibration Intensity Control - anymore details on this? My biggest complaint on this phone is the weak vibration.

veekay said:
Vibration Intensity Control - anymore details on this? My biggest complaint on this phone is the weak vibration.
Click to expand...
Click to collapse
You can change that "strength" in any kernel manager app if this enabled by kernel. I am sure that's it. I am using FK Manager app for these.
About kernel, looks and sounds cool, give it a try.

Handle this phone too now? I know you on Mia1 forum.
Sent from my Poco F1 using Tapatalk

Hi. If u remember me from mi a1 canting thread. I asked u about F2FS and somethings there
Is there any telegram ID I can msg u?

Good job, smooth and also CPU temp does not rise much.

Parthalucky said:
Hi. If u remember me from mi a1 canting thread. I asked u about F2FS and somethings there
Is there any telegram ID I can msg u?
Click to expand...
Click to collapse
Better to discuss it here

Release 0.2
New build is up
Changelogs :
Merge 4.9.163
Upstream with Lineage tree
Upstream with Google Common 4.9
Fix various clang warn
Add power saving flags to the panels
Introducing KLapse - A kernel level livedisplay module v4.3
clk: qcom: clk-cpu-osm: Use CLK_GET_RATE_NOCACHE
Download link in the OP, enjoy it

I love this kernel
Using it with the latest PE CAF release and it's butter smooth and gives a good SOT

Release 0.3
New build is up
Changelogs :
Merge 4.9.164
Download link in the OP, enjoy it

Release 0.2
New build is up
Changelogs :
Merge 4.9.164
Download link in the OP, enjoy it

Can you please add Adreno Boost V2.2 to your kernel?

Does this kernel work in miui global beta or stable release??

Pronabesh said:
Does this kernel work in miui global beta or stable release??
Click to expand...
Click to collapse
Read OP

abid52 said:
Read OP
Click to expand...
Click to collapse
Sorry bro...but cant able to find what i am seeking in OP.

Pronabesh said:
Sorry bro...but cant able to find what i am seeking in OP.
Click to expand...
Click to collapse
No not supported

Release 0.4
New build is up
Changelogs :
Merge 4.9.165
Upstream with Lineage tree
Upstream with Google Common 4.9
Merge upstream f2fs-stable/linux-4.9.y
Download link in the OP, enjoy it

Related

[KERNEL][OREO][32/64Bits] ALIZE-KERNEL [GCC7.X][12/24][POTTER]

ALIZE KERNEL FOR OREO​
/*
* Your warranty is... Still valid??.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
WON'T WORK ON STOCK BASED ROM
Here is the thread for the Nougat variant ALIZE KERNEL FOR NOUGAT/STOCK :good:
Introduction:
The main objective of the kernel is to give to any user, a stock kernel with some tweaks like new CPU govenor focused on battery, performance and both of them, I/O scheduler, ...
Click to expand...
Click to collapse
Features:
Updated to lastest Motorola source
Kernel upstreamed to lastest source (3.18.89) compiled with Linaro-7.2
Boeffla Wl Blocker
Maple I/O sched
Frandom for random number
Wakeup boosted (time in milliseconds instead of seconds)
CRC check disabled (Performance boosted)
Vibration control
Sound control
Kcal support
Backlight dimmer
Fsync support
Safetynet patch
Makefile: -0fast, -O3 and Graphite optimizations
LZ4 compression (instead of XZ)*
Faster boot (higher read_ahead size for bootup)
Wireguard support
All feature of the boulzordev's kernel
Many other tweaks (check github)
Click to expand...
Click to collapse
Download (OREO)
**Oreo(V42 - 64 bits)**
Download: https://sourceforge.net/projects/alize/files/Oreo/64bits/Alize-8.x_v42-64bit.zip/download
Changelog: https://github.com/Martichou/alize_potter/commits/a8x
Click to expand...
Click to collapse
**Oreo(V22R - 32 bits [won't be supported anymore])**
Download: https://sourceforge.net/projects/alize/files/Oreo/Alize-8.x_v22R.zip/download
Click to expand...
Click to collapse
How to flash:
1. Download Alize for Potter
2. Reboot to recovery
3. Flash kernel's zip
4. Reboot and tweak with proper app (Kernel auditor, Ex kernel manager, ...)
Click to expand...
Click to collapse
*Learn more about LZ4
- https://events.linuxfoundation.org/sites/events/files/lcjpcojp13_klee.pdf
- http://catchchallenger.first-world.info/wiki/Quick_Benchmark:_Gzip_vs_Bzip2_vs_LZMA_vs_XZ_vs_LZ4_vs_LZO
TELEGRAM GROUP:
https://t.me/joinchat/EWMwLkNn0rIRNNctA75U3A
Credits:
Lineage Team
Acuicultor
Vache (for source and Oreo, and so many things)
fAiyaZ (for upstreamed the kernel from .32 to .61 and more things)
And many other.. (PM if you want me to add you.)
XDA:DevDB Information
ALIZE, Kernel for the Moto G5 Plus
Contributors
Martichou
Source Code: https://github.com/AlizeKernel/alize_potter
Kernel Special Features:
Version Information
Status: Stable
Created 2017-11-06
Last Updated 2017-12-30
THANK YOU!
New update is up !
- Upstreamed to .80
- Support Pixel Experience ROM. (binder now use 64 Bits)
This version should not work on older oreo rom as they won't have lastest commit.
https://sourceforge.net/projects/alize/files/Oreo/Alize-8.x_v141.zip/download
Martichou said:
New update is up !
- Upstreamed to .80
- Support Pixel Experience ROM. (binder now use 64 Bits)
This version should not work on older oreo rom as they won't have lastest commit.
https://sourceforge.net/projects/alize/files/Oreo/Alize-8.x_v141.zip/download
Click to expand...
Click to collapse
Is XenonHD ROM considered older? I know he's implemented your kernel into his ROM.
Martichou said:
New update is up !
- Upstreamed to .80
- Support Pixel Experience ROM. (binder now use 64 Bits)
This version should not work on older oreo rom as they won't have lastest commit.
https://sourceforge.net/projects/alize/files/Oreo/Alize-8.x_v141.zip/download
Click to expand...
Click to collapse
Please elaborate on the 64 bits ...and thank you
JoRocker said:
Is XenonHD ROM considered older? I know he's implemented your kernel into his ROM.
Click to expand...
Click to collapse
I don't even know, he will have to add lastest device tree commit.
aaronrw said:
Please elaborate on the 64 bits ...and thank you
Click to expand...
Click to collapse
You can check on GitHub, there is a message to explain why and what is changed.
New build is up! (ALIZE KERNEL - Potter)
*General changes:*
- Upstreamed to .81
- Switch for GENTLE_FAIR_SLEEPERS
- Check github for more
**Oreo (V142 Also support all new rom which have new binder commits (ask rom's dev))**
https://sourceforge.net/projects/alize/files/Oreo/Alize-8.x_v142.zip/download
I was excited to tryout this kernel on my LOS 15 setup, everything looks great, but sadly it disables the fingerprint navigation gestures (home/back/recents) , is there a way to enable it again?
lmgc1996 said:
I was excited to tryout this kernel on my LOS 15 setup, everything looks great, but sadly it disables the fingerprint navigation gestures (home/back/recents) , is there a way to enable it again?
Click to expand...
Click to collapse
No, because the latest build of LOS 15 doesn't have the newest gesture commits to make newer builds of alize work properly. Would have to use older builds of alize before the new gesture commits were added.
Can i overclock my g5 plus using this kernel?
Best regards
paulpaulbr said:
Can i overclock my g5 plus using this kernel?
Best regards
Click to expand...
Click to collapse
Not yet.
Hey man, loving your kernel! Any suggestions for the cpu governor?
nightwalkerx22 said:
Hey man, loving your kernel! Any suggestions for the cpu governor?
Click to expand...
Click to collapse
Impulse seems to be great for me.
matu20 said:
Impulse seems to be great for me.
Click to expand...
Click to collapse
Will give it a try. Thanks.
New build is up! (ALIZE KERNEL - Potter) [64BITS]
First release but already have:
- Lots of optimization
- ‎Fiops/Zen
- ‎Blu_active
- ‎Wakelock blocker
- ‎fsync switch
- ‎Sound control
- ‎Whitelist for gpu governor (avoid lots of rr)
- ‎... (GitHub)
Oreo(V20.1 - 64 bits)
https://sourceforge.net/projects/alize/files/Oreo/64bits/Alize-8.x_v20.1-64bit.zip/download
This works on pixel experience, right?
MAME Arcade said:
This works on pixel experience, right?
Click to expand...
Click to collapse
Yes the 32 bit version of Alize. Running both of them now
NEW BUILD IS UP !!!
**Oreo(V22 - 64 bits)**
https://sourceforge.net/projects/alize/files/Oreo/64bits/Alize-8.x_v22-64bit.zip/download
Changelog: https://github.com/Martichou/alize_potter/tree/alize-64bit
**Oreo(V22 - Built with UberTC and include wireguard support)
https://sourceforge.net/projects/alize/files/Oreo/64bits/Alize-8.x_v22-64bit_wireguard.zip/download
Changelog: https://github.com/Martichou/alize_potter/tree/alize-64bit_wireguard
**Oreo(V22R - 32 bits)**
https://sourceforge.net/projects/alize/files/Oreo/Alize-8.x_v22R.zip/download
Changelog: https://github.com/Martichou/alize_potter/tree/alize-8.x
Martichou said:
NEW BUILD IS UP !!!
**Oreo(V22 - 64 bits)**
https://sourceforge.net/projects/alize/files/Oreo/64bits/Alize-8.x_v22-64bit.zip/download
Changelog: https://github.com/Martichou/alize_potter/tree/alize-64bit
**Oreo(V22 - Built with UberTC and include wireguard support)
https://sourceforge.net/projects/alize/files/Oreo/64bits/Alize-8.x_v22-64bit_wireguard.zip/download
Changelog: https://github.com/Martichou/alize_potter/tree/alize-64bit_wireguard
**Oreo(V22R - 32 bits)**
https://sourceforge.net/projects/alize/files/Oreo/Alize-8.x_v22R.zip/download
Changelog: https://github.com/Martichou/alize_potter/tree/alize-8.x
Click to expand...
Click to collapse
So does the 32bit also have wireguard support?

[KERNEL][ARM64][OREO][PIE][15/03]EXTENDED KERNEL REV-25

EXTENDED LINEAGEOS/AOSP ARM64 KERNEL​
Code:
#include <std_disclaimer.h>
/*
* Your warranty is... Still valid??.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
WARNING: THIS KERNEL IS FOR LINEAGEOS/AOSP ROMS ARM64 BASED ONLY
This Kernel aims to use the best and most stable feautures of stock kernel by default and add useful features and optimizations,The idea is to keep it simple, stable and optimized!
The features Are :
Updated To Latest Motorola Kernel Sources (From Alberto97 repo)
Any Kernel Installer Script
Compiled With Latest Google GCC 4.9 & CLANG 8.0.4
ARM64 Optimizations
Update To Latest Linux 3.18.136
Update To Latest kernel.lnx.3.18.r34-rel (pie caf tag)
Added EAS SUPPORT
Added CPU_BOOST
Added Westwood TCP And Set By Default
CFQ I/O Scheduler Upstream Updates And Set By Default
Increased ZRAM size For All Variants
Memory Optimizations
Disabled Some Debugging
Added Sound Control
Added KCAL Color Control
Added K-Lapse Support
Added Backlight Dimmer
Removed additional SafetyNet flagsTo Pass SafetyNet
Misc Tweaks and Optimizations
DOWNLOAD​
-------------------------------------​
STANDARD OREO/PIE VERSION​
EXTENDED KERNEL REV-25 STANDARD​
-------------------------------------​
Use the app EXKM or kernel adiutor to tweak the kernel!
AFH FOLDER WITH ALL RELEASES​
XDA:DevDB Information
EXTENDED KERNEL ARM64 LINEAGEOS/AOSP, Kernel for the Moto G5 Plus
Contributors
attack11, sultanxda , franciscofranco , vache , flar2 , engs.tk , faiyaz
Source Code: https://github.com/attack11/android_kernel_motorola_msm8953
Kernel Special Features: KERNEL FOR LINEAGEOS/AOSP ARM64 BASED ROMS
Version Information
Status: Stable
Created 2017-11-24
Last Updated 2019-03-15​
Reserved
Reserved For Changelog
Hi all,Download link is in downloads section AFH is having issues,if people have issues downloading I will upload it to another host asap,Thanks!
Somehow i can't find sound control option in exkm, it was a clean flash btw
SafteyNet is not passing. Don't know if this is an issue with the rom regardless of the kernel. I'm on Los 15.
donjuro said:
SafteyNet is not passing. Don't know if this is an issue with the rom regardless of the kernel. I'm on Los 15.
Click to expand...
Click to collapse
If you're using the 64bit version then you cannot bypass the safetynet
CreasingMass Dev said:
Somehow i can't find sound control option in exkm, it was a clean flash btw
Click to expand...
Click to collapse
Thanks,I didnt enabled and didnt noticed,Will be there in next release ! :good:
donjuro said:
SafteyNet is not passing. Don't know if this is an issue with the rom regardless of the kernel. I'm on Los 15.
Click to expand...
Click to collapse
Yes its a know issue with 64 roms for now
# New Release is out (Sorry for the delay)
- Remove Cpu boost for now (msm_performance input boost works good)
- Compiled now with GCC 4.9 AARCH 64 Google Toolchain
- Optimizations for ARM 64
- Truly enabled sound control
- Memory & Sched Tweaks From Caf
- Incresed Zram Size for 2 gb devices
- Some other misc stuff...
Cheers!
attack11 said:
# New Release is out (Sorry for the delay)
- Remove Cpu boost for now (msm_performance input boost works good)
- Compiled now with GCC 4.9 AARCH 64 Google Toolchain
- Optimizations for ARM 64
- Truly enabled sound control
- Memory & Sched Tweaks From Caf
- Incresed Zram Size for 2 gb devices
- Some other misc stuff...
Cheers!
Click to expand...
Click to collapse
Thanks for the update, does this work with 8.1.0 roms?
CreasingMass Dev said:
Thanks for the update, does this work with 8.1.0 roms?
Click to expand...
Click to collapse
Yes,works in 8.0 and 8.1 roms :good:
# New Update is Up!
- Update To Latest Los 15.1 Sources
- Wireguard Support
- Some other misc stuff...
attack11 said:
# New Update is Up!
- Update To Latest Los 15.1 Sources
- Some other misc stuff...
Click to expand...
Click to collapse
Are you adding eas?
Edit: not trying to sound ungrateful man I'm sorry
zeft64 said:
Are you adding eas?
Edit: not trying to sound ungrateful man I'm sorry
Click to expand...
Click to collapse
Nope,I want to stay close to stock
Hi, I'm new to this, it works for the rom Pixel experience 8.1.0? Thank you!
AugusTroll said:
Hi, I'm new to this, it works for the rom Pixel experience 8.1.0? Thank you!
Click to expand...
Click to collapse
Yes.
jasondutch said:
Yes.
Click to expand...
Click to collapse
I tried to install it but when I start the device it stays in the bootlogo and it does not happen that way, is it possible that it takes so long? Thanks for answering!!
Bootloop on latest ROM.
....
AugusTroll said:
I tried to install it but when I start the device it stays in the bootlogo and it does not happen that way, is it possible that it takes so long? Thanks for answering!!
Click to expand...
Click to collapse
king.ska said:
Bootloop on latest ROM.
Click to expand...
Click to collapse
panamera2011 said:
....
Click to expand...
Click to collapse
Sorry guys, I need to update this, I will make an update in a couple of days
# New Update is Up!
- Update To Latest Los 15.1 Sources
- Updated Kernel Installer and Tweaks
- Compiled Using Clang 6.0.1
- Updated from the scratch, Removed useless stuff...
- Some other misc stuff...
Cheers!

[KERNEL][OREO][64BIT]ALIZE-KERNEL[27/01][CEDRIC]

ALIZE KERNEL FOR OREO​
/*
* Your warranty is... Still valid??.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
WON'T WORK ON 32BIT BASED ROM
OTHER ALIZE KERNELS ALIZE KERNEL FOR POTTER :good:
Introduction:
The main objective of the kernel is to give to any user, a kernel with some tweaks like new CPU govenor focused on battery, performance and both of them, I/O scheduler, ...
Click to expand...
Click to collapse
Features:
Boeffla Wl Blocker
Maple I/O sched
Frandom for random number
Wakeup boosted (time in milliseconds instead of seconds)
CRC check disabled (Performance boosted)
Vibration control
Sound control
Kcal support
Backlight dimmer
Fsync support on and off switch
Safetynet patch
Wireguard support
All features of sohams kernel
Underclock and Fixed BCL hotplug
Many other tweaks (check github)
Click to expand...
Click to collapse
Download (ARM64)
**Oreo(V4 - 64 bits)**
Download: Click Here
Changelog: Latest Commits
Click to expand...
Click to collapse
How to flash:
1. Download Alize for Cedric
2. Reboot to recovery
3. Flash kernel's zip
4. Reboot and tweak with proper app (Kernel auditor, Ex kernel manager, ...)
Click to expand...
Click to collapse
TELEGRAM GROUP:
https://t.me/joinchat/EWMwLkNn0rIRNNctA75U3A
Credits:
Lineage Team
Soham - For source and Oreo, and so many things)
@Martichou - Alize Owner and developer
XDA:DevDB Information
alize kernel for cedric, Kernel for the Moto G5
Contributors
infixremix, Martichou
Source Code: https://github.com/AlizeKernel/alize_cedric
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: vFour
Created 2017-12-30
Last Updated 2018-01-27
Tested and it's working. Thank you.
Thread Reopened Bring On ALIZE !
Alize - vTwo! (64bits Oreo only!)
What's new?
- Zen, Fiops & Sioplus iosched
- Blu_active cpu governor
- iosched switcher for better idle
- ‎check GitHub for more..
vTwo 64Bits
https://sourceforge.net/projects/alize/files/Cedric/Alize-8.x_vTwo-64bit_CEDRIC.zip/download
Cheers to @Martichou
delet this
zefyx said:
delet this
Click to expand...
Click to collapse
What you tryna say ?
infixremix said:
Alize - vTwo! (64bits Oreo only!)
What's new?
- Zen, Fiops & Sioplus iosched
- Blu_active cpu governor
- iosched switcher for better idle
- ‎check GitHub for more..
vTwo 64Bits
https://sourceforge.net/projects/alize/files/Cedric/Alize-8.x_vTwo-64bit_CEDRIC.zip/download
Cheers to @Martichou
Click to expand...
Click to collapse
Kernel is working fine, thank you.
DavidKirsch said:
Kernel is working fine, thank you.
Click to expand...
Click to collapse
Your welcome
Alize - vThree! (64bits Oreo only!)
What's new?
- Impulse,Elementalx,Alucard and blue_active Governors
- Updated Frandom
- iosched switcher updated
- ‎Sio Plus and zen Io Scheds added
vThree 64Bits
https://sourceforge.net/projects/alize/files/Cedric/Alize-8.x_vThree-64bit_CEDRIC.zip/download
Cheers to @Martichou
infixremix said:
Alize - vThree! (64bits Oreo only!)
What's new?
- Impulse,Elementalx,Alucard and blue_active Governors
- Updated Frandom
- iosched switcher updated
- ‎Sio Plus and zen Io Scheds added
vThree 64Bits
https://sourceforge.net/projects/alize/files/Cedric/Alize-8.x_vThree-64bit_CEDRIC.zip/download
Cheers to @Martichou
Click to expand...
Click to collapse
v3 is working fine too
DavidKirsch said:
v3 is working fine too
Click to expand...
Click to collapse
Good to here it
Alize - Cedric - vFour! (64bits Oreo only! )ENFORCING ONLY
What's new?
- Linux 3.18.92 (lastest)
- Update boeffla . WakeLocks Blocked By default
- ‎No useless features.
- ‎Selinux Enforcing
/!\ WARNING /!\
Your rom must be updated with lastest commits (Enforcing)
If you're not sure, ask the rom developer. They should add it for every upcoming build. (All builds from 27/01 at the moment only aex) Happy flashing!
https://sourceforge.net/projects/al...nly/Alize-8.x_vFour-64bit_CEDRIC.zip/download
There is a bug that when I play in the music and I lock the screen the cell phone starts the fiber and it blinks the screen.
Sorry, my english is using google translator
BatatinhaDoce said:
There is a bug that when I play in the music and I lock the screen the cell phone starts the fiber and it blinks the screen.
Sorry, my english is using google translator
Click to expand...
Click to collapse
Not my issue , I don't think my kernel could cause that
The bug I reported was wrong the bug is from the rom I'm using, sorry for my mistake.
Alize - CEDRIC - vFive! (64bits Oreo only!)
What's new?
- CPU boost Tweaks
- ‎Added Adreno idler
- ‎Interactive Optimisation
- Upstreamed to .93
- Fixed some memory leaks
Link :
https://www.androidfilehost.com/?w=files&flid=246581
geekbenk
Hello I try this kernel on moto g5 with crdroid 8.1 android gapps 8.1 arm64 and work well but geekbenk is lowered than the stock..why?? Thanks
infixremix said:
Alize - CEDRIC - vFive! (64bits Oreo only!)
What's new?
- CPU boost Tweaks
- ‎Added Adreno idler
- ‎Interactive Optimisation
- Upstreamed to .93
- Fixed some memory leaks
Link :
https://www.androidfilehost.com/?w=files&flid=246581
Click to expand...
Click to collapse
vFive causes boot loop for me with Lineage 64bit last version. I do have magisk and xposed.
DavidKirsch said:
vFive causes boot loop for me with Lineage 64bit last version. I do have magisk and xposed.
Click to expand...
Click to collapse
Hi sorry about this I should have mentioned , it only boots on aex and any roms that are Selinux enforcing . It does work on some permissive roms but only the latest builds ! Thanks in advance
A simple question, I made the same request in the LineageOs trend 15.1 and I repeat it here too. I do not know if the kernel can in any way affect the quality of the calls, if so please check the phone part because the audio in call is really bad on all the buildings here on the forum from the first LineageOs on then thanks .
Inviato dal mio Moto G (5) utilizzando Tapatalk

[KERNEL][Oreo/Pie/10] Fz Kernel

Code:
#include <std_disclaimer.h>
/*
* Your warranty is... still valid?
*
* I am not responsible for bricked devices,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this Kernel
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
NOTE »
Fz Kernel
Only for 8.1, 9.0 & 10.0 ROMs.​
ABOUT​This kernel was made using the current LineageOS kernel source as base and merged all the necessary changes to work on Android 10 (Ten). On top of it I then added some features for it to be customized by each user if they do want to.
Feature list
Replaced Qualcomm cpu-boost with Sultanxda cpu_input_boost driver.
Replaced Qualcomm MPDecision with NVIDIA CPUQuiet driver from Tegra CPUs.
Charging current customization Interface.
Voltage control for undervolting.
KCAL Color Control support.
Simplified Thermal driver.
Franco's Wakelock blocker.
Franco's Sound Control.
Franco's Backport of POWER_EFFICIENT workqueues.
Enabled Multicore power saving.
A LOT of under-the-hood optimization changes from Sultan, Franco, Boeffla, arter97 and many others.
Fixes USB MTP without enabling USB Debugging.
Fixes Data Saver.
Smooth default kernel behavior using ZaneZam's zzmoove governor with ZZ Battery Plus profile.
Custom Governors:
Alucard
Impulse
Intelliactive
Intellimm
Lionheart
Smartmax
zzmoove
Custom Hotplugs:
MSM Hotplug
AutoSMP Hotplug
CPUQuiet
Custom I/O Schedulers:
FIOPS Scheduler
SIO Scheduler
TripNdroid Scheduler
zen Scheduler
DOWNLOAD HERE​
OTA Updates
Going forward, kernel OTA updates will now be handled via Franco's Kernel Manager app. Users may import the following URL in FKM Flasher to receive updates:
https://raw.githubusercontent.com/Feinzer/fz_kernel_data/master/ota/release.json
Thanks to
CyanogenMod / LineageOS
Ak
Nikhil18
DeadlyIndian
ArtxDev
Sultanxda
franciscofranco
ZaneZam
Lord Boeffla
flar2
Adithya R.
Tomoms
Idprophecy
All of this is possible ONLY because of the work of these people and teams. Thank you.
XDA:DevDB Information
Fz Kernel, Kernel for the OnePlus One
Contributors
Feinzer, LineageOS, AK, Nikhil18, DeadlyIndian, ArtxDev, Sultanxda, franciscofranco, Lord Boeffla, ZaneZam, flar2, Adithya R., ab123321, Tomoms, Idprophecy
Source Code: https://github.com/Feinzer/fz_kernel_oneplus_msm8974
Kernel Special Features:
Version Information
Status: Stable
Created 2019-05-23
Last Updated 2020-01-15
Reserved
Changelog:
Fz v4.3:
Removed CPUQuiet Hotplug driver.
Added Intelli Hotplug driver.
Updated installer zip to anykernel3.
Added FKM OTA Support
Fz v4.2:
Added ZRAM (Disabled by default)
Removed Maple I/O Scheduler due to reboots caused by it.
Back to good ol' zzmoove default setup.
Fz v4.1:
Added back features and optimizations lost in the LineageOS rebase process.
Added some new settings on init to actually use the features this kernel has.
Fz v4:
Complete rebase to bacon's current LineageOS kernel.
Initial release for Android 10.
Fz v3.1 HOTFIX:
Fixed bootloop on ROMs built with AOSP/POSP trees.
Fz v3:
Added NVIDIA's CPUQuiet driver.
Disabled mpdecision by default.
Added Dynamic Interactive governor.
Added ElementalX governor.
Added Maple I/O Scheduler.
Added general optimizations and improvements.
Reserved
I'll give a try.
Currently over LOS 16 20190523 + magisk 19.2 no issue after flashing.
I'll try common things on few days:
1. Gps UNTESTED
2. Bluetooth OK (test with 2 bluetooth headphone and 1 bluetooth sound speaker)
3. Wifi hotspot OK (unlike FC kernel r57)
4. Battery life UNTESTED
5. More?
Been using it for weeks. It's good. Definitely worth trying.
Using it with TugaPower and I'm very satisfied. [emoji106] for good work.
Sent from my A0001 using Tapatalk
This kernel work great on TugaPower P18. Thank you for your great work. All the best.
Sent from my OnePlus One using XDA Labs
Is there any changelog?
kakawait said:
Is there any changelog?
Click to expand...
Click to collapse
Yes, there is but I don't really wanna edit the OP every time I release a new version unless there are like, nice big changes to edit the feature list, I might post changelogs once I drop a new version on the reserved posts or something.
Yo Feinzer! i see your bacon is still alive...
i can't really use telegram rn that's why I've been missing , been trying to revive my damn phone...
(figure out who i am , isn't that hard )
Edit: Glad to see you doing some work hehe
Initial impression of this kernel seems good. The phone is a bit more responsive now.
Using official lineage OS 16.
doesn't work on POSP v2.2 - bacon
meiax93 said:
This kernel work great on TugaPower P18. Thank you for your great work. All the best.
Sent from my OnePlus One using XDA Labs
Click to expand...
Click to collapse
What settings you use on hotplug?
Enviado do meu A0001 através do Tapatalk
VitorMSA said:
What settings you use on hotplug?
Enviado do meu A0001 através do Tapatalk
Click to expand...
Click to collapse
i just flash that kernel and forget. i not tweak any settings. xD
Does.'t boot on AOSP rom also
portfolio said:
Does.'t boot on AOSP rom also
Click to expand...
Click to collapse
You aren't giving details about the problem, which ROM are you using? any mods or something?
RenzozO said:
doesn't work on POSP v2.2 - bacon
Click to expand...
Click to collapse
portfolio said:
Does.'t boot on AOSP rom also
Click to expand...
Click to collapse
This issue has been fixed now with the v3.1 release.
Next time tho, try to tell me more information about the situation because I cannot address an issue that I have no information of, thank you
yes, v3. 1 is booting now with arrowOS, thanks!
Is this kernel support zram with lz4?
Or will it be supported?
SoarStarlight said:
Is this kernel support zram with lz4?
Or will it be supported?
Click to expand...
Click to collapse
Will look into it
Edit: nvm it does, I forgot about it.

[KERNEL] DxT [10&11] [HMP]

DxT Kernel ​
* Your warranty is now void.
* I am not responsible for bricked devices, strained relationships,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this kernel
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
"This is a user friendly thread, all your suggestions are important to us and will be taken into consideration.."
This kernel is only for Payton
Features
1. Built with Clang 13 + Polly optimize
2. Merge Linux kernel and driver as soon as possible
3. DxT is CAF based and uptodate with latest tag
4. Fixed all compile-time warnings
Other Features
1. kcal, sound gain control
2. CPU OC using some sdm660 frequencies ,[Little cores = 2.0ghz ,Big cores = 2.5ghz]
3. Added & Updated LZ4 for ZRAM (Enabled by Default)
4. AnyKernel3 Installer Script
5.Compiled With Latest Proton CLANG 12
6. Exfat driver comes from arter97
7. Available I/O scheduler: bfq, cfq(default), deadline
8. Available TCP congestion algorithm: westwood(default)
9. Merge some optimization commits from Sultan
10. Kernel-level cpusets parameter optimization, optimize CPU core calls
11. Latest Wireguard driver
12. Adreno GPU boost
13. Some other visible and invisible optimizations...
Due to different moto action implementation on different roms i made two versions
* normal version support roms like superior,pixel experience,msm-xtended,ancient
* L version support roms like LOS,crdroid,havoc,derpest
DOWNLOAD
DxT v4.2
DxT v4.2-L
DxT UC
OTA SUPPORT:
# DxT Kernel FKM Manager Support
This kernel has FKM Manager support for autoflash updates directly from the app.For this to work you must import the configuration link in the section "Flasher" of the app:
Then you must select the option: "Import a kernel download configuration"
This are the URLs for the two versions,just copy,paste and save. (You must add and save one first and if you want both versions available add the other after)
DxT = https://raw.githubusercontent.com/DhineshCool/Dxt_downloads/new/dxt.json
DxT-L = https://raw.githubusercontent.com/DhineshCool/Dxt_downloads/new/dxt-L.json
Telegram Group
Use the app EXKM, FK Manager, kernel adiutor or smartpack to tweak the kernel!
special thanks to all contributators
attack11, nathanchance , joshuous , akhilnarang , flar2 , kerneltoast , GuaiYiHu , Pzqqt
if u like my works u can donate
[email protected] - upi
https://www.paypal.me/cool585 -paypal
XDA:DevDB Information
DxT kernel, Kernel for the Moto X4
Contributors
dhinesh_cool
Source Code: https://github.com/DhineshCool/Dxt_payton
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: v4.2
Created 2020-06-22
Last Updated 2021-07-25
## DxT Changelogs ##
v4.2
*upstreamed to v4.276
*merged latest caf tags
*latest proton clang
*improved cpu frequency
*clean up rarely working freq
*improved cpu idle
*fixed battery drain on idle
*removed prlmk to prevent twrp crash
*more code cleanup fro stability
V4.1
*Fixed battery drain issue
*Fixed some bugs
v4.0
*upstreamed to v4.270
*latest proton clang
*fully rebase
*rework thermal engine
*rework ram-managment
*lot see my git
ota json has been changed
DxT = https://raw.githubusercontent.com/DhineshCool/Dxt_downloads/new/dxt.json
DxT-L = https://raw.githubusercontent.com/DhineshCool/Dxt_downloads/new/dxt-L.json
v3.6
*upstreamed to v4.258
*latest proton clang
*added anxiety io for faster app opening
*added z3fold from sony
*improved zram performance
*updated ashmem
*fixed some thermal sensor spamming on logcat
*more fixes see my git
v3.5
*upstreamed to v4.253
*Merged tag LA.UM.9.2.r1-02000-SDMxx0.0
*latest proton clang
*Backport new vmalloc for "large performance benefits"
*selinux: Allow audit to be disabled
* page_alloc: double zone's batchsize
*nuke more debloat
*more optimation for better smoothness
now ui will be more smooth
*Updated wireguard to "1.0.20210124"
v3.4
*DxT rebased to caf base
*upstreamed to v4.251
*added persist bug fix
*latest proton clang
*Gpu added 710 freq
*more ion fixes from sultan
*Enable CONFIG_HID_NINTENDO
*Updated wireguard to "1.0.20201221"
v3.3
New Year Release
*upstreamed to v4.248
*latest proton clang
*Gpu oc to 800mhz
*no thermal throttling on gpu
*more ion fixes from sultan
*Updated wireguard to "1.0.20201221"
note uc version pushes to bimonthly release
v3.2
*upstreamed to v4.247
*fix payload calculation
*usb: Add Drivedroid Support
*power: msm-core: Fix mutex not getting unlocked in error path
*cpufreq: stats: optimize proc files
*mm: speed up mremap by 20x on large regions
*work on cpu idle
*lot of work done see my git
(https://github.com/DhineshCool/Dxt_payton)
*latest proton clang
**** rework on uc version -it now fully stable no thermal throttling ****
*for the people on xda i released v3.1 on my telegram group , i forget to update on xda
that why directly releasing v3.2
v3.1
*upstream to v4.244
v3.0
*upstreamed to v4.240
*clean up codes
*fixed build warning
*added additional safetynet patch
*rework on thermals
*work on cpu idle
*work on ram managment
*lot of work done see my git
(https://github.com/DhineshCool/Dxt_payton)
*latest proton clan
v2.8
*upstreamed to v4.239
*power: bcl: Improve power efficiency of the workqueue
*used latest proton clang (20201010)
v2.7
*upstreamed to v4.238
*qcacld-3.0: Disable Wifi SAE by default
*optimizations for block
*used latest proton clang (20200930)
v2.6
*upstreamed to v4.237
*New OC for payton (thnx to seba3567)
*Remove some scheduler
*ipc logging disabled
*changes on debugfs
*increase thermal trip points
*optimize gpu
*used latest proton clang (20200923)
Reserved
Much appreciated! I've been wanting a custom kernel for Moto x4!
Running on HavocOS 3.6, seemingly no issues. Definitely feels snappier than the base kernel. Will update after a couple days use.
Thanks again!
Installation instructions?
Zohaibzx said:
Installation instructions?
Click to expand...
Click to collapse
Method 1: Download and install the zip for your rom from the download links, then flash in twrp
Method 2: Use Franco Kernel Manager (requires root) and configure it to use the proper link listed under OTA support. FKM will read any new releases in Dhinesh's github, and update the kernel without a need to flash in recovery.
Hope that helps!
I tried to flash it in twrp but after flashing the phone just reboots to recovery instead of system. I'm using pixel experience and have used the proper variant of your kernel.
I've tried to flash this (Using FKM Manager), to both of my X4's, one is running Havoc 9, and one is running the latest version of Havoc 10.
Both gave the same error message: "Unsupported device. Aborting..."
Flashed using fkm in pixel rom. No issues
Is there anyway to increase the minimum cpu frequency? Whenever i do with fkm it goes back to 300mhz. 300mhz seems too low causing some stuttering while scrolling and in some system animations
helo123 said:
Is there anyway to increase the minimum cpu frequency? Whenever i do with fkm it goes back to 300mhz. 300mhz seems too low causing some stuttering while scrolling and in some system animations
Click to expand...
Click to collapse
U can manually set minimum freq
Zohaibzx said:
I tried to flash it in twrp but after flashing the phone just reboots to recovery instead of system. I'm using pixel experience and have used the proper variant of your kernel.
Click to expand...
Click to collapse
Some people had this issue on pe
I don't know why this happening I will try to fix
Tell your variant with ram
dhinesh_cool said:
U can manually set minimum freq
Click to expand...
Click to collapse
I tried many apps to change minimum frequency. It still goes back to 300.. only i can change the maximum frequency now
RBJ26 said:
I've tried to flash this (Using FKM Manager), to both of my X4's, one is running Havoc 9, and one is running the latest version of Havoc 10.
Both gave the same error message: "Unsupported device. Aborting..."
Click to expand...
Click to collapse
U need clean flash latest havoc then install
helo123 said:
I tried many apps to change minimum frequency. It still goes back to 300.. only i can change the maximum frequency now
Click to expand...
Click to collapse
Weird I will check ,but lag is due to ram management
I added some tweaks for ram management that was causing lag after sometime for 3gb variant I was aware of this issue I will fix soon
dhinesh_cool said:
Some people had this issue on pe
I don't know why this happening I will try to fix
Tell your variant with ram
Click to expand...
Click to collapse
1900-7 Dual Sim 3GB 32GB
dhinesh_cool said:
U need clean flash latest havoc then install
Click to expand...
Click to collapse
Sorry, I should have given more info.
I should have said I had two clean installs of Havoc. On one phone is with Havoc 2.7 (which you say is not supported - OK).
The other phone is a clean install of Havoc 3.6
I have not tried to flash through TWRP would this help? or could there be another issue with my phone.
ETA: I think I understand now. Do you mean without root, etc?
Thanks,
R
RBJ26 said:
Sorry, I should have given more info.
I should have said I had two clean installs of Havoc. On one phone is with Havoc 2.7 (which you say is not supported - OK).
The other phone is a clean install of Havoc 3.6
I have not tried to flash through TWRP would this help? or could there be another issue with my phone.
ETA: I think I understand now. Do you mean without root, etc?
Thanks,
R
Click to expand...
Click to collapse
Flash through twrp
Or u need root to flash via fk manager
dhinesh_cool said:
Flash through twrp
Or u need root to flash via fk manager
Click to expand...
Click to collapse
Flashing via TWRP worked fine, Thanks!
For some reason flashing from FKM would not work, even with root.
RBJ26 said:
Flashing via TWRP worked fine, Thanks!
For some reason flashing from FKM would not work, even with root.
Click to expand...
Click to collapse
On FKM u need to give proper permission to storage then on flasher u need select storage and give access

Categories

Resources