Mic not working while making making calls - Xiaomi Poco F1 Questions & Answers

I am using the Akg earphones come with the Samsung galaxy s9.
Earphones working perfectly for listening music and for watching YouTube videos but while making calls with Poco f1 (both MIUI ROM & Pixel experience custom ROM) the other person not able to hear my voice .
I tried the same earphones with different mobiles everything is working fine like music and even calls and vice versa (other earphones are working fine with Poco F1)
Please suggest how to fix this if possible .

ramana518 said:
I am using the Akg earphones come with the Samsung galaxy s9.
Earphones working perfectly for listening music and for watching YouTube videos but while making calls with Poco f1 (both MIUI ROM & Pixel experience custom ROM) the other person not able to hear my voice .
I tried the same earphones with different mobiles everything is working fine like music and even calls and vice versa (other earphones are working fine with Poco F1)
Please suggest how to fix this if possible .
Click to expand...
Click to collapse
Since mike is your problem, you have to test the earphones with apps using the mike, not YouTube and music apps. With these, you only listen through the earpiece and not talk through the mike.
Apart from calls, what other apps did you check them on? Probably the port on the phone is clogged with dust/dirt. Try cleaning it.

tnsmani said:
Since mike is your problem, you have to test the earphones with apps using the mike, not YouTube and music apps. With these, you only listen through the earpiece and not talk through the mike.
Apart from calls, what other apps did you check them on? Probably the port on the phone is clogged with dust/dirt. Try cleaning it.
Click to expand...
Click to collapse
Good day,
I have the same issue and can only confirm that this is phone not earpieces.I have tested three of my headsets- both wire and bluetooth- and the mike does not function on poco whilst other devices support it just fine.I haven't been able to solve it by rebooting device also .Neither the update to MIUI 10.2.2.0 has changed the situation.
Отправлено с моего POCO F1 через Tapatalk

Any update on this issue, Did anyone find solution??
I am also facing same issue. I am on PE ROM. I've tried changing vendor firmware but no luck.
I've tested with AKG and iPhone earpods, mic not working in both.
Has anyone tested with mi earphones on miui rom? Is this a hardware issue?

AKG Earphone Mic not working with my Poco F1
I do face the same issue with my AKG headset mic like many of the users has been facing awhile with Poco F1. I hav not able to find a solution or a fix for this yet. Speakers are working perfectly but mic is not. Headset and Mic work perfectly with my other devices like Samsung Note 8 and Huawei device.

I don't know why but I'm somewhat sure that you need this type of adapter which comes with sennheiser cx275s. It's a special type of adapter. If you guys google about it, you'll find the exact reason why some headphones work differently. I have gone through two pairs of these headsets and have experienced this.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Related

WM6.1 Bluetooth Issues

Hi,
We now have 3 startreks in the house all of which are running erofich's WM6.1, and all have the same bluetooth problem.
It will pair and connect to a handsfree device - both a headset and a tomtom, and both display as 'handsfree' devices in the settings. When a call comes through it rings in the headset to alert you to the call, but when you press answer, it disconnects the bluetooth headset and disables the bluetooth, and leaves the call coming through the phone instead and still connected.
Does anyone have any experience of this, is it a known WM6.1 bug or is it something we've done to it?
I thought it was just me.... I had it happen to me with two different headsets, although instead of just disconnecting, the phone would lock up. Went back to 6.0 which seems to be fine.
Hi,
you are not alone. I have the same problems with my hands-free car kit. If there is an incoming call the telephone just disconnect the Blutetooth connection. Iam running WM 6.1 Pro. Is there anybody with a solution?
cheers for replies, at least its not just me and its not just the WM6.1 standard but the pro as well.
I dont have any problems with bluetooth.
However im running my own modded ROM based on Gnats 6.1 clean ROM.
His version has no bluetooth problems.
I should say none that I know of.
When a call comes through it rings in the headset to alert you to the call, but when you press answer, it disconnects the bluetooth headset and disables the bluetooth, and leaves the call coming through the phone instead and still connected.
Click to expand...
Click to collapse
Tim, you are not alone...Me too
I have exactly the same problem...
It's strange....
It seems to be a problem with Erofich's version of it - i swapped over to Gnats 6.1 and it works fine now.
Probably should be added to the known bugs list.
im using wm6.1 pro and it works great! even has the thumbnail on the smaller LCD!
when i hit ans on the BT headset, audio goes to headset
when i flip open the phone, audio goes to phone
GnatGoSplat rom solve my problem..
When a call comes through it rings in the headset to alert you to the call, but when you press answer, it disconnects the bluetooth headset and disables the bluetooth, and leaves the call coming through the phone instead and still connected.
Click to expand...
Click to collapse
Now, All work fine!
Till I have flash my phone by GnatGoSplat rom.
The problem was gone...
PS: I have two Handset ( One Motorola and the other one China Ibox)
In the Erofich rom, the motorola handset work fine and the Ibox leaves the call coming through the phone instead and still connected.
And now, with GnatGoSplat rom, they work fine...
Baffled why Bluetooth is not working for some
I have Erofich's 6.1 Standard, and the Motorola S9 stereo headset, and it works AWESOME! My music cuts outs sometimes for a nanosecond, but it did with the regular one year bluetooth earpiece on the Cingular factory ROM as well. I am not sure what other programs you have installed that may be conflicting with the Bluetooth.
Just to try and see if we are experiencing the same issue, maybe not.....
(HTC Hermes thread)
http://forum.xda-developers.com/showthread.php?t=396314
"differences between 6.0 and 6.1 pairing process"
Where do I find gnatgosplat's latest WM6.1 ROM?
In his thread there are only 3 WM6.0 roms.. there's a note saying that WM6.1 has been removed and put in its own thread, but I can't find it!
Bluetooth on erofich's room is flaky, but I like the WM6.1 sliding panels...
Handsfree problems
I'm having this same problem with my Dock n Talk station. Using GnatGoSplat's Clean 6.1 ROM, it pairs with the DNT and I can dial out (which means there is a connection because I am dialing from my cordless home phone connected to the DNT), but as soon as the call connects, the call switches to the cell and drops the handsfree (and Menu/Switch to handsfree has no effect). I had the same problem with Erofich's 6.1 ROM and tried Gnat's per the above suggestions, but there's no change.
I also have a Plantronics headset which works properly.
Any ideas? I'll try going to a 6.0 ROM tomorrow and see if that fixes it.
Following up...
czpdx said:
I'm having this same problem with my Dock n Talk station.
Click to expand...
Click to collapse
After trying multiple versions of 6 and 6.1 ROMs, I found that none of them work with my DNT - I reverted back to the original WM5 ROM (Cingular 3125) and it works fine again. From looking at other boards, it's possible that a firmware update to the DNT might fix it, but I wonder what's so different about how WM6 handles bluetooth handsfree devices.
Has anybody had any luck in pairing a Motorola S9 BT headset with HTC StarTrek?
I've tried with Erofich's standard and pro roms, as well as with Pampooch's one (btw xcelent home screen, liked it very much).
No luck. Either the phone detects the headset, but doesn't want to pair with it, or, more often, doesn't want to find any devices at all (like the BT interface hanged r stopped responding).
It's my sis phone.
Help or I'll die
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hi, I'm currently running Erofich's PRO V2, and I have no bluetooth issues. But every rom I tried before that, including V9c and V7b, I could beam, but not recieve files via bluetooth. I'm waiting for it to be fixed, then I can switch back to std versions.
Solution?
See if this helps. http://rapidshare.com/files/260467849/STAR100_WM61v9c.zip.html, or the full rom- http://rapidshare.com/files/260467849/STAR100_WM61v9c.zip.html.It's the OS.nb file from Erofich's v9c, but I replaced the bluetooth files with the ones from GnatGoSplat's 6.1 ROM. I can't test it because I have no other device at hand. I apologise in advance if it doesn't work. Please add a mirror if it does though, It can only be downloaded ten times.

Bluetooth SBC bitpool 35 on H850 V20b resulting bad audio quality

Hi, people of internet! Here some research, to prove that im not gone mad or having a nocebo effect, since I was very disappointed in bt audio quality of h850 running 7.0 (V20b) compared to lg g2 running cm13. The regression that I didn't expect.
So, even without root on g5, in the devel options we can enable bt log dump:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
1. Dasable bluetooth.
2. Turn logging on.
3. Enable bluetooth and connect a device.
4. Play your lovely tunes in any audio player for ~5 seconds.
5. Disable bluetooth, turn off logging.
The log file named btsnoop_hci.log will appear on /sdcard.
Delete or rename this file every test.
Do not forget to turn the logging option off, otherwise it will flood your storage.
And analyze these files in Wireshark:
Lets compare the two. The testing device is JBL Reflect bt mini (also tested with Plantronics M70 with same result).
LG G2, requesting capabilities of device (useful to check which codec(s) your device supports)
And getting reply that only SBC (not aptx, mp3 or aac, we are talking sbc only here) codec is supported, giving the command to use it with bitpool (quality) from 2 to 53, as reported.
Later in the log we see actual sbc packets transmitted, each carrying music itself, so to say, at maximum bitpool of 53. Also note the packet size.
And the music sounds good, well, for sbc at least.
Now lets look at LG G5
Results are, negotiating quality and settings with the device, is same, but when we take a single sbc packet.. Actual sbc bitpool is 35.
Why, LG? So, if you guys test it for yourself and report back here, it would be great.
To me it looks like an android bug, maybe closed long time ago in the mainstream and lg was just unlucky to snapshot it. Dunno.
Further actions may be waiting for 7.1 or rooting and trying to find if bitpool 35 is indeed hardcoded and where.
Update: Well, frack me sideways. Problem fixed itself by hard resetting again (3rd time for the phone) and then re-pairing headphones. Go figure. Thank you for your attention.
Similar behavior
Greetings from late 2018. I am seeing similar behavior. My G5 drops from bitpool of 53 to 25. In my case, this happens whenever there is BLE advertising which happens every 15 seconds or so for about 10 seconds. This makes listening to audio sources that only support sbc unlistenable. This started happening about a year after I bought it so I am thinking that an update broke it.
I'll probably try what you did (hard resets) and see what happens.
If you or anyone have a suggestion, please let me know.
Thanks!
TRANKA2010 said:
Greetings from late 2018. I am seeing similar behavior. My G5 drops from bitpool of 53 to 25. In my case, this happens whenever there is BLE advertising which happens every 15 seconds or so for about 10 seconds. This makes listening to audio sources that only support sbc unlistenable. This started happening about a year after I bought it so I am thinking that an update broke it.
I'll probably try what you did (hard resets) and see what happens.
If you or anyone have a suggestion, please let me know.
Thanks!
Click to expand...
Click to collapse
Yes, that..
Since then, bt was behaving well.
I would suggest also resetting network settings (found in "Backup & Reset") without a full system reset, then pairing BLE and regular bt devices in some order or another, like good old "jiggle the handle" method untill its working :b
For me, I have a pocophone f1 now running a custom rom (Sybiria) which includes so called SBC HD, (take a look at this commit for explaination review.lineageos.org/c/LineageOS/android_system_bt/+/229125 ) tl;dr aptx-like quality on nearly any sbc device.

Audio switches from Bluetooth to loudspeaker

This happens to me all the time now:
- I turn my Bluetooth headphones on and listen to something
- About 5-10 minutes later, audio goes out on the headphones and it plays through the loudspeaker
- Bluetooth does not disconnect, I can still use the remote of the bluetooth headset to start and stop music, but if I stop and start music with the headset remote, it still plays through loudspeaker
- Firmware is BLA-L29 C432 129
- Happens with Spotify aswell as with the stock Music player
- Restarting Bluetooth temporarily fixes the problem, until it starts to happen again after 5-10mins
- Tried two different bluetooth headphones (Teufel Move BT, Jaybird X3)
I had this occasionally happen on the firmware I had before (127) aswell.
tr1cky1 said:
This happens to me all the time now:
- I turn my Bluetooth headphones on and listen to something
- About 5-10 minutes later, audio goes out on the headphones and it plays through the loudspeaker
- Bluetooth does not disconnect, I can still use the remote of the bluetooth headset to start and stop music, but if I stop and start music with the headset remote, it still plays through loudspeaker
- Firmware is BLA-L29 C432 129
- Happens with Spotify aswell as with the stock Music player
- Restarting Bluetooth temporarily fixes the problem, until it starts to happen again after 5-10mins
- Tried two different bluetooth headphones (Teufel Move BT, Jaybird X3)
I had this occasionally happen on the firmware I had before (127) aswell.
Click to expand...
Click to collapse
I'm on firmware 127-C432 and used a Jabra Bluetooth headset with Spotify or pi music player without problem.
I was now able to record logs when this happened.
I attached the log file.
Any developers able to see what the problem is?
Ah, file didn't upload.
Here are the logs.
Had same problem, but it stopped after removing nova launcher.
Sendt fra min BLA-L29 med Tapatalk
Did you find a solution?
bufordtjustice said:
Had same problem, but it stopped after removing nova launcher.
Sendt fra min BLA-L29 med Tapatalk
Click to expand...
Click to collapse
I use Nova Launcher aswell.
Going to see if removing it helps, I will also submit the logs to Nova Launcher, maybe they know what is going on.
I'm having the same issue. I'm on AL-ALP29 8.0.0.129 C185.
I'm using the stock launcher. Let me know if you find a solution!
Same problem stock launcher, bla l29 c432 127L... Annoying... Nearly as annoying as the low output volume...
So far, since removing nova launcher and doing another step, I noticed no more problems.
Yesterday I listened to audio for 2 hours without it going to loudspeaker.
What I also did was disable the wallpaper rotation on the lock screen.
You can do this by going to the lockscreen and then swiping up and hitting the pause button.
I only did this because I saw a lot of errors for timelivewallpaper in the logs which are now gone.
Here is a picture where you can find the option:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I don't have either of those things but I still had the problem... Some days, like today it can be fine and then on others it happens every 2 minutes!
zomby92 said:
I don't have either of those things but I still had the problem... Some days, like today it can be fine and then on others it happens every 2 minutes!
Click to expand...
Click to collapse
Unfortunately, shortly after posting this, I had the problem aswell.
Attached logs for this one aswell.
Maybe anyone who is also having this problem could provide logs aswell.
I record logs by using matlog: https://play.google.com/store/apps/details?id=com.pluscubed.matlog
If you have root you can give it permission to read logs, otherwise you can give it permission via adb, on the start of the app it shows instructions.
If the problem happens instantly go to matlog and press pause in the top, then go to File -> Save
matlog reads the system logs so the events before you started matlog are also recorded.
Oh, I also talked to Huawei and they basically told me to **** off because I'm running 8.0.0.129 which isn't signed yet.
I'm on holiday now but will try to provide some logs when I get back. Fingers crossed it might just be something they fix in 130.
any news on this? I have the exact same issue on a Mate 9 upgraded to Oreo (official)
Also has happened to me on L09(C782) - currently on Firmware 128.
I did have Nova installed, but it happened after uninstalling it. I'll try to record logs next time, but it seems to occur after a notification arrives (possibly related to how it plays the notification sound?) - which switches bluetooth audio to the speaker, even though the bluetooth device is still connected (play/pause work).
Disconnecting and reconnecting works, so my guess is that it's redirecting the audio incorrectly for notification and then not restoring it afterwards?
i had this problem today for the first time. disconnect/reconnect did the trick. stock launcher.

stuttering bluetooh connection

Hi there,
i got my new Elephone S8 and have a issue when i want to stream Youtube via Bluetooth to my headset.
It keeps sturring the whole time, but don't know why.
Maybe unstable bluetooth connectivity?
With my old smartphone Honor 7 i never had this issue!
Does anybody have the same issue or knows how to fix it?
I'm not a developer or something, but could the EngineerMode (*#*#3646633#*#*) solve that?
Thanks and regards!
Hmm, I use my S8 with a BT headset about 6-8 hours a day, mostly music and audio books, but a fair amount of YouTube as well, with no such problem.
The only issues I have had is if I was holding the phone in Landscape mode watching a video and my hand covered the upper back of the phone (where the cam lives). I suspect the radios are there and my hand was interfering with the reception/transmission of the BT radio.
If that's not it, and if it happens with different BT devices, might want to look into an exchange, you might have a defective phone.
map002 said:
If that's not it, and if it happens with different BT devices, might want to look into an exchange, you might have a defective phone.
Click to expand...
Click to collapse
yes, this happens with different BT devices, regardless if I stream music via Youtube or Spotify... its always stuttering.
Would be a shame if I have to send it back to Hong Kong (Gearbest) just because of the costs...
Anybody else has an idea?
Soulja00 said:
yes, this happens with different BT devices, regardless if I stream music via Youtube or Spotify... its always stuttering.
Would be a shame if I have to send it back to Hong Kong (Gearbest) just because of the costs...
Anybody else has an idea?
Click to expand...
Click to collapse
I have the same problem if my smartwatch is connected. Disconnect watch, start music or video, then reconnect my watch and all is fine.
Yeah, mine has started doing the same thing. I've had the phone for about 5 months. Rebooting the phone fixes it when it starts doing it.
So I have a different Bluetooth problem...
While I *can* connect an Anker Bluetooth receiver to make my wired headphones Bluetooth, I can't hear anything with pure Bluetooth headphones... When they connect and I start playing sound, it makes the phone lag and nothing comes out of the headphones apart from the occasional pop.
Anyone else with this problem and possibly know a fix? I've tried doing the whole "disconnect smartwatch, connect headphones, connect smartwatch" but it hasn't worked
If you just received this phone, it might be better to just return it. Full of defects and no support.
Did you try changing volume when it's connected to BT.
Make sure that output is set to BT.
Soulja00 said:
Hi there,
i got my new Elephone S8 and have a issue when i want to stream Youtube via Bluetooth to my headset.
It keeps sturring the whole time, but don't know why.
Maybe unstable bluetooth connectivity?
With my old smartphone Honor 7 i never had this issue!
Does anybody have the same issue or knows how to fix it?
I'm not a developer or something, but could the EngineerMode (*#*#3646633#*#*) solve that?
Thanks and regards!
Click to expand...
Click to collapse
I had the same problem. But after enabled "BT RX ADC Clock selection" it seems to work fine. Go to service mode *#*#3646633#*#* and then >Connectivity>Bluetooth>BT RX ADC Clock slelection> Turn on.
Sent from my S8 using Tapatalk
I couldn't find Bluetooth under connectivity - are you sure that's where it is?
Poke668 said:
I had the same problem. But after enabled "BT RX ADC Clock selection" it seems to work fine. Go to service mode *#*#3646633#*#* and then >Connectivity>Bluetooth>BT RX ADC Clock slelection> Turn on.
Sent from my S8 using Tapatalk
Click to expand...
Click to collapse
Plowmanx said:
I couldn't find Bluetooth under connectivity - are you sure that's where it is?
Click to expand...
Click to collapse
Its there. But you have to reset it evry time you restart the phone or turn off bluetooth.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my S8 using Tapatalk
Pseud O'Nym said:
I have the same problem if my smartwatch is connected. Disconnect watch, start music or video, then reconnect my watch and all is fine.
Click to expand...
Click to collapse
Have you tried:
- to complete close Smartwatch-App /
Music-App / YouTube/
- connect Bluetooth device
- start YouTube / Music / App ....
Poke668 said:
Its there. But you have to reset it evry time you restart the phone or turn off bluetooth.View attachment 4470132View attachment 4470133
Sent from my S8 using Tapatalk
Click to expand...
Click to collapse
DUDE I LOVE YOU, works for me, i using my elephone s8 now and work"s fine!!!
I had a problem with unstable BT connection aswell. Nothing worked for me from this forum and others. It can be update on some app or just some user installed app itself. I didn't check this solution on factory rom because I installed alternative rom months ago but, should work there aswell. I don't know which app it is, so my solution is radical: Factory reset + blocking updates on all apps in google play.

Bluetooth micro-disconnection when playing music

Hi guys!
Just bought the Redmi Note 5 Global version yesterday. Amazing phone, everything seems to work fine.
Except one thing.. I have some issues with the Bluetooth when I'm listening music through the Bluetooth sound system of my car. The music is played normally but sometimes I have some micro disconnections (maybe each 40s). They appear more often when I'm using the phone at the same time.. The music is stopped during maybe 0.5 second and restart at the same point. Even when the music is played we can sometimes heard some weird stuff like "Trr Trr". I come from a O+ 3T and never had this issue.
Another point is when I try to listen music with my JBL Flip 3 bluetooth speaker, absolutely no issue. My girlfriend's Note 5 has exactly the same problem. We have Android 8.1.0 and MIUI 9.5.17.
I already try to reset network parameters, flush system cache, flush bluetooth cachey, change protocols versions within the developer mode... Nothing better..
So, if someone had the same problem and successfully fix it, it could be cool to post it here. Or any clue is accepted
Thank you very much,
Tom.
See also:
https://forum.xda-developers.com/redmi-note-5-pro/help/bluetooth-media-audio-sound-aac-sbc-t3802183
Not exactly the same problem but Also bluetooth issue.
Thank you, indeed not the same problem and no fix :/
I just create a bug report on the MI website, don't hesitate to confirm the bug to make it more visible.
http://en.miui.com/thread-3230620-1-1.html
Thank you
I have the same problem with my car system.
Which car do you have ?
I'm seeing on forums that Oreo bluetooth has issues with several bluetooth car systems...
Totojet81 said:
Which car do you have ?
I'm seeing on forums that Oreo bluetooth has issues with several bluetooth car systems...
Click to expand...
Click to collapse
Like I posted on the MIUI forum: A Skoda Octavia. So maybe it's a problem that's limited to Volkswagen entertainment systems. Are you using a MIB 2?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I have a VW Golf 7 from 2015. I think it's the first discover media...
What is very strange it that even modifying codec and some stuff within the developer mode I'm not able to find any solution... Seems to be a problem related to Oreo... It's a very very important feature for me, I drive a lot of km each month...
I'm very frustrating... This bug needs to be more confirmed...
Hi guys.
Just a comment to say I notice that Bluetooth skipping are appearing more often when I use the phone while listening to music. When I'm driving for instance if I use Waze when I'm listening to music I have a lot of skipping. If my phone is just the screen off and don't use it I have much less skipping.
Maybe it's "just" a priority problem between bluetooth and other processes...
I brought the phone yesterday.
Unable to pair it with my car built-in Bluetooth in order to make calls. No pairing since I am unable to insert the pairing code in the phone.
My car Toyota RAV4.
This phone is useless for me.
Never had this problems with other phones
Mmmh I think this problem is known, just try to manually set the code to only zeros. Or try searching on the internet with this clue.
Updated to Global Developer MIUI 10 and problem solved.
Pairing now fast and easy
It could be great to know if it solve the skipping issue...

Categories

Resources