Bad news, the LTE functionality test hack used to edit apns on S9 and older phones doesn't work anymore. But good news is, if you know your MSL (all 0's for unlocked), you can create new APNs. Just dial ##3282#, put in your MSL, click APN Settings, and create a new APN with the same settings as APN2 LTE ... internet, but add dun at end of APN type.
You cannot modify the APN once you save it, but if you make a mistake, go to general management, reset, reset network settings to remove the APN you added and fix any problems.
Enjoy
EDIT: Updating profile deletes the APN so you should get used to creating new APNs frequently.
aakid22 said:
Bad news, the LTE functionality test hack used to edit apns on S9 and older phones doesn't work anymore. But good news is, if you know your MSL (all 0's for unlocked), you can create new APNs. Just dial ##3282#, put in your MSL, click APN Settings, and create a new APN with the same settings as APN2 LTE ... internet, but add dun at end of APN type.
You cannot modify the APN once you save it, but if you make a mistake, go to general management, reset, reset network settings to remove the APN you added and fix any problems.
Enjoy
Click to expand...
Click to collapse
Does this back count toward data usage?
Sent from my SM-G965U using Tapatalk
daddymikey1975 said:
Does this back count toward data usage?
Click to expand...
Click to collapse
I do not believe so but I have not been able to verify yet. I can verify that it does switch APN because mobile data cuts off for a min when you switch to the one you made, and a similar procedure on the S9 did not count on my tethering data. I get 50gb and it didn't count at all, just my normal data. I will test with this new one though.
How can i get my sprint MSL ? Can I even get it from them if I am leasing the phone?
pdappcgeek said:
How can i get my sprint MSL ? Can I even get it from them if I am leasing the phone?
Click to expand...
Click to collapse
Just call andtell them you want it if they ask for what tell them you're a developer
Add button is greyed out... I am not unlocked, I used 6, 0's but it let me hit Ok
Hope to find better solutions.
Thanks this worked for me hopefully it sticks without profile getting updated.
How did you edit this my phone will not allow me to edit this its grayed out. I try to add a d it dose nothing
works. :good:
how to get "enhanced LTE" working? so LTE stay connected while on voice call?
It seems that after the new update, I can not change it to my new added apn. Anyone could help?
I just called Sprint and they have me all 0's as my MSL. So means I'm unlocked and I didn't even know. Unless they lied. I'm about to find out when I try this hack.
Update: boo add option is grayed out. I didn't take this newest update and I thought that was the update that prevented adding APN.
If I reset will it reset to the original software version I had when I initially bought phone or the last update?
dtowngs4g said:
If I reset will it reset to the original software version I had when I initially bought phone or the last update?
Click to expand...
Click to collapse
It will reset to your current update. You could flash older though, as long as the bootloader's haven't changed, which I believe hasn't but could be wrong.
Outbreak444 said:
It will reset to your current update. You could flash older though, as long as the bootloader's haven't changed, which I believe hasn't but could be wrong.
Click to expand...
Click to collapse
Thanks. I'm going to look for the version I had when I bought my phone 3/12/19.
I think that Hotpot is included with my Sprint plan. Yip I think it's 50gb hotspot.
Disregard.
Following along... MSL 0's, cant "add" anything... I rarely use the hotspot, but at times I *need* it.
Any idea if anyone has broken this yet? I’m in the same boat where even with my MSL the edit functions are greed out.
is this still working?
esqueue said:
I'm on the most recent update, Got it only a few days ago. I purchased the phone outright from Bestbuy and my MSL seems to be all zeros. I was able to successfully enable wifi hotspot. This was one of the main reason I rooted my phones in the past. I know that this will be patched out eventually but it's awesome at the moment though.
Click to expand...
Click to collapse
would love to know if sprint folks still have the workaround for the wifi hotspot. I'm sitting on an unlocked S10 that I haven't shoved my SIM card in yet because I absolutely need the hotspot sometimes...
Related
I have a Verizon 6800 and being stupid I installed the 3.16.651.0 Sprint Rom on my phone. I reverted back to the original Verizon stock rom with no problem and I'm back on the Verizon network.
But now I have installed DCDs Verizon beta 2.0 rom with the new radio and somehow I am stuck on Sprints towers again. I can tell because it tells me *228 isn't a valid feature code.
My guess is that the "unofficial" Sprint Rom wrote something to the phone that the new radio rom refers to when installed. Is there a way to get it to the Verizon network with the new rom and radio installed?
ryotgz said:
I have a Verizon 6800 and being stupid I installed the 3.16.651.0 Sprint Rom on my phone. I reverted back to the original Verizon stock rom with no problem and I'm back on the Verizon network.
But now I have installed DCDs Verizon beta 2.0 rom with the new radio and somehow I am stuck on Sprints towers again. I can tell because it tells me *228 isn't a valid feature code.
My guess is that the "unofficial" Sprint Rom wrote something to the phone that the new radio rom refers to when installed. Is there a way to get it to the Verizon network with the new rom and radio installed?
Click to expand...
Click to collapse
try and load a verizon PRL.
dcd1182 said:
try and load a verizon PRL.
Click to expand...
Click to collapse
Thanks for responding. But I am having trouble locating one. Do you have a link to a download?
I found a PRL from 2004, would that be too old?
Try here: http://www.corolada.com/prl/
JimSmith94 said:
Try here: http://www.corolada.com/prl/
Click to expand...
Click to collapse
Thank you so much
Fantastic, I am back on the Verizon towers for phone calls.
But now when I try to use the data I get an error:
Error Code: 11
PPP Connection Error
Any clues how to get data back?
ryotgz said:
Fantastic, I am back on the Verizon towers for phone calls.
But now when I try to use the data I get an error:
Error Code: 11
PPP Connection Error
Any clues how to get data back?
Click to expand...
Click to collapse
maybe try a hard reset then dial "*228"?
TopGun2000 said:
maybe try a hard reset then dial "*228"?
Click to expand...
Click to collapse
I tried that and still the same error. I even put the Stock Verizon Rom on and same thing.
ryotgz said:
I tried that and still the same error. I even put the Stock Verizon Rom on and same thing.
Click to expand...
Click to collapse
When I was still w/ vzw, I once logged into my online account and disabled/enabled my data feature to make it work ... give it a shot
Try this to see what your settings are
1. ##778
2. View
3. View Info soft key (bottom left)
4. Modem settings
this is what i have
slot cycle index 2
Preferred serving Auto
Preferred Mode Auto
Hdr Hybrid Enable
Clear mru No
5. View info again
6. Data Parameters
Packet Dial #777
then cancel
if all of that is right then go to settings and set up a new conn. if you need help on that just let me know
if any body else thinks of any thing else please let me know to.
s10onn2o said:
Try this to see what your settings are
1. ##778
2. View
3. View Info soft key (bottom left)
4. Modem settings
this is what i have
slot cycle index 2
Preferred serving Auto
Preferred Mode Auto
Hdr Hybrid Enable
Clear mru No
5. View info again
6. Data Parameters
Packet Dial #777
then cancel
if all of that is right then go to settings and set up a new conn. if you need help on that just let me know
if any body else thinks of any thing else please let me know to.
Click to expand...
Click to collapse
All of my settings are setup just like yours. When I was on the phone with Verizon we created two new connections and didn't work either.
To rule out being a tower refresh issue, I am going to put a non-pda phone on my account then put the 6800 back on.
ryotgz said:
All of my settings are setup just like yours. When I was on the phone with Verizon we created two new connections and didn't work either.
To rule out being a tower refresh issue, I am going to put a non-pda phone on my account then put the 6800 back on.
Click to expand...
Click to collapse
Ok that didn't work either. So it is something definitely on the phone itself. Any ideas anyone?
AKEY?
are you getting an authentication error when dialing *228 or *86? If so, then your AKEY is probably blank. You'll need to contact VZW for it. I might have to call them again cause me being an idiot didn't write it down when I called them for it the 1st time.
I'm getting authentication errors again and lo and behold, my AKEY is missing. I didn't even do a hard reset or flash another rom/radio. Weird.
I'm getting the same error now. I just got my A-Key refreshed from VZW tech support, but now I can't connect to the data network.
Same error here. I updated to new Sprint rom and DCD 3.0.1..
I think i messed up the first time and let Sprint customizations run. I have tried to flash back to original vzw rom, but still can't connect to data network. I have had vzw gen new A key and refresh my data package.
Anyone have a solution for this?
Vancelot said:
Same error here. I updated to new Sprint rom and DCD 3.0.1..
I think i messed up the first time and let Sprint customizations run. I have tried to flash back to original vzw rom, but still can't connect to data network. I have had vzw gen new A key and refresh my data package.
Anyone have a solution for this?
Click to expand...
Click to collapse
Search my posts from 3/11. I posted a solution.
Geckotek said:
Search my posts from 3/11. I posted a solution.
Click to expand...
Click to collapse
I can't find a solution for re-flashing the radio - what did you do there?
I think you did flash the Sprint rom - and let the customs run - are you fully resolved there (*226, epst @ 000000 etc...)?
josh77b said:
are you getting an authentication error when dialing *228 or *86? If so, then your AKEY is probably blank. You'll need to contact VZW for it. I might have to call them again cause me being an idiot didn't write it down when I called them for it the 1st time.
I'm getting authentication errors again and lo and behold, my AKEY is missing. I didn't even do a hard reset or flash another rom/radio. Weird.
Click to expand...
Click to collapse
Just for sanity, the AKEY is always blank. You can't see it after you enter it on Verizon. You also can't re-use it. It's a one shot deal.
I have had this error regardless of any rom (DCD or NexVision). The issue is not being able to connect the vzw network. I don't receive it when I am on wifi but I do if there is a wifi I cannot connect to due to a security key. BTW I have a data block. I phoned support once on the issue and that is the best they could do. Sorry if this isn't helpful.
Carrier: Alltel
Started with WM5 ROM.
Flashed to DCD's 2.1 WM6 ROM last week, no issues noted.
Yesterday flashed to 2.2 WM6.1 ROM and now whenever I get a data session going in a strong EVDO area I get dropped down to 1x when the data session finishes connecting?
I've moved back to 2.1, used no2chems 6.1 ROM and back to DCD's 6.1 ROM. Same problem all around now.
Radio problem maybe? Or user? If radio, anyone get me a link to the original 1.4?
Thanks in advance if anyone has any tips, I've tried looking around but only find people with MMS or other issues.
---------------------
This solution apparently only works for Alltel customers, if anyone finds solutions for Sprint/Verizon/Telus I'll add the solution to this post.
ALLTEL:
1. Enter EPST (##778), Edit (password= 000000).
2. View Info (left soft key).
3. Choose the "Security" item.
4. In the "HDR AN AUTH Password(LONG)" field, click to highlight.
5. Menu (right soft key), Edit
6. In the "Value" field, enter your Hex ESN (make sure all characters are CAPITAL, lowercase will FAIL).
7. Ok. Menu. Ok to save, then reset.
--------------------------------------------
SPRINT:
MADMARTlGAN said:
Hey in case you guys are still having problems with this, I can tell you what worked for me with Sprint.
You'll need your unlock code, if you don't have it, you've gotta get it from either Sprint or from one of the tutorials i've seen floating around here and other forums.
1. Sync your titan to back up your data.
2. ##786# Choose edit, enter your unlock code, then choose menu>restore. This will reset everything to factory settings.
3. Reset
3. ##UNLOCKCODE# Again choose edit.
4. Both MDN and MSID should be your wireless number (this was confirmed by Sprint T2 tech support)
5. Reset
6. Call your voicemail to make sure your phone service is working.
7. Connect to the internet. It should trigger IOTA/Provisioning and then EVDO should be working.
8. Resync your **** and you're good to go.
Hope this helps, it worked for me.
Click to expand...
Click to collapse
I think with Alltel you get 1x when roaming. Do *228 option 3 < Thats to activate your phone if you haven't already
Then do *228 option 2 to update your roaming preferences which ridded me of roaming in coverage area!
Americanmetal said:
I think with Alltel you get 1x when roaming. Do *228 option 3 < Thats to activate your phone if you haven't already
Then do *228 option 2 to update your roaming preferences which ridded me of roaming in coverage area!
Click to expand...
Click to collapse
Thanks for the response, I've been through that already and same results...
I even went back to the stock Alltel ROM and Radio, same thing.
With PRL 30029 AND 40029...
Oh well, I'll figure something out as I love the speed of DCD's 2.2!!!!
jake1s said:
Yesterday flashed to 2.2 WM6.1 ROM and now whenever I get a data session going in a strong EVDO area I get dropped down to 1x when the data session finishes connecting?
Click to expand...
Click to collapse
Did you check Start->Settings->Personal->Phone->Services->Mode of Operation to make sure it wasn't set to 1X only? I think that was the default setting on my phone.
I had this same problem, and then I reflashed with the 3.16 sprint rom twice and it went away.
Appreciate the responses, but I don't have the "Mode of Operation" on my Alltel 6800. And I've reflashed all kinds of ROMs with no luck...
Thanks for the ideas though...
jake1s said:
Appreciate the responses, but I don't have the "Mode of Operation" on my Alltel 6800. And I've reflashed all kinds of ROMs with no luck...
Thanks for the ideas though...
Click to expand...
Click to collapse
With the newest Advanced Config app, you can unhide the "mode of operation" option in there. I got it from here somewhere, do a search. I doubt this is your issue. I had this problem yesterday with Sprint. I got data in 1xRTT, but not EVDO. I ended up calling Sprint and they had to deactivate and reactivate the internet services on my phone. Immediately it worked like a champ.
I had this problem also and was able to take care of it by going into EPST (##778) and going under the security settings and putting the ESN Hex Value of Your Phone under the HDR Password. Mine got lost whenever I upgraded the radio. This will allow you to lock back onto the EVDO network
corwinb said:
I had this problem also and was able to take care of it by going into EPST (##778) and going under the security settings and putting the ESN Hex Value of Your Phone under the HDR Password. Mine got lost whenever I upgraded the radio. This will allow you to lock back onto the EVDO network
Click to expand...
Click to collapse
THANK YOU! THANK YOU! THANK YOU!
That did the trick (after I did it a second time and made the letters capital) and now I'm cruising EVDO style!!
Thanks!!!!
Hi I have this same issue.
i typed ##778 send
and get the view, edit , and cancel options.
do i find the hdr password under the edit?
when i choose edit, i get a password prompt and i do not know the password.
i am on dcd rom 2.2.0
i edited mine, and it does get on ev instead of 1x so i was glad but when i opened ie i cant get a data connection up now at all???
corwinb said:
I had this problem also and was able to take care of it by going into EPST (##778) and going under the security settings and putting the ESN Hex Value of Your Phone under the HDR Password. Mine got lost whenever I upgraded the radio. This will allow you to lock back onto the EVDO network
Click to expand...
Click to collapse
I just checked and I have a bunch of garbled characters in this spot. Does anyone else see something like this?
What did you guys have in that slot before you added your esn hex number?
the password you need is unlock code you can only get from sprint.
i also had the weird characters, i edited these out with my esn hex as mentioned and now i cant get a data connection at all, i get an error that i cannot connect. Anyone with any idea on what i can do?
I thought of downgrading the radio and then installing this one again and starting from scratch any better ideas?
My HDR password is also extended ASCII characters, has been for every ROM version I have run, and I get EVDO and on the Internet as well. I thought that was a problem when I had no data connection from a previous ROM, but it wasn't.
What worked for me was to go all the way back to the official 2.17, then to the leaked 3.16, etc. I made sure everything was set up and working properly on each version before moving on to another ROM.
excess4 said:
the password you need is unlock code you can only get from sprint.
i also had the weird characters, i edited these out with my esn hex as mentioned and now i cant get a data connection at all, i get an error that i cannot connect. Anyone with any idea on what i can do?
I thought of downgrading the radio and then installing this one again and starting from scratch any better ideas?
Click to expand...
Click to collapse
not true there is a program to find out the msl code for your phone if i was on computer i would give u guys the link
aatreya said:
I just checked and I have a bunch of garbled characters in this spot. Does anyone else see something like this?
What did you guys have in that slot before you added your esn hex number?
Click to expand...
Click to collapse
Again, I'm on Alltel so maybe for some unknown reason there is more to it for you Sprint users.
But, my MDR Password field was goofy stuff, deleted it and put in my Hex ESN in ALL CAPITALs and I stay at EVDO when my data connection is made now.
Deleted MDR PASSWORD and put esn hex, internet not working
ok guys i messed up pretty badly and deleted the MDR password and put my esn hex instead and now i cant get on the net.
I have an HTC TITAN running DCD 2.2 and latest 3.27 radio
any suggestions on how to get the password back????
aatreya said:
I just checked and I have a bunch of garbled characters in this spot. Does anyone else see something like this?
What did you guys have in that slot before you added your esn hex number?
Click to expand...
Click to collapse
yes i also have a bunch of giberish in there. i am afraid to change it becuase there will be no way for me to put that giberish back in there with all those weird looking characters.
i found the edit password which was a bunch of 00000 as many as the field would take
and i understand some people now get ev but no data connection now. i am on verizon and i dont know if that will happen to me as well.
my connection now says ev and doesnt change back to 1x anymore so i am going to leave this as is for now and not change it.
also my a-key is blank if that makes a difference. phone works fine though.
whatbish said:
ok guys i messed up pretty badly and deleted the MDR password and put my esn hex instead and now i cant get on the net.
I have an HTC TITAN running DCD 2.2 and latest 3.27 radio
any suggestions on how to get the password back????
Click to expand...
Click to collapse
you mean hdr password right? I did not see an mdr password listed anywhere
I was curious to what these things did, so I ran them. Next thing I know my internet has been disabled. I have full service and I make sure Data Connection is indeed enabled. What should I do? I'm actually watching my battery drain since it's trying to connect and failing...
PRL - Priority Roaming List - gives you new towers and some access updates as the provider changes things
Profile - On sprint is the data profile at registers your phone on their data network and let you use it. My guess is its about the same for other providers.
If you have changed some of the settings in the phone you can break it and you will have to reset everything and start over unless you find the change to fix it.
So do I have to do a hard-reset? I obviously have indeed changed a lot of settings but have no idea what to undo...
Should I bother calling Sprint?
Well I ended up doing a hard-reset and still no internet... No idea what to do now...
CoolTommy said:
Well I ended up doing a hard-reset and still no internet... No idea what to do now...
Click to expand...
Click to collapse
Have you tried to hit "Update Profile" again? If not try that. It that doesn't work then yes, you need to call sprint and have someone walk you through manually programming your phone. I know you're probably stressing but, trust me, this is no big deal. Easy fix for sure.
Good news, I talked to "Bob" at Sprint's customer service and had me change my Profile from 0 to 1 and everything is back to normal...
I give props to their CS, I could actually understand him!
PLease a little more info...
Where and how did you change your profile, is it a regestry edit or what?
I have MSL but where do i change profile?
Artanis said:
PLease a little more info...
Where and how did you change your profile, is it a regestry edit or what?
I have MSL but where do i change profile?
Click to expand...
Click to collapse
No, it's in Settings...
Does anyone have cab files for these? I found them on PPCGeeks but the site is down and I am in need of data to download my work emails. I also don't have a stock rom to flash back to in order to get the options back. Thanks
EDIT nevermind found it
How can I change my mms settings. when I open messages and the click settings then click connection settings it shows the settings but will not let me edit them can anyone help with this thank you
I belive there is a way to edit these settings via cdma workshop but i dont know too much about that
I cant get the phone to connect to the work shop
Does anybody know if they have rooted this phone yet I read the forum about it it does seem like they have yet
Root is a work in progress.
What are you messing with your settings for? if your having issues just run *288 and let it do it. if that doesnt work use the RUU Update, and then reprogram your phone and use *288
I cant I have the Eris running on Cricket I have the phone, internet, text and the market running great but would like to have mms
How did you get it running on cricket? Didnt you have to flash stuff for that work, if so please post me links asap. It will inevideably lead to root.
FireSokar said:
How did you get it running on cricket? Didnt you have to flash stuff for that work, if so please post me links asap. It will inevideably lead to root.
Click to expand...
Click to collapse
I'll take another order of that link as well.
Who wants to BET hes talking about the MOTO Droid...
FireSokar said:
Who wants to bed hes talking about the MOTO Droid...
Click to expand...
Click to collapse
Quit trying to correct me in every forum i post in.
FireSokar said:
Quit trying to correct me in every forum i post in.
Click to expand...
Click to collapse
Talking to me? If so, I meant that as I'm confused as to whether he did mean the Droid or not.
Nice ASSumption though.
Change PRL, network settings
dial ##778 then edit settings
so some body finde out how he did to make it work on criket?
wat about using APN Backup & Restore?
deseo said:
so some body finde out how he did to make it work on criket?
Click to expand...
Click to collapse
no, as above, edit security settings in epst
uhhh, yoo hooo! guys, the htc based android phones are dirt simple to program for use on another network..
I've had my eris running full on alltel over two months now with the unl. data plan. Never looses 3G, alltels 3G coverage is wicked sweet.
Getting Voice & SMS working:
Get current .PRL file for your network(alltel, sprint, vzw, cricket, etc..), google for it. Mount your phone thru USB, drag the PRL to the root of the SD card.
Unmount
Dial##PRL
Enter SPC code
Select PRL from SD
Restart Phone
Activate phone with your carrier, lie about what phone it is, i told alltel i'm a Samsung Delve, a phone they have.
They'll tell you to *228 it, this will work perfectly after you've programmed the PRL described above.
Hang up with them.
Getting data to work:
Dial ##PST send.
Enter SPC code
Go to security...
Google for those settings for your carrier and enter all that is asked for in that menu screen.
Do nothing else, restart the phone.
Now, setting up MMS on the Eris is a pain, I still can't get it.
When going to Messages, Settings, Connection settings, ... i am not allowed to edit those settings, they're stuck at vzw values.
IF .. and ONLY if I install the "quick settings" app in the market, disable mobile network, THEN go to messages, connection settings, .. i can now edit those values and change them to alltel's mms addresses... go home, them go back into messages, connection settings, all is saved, good. If I go and re-enable mobile network, ... the mms connection settings switch back to vzw... GAHH!!!
stevey500 said:
IF .. and ONLY if I install the "quick settings" app in the market, disable mobile network, THEN go to messages, connection settings, .. i can now edit those values and change them to alltel's mms addresses... go home, them go back into messages, connection settings, all is saved, good. If I go and re-enable mobile network, ... the mms connection settings switch back to vzw... GAHH!!!
Click to expand...
Click to collapse
It's probably just allowing you to input settings but unable to save them due to lack of permissions. Looks like MMS is screwed until root gets here :\
how do you get web working on crickets network ive change the settings from the security but still no luck.
I'm trying to use my iPad sim (converted into a regular sim card) in my note, but I am unable to use the APN "broadband". Everytime I create that APN, it will automatically delete it off the list. It seems like AT&T is blocking that APN from being used. Is this possible, or a way around this?
Thanks
Try using "phone" as the apn
Sent from my SAMSUNG-SGH-I717 using xda premium
the only apn ipads have is broadband.... some older prepaid unlimited ones have isp.cingular as the apn
yeah...only APN iPads can use is "broadband". Anyone know how to bypass this?
anyone know how to do this?
ogxjason15 said:
anyone know how to do this?
Click to expand...
Click to collapse
Are you rooted? I don't have an answer, but I suspect the solution involves being rooted and freezing an AT&T management .apk that is deleting any APNs that you add.
burhanistan said:
Are you rooted? I don't have an answer, but I suspect the solution involves being rooted and freezing an AT&T management .apk that is deleting any APNs that you add.
Click to expand...
Click to collapse
Yes, I am currently running TPC NOTE V2.
My first contribution to the forum
I got the ATT Note last weekend off second hand, so no contract.
I want to use it primarily as a tablet with data plan (google voice can serve as phone if needed). So I want to try iPad data plan.
I got my iPad sim activated for a monthly plan, but as members noted, that for some reason, the new APN setting can not be saved for some reason (can we blame ATT?). So you can not use the iPad sim directly.
I tried couple of ways, and finally figured out how to do it on my Note:
(1) Create the new APN as previously instructed (call it "iPad" or whatever), with "phone" as the APN setting. Save it.
(2) On the APN list, select the new one, so the default AT&T PTA is grey out, and the new one ("iPad") is on.
(3) Now, change the APN from "phone" to "Broadband" (Sorry I forgot this important step last night!)
(4) Then, instead of saving the change (which would fail), I jumped out of the setting and go straight to home, then web browser to click a link. It might give you an error the first time, but when I clicked the link again, it would eventually start working, and the 4G icon showed up on the top menu.
I wen back to APN setting. Found the new setting "iPad" was gone. However, I did notice the default APN setting (AT&T PTA) remained grey out (not selected).
So, it seems if you force off the default setting, you can go straight to 4G network with iPhone's data plan.
I disabled the cellular network and reactivated it. The connection still worked, so hopefully it will last.
[Update]: Sorry I forgot the important step (3). I tried again, and the whole process works. Yes, I have the phone unlocked already for T-Mobile use (paid $25 online to get the unlock code. Not sure if it is necessary for AT&T data sim card, though).
i think
I think your note has to be unlocked .thats only way
iPad Sim
I am using iPad SIM in note and its working fine. I don't get LTE but HSPA Speeds. I picked new SIM from AT&T Store for my iPad and activated under different email now using it with $30 3GB Plan. I have 'broadband' as apn. My note is unlocked running SAUROM RC 6. I had issues with RC 7 so reverted back.
Rudeman74 said:
I think your note has to be unlocked .thats only way
Click to expand...
Click to collapse
It just can't be on an AT&T based rom. Since Saurom rom is based off of Rogers, the apn "broadband" will work. Has nothing to do with unlock, it's the software that prevents you from using that APN.
montanan said:
I am using iPad SIM in note and its working fine. I don't get LTE but HSPA Speeds. I picked new SIM from AT&T Store for my iPad and activated under different email now using it with $30 3GB Plan. I have 'broadband' as apn. My note is unlocked running SAUROM RC 6. I had issues with RC 7 so reverted back.
Click to expand...
Click to collapse
You are now able to use LTE on the note since AT&T now has a plan for the "New iPad". You just need to change the plan in the online management. Just change the IMEI to the "New iPad". The APN will still be broadband.
I found a IMEI from some person selling it on eBay
powerbooks said:
I got the ATT Note last weekend off second hand, so no contract.
I want to use it primarily as a tablet with data plan (google voice can serve as phone if needed). So I want to try iPad data plan.
I got my iPad sim activated for a monthly plan, but as members noted, that for some reason, the new APN setting can not be saved for some reason (can we blame ATT?). So you can not use the iPad sim directly.
I tried couple of ways, and finally figured out how to do it on my Note:
(1) Create the new APN as previously instructed (call it "iPad" or whatever), with "phone" as the APN setting. Save it.
(2) On the APN list, select the new one, so the default AT&T PTA is grey out, and the new one ("iPad") is on.
(3) Now, change the APN from "phone" to "Broadband" (Sorry I forgot this important step last night!)
(4) Then, instead of saving the change (which would fail), I jumped out of the setting and go straight to home, then web browser to click a link. It might give you an error the first time, but when I clicked the link again, it would eventually start working, and the 4G icon showed up on the top menu.
I wen back to APN setting. Found the new setting "iPad" was gone. However, I did notice the default APN setting (AT&T PTA) remained grey out (not selected).
So, it seems if you force off the default setting, you can go straight to 4G network with iPhone's data plan.
I disabled the cellular network and reactivated it. The connection still worked, so hopefully it will last.
[Update]: Sorry I forgot the important step (3). I tried again, and the whole process works. Yes, I have the phone unlocked already for T-Mobile use (paid $25 online to get the unlock code. Not sure if it is necessary for AT&T data sim card, though).
Click to expand...
Click to collapse
Thanks much for this ....I could not find any other solution so far.....I appreciate you writing this. It works.