Related
Just wanted to see if anyone has any of the Case Mate series cases for the Evo 3d? I was thinking about getting the Tough case, but from a video review on youtube, the case apparently has a random port on the bottom...
http://www.youtube.com/watch?v=mskLfmXEh0Y
Where I have found them online:
http://www.mobilecityonline.com/wireless/store/productdetail.asp?productid=28094#section10
http://www.wirelessground.com/htc-e...3d-case-mate-tough-case-black&channelid=FROOG
Currently have the Defender, but DAMN its bulky
I will never buy another case mate again
Sent from my Nexus S 4G using XDA App
mattfmartin said:
I will never buy another case mate again
Sent from my Nexus S 4G using XDA App
Click to expand...
Click to collapse
Please fill me in lol
i have a casemate and i have been using this badboy since sept! i use this on my evo 4g over my seidio rugged! and i am rough on my ph and dropping it and this casemate is tough! also slides in and out of a pant pocket real good!
Sent from my PC36100 using XDA Premium App
HTCRALEIGHFAN said:
i have a casemate and i have been using this badboy since sept! i use this on my evo 4g over my seidio rugged! and i am rough on my ph and dropping it and this casemate is tough! also slides in and out of a pant pocket real good!
Sent from my PC36100 using XDA Premium App
Click to expand...
Click to collapse
Maybe I will have to reconsider, I would still like to see some more people weigh in. I have the OB Defender right now, and its excellent protection wise just a bit bulky...
The convert from seidio/BB is pretty awesome two good cases plus a nice clip. This is until I can get the ballistic case
Sent from my PG86100 using Tapatalk
I have the Tough Case, just delivered today. It's similar in design to the Otterbox Commuter -- a thin silicone base layer covers the entire phone, while a hard plastic shell snaps around the back, sides and corners.
Pros: The fit is absolutely perfect. The silicone layer over the buttons is just the right thickness -- the power, volume and camera buttons are all covered, but their function is not impeded in the slightest. I was particularly delighted by how well the camera button works, no interference with function or sensitivity at all.
Around the front edge, the silicone layer rises a few millimeters above the screen, so you can comfortably place the phone face down without worrying about scratching the glass. Similarly, the camera lenses and flash are deeply recessed on the back, with perfectly sized openings around each (which, IMO, is how the lenses should've been on the phone itself). You can drag your phone across concrete with no worries, if that's the kind of thing you're into.
The hard plastic outer layer has a smooth matte coating that makes it feel more like silicone than hard plastic, giving it a very nice feel in the hand. It's also covered with a raised, textured pattern, making the phone very unlikely to slip out of your hand. By contrast, the Otterbox Commuter I briefly had on my Hero had a plastic outer shell that was slick and shiny, and the phone slipped out of my hand twice within the two days I left it on (which is why I used it only briefly).
Cons: My only real complaints are aesthetic. I really like the slim, refined look of this phone, and the grippy, textured, matte black surface of this case, while very protective and easy to hang on to, is a tad inelegant, giving the phone more of an industrial feel. It also adds a bit of bulk, which was immediately noticeable when I pocketed the phone with it on (although I will say it's positively svelte compared to some of the other cases I've seen pictured on this forum). The phone does also feel noticeably heavier with this case on.
In response to the OP, the case does have a couple of mysterious ports at the bottom. One lines up with the slot you use to pry the battery cover off, while a smaller one lines up with a tiny hole just to the left of the other (edit: duh! that's the mike, thanks minieod). I don't know why those are there, but they don't do any harm.
Overall, I'd say thumbs up. If you like the basic design of Otterbox cases but want something slimmer than the Defender and easier to hold than the Commuter, this is probably your best choice.
I have the casemate "barely there" case on my OG Evo. I have been using it since shortly after launch and it has been just the right amount of protection without adding a lot of bulk. I keep my phone in a pocket with nothing else so that case helps with day to day wear and more importantly it makes it so the camera glass doesn't touch the table when the phone is laying on its back.
I am thinking of picking up an Evo 3d for my girlfriend in order to replace her dying palm Pre but she is pretty rough on phones. She drops hers a lot and throws it in her purse with keys and change and stuff. The thought of getting her a "glass slab" style phone frightens me. I will probably pick up a barely-there case for the Evo 3d if I get it for her. It's weird that they don't list them on their site but that mobilecity site seems to have them in a few colors for $15. That's a good price IMO and my last one came with a free screen protector. Hopefully that will be enough to protect her phone.
I guess I can also cancel the insurance on my Evo and move it to her 3d if I get it since my account is due for upgrade and hers won't be for two years if i get her the 3d.
po96od said:
The case does have a couple of mysterious ports at the bottom. One lines up with the slot you use to pry the battery cover off, while a smaller one lines up with a tiny hole just to the left of the other. I don't know why those are there, but they don't do any harm.
Click to expand...
Click to collapse
that "mysterious hole" on the left of the phone you'll want to remain uncovered --- unless you'd rather not talk to anyone ---- thats the microphone
other than that i totally agree with you on the case - i got it at the sprint store and i LOVE it
i had the TPU case from the user who posted on here earlier in june (forgot your username sorry!) and sold them on tpu-cases.com or something like that... it was 8 bucks shipped, and great quality for tpu
but i tried this on when i was waiting at the store picking up my moms evo3d for her bday gift.... and decided to get the case-mate tough, and give her my tpu one
the casemate tough is sleek....i dont agree with po96 on the "inelegant" , because its pretty similar to the style of the battery cover on the 3d....
i like it a lot, and it feels very solid and protected....
i used to use the otterbox commuter on my evo4g and loved it, but i really hated the new design for the 3d....
minieod said:
that "mysterious hole" on the left of the phone you'll want to remain uncovered --- unless you'd rather not talk to anyone ---- thats the microphone
other than that i totally agree with you on the case - i got it at the sprint store and i LOVE it
i had the TPU case from the user who posted on here earlier in june (forgot your username sorry!) and sold them on tpu-cases.com or something like that... it was 8 bucks shipped, and great quality for tpu
but i tried this on when i was waiting at the store picking up my moms evo3d for her bday gift.... and decided to get the case-mate tough, and give her my tpu one
the casemate tough is sleek....i dont agree with po96 on the "inelegant" , because its pretty similar to the style of the battery cover on the 3d....
i like it a lot, and it feels very solid and protected....
i used to use the otterbox commuter on my evo4g and loved it, but i really hated the new design for the 3d....
Click to expand...
Click to collapse
PMed you, guess you might not have noticed. Anyways has anyone else seen these in a Sprint Store? I didn't see one at mine but maybe he was at a non-corporate store?
#Winning# said:
PMed you, guess you might not have noticed. Anyways has anyone else seen these in a Sprint Store? I didn't see one at mine but maybe he was at a non-corporate store?
Click to expand...
Click to collapse
hey sorry, my PM notifications are not working i guess
i am going to take some pics of mine now and post here
(note: these pics were taken on an Evo3D)
http://imgur.com/a/cCdel
neodorian said:
I guess I can also cancel the insurance on my Evo and move it to her 3d if I get it since my account is due for upgrade and hers won't be for two years if i get her the 3d.
Click to expand...
Click to collapse
get the 3d on her plan...swap the 3d to your number, and your evo to hers....at that time you both have two new activated phones...both are now eligible for the TEP
also, now you will have a 3d
minieod, nice pics. I was meaning to post some, but you were way more completist about it than I would've been.
The mystery hole at the bottom is for a lanyard.
i wish it would come with a holster
Phreddo said:
The mystery hole at the bottom is for a lanyard.
Click to expand...
Click to collapse
lol
no...its the microphone...when your mouth makes noise, that noise goes into that hole
po96od said:
I have the Tough Case, just delivered today. It's similar in design to the Otterbox Commuter -- a thin silicone base layer covers the entire phone, while a hard plastic shell snaps around the back, sides and corners.
Pros: The fit is absolutely perfect. The silicone layer over the buttons is just the right thickness -- the power, volume and camera buttons are all covered, but their function is not impeded in the slightest. I was particularly delighted by how well the camera button works, since the TPU case I was initially using basically disabled it.
Around the front edge, the silicone layer rises a few millimeters above the screen, so you can comfortably place the phone face down without worrying about scratching the glass. Similarly, the camera lenses and flash are deeply recessed on the back, with perfectly sized openings around each (which, IMO, is how the lenses should've been on the phone itself). You can drag your phone across concrete with no worries, if that's the kind of thing you're into.
The hard plastic outer layer has a smooth matte coating that makes it feel more like silicone than hard plastic, giving it a very nice feel in the hand. It's also covered with a raised, textured pattern, making the phone very unlikely to slip out of your hand. By contrast, the Otterbox Commuter I briefly had on my Hero had a plastic outer shell that was slick and shiny, and the phone slipped out of my hand twice within the two days I left it on (which is why I used it only briefly).
Cons: My only real complaints are aesthetic. I really like the slim, refined look of this phone, and the grippy, textured, matte black surface of this case, while very protective and easy to hang on to, is a tad inelegant, giving the phone more of an industrial feel. It also adds a bit of bulk, which was immediately noticeable when I pocketed the phone with it on (although I will say it's positively svelte compared to some of the other cases I've seen pictured on this forum). The phone does also feel noticeably heavier with this case on.
In response to the OP, the case does have a couple of mysterious ports at the bottom. One lines up with the slot you use to pry the battery cover off, while a smaller one lines up with a tiny hole just to the left of the other (edit: duh! that's the mike, thanks minieod). I don't know why those are there, but they don't do any harm.
Overall, I'd say thumbs up. If you like the basic design of Otterbox cases but want something slimmer than the Defender and easier to hold than the Commuter, this is probably your best choice.
Click to expand...
Click to collapse
So sounds like you like it better than the Otterbox. I am currently using the Commuter and love the feel of it (didn't feel slippery to me, has a nice texture) but hate the gap at the top. I am getting a new silicone layer from Otterbox to see if that one fits better. I think I might order the Tough Case as well and compare the two. Overall would you say its thinner than the Commuter?
I wish I could find the Tough Case in stores to give it a test before purchasing. I hate having to buy online and pay return costs for shipping if I don't like it but I guess that's what I'll have to do.
*update* Just ordered a Tough Case. There is a 20% off code for their online store: CM06-SP20. The online store has free shipping to US addresses and didn't charge me tax, so $28 total for the tough case (originally $35). Not bad! If I don't like it I can just pay return shipping. I might just keep it for a backup.
mrazzino said:
So sounds like you like it better than the Otterbox. I am currently using the Commuter and love the feel of it (didn't feel slippery to me, has a nice texture) but hate the gap at the top. I am getting a new silicone layer from Otterbox to see if that one fits better. I think I might order the Tough Case as well and compare the two. Overall would you say its thinner than the Commuter?
I wish I could find the Tough Case in stores to give it a test before purchasing. I hate having to buy online and pay return costs for shipping if I don't like it but I guess that's what I'll have to do.
*update* Just ordered a Tough Case. There is a 20% off code for their online store: CM06-SP20. The online store has free shipping to US addresses and didn't charge me tax, so $28 total for the tough case (originally $35). Not bad! If I don't like it I can just pay return shipping. I might just keep it for a backup.
Click to expand...
Click to collapse
eep - its on amazon for $30 + free shipping (which is free returns)
Anyone know if either the tough case or the barely there case will fit into the belt holster for the Seido Surface case(aka the plaitunum case at Best Buy)?
I'm currently using a TPU case in the Platinum holster because I like the added camera area coverage of the TPU case. I just hate the camera button covering of the TPU case.
The Case Mate cases look great but I really need a belt clip with them.
the wifes casemate shipped yesterday and will be here this weekend ill toss up pics
Sent from my PC36100 using XDA Premium App
Man this phone is so nice and sleek, I'm not sure if I want to put a case on it or not.
Love this phone compared to my evo 4g. Blows it out of the water. Decent battery life as well.
What are your thoughts on cases?
I had started a seidio active vs otterbox commuter thread but didn't get much love. Maybe people are using other cases I haven't thought of. All I am using is a leather pouch.
ideas, thoughts?
I'm using a Commuter that I modified slightly for the car dock. I always second-guess the expensive Otterbox cases but last week the Photon took a trip to the floor and nearly bounced back into my hand. That settled that one.
One from the mall. Black rubberized and i'm happy. I believe its cellairis or something like that
Sent from my MB855 using XDA App
One thing I don't like so far is it is a little difficult to push power button. I find myself missing it from time to time. I think the otterbox would help with that but I'm not sure if I wanna give up the lightweight and sleek feel of it.
Yeah, sleek and Otterbox don't go together. I prefer caseless but I know it only takes one drop to all but stop my life. I'm finding myself waaaay too reliant on this little device.
Amazon had/has the Commuter for $22, which I think is worth it.
How much bulk does it add?
Kevets said:
Yeah, sleek and Otterbox don't go together. I prefer caseless but I know it only takes one drop to all but stop my life. I'm finding myself waaaay too reliant on this little device.
Amazon had/has the Commuter for $22, which I think is worth it.
Click to expand...
Click to collapse
The commuter is roughly 5/8" thick by 2 3/4" wide by 5 1/4" tall.
The phone is roughly 1/2" by 2 5/8" by 5" respectively.
The case is actually a good hand-grip size.
Using the Seidio Active. So far I am liking it. Fits good and nice balance for me between function and protection.
Thanks for that.
Kevets said:
The commuter is roughly 5/8" thick by 2 3/4" wide by 5 1/4" tall.
The phone is roughly 1/2" by 2 5/8" by 5" respectively.
The case is actually a good hand-grip size.
Click to expand...
Click to collapse
I've dropped my phone so many times with my Otter-box Commuter Case and stopped gasping after the third drop I'm clumsy but it's defiantly a great case!
Im using the otter box commuter case and its been great so far, I drop my phone alot and I know that the otter box works great, I dropped a friends evo 3d and the screen shattered,, no bueno especially when your trying to date her
---------- Post added at 12:20 AM ---------- Previous post was at 12:20 AM ----------
Kevets said:
Yeah, sleek and Otterbox don't go together. I prefer caseless but I know it only takes one drop to all but stop my life. I'm finding myself waaaay too reliant on this little device.
Amazon had/has the Commuter for $22, which I think is worth it.
Click to expand...
Click to collapse
I got mine at the sprint store for 20
I first bought my wife this case for her Evo and liked it so much that I got one for my mopho! Its thin, feels like it part of the phone and yet it can take some drops.
http://www.amazon.com/gp/aw/d/B005F9ZQB4?is=300&qid=1318310572&sr=8-2&in=3
I currently have 2 otterbox cases. 1 defender series and 1 commuter series. Both have their uses. I mainly use the defender for work so I can easily clip my phone into the holster and not leave it laying around in a rush to go do something. It's also amazing for those unfortunate occasions where the phone leaves your hand and makes a 3 or 4 ft dive to the ground. Access to every button and port is also amazing with this case. power/wake button is very easy to press, no problems at all. same with volume rocker and camera buttons. I love the port covers on this case b/c they are extremely durable and long lasting. However, my favoite benefit of the defender case is how easily it can be removed... I know you're thinking "wtf, this guy is an idiot!" Well the reason I say that is b/c i actually sell cellphones for a living and offering otterbox cases is second nature. having installed and removed just about every case they make, many of the other defenders are difficult to remove with the little clips on the internal plastic part of the case which is snug on the phone. The photon defender is almost effortless if you like to trade out ur cases on occassion it is a major benefit
I use the commuter series when not at work b/c I don't typically liek to wear my phone on my hip if I have an available pocket... just my personal preference. Commuter is definetly much less bulk but I also don't like the way that it's designed as far as installing/removing from the phone. It's a bit of a pain. Also, unfortunatly the part of the case that makes it grip in your hand makes it difficult to insert/remove from a normal pocket.
I have decided that I'm going to try out one of the tpu cases from amazon.com for a non work alternative and we'll see how that goes.
Let me know if you wanna sell the commuter.
rickyhfc02 said:
I currently have 2 otterbox cases. 1 defender series and 1 commuter series. Both have their uses. I mainly use the defender for work so I can easily clip my phone into the holster and not leave it laying around in a rush to go do something. It's also amazing for those unfortunate occasions where the phone leaves your hand and makes a 3 or 4 ft dive to the ground. Access to every button and port is also amazing with this case. power/wake button is very easy to press, no problems at all. same with volume rocker and camera buttons. I love the port covers on this case b/c they are extremely durable and long lasting. However, my favoite benefit of the defender case is how easily it can be removed... I know you're thinking "wtf, this guy is an idiot!" Well the reason I say that is b/c i actually sell cellphones for a living and offering otterbox cases is second nature. having installed and removed just about every case they make, many of the other defenders are difficult to remove with the little clips on the internal plastic part of the case which is snug on the phone. The photon defender is almost effortless if you like to trade out ur cases on occassion it is a major benefit
I use the commuter series when not at work b/c I don't typically liek to wear my phone on my hip if I have an available pocket... just my personal preference. Commuter is definetly much less bulk but I also don't like the way that it's designed as far as installing/removing from the phone. It's a bit of a pain. Also, unfortunatly the part of the case that makes it grip in your hand makes it difficult to insert/remove from a normal pocket.
I have decided that I'm going to try out one of the tpu cases from amazon.com for a non work alternative and we'll see how that goes.
Click to expand...
Click to collapse
TPU! my sis is rockin one too and ive liked them. fit firm, slid easy into my pocket, good feel in the hand, and they are like 6-7 bucks
might have to step up and get me a TPU case, that thing is sexay!
has anyone found a carbon look case yet? i'd be much much more interested in form than function if one is found!
rickyhfc02 said:
I currently have 2 otterbox cases. 1 defender series and 1 commuter series. Both have their uses. I mainly use the defender for work so I can easily clip my phone into the holster and not leave it laying around in a rush to go do something. It's also amazing for those unfortunate occasions where the phone leaves your hand and makes a 3 or 4 ft dive to the ground. Access to every button and port is also amazing with this case. power/wake button is very easy to press, no problems at all. same with volume rocker and camera buttons. I love the port covers on this case b/c they are extremely durable and long lasting. However, my favoite benefit of the defender case is how easily it can be removed... I know you're thinking "wtf, this guy is an idiot!" Well the reason I say that is b/c i actually sell cellphones for a living and offering otterbox cases is second nature. having installed and removed just about every case they make, many of the other defenders are difficult to remove with the little clips on the internal plastic part of the case which is snug on the phone. The photon defender is almost effortless if you like to trade out ur cases on occassion it is a major benefit
I use the commuter series when not at work b/c I don't typically liek to wear my phone on my hip if I have an available pocket... just my personal preference. Commuter is definetly much less bulk but I also don't like the way that it's designed as far as installing/removing from the phone. It's a bit of a pain. Also, unfortunatly the part of the case that makes it grip in your hand makes it difficult to insert/remove from a normal pocket.
I have decided that I'm going to try out one of the tpu cases from amazon.com for a non work alternative and we'll see how that goes.
Click to expand...
Click to collapse
The otterbox is a lil bulky, and the commuter is good too.
---------- Post added at 07:50 PM ---------- Previous post was at 07:31 PM ----------
wagonattack said:
might have to step up and get me a TPU case, that thing is sexay!
has anyone found a carbon look case yet? i'd be much much more interested in form than function if one is found!
Click to expand...
Click to collapse
Check Amazon for a carbon case.
Check this Carbon Fiber Case Out, CLICK HERE (http://www.amazon.com/Sprint-Motoro...SU12/ref=sr_1_3?ie=UTF8&qid=1318549681&sr=8-3)
I like the look of that case but the power button is a little tough to press so if I do get one I think I want one with something that goes over the power button.
I currently have Ghost Armour, It's more of a scratch resistance film, not a protective cover. I do not like anything that adds bulk personally. With that said, in the last 5 years, I have owned a AT&T Tilt, AT&T Fuze, Sprint Evo 4G, and now Photon. I dropped the Fuze once. I treat my phones like a 2 month old baby!. I have special mouse pads at work, living room, bed room, ect. To be honest, I have sold ALL of my phones for more that I paid for them in the first place! David
Seidio Active + holster. loving it!
Sent from my MB855 using XDA App
Looking to get a new case and was hoping to hear some opinions from those of you with cases or whom have had a chance to try a few out. I currently have the D30 flex protective cover from T-mobile (black and for sale if anyone wants it 10$ no drops). I really like the D30 material and have enjoyed their past products but my girlfriend's phone just broke (not using D30, but it got me thinking). Given that the Amaze is a heavier phone and the glass sticks out so much I feel I should step up the protection on this phone to prevent knicks on the bottom two corners that could potentially cause cracks. I've looked around at a few cases and have narrowed it down to a few.
-Trident Kraken AMS Case w/ Holster for HTC Amaze 4G, Blue
-Ballistic Case for HTC Amaze 4G / Ruby
-HTC Amaze 4G Tough Cases
(If I'm missing some amazing case let me know)
Price really isn't a factor, they are relatively the same price, and in the end it is a good idea to get something that will work and last in the sense of protecting an investment.
Only issues I have heard of but have not found anything concrete to go off of have been:
-Covering of rear holes (Receptiom, WiFi, noise cancellation; although I don't think I'd mind making them myself if I decided strongly on a case without them)
-Inaccurate fitment (as in the hard part of the case falling off easily or likely on impact)
-Thickness leading to lack of efficiency (no more pocketing, bricklike, etc)
-Magical Lint magnets (need I say more?_
Give me your thoughts and opinions if you'd like, or make a "case" for a case.
Thanks in advance!
Bump Bump Bump
I'm going to go ahead and make my 1st post. This is a good thread. I think you have a general idea of the best case for the Amaze already. You want to make a smart purchase, and not buy something only to find out next week what you really wanted is just posted. My advice would be make the best decision based on the facts you have already stated; keep us up to date, let us know the pros and cons. Then if anyone else makes a thread like this we can always link them to this post. As it is already quite informative
Sent from my HTC_Amaze_4G using XDA App
tpu case is the best for me... for my sensation and in a week , to my amaze as well..
Sent from my HTC Sensation XE with Beats Audio using xda premium
I have a Trident Aegis case for my Amaze and let me say, it kicks ass. The screen protector that comes with it really blows but I just put on a Invisible Shield instead. Even though the case isn't the most protective one that Trident produces, my phone feels really secure in it. Its not much of a lint magnet, but it attracts cat hair like none other lol It has covers for the charge port and headphone jack. The only problem is that if you don't have any finger nails, the charge port cover is hard as hell to get out. It fits in a pocket decently as long as you're not wearing tight ass jeans. I feel like my phone is rather protected and I'm rather impressed with it. I highly recommend it.
I got mine from eBay (shipped from California) and it is cheap and good quality. The case case and screen protectors (a few of them) are just a few bucks.
Just my opinion but I hope it helps.
I gut the Trident kracken in rd d silicone.. silicone kicks ass the hard plastic fits good..
no lint problems.
Needed to drill the ambient light and noise holes myself for a big improvement...
Also the belt clip thing is good but I don't like it over the screen face...if it breaks that will be some nasty jagged plastic directly jamming into my touch screen..
I am very confident my phone will be safe in this case on my construction job sites
I wish it had a hinged door like screen cover...I had that years ago on a compaq PDA... Worked great as a stand too
Sent from my HTC Amaze 4G using xda premium
I have tmobiles D3O impact protection case. I've dropped my phone a few times now and its still in perfect condition. It's also not very bulky either.
Sent from my HTC_Amaze_4G using xda premium
I really like my body glove case w/ kickstand. If not, the Amzer TPU cases is high quality case too. If you're looking to get a TPU case, look for Amzer cases...you won't regret it.
I bought this TPU case on eBay when I first bought the phone. I love it and it is cheap. It is really durable for the phone. Best $2.50 investment I ever made lol
Edited by Moderator: [ebay link removed]
Posting links to external sites such as ebay and craigslist is prohibited. Please take a few minutes to read the rules. Understanding them will avoid problems in the future.
Loving my Ballastic case! Thing makes it like a tank, but I am fine with that. I know I will be okay if I drop it. Best 20 bucks I have spent for this phone!
Sent from my HTC_Amaze_4G using Tapatalk
what do you guys think of this?
http://www.daydeal.com/product.php?productid=64424
Got The Trident Kraken AMS Case w/ Holster (Red)
As you can see in The Pictures Your Phone will look like a heavyweight worry-free drop device.. it has a nice kick stand which will easily break for overtime used but perfect angle as well when in viewing/watching mode..
Will do further review if ever..
am i the only man that swears otterbox kick all the other cases into obscurity? Bit more pricey but hell you have a £400+ device so whats a few brown backs extra to keep it proteced, plus it looks great!
gumshield said:
am i the only man that swears otterbox kick all the other cases into obscurity? Bit more pricey but hell you have a £400+ device so whats a few brown backs extra to keep it proteced, plus it looks great!
Click to expand...
Click to collapse
I think otterbox for the amaze will not be made or they are planning to due to the fact that the amaze is not a all rounded carrier phones, i think Telus and T-Mobile only carry them as for now and rumor has that the Amaze 4g from T-Mobile will be pulled out because it is not selling well on T-Mobile Everyone get's the GS2 because of the bigger screen.. And as i ask one of the sales rep's in T-Mobile they will be releasing a Samsung Galaxy Note Next Year.. hope it's true or she is not shtn me...
honestly i woldnt even think about buying the kraken since it has clips and would brake whenever you drop it. i would really recommend you to get the aegis trident case since in my opinion is more solid than the kraken.
trident kraken
Ive had the trident aegis and the ballistic sg series and the trident kraken. The trident kraken is the best one I've found so far....as far as a case that protects everything...that's easy they don't exist lol. The kraken has dust covers and a nice fit and a belt clip..but the screen protector sucks..no protection for the camera...the dust plugs are a pain to get out...and the belt clip protects nothing when attached (but the back does face out) it covers about one sixth of the phone and is a pain to get on and off.....but i think its the best option as I think t Mobile pissed someone off or something bc no one is making a supremely awesome case for the amaze.. I've looked for sometime now...
tylr0drdn said:
Ive had the trident aegis and the ballistic sg series and the trident kraken. The trident kraken is the best one I've found so far....as far as a case that protects everything...that's easy they don't exist lol. The kraken has dust covers and a nice fit and a belt clip..but the screen protector sucks..no protection for the camera...the dust plugs are a pain to get out...and the belt clip protects nothing when attached (but the back does face out) it covers about one sixth of the phone and is a pain to get on and off.....but i think its the best option as I think t Mobile pissed someone off or something bc no one is making a supremely awesome case for the amaze.. I've looked for sometime now...
Click to expand...
Click to collapse
So did you not like the Ballistic? I think that it would have great protection and not make the phone as bulky as the Kraken. And it already has the holes cut around the camera.
Getting the ballistic case should arrive next week. Will post back when I get it.
Initial impressions are that it looks like it can survive a fall and has all the ports covered and looks nice. Also it has the 3 holes cut out from the back around the camera that the trident doesn't have. Doesn't seem too bulky either.
Let's talk about the Spigen Snap On Case today... For those of you looking to buy this beautifully marketed case I would rethink your decision, but let me tell you exactly why first.
I purchased the case for my gf about two weeks ago and when it came in the mail I was stunned by how nice it looked and felt. The backing is smooth but has a slight texture to it, the case felt sturdy, and just like in the name snapped right on the phone perfectly. The only thing that bothered me was that it didn't fully cover the top and bottom.
So here we are two weeks later and the case has only had to endure 3 slight drops from about knee to hip height...
It's cracked on two corners with the corner closest to the camera button almost ripped all the way off and the corner closest to the power button poking your ear when the phone is in use. I've never seen a case that cost me $15+ break so easily, it's flaw is in it's sturdyness which is what seemed so attractive when I first inspected it and also in the corners which are the ends to the case. I believe if it fully encased the phone it would have faired a lot better.
So there you have it folks. My suggestion? Go with a TPU case, tried and tested these cases look, feel, and work beautifully. My only regret is that i could have gotten 2 TPU cases for the price i got the Spigen Snap On Case for.
Had this case also. Break within two days. The thin plastic strip above the volume buttons. Went with Otter Box Commuter. Just got it yesterday but so far really like it. Smaller and more compact then the defender.
Does any One have a black otter Box cummtter .can u say ITs better then the defender .has Ur USB flap broeken yet . I'm on my second defender .
That's why I like to ask
Sent from my EVO using xda app-developers app
I personally like the commuter better coming from the defender. The defender was too bulky and the rubber pieces aren't durable at all. So instead of getting a replacement I bought a commuter and never looked back.
I have the black commuter and have had it since July. The soft gel flaps are pretty tough. The hardshell piece at the top of the USB flab broke a week ago (very thin).
There is no holster, so I had to large enough case for it on Amazon to carry it on my belt. Commuter case seems to trap a lot of heat for the device.
I've had the Commuter since debut, and have not had one issue with it. All flaps are golden and show no signs of tearing. I use both numerous times throughout the day. Best case I've ever bought fir the Evo line. I can't believe I used those bulky ballistic cases as long as I did.
Sent from my EVO using xda app-developers app
I have the Commuter as well...no problems to report here. My USB cover is fine, no tearing. I am careful with it tho.
My only complaint is the lack of holster.
I'm also on about day 5 of my Commuter. It's awesome. I walked into a Sprint store and all they carried were the Commuter ($40) and Defender ($50). I took them both out of the box and tried them on and the choice was simple. The Defender was way too bulky for my taste, and the belt clip was so late 90's "Nextel"-ish for me lol.
Before the case, I could barely hold the slim phone when trying to type. Now with this case, it has the perfect grippy feel in the back, and it's not noticeably bulky when it's in my pocket. And the rubber protective flaps are a nice touch, no more pocket lint in the USB port every time I take my phone out of my pocket. And it was on a special discounted price! (5 fingers) Best $40 bucks I never spent. :angel:
I have had both cases. I like the Commuter case much better that the Defender. Not as bulky and the flaps are holding up fine. When the phone is in my pocket now, I have to keep checking to see if it's there. It is so light and thin. I bought mine on ebay for a lot less than Sprint also.