What happened:
last night I was working late while reading WhatsApp groups messages from time to time. I noticed the battery reached ~30% then decided to charge the phone. Few minutes later, all of sudden Samsung logo appeared, I thought it was restarting but it keeps freezing on that screen.
What I noticed:
1. Few minutes before it died, I noticed the performance was poor.
I disabled "power saving" to unleash the processor and see what happen.
my S3 looked as if it was gaining some power then losing it. this is when I decided to leave it charging. I spent many years troubleshooting PCs, I'm new to PDAs but I felt that there's big thing happening and the phone will show that sooner or later!
2. I can't access recovery mode. Only download mode is accessible.
3. in download mode, product name is empty
What I did so far:
I'm trying to flash with stock I9300XXELLA, I have (bootloader, PDA, MODEM & CSC)
I used two different releases of Odin:
1. Odin v3.04 error
with (re-partition) selected:
Code:
<ID:0/020> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I9300XXELLA_742798_REV00_user_low_ship.tar.md5 is valid.
<OSM> KIES_HOME_I9300XXELLA_I9300OXAELLA_742798_REV00_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9300XXELLA.tar.md5 is valid.
<OSM> CSC_I9300OXAELLA_BTU.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/020> Odin v.3 engine (ID:20)..
<ID:0/020> File analysis..
<ID:0/020> SetupConnection..
<ID:0/020> Initialzation..
<ID:0/020> Set PIT file..
<ID:0/020> DO NOT TURN OFF TARGET!!
<ID:0/020> Can't open the specified file. (Line: 2564)
<ID:0/020> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
w/out (re-partition)
he error is (There is no PIT partition)
Code:
<ID:0/020> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I9300XXELLA_742798_REV00_user_low_ship.tar.md5 is valid.
<OSM> KIES_HOME_I9300XXELLA_I9300OXAELLA_742798_REV00_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9300XXELLA.tar.md5 is valid.
<OSM> CSC_I9300OXAELLA_BTU.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/020> Odin v.3 engine (ID:20)..
<ID:0/020> File analysis..
<ID:0/020> SetupConnection..
<ID:0/020> Initialzation..
<ID:0/020> Get PIT for mapping..
<ID:0/020>
<ID:0/020> There is no PIT partition.
<ID:0/020> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
2. Odin v3.07 error
with (re-partition) selected:
Code:
<ID:0/020> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I9300XXELLA_742798_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I9300XXELLA_I9300OXAELLA_742798_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_I9300XXELLA.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_I9300OXAELLA_BTU.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/020> Odin v.3 engine (ID:20)..
<ID:0/020> File analysis..
<ID:0/020> SetupConnection..
<ID:0/020> Initialzation..
<ID:0/020> Set PIT file..
<ID:0/020> DO NOT TURN OFF TARGET!!
<ID:0/020> Can't open the specified file. (Line: 1949)
<OSM> All threads completed. (succeed 0 / failed 1)
w/out re-partition:
(There is no PIT partition)
Code:
<ID:0/020> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I9300XXELLA_742798_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I9300XXELLA_I9300OXAELLA_742798_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_I9300XXELLA.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_I9300OXAELLA_BTU.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/020> Odin v.3 engine (ID:20)..
<ID:0/020> File analysis..
<ID:0/020> SetupConnection..
<ID:0/020> Initialzation..
<ID:0/020> Get PIT for mapping..
<ID:0/020>
<ID:0/020> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
I'm newb to this, I appreciate your help.
try this.. i dont know if it ll work ...
download this file http://checkrom.com/threads/resurrec...%84%A2-v4.896/
get into odin and flash this file into your phone through the download mode ... if everything works it should boot into cwm recovery .. then wipe data\factory reset , wipe cache , wipe dalvik cache and reboot ... wait 15 mins and it should work!! Good Luck!
@galaxys3lover : I'm trying this now.
What I did so far:
after the PIT partition error. I downloaded the PIT file of 16GB SGS3.
Started flashing with Odin with re-partition selected. It stucks on "Get PIT mapping.."
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I9300XXELLA_742798_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I9300XXELLA_I9300OXAELLA_742798_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_I9300XXELLA.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_I9300OXAELLA_BTU.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
I searched about the error on the fourms and found many members say it's better to use odin on windows XP, so I installed windows XP on VMware and tried flushing ,, however I still get the same error.
@galaxys3lover
not working, same errors. it looks like sudden death
I have same issue with two of SG3 devices, it's sucks
My nephew has the same issue, but he's not rooted.
Sent from my GT-I9300 using xda app-developers app
if flashing the stock ROM and pit file fails, the only option is to replace the motherboard. that's all there is to it
I only flashed this PDA file:
I9300XXEMA2
Where can I find the CSC and or pit files?
on sammobile
Had Same Exact problem, waiting for someone good reply... desperately.. tried every thing to do with odin no lock pit file error.. don't really want to go to service center.. waiting for some genius xda users guide
Hi,
Was just installing I9000XXJVU_I9000OXAJVU_OXA.zip via odin 3 v1.85 but it got stuck for about 20 min now:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9000XXJVU_CL851880_REV03_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9000XXJVU_REV_00_CL1092175.tar.md5 is valid.
<OSM> GT-I9000-CSC-MULTI-OXAJVU.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
Is this normal? What should i do?
Thanks!
Hi! My rooted S3 started to reboot randomly and suddenly one day stopped working. It's stuck on the "Samsung Galaxys3 GT-I9300" screen. I'm able to enter download mode and recovery mode. I can't use factory reset/wipe data because as soon as it starts the phone reboots.
I've tried several guides to no avail, I just can't get it to work. Kies can't see the phone, but Odin works. Even tried cleaning the power button just in case, but I think that only works for the samsung logo loop. Last thing I tried was a "GT-I9300XXEMG4_KOR_MULTI_FACTORY". This is what happens:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I9300XXEMG4_1314436_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9300XXEMG4_1314436_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_I9300XXEMG4_1314436_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_I9300OXAEMG4_KOR_FACTORY_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
I'm at a loss. The phone worked flawlessly (rooted) for more than a year and suddenly this happens. Maybe when the random reboots started I could have done something, but what's done it's done. I've read that I could try changing the motherboard, but they are kinda expensive for something I don't know if it will even work. Tried different computers, USB cables, but it's always the same. I remember I had the avast anti theft app, but I don't know if this is what's preventing me from wiping the data or fixing the phone.
I will pay Bitcoin for successful help.
I tried to downgrade from 6.0.1 to 5.1.1 but my phone never booted up. I'm trying to return to 6.0.1 but I receive the error: "SW REV. Check Fail. Device: 4, Binary: 3" and this is the log for ODIN:
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_G925AUCU3BOJ7_CL5927475_QB6773811_REV02_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CP_G925AUCU3BOJ7_CL5927475_QB6773811_REV02_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_ATT_G925AATT3BOJ7_CL5927475_QB6773811_REV02_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_G925AUCU3BOJ7_CL5927475_QB6773811_REV02_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I'm using the restore files from the following post: http://forum.xda-developers.com/att.../g925aucs4cpf1-odin-firmware-restore-t3408875
What is going on with my phone? If I check just the AP option then the phone never ends up booting but if I check BL, AP, CP, and CSC then I receive the above error. The ODIN version is 3.10.7
Hey guys,
I have a problem with my s9 Plus G965F, I installed the factory binary and now I want to restore it back to normal however it is stuck on sboot.bin.lz4. Any idea what to do?
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1207)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin.lz4
Same here, but i have a S7 Edge.
Did you get it fixed?
I have a Samsung S9 plus and when I turn it on it has some purple writing in the top left corner then it goes to the binary mode screen it says factory binary how do I get it just to start normally