Guys, in need of desperate help here!
I've heard my friends joking that girls are not good with tech so I decided to prove them wrong by flashing a custom ROM on my newly acquired Vernee Apollo phone. Well, that ended badly - I succeeded rooting it and installing SuperSU, but I bricked it when I tried flashing a ROM so now when I turn it on it stays on the Vernee logo.
I suppose I have to open TWRP recovery and reset my phone with the backup I created earlier but I can't access it - I can only access Recovery Mode and FastBoot Mode
In FastBoot mode I try to connect the phone to my PC and get to TWRP but adb doesn't find my device anymore...
And In Recovery mode, when I try to flash the ROM, it using 'Apply update from SD card' it says 'Opening update package...' and right after that 'Installation aborted' (and my battery is almost full).
Any help is appreciated! <3
Related
Hi, recently I've tried to install a custom recovery. In the end, I think I've corrupted my recovery img and now my phone just keep rebooting.
But I can boot my phone normally if i use "fastboot continue" in adb shell. But no matter what recoveries I've tried to flash, it just won't solve the bootlooping problem. I've also tried to use flashtool to download back the recovery. But it just keep disconnecting due to the bootloop. Can anyone please help me ?
I'm a user of Huawei Honor 3x G750-U10.
Hello guys. I need your help. I think i somehow soft bricked my dad's s3 3gb ram version.
What i have done is flashing a TWRP img. Twrp was just fine. After that i wiped and installed a rom. I think the zip was broken or something because after the processes is done twrp said there is no OS (operation system). I clicked on reboot anyway by mistake i guess...
And at this point my phone only restarts itself. I can get in FASTBOOT mode. I have the drivers and all but i dont know what can i do with the fastboot mode.. But fastboot seems stable. The phone is not restarting when it is on fasboot mode. Yet as i say again. Is there ANYTHING i can do with fastboot commands? i tried to flash a recovery twrp img it said recovery partition doesnt support flashing..
When i try to boot in recovery the phone seems to start booting to recovery but after a while it restarts itself as it does always...
I tried SP flash tool mode too. My driver is fine, i can see preloader driver on my device manager but as always phone restarts itself to boot in normal mode... If only i can stop the phone from restarting.. I have twrp backup... Or i can flash stock rom...
Please help... Any reply will be appreciated.
I mentioned my problem on the main topic of jiayu s3 but since there is so little user attention there i wanted to open a thread here as well.. Sorry if its out of rule.
I was running CM12 and everything was fine. I received a notification to update to CM 13 and I selected yes. It installed OK, but no GAPPS. I tried everything I could think of to install GAPPS, and kept getting errors. IN my frustrated efforts, something happened to my TWRP and now I only have CM Recovery. I'm trying to reinstall TWRP but my phone is being recognized as a "Marshall London Bootloader Interface" ONLY when in the Fastboot and Recovery mode. I have Huawei Hisuite installed and it recognizes the phone fine when powered on, but as soon as I boot into Fastboot and Rescue mode, it reverts to the MLB interface. I am at my wits end as to how to get my PC to recognize my phone properly when in Fastboot and recovery. I did try removing and reinstalling drivers when in Fastboot, but the Marshall Interface keeps on getting inserted. Any suggestions?????? (I also seem to have erased the SD card that has my original system backup files on it. I tried to flash several downloaded stock ROMs using CM recovery, but they all error out. )
I was finally able to re load TWRP using the Huawei Hi Suite. I flashed Carbon ROM and GAPPS and everything seems to be OK but I still cannot use ADB because the phone is recognized by Windows as a Marshall device ONLY when in bootloader mode and ADB does not find the device. When I connect normally it is recognized as a Mate 2 and it connects normally to Hi Suite. I have no idea what could be wrong, but I have read of other people who have this mysterious "Marshall" device show only up when in bootloader mode. Anyone have any ideas????? Can I go back to stock from here if I don't have a saved recovery image to see if I can fix this???
I have no idea what Marshall device means. Is it possible to place the stock 5.1 ROM on a blank micro SD card and follow the flashing instructions? (boot to download mode or whatever it's called)
ScoobSTi said:
I have no idea what Marshall device means. Is it possible to place the stock 5.1 ROM on a blank micro SD card and follow the flashing instructions? (boot to download mode or whatever it's called)
Click to expand...
Click to collapse
I explained what "Marshall Device" is in the first post. I ended up going back to stock (322) and loosing root. I then updated to 5.1 using the SD card. Everything seems to be working OK. Maybe I'll root again and start over when I have more time.
Wassup aliens!
So I got this gionee M3 and I rooted it with iRoot and tried to flash recovery in nearly every way possible....... I tried using Flashify, Rashr, TWRP manager..... Nothing worked.
1) On Flashify: I kept selecting Flash recovery but the message I get every time is "Error copying the file, please send me the log file".
2) On Rashr and TWRP Manager: They both say they flashed the file but when I boot into recovery all I see is gray screen with a gionee logo. I also lost my stock recovery this way.
3) On PC: My PC never detects my phone as an adb or VCom device........To check for VCom I tried SP Flash Tools..... didn't detects the device. For Adb I tried Adb devices in command prompt but the devices list is empty.
Some info:
I have USB debug mode enabled.
I have stock 5.0.2 android rom with no recovery just factory safe mode through which I can perform some tasks.
If you need any pics or any info just tell me in the comments.
I hope you guys help me.... Been trying for the last 6 days.
HELP ASAP SOS
Love,
Justin Biebar
Tarun0101 said:
Wassup aliens!
So I got this gionee M3 and I rooted it with iRoot and tried to flash recovery in nearly every way possible....... I tried using Flashify, Rashr, TWRP manager..... Nothing worked.
1) On Flashify: I kept selecting Flash recovery but the message I get every time is "Error copying the file, please send me the log file".
2) On Rashr and TWRP Manager: They both say they flashed the file but when I boot into recovery all I see is gray screen with a gionee logo. I also lost my stock recovery this way.
3) On PC: My PC never detects my phone as an adb or VCom device........To check for VCom I tried SP Flash Tools..... didn't detects the device. For Adb I tried Adb devices in command prompt but the devices list is empty.
Some info:
I have USB debug mode enabled.
I have stock 5.0.2 android rom with no recovery just factory safe mode through which I can perform some tasks.
If you need any pics or any info just tell me in the comments.
I hope you guys help me.... Been trying for the last 6 days.
HELP ASAP SOS
Love,
Justin Biebar
Click to expand...
Click to collapse
Hey i have the same problem. Can you suggest me something regarding this.
A very big question
Hello! I have an argentine copy of the M3, called Hyundai Ultra Energy, same processor, same storage, camera quality, all in the same place. My question is how do I install a custom rom and how do I flash the recovery at first. I use adb commands, but I know that I have to do it with spflash. How is the process? I download the rom, charge the scatter and tilt only in recovery? Would be dangerous? Is more safe to root with King Root?
Hello gentlemen,
I am a victim of Samsung latest update for the Galaxy S8 which made my phone being stuck in a reboot loop. The only solution seems to be a factory reset
I would really love to be able to backup my files first so I googled quite a while on how to do it.
I think it should work when booting the phone into recovery mode and then enable the ADB mode and then using adb from a PC to download files via USB.
My problem is:
I am in the recovery mode but as soon as I choose "Apply update from ADB" then I see a printout "stopping adbd..." and then the phone restarts (again into recovery mode). Is this expected? I was hoping to get in a mode where the phone is detected by the PC as a USB device so I can start using adb.
Any help is really appreciated!
After some hours of googling and reading it seems it actually is a problem and not intended.
I ended up flashing the previous version (AQL5) using Odin to see if it might help in any way. The flashing worked but then after booting the device complained about broken data and wanted a factory reset. So I did that
Bye bye my data... thanks Samsung...