## I TAKE NO RESPONSIBILITY IF YOU BRICK YOU DEVICE##
So Im sharing some custom BOOTLOGO.BIN that I have made to remove the unlock boot-loader warring
for the Moto X4 with the latest logo.bin file form the latest update
i have tested them on my owen device
the zip file has a flash.bat included for a/b only logo.bin files for Havoc (will make more/custom if asked)
or
you cant flash manually via fastboot if your (UNLOCKEDBL)with stock recovery
reboot in to boot-loader mode
extra zip file
fastboot flash logo (logo you pick).bin
fastboot reboot
and to set manually swap from AorB slot
fastboot set_active other
I hope you like and enjoy
new test update has a new logo in bootloader mode
let me know what you think keep in mind this is a test changes will be made
new full logo mod (flashlogo.bat file in zip)
**new full logo mod**
custom logo bin
custom bootloader logo
and tab,arrows keys new look
NOW WE ARE MAKING BOO ANIMATIONS WITH IN SOME OF THE LOGO'S
ALL TWRP FLASH-ABLE
PLEASE LOOK HERE
One's that i made for far
Also check out
A fellow devs work havoc A is all thanks to him
https://photos.app.goo.gl/tkikcftmRdapXrjX7
AWESOME UPDATE WE NOW HAVE A TWRP FLASH-ABLE ZIP
THANK TO (ander38122) WITH OUT HIS HELP THIS WOULDN'T BE POSSIBLE
its under payton.zip
i have new update i have made a twrp zip that now flashes 2 different logo on each slot so you can tell them apart
PLEASE IF YOU WANT OR NEED HELP WITH A CUSTOM TWRP LOGO FILE PLEASE CONTACT!
Also join in on the NEW GROUP channel
share you own Custom Logo's/Wallpaper's,Get help, tips, an updates
NEW FILES/UPDATE BIN ZIP WILL BE HERE
[]
great job...
munchy_cool said:
great job...
Click to expand...
Click to collapse
Thanks
I've seen this talked about but I didn't really get it.
Is this twrp flsshable? Or do like normal? Your OG post says "can't" in fastboot so that's where I'm getting lost
stovo06 said:
I've seen this talked about but I didn't really get it.
Is this twrp flsshable? Or do like normal? Your OG post says "can't" in fastboot so that's where I'm getting lost
Click to expand...
Click to collapse
At this point there fastboot flashable only
I'm currently work out the bugs with twrp flashable zip
But I'll keep make up dates
and post them as soon as i get the bugs out
FizzyAps said:
At this point there fastboot flashable only
I'm currently work out the bugs with twrp flashable zip
But I'll keep make up dates
and post them as soon as i get the bugs out
Click to expand...
Click to collapse
Got any instructions? Been following a bit in telegram. I'm sure there be a twrp soon and I'm sure it isn't that hard, but a few details can go a long way.
stovo06 said:
Got any instructions? Been following a bit in telegram. I'm sure there be a twrp soon and I'm sure it isn't that hard, but a few details can go a long way.
Click to expand...
Click to collapse
Extract anyone of the zip flash manually via bootloader mode by running the commands
fast food flash logo (the one you pick).bin
The new full mod contains a flashlogo.bat already
Simply boot into bootloader and run bat file and enjoy
Same for the A/B havoc logo.bin have made a simple bat file for them as well
Now for the twrp side of thing I keep running in to error(6)
No matter how I reconfigure
Reaching out to another Dev that might be able to help me reconfigure
Cool Brother, this Havoc Bootlogo was me I created, you just grabbed from my album https://photos.app.goo.gl/tkikcftmRdapXrjX7
ander38122 said:
Cool Brother, this Havoc Bootlogo was me I created, you just grabbed from my album https://photos.app.goo.gl/tkikcftmRdapXrjX7
Click to expand...
Click to collapse
I linked it to you album and I also tweaked it little
FizzyAps said:
I linked it to you album and I also tweaked it little
Click to expand...
Click to collapse
OK, Leaves the album of Wallpapers linked to your post, anything calls me on the telegram
https://t.me/ander38122, I Can send the files soon. bin that I created also
ander38122 said:
OK, Leaves the album of Wallpapers linked to your post, anything calls me on the telegram
:good:, I Can send the files soon. bin that I created also
Click to expand...
Click to collapse
you might want to remove this so ppl dont blow you up
Twrp is a go already? Dam you on it. Which file and is it OK to flash over my bin logo I already have?
stovo06 said:
Twrp is a go already? Dam you on it. Which file and is it OK to flash over my bin logo I already have?
Click to expand...
Click to collapse
there a link to one that are twrp flashable and yes
you can flash with no wipe
FizzyAps said:
there a link to one that are twrp flashable and yes
you can flash with no wipe
Click to expand...
Click to collapse
Worked! There's a black screen for a few seconds but other than that, perfect!
Love to make my own. Hint hint ?
---------- Post added at 04:44 PM ---------- Previous post was at 04:39 PM ----------
BTW, One issue I've had since I fastboot the first time (a bin file, can't say it was from a zip file), TWRP has not been able to do a backup. Fails everytime at system image.
At one point it wouldn't reboot to the rom. Kept going back to TWRP. Eventually I just flashed a new ROM (which I was about to anyway thus the reason for the backup).
Edit; haven't tried since I flashed this new one.
stovo06 said:
Worked! There's a black screen for a few seconds but other than that, perfect!
Love to make my own. Hint hint
---------- Post added at 04:44 PM ---------- Previous post was at 04:39 PM ----------
BTW, One issue I've had since I fastboot the first time (a bin file, can't say it was from a zip file), TWRP has not been able to do a backup. Fails everytime at system image.
At one point it wouldn't reboot to the rom. Kept going back to TWRP. Eventually I just flashed a new ROM (which I was about to anyway thus the reason for the backup).
Edit; haven't tried since I flashed this new one.
me and the other dev will look into this issue
and as for the black screen issue we are working on it please try this attached file via twrp and let me know
Click to expand...
Click to collapse
FizzyAps said:
me and the other dev will look into this issue
and as for the black screen issue we are working on it please try this attached file via twrp and let me know
Click to expand...
Click to collapse
Same as previous. About a 2-3 second black screen.
Don't know if it matters but someone on telegram (didn't get an opportunity to read into it at the time) mentioned a bat file (but I think that may have been about TWRP).
And just outta curiosity, this stuff has progressed faster than myself. Is it necessary to remove security settings anytime I flash something? Have been just in case but I don't thing I do, just wanted confirmation if you have time
stovo06 said:
Same as previous. About a 2-3 second black screen.
Don't know if it matters but someone on telegram (didn't get an opportunity to read into it at the time) mentioned a bat file (but I think that may have been about TWRP).
And just outta curiosity, this stuff has progressed faster than myself. Is it necessary to remove security settings anytime I flash something? Have been just in case but I don't thing I do, just wanted confirmation if you have time
Click to expand...
Click to collapse
ok was it as bad??
and which group was this in please link me in to it
aslso no you shouldnt have to be but i do for testing
but it you want fast reply's,update,help,request,or anything like that please share and join the new grup on telegram
Related
Quick fast post. Fix it up later.
Unofficial TWRP for the SM-G360T1
Step 1:
You should know how to flash twrp by now.
Step 2:
Profit
Download link:
https://www.androidfilehost.com/?fid=24052804347820600
Known issues:
Usb otg not working. Will fix later.
Enjoy. Hit thanks or donate and all that good crap [emoji14]
Mine
THANK YOU ONCE AGAIN @ShinySide!!! Not only for root, but now for a working custom recovery. Truly the 2 most important tools we could have for our phone.
FOR EVERYONE ELSE:
As usual, be sure to give @ShinySide your Thanks/Donations/etc.!!! He deserves it! Also, now that you have TWRP you might be wondering what to do next. Here are a couple of suggestions of things that I've already done and that I am quite happy with.
1) Theme it! - Here are some themes you can try out that will not only make TWRP more beautiful, but also provide a layout that is more intuitive and user friendly. These are listed in a Galaxy S2 thread yes, but I've attached a picture of the one that I'm currently running and I'm happy to say that it works on our phone like a charm. I've also used these themes on other phones in the past. Just follow the instructions in the OP of that thread and give the guy some thanks on that thread if you like them. There is no risk in this btw. Either it works or it doesn't and to get rid of it if you don't like it you just have to delete the theme folder that you placed in TWRP. (Try to use the files that say "480x800" as that's the resolution of our screen.) Here is the link: http://forum.xda-developers.com/galaxy-s2-plus/themes-apps/theme-materialised-t2933979
2) Add the Xposed Framework - Go to this link here: http://forum.xda-developers.com/showthread.php?p=62377731
Then, install the Xposed app from the link on that thread. After that, you're going to want to pick the file attached to the OP of that thread that is called "xposed-v80.0-sdk22-arm-custom-build-by-wanam-20160211.zip" and save it to the root of your external SD card. (Do not download the one that says "ARM64" in it. Just the one I mentioned.) Then, just flash it via TWRP and reboot. You should now have the Xposed Framework installed. Once, again be sure to give the OP thanks on that thread too!
NOTE: After flashing Xposed it may hang on the MetroPCS screen on the next reboot for up to 15-20 mins or so while it's doing stuff. If it's any longer than that, then just pop the battery out and reboot. It will boot properly after that while it reoptimizes some apps.
OK something not right everytime I flash the twrp I keep getting the 2.8.70 instead of the version of This 2.8.1.0 one I need help cause everything is correct I keep getting that old version instead of this new version but twrp 2.8.7.0 still works good but I want the version right here
Deandre7452 said:
OK something not right everytime I flash the twrp I keep getting the 2.8.70 instead of the version of This 2.8.1.0 one I need help cause everything is correct I keep getting that old version instead of this new version but twrp 2.8.7.0 still works good but I want the version right here
Click to expand...
Click to collapse
2.8.7.0 is right. The picture I attached of my themed one I just downloaded from the theme thread because I couldn't take a screenshot from TWRP. Everything is good. No need to worry.
Thanks....glad to know that but everytime I reboot to system from twrp it keep going right back to the twrp instead of system that's what I worry about I have to keep flashing the kernel root cause the twrp not working right but ima get the theme to see what happens next
Deandre7452 said:
Thanks....glad to know that but everytime I reboot to system from twrp it keep going right back to the twrp instead of system that's what I worry about I have to keep flashing the kernel root cause the twrp not working right but ima get the theme to see what happens next
Click to expand...
Click to collapse
It shouldn't be doing that. Also, you should just make sure your TWRP is properly installed first before you do anything else to it. Maybe try rebooting your phone just by holding the power button once instead of selecting reboot system and see if it boots correctly then.
Sent from my SM-G360T1 using Tapatalk
I don't think it's right now I have the same picture frame u have in the picture but still not 2.8.1.0 at the top it have the 2.8.7.0 up there at the top of it and another thing is I can't flash anything everything else good but can't swipe to install so I need to get this right cause I don't be having problems with nothing else when I do stuff for my device
Deandre7452 said:
I don't think it's right now I have the same picture frame u have in the picture but still not 2.8.1.0 at the top it have the 2.8.7.0 up there at the top of it and another thing is I can't flash anything everything else good but can't swipe to install so I need to get this right cause I don't be having problems with nothing else when I do stuff for my device
Click to expand...
Click to collapse
Again, it is supposed to be 2.8.7.0 . Don't go by the picture I posted it was just a sample of what I had. Not a screenshot. Also, it doesn't need to look like mine to work. Theming it was just for fun and should only be done after you've successfully installed TWRP. Anyhow, try flashing this stock recovery file here. Then, boot into stock recovery and make sure you can still reboot to Android from there. If so, then go back and try flashing the TWRP recovery file again instead and see if that fixes the problem. No one else should flash this file by the way unless they are trying to go back to stock recovery for whatever reason. Thanks!
Sent from my SM-G360T1 using Tapatalk
Good job
Awesome! Goood job dude, can't wait till you write up the proper instructions. I'm a noob so don't want to do something wrong.
Another masterpiece By @shineside....
A great BIG Thank you @Bogarty For helping to bring this all together.
We have root, we have TWRP, and that's all thanks to @ShinySide! Great work!
Ok yall I just did a splash screen if anyone don't know but everyone have the color theme already go to the page here http://forum.xda-developers.com/android/themes/theme-twrp-materialised-dark-light-play-t2915584 scroll down to the change the recovery splash screen download the AIK file First when it finish flash it before anything download the splash set zip when it finish unzip that file then u download the trap kernel root are if u already have it on the device use any root explore renamed the tar.md5 to .img now go to recovery flash that AIK before you start anything hit where u change your theme color but click on change splash then u put the trap kernel.img on the first slot then the second slot click inside the splash set folder choose what color u want then flash it then there u go a new splash screen set......this for anyone that don't know
bogarty said:
It shouldn't be doing that. Also, you should just make sure your TWRP is properly installed first before you do anything else to it. Maybe try rebooting your phone just by holding the power button once instead of selecting reboot system and see if it boots correctly then.
Sent from my SM-G360T1 using Tapatalk
Click to expand...
Click to collapse
So, should this NOT work and it continues to reboot to TWRP what comes next? ? Ok, you got me. It continues to reboot into TWRP. I've never encountered this scenario before (granted I've never flashed a custom recovery via ODIN before either, but it went as expected up until I did a backup and tried to reboot into the system) and no, I didn't bother with trying to fancy up TWRP. I don't want TWRP looking unfamiliar. Any help would be greatly appreciated.
i am oblivion said:
So, should this NOT work and it continues to reboot to TWRP what comes next? Ok, you got me. It continues to reboot into TWRP. I've never encountered this scenario before (granted I've never flashed a custom recovery via ODIN before either, but it went as expected up until I did a backup and tried to reboot into the system) and no, I didn't bother with trying to fancy up TWRP. I don't want TWRP looking unfamiliar. Any help would be greatly appreciated.
Click to expand...
Click to collapse
Try flashing through ODIN again. Make sure you are in actual download mode (meaning don't use the option in TWRP, use the key combo), and flash it again.
Maybe we could get another youtube video? What do you say, "TheDerek"?
xRaZeR_FuZioNx said:
Try flashing through ODIN again. Make sure you are in actual download mode (meaning don't use the option in TWRP, use the key combo), and flash it again.
Click to expand...
Click to collapse
Ok, that's next on the agenda. Gonna take a walk and get myself calmed down before I resume troubleshooting. Thanks for the helpful and speedy response. And the bit about booting into Download Mode using the button combo over the TWRP option - I actually had no idea there was a difference there. I've gathered several boot/recovery zips and tars just in case and am tracking down the T-Mobile version of the g360t1 firmware as well (to cover all my bases, because when it rains it pours ?). Anyhow, I'll report back once I have something to report and thanks again guys ?
i am oblivion said:
Ok, that's next on the agenda. Gonna take a walk and get myself calmed down before I resume troubleshooting. Thanks for the helpful and speedy response. And the bit about booting into Download Mode using the button combo over the TWRP option - I actually had no idea there was a difference there. I've gathered several boot/recovery zips and tars just in case and am tracking down the T-Mobile version of the g360t1 firmware as well (to cover all my bases, because when it rains it pours ?). Anyhow, I'll report back once I have something to report and thanks again guys ?
Click to expand...
Click to collapse
i am oblivion said:
So, should this NOT work and it continues to reboot to TWRP what comes next? ? Ok, you got me. It continues to reboot into TWRP. I've never encountered this scenario before (granted I've never flashed a custom recovery via ODIN before either, but it went as expected up until I did a backup and tried to reboot into the system) and no, I didn't bother with trying to fancy up TWRP. I don't want TWRP looking unfamiliar. Any help would be greatly appreciated.
Click to expand...
Click to collapse
It has to be something you guys are doing during the flashing process that is causing it to boot into TWRP instead of Android. I would try flashing the Trapkernel again from download mode to see if that gives you boot, then if so, try flashing TWRP again. Both should be flashed in AP slot of ODIN. Make sure OEM Unlocking is checked in developer options, etc.
If that doesn't work and it still boots to TWRP, then you may have messed something up in there somehow. Try flashing back stock boot and stock recovery and make sure boot and stock recovery were restored. Once that's working, then you can try reflashing Trapkernel and TWRP. Use this link for more info on restoring your phone and for links to the stock files if you need them.
http://forum.xda-developers.com/showthread.php?p=62906680
Sent from my SM-G360T1 using Tapatalk
Theres a problem, I cant moutn system in Twrp and because of that i cant update SU binary and some apps dont work :/
cmurder61 said:
Theres a problem, I cant moutn system in Twrp and because of that i cant update SU binary and some apps dont work :/
Click to expand...
Click to collapse
Try reinjecting TWRP using the option in settings.
IT IS NO LONGER POSSIBLE TO CHANGE THE BOOT LOGO ON ROMS RELEASED FROM APRIL AND ONWARDS.
PLEASE READ THIS 1ST POST FULLY AND UNDERSTAND IT BEFORE REQUESTING A BOOT LOGO.
THINGS LIKE "CAN YOU DO THIS ONE" IS ABOUT AS MUCH USE AS A HANDBRAKE ON A HORSE.
I NEED TO KNOW WHETHER IT IS RK3066 or RK3188, THE DATE THE ROM WAS RELEASED AND THE RESOLUTION (800x480 or 1024x600)
Malaysk has been very kind to allow me to offer the service of changing the 1st boot logo and Recovery Mode logo to anyone using his great rom.
If you are using a different I can still do it, I will just need a link to download the rom.
If you want to have the 1st boot logo changed just give me a link to the image you want to use or add it to a zip file and add it as an attachment to your post.
I will also need to know the exact Malaysk rom version you are using (RK***, Resolution, Date of Rom)
The only down side to offering this service is it will mean you have to completely re-install the rom but you won't have to do a wipe so you won't lose any installed apps or settings.
I have tested extensively on my head unit with no problems but with any rom or mod you install at your own risk.
NOTE: If you find that you don't have root, just go to Factory Settings and enter code *#hct#root#
If you also want ADB enabled as well go back to Factory settings and enter code adbon
NOTE 2: The 1st Boot Logo and Recovery Mode Logo ARE NOT ANIMATED
Attached are some examples
Full list of completed boot logos
RK3066
alfa_800X480_RK3066_37_MAL_17_03_2016.rar
bmw_800X480_RK3066_37_MAL_17_03_2016.rar
bmw_800X480_RK3066_38_MAL_23_04_2016.rar
corolla_800X480_RK3066_37_MAL_17_03_2016.rar
ford_800X480_RK3066_37_MAL_17_03_2016.rar
ford_800X480_RK3066_38_MAL_23_04_2016.rar
hyundai_800X480_RK3066_37_MAL_17_03_2016.rar
toyota_moving_forward_800X480_RK3066_37_MAL_17_03_2016.rar
toyota_moving_forward_1024X600_18_RK3066_MAL_17_03_2016.rar
venza_1024X600_19_RK3066_MAL_19_04_2016.rar
vw_800X480_RK3066_37_MAL_17_03_2016.rar
RK3188
audi_800X480_RK3188_14_MAL_17_03_2016.rar
audi_mmi_800X480_RK3188_15_MAL_23_04_2016.rar
bmw_boo_RK3188_1024x600_2016-03-12_v1.0.0.rar booroondook Rom
chevrolet_800X480_RK3188_14_MAL_17_03_2016.rar
corvette_1024X600_RK3188_16_MAL_17_03_2016.rar
ford_1024X600_RK3188_15_MAL_09_03_2016.rar
ford_1024X600_RK3188_16_MAL_17_03_2016.rar
ford_1024X600_RK3188_17_MAL_23_04_2016.rar (with Ford boot animation (bootanimation_dancing_droids.zip))
hyundai_800X480_RK3188_14_MAL_17_03_2016.rar
hyundai_bluelink_1024X600_RK3188_16_MAL_17_03_2016.rar
hyundai_bluelink_boo_2016-0-3-12_v1.0.0.rar
mazda2_1024X600_RK3188_16_MAL_17_03_2016.rar
opel_800X480_RK3188_14_MAL_17_03_2016.rar
suzuki_800X480_RK3188_14_MAL_17_03_2016.rar
toyota_moving_forward_800X480_RK3188_14_MAL_17_03_2016.rar
Toyota_Moving_Forward_1024X600_RK3188_14_MAL_12_02_2016.rar
VW_1024X600_RK3188_15_MAL_09_03_2016.rar
vw_1024X600_RK3188_16_MAL_17_03_2016.rar
vw_1024X600_RK3188_17_MAL_23_04_2016.rar
vw_JY_rk3188_h(20160222).rar Joying Stock Rom
Cheers,
Goose
Toyota - Moving Forward
Dear @Goose247, thank you in advance for your efforts.
Here I'm attaching the "Toyota - Moving Forward" logo, which would look very nice when booting in the 2008 Toyota Yaris. (that was Toyota's slogan between 2004-2012, when this car was made).
It's simple and aesthetic, and looks very professional, in my opinion. No super-fancy stuff needed during that first couple of seconds.
I attached both JPG and PNG, PNG is better quality, use whichever you can.
I'm using Malaysk's 4_4_4_800X480_RK3066 image.
robertut said:
Dear @Goose247, thank you in advance for your efforts.
Here I'm attaching the "Toyota - Moving Forward" logo, which would look very nice when booting in the 2008 Toyota Yaris. (that was Toyota's slogan between 2004-2012, when this car was made).
It's simple and aesthetic, and looks very professional, in my opinion. No super-fancy stuff needed during that first couple of seconds.
I attached both JPG and PNG, PNG is better quality, use whichever you can.
I'm using Malaysk's 4_4_4_800X480_RK3066 image.
Click to expand...
Click to collapse
What date rom are you using?
Now I'm using update_4_4_4_800X480_RK3066_31_MAL_09_12_2015, but I plan to re-flash my unit later to update_4_4_4_FUSE_800X480_RK3066_35_MAL_13_02_2016.
robertut said:
Now I'm using update_4_4_4_800X480_RK3066_31_MAL_09_12_2015, but I plan to re-flash my unit later to update_4_4_4_FUSE_800X480_RK3066_35_MAL_13_02_2016.
Click to expand...
Click to collapse
Ok, to make things simple I will add the new boot logo to the latest rom for you so when you flash it, just flash it as per Malaysk's instructions for that version.
Boot logo has been done, just uploading to server. Will let you know when it is available for download :good:
Here is the link for Toyota Moving Forward Toyota_Moving_Forward_800X480_RK3066_35_MAL_13_02_2016.rar
I use 2 different methods to re-build the rom, 1 of them for some reason loses root and I have no idea why but if you find that you don't have root, just go to Factory Settings and enter code *#hct#root#
If you also want ADB enabled as well go back to Factory settings and enter code adbon
I have also used the same image for going into recovery but added "Recovery Mode" at the bottom of the logo.
I really need to figure out which method doesn't lose root for future reference
Take a photo and upload once you are up and running.
Can you share only .img file you modified? Which one is it?
- boot.img
- misc.img
- oem.img
- system.img
- kernel.img
- recovery.img
- RK30xxLoader(L)_V2.19.bin
???
Can you add this Chevy symbol please to update_4_4_4_FUSE_800X480_RK3188_12_MAL_13_02_2016? Thanks.
http://www.car-brand-names.com/wp-content/uploads/2015/08/Chevrolet-logo-3.jpg
robertut said:
Can you share only .img file you modified? Which one is it?
- boot.img
- misc.img
- oem.img
- system.img
- kernel.img
- recovery.img
- RK30xxLoader(L)_V2.19.bin
???
Click to expand...
Click to collapse
Yeah sure. I will upload them. They are kernel and recovery.
Here is the link to just the kernel and recovery. Toyota_Moving_Forward_800X480_Boot_Logo.rar
MayfairDROID said:
Can you add this Chevy symbol please to update_4_4_4_FUSE_800X480_RK3188_12_MAL_13_02_2016? Thanks.
http://www.car-brand-names.com/wp-content/uploads/2015/08/Chevrolet-logo-3.jpg
Click to expand...
Click to collapse
Just uploading now. Will be available soon :good:
MayfairDROID said:
Can you add this Chevy symbol please to update_4_4_4_FUSE_800X480_RK3188_12_MAL_13_02_2016? Thanks.
http://www.car-brand-names.com/wp-content/uploads/2015/08/Chevrolet-logo-3.jpg
Click to expand...
Click to collapse
Chevy done. Chevrolet_800X480_RK3188_12_MAL_13_02_2016.rar
Its probably safe to say that all the major car makes would enjoy one.
Do you want a Honda one done? If so I need to know the exact firmware you are using.
Cheers,
Tam
You are the man when i get paid im sending coffee and donuts ur way lol...im using the latest malaysk feb 13th firmware and i have a res of 800x480 much appreciated brother below is the link ...gonna look dope
http://2.bp.blogspot.com/-Pwlujsk6DTU/USdHnu2j7fI/AAAAAAAAB7I/O_EeHyNDBaM/s1600/Hyundai-Logo.jpg
Goose247 said:
Here is the link for Toyota Moving Forward Toyota_Moving_Forward_800X480_RK3066_35_MAL_13_02_2016.rar
I use 2 different methods to re-build the rom, 1 of them for some reason loses root and I have no idea why but if you find that you don't have root, just go to Factory Settings and enter code *#hct#root#
If you also want ADB enabled as well go back to Factory settings and enter code adbon
I have also used the same image for going into recovery but added "Recovery Mode" at the bottom of the logo.
I really need to figure out which method doesn't lose root for future reference
Take a photo and upload once you are up and running.
Click to expand...
Click to collapse
I installed it, looks great! Thanks.
It indeed looses root, but entering root codes as you suggested restores root functionality properly. I'll post a photo later.
robertut said:
I installed it, looks great! Thanks.
It indeed looses root, but entering root codes as you suggested restores root functionality properly. I'll post a photo later.
Click to expand...
Click to collapse
Yeah I must have used the other method of 2 for re-building the rom and the best of it is I can't even remember what method I used to re-pack your now lol.
wcbray said:
You are the man when i get paid im sending coffee and donuts ur way lol...im using the latest malaysk feb 13th firmware and i have a res of 800x480 much appreciated brother below is the link ...gonna look dope
http://2.bp.blogspot.com/-Pwlujsk6DTU/USdHnu2j7fI/AAAAAAAAB7I/O_EeHyNDBaM/s1600/Hyundai-Logo.jpg
Click to expand...
Click to collapse
3066 or 3188? Was just about to upload it then realised that I had done it for 3188
3188 is corrent my man thank abunch broski
Im excited for the link
wcbray said:
3188 is corrent my man thank abunch broski
Im excited for the link
Click to expand...
Click to collapse
How is that for timing. Upload just finished.
Hyundai_800X480_RK3188_12_MAL_13_02_2016.rar
Install as a normal update, don't wipe anything. Once it has rebooted can you check to see if you still have root? I think I used the correct method this time.
If not follow the instructions on the 1st post.
Goose247 said:
How is that for timing. Upload just finished.
Hyundai_800X480_RK3188_12_MAL_13_02_2016.rar
Install as a normal update, don't wipe anything. Once it has rebooted can you check to see if you still have root? I think I used the correct method this time.
If not follow the instructions on the 1st post.
Click to expand...
Click to collapse
You did a fantastic job and i did not lose root at all it was flawless keep up the good work my man i will be keeping this rom a quite some time now because you u
---------- Post added at 07:42 PM ---------- Previous post was at 07:07 PM ----------
Hey goose you don't know how to rezise widgets or launchers do you?
So out of curiosity I went to the ZTE USA website and checked when the next batch of Axon 7's would ship as I wanted to buy another one (don't judge) and I go down to Support, Software updates, and I see this(attached):
Is this the stock image that ZTE said they would post? It sure looks like it as its almost 2GB in size
Link: https://www.zteusa.com/axon-7
Thanks for the heads-up. Interesting that they would post an image for B20, not one of a later version.
xtermmin said:
Thanks for the heads-up. Interesting that they would post an image for B20, not one of a later version.
Click to expand...
Click to collapse
What's interesting is that they haven't announced it yet
This looks like the factory image of the B20 pre-bootloader. I'm downloading the zip now, so we'll know more after analysts. So much about getting B27 or B29 as factory, but makes sense since that's where the sig change happened. And it specifically mentions it as image for fixing OTA failures because of B20_Boot OTA
It could be what we have been hoping for - at least that is a factory image. We can always use their OTA system to update from there
---------- Post added at 09:26 PM ---------- Previous post was at 08:56 PM ----------
DrakenFX - check this out here. I just downloaded it and took a look at the updater script in it. This may help with an instruction set for turning future OTA updates into TWRP flashable zips.
we need to get this updated here:
http://forum.xda-developers.com/axon-7/development/axon-7-chinese-stock-roms-t3436817
Well what do you know its announced: https://community.zteusa.com/thread/13133
bkores said:
Well what do you know its announced: https://community.zteusa.com/thread/13133
Click to expand...
Click to collapse
So with this image, how would you flash it to a bricked phone? Do you have to have access to recovery to use the file as posted?
Nice find @bkores , posted on the 10/26 .....still this can be very helpful
imp3r10 said:
So with this image, how would you flash it to a bricked phone? Do you have to have access to recovery to use the file as posted?
Click to expand...
Click to collapse
I guess you do as you have to update from the sd card. I don't know why they couldn't have made it fastboot flashable but you should be able to flash the boot and recovery inside the zip with fastboot. As for the system I think you can convert the system.new.dat to system.img with some program and then flash. Someone feel free to correct me on this.
Can devs start "cooking" this? Removing stock apps etc etc?
bkores said:
I guess you do as you have to update from the sd card. I don't know why they couldn't have made it fastboot flashable but you should be able to flash the boot and recovery inside the zip with fastboot. As for the system I think you can convert the system.new.dat to system.img with some program and then flash. Someone feel free to correct me on this.
Click to expand...
Click to collapse
This is basically a full (not-OTA) update file for B20 version. It is really only good for downgrades to fix soft brick where your recovery is still accessible or to get OTAs. It will not help with bricks where phone won't boot past ZTE logo or into fastboot. It will also not help with stock mods since zip file is signed. And it cannot be flashed via EDL or DFU mode. I hope this is not the thing they were talking about when they posted that meme with brick wall and stock market recovery.
For fastboot restore, we would need new fastboot image, since i think there is a flash (or pull) limit on file size in the current one around 500MB or so IIRC
---------- Post added at 03:49 PM ---------- Previous post was at 03:41 PM ----------
nsane said:
Can devs start "cooking" this? Removing stock apps etc etc?
Click to expand...
Click to collapse
Since this is a signed zip, there is no modifying it. Flashing modded rom would still require TWRP and could already be done since we have full /system dumps. And to use this to save you from bad flash, you will need to have access to recovery. TWRP could flash it i guess, but if you are in bootloader loop then not much help
This will remove the unlocked bootloader from your device at this time
Click to expand...
Click to collapse
I'm guessing this is because it replaces the emmc_appsboot.mbn / aboot file? Wonder if one can just delete that line from the flashing script to keep it unlocked.
peramikic said:
This is basically a full (not-OTA) update file for B20 version. It is really only good for downgrades to fix soft brick where your recovery is still accessible or to get OTAs. It will not help with bricks where phone won't boot past ZTE logo or into fastboot. It will also not help with stock mods since zip file is signed. And it cannot be flashed via EDL or DFU mode. I hope this is not the thing they were talking about when they posted that meme with brick wall and stock market recovery.
For fastboot restore, we would need new fastboot image, since i think there is a flash (or pull) limit on file size in the current one around 500MB or so IIRC
---------- Post added at 03:49 PM ---------- Previous post was at 03:41 PM ----------
Since this is a signed zip, there is no modifying it. Flashing modded rom would still require TWRP and could already be done since we have full /system dumps. And to use this to save you from bad flash, you will need to have access to recovery. TWRP could flash it i guess, but if you are in bootloader loop then not much help
Click to expand...
Click to collapse
If you are stuck on the ZTE logo on a bootloop, couldn't you use tenfar's tool to flash stock recovery and then use this full image to flash stock B20? It does have a boot.img in it that it installs during this process.
peramikic said:
This is basically a full (not-OTA) update file for B20 version. It is really only good for downgrades to fix soft brick where your recovery is still accessible or to get OTAs. It will not help with bricks where phone won't boot past ZTE logo or into fastboot. It will also not help with stock mods since zip file is signed. And it cannot be flashed via EDL or DFU mode. I hope this is not the thing they were talking about when they posted that meme with brick wall and stock market recovery.
For fastboot restore, we would need new fastboot image, since i think there is a flash (or pull) limit on file size in the current one around 500MB or so IIRC
---------- Post added at 03:49 PM ---------- Previous post was at 03:41 PM ----------
Since this is a signed zip, there is no modifying it. Flashing modded rom would still require TWRP and could already be done since we have full /system dumps. And to use this to save you from bad flash, you will need to have access to recovery. TWRP could flash it i guess, but if you are in bootloader loop then not much help
Click to expand...
Click to collapse
I am bootloader unlock and have TWRP.
I hope that Devs start "cooking" stock ROMS. Taking out system apps. Bloat etc etc
Kernel development would also be nice
*fingers crossed*
I'm really happy that they did something, but why couldn't they have just compressed the boot, recovery, and system img files into a tar file like Google does with their Nexus/Pixel devices? That way we would've been able to flash them in fastboot mode which could've fixed almost any brick with the exception of EDL/DFU mode in which case we could have used tenfar's tool.
If you remove this from the updater-script inside the update.zip, it is even flashable with TWRP takes some time to flash but it works!
Code:
getprop("ro.product.device") == "ailsa_ii" || abort("This package is for \"ailsa_ii\" devices; this is a \"" + getprop("ro.product.device") + "\".");
assert(getprop("ro.product.name") == "P996A01");
ui_print("Target: ZTE/P996A01/ailsa_ii:6.0.1/MMB29M/20160707.171254:user/release-keys");
show_progress(0.850000, 180);
i believe i mention this somewhere, been crazy busy for me today
* You can either Flashed using TWRP or Install using Stock System Update app or Install using Stock recovery.
but that B20 update.zip will get you to Complete B20 software.
Click to expand...
Click to collapse
beside that here are a few good point of what is going to happen :
-However you will not be able to update to newer builds just yet.
-SD card update will erase everything on your device. (but i'm sure External Storage (SDCard) is safe )
-We recommend only users with advanced skills use this file.
Click to expand...
Click to collapse
so anyone who want to use that file need to take that in consideration.
DrakenFX said:
i believe i mention this somewhere, been crazy busy for me today
beside that here are a few good point of what is going to happen :
so anyone who want to use that file need to take that in consideration.
Click to expand...
Click to collapse
You can just remove the format line inside the updater-script to keep your data
bkores said:
You can just remove the format line inside the updater-script to keep your data
Click to expand...
Click to collapse
LoL, just notice that line ....haven't had time to bother and check the file , but yeah just need to remove
Code:
format("ext4", "EMMC", "/dev/block/bootdevice/by-name/userdata", "0", "/data");
but still, internal storage will be is safe but you'll still need to wipe data and reinstall app (Encryption thing)
XDA:DevDB Information
[STOCK] Official Moto G5 Cedric firmwares [TWRP], ROM for the Moto G5
Contributors
Livi-Tech
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.x
ROM Firmware Required: TWRP or TWRP 64 bit
Based On: Stock
Version Information
Status: Testing
Created 2018-02-03
Last Updated 2018-02-03
--Requirements--
TWRP or TWRP 64 bit
--Downloads--
( waiting for upload )
--Setting up--
Power off your Moto G5 device
hold volume down and power button to boot into bootloader
press volume down twice till it says RECOVERY MODE
press the power button to select
wait for twrp to start up
tap wipe
tap advanced wipe
tap Dalvik / ART cache
tap System
tap Data
tap Cache
drag the blue arrow to the right to wipe
tap back
tap the <I button to go back
tap the <I again to go back
--Installing--
tap Install
tap select storage
tap internal storage or sd card depending where you downloaded your twrp zip file
tap the zip file
drag the blue arrow to the right to confirm flash
( Testing Status by the way, i've only tested on my device so would like some others to test this method, if something does go wrong I have a Fastboot install method that has been confirmed working on different variations of the G5 Cedric
What's the point of this? Does it do something different?
aaronboy205 said:
What's the point of this? Does it do something different?
Click to expand...
Click to collapse
TWRP is a portable way
some people are scared of using fastboot + this way they can keep twrp without the firmware not liking it + the TWRP installation is much faster but this method is mainly for people who want to keep twrp without needing to modify anything, are scared of fastboot or want to do a quick install
aaronboy205 said:
What's the point of this? Does it do something different?
Click to expand...
Click to collapse
Sometimes people don't want to do all the steps for going back to stock so having a flashable zip it's a bit faster and easier.
@Livi-Tech when I did flashable stock people had issues getting zip booted so I disabled dm verity and force encrypt from kernel but you can attach this to the main post so people don't run into the same issues.
https://build.nethunter.com/android-tools/no-verity-opt-encrypt/no-verity-opt-encrypt-6.0.zip
Fedray said:
Sometimes people don't want to do all the steps for going back to stock so having a flashable zip it's a bit faster and easier.
Click to expand...
Click to collapse
It is, I wouldn't create something that didn't have a point to it, me personally I hate using fastboot because watching all the commands run kind of scares me a bit knowing something could go wrong
Fastboot
1) got to connect usb cable, open up command prompt, make sure the device is recognized
2) wrong command could mess stuff up
3) take ages
4) got to type in loads of commands
TWRP
1) portable method
2) automatic install
3) system doesn't play if you make modifications, flash any system modifying files, etc
4) much much faster than fastboot by miles
Fedray said:
Sometimes people don't want to do all the steps for going back to stock so having a flashable zip it's a bit faster and easier.
@Livi-Tech when I did flashable stock people had issues getting zip booted so I disabled dm verity and force encrypt from kernel but you can attach this to the main post so people don't run into the same issues.
https://build.nethunter.com/android-tools/no-verity-opt-encrypt/no-verity-opt-encrypt-6.0.zip
Click to expand...
Click to collapse
My TWRP versions have boot.img files with dm-verity already turned off and disabled, thank you though
Livi-Tech said:
TWRP is a portable way
some people are scared of using fastboot + this way they can keep twrp without the firmware not liking it + the TWRP installation is much faster but this method is mainly for people who want to keep twrp without needing to modify anything, are scared of fastboot or want to do a quick install
Click to expand...
Click to collapse
Oh okay thanks! ?
WAITING
I´m waiting for this.
Download links ??
Reserve threads arent allowed on xda afaik. Hurry up or thread gets blocked
Sonisudhanshu said:
Download links ??
Click to expand...
Click to collapse
My internet cut out last night so still uploading
I'm uploading directly to XDA that's why no download links are available yet
Thread closed, place holders NOT permitted. PM me when you are ready to post a download link.
Waiting download link yet... :/
Do you have link to this firmware please?
jason13v8 said:
Do you have link to this firmware please?
Click to expand...
Click to collapse
I already have a fastboot tutorial
go onto my profile
click on thread started by livi-tech
you should find one that says official moto G5 Cedric firmwares [Fastboot]
jason13v8 said:
Do you have link to this firmware please?
Click to expand...
Click to collapse
I'm shutting this thread down for a while
unless there is someone willing to test my twrp version
Livi-Tech said:
I'm shutting this thread down for a while
unless there is someone willing to test my twrp version
Click to expand...
Click to collapse
I'll look for link to twrp version and test it for you today. There's already a debloated stock zip file here on XDA I flashed yesterday. I'll let you know how it goes thanks
---------- Post added at 09:44 AM ---------- Previous post was at 09:35 AM ----------
Livi-Tech said:
I'm shutting this thread down for a while
unless there is someone willing to test my twrp version
Click to expand...
Click to collapse
You don't seem to have a twrp version for me to test, the only one I see in your profile is fastboot which I avoid at all cost.
jason13v8 said:
I'll look for link to twrp version and test it for you today. There's already a debloated stock zip file here on XDA I flashed yesterday. I'll let you know how it goes thanks
---------- Post added at 09:44 AM ---------- Previous post was at 09:35 AM ----------
You don't seem to have a twrp version for me to test, the only one I see in your profile is fastboot which I avoid at all cost.
Click to expand...
Click to collapse
why do you avoid fastboot ( I already know some reasons someone might but curious about your reasons )
you've used fastboot before to unlock bootloader?
I've even tried fastboot erase all and all it wiped was data, System, cache so my device was perfectly okay,the Moto G5 bootloader seems more protected than other phones
and no I don't I was going to upload one but I bumped into problems on my device ( unrelated )
Livi-Tech said:
why do you avoid fastboot ( I already know some reasons someone might but curious about your reasons )
you've used fastboot before to unlock bootloader?
I've even tried fastboot erase all and all it wiped was data, System, cache so my device was perfectly okay,the Moto G5 bootloader seems more protected than other phones
and no I don't I was going to upload one but I bumped into problems on my device ( unrelated )
Click to expand...
Click to collapse
I have used fastboot a few times with sumsung devices but at present I have windows 10 and seem to get nowhere with it and yes I unlocked my bootloader I used one click root company to root and flash twrp £29 i think it's an XDA set up thing you give them permission to take over your computer and even their engineer nearly gave up after about 2 hours. I have used kingroot and Odin many time and persisted until success but with Moto G5 I surrendered and got help for the sake of time and energy. Plus your original post I thought said it was for people who struggle with fastboot. Like I said there is a stock zip available and it worked via twrp. If you can't upload them should you not delete the thread? Thanks:good:
jason13v8 said:
I have used fastboot a few times with sumsung devices but at present I have windows 10 and seem to get nowhere with it and yes I unlocked my bootloader I used one click root company to root and flash twrp £29 i think it's an XDA set up thing you give them permission to take over your computer and even their engineer nearly gave up after about 2 hours. I have used kingroot and Odin many time and persisted until success but with Moto G5 I surrendered and got help for the sake of time and energy. Plus your original post I thought said it was for people who struggle with fastboot. Like I said there is a stock zip available and it worked via twrp. If you can't upload them should you not delete the thread? Thanks:good:
Click to expand...
Click to collapse
I need someone to test ( not just the normal it boots up test because I already know it boots up and everything works )
My bootloader already says status: modified and right now I have an IMEI problem which is preventing me from making and receiving calls/texts, I won't upload my versions until I know they aren't going to trip the bootloader status or cause the same call/text problems I have for people who flash it
which is why i'm looking for a tester who doesn't care if their bootloader changes from official to modified and doesn't care if they lose ability to call and text.
with your fastboot Issue, could you have a look on my instructions in my [fastboot] thread and tell me if you get fastboot to recognize your phone, i'm not asking you to flash anything, just asking if you could use those instructions and see if fastboot picks up your Moto G5, ( i'm curious as to why your having so much trouble as I am also on windows 10 ) also currently what rom are you using on your Moto G5?
Just whant to share dd backup I did who are test and working for at least BND-L21.
dd rip of official OTA 8.0.0.330.
If someone have need.
Cust.img : https://mega.nz/#!q9tn2C6T!JMMSDYN5qc4BQrmKwtjifGqg26Je8SjiToPBM7wktp4
Kernel.img : https://mega.nz/#!Kg8AADgJ!PmBFU4vM1nTvcJnT-AttXBvV7IIh93xdEPgSY9kE0BE
Product.img : https://mega.nz/#!zk8glLyJ!HIKFQoEMuShRYYvm3SWeIfmpLa3LrOI_ahpJ2PDFQXc
Ramdisk.img : https://mega.nz/#!WokUmYZJ!zusLmvamHNUfEVkzn-oEg3rescsnuPG29iRUlQM3E8M
Vendor.img : https://mega.nz/#!H5VnUJxZ!rSI4rg2Hy-cNn9-I1-dMt2y0MHq45ypu2MqL_OP7SZY
Version.img : https://mega.nz/#!q0d2ASiK!20PPaQcjevG_3Hzu1qeBS3ye6FnfG9pL6htA6vy5E8c
System.img : https://mega.nz/#!ShVTHRYJ!-Ha-K9UgKahc7KkRRSRHPkpuLSC4Yr0sZ_kCzEumRs0
If you don't use BND-L21 then use this files at your own risk.
it would have been nice
if files were on some other filehost.
plz share oeminfo too
kdark said:
plz share oeminfo too
Click to expand...
Click to collapse
Wiil try and do
U think it will work on L24?
A bit of context here - my device model is BND-L34 (Mate SE) and I had tried using a method that a user posted in a Mate SE specific thread that detailed how to manually update to Oreo.
Well, that failed miserably and I ended up with a bricked device. I had tried numerous different things to try and revive it (some that I had come up with on my own) and none of them worked. Then I thought to use Multi-Tool to unbrick it with a backup I had lying around but unfortunately it was a Nougat backup.
I had almost lost hope until stumbling upon this thread. I figured I had nothing else to lose so I decided to try to restore my phone with Multi-Tool and your backup files - all except for the system image because MEGA decided to **** block me due to it being a large file (you should definitely upload them elsewhere, by the way), so what I did was use a stock system image someone uploaded in the OpenKirin RROS thread along with the rest of your backup files.
I had also gotten a stock ramdisk_recovery.img file from somewhere else (forgot where but if anyone has trouble finding a stock recovery for Oreo I can upload mine). And VOILA (hope I spelled that right)! My device is back to life on Oreo and I couldn't be more happy.
SO all in all, even if you didn't intend for L34 users to use these files, I want to thank you!
System image I used (see post #2)
[url]https://forum.xda-developers.com/honor-7x/development/rom-t3765201[/URL]
(Screenshots below in a separate post)
Had to put them in a separate post if I didn't wanna go through the trouble of moving the screenshots to my PC and uploading them there
Thanks man, it's great..:good::good::good::good::good:
XandeR180 said:
A bit of context here - my device model is BND-L34 (Mate SE) and I had tried using a method that a user posted in a Mate SE specific thread that detailed how to manually update to Oreo.
Well, that failed miserably and I ended up with a bricked device. I had tried numerous different things to try and revive it (some that I had come up with on my own) and none of them worked. Then I thought to use Multi-Tool to unbrick it with a backup I had lying around but unfortunately it was a Nougat backup.
I had almost lost hope until stumbling upon this thread. I figured I had nothing else to lose so I decided to try to restore my phone with Multi-Tool and your backup files - all except for the system image because MEGA decided to **** block me due to it being a large file (you should definitely upload them elsewhere, by the way), so what I did was use a stock system image someone uploaded in the OpenKirin RROS thread along with the rest of your backup files.
I had also gotten a stock ramdisk_recovery.img file from somewhere else (forgot where but if anyone has trouble finding a stock recovery for Oreo I can upload mine). And VOILA (hope I spelled that right)! My device is back to life on Oreo and I couldn't be more happy.
SO all in all, even if you didn't intend for L34 users to use these files, I want to thank you!
System image I used (see post #2)
[url]https://forum.xda-developers.com/honor-7x/development/rom-t3765201[/URL]
(Screenshots below in a separate post)
Click to expand...
Click to collapse
plz share your ramdisk img file i tried to find it but didn't get it
XandeR180 said:
I had also gotten a stock ramdisk_recovery.img file from somewhere else (forgot where but if anyone has trouble finding a stock recovery for Oreo I can upload mine). And VOILA (hope I spelled that right)! My device is back to life on Oreo and I couldn't be more happy.
Click to expand...
Click to collapse
I would be very interested in the stock ramdisk_recovery, could you send me the link?
Is that L21 version Indian variant?
can i please get some help with unbricking my l24 variant. i have twrp installed but it says frp is locked. twrp says i have no os
Sonny1732 said:
can i please get some help with unbricking my l24 variant. i have twrp installed but it says frp is locked. twrp says i have no os
Click to expand...
Click to collapse
If twrp works, there is a patch file that you can use to unlock frp.
MOD EDIT: LINK REMOVED
Would be helpful to understand what caused this problem though.
mrmazak said:
If twrp works, there is a patch file that you can use to unlock frp.
MOD EDIT: LINK REMOVED
Would be helpful to understand what caused this problem though.
Click to expand...
Click to collapse
ive had installed twrp and magisk the night before and had the app call lspeed downloaded, the next morning i deleted the lspeed app and restarted the device and got stuck on a bootloop so i factory reseted and now i just get the first honor screen then it reboots to the hauwei erecovery
Sonny1732 said:
ive had installed twrp and magisk the night before and had the app call lspeed downloaded, the next morning i deleted the lspeed app and restarted the device and got stuck on a bootloop so i factory reseted and now i just get the first honor screen then it reboots to the hauwei erecovery
Click to expand...
Click to collapse
Ok. Some reason twrp does not good a good job with factory resets.
I suggest flash that frp unlock.zip
Then flash stock ramdisk.img and stock kernel.img.
That will remove magisk, for now anyway.
Then try to boot. If still not, then flash stock recovery and do factory reset. But if reset again locks frp. You will be stuck.
If you dont mind resetting from fresh system maybe just reflash with hurupdater or hwota, instead of flashing stock recovery.
mrmazak said:
Ok. Some reason twrp does not good a good job with factory resets.
I suggest flash that frp unlock.zip
Then flash stock ramdisk.img and stock kernel.img.
That will remove magisk, for now anyway.
Then try to boot. If still not, then flash stock recovery and do factory reset. But if reset again locks frp. You will be stuck.
If you dont mind resetting from fresh system maybe just reflash with hurupdater or hwota, instead of flashing stock recovery.
Click to expand...
Click to collapse
i dont mind at all resetting from fresh system how do i do that
Sonny1732 said:
i dont mind at all resetting from fresh system how do i do that
Click to expand...
Click to collapse
https://forum.xda-developers.com/honor-7x/how-to/guide-honor-7x-flash-oreo-update-t3781649
mrmazak said:
https://forum.xda-developers.com/honor-7x/how-to/guide-honor-7x-flash-oreo-update-t3781649
Click to expand...
Click to collapse
thank you, ill give it a try
---------- Post added at 09:03 AM ---------- Previous post was at 08:50 AM ----------
Sonny1732 said:
thank you, ill give it a try
Click to expand...
Click to collapse
i cant download the frp unlock.zip
Sonny1732 said:
thank you, ill give it a try
---------- Post added at 09:03 AM ---------- Previous post was at 08:50 AM ----------
i cant download the frp unlock.zip
Click to expand...
Click to collapse
Ok hold on
Should be this
https://mega.nz/#!nw0wAYoA!hYtf78s0AjwRCpPo_NQ2F4LYclngNBNurJNETypSNKQ
From @KingOfMezi
mrmazak said:
Ok hold on
Click to expand...
Click to collapse
i did the HuRUpdater_0.3.zip and now i can get to the just a sec screen after i select wifi during setup but now its stuck there