Help me (fake tablet) - Android Q&A, Help & Troubleshooting

Hello,
I bought this tablet :
https://www.ebay.com/itm/Plus-Recen...m43663.l10137&nordt=true&rt=nc&orig_cvip=true
CPUZ and DevCheck give me the same material as the datasheet :
https://imagizer.imageshack.com/img923/3621/brbU7P.png
https://imagizer.imageshack.com/img923/5386/YfIH6D.png
https://imagizer.imageshack.com/img922/6720/dBEEAH.png
https://imagizer.imageshack.com/img921/5500/hgLZZJ.png
https://imagizer.imageshack.com/img921/2778/9uEbYL.png
https://imagizer.imageshack.com/img921/4418/aRNats.png
https://imagizer.imageshack.com/img923/8682/v3Id9F.png
But everything is wrong ! For example it is supposed to be 128GB of internal memory, when I plug the tablet on a PC there is supposedly 115GB of free :
https://imagizer.imageshack.com/img923/1643/8i1iau.jpg
But when I copy 10.8GB above ... I only have 8.25GB left ! :
https://imagizer.imageshack.com/img924/6377/Ip7ZYh.jpg
https://imagizer.imageshack.com/img923/2821/4O5qtj.jpg
Is there an app that can give me the actual hardware of this tablet ?

Sad that these faked ones exist. You should make a complaint to ebay.
At least it wasn't that expensive.
Start it by holding Power and Volume Down down. It should go to the factory menu.
Using vols and power choose the version info, 版本信息 in Chinese.
Then you might get some info about the SoC at least.
About everything can be faked in these... if one is, then probably most of the specs are faked...
There is a way removing the faking data on proinfo partition but some of those values are needed...
Edit: Other factory menu items ---- Chinese - English (google translate)
工厂模式 - Factory mode
自动测试 - automatic testing
手动测试 - Manual test
单项测试 - Single test
测试报告 - testing report
调试测试项 - Debug test item
清除eMMC - Clear eMMC
版本信息 - Version Information
重启手机 - restart cellphone
关闭手机 - Turn off the phone

thank you !
Actually via the factory menu / 版本 信息 I have a MT6582 :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I will contact ebay ... because in addition the tablet crash one time out of 2 on videos (h264 720p or 1080p) with all players tested ...

Related

CPUTableau

People ask where they can download this application so I decided to publish the APK and point all curious to the source.
The CPUTableau application
---------------------------------------
Used to permanently show the CPU clock, temperature (Celsius only), active cores and from today the charging current if applicable (for Note2/Note2/S3/S4 only).
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Tested with many different devices and ROMs:
- Motorola Atrix 4G (2.3.7, 4.0.4)
- Samsung Tab (2.3.6)
- HTC Evo 3D (4.0.4)
- HTC One X (don't remember)
- Nexus 4 (4.4.2)
- Nexus 7 (4.4.0)
- N7100 (4.1.2, 4.3, 4.4.2)
- S3 (4.1.1, 4.1.2)
- some others
(some ROMs require 'root' otherwise CPU cores activity is not shown)
The latest APK:
2.0.198:
View attachment CPUTableau.apk
Updated:
------------
2014-04-01: v2.0.198 (not Fool Day update!)
1. Major redesign
2. Smooth movements (Yes!)
3. Font resize available
4. Transparency level available
5. Various options (not too many?)
6. Fahrenheit/Celsius for your pleasure.
The source: https://github.com/sms2000/CPUTableau (yet not updated to 2.0.xxx)
Instructions:
---------------
1. Install the APK and run it.
2. Select first two check boxes.
3. Press 'OK'
4. Move the overlay any place you wish (see bug below)
The overlay is active all the time even when lock screen or full screen game run.
Known bugs:
-----------------
1. [FIXED, partially] When moving the overlay the redraw may be not as good as it was before.
Some undesired graphics effects happen. Self-fixed after the move finished.
In development.

[Xu] Resolve - Wifi freeze - Continuous Reboot at Startup .Soft Break

I had an Xperia U to repair.
failure: continuous reboot at startup
sw installed: Slikat 4.4.2
bootloader: unlook
I installed ICS original sony ftf
booted everything seemed fine but to turn on the wifi the problem is back ...
I tried various threads to no avail.
in particular, the original thread from the official site sony on changing
File: wpa_supplicant_bgscan.db ..... but going to check the file with root explorer.....
FILE WAS NOT PRESENT IN THE SYSTEM OF THIS PHONE!
Then I tried this procedure on this XU worked:
rooted ics rom installed
install WiFix Manager 1.2
start the program. After choose your own time zone-my, check
advanced setting EU instead of U.S. install. start: installing WiFix.
exit without closing the program and
Enter code from phone dialer: * # 94 349 #
I think now the wifi will work ',
then go to: settings / wireless / advanced / option (keep wifi active during sleep) choose option: only when connected
but on my xperia u closing the display will freeze or reboot the wifi again!!
go in data / misc / wifi - WiFix 1.2 created the file: wpa_supplicant_bgscan.db!!
with root explorer go to the file and give all permissions in reading,
remove all checkmarks in writing (I think this is the problem of freeze)
put the check only: Run: Owners only.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Now this all works Xperia U, made ​​several reboot and power off. It seems solved!
If my work has served you, press "Thanks"

Huawei P8 Lite - Wifi access point problem

Hello,
First of all, my phone is an Huawei P8 Lite ALE-21, bouth in September 2016, it's ROOTED, I've followed this thread to change the ROM : https://forum.xda-developers.com/p8lite/general/mega-thread-root-unbricking-updating-t3400994, to see if was changing anything... (nothing has changed I reassure you)
I'm getting a problem when I want to share my 4G/3G/2G connection to any devices with the Wifi access point :
Using the default parameters in the phone :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The users can connect, get an IP, and communicate with others without any problems, but here comes the troubles ;
When the connected users want to use the Internet, they open a web browser page and, they are automatically redirected to this kind of page :
Yeah I'm French, but this is saying that "YOU HAVE TO PAY FOR SHARING YOUR CONNECTION!", and I'm not hating capitalism but... I really want to find an other way instead of... PAYING.
This is what I tried :
1 - Changing the ROM to an official Huawei's one -> didn't worked
2 - Trying Cyanogen -> did not detected my SIM, so didn't worked
3 - Trying a dozens of application of transmitting the wifi -> didn't worked
This is what I'm thinking about:
1 - First option, the problem should come from the routing of my phone, which is maybe asking an new IP to the operator... Which has detected it. LUCK ! I'm rooted so in the theory I can break anything in my phone (Changing the Routing tables?).
2 - Second option, my operator HAS FULLY DISABLED THIS FEATURE TO EARN MORE AND MORE MONEY. Wrong, my old phone still can do it (Wiko IGGY) with my current SIM card.
What solution should work in any cases:
1 - Explode my phone into a wall
2 - Buy an IPhone 12
3 - Ask xda-developers who as SOO helped me before <3
I hope somebody has a solution... Else I think I will change my phone...
Thanks for helping me!
Waymix, a nervous student.

Stable tutorial for first-timer to maintain an Essential PH-1?

Hello, I've never gone beyond entering developer mode on any of my phones, looking around carefully, then turning that mode off. I own two PH-1 phones, one is in full time service, and I would like to know of a tutorial / step-by-step to do what I need to do to maintain this phone with the images (ROMs?) that are being maintained and updated. I don't need the phone to do anything other-worldly, just keep it updated.
This is the only forum on here I'm allowed to post to, because I've been a listen-only member for a couple years but have never posted. I've just started using Ubunto 20.04 on a new laptop so I can get away from Windows, but I still have a Win7Pro laptop.
Thanks for your recommendations on how to get started -- safely started -- and how to learn what I need to learn.
Also, I just read some of the read-me-first stickys, and please allow this to also be my "Say Hi" email...
"MP"
PS -- I get a captcha, check it, get the green checkmark, but I see *no* image... I'm using firefox w/ NoScript (all scripts enabled for this tab), on an Ubuntu 20.04 laptop.
So no one cares to reply? Did anyone read it besides myself? Whiskeytangofoxtrot
@Messypotamia
If phone's Android OS isn't an A/B-partition-layout-system - what I believe because its Stock ROM is Android 7.1. - then updating a phone's Android requires phone's boot-loader is unlocked. This must get enabled within phone's Developer options - keyword: OEM unlock - what simply sets phone's unlock ability flag to 1 . Additionally it's necessary that ADB ( read: Android Debug Bridge ) gets enabled in phone's Developer options - keyword: USB debugging.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Alter the IR database to send other codes to the TV - Need help

Hey there.
I have since a few days the new ShieldTV remote with IR function and netflix button. Since yesterday I try to change the NvIRTuner.apk (com.nvidia.irtuner) or its database or the IR calls. Unfortunately without success so far.
The database is built very interesting. I'm talking about the O1R_UPDATE_19NOV20.sqlite here.
In the table M_Codes you can find all IR codes. Before the corresponding Java class determines the device which one has selected in the IR-AV-Toogle menu. In my case a LG TV with the id 1970. This Id can be seen in the setup.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Here a Logcat excerpt, if I press my menu button to trigger the HDMI toggle:
07-11 13:37:30.050 4415 4601 D ShieldBluetoothIRInterface: *****REPORT*****0 - Pastebin.com
Pastebin.com is the number one paste tool since 2002. Pastebin is a website where you can store text online for a set period of time.
pastebin.com
Good to see the actual IR_Code that is taken, or its alias:
INPUT SCROLL
What I have tried so far:​-I replaced all IR codes in O1R_UPDATE_19NOV20.sqlite with Channel_UP and then moved this db to /data/data/com.nvidia.irtuner/databases with su-rights.
-> Unfortunately the system app com.nvidia.irtuner seems to read the db inital only once. I can't get it to read my db. I don't understand why. No matter if I reset the app, replaced the O1R_UPDATE_19NOV20.sqlite and give appropriate chown and chmod rights or reset the app before.
-My second attempt was a modified APK. Unfortunately, this can not be installed, because it must be signed by nvidia. I have root, but I don't know what to change in the /system/packages.xml so that the system would accept the app.
->When I try to install it, I only get the message that you have to sign this apk appropriately for the user.
-Then I tried to reproduce the service call from the logcat but unfortunately I don't know what to do.
Does anyone have a tip for me?
Greetings by Idijt

Categories

Resources