Related
Hi
My x10 will not be recognised by usb, ive tried booting it into flash mode and when its connected via usb it will charge but the menu doesnt pop up and nothing appears in the notifications bar. This happend when i tried to unroot my phone through the one click app and re root it. I factory reset the phone and i still have the problem so im stuck on what to do :S
Have you tried restarting your pc?
ah it seems my laptop didnt like both my portable mouse and my phone connected at the same time even though ive had a proper microsoft desktop set connected at the same time before :S Also is there a decrypted 2.1 ROM for the uk?
Did you check your USB cable? maybe it's broken? -.^ test it in another computer, if it recognize is OK, if not send your x10 to assistance
Its recognised via usb and i've managed to change it to global 2.1. However when i rooted it through oneclick and applied the speed fix, it broke root so now it says i've (shell) rooted my phone on oneclick but superuser doesn't work as in it wont pop up at all its quite annoying
Sent from my X10i using XDA App
looks like the alternate root method worked for me so now i have a faster global 2.1 and i have root
Hi there, got xperia with broken? USB port - when plugged in to charger it charges (but doesn't show it's charging), when pluggen in to PC nothing happens (there must be a popup or notification in notification bar like i have on x8?)
the phone is really great, but it has only droid 1.6.
So is there any possibility to run update to at least 2.1 only from SD? not using the USB connection?
I have tried installing zdzihu's tool, but the phone says "cannot install application xRecovery Installer on this phone". Root made by Universal Androot and BusyBox installed in /system/bin/.
Hi,
you can do this in 2 ways.
1:
Use SEUS. Download the New 2.1. Version. Turn your Phone off. Flash your Phone with SEUS
2:
Use Flashtool and flash a custum or genric ROM
http://forum.xda-developers.com/showthread.php?t=920746
I had the same problem. I used the 2nd way
Here a guide how to flash your Phone:
http://forum.xda-developers.com/showthread.php?p=10879507#post10879507
really great, but PC doesn't find xperia when plugged in... so it didn't solve my problem.
use in settings the ota with wifi to update the Phone.
If the micrusb is not working, you should get that fixed 1st.
With phone rooted, busybox installed use xrecovery.apk from the official thread to install it.
Choose a nice firmware to install.
Sent from my Ideos S7 using XDA App
Trimax08 said:
use in settings the ota with wifi to update the Phone.
Click to expand...
Click to collapse
Shows network error (but browser and market normally operate), will try at home with other internet connection.
Phone has been sent to the service and they returned it cancelling guarantee.
all apps downloaded from official threads.
Heh
Cześć katorznik.
Got the same problem yesterday, bought on allegro like a new. I used it for 4 months, everything was perfect. Suddenly USB stopped working. It charges via charger but extremely slowly, via PC nothing happens. The biggest crap I have ever seen in a cell phone that class. :/ Of course I don't have warranty. Did they (service) explained why they cancelled your waranty? Did it happended suddenly or it was already in that condition when you received it? Have you dropped it on the ground etc? Any reasonable explanation?
It is propably impossible to update ypur phone OS without working USB transmission. Phone must be run into service mode first, than you can update basband (from what I know and I think I know much, this can be done only by USB cable) required for newer roms. After that and phone being rooted you can flash newer roms directly from SD. I'm "lucky" 'couse I managed to update baseband to .1.54 and Froyo just before that crap stopped working. Ehhhh.....
It's a physical damage, u r f****d..
Hello people,
i got a small problem. I just bought a sm-g925F and be very happy with it so far. Well the problem is, that i can't connect to the phone via USB to flash another FW because 6.0 isnt aviable for switzerland (AUT) now. For those who think they maybe got a solution: impossible. I already tried everything in every forum. I tried different cables, different PCs, download mode, usb debugging, different drivers, manual set drivers, exit silent mode, wipe device, apply a new usb port on the device (im not that shure if they really did it).
Win 10 gave me a message, that its unable to get informations about the connected hardware. For me there are two solutions: 1. Hardware device of the device core PCB, 2. the Firmware is broken somehow.
ANYWAY i dont want a solution for that. Im just ask if its possible to flash another firmware for example via Wireless Lan oder an SD Card, connected to the S6 via USB adapter.
I am thankful for every reply
Kind regards
Same problem here, USB was working 100% then I got the 6.0.1 beta and now I can't get USB at all.. Are you on the beta?
Sent from my SM-G925F using XDA Free mobile app
Nope, i did a usual update to 5.1.1 when i got my phone.
if the device is still working...dial *#0808# and select MTP+ADB and try if u can flash the new FW you want to flash.
Mtp+adb was already selected
May i change these settings?
Get usb otg cable, and push firmware as adb or put zip rom on usb and browse the connected usb via otg in twrp
Sent from my LG-H815 using Tapatalk
I thoght on this, too... the Problem is that i only have stock recovery
Hey guys i just got my S6 back!
I gave it to a samsung partner after some phones with the samsung service. They wasnt able to fix this problem. So i decided to give it away to repair it. It took 6 days(!!) whats amazingly fast and they installed a new main pcb, usb slot and another thing (dont know the part name) and it works fine now!
Thanks for all your help.
Hello,
I rooted my phone one year ago and ethernet via usb was working as expected on all my computers and OS. Recently I had to restore stock recovery then re-flash TWRP then re-flash supersu.zip. I lost all my datas due to something about encrypted data partition. But after wiped sd card, my phone Is now working again and I restored some datas with Titanium Backup.
Now ethernet via USB doesn't work on any computer, so my question is : how to fix USB ethernet on my phone ?
PS: my phone is a Samsung galaxy A320FL (2017)
Hello,
I am currently in a dead end with my Poco F1, and would like to check with you before throwing it away.
I was using my Poco in version 12.0.3.0 with TWRP installed and root with Magisk. Due to the last days errors of apps that shut down when opened, I decided to reinstall the system using TWRP, but I made a mistake and installed version 12.0.2.0.
I don't know what installing this version did, but now the mobile isn't starting MIUI anymore, it's starting by default TWRP. Furthermore, something has been changed in the TWRP version installed that touchsreen it's not responding, so I can´t use.
The problem is worse since, for a long time the transfer of files to a PC via USB cable isn't working on my Poco, so Windows is not able to detect the mobile in fastboot mode either. I tryied reinstalling drivres in many ways, and still not working. The poco charges perfectly, so I don't think the problem is the USB conector, maybe is a motherboard related issue, so changing the connector I don't belive will solve the problem
Recap:
- I can't start MIUI (the version has been corrupted).
- I can't use TWRP (it has been corrupted and the touch screen does not work).
- I can't install from fastboot (Windows isn`t detecting the Poco with the cable connected).
- I don't think changing USB connector solve de USB data transfer problem.
Any ideas or should I throw away the smartphone?
For me it's a real pitty, because I don't like the new Poco F3 or others phones on the market, most of them don't have 3.5mm jack or microsd card slot, and are bigger, heavier and more expensive than the Poco F1.
Thanks to everyone.
slumpp said:
Hello,
I am currently in a dead end with my Poco F1, and would like to check with you before throwing it away.
I was using my Poco in version 12.0.3.0 with TWRP installed and root with Magisk. Due to the last days errors of apps that shut down when opened, I decided to reinstall the system using TWRP, but I made a mistake and installed version 12.0.2.0.
I don't know what installing this version did, but now the mobile isn't starting MIUI anymore, it's starting by default TWRP. Furthermore, something has been changed in the TWRP version installed that touchsreen it's not responding, so I can´t use.
The problem is worse since, for a long time the transfer of files to a PC via USB cable isn't working on my Poco, so Windows is not able to detect the mobile in fastboot mode either. I tryied reinstalling drivres in many ways, and still not working. The poco charges perfectly, so I don't think the problem is the USB conector, maybe is a motherboard related issue, so changing the connector I don't belive will solve the problem
Recap:
- I can't start MIUI (the version has been corrupted).
- I can't use TWRP (it has been corrupted and the touch screen does not work).
- I can't install from fastboot (Windows isn`t detecting the Poco with the cable connected).
- I don't think changing USB connector solve de USB data transfer problem.
Any ideas or should I throw away the smartphone?
For me it's a real pitty, because I don't like the new Poco F3 or others phones on the market, most of them don't have 3.5mm jack or microsd card slot, and are bigger, heavier and more expensive than the Poco F1.
Thanks to everyone.
Click to expand...
Click to collapse
Hello,
The issue with error of apps was probably due Webview which Google pushed an update and fixed it. For more infos read here.
Now, to the current problem...how did u flashed previous version? Clean installed or Dirty installed?
What Desktop system do you use? AMD or Intel? Your PC can detect the device while you are on TWRP? Do you have twrp.img on ur device so you can reflash it via TWRP?
Check my POCO F1 Ultimate Collection & Guides
Retrial said:
Hello,
The issue with error of apps was probably due Webview which Google pushed an update and fixed it. For more infos read here.
Now, to the current problem...how did u flashed previous version? Clean installed or Dirty installed?
What Desktop system do you use? AMD or Intel? Your PC can detect the device while you are on TWRP? Do you have twrp.img on ur device so you can reflash it via TWRP?
Check my POCO F1 Ultimate Collection & Guides
Click to expand...
Click to collapse
Thanks for your answer.
I noticed that the issue with the apps is due to webview after breaking my phone, next time I'll think things twice before flashing anything.
I did a dirty installation, I thought I was installing same version (12.0.3.0), but I was flashing 12.0.2.0 on top of 12.0.3.0 without cleaning.
I tried both desktop systems: my laptop with an Intel CPU, and a PC with AMD Ryzen 9 3900X. I also tried 5 diferent USB-C cables that are working perfectly with others Android devices. When I look for new devices in the device manager of windows I can't tell any diference on listed devices with or without connecting the Poco. As I said, maybe I have some hardware issue in the phone, because file transfer was not working for many months.
I can't install anything via TWRP because touchscreen don`t respond to mi fingers... I remerber that this happend to me years ago when I installed a wrong TWRP version, but don't know if that is the problem.
slumpp said:
Thanks for your answer.
I noticed that the issue with the apps is due to webview after breaking my phone, next time I'll think things twice before flashing anything.
I did a dirty installation, I thought I was installing same version (12.0.3.0), but I was flashing 12.0.2.0 on top of 12.0.3.0 without cleaning.
I tried both desktop systems: my laptop with an Intel CPU, and a PC with AMD Ryzen 9 3900X. I also tried 5 diferent USB-C cables that are working perfectly with others Android devices. When I look for new devices in the device manager of windows I can't tell any diference on listed devices with or without connecting the Poco. As I said, maybe I have some hardware issue in the phone, because file transfer was not working for many months.
I can't install anything via TWRP because touchscreen don`t respond to mi fingers... I remerber that this happend to me years ago when I installed a wrong TWRP version, but don't know if that is the problem.
Click to expand...
Click to collapse
Are you able to to connect your device while u are on TWRP? Your PC recognize it?
Retrial said:
Are you able to to connect your device while u are on TWRP? Your PC recognize it?
Click to expand...
Click to collapse
I tried to connect the device with TWRP opened, and in fastboot mode, PC don't recognize in any case.
slumpp said:
I tried to connect the device with TWRP opened, and in fastboot mode, PC don't recognize in any case.
Click to expand...
Click to collapse
Well, somehow you need to manage to flash MIUI again via TWRP or Mi Flash Tool.
Perhaps if you redownload latest twrp.img and latest official miui 12.0.3.0 and transfer them to USB OTG or external SD Card and then put ur OTG or external SD Card to your phone and flash it from TWRP. Since you was able to wipe system as u said before you will be able to flash twrp.img into "Recovery" make Clean Install (according my guide) and flash MIUI.
I'll try if connecting something via OTG make the phone responds, but the main problem with TWRP is that appears to be corrupted or something. I cann't use it because touchscreen don't responds to me, and nothing happens either if I try to use it with volume+ and volume- buttons, I see TWRP but I can`t interact with it.
Thanks again for your patience.
Retrial said:
Well, somehow you need to manage to flash MIUI again via TWRP or Mi Flash Tool.
Perhaps if you redownload latest twrp.img and latest official miui 12.0.3.0 and transfer them to USB OTG or external SD Card and then put ur OTG or external SD Card to your phone and flash it from TWRP. Since you was able to wipe system as u said before you will be able to flash twrp.img into "Recovery" make Clean Install (according my guide) and flash MIUI.
Click to expand...
Click to collapse
I tried using OTG cable in TWRP and nothing hapens, TWRP don't respond.
Seems that I'm in a dead end, I ordered an USB PCB spare part to try if is posible to repair the USB data transfer connection replacing it, becuase looks like is the only way I have of flashing a new clean rom.
slumpp said:
I tried using OTG cable in TWRP and nothing hapens, TWRP don't respond.
Seems that I'm in a dead end, I ordered an USB PCB spare part to try if is posible to repair the USB data transfer connection replacing it, becuase looks like is the only way I have of flashing a new clean rom.
Click to expand...
Click to collapse
If you have AMD system try the AMD Fix in my guide. Also try this guide to install drivers.
Finally I could solve the problem.
I bought a new part of the USB port PCB from aliexpress, I ordered one that claims to be original for around 15€, not the 2€ ones.
I replaced it and the data transfer is working again, so I could install the ROM via fastboot from my PC.
I don't beleive that the PCB I replaced is original, but works like it is, phone charges properly and seems that didn't loose signal.
Thanks to everyone.