Related
Hi, I modified some file in the old v4a version to be able to install on new android 7.0 Nougat in enforcing mode until some permissive kernel will be released
I tried the new vers. of v4a (ViPER4Android_2.5.0.5_guitardedhero) but didn't like the new interface and the new sound quality, this old vers. has the super audio quality driver enabled together with Dolby Atmos and offers an improved audio quality over the newest one (in my opinion)
by doing these 3 steps above you'll also have enhanced audio output volume through headphones
STEP0. make sure you already have stericson's busybox installed on your phone before anything else
STEP1. just flash this zip file through TWRP www120.zippyshare.com/v/Jr4TLKB6/file.html
STEP2. replace these 2 files from this archive in /system/etc and give them permission 644 (rw-r-r) www79.zippyshare.com/v/GXEFYNUh/file.html
STEP3. reboot
enjoy v4a and dolby atmos working together on SElinux enforcing mode
Nice!..Can we make the stereo sound of our a5 stereo?
Followed your steps, but v4a didn't install properly.
status - abnormal
audio format - unsupported.
Using A7 2016 Nougat
ashwini215 said:
Followed your steps, but v4a didn't install properly.
status - abnormal
audio format - unsupported.
Using A7 2016 Nougat
Click to expand...
Click to collapse
Working for me. A5 6
V4a 2.5.0.5
Sent from my SM-A510F using Tapatalk
rijuzz said:
Working for me. A5 6
V4a 2.5.0.5
Sent from my SM-A510F using Tapatalk
Click to expand...
Click to collapse
He also worked for me
rijuzz said:
Working for me. A5 6
V4a 2.5.0.5
Sent from my SM-A510F using Tapatalk
Click to expand...
Click to collapse
What's your step?
Whcih busybox are you using?
Supersu or magisk?
I think magisk might be the issue.
Every where i searched, guys are suggesting supersu to be better option for nougat when it comes to installing v4a.
ashwini215 said:
What's your step?
Whcih busybox are you using?
Supersu or magisk?
I think magisk might be the issue.
Every where i searched, guys are suggesting supersu to be better option for nougat when it comes to installing v4a.
Click to expand...
Click to collapse
I didnt install busybox. Using supersu..
I jst flashed v4a 2.5.0.5, after that replaced the xml files as mentioned in step 2 in this post. Thats all
Why isn't any sound mod working on my RN3 Android O (Nitrogen OS) . I remember flashing the same Dolby zip file before. I tried Viper4Android, Dolby Atmos, Arise sound mod but none of them worked. Does anyone have any clue?
coolanushboy said:
Why isn't any sound mod working on my RN3 Android O (Nitrogen OS) . I remember flashing the same Dolby zip file before. I tried Viper4Android, Dolby Atmos, Arise sound mod but none of them worked. Does anyone have any clue?
Click to expand...
Click to collapse
I'm now in latest NoS oreo rom build. In my phone all sound mod working. But I'm only use viper4android. It enough for me for my earphone.
Before use this. You need to flash magisk after that open magisk and install magisk Direct Install ( Recommend ) option which is third option. Then wait it will be self reboot.
Now open magisk manager download module Dolby Atmos or viper4android.
For viper4android script will be install but apps will be not. So, you need to download self from site. Viper4android 2.5.0.5 apk.
Done.
67silverlight said:
I'm now in latest NoS oreo rom build. In my phone all sound mod working. But I'm only use viper4android. It enough for me for my earphone.
Before use this. You need to flash magisk after that open magisk and install magisk Direct Install ( Recommend ) option which is third option. Then wait it will be self reboot.
Now open magisk manager download module Dolby Atmos or viper4android.
For viper4android script will be install but apps will be not. So, you need to download self from site. Viper4android 2.5.0.5 apk.
Done.
Click to expand...
Click to collapse
Thanks! Will check it out.
If u are on AOSP Oreo like I am,
Root it using magisk
Then download viper magisk mod n flash
Then boot up n enable viper
Also I tried ARISE mod n it's working great..but flash viper4android magisk mod first n then arise
Is there a way !without! Magisk? Cause I prefer SuperSU and I don't like/need Magisk.
coolanushboy said:
Why isn't any sound mod working on my RN3 Android O (Nitrogen OS) . I remember flashing the same Dolby zip file before. I tried Viper4Android, Dolby Atmos, Arise sound mod but none of them worked. Does anyone have any clue?
Click to expand...
Click to collapse
mine is also not working
Can it be that Oreo have some kind of more security, that makes it harder to modify and making audio stuff to work, even in permissive mode?
coolanushboy said:
Why isn't any sound mod working on my RN3 Android O (Nitrogen OS) . I remember flashing the same Dolby zip file before. I tried Viper4Android, Dolby Atmos, Arise sound mod but none of them worked. Does anyone have any clue?
Click to expand...
Click to collapse
Use Arise+deuteronomy aroma installer and install viper4arise it will work
Try this one, tell me if it's work.
https://forum.xda-developers.com/showpost.php?p=73964358
FX Manager for Kenzo/Kate :
A Single Manager for your FX needs !
Instructions :
Flash it via recovery to install ViPER4Android, Dolby Atmos and Shox Audio mod by @ScreaMySkrillEX
Remove any magisk module regarding Viper4Android, Dolby Atmos or uninstall old Viper4Android app from data before installing
If Viper4Android doesnt work then try changing SElinux to permissive
Features :
Aroma installer
Option to Install/Uninstall
Option to choose FX based on your wish
Option to include IRS samples (Starter Pack and Free samples by @zhuhang)
Option to delete AudioFX
Option to remove Lineage os default music App (Eleven.apk)
Option to install a lightweight music player
v1.1
Added option to remove deepbuffer during installation (fixes when streaming apps do not process audio effects)
Added option to restore deepbuffer during uninstall
v1.2
Added Snapdragon Music FX
Fixed Installer stuck error on android 8.1
Note : This won't works on Android 8.0
V4A works on Android 8.1, Dolby won't work
If you use shox audio mod please give a thanks or pizza to @ScreaMySkrillEX for his awesome work. You can find original thread in link below
Credits : ViPER520, @zhuhang, @ScreaMySkrillEX, @worstenbrood, Myself
Links :
Shox Audio Mod Original Thread
ViPER4Android Official Thread
ViPER's Audio Blog
Dolby Atmos original Thread
Reserved..
energyspear17 said:
Reserved..
Click to expand...
Click to collapse
Help?
Perfectly working on ResurrectionRemix ROM 5.8.5.-20171017 Nougat with Radon kernel. Finally an easy solution. Thank you!
why every i reboot my device viper4androidfx always ask to install driver?
This work for me.http://cloud.tapatalk.com/s/5a07c7f88d6eb/ViPER4Android-2.5.0.5-20170621.zip
Sent from my Redmi Note 3 using Tapatalk
armo1111 said:
Help?
Click to expand...
Click to collapse
ROM name ??
yaz69 said:
why every i reboot my device viper4androidfx always ask to install driver?
Click to expand...
Click to collapse
Did installation went without any errors ?
energyspear17 said:
ROM name ??
Click to expand...
Click to collapse
DOT os
armo1111 said:
DOT os
Click to expand...
Click to collapse
ill check it :good:
energyspear17 said:
Did installation went without any errors ?
Click to expand...
Click to collapse
solved! i was uninstall other fx app and it work fine :good:
armo1111 said:
Help?
Click to expand...
Click to collapse
Set Selinux to permissive
Soo8 said:
Set Selinux to permissive
Click to expand...
Click to collapse
Thanks worked, but when i am listening music with youtube the processing its still no, help?
New Update
Now V4A installer turned to FX Manager , You can manage V4A, Dolby Atmos or Shox Audio mod using this. Install or Uninstall doesnt conflict with each other.
energyspear17 said:
Now V4A installer turned to FX Manager , You can manage V4A, Dolby Atmos or Shox Audio mod using this. Install or Uninstall doesnt conflict with each other.
Click to expand...
Click to collapse
Can't get v4a to work after installing shox+v4a with FXmanager 1.0. It seems to be a problem that shox modifies some values after the v4a package is installed, because I've seen this just installing separate zips. Installing the shox package before you install v4a should fix this.
Soo8 said:
Can't get v4a to work after installing shox+v4a with FXmanager 1.0. It seems to be a problem that shox modifies some values after the v4a package is installed, because I've seen this just installing separate zips. Installing the shox package before you install v4a should fix this.
Click to expand...
Click to collapse
I installed shox + v4A only. Working perfectly on du
Shox don't affect v4A .. Yes Audiophile mode causes conflicts. If you read audiophile mode's agreement you can see that
Build updated... Now if you select shox with other fx, shox will be installed first before installing others....
armo1111 said:
Thanks worked, but when i am listening music with youtube the processing its still no, help?
Click to expand...
Click to collapse
try to delete deep_buffer
New Update v1.1
Added option to remove deepbuffer during installation (fixes when streaming apps do not process audio effects)
Added option to restore deepbuffer during uninstall
kevinhhgea said:
try to delete deep_buffer
Click to expand...
Click to collapse
I deleted, the when i restarted phone i opened V4A i needed too install driver i did and again i rebooted
Same problem dont work with youtube, any help?
EDIT: Tried spotify, doesnt work either..
Has anyone gotten Viper4Android working on their Galaxy S9+ yet? If so, on which ROM or OS version?
UPDATE: I've found that this version of ARISE works perfectly on my S9+, here are my working arise_customize.prop settings:
I installed this over a ROM using Magisk, so I made sure to include the core and the magiskcompatibility module first.
I then selected ViPER4Arise 2.5.0.5, and didn't install anything else.
Yes, it is working great on LightROM on my S9+
VICosPhi said:
Yes, it is working great on LightROM on my S9+
Click to expand...
Click to collapse
I see LightROM includes Dolby Atmos, did it also then include v4a or did you flash a specific v4a package?
I flashed the V4A zip file via TWRP that I had downloaded from one of the S8 forums when I had S8 and it worked fine
VICosPhi said:
I flashed the V4A zip file via TWRP that I had downloaded from one of the S8 forums when I had S8 and it worked fine
Click to expand...
Click to collapse
Slick, thanks man! I'll give that a shot, I still have the Arise installer that used for my S8 myself so I'll see if that takes
Sent from my Galaxy S8 using XDA Labs
benmeroff said:
Slick, thanks man! I'll give that a shot, I still have the Arise installer that used for my S8 myself so I'll see if that takes
Sent from my Galaxy S8 using XDA Labs
Click to expand...
Click to collapse
Yes that was it, the ARISE package. It works
Sent from my SM-G965U1 using Tapatalk
Hi
I have good sound with viper ?
I use version for magisk and is not good. Volume is poor
Its possible To give me one link of your viper ?
Thanks
VICosPhi said:
Yes that was it, the ARISE package. It works
Click to expand...
Click to collapse
So I've tried using the ARISE Magnum Opus 20170724 installer I had, but on any stock-based ROM it just bootloops the system. Which one works for you? I can see now I was several ARISE versions behind but would prefer not spend time waiting for my rather sizeable Nandroid to restore between testing versions if at all possible lol...
Sent from my Galaxy S8 using XDA Labs
I haven't tried it on stock yet. Maybe try a custom kernel first then try flashing it.
Sent from my SM-G965U1 using Tapatalk
It would be amazing if we could figure out which version of Viper works on the S9+ and maybe some simple steps..
babyboy3265 said:
It would be amazing if we could figure out which version of Viper works on the S9+ and maybe some simple steps..
Click to expand...
Click to collapse
benmeroff said:
Has anyone gotten Viper4Android working on their Galaxy S9+ yet? If so, on which ROM or OS version?
UPDATE: I've found that this version of ARISE works perfectly on my S9+, here are my working arise_customize.prop settings:
I installed this over a ROM using Magisk, so I made sure to include the core and the magiskcompatibility module first.
I then selected ViPER4Arise 2.5.0.5, and didn't install anything else.
Click to expand...
Click to collapse
Sent from my Galaxy S8 using XDA Labs
benmeroff said:
So I've tried using the ARISE Magnum Opus 20170724 installer I had, but on any stock-based ROM it just bootloops the system. Which one works for you? I can see now I was several ARISE versions behind but would prefer not spend time waiting for my rather sizeable Nandroid to restore between testing versions if at all possible lol...
Sent from my Galaxy S8 using XDA Labs
Click to expand...
Click to collapse
i find flashing (smeejaytee - feelthebeats toolbox) from (ARISE+Deuteronomy+2.94+Modular+AROMA) fixes 9/10 issues faced after the magnum opus installation,
ive been using this method for a while now and not really had any problems, just a long winded process installing it all but havnt found A simpler method yet, hope this helps
Which versions of viper did you install? I have a lg g7 with snapdragon 845th in the magisk modules occur again and again sound problems with the volume. as described by a user here in the thread.
Sony92 said:
Which versions of viper did you install? I have a lg g7 with snapdragon 845th in the magisk modules occur again and again sound problems with the volume. as described by a user here in the thread.
Click to expand...
Click to collapse
I just tried flashing this and made sure to install the FeelTheBeats script that YZFR90 recommended in the Aroma installer, and after rebooting and disabling SELinux within Viper4Android settings (after enabling developer mode) it works perfectly for me on Magisk so far.
YZFR90 said:
i find flashing (smeejaytee - feelthebeats toolbox) from (ARISE+Deuteronomy+2.94+Modular+AROMA) fixes 9/10 issues faced after the magnum opus installation
Click to expand...
Click to collapse
OK thanks. because with the viper modules directly from magisk, i only have problems of sound and volume
install the zhuhang version via magisk
that is all
exocetdj said:
install the zhuhang version via magisk
that is all
Click to expand...
Click to collapse
I have only the problems with the volume and the bad quality.
benmeroff said:
I just tried flashing this and made sure to install the FeelTheBeats script that YZFR90 recommended in the Aroma installer, and after rebooting and disabling SELinux within Viper4Android settings (after enabling developer mode) it works perfectly for me on Magisk so far.
Click to expand...
Click to collapse
its not working.
the viper4arise apk crashes
Sony92 said:
its not working.
the viper4arise apk crashes
Click to expand...
Click to collapse
If you haven't already, I'd make sure any other V4A Magisk modules or APKs are all uninstalled, then try reinstalling just that ZIP.
Sent from my Galaxy S9+ using XDA Labs
Installation fails. ends with error 2xx
It may be that viper is not completely compatible with the snapdragon. I'm really restless. have already tried several versions
I searched the Q&A Forum but I didn't found an Answer to my Question.
I tried V4A and another Sound Modul called Divine Modul and flashed it with TWRP but since I'm on permissive status I couldn't get both to work.
Please somebody give me a hint and a link for working Sound module writing on MIUI.
Thanks guys.
I'm using Viper4Android FX + Audio Modifications Library + Dolby digital plus (same as RN5 pro).
Working Miui 10 EU
Files
Dolby (flash zip twrp)
https drive.google.com/file/d/1TiD8yEm-43ZyOHFh6AibPikIYCUfuNFb/view
Rest find magisk
Aerosilver said:
I'm using Viper4Android FX + Audio Modifications Library + Dolby digital plus (same as RN5 pro).
Working Miui 10 EU
Files
Dolby (flash zip twrp)
https drive.google.com/file/d/1TiD8yEm-43ZyOHFh6AibPikIYCUfuNFb/view
Rest find magisk
Click to expand...
Click to collapse
Thanks for fast answer. The link you gave me not working mate. Please post again.
And I don't have to remove any old files in system etc. Just flashing and installing drivers worked for you?
I'm on MIUI 10 Xiaomi.eu 8.10.18 latest Build.
thechosenone43 said:
Thanks for fast answer. The link you gave me not working mate. Please post again.
And I don't have to remove any old files in system etc. Just flashing and installing drivers worked for you?
I'm on MIUI 10 Xiaomi.eu 8.10.18 latest Build.
Click to expand...
Click to collapse
Only add :// after https.
Yes only flash and install same ROM.
Aerosilver said:
Only add :// after https.
Yes only flash and install same ROM.
Click to expand...
Click to collapse
Error.. Couldn't find the page either chrome nor stock browser.
Would you be a gentleman to pay the whole link?
Thank you
thechosenone43 said:
Error.. Couldn't find the page either chrome nor stock browser.
Would you be a gentleman to pay the whole link?
Thank you
Click to expand...
Click to collapse
https://drive.google.com/file/d/1TiD8yEm-43ZyOHFh6AibPikIYCUfuNFb/view
Here
Aerosilver said:
https://drive.google.com/file/d/1TiD8yEm-43ZyOHFh6AibPikIYCUfuNFb/view
Here
Click to expand...
Click to collapse
So flash both Zip's in TWRP right. First V4A and right away Dolby zip? Issue that correct?
thechosenone43 said:
So flash both Zip's in TWRP right. First V4A and right away Dolby zip? Issue that correct?
Click to expand...
Click to collapse
Mate?
thechosenone43 said:
Mate?
Click to expand...
Click to collapse
Yep Dolby with twrp.
Other files search in magiks download.
Bettler speaker sound and headphones
Try
Aerosilver said:
Yep Dolby with twrp.
Other files search in magiks download.
Bettler speaker sound and headphones
Try
Click to expand...
Click to collapse
Dolby works. V4A don't... What I'm doing wrong? I'm on permissive but Drives not installing
thechosenone43 said:
Dolby works. V4A don't... What I'm doing wrong? I'm on permissive but Drives not installing
Click to expand...
Click to collapse
Now after updating V4A I get the Drivers installed but then it says to reboot.. And then see Screenshot...?
thechosenone43 said:
Dolby works. V4A don't... What I'm doing wrong? I'm on permissive but Drives not installing
Click to expand...
Click to collapse
Did you install audio library with magisk?? If not install it and reboot
Aerosilver said:
Did you install audio library with magisk?? If not install it and reboot
Click to expand...
Click to collapse
Yes I did and reboot. Nothing happens from V4A.
Alltough Dolby brings bet sound already alone.
Maybe just drop V4A?
thechosenone43 said:
Yes I did and reboot. Nothing happens from V4A.
Alltough Dolby brings bet sound already alone.
Maybe just drop V4A?
Click to expand...
Click to collapse
It's rare :/
I don't have any problema
Aerosilver said:
It's rare :/
I don't have any problema
Click to expand...
Click to collapse
What the hell lol.. I flashed a V4A apk file manually.
I don't find V4A Module in Magisk.... Whyyyyy???
thechosenone43 said:
What the hell lol.. I flashed a V4A apk file manually.
I don't find V4A Module in Magisk.... Whyyyyy???
Click to expand...
Click to collapse
Don't install manually , search in magisk then install, give permisions (volume + 3 times) then reboot. Search YouTube tutorial maybe can help you.
Aerosilver said:
Don't install manually , search in magisk then install, give permisions (volume + 3 times) then reboot. Search YouTube tutorial maybe can help you.
Click to expand...
Click to collapse
Lol everything good now Mate:good: With search option V4A didn't poped up in magisk.. I don't know why but scrolling down I find it and installed it.
Yeah finally all good.
Thanks allot for guiding me. Have a nice Sunday evening. Cheer's mate:silly:
Aerosilver said:
I'm using Viper4Android FX + Audio Modifications Library + Dolby digital plus (same as RN5 pro).
Working Miui 10 EU
Files
Dolby (flash zip twrp)
https drive.google.com/file/d/1TiD8yEm-43ZyOHFh6AibPikIYCUfuNFb/view
Rest find magisk
Click to expand...
Click to collapse
Thanks for guidance and files dude.
Sent from my POCOPHONE F1 using Tapatalk
thechosenone43 said:
Dolby works. V4A don't... What I'm doing wrong? I'm on permissive but Drives not installing
Click to expand...
Click to collapse
Yup you can not use as same time there is one driver on your device so choose one of them .
Me some times use Dolby and some viper