Hi, I'm trying using LOS 16 ROM. After I try and I succes.
But I decided to use the official ROM.
Before that I already Backup Full (All options checked using TWRP)
When I restore there's no problem, but once reboot to system I get bootloop in Pocophone logo + unlocked words (Booting - Off - Booting - Off).
Okay, so I try restore it again, now it got past the pochophone logo but it stuck in Pocophone logo + loading screen (where 3 little dot and android words on bottom)
Can someone tell me where I'm wrong?
Closed
Okay, so i try to restore it for the 3rd time while waiting reply there.
And it succed, no bootloop.
(from the 1st restore till 3rd restore i didn't do anything different. Only restore from TWRP. So strange, but at least i got my phone back)
Only the pattern password suddenly got wrong when obviously It's no way to be wrong. Since i have 3 phone and all patern is same :/
I just need to wipe data now. :silly:
seems like /data decryption error
never jump between Miui and LOS roms frequently! miui changes alot of things including OEM (vendor) partitions in latest miui10.2.3 rom! which usually gives BOOTLOOPS and TWRP also CANNOT flash any rom!
Related
I rooted my S6 Edge a couple of days ago with no problems. I later added xposed and a couple of modules, no problem (apart from swipeback needing removed after it disabled my camera/gallery). Last night I shut my phone down and put it on the charge for the night. Today after turning it on it was stuck in a boot loop. I have been searching for fixes but there seem to be many different scenarios. I have tried to boot to recovery multiple times to do a wipe partition cache as that seems to the general fix. Problem is I am only able to get into TWRP. So I tried to do a default wipe with TWRP (Says wipes Data, Cache, and Delvik (not including internal storage) ). My phone now only boots to logo before shutting back off. I assume anyway because it isn't boot looping anymore and holding the power button gets the same result, logo then black screen again.
I am able to get into TWRP menu though I should add just about any option I choose, after it executes/completes the phone freezes and needs to be forced off/restarted. It has done this since TWRP was installed.
I am also able to get to ODIN mode.
If I remember correctly it is the G925F Global model. Running 6.0.1 stock, rooted using SpaceX kernal.
This is the process I used to root: edit: Seems I cannot link until I have at least 10 posts. How to Root Galaxy S6/S6 Edge on Android 6.0.1 Marshmallow!
BY MAX LEE google that and top result should be the site I used.
Any help would be greatly appreciated. If you would need anymore info I will gladly do my best to give it. I would like to fix this without losing all my data, apps pics music etc. But if all else fails I am prepared for that.
So, to begin with, yesterday Mi A1 got the Android 9 update. As I always do, I went to uptade it with Magisk (it worked with 8.0 to 8.1 and with every security patch, so I, as a newbie, thought, "why the h3ll not?"). Obviously, it didn't work and I got into a boot loop. So, here are the [lot] of things I have tried to do.
-Downloaded MiFlash and the latest OS version from Xiaomi site (8.1 witch november patch). Tried flashing a lot of times, I always get the boot loop after installing it. Wiped all data with TWRP and still didn't work. Always the same problem. Tried with different versions as well.
-Downloaded latest AOSP ROM for the device, flashed it, wiped cache and data, instaled TWRP (3.2.3-0), but the system never initiates. Doesn't even restart (20 minutes after my last try and it still is in a black screen).
-I've tried the same thing with Lineage 15.1 as well. Checked with MD5 in both roms. Doesn't work at all. Followed every tutorial I could, step by step, don't know what I'm doing wrong.
Can any one please help me? I don't know what to do anymore.
EDIT 1: So, I thought nothing happened, but after installing AOSP, I rebootet the phone holding the power buton, and during boot, I can see the "Powered by Android" from the custom ROM for a few seconds, but then the screed turns black and nothing more happens.
Hi all, I'm experiencing a strange issue but very annoying and I hope that I can find some help with the expert out there. I installed a MIUI 11 based rom and everything was almost perfect. I had to encrypt my phone because it's a company phone and they want encrypted phones. When I was prompted to to so I've followed few indication and the phone restarted and it stayed for ages with the boot logo apparently doing nothing...there was no signal of life but maybe it was just encrypting in the background and I didn't know...other times I encrypted my data I could see a timer but not this time. Well, as a matter of fact I've force restarted the phone and from that moment on all my problems started. After few seconds of bootlogo a message errore popped up saying that I had interrupted the encryption process and that I would have needed a factory reset to restart phone...and so I did...but no way, the same message was always appearing...tried also a full format, factory reset, repairing file system...NO WAY! still the same message. I was panicking...then I've decided to install an AOSP based rom and BOOM, the phone booted up and I had my phone again...Then, proud of this success, I've decided to retry installing MIUI 11; so I made a clean flash (formatting data including internal storage) and, WTF, after few seconds the same [email protected]#@#ing errore message that I had interrupted the encryption process and that I should have made a factory reset, that obviously didn't worked, exactly like the first time.
So, forgive my looong message, but what the hell is going on here??? How is possible that this stupid error message survives to all the full wipe I made including internal storage??? how the hell can I get rid of it? It seems I can't install any of the MIUI rom...tried a couple but same result...
please help...I very much prefer MIUI11 than any other AOSP or similar ROM...
thx
andrea
twrp ,Mount vendor, wipe vendor system data internal.
Try to flash latest vendor only first , then flash the whole rom.
This might help bcuz vendor makes phone encrypt itself.
I have used the search function, but to no avail. Also, sorry for no log files – cant access them (see below).
I used a work around „Error 7 – Assert failed“ while trying to flash Lineage OS (lineage-16.0-20200104-nightly-kiwi-signed.zip) for my honor 5x (this work around: https://forum.xda-developers.com/showthread.php?t=2522762). I was positive that the .zip i used was for my specific phone and that the twrp was the current one. Even after updating to most recent twrp, the error 7 persisted (I did perform the corrext wipes of storage). After „forcing“ the phone to install the .zip anyway (overriding the assert check with the workaround) , my phone is now bootlooped, or worse (stupid me, i guess). During the first restart after flashing, things seemed fine for a few seconds, the lineage logo started to appear for a short while, but disappeared and now only the honor logo appears. It mostly bootloops. I can still access fastboot mode and, with a little luck, also recovery, but touch screen isnt working. Some fastboot commands work, but some do not seem to work, although i am not very experienced with fastboot and cant tell for sure. I have a nandroid backup available.
My questions: How to save the phone? I would be happy to return to stock for now, just to sort things out from there. I couldnt execute most guides to return to stock, since i have no access to twrp (touchscreen no longer reactive). I‘m happy for all ideas.
My firmware KIW-L21C432B160
Hi Everyone,
Since LG was shutting down their developper tools on the 31st of December, I decided it was time for me to finally install Lineage OS. Unfortunately there occured some problems however. I was hoping some of you could help me troubleshooting and possibly fixing it!
The version I wanted to install is the following version, LineageOS 18: https://www.cyanogenmods.org/lg-v30-lineageos-18/
The guide refers to the following guide to install TWRP, this was done succesfully: https://www.cyanogenmods.org/forums/topic/how-to-install-twrp-and-root-lg-v30/ . I did however lose my phone's data, but I've accepted that already.
I then proceeded to following step, the flashing LineageOS step, in the guide: https://www.cyanogenmods.org/forums/topic/flash-install-custom-rom-twrp-recovery/
In this step a problem occured. It stated that the drive I tried to flash to was encrypted. I could flash LineageOS however I could not boot into it. I needed a password to unencrypt the data. I did not have this password (it was not my phones PIN, SIM PIN or Google account). I wanted to try the flashing process again but format the drive first (since I lost my data anyway, I didn't really care). After formatting the system needed a reboot.
The reboot however is stuck. It always goes instantly to the 1st time boot of Lineage OS (while I haven't reflashed yet). It just gets stuck there (I left it on overnight, still no signs of progress). I tried force rebooting using the powerkey+volumedown, that still works, but I can't turn it completely off. Some googling shows that people suggest reflashing the Lineage OS, but that clearly doesn't work because I can't get into TWRP.
I am currently trying to let Lineage OS drain the battery completely and then upon fresh start up try to boot into the TWRP menu and refresh.
The model I have is the LG V30 H930 (no T-Mobile variants or whatsoever).
Some questions that I have:
1. Did I screw up my phone?
2. If 1. is "No not yet", what are some possible solutions?
Kind regards,
Hidde