Hi.
I am rooted on 208 fw with magisk 18100. Is there any guides or someone how to install xposed and use different modules??
Regards Kenneth norway
I installed it few times, always ended with boot loop that required reflashing twrp and wiping data before getting back to system
YTayyar said:
I installed it few times, always ended with boot loop that required reflashing twrp and wrong data before getting back to system
Click to expand...
Click to collapse
Thanks for the input. then i will wait until this gets updated for emui 9....
Related
Hi,
I'm using CM13 on my LG d620, recently I tried installing SuperSu, and then updating binary, but normal way did not worked so I tried to install it with TWRP recovery, so my phone rebooted into recovery, supersu script automatically stared and installation was successfull. I wiped cahce, even dalvik just to be sure, and rebooted system, but it is now stuck in bootloop.
So I'm just curious if anyone would know if I can somehow fix this problem, maybe through recovery, flashing some script, or in terminal in recovery, with adb... pretty much anything just to avoid flashing new rom again and losing all of data and setings....
Thanks in advance
(btw, i'm on cm13 6.0.1, latest update to this day, twrp 3.0.0, supersu latest version on google play store i think, and also have enabled root access)
Enigma. said:
Hi,
I'm using CM13 on my LG d620, recently I tried installing SuperSu, and then updating binary, but normal way did not worked so I tried to install it with TWRP recovery, so my phone rebooted into recovery, supersu script automatically stared and installation was successfull. I wiped cahce, even dalvik just to be sure, and rebooted system, but it is now stuck in bootloop.
So I'm just curious if anyone would know if I can somehow fix this problem, maybe through recovery, flashing some script, or in terminal in recovery, with adb... pretty much anything just to avoid flashing new rom again and losing all of data and setings....
Thanks in advance
(btw, i'm on cm13 6.0.1, latest update to this day, twrp 3.0.0, supersu latest version on google play store i think, and also have enabled root access)
Click to expand...
Click to collapse
I end up with same issue now. I could have read this before flashing SuperSu. Now my device is in boot loop. Please help how to fix this without wiping data?
Rasgola said:
I end up with same issue now. I could have read this before flashing SuperSu. Now my device is in boot loop. Please help how to fix this without wiping data?
Click to expand...
Click to collapse
Just flash rom from the recovery, thats it. Let me know if it worked for you
Hi Guys,
Need some help here. Got a weird problem with my OpX. I have a habit of trying each and every rom on our forum. So, as usually after trying a rom for a day or two I used to revert back to my fav rom. So, I'm familiar with all those flashing stuffs. The problem right now is that I'm not able to boot into any 6.0.1 Rom that I flash. No matter what I do it doesn't boot, just stuck at bootloop. I'm just tired trying out each and every rom out on the developer's section. Wiped completely, even tried downloading the rom multiple times. Tried all type of flashing, like with gapps, without gapps, with gapps, with SU. Tried all possible combination just to end in vain . None of the rom boot into HS, it's just stuck in the bootloop .
However, I've no problem in flashing OOS, H2OS, Color OS, Cm12.1 rom. It flashes without any issues and works fine.
Any help would be appreciated. Thanks in advance
Did you perform a full wipe ( sys/data/cache) when you changed android version (5.1 --> 6.0.1)
Nexx_ said:
Did you perform a full wipe ( sys/data/cache) when you changed android version (5.1 --> 6.0.1)
Click to expand...
Click to collapse
Yes, I even wiped the internal.
Anyone?
prarun2030 said:
Anyone?
Click to expand...
Click to collapse
Maybe you're using F2FS ?
Nexx_ said:
Maybe you're using F2FS ?
Click to expand...
Click to collapse
No bro, not using it. Did a dirty flash over OOS 5.1.1 by wiping data alone and it booted up. Still it doesn't boot if i do a complete wipe..
Hello,
I just flashed MM on my E2353, and then rooted it according to the instructions given here (http://forum.xda-developers.com/m4-aqua/general/root-t3421932) and it was successful. I then attempted to install Xposed for my device, which is the ARM64 version, and flashed it on TWRP, which gave it a bootloop, and I had to re-flash MM from Flashtool and etc. Any help is appreciated,
THANKS!
thes3usa said:
Hello,
I just flashed MM on my E2353, and then rooted it according to the instructions given here (http://forum.xda-developers.com/m4-aqua/general/root-t3421932) and it was successful. I then attempted to install Xposed for my device, which is the ARM64 version, and flashed it on TWRP, which gave it a bootloop, and I had to re-flash MM from Flashtool and etc. Any help is appreciated,
THANKS!
Click to expand...
Click to collapse
if After flash ARm64 Wiping Cashe And Dalvic Cashe You not Bootlooped, Wait 30min for Boot Your device. I Have it in E2333 MM And no Have problem
EHSAN™ said:
if After flash ARm64 Wiping Cashe And Dalvic Cashe You not Bootlooped, Wait 30min for Boot Your device. I Have it in E2333 MM And no Have problem
Click to expand...
Click to collapse
Thanks for the hint, I shall try flashing again via TWRP and clear Cache and Dalvik Cache.
**Update**
The device booted up after a strenuous boot, it heated up to 90C, and such, but nevertheless, it was successful, an Xposed is fully working on the E2353.
thes3usa said:
Thanks for the hint, I shall try flashing again via TWRP and clear Cache and Dalvik Cache.
**Update**
The device booted up after a strenuous boot, it heated up to 90C, and such, but nevertheless, it was successful, an Xposed is fully working on the E2353.
Click to expand...
Click to collapse
So what you did was only waiting 30 min. for the device to boot up? ´Cause I was trying the same thing and I thought it got stuck in the bootanimation
Memo537 said:
So what you did was only waiting 30 min. for the device to boot up? ´Cause I was trying the same thing and I thought it got stuck in the bootanimation
Click to expand...
Click to collapse
Go on Recovery and flash Xposed Framework, And Wipe Cashe and dalvic-cashe. Your Phone Boot on 10min that 30min.
Memo537 said:
So what you did was only waiting 30 min. for the device to boot up? ´Cause I was trying the same thing and I thought it got stuck in the bootanimation
Click to expand...
Click to collapse
Yes, it wasn't stuck in bootloop
Hello, It's Honor 5x.
Everytime I install a custom rom after finishing installing, Rom's boot logo appears then restarts, and keep restarting without doing anything.
I tried cyanogenmod 13 'downloaded their latest official rom' and tried AOSP-CAF But still have the same issue.
All I do is taking a backup, Then wiping all data, system and cache then flashing the zip.
How can I fix this?
Forgot to mention, I was getting error 7 while flashing the zip but fixed it by editing script file.
Any thoughts?
iAhMedZzz said:
Any thoughts?
Click to expand...
Click to collapse
make sure boot img is correct and being pushed correctly, just my thoughts, don't own the device
Must I have stock MM update installed before installing any MM custom rom ?
basically i installed a magisk module that caused bootloop, uninstalled that module in twrp. wiped cache/dalvik just in case. phone got stuck on boot (not bootloop) with just the three 'thinking' dots above the android logo.
waited for about an hour before deciding something was up, so flashed magisk uninstaller.zip to remove the lot, wiped cache/dalvik again. (btw, the bad module was the only module i'd flashed)
now i'm stuck at the boot screen again, has been this way for coming up an hour, should i wait longer, is it optimizing my installed apps? or should i just resign to having to flash a rom again and reinstall all apps/settings etc?
foolishly i forgot to backup data before flashing the module. didn't expect this kind of headache!!
any advice please
its a bootloop. reinstall firmware.
Yep, firmware flash was the only way
Mohd Haikal said:
its a bootloop. reinstall firmware.
Click to expand...
Click to collapse
Reinstall firmware means i just have to flash MIUI 9.2.25 vendor firmware for pie by Akhil Narang, or I have to flash entire stock Miui by downloading the zip?
Just the vendor firmware. Depending on what ROM you have, you can install a newer version than 9.2.25. I use 9.3.25 with PE.
clonechill said:
Reinstall firmware means i just have to flash MIUI 9.2.25 vendor firmware for pie by Akhil Narang, or I have to flash entire stock Miui by downloading the zip?
Click to expand...
Click to collapse
You can try flashing only the boot.img file from the currently installed ROM's zip file