Can't seem to grab the changelog to paste here but it looks like a good update!
Srem said:
Can't seem to grab the changelog to paste here but it looks like a good update!
Click to expand...
Click to collapse
Yep
Here too
Sent from my TA-1004 using Tapatalk
I could get only so much in my long shot.
I have a screen shot. But unable to share here.
Here's the changelog:
Amazfit OS update log
Version: 2.8.4.0
- Added German Translation
- Added news notification support for Korean and Thai
- Added "Sports Reminder"
a. sports start reminder: automatically recognize the running and walking mode after opening, will remind start of the corresponding sports mode after 5 minutes of exercise, and save the official data before;
b. End of motion reminder: automatically recognizes the end state of running and walking after opening, reminds the end and automatically suspends the movement after 10 minutes of exercise
- Added music playback control function during sports (the watch will display the control screen on the last screen after the music is played)
- Added "3 data big characters" mode for sports interface
- Update GPS firmware for more stable location service
- Update indoor running algorithm
- Update heart rate algorithm to improve the stability of heart rate measurement
- Optimize connection stability for iOS devices
- Optimize emoji emoticons (temporarily does not support non-standard emoji emoticons)
- Optimized motion record, slope distribution data display
- Optimized GPS signal may be missing when the GPS signal is not good
- Optimize possible power consumption in some watches
- Optimize initial altitude data inaccuracy
- Fixed problem with continuation of motion pause and trajectory drawing error
- Repairing abnormal mileage in some areas
- Fixed speed and speed anomaly due to GPS loss
- Fixed partial altitude data showing inconsistencies in watches and apps
- Repair outdoor cycling/skiing/indoor running, automatic suspension, continuous vibration bug
- Fixed some bugs in speed data and improved real-time speed stability
- Bug fixes
My Timeline Widget won't work after the update
Always on display not working anymore.
To bad. How to downgrade?
Error again
2.8.4 update make an error again and again, even factory reset, anyone else to help this problem?
ds1rbi said:
2.8.4 update make an error again and again, even factory reset, anyone else to help this problem?
Click to expand...
Click to collapse
I got an answer I think
https://forum.xda-developers.com/smartwatch/amazfit/fw-tool-stock-firmware-installers-2017-t3725494
Melhiat said:
Always on display not working anymore.
To bad. How to downgrade?
Click to expand...
Click to collapse
Huh? Pace always have AlwaysOnDisplay, what are you taking about? If you get a black screen while screen is locked and you are using a custom APK watchface then you need to uninstall the current version, restart the device and seek for a new version that also works with Stratos firmware 2.3.7.0+, older APKs don't work anymore....
Calories are now much more accurate on my cycle
lfom said:
Huh? Pace always have AlwaysOnDisplay, what are you taking about? If you get a black screen while screen is locked and you are using a custom APK watchface then you need to uninstall the current version, restart the device and seek for a new version that also works with Stratos firmware 2.2.7.0+, older APKs don't work anymore....
Click to expand...
Click to collapse
Noticed that afterwards. Thanks for info anyway.
kedlub said:
Here's the changelog:
Amazfit OS update log
Version: 2.8.4.0
- Added "Sports Reminder"
a. sports start reminder: automatically recognize the running and walking mode after opening, will remind start of the corresponding sports mode after 5 minutes of exercise, and save the official data before;
b. End of motion reminder: automatically recognizes the end state of running and walking after opening, reminds the end and automatically suspends the movement after 10 minutes of exercise
Click to expand...
Click to collapse
I think some of them exists in older roms already. ?
How do you disable the sport autostart ? Every time, as I am returning from walking the dog, I get a message saying I have started a walk - about 30 mins after it started
From some other thread:
lfom said:
Latest firmwares for all watches (Pace/Stratos/Verge) introduced "Activity reminders" (also called Sports reminders on Verge) that are supposed to auto-start and auto-stop recording activities, but they have a bug (besides the fact that I don't think they actually work as of now): even if both are disabled by default you must enable and then disable both options in watch Settings -> General or your activity most probably will miss the first initial and final minutes of GPS data. Simply enable both, quit settings then go back and disable them again and it should be fine.
Click to expand...
Click to collapse
Finally, Thai language support, but it renders text incorrectly in standby screen as it doesn't render upper and lower character, for example, words like "หู้" will be rendered as "ห" in standby screen, but it will be rendered correctly in active screen. Also, its Thai font is too wide.
Do you think that this update is useful?
gps not working
gps is not working after the update for me, did a factory reset but still not working
Apk watchfaces not working correctly with this new rom.
When the watch goes to sleep after x second timeout the screen either goes black or out showes previous wfz watch face or showes correct apk watchface but very grainy.
Srem said:
Calories are now much more accurate on my cycle
Click to expand...
Click to collapse
Same with my elliptic. Went from around 100-130 for an intensive 30-min session to around 420-440, about the same as what the machine actually gives.
yaronkle said:
Apk watchfaces not working correctly with this new rom.
When the watch goes to sleep after x second timeout the screen either goes black or out showes previous wfz watch face or showes correct apk watchface but very grainy.
Click to expand...
Click to collapse
Old APK watchfaces should be updated to work with newer firmware (for both Pace and Stratos), check if the developer released a new version.
Related
First of all, thank you for your interest and feedback! Mostly due to your request I want to present you a new version.
Version 1.25 changelog:
1. Added Connections on/off
2. Added alarm - poor one
Version 1.20 changelog:
1. Added new profiles: WiFi on/off, Bluetooth (BT) on/off, Phone on/off. Added also Soft Reset.
2. Some minor changes.
Version 1.10 changelog:
1. Added half-hours (I think quarters are too much).
2. Hour format (24 or 12) is automatically changed depending on your regional settings.
3. I don't have VGA device, but I think now the screen is squeezed a bit so it can fit to VGA square screen. Please, try and tell me what happens.
4. Added sound profiles - low, medium, high and very high.
5. Number of settings increased from 4 to 15.
Please, download TProfiler120.CAB for latest version.
Automatically switches device sound mode(available profiles - sounds on, sounds off, vibrate, volume low, medium, high, too high), turns on/off wifi, bluetooth, phone mode and soft resets at selected hour and weekday and thus saves your battery power. Simple application, doesn't occupy memory. Tested only on HTC HD2 but should work on other devices too (TP2, Touch HD/Blackstone - tested thanks to replies to this thread).
It works fine on TP2
Great application.
It would be great if it had also a 24-hour mode .
It would also be great if we could set the device to change to a certain volume on the Ring and System. I like to turn my phone down to 2 notches on both of those and crank it back after 5pm.
digiblur said:
It would also be great if we could set the device to change to a certain volume on the Ring and System. I like to turn my phone down to 2 notches on both of those and crank it back after 5pm.
Click to expand...
Click to collapse
+1 on this request.
Would be also great if one could change profile on headset plug-in/plug-out.
When I softreset the phone it gives me a non signed error.
VGA please
scabbard1 said:
VGA please
Click to expand...
Click to collapse
+1
looks very promising as of this is really important to have because i tend to forget to switch my phone to silent when im at school
ill be watching this thread
Great application !
Feature request: time in quarter/half hours too.
You might want to add some additional 'rules'. If you have a different time schedule for every day in the week, 4 just aren't enough...
Awesome
Been waiting for a free app like this. The Connective Tools one is nice, but I love the continuing user driven development of XDA. The suggestions on here are great and I echo the setting the volume to a custom level and the quarter/half hours things.
zharptitza said:
Been waiting for a free app like this. The Connective Tools one is nice, but I love the continuing user driven development of XDA. The suggestions on here are great and I echo the setting the volume to a custom level and the quarter/half hours things.
Click to expand...
Click to collapse
+1 though 5 min time slots would be better. Are going to try and integrate the App so it will switch on calendar appointments?
just installed 1.10 on my HD, but when I start the app it alerts "Doesn't exist", and after tapping 'ok' the app doesn't respond anymore, actually the complete screen doesn't respond. Using the hardwarebuttons I can go back to my homescreen and then using the system taskmanager I can shut the app down after that everythings fine..
anybody got an idea? because it looks like a useful app to me
Dear Xsite3,
I think you had to wait for a while - when started first time the application takes more time (1-2 minutes).
Just installed v1.1 on my HD2 and i get the message attached. Any ideas?
When I try to start up TProfiler I get a message box that simply says "Doesn't Exist". After that I can click on the TProfiler icon all day long but nothing happens. Wonder what doesn't exist?
V 1.10 crashes for me
I was using version 1.00 with no problems on my HTC Fuze running WM 6.5. But version 1.10 crashes on startup with this error:
TProfiler.exe
InvalidCastException
at
Microsoft.VisualBasic.CompilerServices.Conversions.ToInteger()
at
DeviceApplication1.Form1.Form1_Load()
at
System.Windows.Forms.Form.OnLoad()
at
System.Windows.Forms.Form._SetVisibleNotify()
at
System.Windows.Forms.Control.set_Visible()
at
System.Windows.Forms.Application.Run()
at DeviceApplication1.Module1.Main()
The app appears to draw at least a portion of it's window, and then crashes, though it goes by too quickly to see just how much of it is drawn
I really like the app. I especially like the addition of half hours in this version, if I can get it to work.
Hypermommy said:
When I try to start up TProfiler I get a message box that simply says "Doesn't Exist". After that I can click on the TProfiler icon all day long but nothing happens. Wonder what doesn't exist?
Click to expand...
Click to collapse
Hmm same here
Phone: TOuch HD
Rom: Xannytech 1.9B (+maxManila)
Cheers
Problems
Fellows, sorry for keeping you waiting - Please, try now - it should work.
Hi,
I'm just letting everyone know that I have just pushed an update to my automation app MacroDroid http://forum.xda-developers.com/showthread.php?t=1694335 to add Android Wear support.
You can read about the functionality on my blog post here: http://macro-droid.blogspot.co.uk/2014/08/introducing-macrodroid-wear.html
This is a first release, so I strongly welcome all feedback and comments!
Cheers,
Jamie
Very impressive app ?, seriously quality app.
I need more time to test out all the different stuff in your app but so far everything works great whit my lg watch .
This is using 60mb of memory for the macrodroid process alone. Seems very high.
This is on a Moto G. Compared to Tasker which is running at the same time and only uses 12mb.
I have deleted all macrodroid profiles so it shouldn't have had anything running, but the memory use was still high.
Cossack101 said:
This is using 60mb of memory for the macrodroid process alone. Seems very high.
This is on a Moto G. Compared to Tasker which is running at the same time and only uses 12mb.
I have deleted all macrodroid profiles so it shouldn't have had anything running, but the memory use was still high.
Click to expand...
Click to collapse
You're right that does sound very high, I've got a bunch of macros configured and I'm at 19MB. Most likely you've hit a memory leak in the UI and the UI pages are still hanging around in memory. It can be hard to catch all cases as there are many many UI paths, but I'll certainly do some more memory profiling to see if I can spot anything naughty hanging around. If you kill the MacroDroid process and restart does the memory return to something sane for you?
Cheers,
Jamie
I killed the app and wiped the macros. Started again with only 1 simple low battery warning macro. It stayed at 15mb all day.
I just created a new location macro and it jumped to 38mb and stayed there.
I switched macrodroid off and restarted and it is now back to 17mb.
Cossack101 said:
I killed the app and wiped the macros. Started again with only 1 simple low battery warning macro. It stayed at 15mb all day.
I just created a new location macro and it jumped to 38mb and stayed there.
I switched macrodroid off and restarted and it is now back to 17mb.
Click to expand...
Click to collapse
Great thanks for the info. I've just had to move to Google Maps V2 and changed a load of UI, so I'm guessing I've got a little bug in there where I'm not releasing something. Hopefully I can get this squashed for the next update.
Cheers,
Jamie
I am trying to automate the screen intensity.
The worst thing about my Gear Live is battery live, if I am inside love to find a way to always have the screen minimum and the best I could do is have a manual macro to change the screen intensity.
I wonder if I can design a macro that every time the watch gets a notification the screen goes to 5, when it dims it goes back to 1.
Why not set the brightness to low when connected to WiFi and high when disconnected.
It should mean you always have a dim watch when indoors
AstroDigital said:
I am trying to automate the screen intensity.
The worst thing about my Gear Live is battery live, if I am inside love to find a way to always have the screen minimum and the best I could do is have a manual macro to change the screen intensity.
I wonder if I can design a macro that every time the watch gets a notification the screen goes to 5, when it dims it goes back to 1.
Click to expand...
Click to collapse
You could do something like on every incoming notification (using the incoming notification trigger), you set the brightness high and have a sleep before next (e.g 30 seconds) and set the brightness low again. Not perfect but might be of some use.
What I really wanted to do was find a way so that I could configure the Always on screen setting via the action, but after digging down into the code I'm pretty certain this would only be possible on a rooted Android Wear device and I don't really want to go adding 'root only' features for Wear just yet. Hopefully Google will open up this API at some point because as you point out battery life is critical on these devices.
Cossack101 said:
Why not set the brightness to low when connected to WiFi and high when disconnected.
It should mean you always have a dim watch when indoors
Click to expand...
Click to collapse
I do not use WiFi on my cell phone, just LTE data at least 95% of the time.
---------- Post added at 05:02 PM ---------- Previous post was at 04:39 PM ----------
UndeadCretin said:
You could do something like on every incoming notification (using the incoming notification trigger), you set the brightness high and have a sleep before next (e.g 30 seconds) and set the brightness low again. Not perfect but might be of some use.
What I really wanted to do was find a way so that I could configure the Always on screen setting via the action, but after digging down into the code I'm pretty certain this would only be possible on a rooted Android Wear device and I don't really want to go adding 'root only' features for Wear just yet. Hopefully Google will open up this API at some point because as you point out battery life is critical on these devices.
Click to expand...
Click to collapse
If I set the app to listen for notifications it looks like it will disable much more than I would like to be disabled.
Manage Accessibliity, MacroDroid
-air gesture, air view interaction control, assistant menu, multi window, direct pen input, palm motion, one-handed operation will all be turned off....
I always lost "Jess" my customer voice synthesizer
Some of these I will miss on my Note 3 but I am trying it,
Toggle on Notification
Android Wear set the brightness to 6
Sleep before next action 20 seconds
Android Wear set the brightness to 1
If it works right notifications will crank the display for 20 seconds and then dim the display (may cut it back to 10 or 5 seconds)
You know I like your app, tried the other macro app .... (can not remember its name)
Found it too complicated..... Thanks for the tip.
AstroDigital said:
I do not use WiFi on my cell phone, just LTE data at least 95% of the time.
---------- Post added at 05:02 PM ---------- Previous post was at 04:39 PM ----------
If I set the app to listen for notifications it looks like it will disable much more than I would like to be disabled.
Manage Accessibliity, MacroDroid
-air gesture, air view interaction control, assistant menu, multi window, direct pen input, palm motion, one-handed operation will all be turned off....
I always lost "Jess" my customer voice synthesizer
Some of these I will miss on my Note 3 but I am trying it,
Toggle on Notification
Android Wear set the brightness to 6
Sleep before next action 20 seconds
Android Wear set the brightness to 1
If it works right notifications will crank the display for 20 seconds and then dim the display (may cut it back to 10 or 5 seconds)
You know I like your app, tried the other macro app .... (can not remember its name)
Found it too complicated..... Thanks for the tip.
Click to expand...
Click to collapse
I've no idea why these should be turned off by enabling MacroDroids accessibility options, but I don't have any Samsung devices so I'm afraid I can't really look into it at the moment.
UndeadCretin said:
I've no idea why these should be turned off by enabling MacroDroids accessibility options, but I don't have any Samsung devices so I'm afraid I can't really look into it at the moment.
Click to expand...
Click to collapse
If the macro works may not care much about the disabled stuff.
May want to put constraint in, 5am do not need the watch display cranked.
- Added "crossing the interstellar" watchface
- Added real-time track in the real-time track page lock screen under outdoor sports
- Updated tennis algorithm
- Optimized altitude output in motion
- Optimized distance issue from the last lap of the swimming pool
- Optimized miscalculation in swimming mode
- Optimized inaccurate swimming distance in open waters
- Optimized inaccurate output of running strides in some cases
- Optimize calorie consumption calculations in some cases during exercise
- Optimized walking heart rate
- Optimize low heart rate in certain situations
- Optimize indoor running calibration process and put in motion pause interface
- Optimize the stability of vibration functionality
- Optimize heart rate
- Optimized data synchronization for android phones
- Fix sporadic power consumption issues
- Fixed some issues with call reminders
- Bug fixes
Has someone updated ? impessions?
Yep, i have but not been in activities to proove improovements... ???
I have installed as well. No workouts yet. I have seen an extra menu item in run extra settings that is called virtual rabbit. I guess it is a ghost runner to keep you in pace. Interstellar watchface looks nice.
I can not understand what "real-time track in the real-time track page lock screen under outdoor sports" refers to.
giol said:
I have installed as well. No workouts yet. I have seen an extra menu item in run extra settings that is called virtual rabbit. I guess it is a ghost runner to keep you in pace. Interstellar watchface looks nice.
I can not understand what "real-time track in the real-time track page lock screen under outdoor sports" refers to.
Click to expand...
Click to collapse
I also noticed that and was wondering what the difference with pace alerts were. Both should notify you when you go outside a predefined pace, I guess.
Not done much since installing but the continuous heart rate appears to be more responsive when I move and thus my HR increases.
Previously I could go for a brisk walk and it wouldn't notice any change on the watch.
Fingers crossed its fixed.
On new watchface, there is a tiny heart on top. Does anybody get his/her heartrate shown on that watchface?
I do not think it shows heart rate. I have the eternal moment watchface which is showing HR data. Anyway I did not seem much changes, just the new watchface and the virtual rabbit. The update is mostly bug fixing which is a good thing. Still I am missing a cardio and yoga activity type.
giol said:
I have installed as well. No workouts yet. I have seen an extra menu item in run extra settings that is called virtual rabbit. I guess it is a ghost runner to keep you in pace. Interstellar watchface looks nice.
I can not understand what "real-time track in the real-time track page lock screen under outdoor sports" refers to.
Click to expand...
Click to collapse
I've just installed the update. Watchface looks nice.
But I don't know how to use Virtual rabbit and Real-time track.
Waiting for other's feedbacks.
Regards.
wsabg said:
On new watchface, there is a tiny heart on top. Does anybody get his/her heartrate shown on that watchface?
Click to expand...
Click to collapse
Hi
I also saw a heart on top but there's no HR number. Is it simply a symbol?
To me prototype source will always be the best watch face but the new face is a nice addition.
Haven't noticed much new stuff, the UI seems more fluid but that just might be a placebo.
I hope the next update they make an effort to fix the pretty terrible step counting.
Tested it with a bit of cycling back from work. One thing I noticed is it no longer vibrates when auto-pause switches on and off.
As others said, HR seemed responsive and accurate (but that couldn't mean anything, since it was pretty much accurate when cycling previously as well). Will test it tomorrow morning with some trail running and, fingers crossed, I hope to see some good changes
Edit: Also, I noticed the bug with synchronizing rides to strava showing up as runs has been fixed.
Well, i don't know if it's a bug with the new firmware - but it does not sync the sleep datas anymore. I have the datas from last night on my phone but not synced with the Amazfi app....
I have also updated yesterday, continuous heartrate seems much more reliable now. Tested several times, finger on wrist and counting, real heartrate 58 watch stated 59, real 76 watch 76, 87/88 and so on, before update the watch sometimes measured a heartrate of 40 when it really was at 80 or 90 and it was always approx. 10-15 beats to low. Now it seems to be useable.
[email protected]: Sleep was tracked correctly last nigth but I had some cases (2 or 3 in half a year) when sleep was not recognized for no reason so it could be an issue not depending on this update. Sometimes sleep data were correct on watch but simply didn't show up in app, after several syncs sleep data suddenly appeared.
Edit: Steps are also more accurate now, watch starts counting now after 10 steps not 30 like before so short walks to the fridge are recognized now.
giol said:
I have installed as well. No workouts yet. I have seen an extra menu item in run extra settings that is called virtual rabbit. I guess it is a ghost runner to keep you in pace. Interstellar watchface looks nice.
I can not understand what "real-time track in the real-time track page lock screen under outdoor sports" refers to.
Click to expand...
Click to collapse
You now can see your location on the lock screen if you have chosen to follow an imported GPX track. Really cool now.
Tap to wake
Tap to wake .............still problem, not solved
You type twice and not working??
---------- Post added at 05:25 PM ---------- Previous post was at 05:24 PM ----------
They should implement manual altitude settings should be a real plus
Dennis78 said:
Edit: Steps are also more accurate now, watch starts counting now after 10 steps not 30 like before so short walks to the fridge are recognized now.
Click to expand...
Click to collapse
Ah I will try. My stratos waiting in a drawer because not usable as daily steps counts.
dersie said:
Ah I will try. My stratos waiting in a drawer because not usable as daily steps counts.
Click to expand...
Click to collapse
Seem still bad and not usable. Little test :
- Garmin F3 : 543 steps
- Stratos : 275 steps
so Stratos count almost half steps. I think it have still 1/3 real steps because Garmin count only after 10 steps.
So daily steps count with stratos still totally wrong
"Time to stand up, you've been sitting for a while" alerts seem broken now. Granted, they still only occurred while sitting, but I think I went to the fridge to get a beer 3-4 minutes ago, and now it says I've been sitting for a long time Maybe now it does not count small movements like short strolls, only longer ones.
Hey everyone,
This will be a Thread for collecting all the kinds of bugs and other issues you might have encountered.
I talked to the german FB group and talked about them sending them a collection of bugs etc from the community. They gave me an email address (from the communication team) where i can send it to once everything is done.
They will then proceed to send the information to the people developing for axon 7 (A2017G in this case). Of course it's not guaranteed that they will definitely fix all the issues. But it's worth a shot imo.
So at first it's important that bugs have the most importance in this thread since those have to be fixed in order to get an enjoyable oreo experience.
BUT you can also post any features you want to have back (examples are daydream, screen color calibration)
To get things finally started, here are the issues that i gathered so far from this thread:
-SD card mounting issues (SD card doesn't stay mounted after reboot)
-Increased battery drain (mixed opinion, some say it's worse, some say it's the same as nougat)
-Preinstalled apps which are uninstallable (like Accuweather, WPS Office) reinstall themselves after reboot
-Events set in Google calendar don't show a notification
-Bluetooth audio developer options (LDAC, 32bit, 96khz, etc) do not stick
-screencast not working on some miracast devices
-Panorama has lower vertical resolution (approximately 1900px while Nougat had 2800px)
-Charging sound file is missing (now it uses error sound file when connecting/disconnecting USB which sounds really annoying)
Missing Features that you wish to come back or added:
-Screen Color Calibration
-Daydream (which might come back since how they worded it to be temporarily disabled)
-Camera2 api not yet fully implemented
-Vulkan API (was present in Nougat, now removed in Oreo for unknown reason)
-Screen lock app (shortcut in quick settings to lock the device)
-Option to remove Carrier name in status bar
-Dark Mode option (preferably true black background for the while UI like quicksettings menu, settings menu etc for max SOT.)
-More sorting options for stock music player (by title number etc instead of by alphabetical order)
-ZTE Toolbox app
I'm sure there is more. But this is what i have found so far as of now. If there is any more issues you encountered, please post them so i can add them to the list.
Also if i missed any additional info for the issues above, please feel free to tell me.
- Dark mode option
- further dimming option (lowest brightness still too bright)
- screen off toggle/widget
1. Screen cast still won't work well, I never get it connected to miracast since nougat and they didnt fix it on oreo, all my other devices work so good with the same miracast.
2. Battery drain faster than nougat or I think this even worse than oreo beta build B01.
Feature:
- The alphabetical order on music folder for stock music is still annoying. No one hopes listening music from A to Z based on title.
One more:
I don't know if it's just me, but I have a bug where the download manager won't download anything for a long time despite having stable internet connection. This affects Play Store app downloads and downloads other than Chrome (since Chrome has its own download manager it seems). Basically, if I want to quickly download an app or update them, the initialisation starts but it keeps waiting for stuff to download. It won't abort with an error, it just sticks to the spinning circle. In the notification bar you won't see the download arrow animation, which should be there actually. But if I lay down my phone for a while and then pick it up, it may start downloading normally. It's very annoying, you can imagine m
ChiDi9901 said:
One more:
I don't know if it's just me, but I have a bug where the download manager won't download anything for a long time despite having stable internet connection. This affects Play Store app downloads and downloads other than Chrome (since Chrome has its own download manager it seems). Basically, if I want to quickly download an app or update them, the initialisation starts but it keeps waiting for stuff to download. It won't abort with an error, it just sticks to the spinning circle. In the notification bar you won't see the download arrow animation, which should be there actually. But if I lay down my phone for a while and then pick it up, it may start downloading normally. It's very annoying, you can imagine m
Click to expand...
Click to collapse
I know what you mean. But it's not a bug from oreo. I had this too on nougat. Sometimes it still happens. But not as often as it used to be. Dunno what fixes it sadly, but thats probably an issue of play services messing up something since the axon 7 isn't alone. Many other devices have this problem as well sometimes. It comes and goes randomly.
And as you said, chrome and other apps with their own download manager don't seem to have these issues. Again, it's probably play services doing something wrong. Not sure tho, just a guess as play services had many problems in their history
macmobile said:
- Dark mode option
- further dimming option (lowest brightness still too bright)
- screen off toggle/widget
Click to expand...
Click to collapse
What do you mean with dark mode? Like amoled substratum themes? Or like night light?
Poor wifi and 4g reception. This has been my main problem with this rom.
GodOfPsychos said:
What do you mean with dark mode? Like amoled substratum themes? Or like night light?
Click to expand...
Click to collapse
Quick settings, status bar and system settings are all unbearably white. Due to Google's safety measures you can't even use a third party filter anymore.
On Nougat you could change the quick settings to gray at least and use a third party filter for all the rest. On Oreo, no chance at all. What a bad user experience!
So why even bother with a system update, if it doesn't let you adjust the display brightness to your liking anymore?! And I haven't even mentioned the usefulness of an all white UI on an AMOLED screen (Battery!?).
Panorama has lower vertical resolution.
Nougat approx 2800px
Oreo approx 1900px
Signal issues
Hd calls work with incoming but call does not connect for outgoing
Band switching issue band keeps switching thats the main reason for battery drain on 4g
My network is Jio 4g in India
It works in band 3 5 and 40
3 and 5 bands work together but they wont work well with 40 that is they keep switching from one to other with internet connecting and disconnecting
So i switched off band 40 using network signal guru app with magisk root permissions and everything works fine except slow internet speed and persistent hd call issue
Can anyone make solution for band issue
If there is a possiblity to reduce the heat generated during simple tasks.
I had most of those issues: significantly worse battery life, camera freeze when using RAW capture, when I reseted the phone, everything is back to normal, maybe battery is like 5-10% worse than nougat but not sure. Can't say anything about the missing features. I want them too, but most of wanted a Stock + UI and now we complain ? vanilla Android lacks many features like it or not. Hope they release some future firmware update to fix any issues and update the security bulletin.
alexvv said:
I had most of those issues: significantly worse battery life, camera freeze when using RAW capture, when I reseted the phone, everything is back to normal, maybe battery is like 5-10% worse than nougat but not sure. Can't say anything about the missing features. I want them too, but most of wanted a Stock + UI and now we complain ? vanilla Android lacks many features like it or not. Hope they release some future firmware update to fix any issues and update the security bulletin.
Click to expand...
Click to collapse
You had most of these because i used the same thread your post was in as well about the freezing raw capture with stock cam.
But you are the first and only one who had this happen with the camera. So far nobody else reported having the same issue.
alexvv said:
I had most of those issues: significantly worse battery life, camera freeze when using RAW capture, when I reseted the phone, everything is back to normal, maybe battery is like 5-10% worse than nougat but not sure. Can't say anything about the missing features. I want them too, but most of wanted a Stock + UI and now we complain [emoji39] vanilla Android lacks many features like it or not. Hope they release some future firmware update to fix any issues and update the security bulletin.
Click to expand...
Click to collapse
I never ever wanted Stock Android. Stock is the least customizable iteration of Android. So who could want this kind of user experience? People who think Google knows what's best for you? Ridiculous!
Any one tried downgrading to Nougat?
Tried official update.zip. Downgrade FAILS!
This package is for "ailsa_ii" devices; this is a ""
(My device only received official updates, never a custom ROM or root)
Yerry said:
Any one tried downgrading to Nougat?
Tried official update.zip. Downgrade FAILS!
This package is for "ailsa_ii" devices; this is a ""
(My device only received official updates, never a custom ROM or root)
Click to expand...
Click to collapse
You can't downgrade with the official update.zip
Also this is the wrong thread to post this. This thread is for bugs found in oreo.
I appear to be having poor quality sound when playing audio though the main speakers. There's a hissing sound.
GodOfPsychos said:
You can't downgrade with the official update.zip
Also this is the wrong thread to post this. This thread is for bugs found in oreo.
Click to expand...
Click to collapse
I disagree on both of your statements. here is why:
1. It is possible to downgrade, but not with all official update.zip that exist (I succeeded in the meantime!)
2. It is a bug in the Oreo rom that the device type is not set, preventing majority of old update.zip to run since they check the device type
I am missing the stock Nougat 'lock screen' option in the Quick options menu. I am using an app to soft lock the screen at the moment which works but am not sure at all why they removed it in first place.
I am also missing the Messaging and Phone customization options available in Nougat, including the different message bubbles types and the background change settings. It is now simply white and blue and you couldn't change it.
I have had a hard time fixing the Notification problem Oreo brought to many apps, including system, resulting in oversleeping for alarm clock app not working at all. This may not be a particular problem of ZTE directly since apparently it is an Oreo issue but I still don't understand why so many notifications have been forced to the swipe-down menu without default option to disable them. Like "this and this process running in the background" and using default notification tone for every single thing happening to the phone. Adjusting settings in Android System notification modes solved some problems but delayed or not showed at all certain notifications like SMS messages or alarm clock not working - even though these were specifically made to pop and make sound.
Battery life for me varies. It may be up to 10-12 hours if I don't do almost anything and just keep it in stand-by to 3-4-5 hours if I use the screen, some browsing and listening to music. Screen-on-Time in general is up to 2-3 hours in best case scenario. Also sometimes for no apparent reason I see the battery percentage going down like every few seconds by 1 percent and with no use of anything special, just the screen. Overall I could rate it (a little) worse than Nougat considering that I've now gone through all Power settings and disabling anything I don't need per app.
I can only congratulate ZTE for making Dolby Atmos now working on both earphones and front speakers at all times, including with custom player equalizer running at the same time as Dolby Atmos. It never worked for me and was also accompanied with various bugs on all 6, 6.1, 7 and 7.1.
The "choose what your SD card should do" on every restart is pretty bad and I strongly prefer the Nougat behavior when it simply worked. Maybe adding a Setting - "do not ask again" or an option in the System Settings where you can change the status of the SD card on the go would work better than unmounting it every time. This causes many issues with file managers, players and different other apps with files located on the SD card. I hope they re-work it.
Finally, I noticed that Ultra Power Saver works in a much worse way than it did on Nougat. It kind of goes into another OS mode upon return from which it does not start apps that are set to auto-start upon reboot. The Nougat style of simply black-and-whit-ening the screen and turning off any data was so much better and didn't return the phone in a half-functioning state when connected to the charger. Also at 15% as I adjusted it, the middle power saving function (Power Saver or so) does not seem to be at least visibly working so the battery keeps draining as fast as if it was not on.
So, in short - dark(er) Quick Menu, getting back Nougat default app customization options, fixing the SD card message upon every reboot, not forcing TouchPal to be default keyboard or in use even if another keyboard is chosen, or disabling both, and possibly working on better battery life would be all amazing. I still think ZTE did a great job with 8.0 and am happy they finally released it to us.
The phone was frozen and restarted several times.
After that, fingerprint doesn't work and I had to reconfigure fingerprint record.
Anybody received this update?
Popped up today on my watch.
Didn't read the changelog, so i am trying to find it.
I updated and having issues with upper and lower buttons. When watch is awake pushing upper button takes me to last watch screen to the right, not as previously one by one. Pushing lower button doesn`t work at all. On 2.3.7. everything worked fine. I tried unpair and pair again, but the same problem is still present. Help someone?
Amazfit OS update log
Version: 2.3.8.0
Applicable equipment: Amazfit Stratos/Stratos +
- Update GPS firmware for more stable location service
- Update indoor running algorithm (recalibration of mileage)
- Added news notification support for Korean and Thai
- Added "3 data big words" - 3 data fields display mode for sports interface
- Added outdoor swimming automatic segmentation settings
- Added "Sports Reminder" - can be found at:
Settings on the watch > General > Sports Reminder
1. Sports start reminder: automatically recognize the running and walking mode after opening, will remind the corresponding sports mode after 5 minutes of activity, and save the official data before;
2. End of motion reminder: automatically recognizes the end state of running and walking after opening, reminds the end after 10 minutes of the end of the activity and automatically pauses the movement.
- Added music playback control function during sports (the watch will display the control screen on the last screen after the music is played)
- Optimize motion center rate accuracy
- Optimize connection stability for iOS devices
- Optimize emoji expression display (temporarily does not support non-standard emoji expressions, such as partial expressions of WeChat)
- Optimize the mileage display after the end of swimming
- Watch button functionality changes:
1. When using daily functions;
a. Short press on the upper button to return to the dial directly on any interface, press the list of applications on the dial interface;
b. Short middle button functionality unchanged;
c. Lower button press to change to the previous layer interface on any interface. If the current tab is at the widgets layer, return directly to the dial.
2. After unlocking in sports
a. Press upper button to alter motion;
b. Middle button short press is for selection;
c. Short press the button to change the motion control option. The option can be cycled.
- Widget layout adjustments
1. The right side of the dial becomes only up to two widgets, and the rest are placed in the watch application list (need to wait for the latest App push);
2. The “sports record” on the left side of the dial is moved into the watch application list.
- Optimized in motion interface
1. Increase the motion control interface in the interface during the movement, and slide to the right by sliding in the movement;
2. After pausing, support to switch to other motion data interface by sliding.
- Repairing abnormal work problems that may occur with watches in low temperature environments
- Fix the problem of swimming to calculate the number of steps
- Fixed some translation errors in English, French, and Italian
- Bug fixes
Don't update to this version. The new button functions seem to be really crappy.
I updated and hate it! Several good new options, but new buttons concept is awful!
SteffenBerlin said:
Don't update to this version. The new button functions seem to be really crappy.
Click to expand...
Click to collapse
I wouldn't say it's crappy, just something to get used to. If button layout were like that from the start you wouldn't even think about it. The change is just fine although I would like if they could be remapped or better yet remapped depending on the app.
But another issue in this version for me is that apk watchfaces do not work for me in sleep mode. It just shows blank screen. Anyone with this issue?
I just updated but it gives me problems with the watchface in standby of greatfit.
When unlocked the greatfit watchface is working but when locked the original or last selected watchface is showing.
Anyone got a fix?
Before the button layout was easy and effective. Upper and lower button for cycling thougth lists. Long press upper button for back. Now touchscreen has to be used. Buttons are almost useless. For Stratosfied I found a way to undo the new button layout. https://forum.xda-developers.com/sm...stratosfied-amazfit-amazfit-2-t3758506/page84 But it needs temporary root. How to get this? I already saw a lot of complains about the new button layout here and in Chinese forum. I should have read the update log completely before updating...
dude-nl said:
I just updated but it gives me problems with the watchface in standby of greatfit.
When unlocked the greatfit watchface is working but when locked the original or last selected watchface is showing.
Anyone got a fix?
Click to expand...
Click to collapse
Yeah, blank screen was showing to me in sleep mode when watch was restarted with non working apk watchface selected. But yes, some apk watchfaces (not all) also don't work for me in sleep mode anymore and is showing as you said last selected working watchface when in sleep mode or some other.
There is still Amazfit phone app that needs to be updated to reflect these firmware changes but nothing should change anyway.
TumiBC said:
Yeah, blank screen was showing to me in sleep mode when watch was restarted with non working apk watchface selected. But yes, some apk watchfaces (not all) also don't work for me in sleep mode anymore and is showing as you said last selected working watchface when in sleep mode or some other.
There is still Amazfit phone app that needs to be updated to reflect these firmware changes but nothing should change anyway.
Click to expand...
Click to collapse
On latest firmwares, US and CN, all watchfaces based on GreatFit don't work on standby mode and they need an update.
To disable the new key mapping, check this if you have unlocked bootloader: https://forum.xda-developers.com/smartwatch/amazfit/mod-amazfit-stratos-2-3-8-0-disable-key-t3890560
TumiBC said:
Yeah, blank screen was showing to me in sleep mode when watch was restarted with non working apk watchface selected. But yes, some apk watchfaces (not all) also don't work for me in sleep mode anymore and is showing as you said last selected working watchface when in sleep mode or some other.
There is still Amazfit phone app that needs to be updated to reflect these firmware changes but nothing should change anyway.
Click to expand...
Click to collapse
Yup. Same problem here. None of the APK watchfaces seems to be working now, and the buttons are pointless. 2.3.8. is the worse update ever. 2.3.7.0 was great, everything finally worked for me.
As far as I remember if you unlocked the watch and swiped up to the quick settings menu and tapped the weather it brought up the 5-day weather forecast. Is it just me or this also stopped working with the new firmware?
The new firmware is by far better in indoor (treadmill) exercise that before.
The estimated mileage is much more close to reality.
The pace calculation was practically useless in the previous version but now it is much, much better.
On the other hand, the changes they did to the buttons use, is awful for me...
Before I bought the watch, I have checked the official info in the app in Help/Amazfit Stratos where I could read what the buttons do (it is still there, btw). I made myself sure that I can fully control the device using only the buttons which is of fundamental importance to me (operating in rain/snow with gloves, etc).
I would NEVER buy a watch without such obvious (to me) functionality. Therefore, from my point of view the new firmware "update" made the watch unusable.
If that's important to you as well, do not update.
Same here. 3 buttons were a big selling point. Now they made them useless. Can't image why because it is not the native behavior of their UI. When pressing the upper button one can see scrolling over all widgets. However on all firmwares they have rolled out the new button layout users complain. But they stick on it.
I had tried to get into the new button arrangement. It is usable together with swiping indoor but total useless outdoor with gloves or at swim pool. That is totally lame.
Good. I still can return watches to seller.
With new firmware training load is not calculated any more. It is just 0. Anyone experienced same?
SteffenBerlin said:
With new firmware training load is not calculated any more. It is just 0. Anyone experienced same?
Click to expand...
Click to collapse
No, it works.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my OnePlus5
jacolagwa said:
Before I bought the watch, I have checked the official info in the app in Help/Amazfit Stratos where I could read what the buttons do (it is still there, btw). I made myself sure that I can fully control the device using only the buttons which is of fundamental importance to me (operating in rain/snow with gloves, etc).
I would NEVER buy a watch without such obvious (to me) functionality. Therefore, from my point of view the new firmware "update" made the watch unusable.
If that's important to you as well, do not update.
Click to expand...
Click to collapse
I agree, new buttons concept is useless outdoor by bad weather like snow and rain.
Developper should better work on fix thinks that does not work (like lap time) than destroying what works good.
@Wechy77: Thanks, yesterday it didn't calculate but today it did. I did not reboot nor factory reset. Hopefully it was only a temporary problem.