Related
Hey everyone!
I read everywhere online that the 3/3T and the 5 share *very* similar screens. So similar, in fact, that they may very well have exact identical dimensions as well as being 2.5D.
So...with that in mind...
Anyone think the 3/3T screen protectors will fit the 5? Cases won't since the 5 is thinner, but maybe the SPs ?
Thoughts?
TopperCNC said:
Hey everyone!
I read everywhere online that the 3/3T and the 5 share *very* similar screens. So similar, in fact, that they may very well have exact identical dimensions as well as being 2.5D.
So...with that in mind...
Anyone think the 3/3T screen protectors will fit the 5? Cases won't since the 5 is thinner, but maybe the SPs ?
Thoughts?
Click to expand...
Click to collapse
I think the phone is gonna have the same problem the 3t had. There won't be any good choices. Even the official one for the 5 has the same black border that caused blocked pixels on the 3t official tempered glass screen protector. Are those black borders really necessary?
vandizzam said:
I think the phone is gonna have the same problem the 3t had. There won't be any good choices. Even the official one for the 5 has the same black border that caused blocked pixels on the 3t official tempered glass screen protector. Are those black borders really necessary?
Click to expand...
Click to collapse
Yeah, I know. For my 3/3T, I had finally *settled* on a Best Skins Ever (same as ZAGG) since it would stick everywhere and had no halo effet. Not glass, but still not so bad.
There's nothing out yet for the 5 so I was hoping to order another 3/3T Best Skins Ever for my 5.
Different screen protectors.
TopperCNC said:
Yeah, I know. For my 3/3T, I had finally *settled* on a Best Skins Ever (same as ZAGG) since it would stick everywhere and had no halo effet. Not glass, but still not so bad.
There's nothing out yet for the 5 so I was hoping to order another 3/3T Best Skins Ever for my 5.
Click to expand...
Click to collapse
does the "best skins ever" screen protector and the body protector stick on the 3T properly?
i tried tempered glass and regular screen protector but all came off on the edges because of the 2.5D.
satand said:
does the "best skins ever" screen protector and the body protector stick on the 3T properly?
i tried tempered glass and regular screen protector but all came off on the edges because of the 2.5D.
Click to expand...
Click to collapse
It does. It's very nice, much more so than half-assed 2.5D glass protectors with halo and dot matrix effects.
Can't speak for the body protector as I'm only using their screen protector (I use a Spigen case for the body).
If you have ever used ZAGG protectors, they're the same.
They're a wet application, as well, so that's something to consider if you're not cautious.
wwwhershcom said:
Different screen protectors.
Click to expand...
Click to collapse
That's a shame
TopperCNC said:
Yeah, I know. For my 3/3T, I had finally *settled* on a Best Skins Ever (same as ZAGG) since it would stick everywhere and had no halo effet. Not glass, but still not so bad.
There's nothing out yet for the 5 so I was hoping to order another 3/3T Best Skins Ever for my 5.
Click to expand...
Click to collapse
TopperCNC said:
It does. It's very nice, much more so than half-assed 2.5D glass protectors with halo and dot matrix effects.
Can't speak for the body protector as I'm only using their screen protector (I use a Spigen case for the body).
If you have ever used ZAGG protectors, they're the same.
They're a wet application, as well, so that's something to consider if you're not cautious.
Click to expand...
Click to collapse
is the whole screen covered? could you share a picture of the phone with the screen protector?
satand said:
is the whole screen covered? could you share a picture of the phone with the screen protector?
Click to expand...
Click to collapse
Whole screen covered, yes.
I'm at work right now and only have my own phone as a camera, so when I get back home, I'll use my extra phone to snap a pic and share tomorrow.
TopperCNC said:
Whole screen covered, yes.
I'm at work right now and only have my own phone as a camera, so when I get back home, I'll use my extra phone to snap a pic and share tomorrow.
Click to expand...
Click to collapse
thanks in advance!
TopperCNC said:
It does. It's very nice, much more so than half-assed 2.5D glass protectors with halo and dot matrix effects.
Can't speak for the body protector as I'm only using their screen protector (I use a Spigen case for the body).
If you have ever used ZAGG protectors, they're the same.
They're a wet application, as well, so that's something to consider if you're not cautious.
Click to expand...
Click to collapse
If it's the same as Zagg, does that mean that it has the orange peel effect too?
Sent from my Moto G (4) using Tapatalk
purple lady said:
If it's the same as Zagg, does that mean that it has the orange peel effect too?
Sent from my Moto G (4) using Tapatalk
Click to expand...
Click to collapse
Yes, same orange peel as ZAGG. I don't mind it too much, though, as it's not that bad, but definitely nowhere near as nice as a tempered glass SP.
Here's the pic that you requested
satand said:
is the whole screen covered? could you share a picture of the phone with the screen protector?
Click to expand...
Click to collapse
Here's a picture of my OnePlus 3T with the BSE on.
It's been applied for about 5 months, now, with general use.
There are no bubbles, I just couldn't be bothered to dust it before snapping the pic
http://imgur.com/R5ACtLs
TopperCNC said:
Yes, same orange peel as ZAGG. I don't mind it too much, though, as it's not that bad, but definitely nowhere near as nice as a tempered glass SP.
Click to expand...
Click to collapse
Thanks. I hate the orange peel. It's very annoying to me.
purple lady said:
Thanks. I hate the orange peel. It's very annoying to me.
Click to expand...
Click to collapse
I hear you on the orange peel... On my "flat" screened phones, I always use glass SPs, but since the OP3/3T were curved, I preferred orange peel over having ****ty halo effect and dot matrix and lifting corners and what-have-you...
I wished the OP5 would have a flat screen, but alas, it's not the case
TopperCNC said:
I hear you on the orange peel... On my "flat" screened phones, I always use glass SPs, but since the OP3/3T were curved, I preferred orange peel over having ****ty halo effect and dot matrix and lifting corners and what-have-you...
I wished the OP5 would have a flat screen, but alas, it's not the case
Click to expand...
Click to collapse
So there's no perfect phone? I was looking at the S8, but I don't like the curved screens. The Oneplus isn't curved much is it? I'm very sensitive to light and have to use an anti glare screen protector or else my vision goes double.
I wonder if @intelliARMOR will develop a screen protector for the OnePlus 5. Got their products for my old Nexus 6P and the quality and customer support was simply amazing! I've seen they already have a protector for the 1+3, maybe they'll update their intelliGLASS for this occasion.
purple lady said:
So there's no perfect phone? I was looking at the S8, but I don't like the curved screens. The Oneplus isn't curved much is it? I'm very sensitive to light and have to use an anti glare screen protector or else my vision goes double.
Click to expand...
Click to collapse
OnePlus screens have been working fine for me, however I simply wish it was easier to find decent glass SPs.
Maybe OnePlus 6
Robdyx said:
I wonder if @intelliARMOR will develop a screen protector for the OnePlus 5. Got their products for my old Nexus 6P and the quality and customer support was simply amazing! I've seen they already have a protector for the 1+3, maybe they'll update their intelliGLASS for this occasion.
Click to expand...
Click to collapse
Agreed, their glass SP was perfect on my 6P. However, the 6P also had a flat glass screen, which the OP5 does not
vandizzam said:
I think the phone is gonna have the same problem the 3t had. There won't be any good choices. Even the official one for the 5 has the same black border that caused blocked pixels on the 3t official tempered glass screen protector. Are those black borders really necessary?
Click to expand...
Click to collapse
I can confirm the official TGSP for the 5 has the same pixel blocking issue. I didn't own a 3/3T, but I did just look up the photo of what you mentioned, and sure enough, I've got the same issue. Wish Orzly would make a completely transparent one like their one for the OPO (rocked it from October 2014 until now and it's been perfect).
I've recently purchased some black glass screen protectors from CASEBASE.
Fitment is perfect no issues for me.
I do believe they are thinner than others or at least 1 of the thinnest.
They are £6.99 for 2 on ebay.
Just giving you the heads up to protect your op5's
If you found this useful tap thanks
Managed to take some photos on a budget tablet (sorry if pictures are not very good quality)
Looks good.
Can't believe the screen protector supplied with my OP5 is shows signs of peeling. I haven't even taken it out of the box yet!
L22EEW said:
Looks good.
Can't believe the screen protector supplied with my OP5 is shows signs of peeling. I haven't even taken it out of the box yet!
Click to expand...
Click to collapse
Wow that's terrible!
No peeling on this what so ever and it seems to fill the screen more than that 1.
I've never applied a tempered glass before. Easy enough?
I remember trying to apply a screen protector to my LG G2 once, such a nightmare, to avoid those little air bubbles.... lol.
vimto25 said:
Managed to take some photos on a budget tablet (sorry if pictures are not very good quality)
Click to expand...
Click to collapse
That looks pretty good. I've bought some to try. At £6.99 for two it is worth the risk.
Is there any overlap/loss of visible screen?
L22EEW said:
Can't believe the screen protector supplied with my OP5 is shows signs of peeling. I haven't even taken it out of the box yet!
Click to expand...
Click to collapse
Mine is exactly the same with a slight lift along the bottom edge of the screen. The 3T I had briefly was much worse as the lift was top and bottom.
It's the curse of the 2.5D screen and a slightly misaligned or badly sized protector.
ChrisJ said:
Mine is exactly the same with a slight lift along the bottom edge of the screen. The 3T I had briefly was much worse as the lift was top and bottom.
It's the curse of the 2.5D screen and a slightly misaligned or badly sized protector.
Click to expand...
Click to collapse
Yep, I guessed that.
The protector on my OP3 thought it still firmly in place. No lifting anywhere.
L22EEW said:
I've never applied a tempered glass before. Easy enough?
I remember trying to apply a screen protector to my LG G2 once, such a nightmare, to avoid those little air bubbles.... lol.
Click to expand...
Click to collapse
Very easy especially With the cut outs. I make sure the screen is on so u can allign it better.
ChrisJ said:
That looks pretty good. I've bought some to try. At £6.99 for two it is worth the risk.
Is there any overlap/loss of visible screen?
Mine is exactly the same with a slight lift along the bottom edge of the screen. The 3T I had briefly was much worse as the lift was top and bottom.
It's the curse of the 2.5D screen and a slightly misaligned or badly sized protector.
Click to expand...
Click to collapse
No I've not noticed any loss of screen none that I'm aware off as I make sure the screen is lit up when I'm installing it.
There's certainly no lift it fits perfect.
Hopefully some other buyers will be able to give there opinion on it too soon.
Hello,
there is glue just on the black side of the glass or everywhere (even in the middle) ?
Beside when you look at your phone with a white background, is there some oil effect ?
I got a glass from Orzly and i got all those issues...
styvenp said:
Hello,
there is glue just on the black side of the glass or everywhere (even in the middle) ?
Beside when you look at your phone with a white background, is there some oil effect ?
I got a glass from Orzly and i got all those issues...
Click to expand...
Click to collapse
The CaseBase is very similar to the Orzly. Keep an eye out for my video coming soon!
niijonodhg said:
The CaseBase is very similar to the Orzly. Keep an eye out for my video coming soon!
Click to expand...
Click to collapse
Ok thanks, I will check that
styvenp said:
Ok thanks, I will check that
Click to expand...
Click to collapse
Here:
There is still a rainbow effect unfortunately. From reviews of the orzly that also has the rainbow effect. Maybe there will be revisions to eliminate this we hope so anyway.
niijonodhg said:
Here:
Click to expand...
Click to collapse
Do you find the screen hard to see in sunlight with this protector on? I seem to struggle to see and brightness is on full. Also I have started to see some bleed on the edges. Do you think the CASEBASE is exactly the same as orzly ? As if orzly is better I might purchase that.
vimto25 said:
There is still a rainbow effect unfortunately. From reviews of the orzly that also has the rainbow effect. Maybe there will be revisions to eliminate this we hope so anyway.
Click to expand...
Click to collapse
No, there will be not. Okay well if they change adhesive/glue type.
Working thing would need to entire tgsp be adhesive. Or maybe Whitestone style, they have somekind of different glue system which you dry with UV lamp.
But really oil slick comes because glass is just touching screen part thanks to glue on the sides only. So it leaves really small gap between tgsp and glass and if you havent cleaned your screen like some sort un-humam/robot which is really impossible, there will be oil slick.. Maybe not right after you have installed it but soon. Some manufacters (like Orzly) makes "dots" to prevent oil slick. It basically lift really really littlebit tgsp from phone's glass surface so tgsp wouldnt touch screen surface. But then people are crying about visible annoying dots on tgsp.
Thats why Oneplus official tgsp is adhesive from entire glass. But because of OP3/3T/5 style (glass starts bending before screen ends) they needed to cut about 0.4mm from both side with protectors black borders to not produce halo.
So none of methods what different manufacter use, isnt good enough...
Oh i forgot ones without black borders. Either they will end before screen ends or they will cover entire screen but leaves on sides.
Sent from my OnePlus5 using XDA Labs
They had the matrix dots on the CASEBASE but they don't seem to help the rainbow affect. Whitestone is the way to go I was tempted to get that kit for my s8+ but I found a protector that worked for the s8 even with its big curve.
I'm very surprised there isn't any perfect 1s for oneplus 5. The CASEBASE is close but not quite there. Fitment in it is good.
I think I'll end up with some tpu on it ?
vimto25 said:
They had the matrix dots on the CASEBASE but they don't seem to help the rainbow affect. Whitestone is the way to go I was tempted to get that kit for my s8+ but I found a protector that worked for the s8 even with its big curve.
I'm very surprised there isn't any perfect 1s for oneplus 5. The CASEBASE is close but not quite there. Fitment in it is good.
I think I'll end up with some tpu on it ?
Click to expand...
Click to collapse
Yeah dots should theoretically help on oil slick and prevent them but it wont delete those entirely and my personal opinion is that it wont help at all.
Orzly's last year model for 3/3T had also dots and oil slick so im not confident that it would be better for this They still have dots, thats what i know for sure
Sent from my OnePlus5 using XDA Labs
I had the same protector and after a few days i had a lot of dust and tabac particles under the class. Have it completely removed,.... see the attached image
Flash-User said:
I had the same protector and after a few days i had a lot of dust and tabac particles under the class. Have it completely removed,.... see the attached image
Click to expand...
Click to collapse
What company the tempered glass is of?
I've been reading all the threads in the forum after I brought my OP 5 yesterday (supposed to arrive to me in the next 2 weeks) and I cant find any solid recommendation.
There aren't any brands making screen protectors to our devices and even less reviews.
-I saw people saying to stay away from the original screen protector made by Oneplus due to the few millimeter lost cause by it.
-I looked on the Orzly screen protector and it looked quiet well but after searching the web I saw multitude negative reviews due lack of adhesiv, dot metrix and rainbows showing up on the screen. but some other who claims the protector is completely fine
In conclusion: In the Glass screen protectors section, there is no good product that will be fine with guarantee ?
If so, there is any other kind of screen protector (not glass one's) such as Skinomi or IQ Shield that are recommended?
I have to order any kind of screen protector as soon as possible before my device will arrive.
thanks for your professional support !
Every single option, glass or TPU, sucks. The best option is the non-glass protector that ships applied to the phone. Baby that one as long as you can.
Goronok said:
Every single option, glass or TPU, sucks. The best option is the non-glass protector that ships applied to the phone. Baby that one as long as you can.
Click to expand...
Click to collapse
I would agree with you, when it wouldn't collect more dust than a vacuum cleaner.
GTI86 said:
I would agree with you, when it wouldn't collect more dust than a vacuum cleaner.
Click to expand...
Click to collapse
Still the best, even covered in 2" of lint lol
As much as the screen protectors suck, the Orzly is stil the best of the bunch. I have it installed with no rainbow effect in the middle. Again, I think this is a case of people who have the issues are the ones you see. It depends on how you install it I guess. I know a few others who have also installed it without the rainbow, but I know people who have installed it and have had the rainbow. At least it is a fully screen protector, that doesnt cut off a millimeter of the screen basically, and at least they aren't a company that blames the user for obvious issues with their TGSP *cough* Oneplus *cough*
Take it from someone who has been through 5+ different screen protectors... About the only one that was semi worth a damn was Orzly. You run into ones that don't fill the entire screen and leave the edges exposed, don't stick, cover the front camera or ones that just flat out don't end up sticking. I wish I didn't end up taking off the one that the OP5 came shipped with but oh well lesson learned. As I said as of right now the only semi decent one is Orzly but even that one I had issues with the glue towards the edges peeling so the screen wouldn't respond because the protector was coming off the screen a little. Still though - Orzly or Manufacturer screen that was originally on the one are your best options at this point.
I really like the IQ branded film protector. I've had no problems with it and I only really notice it when I swipe along the edges and feel the film.
xeonyxorich said:
I really like the IQ branded film protector. I've had no problems with it and I only really notice it when I swipe along the edges and feel the film.
Click to expand...
Click to collapse
do you use the clear protector or the matte one?
how does it feel ? smooth enough? fingerprints residue ?
you dont have problems using it with cases?
liadatz said:
do you use the clear protector or the matte one?
how does it feel ? smooth enough? fingerprints residue ?
you dont have problems using it with cases?
Click to expand...
Click to collapse
I'm using the clear one. It's definitely not as smooth as glass but it's smooth enough. It's more smooth than a glass screen without a oleophobic coating. Fingerprint residue is minimal. The only case I have is the sandstone one from OnePlus and I have no problems with it.
xeonyxorich said:
I'm use the clear one. It's definitely not as smooth as glass but it's smooth enough. It's more smooth than a glass screen without a oleophobic coating. Fingerprint residue is minimal. The only case I have is the sandstone one from OnePlus and I have no problems with it.
Click to expand...
Click to collapse
Using the clear IQ protector here too. So far it's the best I've found. I've used the official TGSP, Orzly TGSP, and a couple other cheaper TGSPs. The wet application film screen protectors are the way to go for this phone it seems. Helps a lot with finger prints and I haven't had any issues with it not being slick enough.
think ill just go nude and use a thick case lol. haven't had any scratches on my s8+ which also has gorilla glass 5.
man do i hate how all phones have curved glass of some sort.
Damn those curves.. Let's hope that maybe in a few weeks we will finally get a proper screen protector.
cdig said:
think ill just go nude and use a thick case lol. haven't had any scratches on my s8+ which also has gorilla glass 5.
man do i hate how all phones have curved glass of some sort.
Click to expand...
Click to collapse
I went and removed the factory installed protector, it was a bad idea. Now I have small hairline scratches on the bottom right corner. I've now ordered a tempered glass in Amazon to hide the scratches.
The one that came with the phone is fantastic imo. I haven't enjoyed tgsp since my nexus 6p because of the 2.5D curved glass craze, no tgsp fits any phone good anymore. Axon, Samsung (ROFL, you thought OUR screen was bad?) , I haven't looked at the screen protectors for the G6, but the screen doesn't appear to be 2.5d so that's a step in the right direction..
When my stock screen protector gets unusable, I'll buy the 30$ crash guard from rhinosheidl ?????? Just to see if the hype is real...
Unless someone already has photos of it....
MrWilsonxD said:
The one that came with the phone is fantastic imo. I haven't enjoyed tgsp since my nexus 6p because of the 2.5D curved glass craze, no tgsp fits any phone good anymore. Axon, Samsung (ROFL, you thought OUR screen was bad?) , I haven't looked at the screen protectors for the G6, but the screen doesn't appear to be 2.5d so that's a step in the right direction..
When my stock screen protector gets unusable, I'll buy the 30$ crash guard from rhinosheidl Just to see if the hype is real...
Unless someone already has photos of it....
Click to expand...
Click to collapse
Any idea when the crashguard is shipping. I don't wanna drop that type of money without looking at reviews.
A Guy Called Revive said:
Any idea when the crashguard is shipping. I don't wanna drop that type of money without looking at reviews.
Click to expand...
Click to collapse
No idea whatsoever, my stock screen protector from oneplus is still in fantastic shape, so I don't imagine ordering four a couple more months at least.
The ones for the oneplus 3 are 13 dollars on amazon, and ship with prime in the US.. So I imagine in a few weeks the price will become more better.
I've recently seen this on the taobao site. GOR branded TSP. I've used their flat ones on other phones and am quite satisfied with the performance. They have 2 versions, one with the black border, one with a edge sealant sort of thing. I'm planning to get the sealant version next month since my option to add items for cheap shipping is exhausted for July....
If anyone's in China or has bought one, some feedback would be appreciated.
https://m.intl.taobao.com/detail/detail.html?id=554613982294
Sent from my ONEPLUS A5000 using Tapatalk
A Guy Called Revive said:
Any idea when the crashguard is shipping. I don't wanna drop that type of money without looking at reviews.
Click to expand...
Click to collapse
https://rhinoshield.io/products/oneplus-5-bumper-case?variant=35872333313
RhinoShield should be out by second half of August according to their site.
failure_2_win said:
https://rhinoshield.io/products/oneplus-5-bumper-case?variant=35872333313
RhinoShield should be out by second half of August according to their site.
Click to expand...
Click to collapse
that's only their bumper.
they are already sending out screen protectors.
i just received mine.
will send it back right away.
waaaay to small, doesn't even cover the display correctly.
Dinjesk said:
that's only their bumper.
they are already sending out screen protectors.
i just received mine.
will send it back right away.
waaaay to small, doesn't even cover the display correctly.
Click to expand...
Click to collapse
Its says in the description, "Not edge to edge protection. (NOT FULL COVERAGE)" so there is no false advertising
What screen protector are you going for?
Lots of unknown and untested brands out there. I'm looking for thet tempered glass protection out there that doesn't break the bank.
No Idea, let's see how good the preapplied Protector is. On my prior P9 Lite it lasted 5 Month before i saw some little Scratches.
Psierra117 said:
No Idea, let's see how good the preapplied Protector is. On my prior P9 Lite it lasted 5 Month before i saw some little Scratches.
Click to expand...
Click to collapse
True, now you mention it the pre-applied screen protector is a brilliant thing to have. It saves us all those early super dread moments while we get accustomed to a larger, slipper and more fragile device ( I come from an all metal, smaller yer sturdier HTC 10). But, as you say it's only a short fix, I'd like to have replacement at the ready for when the scratches do evidently appear.
I think use the preapplied as long as it works. In 5-6 Months the Market will be flooded with good working Screen Protectors, Cases etc.
Deano1889 said:
What screen protector are you going for?
Lots of unknown and untested brands out there. I'm looking for thet tempered glass protection out there that doesn't break the bank.
Click to expand...
Click to collapse
I'm currently looking at this https://www.ultimateshield.co.uk/collections/huawei-p20-pro
I have used ultimate shield before and they've worked well. It's out of stock now. The page is mostly a placeholder until the phone is released. So hopefully it'll be available soon.
Mobile fun have official accessories listed https://www.mobilefun.co.uk/huawei/p20-pro
Anybody have news if rhinoshield is gonna release for the P20 pro?
I purchased this screen protector here in the UK as I didn't want a mis-alignment of the tinted ones to affect the front camera or sensors: https://www.amazon.co.uk/gp/product/B07BLQHY5X
It is really good. I did use the glue that comes with it to bond the glass together to the screen to fill in the air gaps, does a great job. It is very light as I accidentally touched some of it and put some on the screen that I simply wiped off. i.e. not like super glue!
Also there are 2 of each item inside just incase or for future.
twe69 said:
I purchased this screen protector here in the UK as I didn't want a mis-alignment of the tinted ones to affect the front camera or sensors: https://www.amazon.co.uk/gp/product/B07BLQHY5X
It is really good. I did use the glue that comes with it to bond the glass together to the screen to fill in the air gaps, does a great job. It is very light as I accidentally touched some of it and put some on the screen that I simply wiped off. i.e. not like super glue!
Also there are 2 of each item inside just incase or for future.
Click to expand...
Click to collapse
How is it holding up I heard that glue comes off
dryspuri said:
How is it holding up I heard that glue comes off
Click to expand...
Click to collapse
Initially when I applied it there were slight air gaps all the way round, but much better than no glue of about half a centimetre gap. However overnight all air gaps disappeared and it's perfectly flat right now. No issues so far, really loving it. Obviously lets see in a months time how it goes.
When this comes into stock:
https://www.amazingat.com/products/amazingthing-huawei-p20-pro-03mm-fully-covered-supremeglass
Alternatively contact them to enquire on availability.
6 months on and I'm yet to find a screen protector that I'm entirely happy with.
I've tried these via Amazon:
G-Color Huawei P20 Pro Screen Protector, [Updated Version] 9H Hardness Tempered Glass
OMOTON Huawei P20 Pro Screen Protector - Full Coverage Tempered Glass Screen Protector - [
Ibywind 2PCS Pack Huawei P20 Pro Screen Protector,**Bubble Free Installation Applicator:
G-Color is the best of the bad bunch as it's full adhesive. The issue I have is that it seems to scratch more easily than others and the black surround is slightly wider than that on the device so when viewing white pages you notice that some of the screens is slightly hidden under the edge of the screen protector.
Anyone got any other recommendations?
I use nillkin tempered glass 0.2mm. With my UAG plasma, Ringke Fusion X and Spigen rugged armor case.
Pros: No airlifts, No fingerprint smudges
Cons: Easily chips on the sides.
Already on my 2nd nillkin tempered glass.
hth.
Just bought this two from Aliexpress. The front one is HydroGel screen protector. It is very soft plastic but covers the entire screen. They said the plastic self-healing. True enough, the surface feels like the back of my old LG G Flex 2 (which also have the self-healing coating). I try to make few scratches and they slowly disappeared. As you can see in the first attachment, it is almost invisible and covered all the corners and curves.
For the back, it is transparent 3D carbon fiber vinyl. Really pleased how it turns out.
spiderx_mm said:
Just bought this two from Aliexpress. The front one is HydroGel screen protector. It is very soft plastic but covers the entire screen. They said the plastic self-healing. True enough, the surface feels like the back of my old LG G Flex 2 (which also have the self-healing coating). I try to make few scratches and they slowly disappeared. As you can see in the first attachment, it is almost invisible and covered all the corners and curves.
For the back, it is transparent 3D carbon fiber vinyl. Really pleased how it turns out.
Click to expand...
Click to collapse
For front screen protector - which one? Link please, as they are many on Aliexpress...
Thanks in advance, Mat
bratusm said:
For front screen protector - which one? Link please, as they are many on Aliexpress...
Thanks in advance, Mat
Click to expand...
Click to collapse
This is the one I ordered. But on aliexpress, all the Hydrogel are more or less the same. nothing much different.
Click Here
spiderx_mm said:
This is the one I ordered. But on aliexpress, all the Hydrogel are more or less the same. nothing much different.
Click Here
Click to expand...
Click to collapse
How is your hydrogel-film holding up?
I'm looking in to buying some for myself.
spiderx_mm said:
This is the one I ordered. But on aliexpress, all the Hydrogel are more or less the same. nothing much different.
Click Here
Click to expand...
Click to collapse
just purchased one of these too. getting absolutely sick of trying screen protectors which affect the touch sensitivity of the p20 pro.
Troubled42 said:
just purchased one of these too. getting absolutely sick of trying screen protectors which affect the touch sensitivity of the p20 pro.
Click to expand...
Click to collapse
Applied correctly despite instructions being really unclear and still ended up with plenty of air bubbles trapped.
I guess I'll never find a screen protector for this phone lol
so, for a guy that just bought the phone, i have a q for ppl having the device longer..
how long did the pre applied screen protector lasted for you?
it is pretty good as i can see it for this few days of using the phone...
do i need to start searching for replacement immediately or i have still time? how long?
Dado111 said:
so, for a guy that just bought the phone, i have a q for ppl having the device longer..
how long did the pre applied screen protector lasted for you?
it is pretty good as i can see it for this few days of using the phone...
do i need to start searching for replacement immediately or i have still time? how long?
Click to expand...
Click to collapse
I have the phone for about 10 months and I still have the pre applied screen protector. It began to deattach after I dropped it few times on the floor, otherwise it would have lasted forever, I suppose
Hello,
I'm looking for a good film screen protector, I'm not a fan of tempered glass. I got some protectors off Amazon, but they are really bad. As in they don't look uniform, rather porous, especially when observed in sunlight. Plus it's difficult to slide the finger, impossible if the finger is moist for whatever reason. The most annoying thing about them is that using OP gestures navigation hurts my finger, because the protector's bottom edge is rather sharp and the finger hooks on it. The factory installed protector was good, but it was easily scratched in the pocket and I had to replace it.
People tend to recommend one from Gadgetshieldz, can someone confirm it's free from the mentioned downsides?
use protectionfilms24 web site. they have good quality film
You should try Gadgetshieldz
I can confirm that it is the most amazing screen guard you will ever use. I have been using it for many years now, And I do not recommend any other brand. I have experienced it for years now. That product has no downside.
Michealviens said:
I have been using gadgetshieldz screen protector for quite a while now and didn’t face any issues like the one you mentioned above.
Click to expand...
Click to collapse
Did you got a casefit one or normal?
Personally I've used Skinomi skins on my last two devices because they're case-friendly and because Skinomi truly will send you free replacement screen protectors for any reason. I like the one for the 6T because it doesn't include a thin strip of material above the front camera and rather follows the bottom of the teardrop shape. The downside to skins like these is that any really narrow sections quickly stretch out and become disgusting, but the Skinomi skin for the 6T doesn't include any such segments.
pankajkh said:
Did you got a casefit one or normal?[/QUOT
I have the normal one.
Click to expand...
Click to collapse
Michealviens said:
pankajkh said:
Did you got a casefit one or normal?[/QUOT
I have the normal one.
Click to expand...
Click to collapse
Thanks, and does the standard case (in the box) fit ?
Click to expand...
Click to collapse
Yes it fits perfectly.
Hello,
I found Spigen screen protection, but I don't have more idea.
I only suggest Gadgetshieldz because it has more good reviews and users.