Hello
I have an Amazfit pace A1602 with ROM Version 2.6.5.0 (Chinese) and with the TWRP recovery.
I am having a problem when trying to update it to 2.6.6 because of the TWRP.
So, can I flash the stock recovery only? I searched in many many threads, but most are old and outdated and have no answers. Do I need to reflash the entire firmware just to have stock recovery? I am afraid of this because since the libraries were updated to Stratos libraries, I have many watchfaces that are from stratos, and may stop the entire launcher when ROM boots (this is the reason I have TWRP, I couldn't boot because of a broken watchface... long story short)
So, does anyone know if I can and how to do it?
Thanks in advance.
otaviobravim said:
Hello
I have an Amazfit pace A1602 with ROM Version 2.6.5.0 (Chinese) and with the TWRP recovery.
I am having a problem when trying to update it to 2.6.6 because of the TWRP.
So, can I flash the stock recovery only? I searched in many many threads, but most are old and outdated and have no answers. Do I need to reflash the entire firmware just to have stock recovery? I am afraid of this because since the libraries were updated to Stratos libraries, I have many watchfaces that are from stratos, and may stop the entire launcher when ROM boots (this is the reason I have TWRP, I couldn't boot because of a broken watchface... long story short)
So, does anyone know if I can and how to do it?
Thanks in advance.
Click to expand...
Click to collapse
Unzip the attached file and copy recovery.img to the sdcard/internal memory of the watch, reboot into recovery
Code:
adb reboot recovery
When TWRP boots (here I may be a bit wrong) tap on Install and you should see a button to change from installing .zip files to .img, files, select recovery.img from sdcard, and flash it as Recovery, then reboot the watch.
This should flash stock recovery you should be able to update via OTA.
Or use fastboot:
Code:
fastboot flash recovery recovery.img
Saratoga79 said:
Unzip the attached file and copy recovery.img to the sdcard/internal memory of the watch, reboot into recovery
Code:
adb reboot recovery
When TWRP boots (here I may be a bit wrong) tap on Install and you should see a button to change from installing .zip files to .img, files, select recovery.img from sdcard, and flash it as Recovery, then reboot the watch.
This should flash stock recovery you should be able to update via OTA.
Click to expand...
Click to collapse
Worked Perfectly, thank you for your kindness in answering and attaching the file!
Also, I used Fastboot as suggested by @lfom, because I find very hard to click on TWRP in Pace. :silly:
Thank you both
otaviobravim said:
Worked Perfectly, thank you for your kindness in answering and attaching the file!
Also, I used Fastboot as suggested by @lfom, because I find very hard to click on TWRP in Pace. :silly:
Thank you both
Click to expand...
Click to collapse
Which would be the process for a stratos 2 watch?
Thanks
Enviado desde mi HMA-L29 mediante Tapatalk
Related
Hi! I was trying to root Nokia 1
I flash TWRP through fastboot and it worked! But the problem was I was unable to see my files there.I think because of encryption..
So, I accidentally factory reset my phone through TWRP and then, I was unable to boot into system again..
I was stuck in TWRP
So, I go to fastboot and flash stock_recovery.IMG and after that when I reboot. I am seeing a black screen. I can feel vibration when press home key or home + volume up/down. but screen is black
Please help...
abdul_manan said:
Hi! I was trying to root Nokia 1
I flash TWRP through fastboot and it worked! But the problem was I was unable to see my files there.I think because of encryption..
So, I accidentally factory reset my phone through TWRP and then, I was unable to boot into system again..
I was stuck in TWRP
So, I go to fastboot and flash stock_recovery.IMG and after that when I reboot. I am seeing a black screen. I can feel vibration when press home key or home + volume up/down. but screen is black
Please help...
Click to expand...
Click to collapse
Use micro SD card for twrp. You can't remove encryption just by factory reset. I know how to remove encryption on Nougat but that method doesn't work on Oreo. When you flashed TWRP flash SuperSU (not Magisk) then boot to system, after that boot to twrp recovery again and wipe factory reset and wipe internal storage. You have removed encryption. SuperSU needs to be updated to patch plat and non play file contexts to remove encryption on Oreo. Or someone can make flashable zip to remove encryption.
First find nb0 file for Nokia 1 and try to flash rom with OST.
SkaboXD said:
Use micro SD card for twrp. You can't remove encryption just by factory reset. I know how to remove encryption on Nougat but that method doesn't work on Oreo. When you flashed TWRP flash SuperSU (not Magisk) then boot to system, after that boot to twrp recovery again and wipe factory reset and wipe internal storage. You have removed encryption. SuperSU needs to be updated to patch plat and non play file contexts to remove encryption on Oreo. Or someone can make flashable zip to remove encryption.
First find nb0 file for Nokia 1 and try to flash rom with OST.
Click to expand...
Click to collapse
Thanks for the reply!
Can you please tell me where can I find the nb0 file of Nokia 1 with Android 8.1 Oreo Go edition TA-1047?
abdul_manan said:
Thanks for the reply!
Can you please tell me where can I find the nb0 file of Nokia 1 with Android 8.1 Oreo Go edition TA-1047?
Click to expand...
Click to collapse
currently it's not available, you need to wait someone to upload it.
Nokia1 uses MTK CPU right? If you can get the ota zip of the current update on your phone, you can extract the boot.img file then boot into download mode and type fast boot flash boot <boot.img file>
redweaver said:
Nokia1 uses MTK CPU right? If you can get the ota zip of the current update on your phone, you can extract the boot.img file then boot into download mode and type fast boot flash boot <boot.img file>
Click to expand...
Click to collapse
Can you please explain a little bit more!
How to get ota zip file? (My phone is not working as mentioned above)
Where can I get boot.img?
How to extract and where boot.img?
How to boot into download mode?
abdul_manan said:
Hi! I was trying to root Nokia 1
I flash TWRP through fastboot and it worked! But the problem was I was unable to see my files there.I think because of encryption..
So, I accidentally factory reset my phone through TWRP and then, I was unable to boot into system again..
I was stuck in TWRP
So, I go to fastboot and flash stock_recovery.IMG and after that when I reboot. I am seeing a black screen. I can feel vibration when press home key or home + volume up/down. but screen is black
Please help...
Click to expand...
Click to collapse
I'm having a kind of similar issue. I flashed twrp and now its stuck in a twrp loop. It boots only in twrp and not system. What should I do?
Ludba Amb said:
Can you please explain a little bit more!
How to get ota zip file? (My phone is not working as mentioned above)
Where can I get boot.img?
How to extract and where boot.img?
How to boot into download mode?
Click to expand...
Click to collapse
http://www.mediafire.com/file/0xgn9o0b711wcw0/Nokia_1_TA-1047_MT6735_V8.1.0_180401.zip
Stock Rom for 1047
Download it.
Extract boot.img from that
boot into download mode/recovery
adb reboot recovery
answers to all your questions.... not the answer to fix your problem I think... But have a go.
And last but not least... Please use the search option first or google instead of asking all questions at once.
Or try to get familiar with rooting first...…
good luck buddy.
hello everyone i have nokia 1 oreo go edition i don't have any idea how to root
please help me by sending links for :
1 ) nokia 1 (ta-1047 ) TWRP
2 ) nokia 1 custom rom
3 ) nokia 1 current rom (for security)
(remenber thats only model ta-1047)
seriously i want to root it because there are many issues like multitouch screen problem or missing some system apps and also device getting hot because the memory (ram) is lagging (1gb ram is not enough to run android oreo correctly 2018 )
{PLEASE HELP}
help me please !
can you send me a twrp for nokia 1 ta-1047
i need to root my device to dowoad custom rom
MyTH30 said:
I'm having a kind of similar issue. I flashed twrp and now its stuck in a twrp loop. It boots only in twrp and not system. What should I do?
Click to expand...
Click to collapse
Same here. Seems that the decryption does not work. Better make sure your phone is not encrypted before messing with twrp (3.2.3).
Be careful
Some Nokia 1 are a TA 1060 variant number and if you flash the wrong file you are going to have further problems.
The process to root and get TWRP on the nokias Is complicated enough without everyone suggesting wrong model variants / numbers.
I guarantee someone will download the wrong file for the wrong model and come here crying.
is this the real firmware?
inkepinkje said:
http://www.mediafire.com/file/0xgn9o0b711wcw0/Nokia_1_TA-1047_MT6735_V8.1.0_180401.zip
Stock Rom for 1047
Download it.
Extract boot.img from that
boot into download mode/recovery
adb reboot recovery
answers to all your questions.... not the answer to fix your problem I think... But have a go.
And last but not least... Please use the search option first or google instead of asking all questions at once.
Or try to get familiar with rooting first...…
good luck buddy.
Click to expand...
Click to collapse
hi, i needed to know if this is the real one, they show it's mt6735 instead mt6737m, I've already downloaded a file with the similar name nd it has scatter file of mt6735, that's while in the sp flash tool,i don't see all of the partitions being detected to flash
Hey i am facing the same issue but i didn't flash any other recovery mode my phone Nokia 1 TA-1056 am getting black screen and only feel the vibration when i press power key and when i put my phone on charging then its shows the display and boot into recovery mode directly can anyone help me how i can overcome this issue
Here is my problem,
I have a BLN-L29, now:
running on Lineage OS Beta 4
unlocked bootloader
TWRP
Now my mission is to revert back to stock EMUI Firmware.
Apparently, many of you guys refer to this thread and this thread for solution.
However, i still cant understand the steps. Especially this:
Download Update ZIP
A. Get ROM update link through hwmt.ru. Click "filelist.xml".
B. Observe "update.zip" size, choose more than 1GB file size FULL OTA from previous step. Example ALP-L29 8.0.0.115 (C636) filelist Link, all three update files and path are in the filelist.xml content.
update.zip: Change URL last "filelist.xml" to "update.zip" download file.
update_data_public.zip: Change URL last "filelist.xml" to "public/update_data_public.zip" download file, and rename it to "update_data_public.zip"
update_all_hw.zip: Change URL last "filelist.xml" to "ALP-L29_hw_spcseas/update_ALP-L29_hw_spcseas.zip" download file, and rename it to "update_all_hw.zip"
I have downloaded three zip for BLA-L29C636b139 (8.0.0.139) that contains:
update.zip
BLA-L29_hw-spcseas/update_full_BLA0L29_hw_spcseas.zip
public/ update_data_full_public.zip
I hope there are the correct one needed to restore my phone back to stock.
Can anyone guide me please?
Hi, I was at LineageOS too.
I didn't need TWRP flash to install it.
I returned to Stock without problems, so my advice is to follow the next steps, but remember, it is you who decides to do it, I only offer you a solution that should NOT make things worse.
1. Stock recovery flashes from the version you were before Lineage, NONE other recovery version.
2. You go into recovery and do a Wipe Cache, and then a Factory Reset.
3. You restart Fastboot, and Syste.img flashes the version before Lineage.
4 Restart in recovery, and Reset Factory again, restart, and you're good to go.
To find the recovery and the Systen.img you should download the version that had your phone, download it, the full version, no other, unzip it, and with Huawei update Extractor, you get those two files that I told you.
I repeat, this should work if or if I'm not responsible for anything.
And above all, make sure first that you have the OEM Unlock, and the Bootloader open
Good luck
Translated with www.DeepL.com/Translator
Enviado desde mi BLA-L29 mediante Tapatalk
rey_lagarto said:
Hi, I was at LineageOS too.
I didn't need TWRP flash to install it.
I returned to Stock without problems, so my advice is to follow the next steps, but remember, it is you who decides to do it, I only offer you a solution that should NOT make things worse.
1. Stock recovery flashes from the version you were before Lineage, NONE other recovery version.
2. You go into recovery and do a Wipe Cache, and then a Factory Reset.
3. You restart Fastboot, and Syste.img flashes the version before Lineage.
4 Restart in recovery, and Reset Factory again, restart, and you're good to go.
To find the recovery and the Systen.img you should download the version that had your phone, download it, the full version, no other, unzip it, and with Huawei update Extractor, you get those two files that I told you.
I repeat, this should work if or if I'm not responsible for anything.
And above all, make sure first that you have the OEM Unlock, and the Bootloader open
Good luck
Translated with www.DeepL.com/Translator
Enviado desde mi BLA-L29 mediante Tapatalk
Click to expand...
Click to collapse
Thank you for your reply,
This is what i do:
downloaded a FULLOTA update for my phone
extracted system.img and recovery.img from UPDATE.APP using huawei update extractor
flash recovery using this command fastboot flash recovery_ramdisk recovery.img
factory reset
flash system.img using this comman fastboot flash system system.img
factory reset (lowlevel)
now it bootlooping
babadaba said:
Thank you for your reply,
This is what i do:
downloaded a FULLOTA update for my phone
extracted system.img and recovery.img from UPDATE.APP using huawei update extractor
flash recovery using this command fastboot flash recovery_ramdisk recovery.img
factory reset
flash system.img using this comman fastboot flash system system.img
factory reset (lowlevel)
now it bootlooping
Click to expand...
Click to collapse
latest update,
after the phone stuck at bootlooping,
i "fastboot flash system" the old lineage OS system img
now my phone is still in custom ROM.
back to square 1.
babadaba said:
Thank you for your reply,
This is what i do:
downloaded a FULLOTA update for my phone
extracted system.img and recovery.img from UPDATE.APP using huawei update extractor
flash recovery using this command fastboot flash recovery_ramdisk recovery.img
factory reset
flash system.img using this comman fastboot flash system system.img
factory reset (lowlevel)
now it bootlooping
Click to expand...
Click to collapse
If, your phone logs into bootloop, logs back into recovery, an option should appear to download the latest version available to you, it installs itself.
Anyway, if you have a bootloop problem, the terminal takes you to that step by itself, that's what happened to me when I installed Xposed Framework.
In any case, the first step should have been to do a Factory reset. I hope you can work it out.
Translated with www.DeepL.com/Translator
Enviado desde mi BLA-L29 mediante Tapatalk
---------- Post added at 10:41 AM ---------- Previous post was at 10:34 AM ----------
babadaba said:
latest update,
after the phone stuck at bootlooping,
i "fastboot flash system" the old lineage OS system img
now my phone is still in custom ROM.
back to square 1.
Click to expand...
Click to collapse
Okay, I didn't read that last one. You're back at TWRP? I hope not.
You should check to see if you have any objections to entering Recovery Stock. In case of no problems, you can try a Factory Reset again, and Wipe Cache, then just flash System.img, and again Factory Reset.
Those, and NOT others, are the steps I took, and I had no problems.
Perhaps as it is a different process from your move to Custom, it must also be different to return to Stock.
Translated with www.DeepL.com/Translator
Enviado desde mi BLA-L29 mediante Tapatalk
Hey, have you made any progress?
Greetings.
Enviado desde mi BLA-L29 mediante Tapatalk
Hello,
i was on EMUI 9 with my BKL-L09 and decided to give the custom roms a new try.
So i backed up my recovery_ramdisk (it was rooted with magisk before) and then flashed twrp (version 3.2.3-3).
Now i went for Wipe>format data and gave it a try. Result: it was hanging after makefs->(..) done. So i done the whole procedure again but it was still hanging.
Now i can't get back into twrp, because only the twrp bootscreen is showing up. Even after restoring my recovery_ramdisk backup with fastboot i can't get back into erecovery Is there anything i can do?
Thanks.
Ok, i solved this by myself through downloading the full ota update, extracting everything and flashing new kernel, system and recovery from ota update contents.
Can you put the CMD lines to do it?
Thank you anyway. I think i have the same problem.
jesusdoar said:
Can you put the CMD lines to do it?
Thank you anyway. I think i have the same problem.
Click to expand...
Click to collapse
I don't have this smartphone anymore but i remember the following:
1. Download the Full OTA Zip (e.g. here: https://www.getdroidtips.com/huawei...-update-for-honor-view-10-download-available/
2. Use the Huawei Update Extractor to extract the partitions from the content in the zip file. (https://forum.xda-developers.com/showthread.php?t=2433454)
3. Flash the partitions over the existing ones on your V10 using fastboot "fastboot flash recovery_ramdisk recovery_ramdisk.img , ...) - these contents are inside the full ota package
Greetings
Did it work out for you?
You can also try to flash the original erecovery using fastboot und use the download option inside the Recovery App. This will reset all partitions back to default. But also all data is lost.
Brodelpiet said:
Did it work out for you?
You can also try to flash the original erecovery using fastboot und use the download option inside the Recovery App. This will reset all partitions back to default. But also all data is lost.
Click to expand...
Click to collapse
it works thank you, now the problem is that the erecovery doesn´t download the package to flash.
jesusdoar said:
it works thank you, now the problem is that the erecovery doesn´t download the package to flash.
Click to expand...
Click to collapse
Did you just flash the erecovery or also the normal recovery partition und Kernel from the zip? What kind of error do you get?
Brodelpiet said:
Did you just flash the erecovery or also the normal recovery partition und Kernel from the zip? What kind of error do you get?
Click to expand...
Click to collapse
Yeah i flashed the kernel and the recovery ramdisk. And now it boots into erecovery, but inside the erecovery, the option to download and install the last version of emui doesn´t work, it just shows an error that it can´t get the package info.
thanks for your attention.
greets
Hey guys,
I've tried to update my Nord 2 to the newest software (A.12) but every time I try it, it just reboots after a couple seconds and displays an error message:"Verification error". I've tried rebooting it multiple times, without any success. It is rooted with magisk and the bootloader is open, but I don't have TWRP installed. Could you guys hook me up with a solution?
Regards
Take a look: https://forum.xda-developers.com/t/...rooted-nord-2-any-incremental-update.4347813/
Thanks for your reply, I really appreciate it! I've looked at it, but I haven't found a specific update from a.11 to a.12, I just didn't want to take the risk to update with the indian variant from a.11 to a.13.
AdamBarath said:
Thanks for your reply, I really appreciate it! I've looked at it, but I haven't found a specific update from a.11 to a.12, I just didn't want to take the risk to update with the indian variant from a.11 to a.13.
Click to expand...
Click to collapse
No need to download the update file from third parties. If you downloaded it from settings, you can find it in your internal storage at android/data/com.oneplus.ota/files
For the boot file instead, you can find boot files both for indian and Eu in that post
Raygen said:
No need to download the update file from third parties. If you downloaded it from settings, you can find it in your internal storage at android/data/com.oneplus.ota/files
For the boot file instead, you can find boot files both for indian and Eu in that post
Click to expand...
Click to collapse
Thank you, I really appreciate your help! I'm going to try it as soon as possible, do I have to flash the vbmeta.img, if I use my own update.zip file? (Sorry, I have literally zero knowledge)
AdamBarath said:
Thank you, I really appreciate your help! I'm going to try it as soon as possible, do I have to flash the vbmeta.img, if I use my own update.zip file? (Sorry, I have literally zero knowledge)
Click to expand...
Click to collapse
Yup, the order is:
Backup EVERYTHING.
Flash stock boot image for your current version (A.11)
Flash update.zip via recovery
Flash patched vbmeta via fstboot
Re flash TWRP via fastboot
Reflash magisk:
Flash the .zip it via recovery (not reccomended). OR,
Download and flash an already patched boot image for the updated version (A.12). OR,
Extract your stock updated boot image (A.12) with adb shell and dd (or download it), boot into system, patch the image with the magisk app, flash the patched boot image in recovery.
If during one of these steps you get back the stock recovery, just boot into fastboot and reflash twrp. Without magisk installed the rom tends to restore the stock recovery by itself.
Thank you for your help!
Worked like a charm!
Hello all,
It's a long time that's i haven't post a thread here but i have a question.I have a Poco with MIUI Global 9.6 Stable (9.6.25.0) for ROM with a Android Version 8.1.0 OPM 171019.011 with root acces, unlocking bootloader and TWRP 3.3.0-0 installed.
I would upgrade my phone to something "newer" (A ROM with Android 12 if possible) and conserv the root access and my apps.
I have read that now ,we should have 3 files to do that (firmware,system and vendor) to make a wipe and install new ROM with TWRP.
So my question:
-Is it possible to upgrade Android 8.1.0 to Android 12 witn a new ROM? (i have read something about kernel in Android12 but haven't understand all)
-Have i missed some steps or just download files,boot TWRP,wipe and install newer ROM+firmware and vendor appropriate is good?
-Which ROM do you recommend?
Thanks for the previous answers.
devil1 said:
Hello all,
It's a long time that's i haven't post a thread here but i have a question.I have a Poco with MIUI Global 9.6 Stable (9.6.25.0) for ROM with a Android Version 8.1.0 OPM 171019.011 with root acces, unlocking bootloader and TWRP 3.3.0-0 installed.
I would upgrade my phone to something "newer" (A ROM with Android 12 if possible) and conserv the root access and my apps.
I have read that now ,we should have 3 files to do that (firmware,system and vendor) to make a wipe and install new ROM with TWRP.
So my question:
-Is it possible to upgrade Android 8.1.0 to Android 12 witn a new ROM? (i have read something about kernel in Android12 but haven't understand all)
-Have i missed some steps or just download files,boot TWRP,wipe and install newer ROM+firmware and vendor appropriate is good?
-Which ROM do you recommend?
Thanks for the previous answers.
Click to expand...
Click to collapse
It's not possible to switch from stock ROM to custom without doing clean install. You will have to root again.
First update to latest Official Stock ROM, then take backup of your files to your PC or to SDCard (if you have one) , flash to latest Official TWRP and check my POCO F1 Ultimate Collection & Guides. You can find everything there. I have awarded recommended ROMs in my collection.
Feel free to ask if you have any question regarding the guides.
Thanks for the answer.I have begin to read your guides.
If i understand good,it's not possible to conserv my root,unlock bootloader and twrp when i upgrade to android 12? Automaticaly i should root again my phone and restore with titanium backup my files,contact,....?
devil1 said:
Thanks for the answer.I have begin to read your guides.
If i understand good,it's not possible to conserv my root,unlock bootloader and twrp when i upgrade to android 12? Automaticaly i should root again my phone and restore with titanium backup my files,contact,....?
Click to expand...
Click to collapse
First you need to take backup of your files to PC or External SDCard.
Then you should update to latest version of MIUI via OTA if it's possible or via TWRP (you can use the stock recovery rom to do it via twrp). (You can also use my guides for clean install stock rom)
Then you should unlock your bootloader if it's not already unlocked.
Then flash latest Official TWRP.
Then flash latest firmware (not vendor) just to make sure you are on the latest. (You should be on latest firmware after updating to the latest MIUI version)
Then Wipe everything + format data according to my guides and flash the ROM you want. If you choose A12 Pixel Experience or crDroid keep in mind that these ROMs use their own recovery because these are encrypted by default ROMs and TWRP can't handle the decryption of A12 encrypted ROMs yet. So to make OTA updates and that stuff work correctly devs of these ROMs decide to use their own recovery which can handle the decryption of encrypted roms and as result to make OTA update work fine. Check the installation instructions of these roms in their threads. (Afterwards you can use adb sideload to flash stuff using these recoveries)
After that, flash Magisk since you want root.
Then you can restore titanium backup if you want.
OK i follow your instruction.Thanks
Hello retrial,
I have now updating my phone to MIUI Global 12.0.3 Stable with Android Version 10QKQ1.My phone is not yet rooted and now he is encrypted.The recovery is now Mi-Recovery 3.0
I have unlock again my bootloader.
Now to follow your instruction,i should flash the latest TWRP.
I have take TWRP-3.6.0_9-0-berylium in your guide.
I think i should do Fastboot Method because i'm now in Mi-Recovery?i'm right?
No problem with the encryption?
Thanks.
i have find this video.This is not the good phone but i think that the installation is the same:
devil1 said:
Hello retrial,
I have now updating my phone to MIUI Global 12.0.3 Stable with Android Version 10QKQ1.My phone is not yet rooted and now he is encrypted.The recovery is now Mi-Recovery 3.0
I have unlock again my bootloader.
Now to follow your instruction,i should flash the latest TWRP.
I have take TWRP-3.6.0_9-0-berylium in your guide.
I think i should do Fastboot Method because i'm now in Mi-Recovery?i'm right?
No problem with the encryption?
Thanks.
Click to expand...
Click to collapse
Yes use Fastboot Method to flash TWRP. No problem with encryption.
After that follow my clean install custom rom guide to flash the ROM you want. Also please check the instructions in the threads of ROMs you want to flash. A12 crDroid and PE use their own recoveries.
Basically tell me which ROM you want to flash to help you exactly with steps.
Hello retrial,
i have a problem to install TWRP-3.6.0-9-0 on my pocophone.Everything working fine but in step 8 of your guide,i can't find my twrp.img that i have copied in 2 different case to test :
8. Boot into Recovery by typing in cmd: fastboot boot <recovery_filename>.img (The file may not be named identically to what stands in this command, so adjust accordingly and write the full path of it, check the example below).
This command will not flash permantly the recovery, it will just temporary boot into it and afterwards you will flash permantly the twrp.img you copied into your Internal Storage or SDcard in recovery partition.
For example: fastboot boot C:\Users\Retrial\Desktop\twrp-3.5.2_9-0-beryllium.img
Have you an idea to why i cannot find my twrp.img in the boot mode?
devil1 said:
Hello retrial,
i have a problem to install TWRP-3.6.0-9-0 on my pocophone.Everything working fine but in step 8 of your guide,i can't find my twrp.img that i have copied in 2 different case to test :
8. Boot into Recovery by typing in cmd: fastboot boot <recovery_filename>.img (The file may not be named identically to what stands in this command, so adjust accordingly and write the full path of it, check the example below).
This command will not flash permantly the recovery, it will just temporary boot into it and afterwards you will flash permantly the twrp.img you copied into your Internal Storage or SDcard in recovery partition.
For example: fastboot boot C:\Users\Retrial\Desktop\twrp-3.5.2_9-0-beryllium.img
Have you an idea to why i cannot find my twrp.img in the boot mode?
Click to expand...
Click to collapse
Send a screenshot what you type in cmd and where you have the twrp.img
Or you mean you can't find it in your device while you are booted on TWRP?
i cannot find the twrp.img in my device.The step 8 of your tutorial.
I have copied the files but cannot find it in the cases.I have take TWRP-3.6.0-9-0
The link of the files: https://eu.dl.twrp.me/beryllium/twrp-3.6.0_9-0-beryllium.img.html
devil1 said:
i cannot find the twrp.img in my device.The step 8 of your tutorial.
I have copied the files but cannot find it in the cases.I have take TWRP-3.6.0-9-0
The link of the files: https://eu.dl.twrp.me/beryllium/twrp-3.6.0_9-0-beryllium.img.html
Click to expand...
Click to collapse
Are you sure you select Install Image?
ok i have download an other twrp.img and this time it's ok.i can go to the end of the tutorial but when i reboot my device mi-recovery 3.0 come back.I have tried 2 times but all the time mi-recovery3.0 come back
Have you an idea?
Should i take a additional command like in the video i have send you in the thread "fastboot flash recovery"?
devil1 said:
ok i have download an other twrp.img and this time it's ok.i can go to the end of the tutorial but when i reboot my device mi-recovery 3.0 come back.I have tried 2 times but all the time mi-recovery3.0 come back
Have you an idea?
Should i take a additional command like in the video i have send you in the thread "fastboot flash recovery"?
View attachment 5549731
Click to expand...
Click to collapse
I have all the steps on my guide. Please read it carefully. It boots back to mi recovery because you haven't flash TWRP yet just booted into. After boot into TWRP u need to flash twrp in recovery section so it will stay after reboot.
Please read the steps.
Download portable Minimal ADB and Fastboot and latest Official TWRP recovery.
Open cmd from minimal adb and fastboot and write:
fastboot boot and the path you have TWRP.
Example:
Code:
fastboot boot C:\Users\Retrial\Desktop\twrp-3.6.0_9-0-beryllium.img
Then proceed with the rest steps in my guide. Connect ur device to pc while u are booted into TWRP and copy TWRP.img to your device. Then in TWRP press Install Image and select the twrp.img u just copied into ur device. Select recovery and done.
I have made a video to show you what happened (sorry for the bad quality and the moove) :
I think a video is easyest to understand my problem.For information my bootloader is unlock and usb debugging ok.
devil1 said:
I have made a video to show you what happened (sorry for the bad quality and the moove) :
I think a video is easyest to understand my problem.For information my bootloader is unlock and usb debugging ok.
Click to expand...
Click to collapse
Hmm strange, probably of MIUI. Anyway since you are going to flash custom rom, when u flash twrp in recovery go back and select wipe and wipe everything (read my clean install guide), go back press format data type yes, and then reboot to TWRP.
EDIT: I just saw u rebooted to system. That's not what we want. Press reboot to recovery.
i reboot first to bootloader after have flash the twrp.img in recovery.That's only the second time that i reboot to system to use the normal mode of the phone and reboot after to recovery mode to show you that mi recovery is back.
devil1 said:
i reboot first to bootloader after have flash the twrp.img in recovery.That's only the second time that i reboot to system to use the normal mode of the phone and reboot after to recovery mode to show you that mi recovery is back.
Click to expand...
Click to collapse
The TWRP flashed correctly. You overlap it again by pressing reboot to recovery from MIUI updater.
Don't do that...do the combination to boot to TWRP after flashing it. Power+Volume Up.
And continue with clean install steps in my guide to flash custom rom.
In my guide I write nowhere to boot to MIUI and press from MIUI Updater reboot to recovery, please stick to my guide and you will be fine.
Poco f1 update not