Related
Hi guys,
I just left the Apple for the droid world (Honor 9 C432). I used to change my phone rom using cutom rom int the past (far far away...) like 8 years ago on an HTC...
But now on my honor 9 i'm a bit lost on the steps i have to follow to put custom rom.
My needs is to leave EMUI to an official android rom (oreo) or lighter (maybe RROS or lineage).
Is there a full guide that explains step by step the proceed to change the stock rom to a custom one ?
As always, thanks for help.
Aqwel.
Aqwel said:
Hi guys,
I just left the Apple for the droid world (Honor 9 C432). I used to change my phone rom using cutom rom int the past (far far away...) like 8 years ago on an HTC...
But now on my honor 9 i'm a bit lost on the steps i have to follow to put custom rom.
My needs is to leave EMUI to an official android rom (oreo) or lighter (maybe RROS or lineage).
Is there a full guide that explains step by step the proceed to change the stock rom to a custom one ?
As always, thanks for help.
Aqwel.
Click to expand...
Click to collapse
Hello .
Are you blind? All u need is in this section and XDA forum Honor or Huawei
https://forum.xda-developers.com/honor-9/development
nico97470 said:
Hello .
Are you blind? All u need is in this section and XDA forum Honor or Huawei
https://forum.xda-developers.com/honor-9/development
Click to expand...
Click to collapse
Well i just come back from my ophthalmologist and it seems that my eyes are ok.
If i ask it's because i don't understand the steps order, sometimes i see i have to backup before doing unlock bootloader and to backup i need to install TWRP but to install TWRP i need to unlock...
In the past i used to have full guide like for example :
To custom you need :
A memory SD card at least X GB
A PC with Windows or OSx or whatever
Those softwares (dl link)
1/ Unlock mobile blablabla
2/ install this softwares
3/....
Thanks for helping.
Try asking in the ROM specific threads. The existing guides are what they are.
Usually, you need som sort of basic phone modification know-how before you take on XDA forums.
fregor said:
Try asking in the ROM specific threads. The existing guides are what they are.
Usually, you need som sort of basic phone modification know-how before you take on XDA forums.
Click to expand...
Click to collapse
Ok thank you fregor, i search on the net for tutorial i have find some to learn basics but they were wrotte 6 months ago and some deals with EMUI 5.
Does they still valid for EMUI 8. ?
Thanks
I would say : yes on the main lines, not in the details. the name of the image ( system , boot, recovery..... ) is not the same, for example.
Aqwel said:
Ok thank you fregor, i search on the net for tutorial i have find some to learn basics but they were wrotte 6 months ago and some deals with EMUI 5.
Does they still valid for EMUI 8. ?
Thanks
Click to expand...
Click to collapse
If you're going to change rom, go for Oreo...
I suggest you begin with OldDroid's thread on how to install Oreo (it's in this section as well) to update to EMUI 8.
Then, if you want to really leave stock, after you're on EMUI 8 it's as easy as downloading a file and using a fastboot command on your computer. You have RR (Android 8.1) or AOSP (Android 8.0), both threads are in the development section.
One very important thing, not only you have to unlock your bootloader (which takes you a couple of minutes) but you have to unlock FRP (translation - Go to Developer Settings and toggle Allow OEM Unlock)
I suggest you do this first, then setup a Huawei account and go to the official website to unlock your H9, fill up the required info and you will have the code and the extremely noob-friendly instructions on how do the thing.
After restarting it again install all setup , when restore setup come , it's restart again and again,
This problem comes after restart REDMI NOTE3
AFTER FACING ALL PROBLEM I DONE RESTORE FACTORY RESET AND AGAIN REINSTALL THEN IT WORKS BUT AFTER RESTARTING I FACING ABOVE PROBLEM AGAIN
Please give me solution
1 st your posting in development thread which is not the right place for your query.
2nd Which device have you this is for Mediatek devices and there is not a Pie rom for them.
3rd Look at PE Thread and you would see it is a problem with the rom, flashing the VoLTE patch fixes it. Or wait for rom update.
Oh dear - you've done goofed up - Hennessey-based devices (Xiaomi Redmi Note 3 - MediaTek Edition) doesn't get anywhere near as much development as the Kenzo-Kate devices (Xiaomi Redmi Note 3 - Qualcomm Snapdragon 2GB/3GB RAM Editions), and Android Pie isn't even developed for the MediaTek version of the phone.
DS Kushwaha said:
Please give me solution
Click to expand...
Click to collapse
Don't go around asking for stuff, we don't get paid for this, you caused a problem, you're the one who needs to fix it, no one has any obligation to help.
That said, if you had read the thread instead of just downloading the ROM you'd have noticed tons of people with the same problem and all have been given the same solution, flash the VoLTE fix.
Also, you posted on the wrong forum, this one is for mediatek based devices.
Guys, don't mind to reply OP. This man doesn't know how to read properly
Sent from my TA-1004 using Tapatalk
Read this
https://forum.xda-developers.com/redmi-note-3/how-to/hello-t3859355
No you don't install Pixel Experience 9.0. It isn't available for this device (henessy).
If you have kenzo or kate, then you want the Xiaomi Redmi Note 3 [Snapdragon] forum.
Post this was a reply to, got deleted.
Hi,
Just for say, to be flash your phone carefully ! I flash today a rom (test) and phone go to BL ( Poco logo) and after try to enter fastboot/recovery, phone wont boot ( Black Screen) without any reason
Now it goes back to the shop for repair ( edl certainly )
So be careful for now
For a phone with level3 api for cameras and a (supposedly) released kernel source at launch they really seem not to be wanting us to modify the phone.
billouetaudrey said:
Hi,
Just for say, to be flash your phone carefully ! I flash today a rom (test) and phone go to BL ( Poco logo) and after try to enter fastboot/recovery, phone wont boot
So be careful for now
Click to expand...
Click to collapse
What did you flash? I'm thinking of flashing AOSP GSI or other modifications
Slim K said:
What did you flash? I'm thinking of flashing AOSP GSI or other modifications
Click to expand...
Click to collapse
What I do :
Flash rom (Pixel plus), flash boot.img(Miui boot) and format data, reboot
It's reboot to BL ( poco logo ) and stuck to BL, So I force to reboot on fastboot and never boot ( black screen )
billouetaudrey said:
What I do :
Flash rom (Pixel plus), flash boot.img(Miui boot) and format data, reboot
It's reboot to BL ( poco logo ) and stuck to BL, So I force to reboot on fastboot and never boot ( black screen )
Click to expand...
Click to collapse
where u get pixel plus ?
as of today there's no development on this rom for poco x3
believe u choose the wrong rom
aariss said:
where u get pixel plus ?
as of today there's no development on this rom for poco x3
believe u choose the wrong rom
Click to expand...
Click to collapse
I'm tester, it's under dev
billouetaudrey said:
I'm tester, it's under dev
Click to expand...
Click to collapse
No wonder
btw, which twrp are u using ?
Also in fastboot mode, why dont u use miflash to flash stock rom back ?
billouetaudrey said:
I'm tester, it's under dev
Click to expand...
Click to collapse
Did the dev had a similar problem? Are you the only tester of it?
aariss said:
No wonder
btw, which twrp are u using ?
Also in fastboot mode, why dont u use miflash to flash stock rom back ?
Click to expand...
Click to collapse
I don't have fastboot access too, no led when charging, nothing...
Maybe it's Hardware issue... The fact is I see the poco logo ( Bootloader) after reboot Recovery
So I force to reboot to Fastboot and black screen
_Raziel666 said:
Did the dev had a similar problem? Are you the only tester of it?
Click to expand...
Click to collapse
Only me test it
How to fix
So scary to flash rom on poco x3. Can it not be save by flashing rom thru miui flash tool?
MOD EDIT: QUOTE REMOVED
You have no idea what are you talking about, so.....read before being rude with people who wanna get some help or warn us to not do what they did. No disabling AVB is necessary when TWRP for Poco X3 is used for flashing stock or custom ROMs. Format data is needed in some scenarios. The only thing you NEVER wanna do is downgrading to an earlier Android version ROM (from Android 10 to 9, 11 to 10 and so on). So, chill out and keep reading
I bricked My note 9 pro after flashing and cant get it to connect with edl mode .. its only blinkning bootlogo and reastart itself .. now i have buy poco x3 i never gonna flash My new phone
Alin45 said:
You have no idea what are you talking about, so.....read before being rude with people who wanna get some help or warn us to not do what they did. No disabling AVB is necessary when TWRP for Poco X3 is used for flashing stock or custom ROMs. Format data is needed in some scenarios. The only thing you NEVER wanna do is downgrading to an earlier Android version ROM (from Android 10 to 9, 11 to 10 and so on). So, chill out and keep reading
Click to expand...
Click to collapse
Is there a post that states what you must not do, or must do when flashing ? Would appreciate it - previous phone was Redmi Note 3 and I could flash whatever i wanted willy nilly. Would not like to brick my new phone.
For example: ROMs for the Poco X3 mosly have the 12.0.2 firmware requirement, but i updated it to 12.0.3 already. Would i brick my phone if i flashed the custom rom anyway, or if i flashed the older 12.0.2 over 12.0.3 ?
Yoda007 said:
Is there a post that states what you must not do, or must do when flashing ? Would appreciate it - previous phone was Redmi Note 3 and I could flash whatever i wanted willy nilly. Would not like to brick my new phone.
For example: ROMs for the Poco X3 mosly have the 12.0.2 firmware requirement, but i updated it to 12.0.3 already. Would i brick my phone if i flashed the custom rom anyway, or if i flashed the older 12.0.2 over 12.0.3 ?
Click to expand...
Click to collapse
Downgrading brick: https://www.xda-developers.com/xiaomi-anti-rollback-protection-brick-phone/
Seems it's safe to use MiFlash because it will not let you downgrade, but when you use TWRP it helps to read this article.
In other cases, just read carefully and follow step by step the instructions offered by the developers for their ROMs.
I'm not an expert, btw. I just read a lot lol
MOD EDIT: QUOTE REMOVED
"flashing anything in an unlocked bootloader, requires from user to disable AVB (or flash a null vbmeta.img) before you boot any flashed rom ... otherwise = brick !" - WRONG in the case of Poco X3!!! The downgrading part was like a general warning, not for Poco X3 specific (even it's true for Android 11 to 10 downgrade). Seems you can read, but to understand what you read is a problem you have. I can't help you with that, sorry
Thread cleaned
Please keep discussion on topic, without name calling and civilized like humans. We're all here to discuss about phones
I recommend to read the FORUM RULES especially those:
2.1 Language: XDA is a worldwide community. As a result, what may be OK to say in your part of the world, may not be OK elsewhere. Please don't direct profanity, sexually explicit language or other offensive content toward Members or their work. Conversely, while reading posts from other members, remember that the word you find offensive may not be offensive to the writer. Tolerance is a two-way street.
2.3 Flaming / Lack of respect: XDA is about sharing and this does not involve virtual yelling (flaming) or rudeness. Flaming or posting with a lack of respect is unacceptable. Treat new members in the manner in which you would like to have been treated when you were a new member. When dealing with any member, provide them with guidance, advice and instructions when you can, showing them respect and courtesy. Never post in a demanding, argumentative, disrespectful or self-righteous manner.
2.4 Personal attacks, racial, political and / or religious discussions: XDA is a discussion forum about certain mobile phones. Mobile phones are not racial, political, religious or personally offensive and therefore, none of these types of discussions are permitted on XDA.
If you come across this just hit the report button and let the mods handle it, do not respond or become part of such a discussion:good:
Regards!
strongst
Forum Moderator
The reasons Xiaomi phones get bricked when rolling back to an earlier version is because of the "Rollback Protection". Xiaomi implemented this, not to prevent modding, but to prevent resellers from flashing global versions of ROMs (which include google apps) to newely released Chinese models not available outside China. They bought phones in bulk, flashed global ROMs and sold phones as if they were running official software. So never downgrade to ROMs based on older firmware sources than the one you have on your phone!
I think poco x3 has NOT ARB.
correct me if am i wrong please
First of all, I'm really sorry if this thread would turn out to be a dumb enquiry. I am new to intrinsically customising my phone and only have been using this device (Redmi Note 9S EEA Curtana, MIUI Global V11.0.4.0. QJWEUXM 4/64 GB) for 10 days. I've successfully installed root and TWRP on my phone after having thoroughly researched relevant information. The only thing is all my efforts regarding the removal of force encryption have so far failed. I'm inclined to install a custom ROM, e. g. LineageOs or Evolution X.
1. Is it a necessity to have encryption permanently disabled so that the flashing process proves viable? Currently, I'm only aware of a method which has its effect limited to the the period the phone is in recovery. It involves formatting data and then installing Magisk and thus I need to go through the set-up again. At the end of the operation, encryption is enabled again. I have no clue why. I've tested loads of no verity opt files, none of them worked in a proper way either.
2.Will installing a custom ROM eliminate root acces (since it performs a reinstallation targeting the entire system, let alone the patched boot image)?
3. In case something goes wrong, what's the correct procedure to return to the factory ROM? Is re-locking the bootloader a prerequisite? (See this guide https://c.mi.com/uk/miuidownload/detail?guide=2, for example. Notice how each of the stable MIUI releases there are marked with ★ next to them, meaning they're locked. I didn't quite grasp the message they were trying to convey with that explanation though.)
I'm conscious that's a lot to ask in a single thread, however, unlike myself, the majority of users here are supposedly tech enthusiast and probably have encountered similar difficulties on several occasions.
I hope that I've provided enough information and the thread has been named reasonably.
(Priority: detailed answers within a month would be great.)
Cheers,
Hsjaai
Just format data: twrp->wipe->format data write yes->reboot twrp and flash rom.
If you got error(red lignes reboot twrp and format again).
or
delete all your lockscreen security before flashing but to install a new rom you must format the data before.
Thanks for your quick response, honestly I didn't expect anyone to be this early to react.
As I've already mentioned, in TWRP there's a workaround for temporarily disabling encryption using the first method, the latter one doesn't seem to function as intended - that may be the case on newer devices, according to an article I've come across.
One last request. Could you please (briefly) answer my two other questions as well? How do I reinstall MIUI if something breaks down? Is the flashing apparatus provided by Xiaomi reliable?
I'll keep you updated on my progress,
Hsjaai
Hsjaai said:
Thanks for your quick response, honestly I didn't expect anyone to be this early to react.
As I've already mentioned, in TWRP there's a workaround for temporarily disabling encryption using the first method, the latter one doesn't seem to function as intended - that may be the case on newer devices, according to an article I've come across.
One last request. Could you please (briefly) answer my two other questions as well? How do I reinstall MIUI if something breaks down? Is the flashing apparatus provided by Xiaomi reliable?
I'll keep you updated on my progress,
Hsjaai
Click to expand...
Click to collapse
Use this tool who is reliable(if you follow the instructions). In all cases unroot before and reboot (if necessary).
NOSS8 said:
Use this tool who is reliable(if you follow the instructions). In all cases unroot before and reboot (if necessary).
Click to expand...
Click to collapse
Thank you so much once again for the help. What should I do if the worst-case scenario arised -essential parts of the file system got corrupted so that the phone wouldn't be capable of booting into system? Uninstall magisk via zip and then make use of the fastboot tool?
Hsjaai said:
Thank you so much once again for the help. What should I do if the worst-case scenario arised -essential parts of the file system got corrupted so that the phone wouldn't be capable of booting into system? Uninstall magisk via zip and then make use of the fastboot tool?
Click to expand...
Click to collapse
1)Normaly yes
2)Or with app(i prefer)
NOSS8 said:
2)Or with app(i prefer)
Click to expand...
Click to collapse
What did you mean by that exactly?
Besides, sorry for bothering you, it's just that I'm genuinely curious and don't want to mess up the process.
Hsjaai said:
What did you mean by that exactly?
Besides, sorry for bothering you, it's just that I'm genuinely curious and don't want to mess up the process.
Click to expand...
Click to collapse
With Magisk app
I'm still unsure about something. Will the custom ROM be installed without hassle if I unroot Magisk at the beginning (meanwhile leaving the custom recovery intact, of course)? No guide seems to deem having root installed as a prerequisite. If you answer that, I'm really embarking on the flashing process.
Hsjaai said:
I'm still unsure about something. Will the custom ROM be installed without hassle if I unroot Magisk at the beginning (meanwhile leaving the custom recovery intact, of course)? No guide seems to deem having root installed as a prerequisite. If you answer that, I'm really embarking on the flashing process.
Click to expand...
Click to collapse
Installing a custom rom (aosp or Miui) requires a data format (erases all data and creates a new partitions if necessary) which will remove root anyway, but sometimes root + twrp creates problems (can't mout the partitions) it is therefore to avoid this that I recommend you to unroot before.
In all cases (Aosp or custom Miui) magisk is installed last.
Which ROM do you want to install?
I'd like to install LineageOS first and see how compatible it is.
[ROM][UNOFFICIAL] LineageOS 17.1 for Redmi Note 9S
THERE IS AN OFFICIAL BUILD NOW, USE THAT INSTEAD! Note: this ROM is derived from LeddaZ's build. I will continue to update it until my 9s is on its last legs. Do not expect any features to be added. LineageOS is a free, community built...
forum.xda-developers.com
LineageOS With Android 11 For Redmi Note 9s/9 Pro/9 Pro Max/Poco M2 Pro (Miatoll) | The Custom Rom
November 20, 2021 Lineage OS 18.1 | OFFICIAL ~ Miatoll Android: 11 Build Date: 19.11.2021 Maintainer: @dereference
thecustomrom.com
The latter is relatively new, although I doubt that site would be credible.
Hsjaai said:
I'd like to install LineageOS first and see how compatible it is.
[ROM][UNOFFICIAL] LineageOS 17.1 for Redmi Note 9S
THERE IS AN OFFICIAL BUILD NOW, USE THAT INSTEAD! Note: this ROM is derived from LeddaZ's build. I will continue to update it until my 9s is on its last legs. Do not expect any features to be added. LineageOS is a free, community built...
forum.xda-developers.com
LineageOS With Android 11 For Redmi Note 9s/9 Pro/9 Pro Max/Poco M2 Pro (Miatoll) | The Custom Rom
November 20, 2021 Lineage OS 18.1 | OFFICIAL ~ Miatoll Android: 11 Build Date: 19.11.2021 Maintainer: @dereference
thecustomrom.com
The latter is relatively new, although I doubt that site would be credible.
Click to expand...
Click to collapse
Umm... I've taken my word back, they're XDA developers, not just some random dudes in the internet. Still, you can't be too careful.
Deleted
Hsjaai said:
Umm... I've taken my word back, they're XDA developers, not just some random dudes in the internet. Still, you can't be too careful.
Click to expand...
Click to collapse
Lineage 17 for Curtana
Lineage 18 for Miatoll
CherishOS https://sourceforge.net/projects/cherish-os/files/device/curtana/
More options than lineage.
NOSS8 said:
Lineage 17 for Curtana
Lineage 18 for Miatoll
CherishOS https://sourceforge.net/projects/cherish-os/files/device/curtana/
More options than lineage.
Click to expand...
Click to collapse
What device is Miatoll ?
Hello guys ! For some days or weeks, I see a new codename : Miatoll. I looked and search but I don't find what device is it. Can you helo me ? I wonder if I can flash my phone with a Miatoll Rom
forum.xda-developers.com
Miatoll ROMs are supposed to be compatible with Curtana if I haven't got something wrong... What's the deal with that?
I may consider flashing CherishOS instead, seems neat and the monthly updates appeal to me.
Hsjaai said:
What device is Miatoll ?
Hello guys ! For some days or weeks, I see a new codename : Miatoll. I looked and search but I don't find what device is it. Can you helo me ? I wonder if I can flash my phone with a Miatoll Rom
forum.xda-developers.com
Miatoll ROMs are supposed to be compatible with Curtana if I haven't got something wrong... What's the deal with that?
I may consider flashing CherishOS instead, seems neat and the monthly updates appeal to me.
Click to expand...
Click to collapse
Indeed it is the same.
Others great roms
https://sourceforge.net/projects/blissroms/files/R/miatoll/***
https://downloads.msmxtended.org/?dir=miatoll***
Don't flash magisk right away, check if the playstore is certified.
If not delele your google account and root with the Magisk app.
Of course, if you absolutely want to root your device for other reasons, ignore that.
***certified on redmi note 7
The installation of these should only differ (on a particular device) in the ROM that's being flashed az a zip, right?
For instance, see this guide. Could that be deemed to be applicable to any custom ROM?
https://www.getdroidtips.com/lineage-os-18-1-xiaomi-mi-a2-lite/
Hsjaai said:
The installation of these should only differ (on a particular device) in the ROM that's being flashed az a zip, right?
For instance, see this guide. Could that be deemed to be applicable to any custom ROM?
https://www.getdroidtips.com/lineage-os-18-1-xiaomi-mi-a2-lite/
Click to expand...
Click to collapse
Install the right TWRP
Be sure you have the right firmware.
If not flash it.
1)Twrp wipe format data write yes reboot twrp(if error reboot twrp and format again).
2)flash rom
3)reboot system
v11.0.4.0. QJWEUXM is a turkish rom(android 10)
V12.0.2.0.RJWMIXM is a global rom(android 11)Firmware base for AOSP
It is better to use Miflash and install TWrp after.(dont relock the bootloader).
Are you sure v11.0.4.0. QJWEUXM is the Turkish version? I thought it was EEA (the one tweaked for European countries). Installing the Global version seems alright, but why does the MIUI version has such a great effect on the outcome of the flashing?
Is that because both Cherish OS and the Global version are AOSP-based?
Hsjaai said:
Are you sure v11.0.4.0. QJWEUXM is the Turkish version? I thought it was EEA (the one tweaked for European countries). Installing the Global version seems alright, but why does the MIUI version has such a great effect on the outcome of the flashing?
Is that because both Cherish OS and the Global version are AOSP-based?
Click to expand...
Click to collapse
My bad EEA
AOSP use global firmware .RJWMIXM android 11
and sometime CN firmware.
https://xiaomifirmwareupdater.com/miui/curtana/
Hello, i've looked through many Forums and Threads but i couldn't find an answer.
The Problem: I have an OnePlus 7T Pro (Regular) (HD1910) running on OOS 11.0.6.1.HD01AA and i want to install TWRP Recovery with Magisk, but i dont have the necessary files and i maybe need a guide. The Guides i found where from 2021 and the Files i found where for OOS with Android 10. I want to stay on the Stock OS but as i said with TWRP and Magisk. Can someone help me?
PS: It's not the first time that im Rooting a Smartphone but i only have experience with Samsung and Huawei Devices.
Delorean12DMC said:
Hello, i've looked through many Forums and Threads but i couldn't find an answer.
The Problem: I have an OnePlus 7T Pro (Regular) (HD1910) running on OOS 11.0.6.1.HD01AA and i want to install TWRP Recovery with Magisk, but i dont have the necessary files and i maybe need a guide. The Guides i found where from 2021 and the Files i found where for OOS with Android 10. I want to stay on the Stock OS but as i said with TWRP and Magisk. Can someone help me?
PS: It's not the first time that im Rooting a Smartphone but i only have experience with Samsung and Huawei Devices.
Click to expand...
Click to collapse
1. Unlock phone
2. Flash TWRP(FBEv1 for oos) - https://twrp.me/oneplus/oneplus7tpro.html
3. Flash anything if you want
You want to also pass the safety net checks?
Timka-1 said:
You want to also pass the safety net checks?
Click to expand...
Click to collapse
If that is possible, yes.
Take a look at this guide. Perhaps it can help you too:
GitHub - poti1/oneplus7tpro
Contribute to poti1/oneplus7tpro development by creating an account on GitHub.
github.com