Need help, not sure what i did but i was initially trying to root my phone to recover deleted texts from it. I followed all steps from the unlockr site on how to root the moto E . Got as far as the SuperSU.zip file and the moto e cwm recovery then hit a brick wall...nothing happened. undid all the steps i could and tried using TWRP instead. This also did nothing so i attempted to refresh the phone via factory reset and now whenever i try to load up or load into recovery i get a pop up that is half cut off saying device has been unlocked and can't be trusted to learn more visit motorola site /unlockbootloader device will boot in 5 seconds. It is also saying n/a in the top left corner, i don't know what to do and i wish i wasn't such a noob at this but i figured i was following guides until I somehow managed to gloriously botch it.
Edit: can't turn phone off as it just reboots itself back to fast boot.
Ogichi117 said:
Need help, not sure what i did but i was initially trying to root my phone to recover deleted texts from it. I followed all steps from the unlockr site on how to root the moto E . Got as far as the SuperSU.zip file and the moto e cwm recovery then hit a brick wall...nothing happened. undid all the steps i could and tried using TWRP instead. This also did nothing so i attempted to refresh the phone via factory reset and now whenever i try to load up or load into recovery i get a pop up that is half cut off saying device has been unlocked and can't be trusted to learn more visit motorola site /unlockbootloader device will boot in 5 seconds. It is also saying n/a in the top left corner, i don't know what to do and i wish i wasn't such a noob at this but i figured i was following guides until I somehow managed to gloriously botch it.
Edit: can't turn phone off as it just reboots itself back to fast boot.
Click to expand...
Click to collapse
Download Moto e5 play twrp and flash via fastboot
Hey, been busy since I posted this but I resolved the problem day before last. Sorry for the late reply and thanks for your time.
Ogichi117 said:
Hey, been busy since I posted this but I resolved the problem day before last. Sorry for the late reply and thanks for your time.
Click to expand...
Click to collapse
How did you fix it? I have the same problem
Related
After countless hours of searching for answers on how I could get ClockworkMod and the problems I have been having with getting into recovery mode on my LG NITRO HD for about a month Ive decided and hoped that if I post on XDA developers that someone might be able to help me figure out how to get my phone to enter recovery mode.
Ive had my phone for a few months and Ive been trying to root my phone so I can get CM9. I was successful at rooting my device and I have SU access. I downloaded a root explorer and I downloaded a terminal emulator from the Android Market.
The first thing I tried was:
Search for ROM Manager in the Market (free or paid) and install the app.
Open the ROM Manager application and select Flash ClockworkMod Recovery.
Click on LG Nitro HD and then give the app root permission if it prompts you.
If it hangs after that and freezes up, just allow the app to Force Close. Then open it back up and repeat steps 2 & 3.
Once the flash was successful, you should see a dialog box that says "Successfully flashed ClockworkMod recovery!".
Press OK.
The ClockworkMod Recovery should now be installed on the LG Nitro HD.
Okay thats great because it tells me that it is successful but when I try to enter recovery I get:
Enter the fastboot...
Enter the fastboot...
Long time no see!
Then after that I tried the Terminal Emulator, it ran some script for a while one time, that it actually looked like it may have worked, but when I took the battery out and I tried holding down the power+volumedwn key it will go back to the enter the fast boot long time no see but it will have moved down to the bottom of the screen.
...I am no expert at this and I have done so much research on it I almost want to quit, but I want CM9 so badly that I will try and try until something works. Every bit of information that I have found has been unhelpful and very confusing and hard to understand. I would very much appreciate if anyone else knew where I would be able to find the steps to resolve this issue so I can finally get into recovery mode.
...XD Thanks -Shannon
In the same boat.
Shavens907 said:
After countless hours of searching for answers on how I could get ClockworkMod and the problems I have been having with getting into recovery mode on my LG NITRO HD for about a month Ive decided and hoped that if I post on XDA developers that someone might be able to help me figure out how to get my phone to enter recovery mode.
Ive had my phone for a few months and Ive been trying to root my phone so I can get CM9. I was successful at rooting my device and I have SU access. I downloaded a root explorer and I downloaded a terminal emulator from the Android Market.
The first thing I tried was:
Search for ROM Manager in the Market (free or paid) and install the app.
Open the ROM Manager application and select Flash ClockworkMod Recovery.
Click on LG Nitro HD and then give the app root permission if it prompts you.
If it hangs after that and freezes up, just allow the app to Force Close. Then open it back up and repeat steps 2 & 3.
Once the flash was successful, you should see a dialog box that says "Successfully flashed ClockworkMod recovery!".
Press OK.
The ClockworkMod Recovery should now be installed on the LG Nitro HD.
Okay thats great because it tells me that it is successful but when I try to enter recovery I get:
Enter the fastboot...
Enter the fastboot...
Long time no see!
Then after that I tried the Terminal Emulator, it ran some script for a while one time, that it actually looked like it may have worked, but when I took the battery out and I tried holding down the power+volumedwn key it will go back to the enter the fast boot long time no see but it will have moved down to the bottom of the screen.
...I am no expert at this and I have done so much research on it I almost want to quit, but I want CM9 so badly that I will try and try until something works. Every bit of information that I have found has been unhelpful and very confusing and hard to understand. I would very much appreciate if anyone else knew where I would be able to find the steps to resolve this issue so I can finally get into recovery mode.
...XD Thanks -Shannon
Click to expand...
Click to collapse
I am pretty good with this and I am having that same cwm issue. Someone notice this thread please.
same boat too
Shagerty said:
I am pretty good with this and I am having that same cwm issue. Someone notice this thread please.
Click to expand...
Click to collapse
nobody here have a solution for this problem
I have no acces to recovery mode
still freeze on this message
Enter the fastboot...
Long time no see!
Got this meng!
dhcorp said:
nobody here have a solution for this problem
I have no acces to recovery mode
still freeze on this message
Enter the fastboot...
Long time no see!
Click to expand...
Click to collapse
I figured this one out a long time ago.. I can send you snaps of the device. I will need to figure out whatever procedure i had used to do this. Than i will post. Or nvm I remember it was a bad micro usb port on my phone. Try a new usb chord and if that does not work, than send it to samsung to repair, or replace your broken charging port, they just go bad after awhile.. its a bummer, but my note is running great now.
Hi everyone! As stated in the title my phone(p769) wont boot completely, I was in the middle of doing the bootloader unlock when I accidecntly replaced the bin during the root process of it with the wrong bin. Instead of replacing it with the v6 tmobile usa one I used the v5 canadian one. Now when I boot my phone up the lg screen is there and then eventually it just hits an android with a red exclamation point. I've tried Re-flashing while its in s/w upgrade mode with the flasher set to emergency, and Ive tried pressing the home button + vol down + power to no avail(it goes through the process but the same thing happens)
Any help at all would be greatly appreciated and many thanks in advance!
Edit: Also when I try to reflash, it just says it cant communicate with my phone. Ive uninstalled and reinstalled the drivers several times but seeing as how I cant acutally get into the phone Im not sure what else to do.
Edit 2: So ive been trying do something witht his for the past three hours and I cant get anywhere with it. I cant get the phone to show up as an adb device while its in s/w upgrade mode, and at the red exclamation point screenit shows up but as recovery and the lg tools fail to communicate with it. I would really appreciate if anyone knew how to deal with this.
Just in case anyone stumbles upon this and has the same issue I would like to say that i finally got mine fixed.
It has been a long day of frustrations but I finally got it there with the help of some awesome tutorials.
In order to fix it I had to fastboot my phone and flash the default loader and boot then my device would show up in my adb devices and I could sucessfully flash and root it.
hufger said:
Just in case anyone stumbles upon this and has the same issue I would like to say that i finally got mine fixed.
It has been a long day of frustrations but I finally got it there with the help of some awesome tutorials.
In order to fix it I had to fastboot my phone and flash the default loader and boot then my device would show up in my adb devices and I could sucessfully flash and root it.
Click to expand...
Click to collapse
how you resolve it?
saman_z1384 said:
how you resolve it?
Click to expand...
Click to collapse
I followed the fastboot tutorial and searched around in the help forum for people with similar issues and found a post where lelus posted both of the files I needed to flash with fastboot, from there I just put my phone in s/w upgrade mode and followed Lelus guide for root/flash
I had rooted my T mobile LG G2 yesterday, loaded TWRP today - THOUGHT I had created a back up, then loaded Titanium (free-so no freeze).
Was cleaning up the bloatware and was doing fine, until (yes, I know I'm an idiot) I deleted "Home" and everything went black. Finally got back to TWRP and there is no saved ROM to restore and it gives the error message that it can't locate the storage.
So I can't recovery through TWRP, the adb doesn't recognize any device and I can't do a factory reset... anyone have any ideas of how I can fix this?
Thanks in advance and please don't revoke my learner's permit. :
Learnerspermit said:
I had rooted my T mobile LG G2 yesterday, loaded TWRP today - THOUGHT I had created a back up, then loaded Titanium (free-so no freeze).
Was cleaning up the bloatware and was doing fine, until (yes, I know I'm an idiot) I deleted "Home" and everything went black. Finally got back to TWRP and there is no saved ROM to restore and it gives the error message that it can't locate the storage.
So I can't recovery through TWRP, the adb doesn't recognize any device and I can't do a factory reset... anyone have any ideas of how I can fix this?
Thanks in advance and please don't revoke my learner's permit. :
Click to expand...
Click to collapse
go to emergency mode and flash the stock rom
nasheich said:
go to emergency mode and flash the stock rom
Click to expand...
Click to collapse
I googled LG G2 emergency mode 15 different ways and finally found "GRUB", but it says it not available anymore except FTP, which obviously I can't do.
Sorry for being the noob but could you be a little more detailed on this, as this is my first android root and consequentially my 1st destruction of my phone. I literally have 2 days experience gained from 'attempting' to understand the whole process. :cyclops:
Learnerspermit said:
I googled LG G2 emergency mode 15 different ways and finally found "GRUB", but it says it not available anymore except FTP, which obviously I can't do.
Sorry for being the noob but could you be a little more detailed on this, as this is my first android root and consequentially my 1st destruction of my phone. I literally have 2 days experience gained from 'attempting' to understand the whole process. :cyclops:
Click to expand...
Click to collapse
go to this thread for the guide
http://forum.xda-developers.com/showthread.php?t=2432476
and learn more about your device here
http://forum.xda-developers.com/lg-g2
nasheich said:
go to this thread for the guide
http://forum.xda-developers.com/showthread.php?t=2432476
Thanks again. I had already followed this thread, but when I entered download mode, a firmware update started. Stopped immediately at 0% and gave me a "rooted" in red letters at the bottom.
Then found this video:http://www.youtube.com/watch?v=z6SGWR0hGg4 and realized that I should proceed anyway. Got to the same point he did at 8:00 but when undid and reconnected the program continued. My just keep saying the phone wasn't connected by usb.
Click to expand...
Click to collapse
Turns out I didn't have the correct usb drivers on the computer... finally got it back up and running, so thanks for the input. Now I have to make sure that I back it up CORRECTLY this time on TWRP.
Learnerspermit said:
Turns out I didn't have the correct usb drivers on the computer... finally got it back up and running, so thanks for the input. Now I have to make sure that I back it up CORRECTLY this time on TWRP.
Click to expand...
Click to collapse
great to know it
you're welcome
don't forget to hit THANKS buttons too
I recently rooted my Lg G stylo (Metro). I was messing around with the Clockwork Mod Recovery. Long story short, I had to reboot into recovery but I keep getting a "Secure Booting Error" "Error code 1003". It keeps restarting over and over again and the same message keeps popping up. The screen doesn't pass the logo, it just shuts down after the error message shows up. repeat
There is no way to access the homescreen or anything. I trying to factory reset by holding the VOLUME DOWN + POWER KEY. It works. I get a menu that says Perform a factory reset , [Yes/NO]. When i click yes, the reset begins but after a while it shuts down and continues to repeat the same message. "Secure booting Error". "Error Code 1003". I have also been able to acces download mode where the screen would say firmware update/Usb. But idk what to do after that. Im pretty sure its not bricked since it still turns on.
Did you unlock the bootloader before you rooted or did you use one-click rooting apps to root your phone?
I have the same problem
mnunez12 said:
Did you unlock the bootloader before you rooted or did you use one-click rooting apps to root your phone?
Click to expand...
Click to collapse
The way mine happend is I tried installing twrp image with flashify and I know I installed it under the wrong one I clicked in the option above recovery anyways now I'm stuck on that.... So please help my warranty is over don't want to get a new phone.
Did figure how to recover phone?
ProblemMaker said:
The way mine happend is I tried installing twrp image with flashify and I know I installed it under the wrong one I clicked in the option above recovery anyways now I'm stuck on that.... So please help my warranty is over don't want to get a new phone.
Click to expand...
Click to collapse
i have the same problem
As a new owner of an LG G Stylo MS631 (the Metro PCS model) I had the same issue just yesterday when working with GameTheory's Katana ROM and he pointed out that when the Secure Booting Error Code 1003 shows up it's because you have to go into the Developer Options (tap the build version 7 times under Settings - About phone - Software Info, back out two steps and then find the new setting just above About phone) and check the box next to "Enable OEM unlock" - this doesn't unlock the bootloader but it does allow you to use tools like TWRP without hassles or some of the reboot to recovery apps.
If you're getting the error and you can't get past it in any respect, you're going to need to flash the factory KDZ to get it truly useful again. That's what I ended up doing because there simply was no other way to get recovery or anything else working.
Flash the KDZ back to pure stock, go into the Developer Options and enable that option (Enable OEM unlock) and then go about rooting/flashing TWRP/etc.
Good luck...
FIXED
br0adband said:
As a new owner of an LG G Stylo MS631 (the Metro PCS model) I had the same issue just yesterday when working with GameTheory's Katana ROM and he pointed out that when the Secure Booting Error Code 1003 shows up it's because you have to go into the Developer Options (tap the build version 7 times under Settings - About phone - Software Info, back out two steps and then find the new setting just above About phone) and check the box next to "Enable OEM unlock" - this doesn't unlock the bootloader but it does allow you to use tools like TWRP without hassles or some of the reboot to recovery apps.
If you're getting the error and you can't get past it in any respect, you're going to need to flash the factory KDZ to get it truly useful again. That's what I ended up doing because there simply was no other way to get recovery or anything else working.
Flash the KDZ back to pure stock, go into the Developer Options and enable that option (Enable OEM unlock) and then go about rooting/flashing TWRP/etc.
Good luck...
Click to expand...
Click to collapse
Thanks. I finally fixed it thanks to this!!!!!
how do I flash the kdz back to pure stock if I can't get past the error message? Please help, thank you!
T mobile kdz file ?
soccereclipse087 said:
how do I flash the kdz back to pure stock if I can't get past the error message? Please help, thank you!
Click to expand...
Click to collapse
Did you get a answer? Also where can I find the kdz file?
Hello, I just soft brick my MS631 this morning. I had the phone rooted perfectly fine withthe katana ROM. Then, I stupidly use the reboot recovery option that is baked into the ROM withough developer options enabled and OEM chec (I forgot). Now, I get the looping Secure Booting Error 1003. If, I do the factory reset step (hold power and vol down) I get to the factory reset options, but when I select YES, it'll go through the loop again. HELP please, as I A) cant afford another phone right now and B) don't want to go back using my Windows 640 LTE phone with MetroPCS.
botbro86 said:
Hello, I just soft brick my MS631 this morning. I had the phone rooted perfectly fine withthe katana ROM. Then, I stupidly use the reboot recovery option that is baked into the ROM withough developer options enabled and OEM chec (I forgot). Now, I get the looping Secure Booting Error 1003. If, I do the factory reset step (hold power and vol down) I get to the factory reset options, but when I select YES, it'll go through the loop again. HELP please, as I A) cant afford another phone right now and B) don't want to go back using my Windows 640 LTE phone with MetroPCS.
Click to expand...
Click to collapse
I did a similar thing. Go to HERE and follow GameTheory's unbrick guide. If you have problems downloading the KDZ like I did, then try getting it HERE
I actually did GT steps right after this post. Im now back on Katana and learned from my mistakes lol
I accidentally used king root without developer mode enabled
I also bricked my phone to the point of it being unusable. I am running on boost mobile and I am using android marshmallow 6.0. My phone said it was rooted after using the 1 Click root app and I went to start it and it now says 'security ERROR MODDED 1003'. I am stressed out at this point and I have reset it via developer menu about 3 times to no avail. I am familiar with rooting and roms but I'm not really used to using code. I'm stock everything and I am running on Boost mobile. If anyone can find a boost rom for me to use it may be possible to put my phone in download mode. I do have an sd card if it is needed to load a zip on. Please help me get my phone booted again! I believe a sprint KDZ may work but I can not find one for download anywhere. Thanks !
This may happened to me too. I am on the Boost version as well. I used the king root app to root the phone then I tried to install the adaway app. When the app told me to reboot the phone, I clicked okay but I hit the secure bootloop. I didn't even try to install a recovery. How do I fix this?!?!?!
---------- Post added at 11:01 AM ---------- Previous post was at 10:59 AM ----------
Micgizel said:
I also bricked my phone to the point of it being unusable. I am running on boost mobile and I am using android marshmallow 6.0. My phone said it was rooted after using the 1 Click root app and I went to start it and it now says 'security ERROR MODDED 1003'. I am stressed out at this point and I have reset it via developer menu about 3 times to no avail. I am familiar with rooting and roms but I'm not really used to using code. I'm stock everything and I am running on Boost mobile. If anyone can find a boost rom for me to use it may be possible to put my phone in download mode. I do have an sd card if it is needed to load a zip on. Please help me get my phone booted again! I believe a sprint KDZ may work but I can not find one for download anywhere. Thanks !
Click to expand...
Click to collapse
This may happened to me too. I am on the Boost version as well. I used the king root app to root the phone then I tried to install the adaway app. When the app told me to reboot the phone, I clicked okay but I hit the secure bootloop. I didn't even try to install a recovery.
What if you cant get the phone to do anything outside of the boot loop?
br0adband said:
As a new owner of an LG G Stylo MS631 (the Metro PCS model) I had the same issue just yesterday when working with GameTheory's Katana ROM and he pointed out that when the Secure Booting Error Code 1003 shows up it's because you have to go into the Developer Options (tap the build version 7 times under Settings - About phone - Software Info, back out two steps and then find the new setting just above About phone) and check the box next to "Enable OEM unlock" - this doesn't unlock the bootloader but it does allow you to use tools like TWRP without hassles or some of the reboot to recovery apps.
If you're getting the error and you can't get past it in any respect, you're going to need to flash the factory KDZ to get it truly useful again. That's what I ended up doing because there simply was no other way to get recovery or anything else working.
Flash the KDZ back to pure stock, go into the Developer Options and enable that option (Enable OEM unlock) and then go about rooting/flashing TWRP/etc.
Good luck...
Click to expand...
Click to collapse
i have tried holding down the volume down button and the power button at the same time but it doesnt do anything.. it makes the error code disappear for a split second and then it just comes back, it doesnt go into a normal boot option.. it doesnt go into a recovery mode of any kind to download anything to it.. can you help?
sherryf said:
i have tried holding down the volume down button and the power button at the same time but it doesnt do anything.. it makes the error code disappear for a split second and then it just comes back, it doesnt go into a normal boot option.. it doesnt go into a recovery mode of any kind to download anything to it.. can you help?
Click to expand...
Click to collapse
I wish I could offer some help but I haven't owned an LG Stylo since I made that post - I literally sold that one the following day. Hopefully someone else might be able to provide some assistance.
Good luck...
br0adband said:
I wish I could offer some help but I haven't owned an LG Stylo since I made that post - I literally sold that one the following day. Hopefully someone else might be able to provide some assistance.
Good luck...
Click to expand...
Click to collapse
Thank you so much for responding to me even though you couldnt help. . i appreciate that..
is there a way to fix it
arbyn said:
I did a similar thing. Go to HERE and follow GameTheory's unbrick guide. If you have problems downloading the KDZ like I did, then try getting it HERE
Click to expand...
Click to collapse
Sorry for the bump on this thread. I followed the unbrick guide mentioned here, and all seems like a GO... except a lost service. Screen Lock says "No Service", but I am receiving text messages from contacts.
lg ls770 (boost)
Lg stylo ls770 boost
My stylo is showing the same error 1003 and on bootloop. Can someone help me figure out where to go to get the fIles to restore it back to stock.
PM or email me if you can help TIA
help
the issue im running into using the tutorial to flash the metro kdz is it says it got disconnected from the server. any ideas?
Oh guys, I badly need your experties. Just as I have in the title, I have a rooted Meizu M5 Note. I rooted the phone believing that I can do much more if it is rooted. But in 6 months of trying to understand what I can do with this said rooted phone, I realized now that there are not much to do with it... Probably because of the brand, so I decided to unroot
The rooting process was from here: giving me error so if requested, i'll give the link.
I have an Android build 7.0.0.0
So here is my issue:
In the same site, I found that I can unroot.. yes, UNROOT the rooted model of phone using superSU by going to its Settings and clicking unroot (or Unroot all something..). It took a bit while, so I decided to restart the device. Yes, while SuperSU was trying to unroot my phone.
Upon restart, it now could not boot.
I allowed 30 minutes, the screen only shows Flyme logo with a spinning circle. So from here, I made up my mind to perform the factory reset/restore:
Turned off Phone > Press and hold Power key + Volume Up... until I reach the screen with options to:
-Update system.
-Wipe data.
I selected Wipe data, for it will reset the system settings. It will now show the
"Wiping data.
Please dont turn off the phone, or it may fail to boot"
It will only last for 2 seconds - and will then again reboot and stop in Flyme logo with a never ending spin below.
_________________
It was already the factory reset, which I thought should help, but it wont work.
_________________
Things I tried:
- Used ADB to flash an offcial update rom from the flymeos.com, but the ADB Flashtool would not read the device because the USB Debugging is turned OFF.
- Googling any possible solutions, but cannot find any - nor any known programs that will allow me to read the not booting phone.
- Fast boot or safe mode, which only wont proceed.
- The Recovery Menu (the un-clickable one) must be locked by the manufacturer.
Can anyone please tell me:
- Is there anyway I can access the phone's drive so I can put the Update zip folder, which will help me to use the 1st recovery option "Update system"??
- Do you have any software that can help me enable the USB debugging when the phone wont boot at all??
Thanks guys..
All the help I can get will be best appreciated.
I tried posting this to forum.FlymeOS, but no one seems to have any interest on helping.
It is now you, that i think can help.
This is my Only phone, and cant afford to lose it...
Same issue with my Meizu M5 Note. I tried a tutorial on how to unlock it's bootloader. But after going through the first step, the SP Flash tool showed some error on how it does not turn on our go recover mode or anything... In really sad
Somebody please help!
RogueDiamond195 said:
Same issue with my Meizu M5 Note. I tried a tutorial on how to unlock it's bootloader. But after going through the first step, the SP Flash tool showed some error on how it does not turn on our go recover mode or anything... In really sad
Somebody please help!
Click to expand...
Click to collapse
Looks to me that you've bricked the phone.
jwoegerbauer said:
Looks to me that you've bricked the phone.
Click to expand...
Click to collapse
Yeah... Well, atleast I can ask for new phone now! LMAO