factory data reset is disabled by kill switch lg v30 - LG V30 Questions & Answers

hello guys sorry for my english...i recently unlocked the booloader of my v30 h930, but when i try to enter twrp recovery after flashing the image via fastboot comands,i found this frustrating message "factory data reset is disabled by kill switch"...is there any thing to do ?? thanks again

Odd. Did you flash the twrp image, and then boot the image? as per the WTF instructions?
What command, specifically, are you entering, and then getting this message?

Sounds like twrp didn't install. Make sure you go through all the steps from WTF correctly
Sent from my LG-US998 using Tapatalk

yahya2110 said:
hello guys sorry for my english...i recently unlocked the booloader of my v30 h930, but when i try to enter twrp recovery after flashing the image via fastboot comands,i found this frustrating message "factory data reset is disabled by kill switch"...is there any thing to do ?? thanks again
Click to expand...
Click to collapse
Normally we only see that on U.S. T-Mobile H932 which has crappy McAfee installed. Has to be uninstalled before factory reset or you get that error message. Do you have something like that installed?

yahya2110 said:
hello guys sorry for my english...i recently unlocked the booloader of my v30 h930, but when i try to enter twrp recovery after flashing the image via fastboot comands,i found this frustrating message "factory data reset is disabled by kill switch"...is there any thing to do ?? thanks again
Click to expand...
Click to collapse
ChazzMatt said:
Normally we only see that on U.S. T-Mobile H932 which has crappy McAfee installed. Has to be uninstalled before factory reset or you get that error message. Do you have something like that installed?
Click to expand...
Click to collapse
Personally I have never seen that McAfee stuff on my H932, but maybe it's something you have to deliberately install first.
But we have had others report about this error. As I have posted before, I think it is just "something" (McAfee or whatever) trying to save you from wiping the phone in a way that would trigger Android Factory Reset Protection: The entire point of FRP is to render the phone useless to anyone but the legitimate owner, in case it is wiped from outside the OS while an account is active in the OS. That is a sensible protection. I always wondered why LGs Master Reset (using the buttons) doesn't warn about this before proceeding with its wipe.
But if indeed the error reported by OP is caused by such "protection against unintended triggering of FRP" then the solution should be to remove the Google account in the OS before performing any actions that would wipe the phone outside the OS (LGUP, Master Reset, TWRP etc). Alternatively, perform a Factory Reset from inside the OS first, which also will remove the account in a way that doesn't trigger FRP.
Arguably, this should be mentioned in the various root/WTF/Frankenstein guides, since FRP can have unintended consequences, say in case a user flashes the phone back to stock before selling it or sending it in for repair, and doesn't remove his/her account first. In that case the phone will (or should) demand that the same account be entered on first boot -- and the new owner or repair center would be stuck.
But maybe LGUP Refurbish mode clears FRP, and that's why we don't get more complaints about it...
I apologize if this turns out to be completely unrelated to the error reported by OP

Don't worry I've been through this problem and solution ia simple.
-Boot the phone in normal.
-Plug in the usb cable in your phone and connect to the computer.
-Then type "adb reboot bootloader". When u boot into fastbooot then type "fasboot boot recovery or whatever u named the file.
-Then u will boot into twrp.

I was sold a refurbished v30 off Amazon that had this kill switch enabled also when trying to go into TWRP. I had to return it because it might have been stolen.
Sent from my iPad using Tapatalk

I bought a V30 on ebay, is a LS998 Frankenstein, the problem is that the installed ROM is the AS998 and not the US998, it has the kill switch problem. Some way to solve it? I can not access fastboot and I can not install the ROM US998 from LGUP. I tried installing the KDZ US998 from LG UP with Partition UP option but it does not boot. Some way to return to the LS998 ROM?

jorgeaoc said:
I bought a V30 on ebay, is a LS998 Frankenstein, the problem is that the installed ROM is the AS998 and not the US998, it has the kill switch problem. Some way to solve it? I can not access fastboot and I can not install the ROM US998 from LGUP. I tried installing the KDZ US998 from LG UP with Partition UP option but it does not boot. Some way to return to the LS998 ROM?
Click to expand...
Click to collapse
There are no public LS998 KDZ available.
Which US998 KDZ did you try? If you read the Frankenstein instructions you need to start with US998 Nougat first.
Yes, of the North America V30 variants, only US998 has full fastboot flash commands.

ChazzMatt said:
There are no public LS998 KDZ available.
Which US998 KDZ did you try? If you read the Frankenstein instructions you need to start with US998 Nougat first.
Click to expand...
Click to collapse
The phone came with the ROM AS99820b (Oreo) :crying:, try to install US99810d and US99820b KDZ. Only the Partition DL option works in the LGUP application, but the phone not boot. The other options show Error: 0x4, Not support cross model download AS998 to US998 . Do you know any way to jump to the US ROM?
ChazzMatt said:
Yes, of the North America V30 variants, only US998 has full fastboot flash commands.
Click to expand...
Click to collapse
Do you know if the previous ways to root the LG G works on the V30?

jorgeaoc said:
The other options show Error: 0x4, Not support cross model download AS998 to US998 ?
Click to expand...
Click to collapse
Are you using the Dev Patched LGUP?

ChazzMatt said:
Are you using the Dev Patched LGUP?
Click to expand...
Click to collapse
Yes, the LGUP patch in the [Frankenstein Phone] Using LGUP for crossflashing Post #168

jorgeaoc said:
Yes, the LGUP patch in the [Frankenstein Phone] Using LGUP for crossflashing Post #168
Click to expand...
Click to collapse
And do you get the cross flashing error when trying to install US998 10D Nougat?

ChazzMatt said:
And do you get the cross flashing error when trying to install US998 10D Nougat?
Click to expand...
Click to collapse
Yes, when I try to install the two US KDZ ROMs Nougat and Oreo

jorgeaoc said:
Yes, when I try to install the two US KDZ ROMs Nougat and Oreo
Click to expand...
Click to collapse
I ran across this before where some dealer probably used Octopus box to convert LS998 to AS998 and the new owner couldn't then convert to anything else...
All I can suggest is you try Board DL or Refurbish mode.

Is wiping the system partition the same thing as factory data reset? Will that trigger ye' old kill switch?
I ask, because I've run into the cross-flash warning once before while trying to flash US998 while on VZ996. To get rid of that message, I simply wiped my system partition in TWRP and was then able to use LGUP with the US998 KDZ.
So if you can wipe your system partition, then maybe it will get you to a spot where you can kdz?

I got it!
After many attempts, use a LGUP that I found in the LG G7 forum, the difference is that it was from CLI, restore the KDZ Nougat, when restarting appeared a screen with the android doll and the text without command. The next step was not clear, I pressed all the buttons with different convincing. The phone restarted several times and remained in the same window, in one of those attempts I went to the LG logo and to the initial configuration, the phone was blocked by google. Surely this is the reason why the seller installed the ROM AS998.
Turn off the phone and from LGUP update to the Oreo version. Again the error of blocking by google. On YouTube I found a tutorial to bypass this step. Now I am in the US99820b version. I followed the steps to unlock the bootloader, I had a problem with the USB cable, I must use a good quality cable. The problem of the message "factory data reset is disabled by kill switch" continues, but I can enter TWRP from fastboot.
I will try to install a ROM from TWRP and see if the message disappears.

jorgeaoc said:
I got it!
After many attempts, use a LGUP that I found in the LG G7 forum, the difference is that it was from CLI, restore the KDZ Nougat, when restarting appeared a screen with the android doll and the text without command. The next step was not clear, I pressed all the buttons with different convincing. The phone restarted several times and remained in the same window, in one of those attempts I went to the LG logo and to the initial configuration, the phone was blocked by google. Surely this is the reason why the seller installed the ROM AS998.
Turn off the phone and from LGUP update to the Oreo version. Again the error of blocking by google. On YouTube I found a tutorial to bypass this step. Now I am in the US99820b version. I followed the steps to unlock the bootloader, I had a problem with the USB cable, I must use a good quality cable. The problem of the message "factory data reset is disabled by kill switch" continues, but I can enter TWRP from fastboot.
I will try to install a ROM from TWRP and see if the message disappears.
Click to expand...
Click to collapse
You can also enter TWRP using the Recovery Reboot app I recommend in the WTF instructions.
US998 20B is old (but necessary for bootloader unlock). You should update to US998 20H. Download 20E, 20F, 20G, 20H and dirty flash back-to-back, using TWRP auto queue function -- with flashing Magisk last.

ChazzMatt said:
You can also enter TWRP using the Recovery Reboot app I recommend in the WTF instructions.
US998 20B is old (but necessary for bootloader unlock). You should update to US998 20H. Download 20E, 20F, 20G, 20H and dirty flash back-to-back, using TWRP auto queue function -- with flashing Magisk last.
Click to expand...
Click to collapse
Excellent, I'm going to try LineageOS first, where do I find the 20E, 20F, 20G, 20H zip updates?

jorgeaoc said:
Excellent, I'm going to try LineageOS first, where do I find the 20E, 20F, 20G, 20H zip updates?
Click to expand...
Click to collapse
NO. You need to be on newest firmware before flashing any AOSP/Lineage ROMs due to recent changes. That's where people mess up. They try to go from old Oreo or even Nougat (H932) firmware to custom ROMs. You need foundation of newest firmware. Read post #2 of this sticky:
https://forum.xda-developers.com/lg-v30/how-to/root-v30-t3927154
A whole lot of recent posts in Lineage are about people not updating their stock firmware first.
Here's the US998 KDZ/TWRP-flashable thread:
https://forum.xda-developers.com/lg-v30/development/us998-lg-v30-us998-us99820a040330-kdz-t3786337

Related

Dead ls998

Well i seem to have nuked my LS998 when trying to LG UP Cross flash via Frankenstein (LG UP gave me an error) after flashing AIS and loosing Modem......i can still boot TWRP from boot loader if i use "fastboot boot TWRP.img" , but if i try to install it it gives me "C:\Users\juanj\Desktop\platform-tools>fastboot flash TWRP.img
unknown partition 'TWRP.img'
fastboot: error: cannot determine image filename for 'TWRP.img'" and if i try to go into download mode again in order to try LG UP again, but before connecting it will bootloop so it seems i have removed not just recovery partition but also download mode partition and system partition .-.
6th_Hokage said:
i can still boot TWRP from boot loader if i use "fastboot boot TWRP.img".
Click to expand...
Click to collapse
Of course, this means you are booting to TWRP from copy on your PC -- a.k.a "temp" TWRP.
6th_Hokage said:
if i try to go into download mode again in order to try LG UP again, but before connecting it will bootloop so it seems i have removed not just recovery partition but also download mode partition and system partition .-.
Click to expand...
Click to collapse
Wow.
1) What happens if you Master Reset, then try to go into Download mode?
2) What happens if from temp TWRP you flash this US998 TWRP file?
https://forum.xda-developers.com/lg-v30/development/v300s-stock-flashable-zip-us998-t3795995
Someone really messed up their system one time and only recovered by flashing that. Yes, it was made by/for the Korea guy to flash on their Korea carrier variants, but someone with Sprint LS998 was able to use it. No guarantees from me, just a suggestion.
3) What happens if you flash this other TWRP flashable US998 TWRP file with temp TWRP?
https://forum.xda-developers.com/lg-v30/development/rom-lg-us998-20b-rom-t3813923
4) What happens if you flash this WETA beta ROM with temp TWRP?
https://forum.xda-developers.com/showpost.php?p=76981435&postcount=136
ChazzMatt said:
Of course, this means you are booting to TWRP from copy on your PC -- a.k.a "temp" TWRP.
Wow.
1) What happens if you Master Reset, then try to go into Download mode?
2) What happens if from temp TWRP you flash this US998 TWRP file?
https://forum.xda-developers.com/lg-v30/development/v300s-stock-flashable-zip-us998-t3795995
Someone really messed up their system one time and only recovered by flashing that. Yes, it was made by/for the Korea guy to flash on their Korea carrier variants, but someone with Sprint LS998 was able to use it. No guarantees from me, just a suggestion.
3) What happens if you flash this other TWRP flashable US998 TWRP file with temp TWRP?
https://forum.xda-developers.com/lg-v30/development/rom-lg-us998-20b-rom-t3813923
4) What happens if you flash this WETA beta ROM with temp TWRP?
https://forum.xda-developers.com/showpost.php?p=76981435&postcount=136
Click to expand...
Click to collapse
I first tried restoring stock ls998 back up from temp root and it went through, but still bootloop. If I try doing the master reset it acts like it wants to go to recovery but then bootloops. Same trying to go to DL Mode after master reset...I will try your suggestions and report back
Ypu have to download lgup hacked and flash kdz on partition dl
---------- Post added at 02:46 AM ---------- Previous post was at 02:45 AM ----------
dami00976 said:
Ypu have to download lgup hacked and flash kdz on partition dl
Click to expand...
Click to collapse
That rom is a no go for me no matter if its fix our not simply to dangerous.
Some how flashing 20b gave me back download mode .-. will try LG UP again
And it gave me the error again :/
And if I try the upgrade instead
If I partition dl everything except for the system then it 100% completes ._.
And after that 100% now it's showing up as the correct model....
And I think there was an error when I downloaded the KDZ's so I'm re downloading them both
Okay so i successfully LG UP'd to Nougat but upon reboot it went straight to bootloader and not system, so i went ahead and flashed Oreo and same thing again...but this time i was able to flash TWRP....but i can install a rom but it will instead boot into bootloader....
6th_Hokage said:
Okay so i successfully LG UP'd to Nougat but upon reboot it went straight to bootloader and not system, so i went ahead and flashed Oreo and same thing again...but this time i was able to flash TWRP....but i can install a rom but it will instead boot into bootloader....
Click to expand...
Click to collapse
After going to US998 Nougat, usually you have to do a Master Reset to stabilize.
Normally then you can just "upgrade" to US998 Oreo, but I would suggest DL PARTITION method (with all partitions).
I just ordered an LS998U and plan to convert it to a US998U. I need to use it on MetroPCS, so the conversion is necessary before I can even use the device.
Interested to see how you get along with resolving the issues you are seeing. Just an observation, obviously having no experience with the V30 but I'd check your USB configuration (drivers, other devices etc.) and try another cable. It seems you are getting some odd /unexpected errors during flash in LGUP. When I had my G3, I had some odd errors with the LG Flash Tool (which is legacy I assume?) and needed to use specific USB cables to flash KDZ files.
ChazzMatt said:
After going to US998 Nougat, usually you have to do a Master Reset to stabilize.
Normally then you can just "upgrade" to US998 Oreo, but I would suggest DL PARTITION method (with all partitions).
Click to expand...
Click to collapse
I went ahead and did the master reset on both Nougat and Oreo and it actually does the erase but then boots straight into bootloader...
One thing i have noticed when using LGUP is that even if i Partition DL completely it goes pretty fast but the moment i flash TWRP and then do LGUP again it takes like an hour longer to complete...
6th_Hokage said:
I went ahead and did the master reset on both Nougat and Oreo and it actually does the erase but then boots straight into bootloader...
Click to expand...
Click to collapse
So you have flashed Oreo KDZ in LGUP using Upgrade/Partition DL (20a or 20b since the unlock flaw is patched in 20d) and upon reboot your device is going straight into bootloader?
6th_Hokage said:
One thing i have noticed when using LGUP is that even if i Partition DL completely it goes pretty fast but the moment i flash TWRP and then do LGUP again it takes like an hour longer to complete...
Click to expand...
Click to collapse
I am confused, if you completed the Frankenstein conversion you should have an unlocked US998 (stock, not rooted). The phone technically could be used as is correct? If you are attempting installing TWRP, you have already gone through the bootloader unlock successfully? I think you need to get a stable device running 20a or 20b of US998 Oreo before attempting to move to the bootloader unlock/TWRP/encryption/root in the WTF thread.
I am going to be doing this in a few days so I'd like to understand where you're at and what the next steps would be...
jdgesmlls said:
So you have flashed Oreo KDZ in LGUP using Upgrade/Partition DL (20a or 20b since the unlock flaw is patched in 20d) and upon reboot your device is going straight into bootloader?
I am confused, if you completed the Frankenstein conversion you should have an unlocked US998 (stock, not rooted). The phone technically could be used as is correct? If you are attempting installing TWRP, you have already gone through the bootloader unlock successfully? I think you need to get a stable device running 20a or 20b of US998 Oreo before attempting to move to the bootloader unlock/TWRP/encryption/root in the WTF thread.
I am going to be doing this in a few days so I'd like to understand where you're at and what the next steps would be...
Click to expand...
Click to collapse
I already have the bootloader unlocked i completed both Frankenstein and WTF like a month or so ago but in theory you could still install twrp after either Nougat or Oreo flash...and be on your marry way but the only thing that isn't going correctly is the flashing of the system...cause it's booting straight into bootloader....
jdgesmlls said:
I am confused, if you completed the Frankenstein conversion you should have an unlocked US998 (stock, not rooted). The phone technically could be used as is correct? If you are attempting installing TWRP, you have already gone through the bootloader unlock successfully?
I think you need to get a stable device running 20a or 20b of US998 Oreo before attempting to move to the bootloader unlock/TWRP/encryption/root in the WTF thread.
I am going to be doing this in a few days so I'd like to understand where you're at and what the next steps would be...
Click to expand...
Click to collapse
He installed something he said messed the phone partitions up. So, he's been trying to recover from that, and get back to what he had before which was bootloader unlocked and rooted US998.
The Frankenstein method works on normal V30 variant, but somehow his download and recovery partitions were deleted due to what he did prior to starting this thread.
However, DL PARTITION method should have restored them. So, I'm a little confused also.
---------- Post added at 05:27 PM ---------- Previous post was at 05:26 PM ----------
ChazzMatt said:
Of course, this means you are booting to TWRP from copy on your PC -- a.k.a "temp" TWRP.
Wow.
1) What happens if you Master Reset, then try to go into Download mode?
2) What happens if from temp TWRP you flash this US998 TWRP file?
https://forum.xda-developers.com/lg-v30/development/v300s-stock-flashable-zip-us998-t3795995
Someone really messed up their system one time and only recovered by flashing that. Yes, it was made by/for the Korea guy to flash on their Korea carrier variants, but someone with Sprint LS998 was able to use it. No guarantees from me, just a suggestion.
3) What happens if you flash this other TWRP flashable US998 TWRP file with temp TWRP?
https://forum.xda-developers.com/lg-v30/development/rom-lg-us998-20b-rom-t3813923
4) What happens if you flash this WETA beta ROM with temp TWRP?
https://forum.xda-developers.com/showpost.php?p=76981435&postcount=136
Click to expand...
Click to collapse
Did you try #2 yet?
ChazzMatt said:
He installed something he said messed the phone partitions up. So, he's been trying to recover from that, and get back to what he had before which was bootloader unlocked and rooted US998.
The Frankenstein method works on normal V30 variant, but somehow his download and recovery partitions were deleted due to what he did prior to starting this thread.
However, DL PARTITION method should have restored them. So, I'm a little confused also.
---------- Post added at 05:27 PM ---------- Previous post was at 05:26 PM ----------
Did you try #2 yet?
Click to expand...
Click to collapse
Well i got DL mode back and recovery mode seems to have come back, which is reinforced by the fact that the Master Reset goes through with the Erase. but The System doesn't want to come back even though it flashes 100% in LGUP, right now i'm trying 10C and 20B to see if that does anything to the phone....
And i have not tried the 2nd method.

Did I just brick my Phone?

Ok I just got my ATT V30 , works great but wanted to switch to US998 as ATT hotspot dont work, I try to flash us99820g and LGUP and selecting all the partitions, after click start LGUP told me some partitions will change and I click yes (my bad) and after all the process completed the phone is in a boot loop and all I can see is the Android green robot with an red exclamation and the reboots, is there any way to fix it or I sent $130 to the trash can.
If I keep vol - and power it reboots and I can see LG V30 thinkq logo but then the loop starts again.
PonchosoftX said:
Ok I just got my ATT V30 , works great but wanted to switch to US998 as ATT hotspot dont work, I try to flash us99820g and LGUP and selecting all the partitions, after click start LGUP told me some partitions will change and I click yes (my bad) and after all the process completed the phone is in a boot loop and all I can see is the Android green robot with an red exclamation and the reboots, is there any way to fix it or I sent $130 to the trash can.
If I keep vol - and power it reboots and I can see LG V30 thinkq logo but then the loop starts again.
Click to expand...
Click to collapse
No it's not bricked.
But you need to read the Frankenstein instructions. You can't just flash other KDZ willy nilly.
For North America variants (except for T-Mobile H932), you have to use Dev Patched LGUP and flash US998 Nougat, then Master Reset, then US998 Oreo.
https://forum.xda-developers.com/showpost.php?p=76510671&postcount=168
Sent via open market LG US998 V30/V30+
ChazzMatt said:
No it's not bricked.
But you need to read the Frankenstein instructions. You can't just flash other KDZ willy nilly.
For North America variants (except for T-Mobile H932), you have to use Dev Patched LGUP and flash US998 Nougat, then Master Reset, then US998 Oreo.
https://forum.xda-developers.com/showpost.php?p=76510671&postcount=168
Sent via open market LG US998 V30/V30+
Click to expand...
Click to collapse
Thank you, I miss the part where I have to flash Nougat then Oreo, I was on ATT oreo and then flash US998 Oreo, now I was able to enter download mode and do a factory reset but phone keeps reset after I try to enter the wifi setup, let me try flash Nougat and the oreo and see If works
Thank you.
Phone is now fully working, thanks so much for your help. Please close this thread if possible.

[Q] Download Mode issues

So, got my V30 here, Frankensteined H931 to US998, never had basically any issues with it so far. Decided to attempt to install the TWRP flashable US998 30b from John Fawkes and that's when all hell broke loose. But I won't get into all that, here's the primary issue now:
I get Download Mode when I power the V30 off and hold Volume Up + insert USB cable (and I've done this with multiple USB cables as well as multiple USB ports), but I never get a connection to the computer anymore in that mode. Nothing, no connects at all, no sounds to indicate a connection, while the V30 shows it's in Download Mode and is waiting for a connection.
If I power it off back to TWRP (3.2.3.7, just flashed earlier as instructed because of the Pie attempt), I get all the proper connections, sounds, etc, can copy files over to the internal as well as external storage, no issues.
Normally when most people say they can't get into Download Mode it's some issue where the device won't power on into that mode when the USB cable is attached - that's not the case here as stated: it powers on and says Download Mode and waiting for a connection, but regardless of any USB cable or port there's never a connection.
I'm suspecting it's a software issue since obviously on a reboot into TWRP the USB port works exactly as expected.
Any suggestions? Because of this I'm unable to do a clean proper US998 20h KDZ flash or the 30b KDZ flash either so thankfully I did have a backup of my previous 20h Oreo install. Of course, because it's all pooched now that is effectively useless because of course of the encryption and upon restoring the backup it won't boot because of the password crap and forces me to format DATA and start all over again.
/me hates encryption when this BS happens, seriously...
So, any tips or tricks that might get me back to a working connection with Download Mode? Flashing a particular partition or something? I'm basically about to redo it with a clean 20h TWRP flashable here in a bit, not left with many other options now.
Anything is appreciated, thanks...
1) Try flashing US998 20e TWRP-FLASHABLE zip. See if that gets you download mode back.
If not, then
2) Try different LGUP.
______
After you get Download mode back, try these steps. Helpful people been testing this out...
For users with TWRP who get stuck on LG logo.
* Flash Verizon VS996 Nougat Partition DL -- EXCEPT for Recovery partitions, to keep TWRP. Do NOT choose all partitions!
You will probably lose download mode, but you've prepped your phone, corrected any partitions. (This is not just for Verizon users, this is for all North American variants -- except for T-Mobile H932.)
* Flash US99820e TWRP flashable zip to get back Download mode.
* Then REFURBISH to US998 20h KDZ.
* Now flash TWRP recovery again and then flash John's zip US99830b.
"Phone booted immediately on pie and everything is working great."
---------- Post added at 01:01 AM ---------- Previous post was at 12:58 AM ----------
rmgibbs1861 said:
ATT 931 on US998. Hangs on the LG Logo for PIE. Will there. be another release for US998 Pie? I do miss Anxious!
Click to expand...
Click to collapse
See Instructions above. Going to write something up in the US998 thread.
Yah, the 20e thing got download mode working normally meaning when the device went into that mode I'd get the traditional notification from Windows that a USB device was now attached - that's what was missing previously for whatever reason.
So I flashed 20h clean with the dev patched LGUP, no issues with Partition DL because I wanted it truly clean without anything that shouldn't be there, and that meant the factory recovery partition as well.
Then I attempted to flash the 30b KDZ, no joy, just stuck at the LG logo and I've wasted enough time on this now so, I'll just wait till some other point and maybe give it a shot in the near future.
Kinda sucks starting over totally clean but hey, this phone has worked near-perfectly since I got it in May so it'll be fine with a clean fresh start. I'm not even going to install Magisk this time, I can't think of a single reason I even need root anymore but if I do I'll worry about that a later time.
br0adband said:
Yah, the 20e thing got download mode working normally meaning when the device went into that mode I'd get the traditional notification from Windows that a USB device was now attached - that's what was missing previously for whatever reason.
So I flashed 20h clean with the dev patched LGUP, no issues with Partition DL because I wanted it truly clean without anything that shouldn't be there, and that meant the factory recovery partition as well.
Then I attempted to flash the 30b KDZ, no joy, just stuck at the LG logo and I've wasted enough time on this now so, I'll just wait till some other point and maybe give it a shot in the near future.
Kinda sucks starting over totally clean but hey, this phone has worked near-perfectly since I got it in May so it'll be fine with a clean fresh start. I'm not even going to install Magisk this time, I can't think of a single reason I even need root anymore but if I do I'll worry about that a later time.
Click to expand...
Click to collapse
You need to do the VS996 Nougat Partition DL step. It preps the phone.
This is what you need to do:
I have all the steps above. The first 20e flash was just to get Download mode back.
ChazzMatt said:
After you get Download mode back, try these steps. Helpful people been testing this out...
For users with TWRP who get stuck on LG logo.
* Flash Verizon VS996 Nougat Partition DL -- EXCEPT for Recovery partitions, to keep TWRP. Do NOT choose all partitions!
You will probably lose download mode, but you've prepped your phone, corrected any partitions. (This is not just for Verizon users, this is for all North American variants -- except for T-Mobile H932.)
* Flash US99820e TWRP flashable zip to get back Download mode.
* Then REFURBISH to US998 20h KDZ.
* Now flash TWRP recovery again and then flash John's zip US99830b.
"Phone booted immediately on pie and everything is working great."
Click to expand...
Click to collapse
Let me start firstly by saying, thank you ChazzMatt! V30 owners around the globe are incredibly fortunate to have your dedicated write-ups and support for these terrific phones. FWIW, I'm seriously impressed with the level of knowledge and your willingness to deep dive issues with folks... thanks again!
Getting to the topic however; I have the identical issue occurring with my LS998U (V30+) that I just went through the unlock process with yesterday. This morning I TWRP flashed the VS99630c ROM and everything worked A-OK except download mode. Exact same symptoms as br0adband is describing - phone appears to enter download mode as normal (though the initial "LG V30 ThinQ" boot screen appears to have replaced the bootloader warning screen?) but is not initiating the USB port for a connection at all.
Connections are established and work normally in TWRP and when booted into the OS so there appears to be something fundamentally wrong with Pie or the flash method.
I'm 99% confident it's not a PC side issue as there isn't even a connection for LGUP or drivers to fault out on.. I also tried my other US998 phone which is on dotOS and everything worked normally.
I'm about to try the TWRP flashable 20e per ChazzMatt's suggestion and will report back if I have success (or not).
Windza said:
Let me start firstly by saying, thank you ChazzMatt! V30 owners around the globe are incredibly fortunate to have your dedicated write-ups and support for these terrific phones. FWIW, I'm seriously impressed with the level of knowledge and your willingness to deep dive issues with folks... thanks again!
Click to expand...
Click to collapse
You're welcome!
Windza said:
This morning I TWRP flashed the VS99630c ROM and everything worked A-OK except download mode. Exact same symptoms as br0adband is describing - phone appears to enter download mode as normal (though the initial "LG V30 ThinQ" boot screen appears to have replaced the bootloader warning screen?) bu
I'm about to try the TWRP flashable 20e per ChazzMatt's suggestion and will report back if I have success (or not).
Click to expand...
Click to collapse
VS996 firmware doesn't have bootloader unlocked warning. Verizon never thought it would ever be unlocked.
While flashing 20e should give you download mode back, to me or seems both of you are sort of missing the point of the preliminary VS996 Nougat Partition DL flash (while omitting the Recovery partitions to keep TWRP)
Maybe in your case you don't need it -- since you made it to the other side of Pie, but that Nougat flash fixes any Partition problems. Just be sure to keep TWRP during that.
You may temporarily lose download mode again
Then TWRP-flashable zip US998 20e fix that.
Then REFURBISH to US998 20h. You'll temporarily lose TWRP at that point.
Re-Install TWRP and the three root files.
Then flash US998 30b TWRP-flashable zip.
ChazzMatt said:
While flashing 20e should give you download mode back, to me or seems both of you are sort of missing the point of the preliminary VS996 Nougat Partition DL flash (while omitting the Recovery partitions to keep TWRP)
Click to expand...
Click to collapse
While my "missing the point" is entirely possible ChazzMatt, I was under the impression that I was already AT the preliminary Nougat step after having just stepped through the Frankenstein and unlock methods?
My progression through those steps was simply;
Frankenstein per your post here; https://forum.xda-developers.com/lg...ssflashing-t3780969/post76510671#post76510671
Unlock the bootloader, install TWRP et. al. per your directions here ;https://forum.xda-developers.com/showpost.php?p=76584629&postcount=193
Upon completing these steps, Nougat is already installed at which point I figured I was ready to flash VS99630c. What am I missing here... should I have reflashed Nougat?
I didn't have any issues like others are reporting with the upgrade to 30c (TWRP flashed it flawlessly and it booted right up).
It wasn't until I decided I'm not ready for Verizon Pie (tastes gross) and went to step back to US99820h that I realised Download Mode was broken.
Is all of this not just a case of Download Mode being broken in 30c for everyone?
ChazzMatt said:
Then TWRP-flashable zip US998 20e fix that.
.
Click to expand...
Click to collapse
Yup - just as you said. 20e restored Download Mode.
ChazzMatt said:
Then flash US998 30b TWRP-flashable zip.
Click to expand...
Click to collapse
Does Download Mode work for anyone after this step or is TWRP back to a 20 series ROM the only way back to a working LGUP?
Sorry if I'm only confusing things more but I figure I'm not the only one tripping up on this... once I understand it better, I promise I'll step in and help educate other folk
It really is true about ChazzMatt's willingness to help around here.
What I never could understand is why some users, after receiving help AND successfully using it to fix their phones, don't even bother saying thank you. I'll happily spend my daily Thanks quota on helpful posts, even if they have no relevance for me at all. And I see Chazz do the same, every day. Others too, of course. But it seems some people feel being thankful is beneath them. Or something... I just don't understand it.
</rant>
Windza said:
While my "missing the point" is entirely possible ChazzMatt, I was under the impression that I was already AT the preliminary Nougat step after having just stepped through the Frankenstein and unlock methods?
My progression through those steps was simply;
Frankenstein per your post here; https://forum.xda-developers.com/lg...ssflashing-t3780969/post76510671#post76510671
Unlock the bootloader, install TWRP et. al. per your directions here ;https://forum.xda-developers.com/showpost.php?p=76584629&postcount=193
Upon completing these steps, Nougat is already installed at which point I figured I was ready to flash VS99630c. What am I missing here... should I have reflashed Nougat?
I didn't have any issues like others are reporting with the upgrade to 30c (TWRP flashed it flawlessly and it booted right up).
It wasn't until I decided I'm not ready for Verizon Pie (tastes gross) and went to step back to US99820h that I realised Download Mode was broken.
Is all of this not just a case of Download Mode being broken in 30c for everyone?
Click to expand...
Click to collapse
No, download mode isn't broken for everyone. Most people flash to Pie with no issues and download mode still works. It's when reverting to US998 Download mode seems to go away for a number of poeple (not sure how many and may depend on the LGUP used)
_______
OK, if all you wanted was for Download mode to be restored and you had no problems getting to Pie before that, then ignore what I said.
I thought you were trying to get to Pie and couldn't. In that case the workaround involves flashing Verizon VS996 Nougat -- NOT US998 Nougat like in Frankenstein -- via Partition DL mode except for Recovery partitions. That's a necessary prep stage for Pie. Both people in this thread weren't doing that. OK, so you had good reason. :silly:
THEN going to US998 20e via TWRP flashable zip, which restores Download mode. But if the goal was to get to Pie (yours wasn't) flashing 20e to get Download mode was also step zero. It was also necessary to restore Download mode so you could then flash VS996 Nougat via Partition DL mode (except for Recovery), to then flash back US998 20e TWRP flashable zip AGAIN, to then REFURBISH to US998 20h.
The VS996 Nougat part is important for those people hitting the LG logo wall.
ChazzMatt said:
No, download mode isn't broken for everyone. Most people flash to Pie with no issues and download mode still works. It's when reverting to US998 Download mode seems to go away for a number of poeple (not sure how many and may depend on the LGUP used)
Click to expand...
Click to collapse
This is good news... thanks for confirming!
I've likely done a few hundred ROM flashes and plenty of roots/unlocks in the past 15-20yrs and this was the first time I had a genuine "Oh crap" moment where a low level mode like Download Mode truly failed.
I was also having trouble getting back into TWRP (Noxx PM refused to work on 30c) which fostered a rapidly growing concern that without TWRP and Download Mode, I was effectively bricked (or at least in for a few hours of work to find a resolution).
I breathed a sigh of relief when attempting a Master Reset led me back to TWRP... I still had options!
Anyhow, it's probably fitting for me to exit this thread on the same subject I entered on by saying thank you again for the information share and willingness to help out :good:
Cheers!
ChazzMatt said:
No, download mode isn't broken for everyone. Most people flash to Pie with no issues and download mode still works. It's when reverting to US998 Download mode seems to go away for a number of poeple (not sure how many and may depend on the LGUP used)
_______
OK, if all you wanted was for Download mode to be restored and you had no problems getting to Pie before that, then ignore what I said.
I thought you were trying to get to Pie and couldn't. In that case the workaround involves flashing Verizon VS996 Nougat -- NOT US998 Nougat like in Frankenstein -- via Partition DL mode except for Recovery partitions. That's a necessary prep stage for Pie. Both people in this thread weren't doing that. OK, so you had good reason. :silly:
THEN going to US998 20e via TWRP flashable zip, which restores Download mode. But if the goal was to get to Pie (yours wasn't) flashing 20e to get Download mode was also step zero. It was also necessary to restore Download mode so you could then flash VS996 Nougat via Partition DL mode (except for Recovery), to then flash back US998 20e TWRP flashable zip AGAIN, to then REFURBISH to US998 20h.
The VS996 Nougat part is important for those people hitting the LG logo wall.
Click to expand...
Click to collapse
I lost download mode and TWRP for some reason and all I have is system recovery and nothing works in it for me . Is there anything I can do now? All I see is MTP android device.
KDZ 99820a
Hello i wanna thank all of you guys for the amazing support on this device, he LG v30 is an amazing phone just bought a US99830B , downgraded it with LGUP to oreo, unlocked bootloader in oreo and installed TWRP downloaded 99830B flasheable zip and flashed it , then i waned to try lineage 17 and flashed it in TWRP clean install booted up in android 10 but noticed lots of bugs and no WIFI, flashed modem for oreo in TWRP wifi came back up but wanted to go back to PIE restored from a backup that performed for PIE and got botloop maybe because of the incompatible modem, tried download mode, no USB activity back to TWRP restored lineage OS and im back in the system, i took your advice to flash 99820b in TWRP my download mode is back and im on oreo, my question is if i KDZ 99830B from 99820b will download mode still work even tho it doesn't when i flash stock 99830b download mode gets lost, i dont want to flash the KDZ and end up with no download mode and no TWRP and have a hard brick
Update : I have KDZ 99820a using LGUP and locked bootloader I'm back to stock is there any issues if I update to the 99830b which is the original software that the phone came with? Can I perform that update via KDZ?
SOU55 said:
Hello i wanna thank all of you guys for the amazing support on this device, he LG v30 is an amazing phone just bought a US99830B , downgraded it with LGUP to oreo, unlocked bootloader in oreo and installed TWRP downloaded 99830B flasheable zip and flashed it , then i waned to try lineage 17 and flashed it in TWRP clean install booted up in android 10 but noticed lots of bugs and no WIFI, flashed modem for oreo in TWRP wifi came back up but wanted to go back to PIE restored from a backup that performed for PIE and got botloop maybe because of the incompatible modem, tried download mode, no USB activity back to TWRP restored lineage OS and im back in the system, i took your advice to flash 99820b in TWRP my download mode is back and im on oreo, my question is if i KDZ 99830B from 99820b will download mode still work even tho it doesn't when i flash stock 99830b download mode gets lost, i dont want to flash the KDZ and end up with no download mode and no TWRP and have a hard brick
Update : I have KDZ 99820a using LGUP and locked bootloader I'm back to stock is there any issues if I update to the 99830b which is the original software that the phone came with? Can I perform that update via KDZ?
Click to expand...
Click to collapse
Losing your download mode has nothing to do with stock.
Why did you lock your bootloader back? You can run stock rooted firmware just fine and have lots of advantages like DTS surround sound stereo.
I don't understand why people lock the bootloader back just because they decide they don't want custom ROMs. The best thing to do is run rooted stock firmware, have everything you want.
ChazzMatt said:
Losing your download nose has nothing to do with stock.
Why did you lock your bootloader back? You can run stock rooted firmware just fine and have lots of advantages like DTS surround sound stereo.
I don't understand why people lock the bootloader back just because they hate custom ROMs. The best thing to do is run rooted stock firmware, have everything you want.
Click to expand...
Click to collapse
Don't get me wrong i like having rooted devices because of the endless possibilities it offers but this time mayor newer games that are coming out they have the ability to detect if you are rooted or if your bootloader has been unlocked and they kick you out of their servers, that's the main reason why i want to go full stock, and I was so afraid to do so because some people are reporting when moving from oreo to pie it creates bootloop and since I had issues when I was rooted and flashed via twrp 99830.zip download mode won't detect the USB cable only when I rolled back with LGUP to oreo downloadode started working and I KDZ oreo to have official recovery and relocked bootloader but I want pie is just I am not sure if I can go up with LGUP to pie using 99830b (which my phone originally came with pie) from 99820b
Could you please help me with the same problem with download mode on h932? I'm on stock pie now. I want to downgrade to nought but my PC not recognize phone in download mode. Thank you.
Or_dos said:
Could you please help me with the same problem with download mode on h932? I'm on stock pie now. I want to downgrade to nought but my PC not recognize phone in download mode. Thank you.
Click to expand...
Click to collapse
First try a different USB port, different cable and/or different computer. If you never rooted the phone, there is very little chance that your actual Download Mode got corrupted, and one of the above will most likely solve it (although many doubt it because it sounds too trivial).
Also, make sure you're using the latest Dual Mode Dev patched LGUP from one of ChazzMatt's ROM threads.
Next I would try the Update Recovery mode in LG Bridge (on the Update tab).
Finally, if none of those work, you can try force installing the Pie OTA using LGUP FOTA mode (doesn't require Download Mode). It's described in the thread linked below. Best to read the whole thread for context, it's just a few pages.
[H932][T-MOBILE] URL for the H932 Pie OTA file
https://forum.xda-developers.com/lg-v30/help/h932-url-h932-pie-ota-file-t3991417
Hopefully one of those will work for you. Please report your results, regardless of outcome.
Good luck to you :fingers-crossed:
TheDannemand said:
First try a different USB port, different cable and/or different computer. If you never rooted the phone, there is very little chance that your actual Download Mode got corrupted, and one of the above will most likely solve it (although many doubt it because it sounds too trivial).
Also, make sure you're using the latest Dual Mode Dev patched LGUP from one of ChazzMatt's ROM threads.
Next I would try the Update Recovery mode in LG Bridge (on the Update tab).
Finally, if none of those work, you can try force installing the Pie OTA using LGUP FOTA mode (doesn't require Download Mode). It's described in the thread linked below. Best to read the whole thread for context, it's just a few pages.
[H932][T-MOBILE] URL for the H932 Pie OTA file
https://forum.xda-developers.com/lg-v30/help/h932-url-h932-pie-ota-file-t3991417
Hopefully one of those will work for you. Please report your results, regardless of outcome.
Good luck to you :fingers-crossed:
Click to expand...
Click to collapse
I tried all things with cabels, PCs and drivers, i'm not sure but as i know LG phone in download mode should be recognized as anything, but in my case i have no any devices in the device manager. I didn't root this phone but i bought it with unlocked bootloader so it is possible that it was rooted. I tried lock bootloader but it didn't helps so i unlocked it again. Now i'm going to try to flash OTA file. Thank you so much for help.
Or_dos said:
I tried all things with cabels, PCs and drivers, i'm not sure but as i know LG phone in download mode should be recognized as anything, but in my case i have no any devices in the device manager. I didn't root this phone but i bought it with unlocked bootloader so it is possible that it was rooted. I tried lock bootloader but it didn't helps so i unlocked it again. Now i'm going to try to flash OTA file. Thank you so much for help.
Click to expand...
Click to collapse
Does Download Mode start on the phone?
Just to make sure: From Power off, press and hold VolUp while plugging in the cable. Then load LGUP. Again make sure you're using the Pie compatible LGUP from one of ChazzMatt's ROM threads.
Otherwise I'd try LG Bridge next.
As for force installing the Pie update with LGUP FOTA (the thread I linked) we've only had one confirmed case of it fixing Download Mode so far, although not many tried it yet. On Oreo we had many users confirming it, but Pie is different.
I should add that if you have working Pie, but just would like to roll back, there is a risk that the FOTA will mess up what you have. So if it doesn't fix your Download Mode, you could be worse of. Just a heads-up
TheDannemand said:
Does Download Mode start on the phone?
Just to make sure: From Power off, press and hold VolUp while plugging in the cable. Then load LGUP. Again make sure you're using the Pie compatible LGUP from one of ChazzMatt's ROM threads.
Otherwise I'd try LG Bridge next.
As for force installing the Pie update with LGUP FOTA (the thread I linked) we've only had one confirmed case of it fixing Download Mode so far, although not many tried it yet. On Oreo we had many users confirming it, but Pie is different.
I should add that if you have working Pie, but just would like to roll back, there is a risk that the FOTA will mess up what you have. So if it doesn't fix your Download Mode, you could be worse of. Just a heads-up
Click to expand...
Click to collapse
Actually the main problem is that phone doesn't recognize by PC when download mode is on the screen. I have tried to use lg bridge to recover, but anyway it reboots my phone and then my phone doesn't recognize. Now i'm trying to solve lg up error with FOTA update, it looks like wrong dll file. I'll keep you up to date.
Thank you!
Or_dos said:
Actually the main problem is that phone doesn't recognize by PC when download mode is on the screen. I have tried to use lg bridge to recover, but anyway it reboots my phone and then my phone doesn't recognize. Now i'm trying to solve lg up error with FOTA update, it looks like wrong dll file. I'll keep you up to date.
Thank you!
Click to expand...
Click to collapse
Got it! Thank you for the update.
Completely uninstall LGUP and remove all folders of it. Then install the Dual Mode LGUP from ChazzMatt's H932 ROM thread linked below, using his exact installation steps. That's important: LGUP isn't just LGUP!
[H932][STOCK][PIE]LG V30 U.S. T-Mobile H932 H93230d_00_0902.KDZ
https://forum.xda-developers.com/lg-v30/development/h932-lg-v30-s-t-mobile-h932-t3952258

Frankenstein(ing) us998 to vs998

I want to know if frankensteining a carrier unlocked us998 to vs99(Verizon version) is just a quick one step process to latest Pie, or do I need to install all updates one by one? The us998 is activated on Verizon and has Android 7.0 on it. Thanks.
charulo316 said:
tried all. After a few restarts, now get a "DLL for us99810b is invalid. Please install valid DLL package (*.msi) for the model". I've uninstalled and reinstalled a few times, deleted the folder, moved cable around, tried new cable. This is the furthest i've gotten now.
Click to expand...
Click to collapse
One of the trouble shooting tips in the Frankenstein post is to reinstall drivers, another is to try a different computer.
The dll error ALWAYS means either you didn't install the correct version of the Dev Patched LGUP or not using it correctly (like not launching from desktop shortcut, but instead trying to use the folder .exe file). If you are sure you have installed correct, have installed all the correct drivers, then try a different computer.
Thanks for reply. I've tried all steps from the post. Reinstalled, deleted, restarted. Only thing I haven't done is try a different computer. I get "LGUP can't load the model[c:\Program Files\LG Electronics\LGUP\model\com" error. Am i missing a file?
I noticed that the program also installs onto my C:. I also have to delete c:\LG Electronics folder. Is this normal? I've downloaded LGUP Dual from both links in the post. I guess i'll try a different PC. Thanks for your help.
I got it to recognize! Had to try on another computer but now it works. One more question though. Do I need to make a backup? If for some unknown reason I need to get back to the original software, how do I go about doing that? I have us998 with us99810b installed with Android 7.1.2. Thanks again.
charulo316 said:
I got it to recognize! Had to try on another computer but now it works.
Click to expand...
Click to collapse
That's why that tip is listed in the Trouble Shooting tips.
charulo316 said:
I got it to recognize! Had to try on another computer but now it works. One more question though. Do I need to make a backup? If for some unknown reason I need to get back to the original software, how do I go about doing that? I have us998 with us99810b installed with Android 7.1.2. Thanks again.
Click to expand...
Click to collapse
You would simply do the reverse. You would flash your phone back to US998 KDZ. However, US998 10b was very early Nougat. If you ever go back to US998, like to sell the phone or something, I would at least flash to newer US998 firmware -- like 20h (last Oreo).
charulo316 said:
I want to know if frankensteining a carrier unlocked us998 to vs99(Verizon version) is just a quick one step process to latest Pie, or do I need to install all updates one by one? The us998 is activated on Verizon and has Android 7.0 on it. Thanks.
Click to expand...
Click to collapse
Actually it's VS996, for the Verizon V30, not VS9998.
So you're on US998 Nougat?
Technically for Frankenstein, using Dev Patched LGUP you should Partition DL to VS996 Nougat, use Master Reset, then Refurbish to VS996 Pie.
However, US998 and VS996 have a level of compatibility the others don't enjoy. I think you can Partition DL straight to VS996 Pie, followed by Master Reset.
If you're not sure what Master Reset is (sequence of button), see the Frankenstein instructions.
ChazzMatt said:
Actually it's VS996, for the Verizon V30, not VS9998.
So you're on US998 Nougat?
Technically for Frankenstein, using Dev Patched LGUP you should Partition DL to VS996 Nougat, use Master Reset, then Refurbish to VS996 Pie.
However, US998 and VS996 have a level of compatibility the others don't enjoy. I think you can Partition DL straight to VS996 Pie, followed by Master Reset.
If you're not sure what Master Reset is (sequence of button), see the Frankenstein instructions.
Click to expand...
Click to collapse
Thanks for the reply. Do you recommend going straight to Pie? If its more reliable in steps ex. Nougat, Oreo, Pie, then ill do it. I was just wondering if jumping straight to Pie would cause issues.
charulo316 said:
Thanks for the reply. Do you recommend going straight to Pie? If its more reliable in steps ex. Nougat, Oreo, Pie, then ill do it. I was just wondering if jumping straight to Pie would cause issues.
Click to expand...
Click to collapse
No, won't cause issues if you're using the KDZ.
____
You're not Bootloader Unlocked and rooted, are you? You don't care about that? It's fine if you don't. Neither is my wife's, sister's nor brother-in-law's V30/V30+.
BUT if that is something you would want, no, you can't go straight to VS996 Pie until you do some other stuff.
But if you just want Verizon firmware, then you should be able to jump straight to VS996 Pie from US998 Nougat, going by what other Verizon users have done. Use Dev Patched LGUP in Partition DL mode, with all Partitions. Then Master Reset.
If for some reason, doesn't work, then tour would need to flash VS996 Nougat, Master Reset, then VS996 Pie.
At the most, all you would need
Thanks for the reply. I'm having difficulty getting LGUP to run. I get a 'LGUP can't load the model' I got the file from download LG dualmode. Any suggestions? I'm just trying to load Verizon stock on here, no root. Thanks.
ChazzMatt said:
No, won't cause issues if you're using the KDZ.
Thanks for the reply, I'm having a hard time installing LGUP dev tool. I get an' LGUP can't load the model' error. Any suggestions? Just trying to load Verizon stock on here. No root if possible.
____
You're not Bootloader Unlocked and rooted, are you? You don't care about that? It's fine if you don't. Neither is my wife's, sister's nor brother-in-law's V30/V30+.
BUT if that is something you would want, no, you can't go straight to VS996 Pie until you do some other stuff.
But if you just want Verizon firmware, then you should be able to jump straight to VS996 Pie from US998 Nougat, going by what other Verizon users have done. Use Dev Patched LGUP in Partition DL mode, with all Partitions. Then Master Reset.
If for some reason, doesn't work, then tour would need to flash VS996 Nougat, Master Reset, then VS996 Pie.
At the most, all you would need
Click to expand...
Click to collapse
I'm wondering the same as charulo316, but my v30+ is already running pie, but for the unlocked and I want to switch to the Verizon one, do I need to downgrade to Oreo and then back the the Verizon pie version??
Wolfpack81 said:
I'm wondering the same as charulo316, but my v30+ is already running pie, but for the unlocked and I want to switch to the Verizon one, do I need to downgrade to Oreo and then back the the Verizon pie version??
Click to expand...
Click to collapse
Read my previous answer:
ChazzMatt said:
Technically for Frankenstein, using Dev Patched LGUP you should Partition DL to VS996 Nougat, use Master Reset, then Refurbish to VS996 Pie.
However, US998 and VS996 have a level of compatibility the others don't enjoy. I think you can Partition DL straight to VS996 Pie, followed by Master Reset.
If you're not sure what Master Reset is (sequence of button), see the Frankenstein instructions.
Click to expand...
Click to collapse
You are basically asking about Frankenstein, where one North American variant can be fully converted to another (firmware, modem with LTE bands, etc)
Normally, for most North American variants, when flashing KDZ (LG stock firmware image) you actually need to downgrade all the way to Nougat first before upgrading to more current firmware. See Frankenstein instructions.
But US998/VS996 have a very close relationship. If have US998 firmware on the phone, you can go straight to Verizon VS996 Pie firmware using Dev Patched LGUP. For this specific combination you do not need to downgrade first.
ChazzMatt said:
You are basically asking about Frankenstein, where one North American variant can be fully converted to another (firmware, modem with LTE bands, etc)
Normally, for most North American variants, when flashing KDZ (LG stock firmware image) you actually need to downgrade all the way to Nougat first before upgrading to more current firmware. See Frankenstein instructions.
But US998/VS996 have a very close relationship. If have US998 firmware on the phone, you can go straight to Verizon VS996 Pie firmware using Dev Patched LGUP. For this specific combination you do not need to downgrade first.
Click to expand...
Click to collapse
Thank you!! I did some more searching around the site late last night and am going to try it tonight. The main reason is because i just switched to Verizon and the WIFI calling option disappeared even though it was "turned" through Verizon. It seems to be that even though I have a carrier unlocked phone, Verizon doesn't see that and will block certain features unless it is a Verizon phone. I have access to the network, but not the wifi calling
So I'm still having issues. I've downloaded and installed drivers and LGUP Dual mode from the link and can't seem to get it to work. I get the phone into download mode and it goes into the firmware upgrade screen but my LGUP doesn't load. I get a "LGUP can't load the model[c:\Program Files\Lg Electronics\LGUP\model\com" error. Any suggestions?
Just trying to install VS996 onto a Verizon enabled us998 so that i can get wifi calling, visual voicemail and video calling to work. Thanks
charulo316 said:
So I'm still having issues. I've downloaded and installed drivers and LGUP Dual mode from the link and can't seem to get it to work. I get the phone into download mode and it goes into the firmware upgrade screen but my LGUP doesn't load. I get a "LGUP can't load the model[c:\Program Files\Lg Electronics\LGUP\model\com" error. Any suggestions?
Just trying to install VS996 onto a Verizon enabled us998 so that i can get wifi calling, visual voicemail and video calling to work. Thanks
Click to expand...
Click to collapse
See the trouble shooting tips in the Frankenstein Instructions. How many of those have you tried?
Sounds like LGUP wasn't installed correctly. It needs to be installed using very specific steps. There are other possible explanations, but this is where I would start.
Uninstall LGUP completely (in Programs & Features control panel), then delete all its remnants and folders and restart Windows (not Shutdown, Restart).
Now download LGUP from the link in one of ChazzMatt's Pie KDZ ROM threads, and install it EXACTLY folding the steps he gives, no shortcuts or deviations.
If it still doesn't work, follow his troubleshooting steps in the same ROM thread.
Edit: Oops, Chazz beat me to it.
tried all. After a few restarts, now get a "DLL for us99810b is invalid. Please install valid DLL package (*.msi) for the model". I've uninstalled and reinstalled a few times, deleted the folder, moved cable around, tried new cable. This is the furthest i've gotten now.

Cant boot to download mode. just goes straight to fastboot and no adb detection.

pressing the vol - before plugging in, it would show "download mode" for a spit second and go straight to fastboot mode. i cant do anything in fastboot mode since i cant get it to show on "adb devices".
i was just starting to root this V300L30p and managed to flash the h930 to unlock the bootloader. after flashing the unlock bin i waited and held the vol - button as said in the guide but the phone never boot up. i waited 30 mins or so. i tried to get to download mode and reflashed the h930 rom using dual mode LGUP partition dl but it didnt work and i just got "cant open port" i tried refurbish and it also didnt work. i tried master reset and it didnt work in trying to reflash. after a while i just couldnt access the download mode and it just goes too fast to fastboot mode.
electrical potato said:
pressing the vol - before plugging in, it would show "download mode" for a spit second and go straight to fastboot mode. i cant do anything in fastboot mode since i cant get it to show on "adb devices".
i was just starting to root this V300L30p and managed to flash the h930 to unlock the bootloader. after flashing the unlock bin i waited and held the vol - button as said in the guide but the phone never boot up. i waited 30 mins or so. i tried to get to download mode and reflashed the h930 rom using dual mode LGUP partition dl but it didnt work and i just got "cant open port" i tried refurbish and it also didnt work. i tried master reset and it didnt work in trying to reflash. after a while i just couldnt access the download mode and it just goes too fast to fastboot mode.
Click to expand...
Click to collapse
In fastboot mode, is your Bootloader unlocked?
Can you run the getvar command?
What H930 KDZ did you flash? The right one?
ChazzMatt said:
In fastboot mode, is your Bootloader unlocked?
Can you run the getvar command?
What H930 KDZ did you flash? The right one?
Click to expand...
Click to collapse
just ran get var all command. it says "unlocked_count 1" and "unlocked: yes"
i used H93020d_00_OPEN_EU_OP_0326.kdz when it was available in the first post.
edit: also ran fastboot devices, it showed : ???????????? fastboot
edit 2: ran fastboot devices again and phone turned off. did it again and got : LGH930d794576b fastboot
electrical potato said:
just ran get var all command. it says "unlocked_count 1" and "unlocked: yes"
i used H93020d_00_OPEN_EU_OP_0326.kdz when it was available in the first post.
edit: also ran fastboot devices, it showed : ???????????? fastboot
Click to expand...
Click to collapse
OK if your Bootloader is unlocked and you have fastboot, then you don't need Download mode right now.
Install TWRP, root. Follow Section 6 of the WTF instructions.
Later after you restore modem you can worry about Download mode.
ChazzMatt said:
OK then you don't need Download mode right now.
Install TWRP, root. Follow Section 6 of the WTF instructions.
Click to expand...
Click to collapse
thanks man. really eased me up in there.
ChazzMatt said:
OK if your Bootloader is unlocked and you have fastboot, then you don't need Download mode right now.
Install TWRP, root. Follow Section 6 of the WTF instructions.
Later after you restore modem you can worry about Download mode.
Click to expand...
Click to collapse
it says that "Requested download size is more than max allowed"
electrical potato said:
it says that "Requested download size is more than max allowed"
Click to expand...
Click to collapse
See the Section 7 Trouble Shooting Tips.
You're using the TWRP listedto WTF post, right?
ChazzMatt said:
See the Section 7 Trouble Shooting Tips.
You're using the TWRP listedto WTF post, right?
Click to expand...
Click to collapse
tried it on my laptop and it works perfectly
electrical potato said:
tried it on my laptop and it works perfectly
Click to expand...
Click to collapse
That is one of the Trouble Shooting Tips... Try different computer.
Welcome to the Root Club!
ChazzMatt said:
That is one of the Trouble Shooting Tips... Try different computer.
Welcome to the Root Club!
Click to expand...
Click to collapse
another problem arose. now in TWRP. wipe to format data, typed yes, and it returns with red text "failed to mount /system (unknown error 150)". same happens when i try to do a backup.
should i go to advanced wipe and change the file system of /system to others and then back to ext4?
edit: fixed by selecting ext4 in change file system. /system was showing 0mb, after redoing the file system it is now 14mb and able to be backed up
I have problem with lg v30.
It is v30 VS996 (maybe). but it was flashed US998 Pie. And now it has an error on camera and fingerprint.
I can not enter download mode to flash stock rom and bootloader is locked.
Please, tell me what should i do.
Thank you.
CuDem said:
I have problem with lg v30.
It is v30 VS996 (maybe). but it was flashed US998 Pie. And now it has an error on camera and fingerprint.
I can not enter download mode to flash stock rom and bootloader is locked.
Please, tell me what should i do.
Click to expand...
Click to collapse
Try a regular Factory Data Reset from the Settings menu, if you haven't already. If the bootloader is locked and the phone never rooted (which it sounds like) it is unlikely that the actual ROM was corrupted - though or course not impossible.
What happens when you try to enter Download mode?
I tried to reset factory in setting and it had no effect. With reset data on recovery, it showed error message.
When i enter the download mode, it show 5 dots.
I have no idea to solve this issue
CuDem said:
I tried to reset factory in setting and it had no effect. With reset data on recovery, it showed error message.
When i enter the download mode, it show 5 dots.
I have no idea to solve this issue
Click to expand...
Click to collapse
Are you saying you have TWRP (custom recovery) on your phone? With BL locked?
Factory Reset from Settings menu only works with stock recovery, and goes deeper than TWRP wipe.
If you have TWRP, you can use that to re-flash your ROM (as ZIP) and/or to re-flash laf (Download Mode, either as ZIP or as image).
Otherwise it sounds like Download Mode is there, but LGUP isn't picking it up correctly. I suggest starting over with LGUP. People often have the wrong version, since so many are floating around: Uninstall it completely, delete its folders, possibly uninstall USB driver as well. Restart Windows. Now install drivers and LGUP from scratch using the exact versions and installation steps from ChazzMatt's Pie ROM thread linked below:
[US998][STOCK][PIE]LG V30 US998 US99830b_00_0902.KDZ
https://forum.xda-developers.com/lg-v30/development/us998-lg-v30-us998-us99830a000704-kdz-t3952256
If that still doesn't do it, then try different USB port, different cable, even different computer. Some computers are not compatible with LGUP.
TheDannemand said:
Are you saying you have TWRP (custom recovery) on your phone? With BL locked?
Factory Reset from Settings menu only works with stock recovery, and goes deeper than TWRP wipe.
If you have TWRP, you can use that to re-flash your ROM (as ZIP) and/or to re-flash laf (Download Mode, either as ZIP or as image).
Otherwise it sounds like Download Mode is there, but LGUP isn't picking it up correctly. I suggest starting over with LGUP. People often have the wrong version, since so many are floating around: Uninstall it completely, delete its folders, possibly uninstall USB driver as well. Restart Windows. Now install drivers and LGUP from scratch using the exact versions and installation steps from ChazzMatt's Pie ROM thread linked below:
[US998][STOCK][PIE]LG V30 US998 US99830b_00_0902.KDZ
https://forum.xda-developers.com/lg-v30/development/us998-lg-v30-us998-us99830a000704-kdz-t3952256
If that still doesn't do it, then try different USB port, different cable, even different computer. Some computers are not compatible with LGUP.
Click to expand...
Click to collapse
No, my phone bootloader is locked then i can not install TWRP. I tried with your LGuUP you mention above but not successfully.
May i try to flash by fastboot follow this link:
https://androidforums.com/threads/flash-using-fastboot-mode.970254/
thank you
CuDem said:
No, my phone bootloader is locked then i can not install TWRP. I tried with your LGuUP you mention above but not successfully.
May i try to flash by fastboot follow this link:
https://androidforums.com/threads/flash-using-fastboot-mode.970254/
Click to expand...
Click to collapse
Thank you for the update.
I wouldn't recommend that procedure you linked. That post is five years old, for a completely different phone (LG G2), using a KDZ extractor from 2014 which probably doesn't work with today's KDZ files.
I still don't see how your Download Mode could have been damaged on an unrooted phone. I think the problem is most likely your PC or your cable.
But that aside, I say it's time to rip off the bandaid: Unlock the bootloader and put TWRP onto the phone. It's easy on US998. Follow the guide linked below.
(WTF...!) LG V30/V30+/V30S Bootloader Unlock & Root Method (With Clear Instructions)
https://forum.xda-developers.com/showpost.php?p=76584629&postcount=193
LG V30 is one of the most well documented, most rootable, and most supported phones on the planet -- largely thanks to the guy who wrote that guide. So don't look for any other solutions from anywhere else on the internet
TheDannemand said:
(WTF...!) LG V30/V30+/V30S Bootloader Unlock & Root Method (With Clear Instructions)
https://forum.xda-developers.com/showpost.php?p=76584629&postcount=193
LG V30 is one of the most well documented, most rootable, and most supported phones on the planet -- largely thanks to the guy who wrote that guide. So don't look for any other solutions from anywhere else on the internet
Click to expand...
Click to collapse
Thanks for the very kind words. :good:
TheDannemand said:
I still don't see how your Download Mode could have been damaged on an unrooted phone. I think the problem is most likely your PC or your cable.
But that aside, I say it's time to rip off the bandaid: Unlock the bootloader and put TWRP onto the phone.
Click to expand...
Click to collapse
As we discussed elsewhere, however, he would need Download mode to go back to the early Oreo firmware is he wanted to bootloader unlock and root.
There have been reports of other people losing Download mode when updating to US998 Pie -- but those were people using the TWRP flashable zip. The fix was to flash US998 20e (Oreo) TWRP flashable zip and for some reason that restored Download mode. They could then try again to update to US998 Pie if they really wished. I haven't see that reported flashing with KDZ.
The fingerprint and camera issue is also reminiscent of a V30 that was on LOS-17 (which needs a permissive kernel). Even when going back to stock firmware, you still have to run permissive. The fix for THAT problem is to refurbish to Nougat stock firmware and then update back to newer stock firmware (last Oreo which is very stable or Pie which has some issues).
But he can't do that either until he gets Download mode back.
I really don't have any suggestions.
Thank you for pointing that out, @ChazzMatt!
@CuDem: ChazzMatt is completely right. I forgot you have to use Download Mode to roll back to 20b in order to use the WTF bootloader unlock trick. Duh... So that's not a path for you to fix this.
To me it sounds like this phone WAS previously BL unlocked and rooted, and that's where the problems with Download Mode began. Or LOS-17 was installed, causing the Camera and Fingerprint issues mentioned. Maybe the previous owner re-locked the bootloader and sold the phone, pretending it was in better shape than it was?
I can think of the following:
1) If you know the history of the phone and that it was never unlocked or rooted before, then I would still say it is unlikely that its laf partition (which contains Download Mode) was actually corrupted. The phone could still have been Frankensteined incorrectly or "abused" with LGUP, but because of very thorough integrity checking when flashing through Download mode, it would rarely cause you to lose Download mode. So if you KNOW it has never been BL unlocked, I would continue trying on a different computer, with different cables, different USB ports, drivers etc. If fastboot devices returns a serial number, that's a good test that USB drivers and ADB connection is working. But you could still have LGUP issues. Again, some computers (particularly some AMD processors) are simply not compatible with LGUP.
2) See if you can find the OTA update file for US99830b and force update it using LGUP FOTA mode. This works with the phone booted into the OS and MTP (file sharing) turned on. It may not complete the update since you are already on 30b, but it will rewrite laf (Download mode) as its first step. Several H932 owners have done that back in the Oreo days, and a few have done it on Pie. Study the thread linked below for the background and the procedure. But DO NOT use the files shared in that thread, NOR ANY OTHER H932 FILES. You will brick your phone if you flash anything H932 on any other model, or vice versa.
[H932][T-MOBILE] URL for the H932 Pie OTA file
https://forum.xda-developers.com/lg-v30/help/h932-url-h932-pie-ota-file-t3991417
3) Use Qualcomm 9008 mode and the leaked firehose to rewrite the laf partition (or the entire firmware). This is a more complex procedure, which I cannot help you with, but it allows writing almost anything to the phone, and should be compatible with all V30 models EXCEPT H932. See the thread linked below, and be ready for some hard work:
LG V30 Unbrick guide (Qualcomm EDL 9008 Mode, Hardbirck, with no download mode)
https://forum.xda-developers.com/lg-v30/how-to/lg-v30-unbrick-guide-qualcomm-edl-9008-t4048661
4) Contact the XDA member from Moldova who can repair your V30 remotely for a fee. His name always escapes me, but maybe Chazz or others remember. He is also on eBay:
Remote Service Repair Unbrick LG G7 G6 V30 V35 V40 in Qualcomm Mode 9008
https://www.ebay.com/itm/Remote-Ser...794311?hash=item46994ee187:g:gd0AAOSw0qFdJi7a
And that's all I can think of. Once again, please report the outcome back here, as it may help others. Good luck to you
Edit: Oh, and then there is Update Error Recovery on the Update tab in LG Bridge, which has worked for some to fix Download mode. It also runs from inside the OS (at least initially). But I am not sure LG Bridge works with US998, let alone on Frankenstein'ed phones. Still, it's easy, so worth a try.
TheDannemand said:
To me it sounds like this phone WAS previously BL unlocked and rooted, and that's where the problems with Download Mode began. Or LOS-17 was installed, causing the Camera and Fingerprint issues mentioned. Maybe the previous owner re-locked the bootloader and sold the phone, pretending it was in better shape than it was?
Click to expand...
Click to collapse
Running this fastboot command and looking at unlock_count and lock_count can be used to determine if the phone was bootloader unlocked before...
Code:
fastboot getvar all
jptV30 said:
Running this fastboot command and looking at unlock_count and lock_count can be used to determine if the phone was bootloader unlocked before...
Click to expand...
Click to collapse
Oh yeah, right. That's a good idea if you don't know whether the phone has been rooted.

Categories

Resources