[KERNEL]THEBOSS-Zeus🔥[N960F][SimpleLMK][Lightweight][GPU UV-75mv|OC->775Mhz][CPUMod]
Your warranty is now void. I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this kernel before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you. Hard. A lot. From all my HEART​
I decided to share my personal custom kernel. The main reason I started developing this kernel is to balance *performance / battery* and also add features. I believe I have included most of the usually requested features.
This Kernel is based on Eamon [Endurance Kernel] but it have major or extensive changes that cannot be called Endurance at all... From Now On... it is called [THEBOSS-Zeus Kernel]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Intro​
All kind of kernel optimization and speed and battery life… combination of All In One Kernel-AIO! Chosen carefully and precisely… collected and optimized specifically for our beloved Note 9 (N960F/FD) with a touch of love & passion…
Appreciation and Credits-VIP​
Thanks for the help from my friend @tike420 who helped me and motivated me to push N9 kernel development forward.. he was the one who is testing my kernels and also he is the one who wanted to build TWRP with F2FS support but we got into issues.. but he was the one who also guided me for F2FS related source codes and alot of things too!
Also we are the first who brought F2FS to our beloved device Note9 before posting it in XDA Forums.. if we wasn’t here.. no body will ever do it or even think about it due to misconception & misinformation that most developers realizes which is 5 words [It is not worth it] well.. we proved them wrong and other kernel developers got interested and included it into there own kernel too!
So.. We started the spark.. We started the fire! :highfive::fingers-crossed:
Kernel Features:-
Fully Supports F2FS to ./data & ./cache partitions
F2FS Tweaks further improving performance without sacrificing instabilities
Use CONFIG_HZ = 300
- This changes context switching interval from 4ms to 3.33ms
- Pixel used this for years and Google recommends other vendors to do the same for fewer jitters
Disabled vaultkeeper
Disabled bunch of security options that proved through my experience that causes overhead or performance degradation in general usage or operations
Disabled Unnecessary option or features
Undervolted GPU more across all frequencies
Optimized & Cleaned Code [Using my own method]
Improved & Optimized CPU idle power consumption
Removed all kinds of logging , debugging, tracing,etc…
GPU OC up to 775Mhz[Customized Voltage] (Might be unstable if G3D —-ASV value under 4!!)[You Have Been Warned]
GPU decreased minimum frequency to 150Mhz
OC CPU Big to 2.9Ghz and Small to 2Ghz
Customized CPU Buses to reflect real world usage and to decrease power consumption
Customized CPU frequency scaling for more battery life
This kernel made for Gaming on Mind.. so expect higher FPS performance [Depends on your ASV level]
Safety mechanism is not touched
All kind of options that degrade performance is disabled
Complied with the latest GCC Compiler 8.3 [Modded Customized Version Made By Me]
IO & TCP mostly all available & disabled some TCP that doesn’t make sense
Always updated to the latest Linux upstream version
There is soo much more.. I can’t remember…You tell me…
Simple LMK is implemented! We are the first kernel in the history of Note9 to have Simple LMK... lol even S9 !
All other kernel developers couldn't implement Simple LMK for N9 kernels.. and they failed.. miserably too so.. THEBOSS-Zeus kernel coming for rescue and shed the light on Note9 users we did F2FS first kernel compatible in the history of Note9.. and guess what?! we did it again with Simple LMK on Note9
Installation Instructions
Download my kernel through the link... [You will find it under [ASSETS] section
Go into TWRP Recovery and Choose [Install] Note:- TWRP must have F2FS support.. can be found Here
Navigate to were your kernel is located
Choose [Install Image] Option
Choose [Boot] Partition
Install Magisk if you want root [Obviously Duh!]
Updates Frequency
To know how much I update this kernel.. just simply follow me and also I update it through my free time… so… expect some delays! Always check this link for latest stable releases
THEBOSS-Zeus N9 Kernel Download Link
Changlogs
It is written on every single release from this link.. Changlogs
Notes
This kernel is for Oreo Only
I’m not responsible for anything… you should know what you are doing and if you don’t know what you are doing.. then you shouldn’t even root your smartphone on the first place!
Noob questions will be ignored here... join Telegram Group and ask.. we might help you.. everyone have a life..
The commits in the source code is a mess... sorry about that.. but that is how I develop.. I am not using the traditional way like other developers kernel do If you want to use some of my commit..you gotta cherry-pick.. you gotta search for it and earn it.. that is how you learn.... the hard way.. I know
Telegram Support Group:- Telegram Invite Link
Enjoy… :fingers-crossed:
F.A.Q.
Can you add this or that...?
You can suggest kernel features but I won't do it immediately... I have life to live..
How can I root?
If you asked this question.. you shouldn't considering rooting your phone at first place
Please update! When are you gonna update?!
On my free precious time.. don't ask..
XDA:DevDB Information
TB-Zeus, Kernel for the Samsung Galaxy Note 9
Contributors
Da-BOSS, tycoon78[stoner]
Source Code: https://github.com/THEBOSS619/Note9-Zeus-Oreo8.1
Kernel Special Features: GPU OC, GPU UV, F2FS, Custom CPU BUS, Debloated Code
Version Information
Status: Stable
Current Stable Version: 1.3.78
Stable Release Date: 2019-05-17
Created 2019-05-11
Last Updated 2019-05-22
F2FS Tutorial
Notice!! Backup your internal storage and your Data partition
Thanks to @tycoon78[stoner] for this amazing tutorial and for contributing and participating to make this kernel the best on xda :highfive::fingers-crossed:
For people who want to use F2FS tutorial:-
-Go into TWRP and then simply go to Advanced Wipe
-
-Now select [Data]
-Now click on [Repair or Change Filesystem]
-It will now display your filesystem info
-
-Now click on [Change File System] and Choose F2FS
-Do the same procedure for Cache
-After doing it.. reboot to recovery and check if the partition still F2FS or changed back to ext4
-If it shows F2FS... flash the rom you want or stay on the same ROM
-Use this app to check filesystem after you booted to your rom DiskInfo
-
Reserved for future use
i think you double threaded...
also that twrp you linked to, although seems to work, the restore backup dosent work and basically when restoring would bootloop your device.
bober10113 said:
i think you double threaded...
also that twrp you linked to, although seems to work, the restore backup dosent work and basically when restoring would bootloop your device.
Click to expand...
Click to collapse
Xda is really weird..
About TWRP.. I backed up & restored without any issues
Da-BOSS said:
Xda is really weird..
About TWRP.. I backed up & restored without any issues
Click to expand...
Click to collapse
you formatted/ cache too?
i had to completely go back to stock as the partitions formatted to the new file system screwed up something.
in that twrp build odm was also formatted to F2FS and it screwed with my csc and cell reception.
one thing i didint see or hear is what are the advantages of F2FS over the regular ext4?
bober10113 said:
you formatted/ cache too?
i had to completely go back to stock as the partitions formatted to the new file system screwed up something.
in that twrp build odm was also formatted to F2FS and it screwed with my csc and cell reception.
one thing i didint see or hear is what are the advantages of F2FS over the regular ext4?
Click to expand...
Click to collapse
lol.. I'm sure you changed the wrong partition to F2FS maybe F2FS is only used on Data & Cache partition only
About F2FS advantages.. read here..
https://forum.xda-developers.com/poco-f1/development/arter97-kernel-poco-f1-t3919127/post79333071#post79333071
Da-BOSS said:
lol.. I'm sure you changed the wrong partition to F2FS maybe F2FS is only used on Data & Cache partition only
About F2FS advantages.. read here..
https://forum.xda-developers.com/po...el-poco-f1-t3919127/post79333071#post79333071
Click to expand...
Click to collapse
no i didnt forcefully change anything. i just simply resorted the backup. and while looking at the logs, the make f2fs is formatting odm!( twrp dosent alow you to wipe efs or odm, it will wipw/format though when restoring a back up!)
in the old twrp thread other are reporting issues too about boot loop. i got out of it but as i said odm partition was formatted to f2fs and i think EFS too! since reception was on and off...
also i hate to break it to you but 3 days ago @Eamo5:
Eamo5 said:
Endurance Kernel V2.0.16 / V1.2.21
Linux 4.9.174
F2FS support
Click to expand...
Click to collapse
so not the first....
edit also what rom base/ram disk is this kernel compatible with?
Sounds very good! Downloading now to give it a go!
bober10113 said:
no i didnt forcefully change anything. i just simply resorted the backup. and while looking at the logs, the make f2fs is formatting odm!
in the old twrp thread other are reporting issues too about boot loop. i got out of it but as i said odm partition was formatted to f2fs and i think EFS too! since reception was on and off...
also i hate to break it to you but 3 days ago:
so not the first....
Click to expand...
Click to collapse
And I hate to break it to you.. but I am the first one... May 6... 5~6 days ago..
Look at the screen shot.. May 6
We did it first and we motivated other kernel developers to implement it.. Sorry.. your info is outdated mate!
Da-BOSS said:
And I hate to break it to you.. but I am the first one... May 6... 5~6 days ago..
Look at the screen shot.. May 6
Click to expand...
Click to collapse
ok nice! i just understood by your OP comment that you were the 1st poster on XDA. also by looking at the commit dates on gihub of yours vs @Eamo5
anyways regarding the big issues with the new twrp:
https://forum.xda-developers.com/showpost.php?p=79501974&postcount=479
that guy is also reporting issues check at his 1 st restore screen shot:
EFS and ODM
are being formated to F2FS !
edit
even vendor
also what rom base/ram disk is this kernel compatible with?
bober10113 said:
ok nice! i just understood by your OP comment that you were the 1st poster on XDA.
anyways regarding the big issues with the new twrp:
https://forum.xda-developers.com/showpost.php?p=79501974&postcount=479
that guy is also reporting issues check at his 1 st restore screen shot:
EFS and ODM
are being formated to F2FS !
edit
even vendor
also what rom base/ram disk is this kernel compatible with?
Click to expand...
Click to collapse
He should untick on TWRP settings [use -rm instead etc etc etc]... it will then restore backup to the original state which it was ext4
and this kernel compatible with Devbase Oreo or Stock Oreo ASB1 Build
Da-BOSS said:
He should untick on TWRP settings [use -rm instead etc etc etc]... it will then restore backup to the original state which it was ext4
Click to expand...
Click to collapse
i might try it down the road but i just spent hours and hours coming back from those issues so going to stay away from that new twrp for now.
let's try this baby
silly question. this will work with pie right? because i see a lot of oreo mentions...
Sent from my [device_name] using XDA-Developers Legacy app
karapoutsoglou said:
let's try this baby
silly question. this will work with pie right? because i see a lot of oreo mentions...
Sent from my [device_name] using XDA-Developers Legacy app
Click to expand...
Click to collapse
Only for Oreo No love for PIE.. I only love Oreo
Da-BOSS said:
Only for Oreo No love for PIE.. I only love Oreo
Click to expand...
Click to collapse
and why is that? i know, a provocative question but I'm curious to listen to your reasons[emoji173]️
Sent from my [device_name] using XDA-Developers Legacy app
karapoutsoglou said:
and why is that? i know, a provocative question but I'm curious to listen to your reasons[emoji173]️
Sent from my [device_name] using XDA-Developers Legacy app
Click to expand...
Click to collapse
Mods & battery life/ performance ratio the problem with PIE kernels is that any mod you try to apply breaks something else..while doing the same on Oreo stays rock solid stable and yet still provides performance and battery life even at stock compared to Pie kernels.
I still believe Pie needs time to mature enough but that's not the only reason I stay on Oreo and maintaining it
Some kernel mods breaks Pie kernel and simply doesn't work... biggest example is GPU OC in Oreo it works wonderfully and smoothly
Also all mods & modules works for Oreo due to xposed officially fully functional with Oreo.. while Pie needs different kinds of hooks and hacks just to work... and not all modules works with edxposed
Don't tell me PIE is more secure.... you have just rooted your device...that's by itself less secure than unrooted device..
I believe Oreo gives the full performance potential to Note 9 compared to Pie.
Da-BOSS said:
Mods & battery life/ performance ratio the problem with PIE kernels is that any mod you try to apply breaks something else..while doing the same on Oreo stays rock solid stable and yet still provides performance and battery life even at stock compared to Pie kernels.
I still believe Pie needs time to mature enough but that's not the only reason I stay on Oreo and maintaining it
Some kernel mods breaks Pie kernel and simply doesn't work... biggest example is GPU OC in Oreo it works wonderfully and smoothly
Also all mods & modules works for Oreo due to xposed officially fully functional with Oreo.. while Pie needs different kinds of hooks and hacks just to work... and not all modules works with edxposed
Don't tell me PIE is more secure.... you have just rooted your device...that's by itself less secure than unrooted device..
I believe Oreo gives the full performance potential to Note 9 compared to Pie.
Click to expand...
Click to collapse
I've never experienced note 9 with oreo. which rom do you recommend from xda? if you don't want to tell, send me inbox. thank you
one last question. what advantages gives an overclocked gpu?
Sent from my [device_name] using XDA-Developers Legacy app
karapoutsoglou said:
I've never experienced note 9 with oreo. which rom do you recommend from xda? if you don't want to tell, send me inbox. thank you
one last question. what advantages gives an overclocked gpu?
Sent from my [device_name] using XDA-Developers Legacy app
Click to expand...
Click to collapse
I recommend Devbase Oreo or Light ROM Oreo or even stock Oreo ROM all works
GPU OC advantages leads to increased performance & FPS when heavy gaming less lag and stutters.. especially when used or coupled with F2FS filesystem
Hi,
Thanks for this kernel.
I'm assuming this kernel does not work with AOSP roms? Didn't see any mention of it in the first post..
Related
PS: The anime character "Haruhi Suzumiya" is copyright of its owner
PS: arise fix
Open up a file manager and go to the root folder. You need to have SuperSU installed for this
You'll see a folder called su, go to /su/su.d
In this folder create a text file, label it as "permissive.sh" and put the following code in
Code:
supolicy --live "permissive *"
Then save the file and go to recovery and flash arise and Dolby Atmos addons again and then reboot
It should now work
Stop reading my bs! Here's the download link
https://srv1.botstack.host:8000/oneplus/op2/custom-kernel-for-haruhios-v3.8-STABLE.zip
Or
http://srv1.botstack.host:9000/oneplus/op2/custom-kernel-for-haruhios-v3.8-STABLE.zip
This is a project that started as a kernel for my ROM and that is what it's going to be
It can be flashed on other ROMs too and I will gladly provide support however I can't guarantee results
Do note that this is a "secure" kernel. It has many of the security patches merged from CAF and selinux enforcing is forced with no way to go to permissive
What about v4a?
Get SuperSU and input these lines in a terminal
Code:
supolicy --live "allow mediaserver mediaserver_tmpfs:file { read write execute };
allow audioserver audioserver_tmpfs:file { read write execute };"
Wait for a few seconds, swipe away v4a from the recent apps list and launch it again. It should now work
Why isn't a thermal throttling tweak included inside this kernel?
Well in my usage the kernel is so fast that thermal throttling modifications are not needed. You can apply if you want
Currently known bugs?
Nothing
OMG you're copying boeffla!
Relax. I used boeffla's anykernel base as I was in a hurry and didn't have time to make my own zip. Also, boeffla's anykernel zip is one of the best around trust me
What are the features?
Too lazy to write, check back here in a few days but there are quite a lot of features you're gonna like
I'm a nerd, I support the GPL, I'm gonna take you down because you didn't release the source code and neither did you tell me whose toolchain you used!
Bro you need to take it easy
Toolchain: https://bitbucket.org/mdalexca/aarch64-linux-android-6.x
Kernel source: https://github.com/anupritaisno1/android_kernel_oneplus_msm8994_custom
I'll try it when there is ROM with new security patch. Looking forward to it!
NeoVsk said:
I'll try it when there is ROM with new security patch. Looking forward to it!
Click to expand...
Click to collapse
I don't care about other ROMs but I'm actively adding security patches into my kernel's source so relax
uuu, every time i see new thread, and especialy new kernel i'm goign crazy excited thanks and good luck!
btw, so this kernel is same that comes with halogenos?
chxei said:
uuu, every time i see new thread, and especialy new kernel i'm goign crazy excited thanks and good luck!
btw, so this kernel is same that comes with halogenos?
Click to expand...
Click to collapse
Not at all
Anyone else having slow charging speeds with this kernel? Usually I get around 1.9A, here I only get around 0.5A
NeoVsk said:
Anyone else having slow charging speeds with this kernel? Usually I get around 1.9A, here I only get around 0.5A
Click to expand...
Click to collapse
Known issue
anupritaisno1 said:
Known issue
Click to expand...
Click to collapse
Could you include fast charge in following builds?
NeoVsk said:
Could you include fast charge in following builds?
Click to expand...
Click to collapse
That was my mistake. I forked fast charging from halogenos without realizing that it never worked
This is something I sadly can't fix. You'll have to wait for halogenos devs to update this
Fast charge coming in next build like....
Camera bug fixed!
I don't usually gamble but when I do I buy note7
May we have two versions? A reverted version for the camera and the current one...? Some ROMs are behind and are not working properly with the new commits about camera. Sorry if I am saying something wrong. I am a noob on these
xarisCY said:
May we have two versions? A reverted version for the camera and the current one...? Some ROMs are behind and are not working properly with the new commits about camera. Sorry if I am saying something wrong. I am a noob on these
Click to expand...
Click to collapse
If you start the camera, my kernel fails to turn it off so the camera will be unavailable for use after the first time you use it and you'll have to reboot
I'm working on fixing this bug. Why are you interested in this bug?
Sorry, my mistake. I though was something different.. Sorry
Where can i download naruhi ROM?
Kernel has been updated
All known bugs squashed!
Seems cool but an enforcing only kernel has its downside for me. I'm not sure if arise works with an enforcing kernel, would love to see a permissive version as well.
anupritaisno1 said:
Kernel has been updated
All known bugs squashed!
Click to expand...
Click to collapse
Great job! But I'm still getting only about 700mA when charging
Although the Kernel make the ROM very smooth but it's not battery friendly.
playkish said:
Although the Kernel make the ROM very smooth but it's not battery friendly.
Click to expand...
Click to collapse
On my phone I can't find a difference between my kernel and stock
Also this is a cm kernel. Expect some general battery drain
That being said, I've really worked hard on wakelocks and doze
Hi got your quote on bens kernel page @anupritaisno1, could you explain me more about this kernel. I guess it will break the focus of my camera due to some new commits, etc as bens kernel v5 had done the same to me. Also, as im using bens RR Rom, will this have any bugs or side affects with that rom (i had flashed boeffla kernel and had to face a lot of problems on his rom such as the xposed modules becoming inactive or not performing after some time, etc.) and last main thing, idle battery drain
This is Touchwiz Nougat for SM-C9000 aka C9LTECHN.
IF YOU FLASH ON C900F YOU DO AT YOUR OWN RISK. YOU HAVE BEEN WARNED
PLEASE BEFORE YOU FLASH ROMS MAKE A COMPLETE BACKUP OF YOUR SYSTEM INCLUDING EFS SO YOU DO NOT BRICK YOUR MOBILE
Modem and Bootloader
Bootloader and Modem from C9000ZHU1BRC2: https://www.androidfilehost.com/?fid=962339331458990219 (SM-C9000)
Stock Odin Firmware
C9000ZHU1BRC2: https://www.androidfilehost.com/?w=files&flid=202643
Roms
Nougat C9000ZHU1BQK1 Debloated: https://www.androidfilehost.com/?fid=889964283620764671 (C900F ported to C9000)
Nougat C9000ZHU1BQK1 DeOdex Debloated: https://www.androidfilehost.com/?fid=673791459329060973 (C900F ported to C9000)
Nougat C9000ZHU1BQL3 Debloated: https://www.androidfilehost.com/?fid=673791459329068625 (Stock HK Firmware)
Nougat C9000ZHU1BQL3 DeOdex Debloated: https://www.androidfilehost.com/?fid=817906626617955776 (Stock HK Firmware)
Nougat C9000ZHU1BRC2 Debloated: https://www.androidfilehost.com/?fid=818070582850509672 (Stock HK Firmware)
Nougat C9000ZZH1BRD1 Debloated: https://www.androidfilehost.com/?fid=674106145207491679 (C900F ported to C9000)
Kernels
Nougat Travis Kernel: https://www.androidfilehost.com/?fid=962157660013070127
Nougat RC2 Stock Kernel: https://www.androidfilehost.com/?fid=962187416754474062
Nougat RD1 Stock Kernel: https://www.androidfilehost.com/?fid=746163614322262568
Xposed for Nougat
https://www.androidfilehost.com/?w=files&flid=229076
These roms includes stock kernel by default and are slightly debloated and or deodexed. Supersu or Magisk is auto installed for root access.
Kernel Features:
Installs SuperSU/Magisk
Permissive
Added IO BFQ Scheduler
Disabled DM_VERITY
Disabled Forced File Encryption
Disabled KNOX
Disabled TIMA
Disabled RKP
Disabled KAP
Disabled Secure Storage
Enabled CIFS Filesystem Support
Enabled NFS Filesystem Support
Increase Battery Charging Levels
Fsync Toggle (Enable/Disable)
Kernel Patched up to 3.10.108
Mild undervolt for our cpu and gpu
Use all cores to boot
F2FS
Ramdisk Optimised
Added core control
Fingerprint fixed fast wakeup enabled
Added more govs
CVE Patches updated as of JAN/2018
Logitech,Microsoft,Sony gamepad support
Kernel Source:
https://github.com/travismills82/c9lte-kernel/commits/Touchwiz-Nougat
very nice rom. very very thank you. you are exellent
ahmetk711 said:
Sen türkmüsün abi ya. Turkcell yazınca. roma tr desteği varmı
Click to expand...
Click to collapse
He is not a turk, and yes there is turkish
evet, turcke dil var
travis82 said:
This is Touchwiz Nougat for SM-C9000
Nougat C9000ZHU1BQK1: https://www.androidfilehost.com/?fid=889964283620764671
Nougat C9000ZHU1BQK1 DeOdex: https://www.androidfilehost.com/?fid=673791459329059940
Nougat Test Kernel: https://androidfilehost.com/?fid=962021903579491176
Nougat QK1 Stock Kernel: https://www.androidfilehost.com/?fid=745849072291687390
Xposed for Nougat: https://www.androidfilehost.com/?w=files&flid=229076
This includes stock kernel and is ported from C900F and is slightly debloated. Magisk is auto installed for root access. I will add more to the main thread here as I cleanup.
Click to expand...
Click to collapse
Wow! this is amazing. You are fast!
Can we flash the same supersu we use on marshmallow to root?
Edit: Thank you @AL_IRAQI
aftermath85 said:
Wow! this is amazing. You are fast!
Can we flash the same supersu we use on marshmallow to root?
Click to expand...
Click to collapse
Yeah
Stuck on samsung galaxy c9 pro screen. can you tell me how can I do that ? instructions ???
MrMutlu said:
Stuck on samsung galaxy c9 pro screen. can you tell me how can I do that ? instructions ???
Click to expand...
Click to collapse
Wipe Data
Flash ROM
Wait for it to boot up ?
which one did you flash ?, i tried it before and it boots up fine
I tried Nougat C9000ZHU1BQK1 DeOdex and I had bootloop. I tried normal and its works fine but battery is decreasing faster.
MrMutlu said:
I tried Nougat C9000ZHU1BQK1 DeOdex and I had bootloop. I tried normal and its works fine but battery is decreasing faster.
Click to expand...
Click to collapse
DeOdex takes a bit longer to boot up, so wait and see
Ok guys 1 I updated deodex try again it might of been my bad **** happens. 2. battery will drain faster till sleep kicks in for apps this should be a known fact right off the table. 3. give it a few days so stuff kicks in your usage is factored in etc. dont be a noob that types before soft kicks in you will just make me go on a wild goose chase with no info can you all give me a debug log before typing crap please seriously? 4th let's get me logs before you upset the dev's your you all are SOL sh!t out of luck on support besides SAMSUCK. Common logic guys and this go's for all devices please.
Thanks
Trav
How is the kernel working that I made please be a bit more vocal it helps me out a lot.
i did'nt used because : i installed after i have set-up fingerprint and pin, after kernel install both pin and fingerprint was unknown, so i put back twrp back-up
criszz said:
i did'nt used because : i installed after i have set-up fingerprint and pin, after kernel install both pin and fingerprint was unknown, so i put back twrp back-up
Click to expand...
Click to collapse
Yea no worries I patched the files in the rom it should be no issue, but I am waiting for the N source to drop cuz like when I worked on Tab S2 I never had an issue with N kernel vs C9. So I know they added in wifi qualcomm source I can tell cuz no more module. So I am hoping I can get the rest perfect like I did tab.
Ok, so do you guys want a port still?, or do you want me to wait for HK Firmware? Both roms work fine on the main op so I'm curious. Next kernel will be Nougat source when Samsung releases it so no more PM'S about that please.
better wait for hk and my personal opinion is to make a rom very colse to stock, remove only app who can be found on market, nothing else, and ofcourse your kernel or stock one. thank you
N source i think it will be a bit better since it will have wifi and better fp firmware in it. My odex rom has all playstore apps removed.
travis82 said:
How is the kernel working that I made please be a bit more vocal it helps me out a lot.
Click to expand...
Click to collapse
I wanted to know if you guys experience a bit slow charging, I'm using the stock kernel & 1.4G rom? ^__^
Still, I am loving our nougat c9pro. Thank you devs and guys
aftermath85 said:
I wanted to know if you guys experience a bit slow charging, I'm using the stock kernel & 1.4G rom? ^__^
Still, I am loving our nougat c9pro. Thank you devs and guys
Click to expand...
Click to collapse
Stock kernel does 1.7a max for fast charge. So it looks like that did not change. Mine I upped it to 2a and I was thinking maybe 2.4a but I don't have a charger to test 2.4 out.
You guys get any slowdowns at all when you fill up ram? I was thinking of Zram and using this instead of a pagefile since the emmc 5.1 chip is slow at read write vs ufs storage. That way all paging will be done in ram and not use the emmc chip. I'll have to try it out this weekend and see if it helps speed up the device in general.
I put odex rom, dirty install and all working fine till now. The same like in barebone prism rom codes like *#06# not working. Must be samsung fault. Very good odex room, no need deodex for me. Also Xposed part from grenify cannot be activated, must be Xposed fault. Thank's Travis82 for rom and hop for hk one soon.
When we recieve HK firmware I have a lot that i will do to speedup the rom and kernel I tested on my port and it was much much much... faster. So until then just wait it up. I noticed same issue as in M that if cores are defined for hotplug that the big cores never slept well to 400mhz so I'll try to get that fixed up when I get source and a new firmware to play with also.
This kernel is the result of a common work with @Leicxan. It can only be used on H990 and was successfully on single sim AND double sim variants. D.O.T.S. kernel is :
- Dirty Santa rooted
- Optimized
- Tweaked
- Stock based
Caution
Nor @Leicxan nor I are responsible for any damage caused to your phone. Any of the action you'll make to flash a kernel theorically voids your warranty. If don't accept any risk, then keep your stock phone
Content
- Based on v10g official LGE sources
- Compiled with UBERTC 7.x Linaro 7.2.1 (since V1.4)
- Dirty Santa root as implemented by @emdroidle
- CPU Governors : performance, powersave, userspace, ondemand, conservative, interactive, darkness, nightmare, zzmove, blu_active, elementalx, chill, dancedance. Default is interactive.
- I/O Schedulers : noop, deadline, cfq, fiops, sio, bfq, zen, maple. Default is zen.
- TCP congestion protocols : htcp, cubic, bic, reno, westwood. Default is westwood.
- Adreno idler
- Adrenoboost
- Exfat Support
- KCAL
- RCTD removed
- Wakelocks management
- Various small optimizations and tweaks
History
V1.0 [11/10] : original version
V1.1 [11/22] : CPU frequency hard limit (for battery drain improvement) and various minor fixes
V1.2 [11/27] : CPU frequency fix, exfat from samsung's open source module, LGE adaptive readahead
V1.3 [12/11] : Upstream Kernel to 3.18.86 thanks to @thirdzcee. Disabled LGE's rctd, ccmd and triton. Disabled some debug configuration. Note : Windows Defender can detect the archive as a Fuerboos trojan, this is a false positive.
V1.4 [01/04] : Fix for kernel crash when using pptp vpn. Upstream Kernel to 3.18.90.
Installation instructions
Follow the instructions provided by @emdroidle here : https://forum.xda-developers.com/v20/development/dirtysanta-h990-t3624296
At step 16, instead of typing fastboot reboot, just unplug the usb cable, remove battery, wait 5 sec, put the battery back and reboot the phone. This should limit the risk of static screen at reboot.
Once the kernel installed, update your phone to the latest KDZ for your region using KDZ Writer : https://forum.xda-developers.com/v20/development/tool-kdz-writer-t3649818
Known bugs
Some users reported issues with SD cards formated with exFat. This is not a general issue. The root cause is not clear (linked to the way the SD card is formated ?).
How to report a problem
It is very important to provide as many details as possible when you report a problem. It means providing :
- the model of your phone
- the version of the kernel and of the KDZ you updated to
- a precise description of the problem and of the circumstances
- logs (logcat & dmesg) : https://forum.xda-developers.com/showthread.php?t=2185929
Q&A
Before asking please :
- read the posts in this thread. The "Search Thread" box is your friend.
- have a look at @xdav20's H990DS Info Bank thread which is full of usefull information : https://forum.xda-developers.com/v20/how-to/h990ds-info-bank-t3703736"
Thanks
@emdroidle for his implementation of Bad Santa on H990
@USA-RedDragon for his werewolf kernel that was inspiring
Sources
https://github.com/guaibao1101/h990x-msm-3.18/tree/DOTS_v1.3
Downloads
Can we flash this over an existing kernel via TWRP if we have already rooted?
p7810456 said:
Can we flash this over an existing kernel via TWRP if we have already rooted?
Click to expand...
Click to collapse
Normally yes.. But if there is a problem, you'll have to restart all over, so make a backup of your phone, just in case..
It would be nice if this can be crossed over to H918.
First of all, just want to say thank you to @jahlex and @Leicxan for bringing the long awaited kernel with literally everything I could ask for to our devices.
Upon first install by flashing in TWRP, wiping dalvik/cache and rebooting, my phone goes to the LG screen, then black screens and I get a kernel crash screen that I've taken a photo of here
Any ideas what's causing it? My system version is in my signature. I'm really keen to get this working! For now I've restored my TWRP backup I did before flashing, back to 0.2.3b
Update: Even after the TWRP restore I was still getting the same problem. Immediately I thought it might be a Magisk problem as that's the only other thing I updated before rebooting. It appears I was correct. I used KDZWriter to re-flash the boot & system partitions of my phone (since Magisk modifies the boot image) and it immediately booted okay with my TWRP backup. Booted back into recovery, flashed the kernel as well as a previous Magisk version (14.0 not 14.2) and my other /system apps & mods, wiped cache, rebooted and sat on the LG screen for a while. Then booted into the OS okay. Glad it worked out and I'm keen to see how this kernel goes.
On a sidenote, do you have any plans to bring it to a more up to date version of the linux base kernel?
jahlex said:
Normally yes.. But if there is a problem, you'll have to restart all over, so make a backup of your phone, just in case..
Click to expand...
Click to collapse
This worked for me! Thanks a lot!
iDefalt said:
First of all, just want to say thank you to @jahlex and @Leicxan for bringing the long awaited kernel with literally everything I could ask for to our devices.
Upon first install by flashing in TWRP, wiping dalvik/cache and rebooting, my phone goes to the LG screen, then black screens and I get a kernel crash screen that I've taken a photo of here
Any ideas what's causing it? My system version is in my signature. I'm really keen to get this working! For now I've restored my TWRP backup I did before flashing, back to 0.2.3b
Update: Even after the TWRP restore I was still getting the same problem. Immediately I thought it might be a Magisk problem as that's the only other thing I updated before rebooting. It appears I was correct. I used KDZWriter to re-flash the boot & system partitions of my phone (since Magisk modifies the boot image) and it immediately booted okay with my TWRP backup. Booted back into recovery, flashed the kernel as well as a previous Magisk version (14.0 not 14.2) and my other /system apps & mods, wiped cache, rebooted and sat on the LG screen for a while. Then booted into the OS okay. Glad it worked out and I'm keen to see how this kernel goes.
On a sidenote, do you have any plans to bring it to a more up to date version of the linux base kernel?
Click to expand...
Click to collapse
Magisk 14.2 and 14.3 are beta version, I tried magisk 14.3 but my h990n always boot into bootloader interface..
So just stay with magisk 14, it doesn't have any issue.
For the Linux version, it will take tons of time to do this even we just upstream our kernel (from 3.18.31 to 3.18.79)
Sent from my OnePlus3T using XDA Labs
Leicxan said:
Magisk 14.2 and 14.3 are beta version, I tried magisk 14.3 but my h990n always boot into bootloader interface..
So just stay with magisk 14, it doesn't have any issue.
For the Linux version, it will take tons of time to do this even we just upstream our kernel (from 3.18.31 to 3.18.79)
Click to expand...
Click to collapse
Yeah I don't know why 14.0 prompted me to update to a beta version. I know 14.3 added something to do with supporting LG devices better, maybe that broke something. Otherwise I'm quite happy with how things are going ?
And yeah I'm somewhat familiar with how long kernel related things can take, it was more of a question if anything.
I've just installed it now, it works perfectly for now much more reactive i've impression Thank you!!
storm68 said:
It would be nice if this can be crossed over to H918.
Click to expand...
Click to collapse
That would be awesome!!!!!!
A million thanka for this for jahlex and lexican
Is the kernel in the downloads in the OP is the same version as this one : DirtySanta-h990-1.2-u721-v10g that was posted back in rooting thread
Or is it newer ?
storm68 said:
It would be nice if this can be crossed over to H918.
Click to expand...
Click to collapse
nymikey said:
That would be awesome!!!!!!
Click to expand...
Click to collapse
We only deal with H990 here guys. Thanks.
shouk_1987 said:
A million thanka for this for jahlex and lexican
Is the kernel in the downloads in the OP is the same version as this one : DirtySanta-h990-1.2-u721-v10g that was posted back in rooting thread
Or is it newer ?
Click to expand...
Click to collapse
This is major evolution of this kernel. DirtySanta-h990-1.2-u721-v10g was basically the stock v10g kernel with Dirty Santa root.
Before all, thank you so much guys, that's a great work
For some opinions i have many friends that buy h990ds last year and me too, we concluded if tha kernel was more optimized battery side was more effective than performances, and will be great that CPU and GPU clocks and voltages will be more unlocked if you can do that , thank you again.
great kernel thank you @jahlex :good: and @Leicxan :good: it works perfectly
zinou213 said:
if tha kernel was more optimized battery side was more effective than performances, and will be great that CPU and GPU clocks and voltages will be more unlocked if you can do that , thank you again.
Click to expand...
Click to collapse
They've already enabled some overcooked frequencies with this, as seen in their Github commits. If it's battery you're looking for, install the AKT Profiles from the thread, and then choose a balanced or battery saving profile. Since installing those and this kernel, I'm regularly seeing 5-7 hours of screen time.
On a side note @jahlex or @Leicxan if you're looking for a beta tester, feedback, or Guinea pig to help out (that isn't actually building the kernel, that's above my ability to simply modify individual files) I'd love to help wherever possible
Been doing the whole TWRP/Flashing/Kernel/ROM thing since I got my G3 way back in the day.
zinou213 said:
Before all, thank you so much guys, that's a great work
For some opinions i have many friends that buy h990ds last year and me too, we concluded if tha kernel was more optimized battery side was more effective than performances, and will be great that CPU and GPU clocks and voltages will be more unlocked if you can do that , thank you again.
Click to expand...
Click to collapse
As @iDefalt said, we already enabled higher max frequency / voltage for both CPU & GPU. We won't go higher because the result would be high risks of unstability and overheating. If you want performance and do not care about battery life, simply switch to performance governor for both CPU & GPU. We use interactive CPU governor by default because it is a good choice considering balance performance / battery life (nightmare & darkness are good choices too). You have plenty of apps to do that, example : https://play.google.com/store/apps/details?id=com.grarak.kerneladiutor.
iDefalt said:
They've already enabled some overcooked frequencies with this, as seen in their Github commits. If it's battery you're looking for, install the AKT Profiles from the thread, and then choose a balanced or battery saving profile. Since installing those and this kernel, I'm regularly seeing 5-7 hours of screen time.
On a side note @jahlex or @Leicxan if you're looking for a beta tester, feedback, or Guinea pig to help out (that isn't actually building the kernel, that's above my ability to simply modify individual files) I'd love to help wherever possible
Been doing the whole TWRP/Flashing/Kernel/ROM thing since I got my G3 way back in the day.
Click to expand...
Click to collapse
OK buddy. We'll remember.
Thanks!!! And with KCAL, it's perfect! :victory:
Huge thanks guys! Everything works great, even video recording. Great work!!!
@jahlex @Leicxan
Thank you for the release. I will report back any noteworthy issues.
Please forgive me if the following comment may deemed as a thread hijacking. I would be happy to remove it on your request.
I have just started a new thread in time for H990DS users and others, with useful information and tutorials that would potentially answer the most commonly asked questions or the issues sooner or later you would run into.
Kcal is so nice to finally have, thank you c:
[size=+2]Resurrected Kernel[/size]
for the Moto G6 (codename: ALI)
####################
The purpose of this kernel is to provide a fully stable up-to-date kernel. The focus is quality over quantity, stability over every possible cherry-pick-able feature out there. However, I am open to requests and/or suggestions
####################
[size=+1]Features[/size]
+ Passes SafetyNet
+ AnyKernel2 format (more info)
+ WireGuard support (more info)
+ Disabled CRC's on data blocks (30% increase in performance)
+ Fsync On/Off support
+ Additional I/O Schedulers (Zen, FIOPS, SIO, BFQ)
+ Increased Zram compression streams
+ Tuned adrenoboost (disabled by default)
+ Advanced TCP congestion options
+ KCAL Color Control
+ Removed dm-verity on system and vendor partition
+ Boeffla wakelock blocker driver v1.1.0
+ Works same as stock (or better?)
+ More to come, stay tuned
####################
[size=+1]Downloads[/size]
+ Beta version -> Resurrected Kernel v1.0 || Oreo 8.0.0
####################
[size=+1]Installation[/size]
+ Download kernel zip
+ Reboot to twrp recovery
+ Choose INSTALL to flash kernel zip
+ Reboot and Profit!
####################
Credits
+ Motorola (for releasing kernel sources)
+ @osm0sis (AnyKernel2 template/source)
+ All commit authors in my kernel source
####################
XDA:DevDB Information
Resurrected Kernel, Kernel for the Moto G6
Contributors
Jleeblanch
Source Code: https://github.com/Jleeblanch/kernel_motorola_msm8953/tree/rk-oreo
Kernel Special Features: See description above
Version Information
Status: Beta
Current Beta Version: v1.0
Beta Release Date: 2018-09-09
Created 2018-09-10
Last Updated 2018-09-09
Please read before flashing...
[size=+2]NOTICE[/size]
As we all know, there are multiple variants/versions of the Moto G6 (codenamed ALI). I personally own the XT1925-6 variant and have tested this kernel on both firmware versions OPS27.104-15-10 (pre-ota)(march security patch) and OPSS27.104-15-10-4 (post-ota)(july security patch).
Being that this kernel uses the AnyKernel2 format and is NOT a full boot.img, my hope is that it'll work for all variants/versions. Make sure to backup your boot partition before attempting to flash this kernel that way if something goes wrong, you can easily restore your boot.img. If this kernel works for you, please lemme know what variant/version you're using so I can make note of it so users in the future can rest assured it'll work for them as well
Lastly, you will need to have flashed a "no-verity_boot.img" for your device and have TWRP installed before you can flash this kernel. In the future, this may change.
Reserved
Flashed perfectly on retus March firmware. First impressions are phone feels a bit snappier. Awesome kernel! Kcal control works great. On my G6 I changed rgb to 235/245/255 and saturation to 40.
Btw I'm using the same variant as you.
this works for XT1925-1 OPS27.82.87?
Alexibarra98 said:
this works for XT1925-1 OPS27.82.87?
Click to expand...
Click to collapse
I already tried it and yes it works
Alexibarra98 said:
I already tried it and yes it works
Click to expand...
Click to collapse
Awesome, good to know!
So far that's 2 confirmed variants
Been using since last night. Smooth as butter! A noticeable upgrade from stock kernel. I've flashed a few things and made a nano so not a good representation of battery life. I'll share my results when I have a normal usage day.
Works for me 1925-6 variant.
Omg, I'd love to see a Play (1922) variant of this kernel get made!
My wishlist includes much of what you've already included. Especially the Adrenoboost, Kcal, CRC disable, and added IO schedulers.
Just curious, do you plan on adding any hotplugging features? Like Intelliplug? Battery life could be drastically increased with implementation.
bubbyj said:
Omg, I'd love to see a Play (1922) variant of this kernel get made!
My wishlist includes much of what you've already included. Especially the Adrenoboost, Kcal, CRC disable, and added IO schedulers.
Just curious, do you plan on adding any hotplugging features? Like Intelliplug? Battery life could be drastically increased with implementation.
Click to expand...
Click to collapse
If you're willing to test (as I don't have that device) I can definitely put together a kernel for you guys.
As far as hot plugging features, that's something I can look into
you have planned to create some custom rom for the moto g6 jleeblanch? I dont like the stock rom
I recommend to anyone try this kernel. It's such a dramatic improvement over stock. So buttery smooth! You might enjoy stock rom better with a better performing kernel.
@Jleeblanch I'd like to donate to your development but don't see where you have a donation link.
Alexibarra98 said:
you have planned to create some custom rom for the moto g6 jleeblanch? I dont like the stock rom
Click to expand...
Click to collapse
I may possibly at some point. However, you are aware that you can flash treble GSI's? Just make sure to use arm A-only versions of whatever rom you wanna try out. I personally haven't tried any so I can't say either way what doesn't or doesn't work, but from what I hear most things do work fine. Just make sure you have a TWRP backup and/or the stock firmware for your variant in case something goes wrong.
giant22000 said:
I recommend to anyone try this kernel. It's such a dramatic improvement over stock. So buttery smooth! You might enjoy stock rom better with a better performing kernel.
@Jleeblanch I'd like to donate to your development but don't see where you have a donation link.
Click to expand...
Click to collapse
Thanks! Glad you're enjoying it!
As far as donations go, I don't currently except them (although as much time as I spend working the various Moto devices I own, I probably should). Regardless, a simple thanks will do [emoji6]
Working like a charm XT1925-3
How can I access the features of the kernel?
Like Kcal control?
darthxa said:
Working like a charm XT1925-3
How can I access the features of the kernel?
Like Kcal control?
Click to expand...
Click to collapse
Try apps like https://play.google.com/store/apps/details?id=flar2.exkernelmanager
Working, thank you
Working nice on XT1925-5 (OPS-27.82.87) Thank you so much. Sir, can you create some custom rom? Or can you say me, how to implentate "Moto fingerprint gestures" into treble roms ?
@Jleeblanch
Maybe you can activate the LED notifications in this kernel. Such things have already been done for older Motorola phones.
Example:
https://forum.xda-developers.com/2015-moto-g/development/kernel-somefeak-moto-g-2015-3rd-gen-t3622936
kemoti said:
@Jleeblanch
Maybe you can activate the LED notifications in this kernel. Such things have already been done for older Motorola phones.
Example:
https://forum.xda-developers.com/20.../kernel-somefeak-moto-g-2015-3rd-gen-t3622936
Click to expand...
Click to collapse
How to enable led notofication if the device doesn't have required hardware?
nlooooo said:
How to enable led notofication if the device doesn't have required hardware?
Click to expand...
Click to collapse
In previous models, there was a hidden diode, using the kernel gave the ability to use it as an LED notification. In moto g6 it is also possible.
https://forum.xda-developers.com/moto-g6/how-to/moto-g6-led-confirmed-t3806165
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Dirty Unicorns Semi GSI for Samsung Devices
By CodeFox & OpenSauce9810​
What is this?
This is a Semi Generic System Image. That means it's a generic system image that's been optimized as much as possible for our Samsung Devices.
How the heck do I flash this?
It's slightly different than flashing a zip, so here's what you need to do.
Download the image file
UNCOMPRESS IT .xz is a compressed file. So you can uncompress it with zarchiver from the playstore or 7zip/winrar.
Flash the ARH6 Vendor Image to your Vendor Partion from TWRP (Press the Install Image button at the bottom right of where you usually select a flashable zip)
Flash the System Image to your System Partition
Optional if you want root (but reccomended): Reboot to recovery again then flash your choice of Magisk. I use 17.1 as I can get galaxy wear to work with that version.
Reboot your device and you should be good to go! No need to flash gapps as they're included.
03.12.2018
Initial Release
05.12.2018
Updated sources to 9.0 r21 release. (December Security Patch)
Gapps included, (dialer and messenger also included so you won't start without a phone or sms app)
Bootanimation changed to reduce boot times
Tweaks to ambient play ticker so it clears when you clear media notifications
Further performance tweaks thanks to @malinathani animations transition smoother now.
09.12.2018
Keystore fixed - You can now use fingerprint within apps (once you've passed safetynet with hideprops module)
Screenshots
[/YOUTUBE]
Video Review Thanks to @vmb265
Click here to view video review
Downloads:
System Image GDrive
Vendor Image
Support & Feedback
I'm happy to provide as much support as possible. Through XDA here or you can get in touch with me and the rest of OpenSauce9810 + our community at our Telegram group here
Our telegram also has a bot which will provide you with the latest builds.
If you're happy with the work I've put into this (endless amounts of hours trying to perfect GSI building) then a simple thanks here or clicking the thanks button below is very appreciated!
Credits and Thanks
Dirty Unicorns (The best ROM ever)
Ivan - Thank you for helping me out every now and then when I'm being stoopid.
Rainbow_Dash - Pointing me in the right direction with regards to fixing the errors.
malinathani- For the UI Jank Fix (Used widely in other GSI's now)
GRaf - best tester
The guys in telegram as a whole, thank you for the feedback and support.
phhusson - thank you for your work on project treble.
XDA:DevDB Information
[Discontinued]Dirty Unicorns[UNOFFICIAL][09.12.2018][S9/S9+/N9], ROM for the Samsung Galaxy Note 9
Contributors
CodeFox, Rainbow_Dash, malinathani, phhusson, Dirty Unicorns, Ivanmeler,
Source Code: https://github.com/DirtyUnicorns/android_manifest
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
ROM Firmware Required: Vendor ARH6
Based On: Dirty Unicorns
Version Information
Status: Stable
Current Stable Version: 1
Stable Release Date: 2018-12-03
Created 2018-12-03
Last Updated 2019-01-07
First! lol
Still on stock ROM but i'd love to flash some Dirty Unicorn goodness.
Any bugs to be aware of?
PieceofSlice said:
First! lol
Still on stock ROM but i'd love to flash some Dirty Unicorn goodness.
Any bugs to be aware of?
Click to expand...
Click to collapse
Fingerprint doesn't worth within apps. Other than that though everything's pretty much good I think.
@CodeFox Thanks for this rom. I used to make my own Du builds for nexus device. It was sucha an amazing experience.
Would love to try DU for note 9.
Just a couple of questions -
- Does any of the Touch wiz features like, pen related features ( bluetooth control work ) ?
- Phone related features by flashing csc files for specific network still doable ?
Techvir said:
@CodeFox Thanks for this rom. I used to make my own Du builds for nexus device. It was sucha an amazing experience.
Would love to try DU for note 9.
Just a couple of questions -
- Does any of the Touch wiz features like, pen related features ( bluetooth control work ) ?
- Phone related features by flashing csc files for specific network still doable ?
Click to expand...
Click to collapse
Pretty much all Samsung features are lost on AOSP however there are a lot of alternative apps that can "revive" the Spen.
PieceofSlice said:
Pretty much all Samsung features are lost on AOSP however there are a lot of alternative apps that can "revive" the Spen.
Click to expand...
Click to collapse
That is what I thought... Thanks for answering
I flashed this twice. Both times I couldn't get the setup wizard to show up. There are no gapps in the app drawer either.
Can someone confirm? I'm pretty sure I did everything right with the flashing process..
Nasty_z said:
I flashed this twice. Both times I couldn't get the setup wizard to show up. There are no gapps in the app drawer either.
Can someone confirm? I'm pretty sure I did everything right with the flashing process..
Click to expand...
Click to collapse
Gapps aren't included. You'll need to download a package from opengapps. Arm64 9.0. I recommend nano.
Don't forget to download a phone and SMS app too.
I copied and pasted from my PE thread so I need to take out the gapps included part. My bad, sorry about that.
CodeFox said:
Gapps aren't included. You'll need to download a package from opengapps. Arm64 9.0. I recommend nano.
Don't forget to download a phone and SMS app too.
I copied and pasted from my PE thread so I need to take out the gapps included part. My bad, sorry about that.
Click to expand...
Click to collapse
No problem. Also, the .xz file needs to be extracted and the IMG file in it needs to be flashed to the system partition. I noticed you haven't included this in the flashing instructions
Thank you for the ROM btw
Nasty_z said:
No problem. Also, the .xz file needs to be extracted and the IMG file in it needs to be flashed to the system partition. I noticed you haven't included this in the flashing instructions
Thank you for the ROM btw
Click to expand...
Click to collapse
I'll update the posts tomorrow. I'm looking after 4 threads at the minute as there's 2 more in the s9 forum ? it's proving to be challenging haha.
You're welcome. This one is a lot smoother than pixel experience.
CodeFox said:
I'll update the posts tomorrow. I'm looking after 4 threads at the minute as there's 2 more in the s9 forum ? it's proving to be challenging haha.
You're welcome. This one is a lot smoother than pixel experience.
Click to expand...
Click to collapse
Haha I can understand. Btw I just restored the galaxy wearable, Samsung accessory service, gear s plugin and Samsung health using titanium backup and I didn't have to reset my gear. It just connected right away and it's working fine now. The backup I made using titanium backup was on Pixel Experience right before I flashed this rom.
I hope it doesn't do a freak reset later.. Too good to be true? :silly:
Nasty_z said:
Haha I can understand. Btw I just restored the galaxy wearable, Samsung accessory service, gear s plugin and Samsung health using titanium backup and I didn't have to reset my gear. It just connected right away and it's working fine now. The backup I made using titanium backup was on Pixel Experience right before I flashed this rom.
I hope it doesn't do a freak reset later.. Too good to be true? :silly:
Click to expand...
Click to collapse
Hmm thanks for letting me know. I'll give it a go. I really do need to start using titanium backup more often. I usually have problems with apps not notifying me of new posts anymore or them being stuck in the past though.
CodeFox said:
Hmm thanks for letting me know. I'll give it a go. I really do need to start using titanium backup more often. I usually have problems with apps not notifying me of new posts anymore or them being stuck in the past though.
Click to expand...
Click to collapse
I agree with you on those issues. Apps like whatsapp are affected with the delayed notifications so I avoid backing it up with titanium backup. Still, the fact that Gear doesn't need to be reset is a big thing. I even toggled Bluetooth on and off multiple times and it still connects to it without any prompt for reset
CodeFox said:
I'll update the posts tomorrow. I'm looking after 4 threads at the minute as there's 2 more in the s9 forum it's proving to be challenging haha.
You're welcome. This one is a lot smoother than pixel experience.
Click to expand...
Click to collapse
Damn just Flased PixelExperience last night. Will definitely be installing this. I found pe was smooth enough so the fact that this is a lot smoother is really nice. Thanks mate
Nasty_z said:
I agree with you on those issues. Apps like whatsapp are affected with the delayed notifications so I avoid backing it up with titanium backup. Still, the fact that Gear doesn't need to be reset is a big thing. I even toggled Bluetooth on and off multiple times and it still connects to it without any prompt for reset
Click to expand...
Click to collapse
The ability to restore gear with titanium is something new ... I could not do that till very recently but last week when I did a restore, there was no need to reset the watch and I was amazed..
Techvir said:
The ability to restore gear with titanium is something new ... I could not do that till very recently but last week when I did a restore, there was no need to reset the watch and I was amazed..
Click to expand...
Click to collapse
Glad to know it's not just me
New build released. see OP for details.
CodeFox said:
New build released. see OP for details.
Click to expand...
Click to collapse
You're on fire! Thanks
i love dirty so much
great to see this
Hello there. Iam new to. Gsi roms. Needed to ask the flashing steps. Iam on light rom right now with dual sim model.
1. In twrp clear everything. Cache data system
2. Flash vendor image
3. Flash system image
So i was able to boot this rom and everything was working included dual sim. then i downloaded viper for android ,flashed in magisk, restarted and kept in boot loop since.