Update from Miui V10.2.3.0.PEJEMIXM root to V10.3.4.0 PJEMIXM root
Will the settings be deleted when updating, or what consequences would it have?:
Hello XDA friends how can you update the Pocophone f1 Root
serravides said:
Hello XDA friends how can you update the Pocophone f1 Root
Click to expand...
Click to collapse
Don't bump up within 2 minutes of posting a question. You are supposed to wait for 24 hrs.
https://forum.xda-developers.com/po...-f1-unlock-bootloader-custom-t3839405/page245
If rooted and with TWRP, I suggest you follow these steps to update the same way I did.
NOTE: Don't forget to backup
1. DOWNLOAD THE ROM (either via updater or from xiaomi.eu, but if using updater, click install later, just let the zip download.
2. disable all MAGISK MODULES
3. reboot to recovery and flash the latest ROM
4. wipe cache and dalvik
5. FLASH latest FED from the post above
6. Flash latest Magisk. Reboot
Again, make sure to follow these steps exactly so as not to mess anything up. Goodluck and be careful
Hello mecoromeo thanks for your help, I have Miui V10.2.3.0, I only have the update (OTA miui-blockota-beryllium_global-V10.2.3.0.PEJMIXM-V10.3.4.0.PEJMIXM-fb1c9ede63-9.0 of 514mb)
what I wanted to know, is if I lose my configurations and applications installed on my Pocophone F1 after updating, in principle I would do it with flash TRWP for flash PEJMIXM-V10.3.4.0 514mb OTA
Hello, mecoromeo, I followed your steps and the TRWP gives me the error 7,
updater process ended with error: 7
error installing zip file /external sd/miui-blockota-belleryum-global V10.2.3.0 PEJMIXM-v10.3.4.0PEJMIXM-fb1c9ede63-.9.0.zip
serravides said:
Hello, mecoromeo, I followed your steps and the TRWP gives me the error 7,
updater process ended with error: 7
error installing zip file /external sd/miui-blockota-belleryum-global V10.2.3.0 PEJMIXM-v10.3.4.0PEJMIXM-fb1c9ede63-.9.0.zip
Click to expand...
Click to collapse
Are you flashing the full ROM? You should.
Related
Hi!
I just got my redmi note 2 and found the device full of chinese apps and the battery life was not what I expected.So I want to flash a new rom and a custom recovery.So I tried to flash TWRP 2.5.7 and I Followed these steps:
downloaded TWRP 2.5.7 and renamed it update.zip
Saved it to Internal Memory
Used the updater app, phone automatically went to the recovery mode
started flashing TWRP
but when The process reached 99% a error message read"update.zip signature verification failed"
I did a full wipe and did it all over again.Same error.also tried MI PC suite but it would'nt let me create a backup hence no flashing.So I am at my wits end here folks.Please help!!!!! And being new to MIUI doesn't help either
I am currently running on MIUI 7.0 stable (7.0.8.0)
SOS SOS!!!!!
You can't flash an unsigned zip file with updater/mi recovery.
MiPCSuite can't create Redmi Note 2 backups, it's a bug.
For install twrp recovery install an official developer rom (you can find it on http://en.miui.com). Now you have root access going into Security / Permissions / Root Permissions.
Install flashify, open it. It will say you haven't got root. Go in into Security / Permissions / Root Permissions and enable it.
Now flash the recovery.img file of TWRP with flashify as a Recovery image.
~ Xiaomi Redmi Note 2 Prime ~
Thank You sir.I will definitely try this. I will let you know if this worked for me.
Also, can the official developer rom be flashed by the updater app? Or some other methods are required?
aaditya99 said:
Thank You sir.I will definitely try this. I will let you know if this worked for me.
Also, can the official developer rom be flashed by the updater app? Or some other methods are required?
Click to expand...
Click to collapse
All official roms can be flashed by updater
~ Xiaomi Redmi Note 2 Prime ~
@SkiFire13 I downloaded the official redmi note 2 developer rom from the xiaomi site and tried to flash it via updater app but the same message appears after the rom iflashed to 6% " signature verification failed".Is there a glitch in updater app.I had updated my phone to MIUI 7.0.8.0 after I bought it.Is it because of that update?I am still stuck in the chinese version rom..help..
aaditya99 said:
@SkiFire13 I downloaded the official redmi note 2 developer rom from the xiaomi site and tried to flash it via updater app but the same message appears after the rom iflashed to 6% " signature verification failed".Is there a glitch in updater app.I had updated my phone to MIUI 7.0.8.0 after I bought it.Is it because of that update?I am still stuck in the chinese version rom..help..
Click to expand...
Click to collapse
Never mind..I have flashed TWRP via fastboot mode.All is well now.Thank you
I rooted my phone and don't know how to install ota updates after rooting phone without any data loss...
Can anyone guide me eith full steps?
Ikaushal said:
I rooted my phone and don't know how to install ota updates after rooting phone without any data loss...
Can anyone guide me eith full steps?
Click to expand...
Click to collapse
xiaomi provides ota to all roms just unroot it for a while and u will also loose twrp
Do I need to go back to the default kernel to get the ota ?
Ikaushal said:
I rooted my phone and don't know how to install ota updates after rooting phone without any data loss...
Can anyone guide me eith full steps?
Click to expand...
Click to collapse
You can install ota after being rooted. There is a custom recovery ORANGEFOX RECOVERY which offers ota. You have to install miui from it and after that you can install ota from it.
You can try flashfire. Download it through google play. You won't lose your data nor root. You can google the steps or go to youtube for more info.
If you want to update to latest stable pie,follow these steps:
1. DOWNLOAD THE GLOBAL STABLE 10.1.3
2. disable all MAGISK MODULES
3. reboot to recovery and flash the latest GLOBAL STABLE PIE ROM
4. wipe cache and dalvik
5. FLASH FED 17.3.zip
6. reboot
[email protected] said:
xiaomi provides ota to all roms just unroot it for a while and u will also loose twrp
Click to expand...
Click to collapse
I unrooted the phone but still not able to update it..
SamyakJ said:
You can install ota after being rooted. There is a custom recovery ORANGEFOX RECOVERY which offers ota. You have to install miui from it and after that you can install ota from it.
Click to expand...
Click to collapse
Will give it a try
mecoromeo said:
You can try flashfire. Download it through google play. You won't lose your data nor root. You can google the steps or go to youtube for more info.
If you want to update to latest stable pie,follow these steps:
1. DOWNLOAD THE GLOBAL STABLE 10.1.3
2. disable all MAGISK MODULES
3. reboot to recovery and flash the latest GLOBAL STABLE PIE ROM
4. wipe cache and dalvik
5. FLASH FED 17.3.zip
6. reboot
Click to expand...
Click to collapse
Flashfire has been discontinued
Ikaushal said:
I rooted my phone and don't know how to install ota updates after rooting phone without any data loss...
Can anyone guide me eith full steps?
Click to expand...
Click to collapse
wihout rebooting the device:
install OTA zip from TWRP
restore recovery image (TWRP),
re-install magisk
wipe dalvik/cache
voilà, that's all it needs. I've done it many times running llineage16.
SamyakJ said:
You can install ota after being rooted. There is a custom recovery ORANGEFOX RECOVERY which offers ota. You have to install miui from it and after that you can install ota from it.
Click to expand...
Click to collapse
Does ORANGE FOX works with updating OTA if the /system partion is modified? Getting error 7 in TWRP with decryption. Help please!
I use Magisk :
1) Uninstall Magisk to restore stock boot image
2) Flash the update through TWRP with encryption support
3) Flash Magisk again
nilg0lap said:
Does ORANGE FOX works with updating OTA if the /system partion is modified? Getting error 7 in TWRP with decryption. Help please!
Click to expand...
Click to collapse
See you have to flash ORANGEFOX RECOVERY using any other TWRP recovery. After you have flashed the recovery you have been asked for password just cancel it. Now go to wipe clear data and reboot to recovery(this will decrypt the device). After that you have to copy the desired miui rom and flash it(copy it from your computer or use sd card or usb to flash). After that flash magisk and you are good to go.
Hello. I was going through this guide --> https://forum.xda-developers.com/poco-f1/how-to/xiaomi-poco-f1-root-unlock-bootloader-t3852520
I've got a problem. I've unlocked bootloader and next I'm booting correctly to TWRP, but when I try to flash any zip of magisk manager I receive an error: "invalid zip file format". I'm using TWRP 3.2.3-0 from first post in guide - I was trying to use both 20181012 and 20181211 versions and no result - still the same error. What can I do? I'm using POCOPHONE F1 with MIUI Global 10.2.3.0
fajniejest said:
Hello. I was going through this guide --> https://forum.xda-developers.com/poco-f1/how-to/xiaomi-poco-f1-root-unlock-bootloader-t3852520
I've got a problem. I've unlocked bootloader and next I'm booting correctly to TWRP, but when I try to flash any zip of magisk manager I receive an error: "invalid zip file format". I'm using TWRP 3.2.3-0 from first post in guide - I was trying to use both 20181012 and 20181211 versions and no result - still the same error. What can I do? I'm using POCOPHONE F1 with MIUI Global 10.2.3.0
Click to expand...
Click to collapse
You have an old version of TWRP... You need to install a newer version - 3.2.3.2 - which you will find by doing a search for it here on XDA...
Just load img file on INTERNAL storage of phone, choose install>install image file> and click on recovery partition. After install go to home menu and restart recovery...
If you still have issues then download magisk again, it may be corrupt...
Cheers....
ultramag69 said:
You have an old version of TWRP... You need to install a newer version - 3.2.3.2 - which you will find by doing a search for it here on XDA...
Just load img file on INTERNAL storage of phone, choose install>install image file> and click on recovery partition. After install go to home menu and restart recovery...
If you still have issues then download magisk again, it may be corrupt...
Cheers....
Click to expand...
Click to collapse
First of all, I'm not going to install TWRP - I want only to boot into TWRP once for flashing Magisk's ZIP.
Second - in this guide OP says that Unofficial TWRP should be used. I've tried v1 and v2 TWRP from the guide. So which other TWRP should I try to boot into? This? https://forum.xda-developers.com/poco-f1/development/recovery-twrp-3-2-3-x-t3836241
fajniejest said:
First of all, I'm not going to install TWRP - I want only to boot into TWRP once for flashing Magisk's ZIP.
Second - in this guide OP says that Unofficial TWRP should be used. I've tried v1 and v2 TWRP from the guide. So which other TWRP should I try to boot into? This? https://forum.xda-developers.com/poco-f1/development/recovery-twrp-3-2-3-x-t3836241
Click to expand...
Click to collapse
I am new on this forum (pocophone) and i seee how messed up it is. You should definitly use official twrp
You don't need official TWRP, but I think you need to install Disable Force Encryption, before installing the Magisk app
This thread will be more helpful.
fajniejest said:
Hello. I was going through this guide --> https://forum.xda-developers.com/poco-f1/how-to/xiaomi-poco-f1-root-unlock-bootloader-t3852520
I've got a problem. I've unlocked bootloader and next I'm booting correctly to TWRP, but when I try to flash any zip of magisk manager I receive an error: "invalid zip file format". I'm using TWRP 3.2.3-0 from first post in guide - I was trying to use both 20181012 and 20181211 versions and no result - still the same error. What can I do? I'm using POCOPHONE F1 with MIUI Global 10.2.3.0
Click to expand...
Click to collapse
what are you trying to flash? If it is Magisk Manager, it is in apk format and you just click it to install. No TWRP.
If it is Magisk, which version are you trying to flash? Try 18.1. And preferably download any file from its source.
EDIT: If Magisk v18.1 is also not flashing, try Magisk Canary version. Some phones need that.
tnsmani said:
what are you trying to flash? If it is Magisk Manager, it is in apk format and you just click it to install. No TWRP.
If it is Magisk, which version are you trying to flash? Try 18.1. And preferably download any file from its source.
EDIT: If Magisk v18.1 is also not flashing, try Magisk Canary version. Some phones need that.
Click to expand...
Click to collapse
I'm trying to flash zip with Magisk Manager, as it is said in guide. I know that I can have an apk, but is it enough to just install apk without having custom recovery (but having bootloader unlocked)?
GrecoNeoV said:
You don't need official TWRP, but I think you need to install Disable Force Encryption, before installing the Magisk app
This thread will be more helpful.
Click to expand...
Click to collapse
I will try it if nothing from "my" guide will work, because I really don't want to lose my storage (I see that in this guide installing Magisk needs it)
fajniejest said:
I'm trying to flash zip with Magisk Manager, as it is said in guide. I know that I can have an apk, but is it enough to just install apk without having custom recovery (but having bootloader unlocked)?
I will try it if nothing from "my" guide will work, because I really don't want to lose my storage (I see that in this guide installing Magisk needs it)
Click to expand...
Click to collapse
Well Here is how i managed it to work. After i unlocked my bootloader i launched twrp and flashed beta magisk 19.0 (not latest anymore because 19.1 just today showed up) then i reminded that i forgot about DisableForceEncryption_Treble_v18.0.zip so i flashed iit and after it flashed again magisk 19.0, after reboot it everything was fine
GrecoNeoV said:
You don't need official TWRP, but I think you need to install Disable Force Encryption, before installing the Magisk app
This thread will be more helpful.
Click to expand...
Click to collapse
There is no need to flash DFE. I've unlocked my bootloader, installed TWRP, flashed PE and Magisk 19.0 all without DFE which I don't need.
@OP, you need TWRP version 3.2.3-2 at a minimum, which you can boot using 'fastboot boot twrp-<version>.img' . Then flash Magisk. You'll
need at least version 18.1.
HTH
guhvanoh said:
There is no need to flash DFE. I've unlocked my bootloader, installed TWRP, flashed PE and Magisk 19.0 all without DFE which I don't need.
@OP, you need TWRP version 3.2.3-2 at a minimum, which you can boot using 'flashboot boot twrp-<version>.img' . Then flash Magisk. You'll
need at least version 18.1.
HTH
Click to expand...
Click to collapse
The command is 'fastboot boot twrp-<version>.img'
tnsmani said:
The command is 'fastboot boot twrp-<version>.img'
Click to expand...
Click to collapse
Thanks for the correction. I really don't know where I got flashboot from.
Cheers!
guhvanoh said:
There is no need to flash DFE. I've unlocked my bootloader, installed TWRP, flashed PE and Magisk 19.0 all without DFE which I don't need.
@OP, you need TWRP version 3.2.3-2 at a minimum, which you can boot using 'fastboot boot twrp-<version>.img' . Then flash Magisk. You'll
need at least version 18.1.
HTH
Click to expand...
Click to collapse
So, to make it clear (and to not brick my poco... ):
1. I should use TWRP image from this link --> https://twrp.me/xiaomi/xiaomipocophonef1.html...
2. ...and I don't need to replace my recovery - just booting it once (as You described) is enough.
3. I should flash Magisk's ZIP, not MagiskManager's ZIP or Magisk.apk
4. No more flashing, clearing data and other operations needed.
Am I right?
1 - Yes.
2 - That's down to you. I have TWRP recovery installed and I have the app as well.
3 - You need to flash Magisk and install the apk. See this link for instructions on installing Magisk.
4 - Yes, you need to clear data, wipe dalvik and cache when installing a new ROM. If updating a current rom, I just wipe dalvik & cache.
HTH
Hey I know its not a thread related but if u install magisk can u tell me if you have 60fps screen recoding option? Because I already Dirty flashed rom once and nothing changed still cant unlock it :/
guhvanoh said:
1 - Yes.
2 - That's down to you. I have TWRP recovery installed and I have the app as well.
3 - You need to flash Magisk and install the apk. See this link for instructions on installing Magisk.
4 - Yes, you need to clear data, wipe dalvik and cache when installing a new ROM. If updating a current rom, I just wipe dalvik & cache.
HTH
Click to expand...
Click to collapse
Big thanks! Finally dealt with it. So grateful for Your help. :victory:
Dearminder said:
Hey I know its not a thread related but if u install magisk can u tell me if you have 60fps screen recoding option? Because I already Dirty flashed rom once and nothing changed still cant unlock it :/
Click to expand...
Click to collapse
Yes, I do. I've not tried it though...
EEa(EU) rom 10.3.3.0 update
Received it too yesterday and all is ok.
Does anyone know how to flash that update using TWRP? I have rooted my Stock ROM with TWRP, and the Update is downloaded OTA and then reboots to recovery, but TWRP obviously is unable to install it: First it doesn't ask for the password to decrypt the data partition and shows the crypted content of the partition, making it impossible to see or select the downloaded update. A reboot into recovery decrypts the data partition and shows the downloaded Update (as a ZIP) in the folder /downloaded_rom. I tried to install that ZIP from TWRP manually, but to no avail - all you get is an error message.
Edit: Forget the question. Seems the phone healed itself. The first OTA download was an update 10.3.1 to 10.3.3 with a size of around 500 MB, and that couldn't be installed. When the System Updater saw this didn't succeed, it downloaded the complete 10.3.3 Package (2,2 GB) OTA, and installed that via TWRP with no problems whatsoever. I lost Magisk, which i needed to reinstall, but other than that, everything's fine.
Edit 2: The complete package obviously also overwrites TWRP, which i had to reinstall, too.
cgdams said:
Does anyone know how to flash that update using TWRP? I have rooted my Stock ROM with TWRP, and the Update is downloaded OTA and then reboots to recovery, but TWRP obviously is unable to install it: First it doesn't ask for the password to decrypt the data partition and shows the crypted content of the partition, making it impossible to see or select the downloaded update. A reboot into recovery decrypts the data partition and shows the downloaded Update (as a ZIP) in the folder /downloaded_rom. I tried to install that ZIP from TWRP manually, but to no avail - all you get is an error message.
Edit: Forget the question. Seems the phone healed itself. The first OTA download was an update 10.3.1 to 10.3.3 with a size of around 500 MB, and that couldn't be installed. When the System Updater saw this didn't succeed, it downloaded the complete 10.3.3 Package (2,2 GB) OTA, and installed that via TWRP with no problems whatsoever. I lost Magisk, which i needed to reinstall, but other than that, everything's fine.
Edit 2: The complete package obviously also overwrites TWRP, which i had to reinstall, too.
Click to expand...
Click to collapse
reagarding edit 2: which twrp did you use? I have real problems after the update, as the phone has no wifi now and the recovery is not working anymore
I also want to know if there's a place to get flash able zips through twrp for the latest eu roms.
lvnatic said:
I also want to know if there's a place to get flash able zips through twrp for the latest eu roms.
Click to expand...
Click to collapse
Here you can get all the official ROMs, fastboot and recovery
https://xiaomifirmwareupdater.com/archive/miui/raphael/
magdap said:
reagarding edit 2: which twrp did you use? I have real problems after the update, as the phone has no wifi now and the recovery is not working anymore
Click to expand...
Click to collapse
sorry i'm late with an answer, but i always use the newest version of mauronofrios TWRP (https://forum.xda-developers.com/k20-pro/development/recovery-unofficial-twrp-xiaomi-redmi-t3944363).
Robbo.5000 said:
Here you can get all the official ROMs, fastboot and recovery
https://xiaomifirmwareupdater.com/archive/miui/raphael/
Click to expand...
Click to collapse
Thanks, can I flash the file using twrp and keep the recovery?
lvnatic said:
Thanks, can I flash the file using twrp and keep the recovery?
Click to expand...
Click to collapse
You will need to flash Magisk immediately after the ROM to stop MIUI restoring stock recovery.
i have rooted my device miui 10 with TWRP recovery, my device downloaded miui 11 (belekota) and wait to install
can i install new update 11 or will stuck in problem and lost all my app's and data ??
I updated mine...all data remained .....lost root though
fmkingpin said:
I updated mine...all data remained .....lost root though
Click to expand...
Click to collapse
what about TWRP recovery, did it back again to stock recovery or with the same TWRP recovery ??
Reverted to stock recovery.
fmkingpin said:
Reverted to stock recovery.
Click to expand...
Click to collapse
ok, i will try, i hope not found problem
thanks
zeko_1992 said:
ok, i will try, i hope not found problem
thanks
Click to expand...
Click to collapse
Only problem I found is that I can't install back a tarp recovery.....if u get through rotting after update please share...
fmkingpin said:
Only problem I found is that I can't install back a tarp recovery.....if u get through rotting after update please share...
Click to expand...
Click to collapse
i didn't found root and twrp for the new update
i'm still using miui 10 because i need root and twrp recovery
i hope miui 11 rooted :crying:
fmkingpin said:
Only problem I found is that I can't install back a tarp recovery.....if u get through rotting after update please share...
Click to expand...
Click to collapse
did you tried root again after update ?? success or fail ??
zeko_1992 said:
did you tried root again after update ?? success or fail ??
Click to expand...
Click to collapse
Fail.
fmkingpin said:
Fail.
Click to expand...
Click to collapse
hmmm... my device updated itself without my permission :crying:
i lost my root and twrp, i'm stuck with useless stupid update
tried searching in internet about root for new update and twrp but nothing for now
i think we will wait weeks or months to see new updates for root and twrp
if i found anything new, i will post here and mention you :good:
Guys
Download Miui update in zip file and flash via recovery.
It doesn't revert to stock recovery and keeps your twrp along with root intact.
zeko_1992 said:
i didn't found root and twrp for the new update
i'm still using miui 10 because i need root and twrp recovery
i hope miui 11 rooted :crying:
Click to expand...
Click to collapse
I've successfully rooted my miui 10 by this method
https://forum.xda-developers.com/redmi-note-4/how-to/guide-root-using-magisk-stock-recovery-t3718203
And i've installed miui 11 now, somehow.. latest magisk (v20.1) can't root my device with the same method. So i tried to root with magisk v2.0 (same i did in miui 10) and its work
swapyworld said:
Guys
Download Miui update in zip file and flash via recovery.
It doesn't revert to stock recovery and keeps your twrp along with root intact.
Click to expand...
Click to collapse
bucks_26 said:
I've successfully rooted my miui 10 by this method
https://forum.xda-developers.com/redmi-note-4/how-to/guide-root-using-magisk-stock-recovery-t3718203
And i've installed miui 11 now, somehow.. latest magisk (v20.1) can't root my device with the same method. So i tried to root with magisk v2.0 (same i did in miui 10) and its work
Click to expand...
Click to collapse
thanks for help guys, the problem now how to downgrade ???
zeko_1992 said:
thanks for help guys, the problem now how to downgrade ???
Click to expand...
Click to collapse
Hope you have backed up system, boot and vendor partition.
Wipe system, dalvik, cache, vendor partition and restore backup.
swapyworld said:
Hope you have backed up system, boot and vendor partition.
Wipe system, dalvik, cache, vendor partition and restore backup.
Click to expand...
Click to collapse
i don't have custom recovery, my device back to stock recovery
i tried downgrade with mi flash and step by step from websites but error, tried flash from recovery but it changed, there are 3 options
- restart
- wipe data
- contact mi assistant
no option install update.zip, also from device and check software update, no option to choose install update
everything changed, stupid update, i don't feel any good change
i think developer will take long time to root new update and use custom recovery
no downgrade work, no one try
zeko_1992 said:
i don't have custom recovery, my device back to stock recovery
i tried downgrade with mi flash and step by step from websites but error, tried flash from recovery but it changed, there are 3 options
- restart
- wipe data
- contact mi assistant
no option install update.zip, also from device and check software update, no option to choose install update
everything changed, stupid update, i don't feel any good change
i think developer will take long time to root new update and use custom recovery
no downgrade work, no one try
Click to expand...
Click to collapse
Why don't you try installing recovery using fastboot method and then flash magisk 20.1 zip through recovery.
Please check if bootloader is still unlocked before trying this.
swapyworld said:
Why don't you try installing recovery using fastboot method and then flash magisk 20.1 zip through recovery.
Please check if bootloader is still unlocked before trying this.
Click to expand...
Click to collapse
i tried using fastboot (mi flash tool) but error, tried another step in same app but show error
the new update changed everything, no one can downgrade from 11 to 10, i don't know why ??
from 10 to 8 you can downgrade without any problem, 11 you can't do anything
solved
finally i made it and back again to miui 10
best program for use xiaomitool
flash anything with 2-3 steps
bucks_26 said:
I've successfully rooted my miui 10 by this method
https://forum.xda-developers.com/redmi-note-4/how-to/guide-root-using-magisk-stock-recovery-t3718203
And i've installed miui 11 now, somehow.. latest magisk (v20.1) can't root my device with the same method. So i tried to root with magisk v2.0 (same i did in miui 10) and its work
Click to expand...
Click to collapse
thanks for highlighting issues with Magisk 20.1!
I used 20.0 and everything works
Any one using using gcam on miui 11?