Anyone has tried flashing GSI on Mi 9 SE (EEA especially) ? been trying to install one of it (aospextended) but stuck at fastboot mode after flashing with twrp ?
Im also interested to do so, some instructions to flash them I would also appreciate!
Maybe u can try this one
https://treble.andro.plus/
Foloko rom gsi , i heard they add patch for mi9se fingerprint
bonbibonkers said:
Maybe u can try this one
https://treble.andro.plus/
Foloko rom gsi , i heard they add patch for mi9se fingerprint
Click to expand...
Click to collapse
There are few GSIs that have the patch already. It is just a matter of user review before we try them.
bonbibonkers said:
Maybe u can try this one
https://treble.andro.plus/
Foloko rom gsi , i heard they add patch for mi9se fingerprint
Click to expand...
Click to collapse
Can you share the details how to install it?
rzki03 said:
Can you share the details how to install it?
Click to expand...
Click to collapse
Just trying to add in my 2cents, but have you tried following this article?(I just googled it a few minutes ago)
https://www.xda-developers.com/flash-generic-system-image-project-treble-device/
Try reading the troubleshooting tips section? I have not personally tried flashing GSI, but I am assuming you're more adventurous than I am.
And if you had read the article, pardon me, was not trying to insult your intelligence.
puppetminds said:
Just trying to add in my 2cents, but have you tried following this article?(I just googled it a few minutes ago)
https://www.xda-developers.com/flash-generic-system-image-project-treble-device/
Try reading the troubleshooting tips section? I have not personally tried flashing GSI, but I am assuming you're more adventurous than I am.
And if you had read the article, pardon me, was not trying to insult your intelligence.
Click to expand...
Click to collapse
oh, okay then. i haven't read that yet. sorry
rzki03 said:
Can you share the details how to install it?
Click to expand...
Click to collapse
Installation instruction is given in the website. Dhould be enough following the instruction
ebautista said:
Installation instruction is given in the website. Dhould be enough following the instruction
Click to expand...
Click to collapse
For mi9SE the instruction doesn't work.
After flash image and reboot start the bootloop.
Booted few days ago.. but now I am running the latest xiaomi.eu rom...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
satmaster said:
Booted few days ago.. but now I am running the latest xiaomi.eu rom...
View attachment 4758693View attachment 4758694View attachment 4758695
Click to expand...
Click to collapse
Did you follow any instructions? What about the standby drain? I Love to have a rom with nearly Stock attitudes, but it must be usable...
After over 2 hours of trying I'm still ending up in a bootloop as well
satmaster said:
Booted few days ago.. but now I am running the latest xiaomi.eu rom...
Click to expand...
Click to collapse
how do you install it? i'm eager to install it but i'm afraid i got bootloop again like my last time installing it
Ok, I think I know my issue.
The current images are "a/b" images. Mi9SE seems to be "a" only (at least thats what Treble Check is telling me).
190501 offers an "a" only build, I think thats the one satmaster got working.
Maybe I will try again later.
freii said:
Ok, I think I know my issue.
The current images are "a/b" images. Mi9SE seems to be "a" only (at least thats what Treble Check is telling me).
190501 offers an "a" only build, I think thats the one satmaster got working.
Maybe I will try again later.
Click to expand...
Click to collapse
u didn't check what system u have before installing gsi rom? lol
rzki03 said:
u didn't check what system u have before installing gsi rom? lol
Click to expand...
Click to collapse
first time dealing with gsi, wasn't fully aware of that.
just to excited to finally get rid of miui.
freii said:
first time dealing with gsi, wasn't fully aware of that.
just to excited to finally get rid of miui.
Click to expand...
Click to collapse
congrats for that. i want to install gsi but still afraid to do that, just flashed xiaomi.eu several hour ago, it's *maybe* good enough for me, for now...
ale.giordano said:
For mi9SE the instruction doesn't work.
After flash image and reboot start the bootloop.
Click to expand...
Click to collapse
It will. You may have done something wrong
satmaster said:
Booted few days ago.. but now I am running the latest xiaomi.eu rom...
Click to expand...
Click to collapse
Have you used A-only or AB?
ebautista said:
It will. You may have done something wrong
Click to expand...
Click to collapse
But what? There isn't really much to do wrong, is it?
As I'm using xiaomi.eu I first reverted to stock, did a factory reset and than fastboot flash system.
Ended up with bootloop as well (a-only version).
Next time I try I will have a look at the logs.
Related
Post your review please ?
Download link -
http://bigota.d.miui.com/V8.2.4.0.MALMIDL/miui_HM3SGlobal_V8.2.4.0.MALMIDL_a5d58e63b8_6.0.zip
Easily flashable via stock recovery.
Steps -
(You need to remain connected to Internet/Wifi, as updater verifies the package)
1. Go to updater
2. Click the 3 dots icon on top right
3. Click "choose update package"
4. Choose this zip
5. Click Ok
Whole process may take 15 min - 30 min. In my case it took about 20 mins.
Enjoy ?
Full changelog -
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
impulsar said:
How many of you got it? What's changed? Your review please ?
Click to expand...
Click to collapse
It's nightly build right?
arceuss said:
It's nightly build right?
Click to expand...
Click to collapse
Yup, but its stable
impulsar said:
Yup, but its stable
Click to expand...
Click to collapse
Is there any fastboot Rom of miui 8.2.4.0?
arceuss said:
Is there any fastboot Rom of miui 8.2.4.0?
Click to expand...
Click to collapse
Not sure, you could check on miui.com or you can download the zip and flash it via stock recovery
Well, I felt that
Update is not that exciting
Everything is same as mini 8
This has better stability
Good carrier connection till now
Has added features of global development rom
Camera captures from fingerprint also.
Little bit better battery I feel.
For me first boot Took really long time.
arceuss said:
Well, I felt that
Update is not that exciting
Everything is same as mini 8
This has better stability
Good carrier connection till now
Has added features of global development rom
Camera captures from fingerprint also.
Little bit better battery I feel.
For me first boot Took really long time.
Click to expand...
Click to collapse
Thanks for the review bro, did you flash it via stock recovery?
impulsar said:
Thanks for the review bro, did you flash it via stock recovery?
Click to expand...
Click to collapse
Yes
Updated to miui 8.2.4.0, would give a short review after testing it for one day (and yeah it's global stable ?)
Can you tell me what is nightly on MIUI , heard it for first time also how to extract update links.
Battlecreed5 said:
Can you tell me what is nightly on MIUI , heard it for first time also how to extract update links.
Click to expand...
Click to collapse
Nightlies are generally meant for beta testers only, and you can extract update links via logcat
impulsar said:
Nightlies are generally meant for beta testers only, and you can extract update links via logcat
Click to expand...
Click to collapse
Can you tell me how.
Battlecreed5 said:
Can you tell me how.
Click to expand...
Click to collapse
http://www.droid-life.com/2014/06/05/download-nexus-ota-url-file/
arceuss said:
Yes
Click to expand...
Click to collapse
Sorry, but Can I flash this Rom (.zip) via Custom Recovery, I have Unlocked bootloader, Root and TWRP and I am on 8.1.1.0.
kukuteku said:
Sorry, but Can I flash this Rom (.zip) via Custom Recovery, I have Unlocked bootloader, Root and TWRP and I am on 8.1.1.0.
Click to expand...
Click to collapse
Yes. Use twrp. It might take some time don't worry. Once finished disable dm verify. And reboot.
arceuss said:
Yes. Use twrp. It might take some time don't worry. Once finished disable dm verify. And reboot.
Click to expand...
Click to collapse
Thank. I wont lose the TWRP and the unlocked bootloader, right?
kukuteku said:
Thank. No wont lose the TWRP and the unlocked bootloader, right?
Click to expand...
Click to collapse
100% you won't lose unlocked bootloader. Twrp, even if lost it might be due to some mistake during flashing, can be recovered by flashing it using fastboot mode. You may have to wipe (just wipe no need to format anything in data partition) before installation. I think dirty flash won't work.
arceuss said:
100% you won't lose unlocked bootloader. Twrp, even if lost it might be due to some mistake during flashing, can be recovered by flashing it using fastboot mode. You may have to wipe (just wipe no need to format anything in data partition) before installation. I think dirty flash won't work.
Click to expand...
Click to collapse
Thank a lot!
:good:
Whom do I request to move this thread to ROMs/Kernels section?
impulsar said:
Whom do I request to move this thread to ROMs/Kernels section?
Click to expand...
Click to collapse
Ask the forum moderator who just closed a previous thread.
Good afternoon friends,
I´m in troubles with in my S6 Edge, my unit doesn´t start Android, appears only the BLUE LED Flashing ... I can put in Downlod mode, I can put in recovery mode and i can make Flash from ODIN successful, but the problem persists .
PS: I installed TWRP.
Sorry for my language... I´m brazilian.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Andre DJ said:
Good afternoon friends,
I´m in troubles with in my S6 Edge, my unit doesn´t start Android, appears only the BLUE LED Flashing ... I can put in Downlod mode, I can put in recovery mode and i can make Flash from ODIN successful, but the problem persists .
PS: I installed TWRP.
Sorry for my language... I´m brazilian.
Click to expand...
Click to collapse
hello try Samsung switch might work or you might need to wait longer for your device to boot up it does take time after flashing.regards joe
joecool666 said:
hello try Samsung switch might work or you might need to wait longer for your device to boot up it does take time after flashing.regards joe
Click to expand...
Click to collapse
The Smart Switch also did not work!
Andre DJ said:
The Smart Switch also did not work!
Click to expand...
Click to collapse
how long have you been waiting for it to boot.
joecool666 said:
how long have you been waiting for it to boot.
Click to expand...
Click to collapse
see yourself (Follow):
youtu.be/CxFqMJCQUio
Andre DJ said:
see yourself (Follow):
youtu.be/CxFqMJCQUio
Click to expand...
Click to collapse
leave it booting for a short while like 5 even ten minutes it can take a long time to boot. it could be internal issue by the look of your device. or keep trying power/home/vol-up.maybe someone can help you but you said you have tried everything i know. hope you get it sorted out good luck.regards Joe.
Hi
In the download mode, don't you have something like "mmc read failed" or write failed ?
iDroid27210 said:
Hi
In the download mode, don't you have something like "mmc read failed" or write failed ?
Click to expand...
Click to collapse
No, the process with "Odin" happens without fail...
I think it is efs problem try cm14 rom my other s6 edge was like yours but can be booted with cm14
shahram Ali said:
I think it is efs problem try cm14 rom my other s6 edge was like yours but can be booted with cm14
Click to expand...
Click to collapse
I did the installation of CM 13 and worked with some bugs but worked. When I try to install Stork Rom it doesn´t work
Andre DJ said:
I did the installation of CM 13 and worked with some bugs but worked. When I try to install Stork Rom it doesn´t work
Click to expand...
Click to collapse
I know stock rom dosent boot i am still working to make it boot but can u look at youre imei and serial number if they are same as back youre phones cover
shahram Ali said:
I know stock rom dosent boot i am still working to make it boot but can u look at youre imei and serial number if they are same as back youre phones cover
Click to expand...
Click to collapse
Good afternoon Friend, the IMEI and serial number are OK. I'll post photos soon ...
Andre DJ said:
Good afternoon Friend, the IMEI and serial number are OK. I'll post photos soon ...
Click to expand...
Click to collapse
do not post it after lot of research and trying it seems like hardware problem cause i tried too many things but no luck i gave up only aosp rom is can be booted
When flashing stock Rom the first boot can take up to 30 minutes! Try again amd leave it for longer.
callumbr1 said:
When flashing stock Rom the first boot can take up to 30 minutes! Try again amd leave it for longer.
Click to expand...
Click to collapse
Good evening friend, I waited more than 5 hours, but the system did not start...
Andre DJ said:
Good evening friend, I waited more than 5 hours, but the system did not start...
Click to expand...
Click to collapse
Tell me the exact steps you took and what android version do you have and region?
shahram Ali said:
do not post it after lot of research and trying it seems like hardware problem cause i tried too many things but no luck i gave up only aosp rom is can be booted
Click to expand...
Click to collapse
The device when installing a CM 13 starts without audio and without câmeras...
https://youtu.be/vLfMCzySTZs
Andre DJ said:
The device when installing a CM 13 starts without audio and without câmeras...
https://youtu.be/vLfMCzySTZs
Click to expand...
Click to collapse
Just flash lineage 14 even box guy couldn't boot it with stock rom
by wzsx150. The default is Chinese. English language can be set up.
https://www.lanzous.com/i39m37e
That was pretty fast!
qianjie said:
by wzsx150. The default is Chinese. English language can be set up.
https://www.lanzous.com/i39m37e
Click to expand...
Click to collapse
Amazingly quick!
I get my Mi 9 on Monday. Would flashing magisk via twrp work at stage, or would we need to await a specific root method?
Awesome. Can't wait for my phone to arrive.
cd993 said:
Amazingly quick!
I get my Mi 9 on Monday. Would flashing magisk via twrp work at stage, or would we need to await a specific root method?
Click to expand...
Click to collapse
https://raw.githubusercontent.com/t...uilds/release.json?tdsourcetag=s_pctim_aiomsg
this magisk version can be used
qianjie said:
https://raw.githubusercontent.com/t...uilds/release.json?tdsourcetag=s_pctim_aiomsg
this magisk version can be used
Click to expand...
Click to collapse
Great thanks, looking forward to seeing how people get on with this.
Did anyone flashed it yet?
Yes but it not works 100%, its start recovery mode, you can change landuage nut if you want to flash its impossible as you cant see correct folder and files tree
Laserek_Poland said:
Yes but it not works 100%, its start recovery mode, you can change landuage nut if you want to flash its impossible as you cant see correct folder and files tree
Click to expand...
Click to collapse
I think your data encrypted.
Laserek_Poland said:
Yes but it not works 100%, its start recovery mode, you can change landuage nut if you want to flash its impossible as you cant see correct folder and files tree
Click to expand...
Click to collapse
Can you test my eXtreme Kernel?
xdamami said:
I think your data encrypted.
Click to expand...
Click to collapse
Beside after rebbot to system its back to stock recovery
能否解密date分区
Laserek_Poland said:
Beside after rebbot to system its back to stock recovery
Click to expand...
Click to collapse
Well, without flashing a custom rom, the stock rom will restore the stock recovery.
Anyway, TWRP will be more useful whenever custom roms are available. I have bootloader unlocked, but not in hurry to flash TWRP recovery.
qianjie said:
by wzsx150. The default is Chinese. English language can be set up.
https://www.lanzous.com/i39m37e
Click to expand...
Click to collapse
The Development Section is not for sharing the work of others but posting your own work. Please be sure to read the sticky linked below before posting in the development section:
A message from the moderators - All users please read
THREAD MOVED
Doesn't work. Sets the device name to "xiaomi9" but should be "cepheus", so flashing aborts because of wrong device name.
merlin699 said:
Doesn't work. Sets the device name to "xiaomi9" but should be "cepheus", so flashing aborts because of wrong device name.
Click to expand...
Click to collapse
Change the updater script in the EU rom zip file from "cepheus" to "xiaomi9" and voila, it works.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my MI 9 using Tapatalk
ted presley said:
Change the updater script in the EU rom zip file from "cepheus" to "xiaomi9" and voila, it works. View attachment 4724159
Sent from my MI 9 using Tapatalk
Click to expand...
Click to collapse
Thanks for that, actually I was thinking of something like this. But it would be great if the Recovery could be corrected to the correct device name.
merlin699 said:
Thanks for that, actually I was thinking of something like this. But it would be great if the Recovery could be corrected to the correct device name.
Click to expand...
Click to collapse
That's Xiaomi's fault, just flash EU rom once, the device name will change to "Cepheus" and next EU rom has no problem with that.
ted presley said:
That's Xiaomi's fault, just flash EU rom once, the device name will change to "Cepheus" and next EU rom has no problem with that.
Click to expand...
Click to collapse
cool thank you.
merlin699 said:
cool thank you.
Click to expand...
Click to collapse
But, just my theory, need to test....
11.0.2.0
https://sourceforge.net/projects/xi...i_MI9SE_V11.0.2.0.QFBCNXM_v11-10.zip/download
https://androidfilehost.com/?fid=4349826312261732205
11.0.5.0
https://sourceforge.net/projects/xi...ti_MI9SE_V11.0.5.0.PFBCNXM_v11-9.zip/download
https://androidfilehost.com/?fid=4349826312261622569
11.0.3.0
https://sourceforge.net/projects/xi...ti_MI9SE_V11.0.3.0.PFBCNXM_v11-9.zip/download
https://androidfilehost.com/?fid=1899786940962605580
New links will be posted here.
Camerado said:
11.0.3.0
https://sourceforge.net/projects/xi...ti_MI9SE_V11.0.3.0.PFBCNXM_v11-9.zip/download
https://androidfilehost.com/?fid=1899786940962605580
New links will be posted here.
Click to expand...
Click to collapse
can i flash it over this one?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my Mi 9 SE using Tapatalk
drik05 said:
can i flash it over this one?View attachment 4841075
Click to expand...
Click to collapse
I did, successfully.
What's the difference Between this and the developer rom?
guitarbite said:
What's the difference Between this and the developer rom?
Click to expand...
Click to collapse
This is stable version of the rom, where this rom is most stable and bugless than Developer rom. If you a tester, you should stick to dev rom as it has more features than stable rom but with unexpected bugs?
Is it possible to instal via grus recovery?
How bout rooting?
MTAVALI said:
Is it possible to instal via grus recovery?
How bout rooting?
Click to expand...
Click to collapse
what do you mean by grus recovery? stock recovery or twrp?
this is fake. i installed this it's not stable, it's beta. and it stutters really bad i'm so annoyed
ambinp said:
this is fake. i installed this it's not stable, it's beta. and it stutters really bad i'm so annoyed
Click to expand...
Click to collapse
I also installed this rom, everything seems ok, no stuttering at all.....
edit:
You seemed right: on settings/specifications it says:
Miui Version: 11.0.3 Stable
Androidversion: 9 PKQ1.181121.001 (?????)
HammDefy said:
I also installed this rom, everything seems ok, no stuttering at all.....
edit:
You seemed right: on settings/specifications it says:
Click to expand...
Click to collapse
IDK who cares its stable for me and fixes everything wrong with miui 10
does flashing this wipe data?
and what is the difference between the one xiaomi released today? is it a chinese only rom?
Is this based on Android 10?
Not for the time being. But it will soon get MIUI 11 based on Android 10.
topongo said:
does flashing this wipe data?
and what is the difference between the one xiaomi released today? is it a chinese only rom?
Click to expand...
Click to collapse
ok, I figured out the xiaomi.eu one is based on the chinese rom released some days translated in many languages
Anyone can explain me how to flash this room? (i dont wanna brick my phone, im really newbie in this area)
im right now with MIUI GLOBAL 10.3.4 Stable. Locked Bootloader.
If i flash MIUI 11 i will loose all my data? config and installed programs?
Thanks in advance!
westj said:
Anyone can explain me how to flash this room? (i dont wanna brick my phone, im really newbie in this area)
im right now with MIUI GLOBAL 10.3.4 Stable. Locked Bootloader.
If i flash MIUI 11 i will loose all my data? config and installed programs?
Thanks in advance!
Click to expand...
Click to collapse
Unlock Bootloader is REQUIRED before installing other rom than official MIUI
rzki03 said:
Unlock Bootloader is REQUIRED before installing other rom than official MIUI
Click to expand...
Click to collapse
i know that, ineed to know the rest of my questions...
zepedroj said:
Is this based on Android 10?
Click to expand...
Click to collapse
No, stable is android 9
Beta MIUI 11 .eu is android 10
westj said:
i know that, ineed to know the rest of my questions...
Click to expand...
Click to collapse
1) Unlock bootloader (1week)
1.5) Potentially flash vbmeta.img in fastboot as stated on the first page - if step 3 doesn't boot to recovery and boots to fastboot instead.
2) Boot to fastboot and flash custom recovery (twrp)
3) Boot custom recovery wipe all data, reboot to recovery, copy ROM.zip to your phone and flash.
11.0.5.0 added in OP.
Updated Android Security Patch to October 2019. Increased system security.
I Need to Install LineageOS , Situation is cant root cause of knox in samsung os have to use fastboot method
what help do you exactly need?
starkprime74 said:
what help do you exactly need?
Click to expand...
Click to collapse
In need to make a twrp port for this device so i can flash custom rom(lineage os). I tried porting with a guide from xda but flashed in to bootloop.
Many people need this , we all got this device free and it has knox and no privacy so it will be a great help .
AddictedA1 said:
Many people need this , we all got this device free and it has knox and no privacy so it will be a great help .
Click to expand...
Click to collapse
This is great that you are willing to work towards a working twrp for A7 lite . Maybe you should join forces with @tagcart and @R0GUEEE who have also expressed their will, in another thread, to do the same and maybe other more experiensed members will come along to help achieve this and even come up with a custom rom eventually.
nikoum said:
This is great that you are willing to work towards a working twrp for A7 lite . Maybe you should join forces with @tagcart and @R0GUEEE who have also expressed their will, in another thread, to do the same and maybe other more experiensed members will come along to help achieve this and even come up with a custom rom eventually.
Click to expand...
Click to collapse
Can you send the device tree? I'll try to compile TWRP
$cronos_ said:
Can you send the device tree? I'll try to compile TWRP
Click to expand...
Click to collapse
I am sorry, i am a complete noob without any knowledge of these things. I do not even know what a device tree is. Maybe you should pm the ones mentioned in my post if they can help. Thanks anyway.
any update for twrp?
Samuel805 said:
any update for twrp?
Click to expand...
Click to collapse
Please don't ask for ETAs
$cronos_ said:
Please don't ask for ETAs
Click to expand...
Click to collapse
Yes I agree but what we need to know is how is the port procedure going on and how can we help in it?
I'm willing to make some efforts but if you guys cans share what you have accomplished then it might be easier add on to your works
$cronos_ said:
Can you send the device tree? I'll try to compile TWRP
Click to expand...
Click to collapse
Can you tell me how to make a device tree? I can send it to you
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
gta7lite device tree.zip
drive.google.com
this is the file I made following that tutorial
any update?
$cronos_ said:
Can you send the device tree? I'll try to compile TWRP
Click to expand...
Click to collapse
This is for T220:https://github.com/Skorpion96/gta7lite_recovery i extracted it
any update for t225?
bro update for t225?
DARK002s said:
any update for t225?
Click to expand...
Click to collapse
DARK002s said:
bro update for t225?
Click to expand...
Click to collapse
I have a twrp half built it shows on screen and touch screen works I used cd_spidy_action_recovery_builder- to build it it's built for SM-T225-AVE1 Android 11 but it has mtp issues which is at a kernal level so I got the AVE1 kernal source code so I can get twrp and SM-T225- Talking to each other that's going to be fun ye ha let me know if you want me to send in link with custom vbmeta and custom recovery.img .
The tree wrap does flash root magisk on SD card and also you can boot into fastboot and flash gsi using Windows SDK tools I'm running crdriid Android 12 and the battery is great and it's faster let me know if you want the work I have and I will post the link mtp who ever wants it ????b
Hers trh crdriid gsi pictures Android 12
@Andropop: Any opportunity to download this TWRP .. ?