Does anyone know how i can delete all Xposed related material through the TeamWin recovery at the beginning? I was rooted and tried installing Xposed and the phone wont go past the sprint logo anymore. I that cant be fixed How do i reset my phone completely to atleast have what i had before. thanks if anyone answers.
CRICE89 said:
Does anyone know how i can delete all Xposed related material through the TeamWin recovery at the beginning? I was rooted and tried installing Xposed and the phone wont go past the sprint logo anymore. I that cant be fixed How do i reset my phone completely to atleast have what i had before. thanks if anyone answers.
Click to expand...
Click to collapse
Well you installed the wrong xposed get an xposed Uninstaller put it on your sd card and flash it in xposed and you be good to go you need the wanam 87.1 xposed for the J3 emerge and if you want systemless xposed you got to lower your magisk to 15.3 and then flash wanam systemless xposed 87.3 (if you try to flash that systemless on a higher magisk you will get error 1 cause the template for that xposed sadly isn't getting updated) after its flashed wipe and your phone boots up you going to see that it's in your modules list then you can flash the new magisk (on magisk 19 and higher it will show that xposed is not installed but it is its just an error that the xposed material installer or regular installer isn't updated to perceive how magisk places modules in 19 and up but when you download modules or check your xposed modules it won't say xposed not installed so you be good hope this helps you)
[emoji3436]I Willl Scarfice For Those That I Love [emoji3434]
thanks one more thing
PoochyX said:
Well you installed the wrong xposed get an xposed Uninstaller put it on your sd card and flash it in xposed and you be good to go you need the wanam 87.1 xposed for the J3 emerge and if you want systemless xposed you got to lower your magisk to 15.3 and then flash wanam systemless xposed 87.3 (if you try to flash that systemless on a higher magisk you will get error 1 cause the template for that xposed sadly isn't getting updated) after its flashed wipe and your phone boots up you going to see that it's in your modules list then you can flash the new magisk (on magisk 19 and higher it will show that xposed is not installed but it is its just an error that the xposed material installer or regular installer isn't updated to perceive how magisk places modules in 19 and up but when you download modules or check your xposed modules it won't say xposed not installed so you be good hope this helps you)
[emoji3436]I Willl Scarfice For Those That I Love [emoji3434]
Click to expand...
Click to collapse
I used SuperSu not Magisk.., Can i download the Xposed uninstaller on my phone ? and i tried removing everything that had xposed on it ftom the team win area the boot recovery mode. What do you mean flash it in Xposed ? or do you mean just flash the xposed uninstaller?
CRICE89 said:
I used SuperSu not Magisk.., Can i download the Xposed uninstaller on my phone ? and i tried removing everything that had xposed on it ftom the team win area the boot recovery mode. What do you mean flash it in Xposed ? or do you mean just flash the xposed uninstaller?
Click to expand...
Click to collapse
Yeah I meant flash the xposed Uninstaller in twrp..... Yeah put the xposed Uninstaller on your SD card and put the sd card back in your phone... Why would you use supersu it's deprecated
Sent from my SM-J327P using Tapatalk
tried this didnt work
PoochyX said:
Well you installed the wrong xposed get an xposed Uninstaller put it on your sd card and flash it in xposed and you be good to go you need the wanam 87.1 xposed for the J3 emerge and if you want systemless xposed you got to lower your magisk to 15.3 and then flash wanam systemless xposed 87.3 (if you try to flash that systemless on a higher magisk you will get error 1 cause the template for that xposed sadly isn't getting updated) after its flashed wipe and your phone boots up you going to see that it's in your modules list then you can flash the new magisk (on magisk 19 and higher it will show that xposed is not installed but it is its just an error that the xposed material installer or regular installer isn't updated to perceive how magisk places modules in 19 and up but when you download modules or check your xposed modules it won't say xposed not installed so you be good hope this helps you)
[emoji3436]I Willl Scarfice For Those That I Love [emoji3434]
Click to expand...
Click to collapse
I tried what you said thanks for responding but that didnt work for me what else can I do ? thanks again
new update
CRICE89 said:
I tried what you said thanks for responding but that didnt work for me what else can I do ? thanks again
Click to expand...
Click to collapse
now it says no OS installed when i try to reboot did i mess up the phone completely now ?
CRICE89 said:
now it says no OS installed when i try to reboot did i mess up the phone completely now ?
Click to expand...
Click to collapse
I don't understand how you flash the Uninstaller zip for xposed and now twrp is saying you have no os installed as if you wiped the system partition if that is however your case I would suggest Odin your stock firmware and after it boots oem unlock again and flash twrp and then search for the proper xposed also root this time with magisk also are you flashing the decrypt zip to make your data partion accessible via twrp so you can do backups im surprised you didn't even have a twrp backup in place before even attempting to flash xposed
[emoji3436]I Will Sacrifice For Those That I Love [emoji3434]
1 more question
PoochyX said:
I don't understand how you flash the Uninstaller zip for xposed and now twrp is saying you have no os installed as if you wiped the system partition if that is however your case I would suggest Odin your stock firmware and after it boots oem unlock again and flash twrp and then search for the proper xposed also root this time with magisk also are you flashing the decrypt zip to make your data partion accessible via twrp so you can do backups im surprised you didn't even have a twrp backup in place before even attempting to flash xposed
[emoji3436]I Will Sacrifice For Those That I Love [emoji3434]
Click to expand...
Click to collapse
Will you tell me the things I need to do this? Do i use the same Odin I used to root ? and yeah I know i didnt know what i was doing I wiped the system thinking it would solve my problem..., Just if you can give me a list of the things i need for this that would be very appreciated... Im new at this rooting stuff I only wanted to root to change the color of my system font to like blue or purple bit it didnt work out for me haha thanks again for all of your responses. : )
CRICE89 said:
Will you tell me the things I need to do this? Do i use the same Odin I used to root ? and yeah I know i didnt know what i was doing I wiped the system thinking it would solve my problem..., Just if you can give me a list of the things i need for this that would be very appreciated... Im new at this rooting stuff I only wanted to root to change the color of my system font to like blue or purple bit it didnt work out for me haha thanks again for all of your responses. : )
Click to expand...
Click to collapse
Well to change the color of the font you going to use ifont app and it has a xposed module with it that gives you the ability to use color fonts.... Now the process is simple your going to reflash the firmware for your phone to get it up and running... After your up and running your going to unlock develop options in the settings by going to about device and tying on your bulid Verison a couple of times and when your in them settings you going to make sure oem unlock is on, once you do that you going to flash twrp again and this time you going to download magisk and flash it the newest stable one to obtain your root after that you going to look for xposed Verison 87.1 special Samsung bulid by wannam and flash that wipe Dalvic and cache and reboot its going to take a little while but after that it's going to boot system optimize all your apps and then finally download or get it before the xposed material installer it's going to say xposed Verison 87.1 is active after that you can download the ifont app activate the module in xposed and proceed to change your color font...
[emoji3436]I Will Sacrifice For Those That I Love [emoji3434]
Magisk ???
CRICE89 said:
Will you tell me the things I need to do this? Do i use the same Odin I used to root ? and yeah I know i didnt know what i was doing I wiped the system thinking it would solve my problem..., Just if you can give me a list of the things i need for this that would be very appreciated... Im new at this rooting stuff I only wanted to root to change the color of my system font to like blue or purple bit it didnt work out for me haha thanks again for all of your responses. : )
Click to expand...
Click to collapse
CRICE89 said:
Does anyone know how i can delete all Xposed related material through the TeamWin recovery at the beginning? I was rooted and tried installing Xposed and the phone wont go past the sprint logo anymore. I that cant be fixed How do i reset my phone completely to atleast have what i had before. thanks if anyone answers.
Click to expand...
Click to collapse
PoochyX said:
Well you installed the wrong xposed get an xposed Uninstaller put it on your sd card and flash it in xposed and you be good to go you need the wanam 87.1 xposed for the J3 emerge and if you want systemless xposed you got to lower your magisk to 15.3 and then flash wanam systemless xposed 87.3 (if you try to flash that systemless on a higher magisk you will get error 1 cause the template for that xposed sadly isn't getting updated) after its flashed wipe and your phone boots up you going to see that it's in your modules list then you can flash the new magisk (on magisk 19 and higher it will show that xposed is not installed but it is its just an error that the xposed material installer or regular installer isn't updated to perceive how magisk places modules in 19 and up but when you download modules or check your xposed modules it won't say xposed not installed so you be good hope this helps you)
[emoji3436]I Willl Scarfice For Those That I Love [emoji3434]
Click to expand...
Click to collapse
PoochyX said:
Well to change the color of the font you going to use ifont app and it has a xposed module with it that gives you the ability to use color fonts.... Now the process is simple your going to reflash the firmware for your phone to get it up and running... After your up and running your going to unlock develop options in the settings by going to about device and tying on your bulid Verison a couple of times and when your in them settings you going to make sure oem unlock is on, once you do that you going to flash twrp again and this time you going to download magisk and flash it the newest stable one to obtain your root after that you going to look for xposed Verison 87.1 special Samsung bulid by wannam and flash that wipe Dalvic and cache and reboot its going to take a little while but after that it's going to boot system optimize all your apps and then finally download or get it before the xposed material installer it's going to say xposed Verison 87.1 is active after that you can download the ifont app activate the module in xposed and proceed to change your color font...
[emoji3436]I Will Sacrifice For Those That I Love [emoji3434]
Click to expand...
Click to collapse
Hey thanks for the help. I have TWRP again now which Magisk do i get the latest version ? and is it installed the same way SuperSu is installed ?
Im rooted installed magisk beta 92.1
CRICE89 said:
Hey thanks for the help. I have TWRP again now which Magisk do i get the latest version ? and is it installed the same way SuperSu is installed ?
Click to expand...
Click to collapse
I rooted and and am now using magisk beta 92.1 which is the correct XPOSED APK for SAMSUNG J3 EMERGE ? ALSO I NEED THE ZIP FILE TOO CORRECT THATS ALL I NEED CAN YOU HELP 1 LAST TIME ? i just need the xposed correct files.
CRICE89 said:
I rooted and and am now using magisk beta 92.1 which is the correct XPOSED APK for SAMSUNG J3 EMERGE ? ALSO I NEED THE ZIP FILE TOO CORRECT THATS ALL I NEED CAN YOU HELP 1 LAST TIME ? i just need the xposed correct files.
Click to expand...
Click to collapse
Latest stable magisk is 19.2......
https://forum.xda-developers.com/ga...nt/wip-custom-rom-j3-emerge-sm-j327p-t3634206
[emoji3436]I Will Sacrifice For Those That I Love [emoji3434]
There's also a systemless magisk for are device also however the template is old the trick to installing that would be 2 downgrading your magisk to 15.3 flashing the systemless xposed and then upgrading back to 19.2 however with the new magisk in my experience when you on 19 and higher and tru to downgrade magisk you lose root I think it's the new method Magisk is using in 19 + so since you already rooted with 19 + I suggest just flash the system xposed from the link I sent you only thing with that is with the system xposed you can't turn it off on the fly to regain safety net like you could with the systemless one
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[emoji3436]I Will Sacrifice For Those That I Love [emoji3434]
PoochyX said:
There's also a systemless magisk for are device also however the template is old the trick to installing that would be 2 downgrading your magisk to 15.3 flashing the systemless xposed and then upgrading back to 19.2 however with the new magisk in my experience when you on 19 and higher and tru to downgrade magisk you lose root I think it's the new method Magisk is using in 19 + so since you already rooted with 19 + I suggest just flash the system xposed from the link I sent you only thing with that is with the system xposed you can't turn it off on the fly to regain safety net like you could with the systemless one View attachment 4763721
[emoji3436]I Will Sacrifice For Those That I Love [emoji3434]
Click to expand...
Click to collapse
Thats the system xposed download link still active
[emoji3436]I Will Sacrifice For Those That I Love [emoji3434]
thank you...,
PoochyX said:
Latest stable magisk is 19.2......
https://forum.xda-developers.com/ga...nt/wip-custom-rom-j3-emerge-sm-j327p-t3634206
[emoji3436]I Will Sacrifice For Those That I Love [emoji3434]
Click to expand...
Click to collapse
CRICE89 said:
I rooted and and am now using magisk beta 92.1 which is the correct XPOSED APK for SAMSUNG J3 EMERGE ? ALSO I NEED THE ZIP FILE TOO CORRECT THATS ALL I NEED CAN YOU HELP 1 LAST TIME ? i just need the xposed correct files.
Click to expand...
Click to collapse
thank you for all your help I wouldnt have been able to root correctly without it..., THANKS...
HELLO
PoochyX said:
There's also a systemless magisk for are device also however the template is old the trick to installing that would be 2 downgrading your magisk to 15.3 flashing the systemless xposed and then upgrading back to 19.2 however with the new magisk in my experience when you on 19 and higher and tru to downgrade magisk you lose root I think it's the new method Magisk is using in 19 + so since you already rooted with 19 + I suggest just flash the system xposed from the link I sent you only thing with that is with the system xposed you can't turn it off on the fly to regain safety net like you could with the systemless one View attachment 4763721
[emoji3436]I Will Sacrifice For Those That I Love [emoji3434]
Click to expand...
Click to collapse
Hey how do I disable Xposed modules or Xposed to fix phone not starting up cause I dont wanna do the whole process all over again... Im on the TWRP screen i tried downloading a module and it wouldnt start back up.
CRICE89 said:
Hey how do I disable Xposed modules or Xposed to fix phone not starting up cause I dont wanna do the whole process all over again... Im on the TWRP screen i tried downloading a module and it wouldnt start back up.
Click to expand...
Click to collapse
You got to go into system settings thru the file manager in twrp to the xposed folder and delete the module list file and your phone will boot up with no modules enabled
Sent from my SM-J327P using Tapatalk
Related
WORK IN PROGRESS: This all started in a quest to stay locked, but have root and Magisk running on my phone, and eventually unlocking to install a custom kernel which wouldn't trip SafetyNet.
I've had to compromise on staying locked as unlocking the boot loader was ultimately necessary. As of this update to the guide, I have root, Magisk, and system-less Xposed working with each other. SafetyNet, however, is partially broken.
This is my experience on my new ZTE Axon 7 unlocked U.S. variant (A2017U), running build B29.
I'm certain that most of my problems had to do with the write-protected /system partition, as well as the encryption of fstab (verity check encryption/SE Linux status). I finally got some things working by using the method that follows, and I've opened this thread for anyone wishing to learn from what I've done, and possibly sharing with us, better methods of achieving this:
-> Device needs to have its bootloader unlocked, or else you will get a boot-loop into EDL mode. Use your prefered method for this.
-> TWRP 3.0.2.0
-> Last working SuperSU v2.65, which should install in systemless mode (tenfar's patched boot.img doesn't work for me).
-> A way to disable fstab encryption. I got it done using both: a custom kernel called Kali Kernel (also check this post for a stripped down version of the kernel) and through DrakenFX's script available here.
-> Magisk Manager, and Magisk flashable zip versions available here (look under downloads, v2.5 and v9 respectively as of this writing): [url]http://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445[/URL]
-> ADB shell (you can either use Terminal Emulator from the Play Store or ADB Shell on your computer.
After you have unlocked the bootloader, with any of the unlocking guides here on XDA (I used DrakenFX's zip, ultimately. God bless that dude!): Boot into TWRP, flash SuperSU v2.65 mentioned above.
Proceed to flash DrakenFX's boot loop patch.
Boot into the system.
Update SuperSU to the latest version through the Play Store (v2.79 as of this writing, should be automatic).
Open the SuperSU APK and update the SU binary at the prompt. Reboot the system.
Once booted back into the system: Open an ADB shell (either through terminal emulator, or through ADB shell on a computer) and type the following:
Code:
su
reboot disemmcwp
The phone will reboot.
Boot into TWRP and flash the Magisk v9 zip file.
Here, I would advise flashing the Kali kernel as well (if you're interested in passing SafetyNet validation, or even if you aren't as it worked for me this way). There is a stripped down version of the kernel available here (source post here).
Boot back into the system.
Once you're up, proceed to install the Magisk Manager.
If it is still showing up undetected then reinstall through the app, reboot into TWRP and flash the Magisk v9 .zip file as well, and reboot into the system.
Reboot system at the prompt.
A word of caution regarding Magisk's implementation of suHIDE: it can't be used with this method as it breaks root after a while, and apparently has no impact on a superuser system which is not a Magisk module. I am exploring Chainfire's suHIDE implementation in the coming days.
Hope it works for you all!
Edits: Updated guide to reflect my current research gains, and removed superfluous text. I will upload screenshots of my status as soon as I get back to my computer.
Updated screenshots to the current state.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Still no work for me. I can install it but when i reboot Magisk disapear. And i don't know why but magisk worked good before i do a factroy reset.
Alright, still working on streamlining my methods, and I've managed to get root, Magisk, and system-less Xposed playing nice together.
The next step was to try to not trip SafetyNet with this setup, and I've made some progress on that front. It involves installing the patched Kali kernel (as I've done so far) and suHIDE from Chainfire (next test, tomorrow).
I'll update the OP tomorrow, with screenshots!
Good for you!
Everything I try to install it didn't survive to reboot ðŸ™.
I make a fresh install and same. I don't know why. Last time I tried it worked.
I tried everything 😢
Znuf said:
Good for you!
Everything I try to install it didn't survive to reboot ðŸ™.
I make a fresh install and same. I don't know why. Last time I tried it worked.
I tried everything 😢
Click to expand...
Click to collapse
I've just updated the guide. Do you want to give it a shot and see whether it works for you?
It's exactly what I do many time, at least 10.
But it's never activated after boot. :sad:
If I found a way I'll post here
I found a way.
On unlocked phone.
Install supersu 2.65 from here https://download.chainfire.eu/921/SuperSU
Reboot system.
Update supersu via play store
Download magisk and magisk manager from here. http://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
Install magisk manager.
Install magisk v9.
Reboot when it prompt but Boot directly in twrp.
Flash magisk v9.
Reboot system.
This worked for me.
Znuf said:
I found a way.
On unlocked phone.
Install supersu 1.65
Reboot system.
Update supersu via play store
Download magisk and magisk manager from here. http://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
Install magisk manager.
Install magisk framwork
Reboot when it prompt but Boot directly in twrp.
Flash magisk v9
Reboot system.
This worked for me. 😀
Click to expand...
Click to collapse
I have a couple of doubts about your procedure before testing it twice:
1. Are you sure you have to install SU v1.65? Why not SU v2.65?
2. you are referring to the magisk framwork, but I do not find it. Were you referring to Xposed framework maybe?
It would be easier if could provide some links to the download pages, just to match versions.
Thanks
I update my post. Sorry for the poor precision. It was late. ?
Znuf said:
I update my post. Sorry for the poor precision. It was late.
Click to expand...
Click to collapse
Thanks for the clarification, I understand that when you say install Magisk v9, you rever to install within the Magisk manager app, and then later, booting directly to TWRP flashing the Magisk v9 zip file.
I have been experimenting with Safetynet helper and I have found that it doesn't pass when the phone is unlocked. As soon as I unlock the bootloader, the safetynet helper reports a CTS profile doesn't match. Even when using the stock boot and stock system without any root!!!!
Any thought on this???
blue skies
So Android Pay is working with this method?
JKSurf said:
So Android Pay is working with this method?
Click to expand...
Click to collapse
Not for me.
I am still experimenting, there must be a way.
---------- Post added at 17:30 ---------- Previous post was at 17:23 ----------
Znuf said:
I found a way.
On unlocked phone.
Install supersu 2.65 from here https://download.chainfire.eu/921/SuperSU
Reboot system.
Update supersu via play store
Download magisk and magisk manager from here. http://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
Install magisk manager.
Install magisk v9.
Reboot when it prompt but Boot directly in twrp.
Flash magisk v9.
Reboot system.
This worked for me.
Click to expand...
Click to collapse
I have done exactly that with the B29 ROM with stock boot and system. For some reason Magisk manager keep asking for Magisk v9 even after the whole process has been completed. I have root thanks to SuperSU, but safetynet helper test doesn't pass.
A better question is if you can pass the SafetyNet check apps.
I posted this in the thread that started this one, but with the official TWRP you can flash recent versions of SuperSU, not just 2.65 anymore (that was a limitation of the unofficial).
I know this thread relates to getting Magisk working, but unless there's a specific module you're looking to use, I don't see a benefit to using it for systemless root over SuperSU. I had tried to install it before using unofficial TWRP and had problems, but I think those, like the inability to install SuperSU past 2.65 we're due to faults with the unofficial TWRP. Official TWRP should install Magisk just fine (haven't cared to try it).
That said, if Android Pay is you're concern SuperSU might be the way to go. I am running SuperSU 2.79, Xposed 86.2, suhide 0.55, and Root Switch 1.3.3.2 and am able to pass both of the popular SN test apps (SafetyNet Helper and SafetyNet Playground). I don't use AP to know if that functions, but Pokémon GO, which also relies on SafetyNet runs just fine.
Also, as far as kernel goes, if you want one that doesn't have all the extra stuff the Kali NetHunter kernel does, there's a stock kernel patched for SafetyNet, kcal, and exFAT in this post of the same thread.
If you don't care about Xposed, SuperSU and Root Switch should be all you need to pass.
And as I mentioned in the other thread, this will likely all be rendered useless by the Nougat update hopefully coming next month.
The method I posted as an update in the OP the other day closely follows @Znuf's method, and all the relevant files are linked in the OP. Still a bit busy to experiment more, but this is how far I had gotten with the method I had posted, and, in theory, should work with suHIDE. Even the Kali Kernel I have linked to is the patched one without the extra tools.
With suHIDE my config should be similar to @-Duir-'s configuration, except that I've installed Xposed through Magisk (Xposed v87) instead.
I'll try this out and update it soon. Screenshots attached is my progress on the last update..
Has anyone tried to replicate this using a2017g? From what I can tell it should all work but I'm worried about flashing the bootloop fixer script that is designed for a2017u
H0lmEd said:
Has anyone tried to replicate this using a2017g? From what I can tell it should all work but I'm worried about flashing the bootloop fixer script that is designed for a2017u
Click to expand...
Click to collapse
The bootloop fixer script should work on all devices as it just disables forced encryption in your bootloader. Make backups and try it out. If you experience a problem just restore the backed-up boot partition.
I'm on 2017g no bootloop.
Erahgon said:
With suHIDE my config should be similar to @-Duir-'s configuration, except that I've installed Xposed through Magisk (Xposed v87) instead.
Click to expand...
Click to collapse
suhide will only work with Xposed 86.2 (which is provided in the same post).
Do those configurations support SafetyNet while Xposed modules are loaded? I don't want to softboot the phone when I am in a store and I have to pay.
Thanks
Oki said:
Do those configurations support SafetyNet while Xposed modules are loaded? I don't want to softboot the phone when I am in a store and I have to pay.
Thanks
Click to expand...
Click to collapse
Yep, Xposed modules still work, all you're toggling is root and no reboot required to disable/enable root. It's worth clarifying that while modules will still work, root apps obviously won't while disabled. Also, while root is disabled, Xposed installer will say Xposed isn't installed - as long as Xposed installer is green when root is enabled you're good.
Hi. i have using the epsilrom 4.2 (G850S)
today, I succeeded in installing lastest magisk. but Xposed SDK 21 version(topjohnwu) does not boot when installed.
how about you guys? i have been used before xposed-v87.1-samsung-5.0.x-By-dkcldark.
Have you ever used it normally? Please solve it T_T
Same here, has anyone found a way to get systemless xposed in our device yet?
I found a way, I will write the process later here, just I'm from phone now.
misaki_ayame said:
I found a way, I will write the process later here, just I'm from phone now.
Click to expand...
Click to collapse
So here the files:
https://www.dropbox.com/s/nkizsgr57ldts9f/xposed-v87.0-test.zip?dl=0
https://www.dropbox.com/s/7k65iqqdzb8pb1f/XposedInstaller_by_dvdandroid_29_04_17.apk?dl=0
https://www.dropbox.com/s/7qbnnruolfp6iqc/MagiskManager-v4.3.3.apk?dl=0
https://www.dropbox.com/s/4pltdlq1c9t8yyy/Magisk-v12.0.zip?dl=0
The xposed framework is based a mix of topjohnwu and dkcldark works.
Process:
Install Magisk Manager and flash the zip, and after that install Xposed Installer and flash the framework.
And the most important think:
Always make a backup before do anything.
Hello, I own a rooted HTC Desire 630 and I attempted to install Xposed Framework two times now, but both of my attempts failed miserably ( I got stuck at HTC boot screen, although I could access the recovery ) . So miserably that I had to relock the BL and flash the stock ROM. This is getting annoying, because I followed all the steps really carefully ( FROM HERE: bit(DOT)ly(SLASH)2oS8H1u ) and I used the correct ARM .zip file. Is there a software problem that doesn't allow this file to be flashed? Or do I have to use special Xposed files just like it's needed for Samsung?
I have to mention that I had unlocked BL, Superuser access and the latest TWRP beta made by @Captain_Throwback when doing the prcedure.
ANY HELP/FEEDBACK WOULD BE APPRECIATED
1. Root your phone
2. Install Magisk manager apk
3. Flash Magisk from recovery
4. Flash systemless Xposed framework
5. Install Xposed manager apk (modified for systemless xposed framework)
6. Install modules you want/ need.
7. Done!
mr_techno said:
1. Root your phone
2. Install Magisk manager apk
3. Flash Magisk from recovery
4. Flash systemless Xposed framework
5. Install Xposed manager apk (modified for systemless xposed framework)
6. Install modules you want/ need.
7. Done!
Click to expand...
Click to collapse
Did you attempt it? If yes, did it finish successfully?
KedBit said:
Did you attempt it? If yes, did it finish successfully?
Click to expand...
Click to collapse
I'll let the screenshots do the talking....
Screen1
Screen2
mr_techno said:
I'll let the screenshots do the talking....
That seems pretty convincing. I'll try it myself and confirm if it works for me.
Oh, and one more thing: Substratum. It's practically unusable for this device. Once you enter and finish the initial setup, you are prompted to grant it multiple app permissions, aswell as Superuser permissions. As soon as I hit GRANT on the Superuser pop-up, the phone reboots itself and the whole app data is cleared. Is it just my device that's operating like this or is Substratum unsupported?
Wondering if I should create a new thread on this if the problem persists.
Click to expand...
Click to collapse
Doesn't seem to work for me, Magisk just wouldn't install. Flashed the .zip in TWRP (v12.0) but after the reboot Magisk is still not installed.
So, in conclusion, the question still remains and the thread still awaits valid replies on how to do it.
KedBit said:
Doesn't seem to work for me, Magisk just wouldn't install. Flashed the .zip in TWRP (v12.0) but after the reboot Magisk is still not installed.
So, in conclusion, the question still remains and the thread still awaits valid replies on how to do it.
Click to expand...
Click to collapse
Use this twrp (TEST2) found on this link HERE, Install Magisk apk, flash the Magisk zip, search on XDA for SYSTEMLESS XPOSED FRAMEWORK on that thread you will find modified Xposed installer apk and ZIP file that you need to flash. While in recovery you can flash supersu zip, just google for that one. Aaaaaand you're done!
mr_techno said:
Use this twrp (TEST2) found on this link HERE, Install Magisk apk, flash the Magisk zip, search on XDA for SYSTEMLESS XPOSED FRAMEWORK on that thread you will find modified Xposed installer apk and ZIP file that you need to flash. While in recovery you can flash supersu zip, just google for that one. Aaaaaand you're done!
Click to expand...
Click to collapse
I got boot loop help me in geting stock rom for thid device please help give link
---------- Post added at 11:38 AM ---------- Previous post was at 11:26 AM ----------
KedBit said:
Hello, I own a rooted HTC Desire 630 and I attempted to install Xposed Framework two times now, but both of my attempts failed miserably ( I got stuck at HTC boot screen, although I could access the recovery ) . So miserably that I had to relock the BL and flash the stock ROM. This is getting annoying, because I followed all the steps really carefully ( FROM HERE: bit(DOT)ly(SLASH)2oS8H1u ) and I used the correct ARM .zip file. Is there a software problem that doesn't allow this file to be flashed? Or do I have to use special Xposed files just like it's needed for Samsung?
I have to mention that I had unlocked BL, Superuser access and the latest TWRP beta made by @Captain_Throwback when doing the prcedure.
ANY HELP/FEEDBACK WOULD BE APPRECIATED
Click to expand...
Click to collapse
Need stock rom of htc 630 please where u got
Give link
It does not work for me, tried everything.
How to edit in build.prob
I try to edit but after reboot on changes
Edited line are removed on every reboot ..
Any one know why and how to edit
DISCLAIMER: So if you're thinking this is the same as [GUIDE] TWRP, ROOT and XPosed - Only J320FN ! you're right, but you're also wrong. The process is somewhat the same of course, but i did not followed that guide nor use any of his files, i'll explain a lot of things, introduce you to magisk.... And here we're talking of the J320F and J320F/DS , which is the variant I have. Yes FN stuff works on F and F/DS most of the time, i'm aware.
With that out of th way let's talk business, I'm running stock 5.1.1 on my Samsung Galaxy J3 2016 J320F. This guide is for Stock ROM, custom roms come pre-rooted or use their own Root addon like Lineage, in the other hand, Samsung's stock roms based on Android L and M are not compatible with the official Xposed Framework from Rovo89, it will bootloop the device, instead we have to use a modified Xposed made by Wanam, more on that later.
I'm going to split this guide in 3 parts, first we're gonna install the custom recovery TWRP via Odin, the recovery will enable us to flash zip files which will allows us to Root the device and finally install Xposed.
How to Install TWRP on the J3 J320FThe tool to flash firmwares files on Samsung phones running Android is called Odin, and in order for Odin to recognize your phone in Download Mode (more on that later) it also needs some drivers. You can download both things from the following links:
Odin 3.10 from MEGA*
<Mod Edit> 4shared link removed
PLEASE READ [*]
1. Both files are in .RAR5, so you need to use WinRAR 5 or above to be able open them.
2. They also are password protected (sorry about that, but i offer them on several sites already). Password is: Tecnoriales
TWRP 3.0.2 for J320F - is a *.tar file, leave it as is, i mean don't extract it.
Before you star please charge your battery to 100%.
1. Install the Samsung Drivers.
2. In your J320F go to Settings>About phone>Software Info and tap 7 times on the Build Number, you'll see a toast message about "Developers Options" being now enabled.
3. Head back to Settings and now youll see Developer Options, enter there turn the toggle for Disable OEM Unlock, you'll face your security challenge, whatever it is you have (pin, password, pattern...).
NOTE: From now on leave Disable OEM Unlock thicked (what i mean is, if you turn the toggle to his original state will enable OEM Unlock). otherwise when you reboot your phone it won't boot again showing you the Custom Binary blocked by FRP Block" error in red letter. This can only be fixed Flashing the stock rom on your J320F, although you might not lose your data you will lose TWRP, root and Xposed. So, BE CAREFUL!
4. Turn off your phone and enter Download Mode pressing Vol+- Home and Power. You'll see a warning in the screen, accept it pressing Vol+.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
5. Plug your phone to the PC using your usb cable and give it some time for the driver to kick in if it is the very first time.
6. Run Odin as Admin. Check the COM Port is illuminated and you see Added in the log below.
7. Click the AP button and load the *.tar file of the TWRP.
8. Go to Options Tab and disable Auto-Reboot.
9. Press Start and wait Odin to say Pass in green. It's only a couple of seconds.
10. Unplug your phone from the PC and remove the battery and put it back. Now turn in on with the key combo: Vol+, Home and power.
Your J320F will boot straight to TWRP- Change the language from Russian to whatever you want and swipe to the right the slider in the bottom of the screen to enable the TWRP to modify the system. That's it.
How to ROOT the J3 J320F using SuperSu or MagiskGrab your rooting tool:
SuperSu - Good old SuperSu from Chainfire. Might hang from time to time and refuse to grant root access, kinda has bad temper.
or
Magisk + Magisk Manager APK. Newest and systemless root. Works like a charm, I used v16.0.
Before you star please charge your battery to 100%. You might want make a nandroid backup with TWRP before rooting.
1. Copy the *.zip file to the sdcard of your J320F
2. Boot into TWRP.
3. Go to Install and navigate to your sdcard to find and select the zip file.
4. Swipe to the right the slider control on the bottom of the screen to start the flashing process, which you can follow in the log.
5. Once it has finished touch on Reboot System and wait for the phone to boot. It might take a loot of time if you installed SuperSu.
You will have in your launcher the app of your root manager app. Test that root is working with root checker, Link2Sd, or whatever needs root access.
Note: If you rooted with Magisk and don't see Magisk Manager on your launcher, install the apk manually.
How to Install Xposed Framework on the J3 J320FAs I said at the beginning of this post, YOU CAN'T USE OFICIAL XPOSED on Samsungs stock roms (Android 5.x and 6.x) it will make your device loop on the boot process. This is due to the heavy modifications Samsung make to Android to turn it into his TouchWiz UI.
To install Xposed you need:
Xposed Framework by Wanam - The current (and probably final) version is 87.1, download the zip for ARM and SDK22. Optional: Also download Xposed Uninstaller zip in case you get a bootloop.
Xposed Installer App - Is an APK file attached to this thread, which by the way is the official Xposed Framework thread by Rovo89, don't used Xposed zips from there!
Before you star please charge your battery to 100%. You might want make a nandroid backup with TWRP before rooting.
1. Copy files to your sdcard. And install Xposed Installer.
2. Boot into TWRP, go to install and select the xposed-v87.1-sdk22-arm-custom-build-by-wanam-20161125 zip.
3. Swipe to the right the slider control on the bottom of the screen to start the flashing process and wait.
4. When it finishes select Reboot System. This will be a long boot, be patient.
After booting go to the Xposed Installer, or install it if you havent already, and see if Xposed is enabled. You should see the version and the samsung warning like in this pick
NOTE: DO NOT UPDATE XPOSED from the Xposed Installer app, it will flash official Xposed and you will get ****ed, i mean, a bootloop.
Xposed has tons, and tons, and tons of modules, most of them won't work on Samsung roms, again, due to all the changes Samsung made to Android in his stock roms. Always read carefully the info of any module before installing it, believe me they are state it when they wont work on Samsung roms. There's one module you should never even try to install:
It's called Gravity Box... The most powerful and famous module of all, and no, it wont work on your Samsung.
However, theres something called Wanam Xposed, made by the same dev from the modified Xposed we are using, it has some of the features you can find in GB.
All the above information is in this video i made. Video is in Spanish tough.
Sorry for my english, good luck and happy flashing.
can you make an English video please thx!
DeblaGaming said:
can you make an English video please thx!
Click to expand...
Click to collapse
Not happening.
DeblaGaming said:
can you make an English video please thx!
Click to expand...
Click to collapse
Seems pretty straight forward. A word of advice. When doing things like this for first time and if you don't know what to do rather follow text tutorials than videos. Easier to keep up...
Can twrp be updated with latest version or is this some custom twrp only for this model?
I haven't played a lot with flashing on samsungs so I'm doing my reading before. I have FN model. Is there some custom ROM that offers better experience or should I just root stock and get rid of bloatware and tweak it as I like with xposed?
the_bulk said:
Seems pretty straight forward. A word of advice. When doing things like this for first time and if you don't know what to do rather follow text tutorials than videos. Easier to keep up...
Can twrp be updated with latest version or is this some custom twrp only for this model?
I haven't played a lot with flashing on samsungs so I'm doing my reading before. I have FN model. Is there some custom ROM that offers better experience or should I just root stock and get rid of bloatware and tweak it as I like with xposed?
Click to expand...
Click to collapse
Theres no official TWRP for Speadtrum based 2016 J3s. There are newer versions for the J30F/FN i think, but atm i don't care/need it.
Since we don't have an Exynos or Qualcomm SoC, the custom rom scene doesn't look so good. Pretty much you have Lineage (MM & N), RR (N) and more recently DotOS (N), but they all suffer from pretty much the same problems give or take, in top of that most of the other roms are dead since the devs moved on to other phones, the ones I mentioned before don't really receive updates oftem. Right now im using stock with root and Xposed, is working fine, however im thinking about giving a second chance this rom: https://forum.xda-developers.com/galaxy-j3-2016/development/j2-pro-port-markus-rooted-t3657383 is stock MM, a port from the j210F wich i think is newer and somewhat better than this other j2 port: https://forum.xda-developers.com/galaxy-j3-2016/development/marshmallow-rom-j320f-t3623551
Can it flash newest SuperSu v2.82 flashable zip,through TWRP?
Odin Faild
Hi Guys!
I tried to flash the TWRP recovery on my J3 (2016) , but odin saids its faild could you help me with it please?
milewap said:
Can it flash newest SuperSu v2.82 flashable zip,through TWRP?
Click to expand...
Click to collapse
I flashed latest Magisk v18,with TWRP and yes TWRP vorks great tnx dev...for all :good:
Here's another one TWRP custom recovery,this one he has a bekap EFS....downloaded from 4pda ru site.All credits goes to them
SM-J320F-TWRP-F2FS.tar.md5
And here SM-J320FN-TWRP-F2FS.tar.md5 for FN but it does,on J320F i flashed today and works without problems.
Here it is PIT J320F if someone needs it...
Need help
mauriciognr said:
DISCLAIMER: So if you're thinking this is the same as [GUIDE] TWRP, ROOT and XPosed - Only J320FN ! you're right, but you're also wrong. The process is somewhat the same of course, but i did not followed that guide nor use any of his files, i'll explain a lot of things, introduce you to magisk.... And here we're talking of the J320F and J320F/DS , which is the variant I have. Yes FN stuff works on F and F/DS most of the time, i'm aware.
With that out of th way let's talk business, I'm running stock 5.1.1 on my Samsung Galaxy J3 2016 J320F. This guide is for Stock ROM, custom roms come pre-rooted or use their own Root addon like Lineage, in the other hand, Samsung's stock roms based on Android L and M are not compatible with the official Xposed Framework from Rovo89, it will bootloop the device, instead we have to use a modified Xposed made by Wanam, more on that later.
I'm going to split this guide in 3 parts, first we're gonna install the custom recovery TWRP via Odin, the recovery will enable us to flash zip files which will allows us to Root the device and finally install Xposed.
How to Install TWRP on the J3 J320FThe tool to flash firmwares files on Samsung phones running Android is called Odin, and in order for Odin to recognize your phone in Download Mode (more on that later) it also needs some drivers. You can download both things from the following links:
Odin 3.10 from MEGA*
<Mod Edit> 4shared link removed
PLEASE READ [*]
1. Both files are in .RAR5, so you need to use WinRAR 5 or above to be able open them.
2. They also are password protected (sorry about that, but i offer them on several sites already). Password is: Tecnoriales
TWRP 3.0.2 for J320F - is a *.tar file, leave it as is, i mean don't extract it.
Before you star please charge your battery to 100%.
1. Install the Samsung Drivers.
2. In your J320F go to Settings>About phone>Software Info and tap 7 times on the Build Number, you'll see a toast message about "Developers Options" being now enabled.
3. Head back to Settings and now youll see Developer Options, enter there turn the toggle for Disable OEM Unlock, you'll face your security challenge, whatever it is you have (pin, password, pattern...).
NOTE: From now on leave Disable OEM Unlock thicked (what i mean is, if you turn the toggle to his original state will enable OEM Unlock). otherwise when you reboot your phone it won't boot again showing you the Custom Binary blocked by FRP Block" error in red letter. This can only be fixed Flashing the stock rom on your J320F, although you might not lose your data you will lose TWRP, root and Xposed. So, BE CAREFUL!
4. Turn off your phone and enter Download Mode pressing Vol+- Home and Power. You'll see a warning in the screen, accept it pressing Vol+.
5. Plug your phone to the PC using your usb cable and give it some time for the driver to kick in if it is the very first time.
6. Run Odin as Admin. Check the COM Port is illuminated and you see Added in the log below.
7. Click the AP button and load the *.tar file of the TWRP.
8. Go to Options Tab and disable Auto-Reboot.
9. Press Start and wait Odin to say Pass in green. It's only a couple of seconds.
10. Unplug your phone from the PC and remove the battery and put it back. Now turn in on with the key combo: Vol+, Home and power.
Your J320F will boot straight to TWRP- Change the language from Russian to whatever you want and swipe to the right the slider in the bottom of the screen to enable the TWRP to modify the system. That's it.
How to ROOT the J3 J320F using SuperSu or MagiskGrab your rooting tool:
SuperSu - Good old SuperSu from Chainfire. Might hang from time to time and refuse to grant root access, kinda has bad temper.
or
Magisk + Magisk Manager APK. Newest and systemless root. Works like a charm, I used v16.0.
Before you star please charge your battery to 100%. You might want make a nandroid backup with TWRP before rooting.
1. Copy the *.zip file to the sdcard of your J320F
2. Boot into TWRP.
3. Go to Install and navigate to your sdcard to find and select the zip file.
4. Swipe to the right the slider control on the bottom of the screen to start the flashing process, which you can follow in the log.
5. Once it has finished touch on Reboot System and wait for the phone to boot. It might take a loot of time if you installed SuperSu.
You will have in your launcher the app of your root manager app. Test that root is working with root checker, Link2Sd, or whatever needs root access.
Note: If you rooted with Magisk and don't see Magisk Manager on your launcher, install the apk manually.
How to Install Xposed Framework on the J3 J320FAs I said at the beginning of this post, YOU CAN'T USE OFICIAL XPOSED on Samsungs stock roms (Android 5.x and 6.x) it will make your device loop on the boot process. This is due to the heavy modifications Samsung make to Android to turn it into his TouchWiz UI.
To install Xposed you need:
Xposed Framework by Wanam - The current (and probably final) version is 87.1, download the zip for ARM and SDK22. Optional: Also download Xposed Uninstaller zip in case you get a bootloop.
Xposed Installer App - Is an APK file attached to this thread, which by the way is the official Xposed Framework thread by Rovo89, don't used Xposed zips from there!
Before you star please charge your battery to 100%. You might want make a nandroid backup with TWRP before rooting.
1. Copy files to your sdcard. And install Xposed Installer.
2. Boot into TWRP, go to install and select the xposed-v87.1-sdk22-arm-custom-build-by-wanam-20161125 zip.
3. Swipe to the right the slider control on the bottom of the screen to start the flashing process and wait.
4. When it finishes select Reboot System. This will be a long boot, be patient.
After booting go to the Xposed Installer, or install it if you havent already, and see if Xposed is enabled. You should see the version and the samsung warning like in this pick
NOTE: DO NOT UPDATE XPOSED from the Xposed Installer app, it will flash official Xposed and you will get ****ed, i mean, a bootloop.
Xposed has tons, and tons, and tons of modules, most of them won't work on Samsung roms, again, due to all the changes Samsung made to Android in his stock roms. Always read carefully the info of any module before installing it, believe me they are state it when they wont work on Samsung roms. There's one module you should never even try to install:
It's called Gravity Box... The most powerful and famous module of all, and no, it wont work on your Samsung.
However, theres something called Wanam Xposed, made by the same dev from the modified Xposed we are using, it has some of the features you can find in GB.
All the above information is in this video i made. Video is in Spanish tough.
Sorry for my english, good luck and happy flashing.
Click to expand...
Click to collapse
Hey man youre the best guid i found on the internet
I have a j320f, stock rom, 5.1.1.OS and i rooted it twice with superus and magisk. I flashed em with twrp
At first the root checker said root is not installed correctly. Then i rooted it with kingo root and problem solved
I didnt install Xposed
But after some hours my phone restarted and kept bootlooping. I flashed the firmware... my phone worked again. Then again i rooted it but this time i made a backup.
I flashed magisk again (your exact version) and pressed root on kingo root again to make the root checke say the device is rooted
And the bootloop happened again
I wanna know that XposedFramework by wanam does prevent bootloop?
Or is there anything that can be done for preventing bootloop?
AminNadery said:
Hey man youre the best guid i found on the internet
I have a j320f, stock rom, 5.1.1.OS and i rooted it twice with superus and magisk. I flashed em with twrp
At first the root checker said root is not installed correctly. Then i rooted it with kingo root and problem solved
I didnt install Xposed
But after some hours my phone restarted and kept bootlooping. I flashed the firmware... my phone worked again. Then again i rooted it but this time i made a backup.
I flashed magisk again (your exact version) and pressed root on kingo root again to make the root checke say the device is rooted
And the bootloop happened again
I wanna know that XposedFramework by wanam does prevent bootloop?
Or is there anything that can be done for preventing bootloop?
Click to expand...
Click to collapse
You should use latest Magisk. If you install magisk you dont need anything else, if you dont see the magisk app after rebooting just go an download an install latest magisk manager from their thread. Stay away from kingo, use magisk, pay atention to what you are doing, youre using magisk and kingo at the same time, of course youll get a bootloop.
PD: Never quote OP.
Sorry for bothering again.
mauriciognr said:
You should use latest Magisk. If you install magisk you dont need anything else, if you dont see the magisk app after rebooting just go an download an install latest magisk manager from their thread. Stay away from kingo, use magisk, pay atention to what you are doing, youre using magisk and kingo at the same time, of course youll get a bootloop.
PD: Never quote OP.
Click to expand...
Click to collapse
Hey man thanks for the help...i did as you told and i installed magisk v19 using the TWRP.the magisk manager was installed after the reboot BUT the root checker said that the root was not installed properly. In fact the prompt and grant pop up never showed up. I had this problem with superSU too and that was the reason i used the kingo root. And only after that i could see the phone is rooted in root checker...i didnt installed kingo root this time. Thanks for the warning.
But what can i do? My apps does not have root permission.
I tried installing different versions of magisk. The latest v19 and the one u used v16.0. It didnt helped.
The app was not hibernated i checked but it was never in the running apps in application manager
SuperSU had the same problem.
What should i do?
Any solutions?
Youre the best. Thanks
AminNadery said:
Hey man thanks for the help...i did as you told and i installed magisk v19 using the TWRP.the magisk manager was installed after the reboot BUT the root checker said that the root was not installed properly. In fact the prompt and grant pop up never showed up. I had this problem with superSU too and that was the reason i used the kingo root. And only after that i could see the phone is rooted in root checker...i didnt installed kingo root this time. Thanks for the warning.
But what can i do? My apps does not have root permission.
I tried installing different versions of magisk. The latest v19 and the one u used v16.0. It didnt helped.
The app was not hibernated i checked but it was never in the running apps in application manager
SuperSU had the same problem.
What should i do?
Any solutions?
Youre the best. Thanks
Click to expand...
Click to collapse
First, perform a factory reset and flash your stock ROM (with odin), afterwards twrp and then magisk. Whatever problem you might have it will go away after a clean install of your rom. Use latest magisk.
Odin
Can I do this without computer???
After a few failed attempts (using Audio Modification module etc.) I found a way to get Viper working on the Mi 9. installed on the rooted Xiaomi.eu rom via TWRP and Magisk.
1. Download the Viper4Android_FX-v3.4.2.zip via Magisk but don't install it via Magisk
2. Boot to TWRP and flash the Viper zip and then adhere to the following:
- Press a volume button when prompted to do so
- Volume down (to choose vol key installation method)
- Vol up (for new 2.5.0.5)
- Vol up (for material, if preferred)
- Vol up (for system app)
- Vol up (for lib workaround to be installed)
3. Reboot
4. Via Magisk find and install "Init.d injector" and then reboot
Viper4Android should now be processing your audio!
Rommco05 said:
Installation from Magisk doesn't work? Just curious
Click to expand...
Click to collapse
Not the usual way. On my Pixel 2 XL, either the magisk module would work out of the box or using the Audio Modification Library module would make it work. I tried both of these ways, with no success the driver just wouldn't install. Tried the XDA labs apk, along with the Audio Modification Library, didn't work. Was even waiting a few minutes after boot as I know sometimes/some roms it takes a few minutes to initialise.
After lots of playing around of different versions, I tried that additional installation step of the lib workaround, which states that init.d support is needed too. With the use of that extra init.d module, it works!
I spent some time doing this and figured I'd help out others when they come to do it too!
I managed to install via Magisk?? Maybe due to a Magisk update?
*justintime* said:
I managed to install via Magisk?? Maybe due to a Magisk update?
Click to expand...
Click to collapse
Ahh yeah that's fair enough! Probably flashing via TWRP isn't necessary, so long as the additional init module is there too
Rommco05 said:
Installed init and after Viper4 from Magsik and didn't work, need flash ot trough twrp, today...
Click to expand...
Click to collapse
Ah tgats handy to know! My initial istructions remain valid then
Rommco05 said:
Installed init and after Viper4 from Magsik and didn't work, need flash ot trough twrp, today...
Click to expand...
Click to collapse
Funny with twrp it wasn't working for me...... Magisk had an update. "Check updates canary build' in manager.
And it was a straight away. Flash.... Only no equalizer in usb/dock out though for Android auto
Rommco05 said:
btw after last Magisk update I was able install Viper4 over manager. I also installed that last option (fix)
Click to expand...
Click to collapse
Thanks, that's handy to know!
I simply couldn't get viper4android to work and didn't have much luck with the init.d injector... I ended up following your steps and installed a custom kernel and emulated init.d via the kernel auditor app.... Now its working perfectly!
Have any of you tried the ainur sauron mod on the mi 9?
hi is it possible to get viper4android work with magisk flash? because i don't want twrp and loosing encryption.
when i flash trough magisk viper4android app doesn't appear?
thank you
(sorry for bad english)
dffhgg said:
hi is it possible to get viper4android work with magisk flash? because i don't want twrp and loosing encryption.
when i flash trough magisk viper4android app doesn't appear?
thank you
(sorry for bad english)
Click to expand...
Click to collapse
Possibly...
Have you tried rebooting? Otherwise I'm unsure I'm afraid....
cd993 said:
Possibly...
Have you tried rebooting? Otherwise I'm unsure I'm afraid....
Click to expand...
Click to collapse
yes for sure i rebooted many times but no success..
always viper4android doesn't appear
i also tried install via apk download viper4android then install there also not work, after reboot it reask to install driver.
dffhgg said:
yes for sure i rebooted many times but no success..
always viper4android doesn't appear
i also tried install via apk download viper4android then install there also not work, after reboot it reask to install driver.
Click to expand...
Click to collapse
And this is with the init d module as well?
with init.d injector module from magisk? yes i installed it alredy
dffhgg said:
with init.d injector module from magisk? yes i installed it alredy
Click to expand...
Click to collapse
And you're on the latest eu rom?
Hmm all I can suggest is to remove fully uninstall viper, the init d module and make sure no other audio mods are installed, reboot, then install viper again (ensuring to choose yes to the lib workaround) and the init d module.
If that doesn't work, then unfortunately I'm out of ideas as I tried lots 9f things and this was the only method that worked for me.
Good luck
yes i'm on 10.2.17
i will give it a try and let you know.
hope will work thank you
dffhgg said:
yes i'm on 10.2.17
i will give it a try and let you know.
hope will work thank you
Click to expand...
Click to collapse
I'm on the latest weekly 9.4.11, if that makes any difference
can i flash this version whithout data loss?
i tried reinstall everything but no succes
hi guys my problem is solved!
what i did:
change selinux to permissive with this tool: Kernel SEPolicy patcher https://zackptg5.com/android.php
now viper4android is detect driver its full work!
dffhgg said:
hi guys my problem is solved!
what i did:
change selinux to permissive with this tool: Kernel SEPolicy patcher https://zackptg5.com/android.php
now viper4android is detect driver its full work!
Click to expand...
Click to collapse
Great! I'll save that just in case I ever need it
keep getting the following error
Checking for Digest files
Skipping Digest check: no digest file found
on twrp 3.3.0 b8 and latest EU rom