Related
I use to use my honor 5x l22 on RR (5.8.5).
Lately after a member in the forum said CM13 has better performance& battery backup, i flashed CM13 expecting lot.
It seems now i want to get back to RR.
But when i wiped and flashed RR, TWRP got stuck on ""PATCHING SYSTEM IMAGE UNCONDITIONALLY"
I restored the backup i earlier had on EMUI (B 320).
Now i tried again the same problem persists.
I searched here as well googled. But i could understand nothing (It was something related storage format issue f2fs or something lke that).
Edit (Update) : I flashed Flyme 6 which works on Android 6. So Marshmallow ROMs work good. Problem is with Nougat ROMs
Can someone kindly help me with this in a nooby way?
I would be grateful.
hemanth.k said:
I use to use my honor 5x l22 on RR (5.8.5).
Lately after a member in the forum said CM13 has better performance& battery backup, i flashed CM13 expecting lot.
It seems now i want to get back to RR.
But when i wiped and flashed RR, TWRP got stuck on ""PATCHING SYSTEM IMAGE UNCONDITIONALLY"
I restored the backup i earlier had on EMUI (B 320).
Now i tried again the same problem persists.
I searched here as well googled. But i could understand nothing (It was something related storage format issue f2fs or something lke that).
Edit (Update) : I flashed Flyme 6 which works on Android 6. So Marshmallow ROMs work good. Problem is with Nougat ROMs
Can someone kindly help me with this in a nooby way?
I would be grateful.
Click to expand...
Click to collapse
You may need to update TWRP, I know sometimes you require new version for Nougat on some phones
swukjay said:
You may need to update TWRP, I know sometimes you require new version for Nougat on some phones
Click to expand...
Click to collapse
That didn't work. I tried flashing Lineage /. It worked.
swukjay said:
You may need to update TWRP, I know sometimes you require new version for Nougat on some phones
Click to expand...
Click to collapse
I had a similar problem so I went ahead and flashed the newer Twrp updating mine from v3.0.00, then my problems started. I ended up reflashing back to it after the update screwed my phone. I run nougat roms on ,3.0.00 no problem guess I will leave well enough alone on my L24.
Hey all,
I've just ordered a Le Max 2 from some mob in China. When it arrives in 2021 I hope to install a clean Oreo rom.
The problem is I'm new to all this jazz. I can follow a walkthrough successfully, and without killing the cat etc, but I don't know which walkthrough/guide to follow!
Is there a stock Oreo rom for the Le Max 2? Is 'stock' the right word here? I mean from Android/Google.
If not, is the Lineage rom ok?
I just want a clean phone, no crap installed, higher version of Android the better.
Also, I noticed a firmware page. Do I have to update my firmware first? Or after Rom installs?
thanks all
ausmomo said:
Hey all,
I've just ordered a Le Max 2 from some mob in China. When it arrives in 2021 I hope to install a clean Oreo rom.
The problem is I'm new to all this jazz. I can follow a walkthrough successfully, and without killing the cat etc, but I don't know which walkthrough/guide to follow!
Is there a stock Oreo rom for the Le Max 2? Is 'stock' the right word here? I mean from Android/Google.
If not, is the Lineage rom ok?
I just want a clean phone, no crap installed, higher version of Android the better.
Also, I noticed a firmware page. Do I have to update my firmware first? Or after Rom installs?
thanks all
Click to expand...
Click to collapse
Hey. Welcome to the group.
There's no stock ROM for Oreo. We only have EUI 5.8/5.9 (Marshmallow). Lineage is okay, but as of now Oreo custom ROMs have bugs. One is low mic volume in calls, another is that you can't use Slow Motion Mode in modded GCam. In a new Oreo Custom ROM (Dirty Unicorn) it has GPS and Fingerprint bug, not sure about low mic volume but the Slow Motion Mode bug is still there (because of OSS HALs)
I suggest you flash Nougat if you want minimal bugs.
I think Marshmallow custom ROMs have no bugs at all (someone confirm) but the security patch is old.
You don't have to be on latest stock ROM, just flash the latest TWRP and start flashing ROMs.
Good luck!
ausmomo said:
Hey all,
I've just ordered a Le Max 2 from some mob in China. When it arrives in 2021 I hope to install a clean Oreo rom.
The problem is I'm new to all this jazz. I can follow a walkthrough successfully, and without killing the cat etc, but I don't know which walkthrough/guide to follow!
Is there a stock Oreo rom for the Le Max 2? Is 'stock' the right word here? I mean from Android/Google.
If not, is the Lineage rom ok?
I just want a clean phone, no crap installed, higher version of Android the better.
Also, I noticed a firmware page. Do I have to update my firmware first? Or after Rom installs?
thanks all
Click to expand...
Click to collapse
Use google my friend flashing roms and learning about adb and fastboot is quite fun (well for me it is ). It's quite straight forward, you just need to have the proper software and drivers.
Lineage rom is good, it's updated quite frequently and most of the time has minimal bugs. go with nougat as my colleague suggested. Also i think it's ok to stay with just stock firmware Eui is quite nice i guys.
Just remember to backup everything and save it in a safe place before trying something for the first time If you are afraid of doing something and want a quick answer you can PM me, i will try to answer asap
ausmomo said:
Hey all,
I've just ordered a Le Max 2 from some mob in China. When it arrives in 2021 I hope to install a clean Oreo rom.
The problem is I'm new to all this jazz. I can follow a walkthrough successfully, and without killing the cat etc, but I don't know which walkthrough/guide to follow!
Is there a stock Oreo rom for the Le Max 2? Is 'stock' the right word here? I mean from Android/Google.
If not, is the Lineage rom ok?
I just want a clean phone, no crap installed, higher version of Android the better.
Also, I noticed a firmware page. Do I have to update my firmware first? Or after Rom installs?
thanks all
Click to expand...
Click to collapse
What I can say from my personal experience. First, stock EUi is a crap. Also, abandoned, since LeEco company does not exist anymore. Second, 7.1 or 8.1? I would recommend Lineage 15.1 (Oreo 8.1). It's most stable for me. I found any other rom based on Lineage more buggy than stock Lineage 14.1 is stable too, but why to choose older Android?
Install procedure is pretty easy. You need to unlock bootloader, flash twrp, then flash rom + gapps, that's all.
BTW as you can see, there may be many opinions. But it's not risky to test various custom roms and choose the one that is the best for you. Don't hestitate to try many roms, it's not a pain at all. Actually, it's a fun.
Hello, I have just bought a Mi Pad 4; when it arrived, I immediately requested bootloader unlock and now i am waiting (290 hours left)...
In the meanwhile, I was searching which rom could I install for this device, I am an italian user so i was thinking to install stable MIUI 10 from MIUI.it, instead of the stable from xiaomi.eu because it is surely well translated and it is smaller then the EU rom, but I did not understand the bootloader and recovery thing.
Apparently if I install xiaomi.eu rom with their TWRP, i will also install a custom bootloader that could lead to problems if i want to install MIUI.it rom afterwards, so my question is if there are there problems with the stable MIUI10 of MIUI.it + MIUI.it TWRP, is it stable enough for daily use or it's better the xiaomi.eu version + their TWRP?
I recommend 8.1 based Mokee rom.
That's the most stable at the moment for me, far better than MIUI based roms.
sacca25 said:
I recommend 8.1 based Mokee rom.
That's the most stable at the moment for me, far better than MIUI based roms.
Click to expand...
Click to collapse
Thank you for the advice, but for now I am appreciating a lot the MIUI 10 interface and its usability, so I would like to use this for now, but in the future I will surely try Mokee rom
I have found the answer for my questions: when I install the italian MIUI, if i encounter problems with it, i can switch to xiaomi.eu flashing the stock chinese stable rom with the tool called MiFlash, after that I can install xiaomi.eu rom with TWRP;
but if i want to install an AOSP rom, I can install it over every MIUI version obviously wiping data, cache and dalvik-cache of the previous rom through TWRP.
Another italian here guys...if you want I tried the HavocOS (it's the only one that has "official" support like Mokee, it's Android Pie with some custom settings) and except for navbar gestures that didn't work in landscape I didn't find any bug!
SedyBenoitPeace said:
Another italian here guys...if you want I tried the HavocOS (it's the only one that has "official" support like Mokee, it's Android Pie with some custom settings) and except for navbar gestures that didn't work in landscape I didn't find any bug!
Click to expand...
Click to collapse
Yes, I have also seen this ROM and the reviews under the post are good, anyway for now I will install the MIUI 10 of MIUI.it (some other day and the bootloader will be unlocked), then surely I will try also some rom AOSP-based in the future
i have followed the forum of @Alann200 as it said i had a oreo version based rom i had asop extended v5.8 mido wit GAPPS installed after completing the setup i went back to recovery to flash the kali nethunter file after it said flash successful then restarted to system but then it was stuck on bootloop plz guide (for further contact reddit u/ghouse_mohi)
Ghouse_Mohi said:
i have followed the forum of @Alann200 as it said i had a oreo version based rom i had asop extended v5.8 mido wit GAPPS installed after completing the setup i went back to recovery to flash the kali nethunter file after it said flash successful then restarted to system but then it was stuck on bootloop plz guide (for further contact reddit u/ghouse_mohi)
Click to expand...
Click to collapse
Hi,
Did you try to contact the dev through the ROM's thread ?
And also did you clean wiped your device before flashing kali ?
Did you have an up to date TWRP when flashing ?
Because bootloops can either be caused by you flashing the file wrong or the ROM itself. If you did everything correctly it comes from the ROM, and the dev will be the only person able to find what's wrong with its build.
Thx but I have figured it out
Raiz said:
Hi,
Did you try to contact the dev through the ROM's thread ?
And also did you clean wiped your device before flashing kali ?
Did you have an up to date TWRP when flashing ?
Because bootloops can either be caused by you flashing the file wrong or the ROM itself. If you did everything correctly it comes from the ROM, and the dev will be the only person able to find what's wrong with its build.
Click to expand...
Click to collapse
I have figured out that you can install kali nethunter by magisk modules....:good:
Hi all,
I have unlocked my device and is currently running LineageOS 16 from OpenKirin. There are a few things which does not work, like the camera app that comes with the OS as well as the notch, where icons goes beyond the notch. Someone suggested I try the OpenKirin Rom and that is how I got that specific ROM on my device.
I was wondering are there maybe other ROMS for this device? Like the one's mentioned in the article below?
https://www.getdroidtips.com/best-custom-rom-huawei-p20-lite/
It took me a long while to get everything running on this device, Magisk and EdXposed. So I just don't want to go and wipe my OS just to try 4 ROMS that does not work. Sure you have app backup for that but it would mean doing everything over almost on the device.
Any advice would be greatly appreciated. Also I am rather new to custom ROMS so please bear with me!
MayhemIam said:
Hi all,
I have unlocked my device and is currently running LineageOS 16 from OpenKirin. There are a few things which does not work, like the camera app that comes with the OS as well as the notch, where icons goes beyond the notch. Someone suggested I try the OpenKirin Rom and that is how I got that specific ROM on my device.
I was wondering are there maybe other ROMS for this device? Like the one's mentioned in the article below?
https://www.getdroidtips.com/best-custom-rom-huawei-p20-lite/
It took me a long while to get everything running on this device, Magisk and EdXposed. So I just don't want to go and wipe my OS just to try 4 ROMS that does not work. Sure you have app backup for that but it would mean doing everything over almost on the device.
Any advice would be greatly appreciated. Also I am rather new to custom ROMS so please bear with me!
Click to expand...
Click to collapse
I don't know bro but I have the same question too. U installed one of the listed roms from the link you posted?
MayhemIam said:
Hi all,
I have unlocked my device and is currently running LineageOS 16 from OpenKirin. There are a few things which does not work, like the camera app that comes with the OS as well as the notch, where icons goes beyond the notch. Someone suggested I try the OpenKirin Rom and that is how I got that specific ROM on my device.
I was wondering are there maybe other ROMS for this device? Like the one's mentioned in the article below?
https://www.getdroidtips.com/best-custom-rom-huawei-p20-lite/
It took me a long while to get everything running on this device, Magisk and EdXposed. So I just don't want to go and wipe my OS just to try 4 ROMS that does not work. Sure you have app backup for that but it would mean doing everything over almost on the device.
Any advice would be greatly appreciated. Also I am rather new to custom ROMS so please bear with me!
Click to expand...
Click to collapse
There is nothing like perfect Custom ROM. It is highly dependent upon the requirement of the user and his likes/dislikes. Every ROM has its importance and downsides. You can try flashing multiple ROMs to find the ROM which is suitable and best for you. There is no Custom ROM that is 100% bug free (it depends, among other things, on model, FW built number etc. etc.).
If you don’t prefer EMUI,* choose Havoc OS , AOSP Extended or LineageOS.
If you "hate" Google and Google's bloatware (like me ) only, you can simply rebrand your phone to chinese Nova 3e (among other things, better battery life, lower data consumption etc.)
Or, choose Custom ROM based on Stock with KangVip settings ( to get away from GAPPS) , stable enough to be used as your daily driver.
Availability of custom ROMs for Kirin devices is scarce.
Are you bored in quarantine?
Ion
ion-2.5b-arm64-ab-gapps-Lite-2.1 GB
Android 10.0.0 https://drive.google.com/file/d/1q3dgQChf7ltB5h9QzvqXuGCeijUUKVG-/view
Colt OS
https://sourceforge.net/projects/am...ial-20200103-arm64-ab-vanilla.img.xz/download
Havoc OS
https://sourceforge.net/projects/ex...0-20191225-ARM64AB-Unofficial.img.xz/download
CR Droid (EMUI 8?)
https://forum.xda-developers.com/pr...ice-development/official-crdroid-4-4-t3813104
DOT OS (EMUI 8?)
https://sourceforge.net/projects/dotos-2-x/files/dotGSI/09062018/
AOSP
https://github.com/phhusson/treble_experimentations/releases/tag/v112
AOSP-2
https://github.com/phhusson/treble_experimentations/releases/tag/v109
EvolutionX (similar to Pixel Experience)
https://androidfilehost.com/?fid=1395089523397918976
Resurrection Remix O (EMUI 8)
https://forum.xda-developers.com/pr...pment/gsi-resurrection-remix-o-6-1-0-t3811299
n.sim said:
I don't know bro but I have the same question too. U installed one of the listed roms from the link you posted?
Click to expand...
Click to collapse
Hi,
No i have not tried one of the recommended in that list i provided. It took me a very long time to get the phone unlocked! Then more bricks, soft and hard through the process :crying:
Magisk was not as hard to install but EdXposed was, and I also got my device stuck on a boot loop trying to get EdXposed to run. So yeah I took me a while to get it working.
-Alf- said:
Are you bored in quarantine?
Click to expand...
Click to collapse
hehe well i'm just picky in getting the device to work right! Thank you for the detailed response Alf!
-Alf- said:
Are you bored in quarantine?
Ion
ion-2.5b-arm64-ab-gapps-Lite-2.1 GB
Android 10.0.0 https://drive.google.com/file/d/1q3dgQChf7ltB5h9QzvqXuGCeijUUKVG-/view
Colt OS
https://sourceforge.net/projects/am...ial-20200103-arm64-ab-vanilla.img.xz/download
Havoc OS
https://sourceforge.net/projects/ex...0-20191225-ARM64AB-Unofficial.img.xz/download
CR Droid (EMUI 8?)
https://forum.xda-developers.com/pr...ice-development/official-crdroid-4-4-t3813104
DOT OS (EMUI 8?)
https://sourceforge.net/projects/dotos-2-x/files/dotGSI/09062018/
AOSP
https://github.com/phhusson/treble_experimentations/releases/tag/v112
AOSP-2
https://github.com/phhusson/treble_experimentations/releases/tag/v109
EvolutionX (similar to Pixel Experience)
https://androidfilehost.com/?fid=1395089523397918976
Resurrection Remix O (EMUI 8)
https://forum.xda-developers.com/pr...pment/gsi-resurrection-remix-o-6-1-0-t3811299
Click to expand...
Click to collapse
If I currently have LineageOS 16 (Aug 2020 ver) can I use the AB partition? I presume so because the Android version currently is 9. I am looking to try HavocOS.
Thank you Alf man you have helped me a lot with all my questions!
MayhemIam said:
If I currently have LineageOS 16 (Aug 2020 ver) can I use the AB partition?
Click to expand...
Click to collapse
AB or A-only depend on EMUI version : 9.1 = AB, 8.0 = A-only.
Good luck!
n.sim said:
I don't know bro but I have the same question too. U installed one of the listed roms from the link you posted?
Click to expand...
Click to collapse
Don't bother trying any one of those ROMs listed in that post. I wasted a whole day trying to flash a ROM specified by that website. Look specifically for ROMs on XDA website.
I get more help here, and it has been tested already on our devices.
MayhemIam said:
Don't bother trying any one of those ROMs listed in that post. I wasted a whole day trying to flash a ROM specified by that website. Look specifically for ROMs on XDA website.
I get more help here, and it has been tested already on our devices.
Click to expand...
Click to collapse
I flashed treble gsi rooted and with gapps on my ane-lx1 and everything works except fingerprint unlock after first reboot. But fingerprint gestures still working
I recommend gsi ...
I am working on it, the inverse ingeniery is the way, I think