Not really getting support in the magisk section. - LG V30 Questions & Answers

I'll ask here. Has any V30 owner able to successfully flash magisk 19.1 or the newer 19.2?
I flashed both but can't get past the V30 logo.

BROKEN1981 said:
I'll ask here. Has any V30 owner able to successfully flash magisk 19.1 or the newer 19.2?
I flashed both but can't get past the V30 logo.
Click to expand...
Click to collapse
Which rom are you using?
I've had no issues with them.

Same here. No problems installing for me.

tech_infinity said:
Which rom are you using?
I've had no issues with them.
Click to expand...
Click to collapse
Odd, I'm using stock. I even flashed the uninstaller, rebooted that brought me to fastboot, then selected restart, booted into TWRP and tried again. Since it seems it works for the V30, I'll start a fresh flash and just restore data if I can get Magisk to update.
Sent from my LG-H932 using XDA Labs

Thanks for verifying that Magisk works. I'm updated with no issues.
Thanks guys!
Sent from my LG-H932 using XDA Labs

BROKEN1981 said:
Thanks for verifying that Magisk works. I'm updated with no issues.
Thanks guys!
Sent from my LG-H932 using XDA Labs
Click to expand...
Click to collapse
Pay it forward, man. Finish the thread by telling us how you overcame the problem!

ldeveraux said:
Pay it forward, man. Finish the thread by telling us how you overcame the problem!
Click to expand...
Click to collapse
I clean flashed my ROM and restored my stuff via titanium backup.
Sent from my LG-H932 using XDA Labs

no issue with magisk so far, clean flash is worth trying. or try install the older one then update it within magisk app

immns said:
no issue with magisk so far, clean flash is worth trying. or try install the older one then update it within magisk app
Click to expand...
Click to collapse
Exactly.
For posterity purposes; I had trouble flashing newer versions of Magisk (newer than 18.1). But... it turns out the problems could have been
resolved by installing the Magisk manager apk, the same way you would install any apk.
I haven't gone back and done re-testing or anything, like most of us, I just wanted to get something to work, period. But along the way of this process, the flashing of Magisk later versions didn't show up after booting the phone, even though 'success' was indicated in TWRP.
But installing the Manager apk, then rebooting, it would show up, sometimes twice. Then reboot again, then only one Magisk app with both Magisk and Manager in it...
But as immns says, you can definitely just start with flashing 18.x, and then upgrade both within the application and that will work, I've done it that way also.
Cheers

Related

TWRP 2.4 is out

Hello fellow Touchpad enthusiasts,
I happened to see TWRP has a version 2.4 available to us - http://goo.im/devs/OpenRecovery/tenderloin
I saw it posted in other device forums, but not ours so thought I'd share the news.
About all I can tell you is it installed without any major problems. Nothing else tested other than boot into it and reboot to CM 10. I just moved ver 2.3 and copy/renamed 2.4 into same directory. Only problem encountered was old ver permissions were messed up so had to mess around before I was able to move the old ver. That and I reset permission on new ver to match - forget what I modeled it after - the other recovery uImage since I have them both installed.
As always ymmv.
Neil
It would be easier for you to install from goo manager, just tap install openrecoveryscript and your done.
Sent from my Nexus 4 using Tapatalk 2
BIGSimon said:
It would be easier for you to install from goo manager, just tap install openrecoveryscript and your done.
Sent from my Nexus 4 using Tapatalk 2
Click to expand...
Click to collapse
Hah - good point - dunno why I didn't do it that way
thx for the reminder for next time I suppose.
Neil
BIGSimon said:
It would be easier for you to install from goo manager, just tap install openrecoveryscript and your done.
Sent from my Nexus 4 using Tapatalk 2
Click to expand...
Click to collapse
Good idea, thanks dawg
I read about incompatibility problems between TWRP 2.4.3.0 and TouchPad.
But does anybody know what about the new twrp-2.4.4.0-tenderloin?
Please fulfill:
TWRP v.________ and ROM ToolBox
CWM v._________ and GooManager
Edit:
Above is false. You should use ...
... TWRP with GooManager and ...
... CWM with ROM ToolBox!
I will stick with CWM. Seems stable enough, it works as it should, and I don't mind to scroll through using my volume rocker.
MerenQue said:
I read about incompatibility problems between TWRP 2.4.3.0 and TouchPad.
But does anybody know what about the new twrp-2.4.4.0-tenderloin?
Please fulfill:
TWRP v.________ and ROM ToolBox
CWM v._________ and GooManager
Click to expand...
Click to collapse
I updated to 2.4.4 but haven't tested yet, but lots of people were having issues on the Nexus 4 on 2.4.3.0 and after the update nobody has any problems. I know the touchpad is a different animal but i bet it works now. No way I'm ever going back to cwm. Twrp has the best setup & all the right features.
Everytime I tried to flash a zip for a bug fix (headphone detection glitch, etc) it would fail in TWRP. Every time. So I went back to CWM. Goomanager is completely unreliable in regards to finding rom updates, etc.
bchampy said:
Everytime I tried to flash a zip for a bug fix (headphone detection glitch, etc) it would fail in TWRP. Every time. So I went back to CWM. Goomanager is completely unreliable in regards to finding rom updates, etc.
Click to expand...
Click to collapse
Are you using the latest version? Twrp is working perfectly for me.
Update:
I take my message back. I backed up, did a factory reset, restored my backup, & everything is there except it twrp didn't restore my app data nor my system settings data.
Update:
I just flashed shumash's new build with success. So flashing in twrp is now working fine for me. Going to have to investigate why my restore didn't fully work on my previous post.
Is anybody else using the latest Twrp?
New twrp 2.5 out. Haven't tested it out yet. But it looks like they fixed the restore issues.
Sent from my GT-P3110 using xda app-developers app
gradular said:
New twrp 2.5 out. Haven't tested it out yet. But it looks like they fixed the restore issues.
Sent from my GT-P3110 using xda app-developers app
Click to expand...
Click to collapse
Thanks but I going to wait for some feedback after the problems there have been with previous versions and not just on our Roms. I wished they had responded on there thread here after the notifications they were given.
Sent from my Transformer Prime TF201 using Tapatalk 2
gradular said:
New twrp 2.5 out. Haven't tested it out yet. But it looks like they fixed the restore issues.
Sent from my GT-P3110 using xda app-developers app
Click to expand...
Click to collapse
Nice! Let us know how it goes for you. I had a few issues with 2.4.4 but my last couple backups and restores worked great. Thanks for letting us know!
And it don't work. Its worse. It restored 5 apps out off 250... It booted though. But i also had a cwm backup done right before so its all good.
Sent from my cm_tenderloin using xda app-developers app
So did you have 2.4.4 before & if so did you have success with that?
I did and it had the same issue but I was only missing 20 apps or so
Sent from my GT-P3110 using xda app-developers app
I tried twrp before and not only could I not do good backups but also screwed my tablet to the point I had to resort to this: http://forum.xda-developers.com/showthread.php?t=
Thank goodness for cwm.
http://forum.xda-developers.com/showthread.php?t=1426244

[Q] lost root access

So, I was having a couple of issues with xnote 13 and decided to just dirty flash it. That turned out great. However, I lost root access? Still have twrp. Confused...
Going to try to reroot as is...I hope thats all right?
Thx!
rosystreasures said:
So, I was having a couple of issues with xnote 13 and decided to just dirty flash it. That turned out great. However, I lost root access? Still have twrp. Confused...
Going to try to reroot as is...I hope thats all right?
Thx!
Click to expand...
Click to collapse
EDIT: just tried to install CF root 900p and 9005, no go.
rosystreasures said:
So, I was having a couple of issues with xnote 13 and decided to just dirty flash it. That turned out great. However, I lost root access? Still have twrp. Confused...
Going to try to reroot as is...I hope thats all right?
Thx!
Click to expand...
Click to collapse
I believe you just need to flash the SuperSU zip in twrp again and it fixes this. It has happened to me before and it worked.
Sent from my SM-N900P using Tapatalk
xbmoyx said:
I believe you just need to flash the SuperSU zip in twrp again and it fixes this. It has happened to me before and it worked.
Sent from my SM-N900P using Tapatalk
Click to expand...
Click to collapse
Well, went into recovery, it was android recovery again. Guess I have to start over.
rosystreasures said:
Well, went into recovery, it was android recovery again. Guess I have to start over.
Click to expand...
Click to collapse
I've never seen this. You said you were having problems with X note? What type of problems? Over the years I've come to realize you should never dirty flash a ROM unless its an update by a Dev and he instructs that a dirty flash is OK.
Sent from my SM-N900P using Tapatalk
xbmoyx said:
I've never seen this. You said you were having problems with X note? What type of problems? Over the years I've come to realize you should never dirty flash a ROM unless its an update by a Dev and he instructs that a dirty flash is OK.
Sent from my SM-N900P using Tapatalk
Click to expand...
Click to collapse
My power menu disapperared. Everything went fine until I installed wanam xposed enable 4 way power menu. The power menu dissappeared again. need to start a new thead on it.

[Q] Root Issue for Xolo q800

I earlier rooted my cell and it was working fine till yesterday. I reinstalled the DogeMod Rom but now my Xposed Module is not working. I installed root checker from the playstore but it's showing that I am not rooted. I can go into the recovery and have tried flashing supersu files, xposed modules, twrp recovery but still I am unable get it rooted again. I believe that this is a rooting issue only.
Kindly troubleshoot my problem.
Thanking in anticipation.
Manipal said:
I earlier rooted my cell and it was working fine till yesterday. I reinstalled the DogeMod Rom but now my Xposed Module is not working. I installed root checker from the playstore but it's showing that I am not rooted. I can go into the recovery and have tried flashing supersu files, xposed modules, twrp recovery but still I am unable get it rooted again. I believe that this is a rooting issue only.
Kindly troubleshoot my problem.
Thanking in anticipation.
Click to expand...
Click to collapse
Do you have a custom recovery?
christi9503 said:
Do you have a custom recovery?
Click to expand...
Click to collapse
Yes Sir, I can go in the recovery, I tried flashing SuperSu files and other files to get my device rooted but to no effect.
I also tried to root it via SP Flash but still it is showing not rooted
Manipal said:
Yes Sir, I can go in the recovery, I tried flashing SuperSu files and other files to get my device rooted but to no effect.
I also tried to root it via SP Flash but still it is showing not rooted
Click to expand...
Click to collapse
@Manipal
Try flashing this guy.
Also format cache partition and dalvik cache.
christi9503 said:
@Manipal
Try flashing this guy.
Also format cache partition and dalvik cache.
Click to expand...
Click to collapse
Encryption Unsuccessful
Encryption was interrupted and the data on your phone is no longer accessible. Reset your phone now. -_-
Manipal said:
Encryption Unsuccessful
Encryption was interrupted and the data on your phone is no longer accessible. Reset your phone now. -_-
Click to expand...
Click to collapse
When did you get this after clearing cache or after flashing the su update?
christi9503 said:
When did you get this after clearing cache or after flashing the su update?
Click to expand...
Click to collapse
When I rebooted my device after the given instructions were completed.
Manipal said:
When I rebooted my device after the given instructions were completed.
Click to expand...
Click to collapse
Well I have never seen that error before. It is strange because it is just Su binary and SuperSu in the zip i gave you. Did you manage to boot it?
Yes, I have to reinstall all my software's afresh.
Sent from my Nexus 4 using XDA Free mobile app
Manipal said:
Yes, I have to reinstall all my software's afresh.
Sent from my Nexus 4 using XDA Free mobile app
Click to expand...
Click to collapse
Is root working now at least?
christi9503 said:
Is root working now at least?
Click to expand...
Click to collapse
Yes, thanks god, it's working now.
Between thanks for the assistance.
Sent from my Nexus 4 using XDA Free mobile app
Manipal said:
Yes, thanks god, it's working now.
Between thanks for the assistance.
Sent from my Nexus 4 using XDA Free mobile app
Click to expand...
Click to collapse
Sorry for the inconvenience with that error. I don't know what caused it never seen that ever before hope all your data is ok.
christi9503 said:
Sorry for the inconvenience with that error. I don't know what caused it never seen that ever before hope all your data is ok.
Click to expand...
Click to collapse
I reinstalled my rom last night and when I was to reboot again it remained struck there. So first thing in the morning I formatted and installed the rom fresh. It took me about 3 hours to get everything installed and now I am facing the same trouble again.
I am struck at my bootscreen. I rebooted the device when I tried to install a font of Chocooky from Fonter Xposed Module. I am in a big fix now. Please help me now as it is not bypassing the bootscreen :crying:
I am not home and i don t have your device. I just gave a universal root solution. I will try to help when i get home to make some research for your device.
Sent from my LG-P710 using XDA Free mobile app

TWRP crashing...

I'm trying to use TWRP to update to a new cm12 nightly, but every time I select the zip and try to flash it, TWRP crashes and reboots. Is there something I'm missing? It's probably just a noob mistake... For example I only today figured out how to get TWRP to cooperate with encryption and my pattern lock on boot up, hah. I thought it wasn't mounting storage because something was corrupted. Anyways, thanks for any suggestions you can give.
What version of twrp are you using?
Sent from my Nexus 5 using XDA Free mobile app
I have the same issue. It is only with 5.1 Android and I am using 2.8.5 TWRP
Sent from my VS985 4G using Tapatalk 2
I had the problem this afternoon. I just tried it again and it worked. Didn't change anything.. never had problems like this on any other Nexus device. Creepy.
jd1639 said:
What version of twrp are you using?
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
2.8.5.0. But I did some more tinkering today and eventually solved my problem. Here's to help you others who saw the same thing: I tried using progressively older versions of TWRP to see if they're used work, until version 2.8.2.1 I think. At that version, instead of crashing, it gave me an error that my zip file was corrupted. I deleted the zip and downloaded it again, switched back to version 2.8.5.0, and everything worked. (except for the Rom, which had bugs that made it unusable, but at least it flashed successfully and booted lol). Hopefully my experience can help someone else now.
I'm having issues with twrp hopefully I found the right thread. It shows no storage available? I'm trying to flash CM. Thanks

Magisk n Global beta ROM

I'm regular user of Magisk on my Mi5. But it was plagued with the famous issue of losing root after a while.
But while playing around beta ROM, I found that it comes preinstalled with busybox. Somehow felt that's breaking it, so used osmosis's busybox cleaner script from recovery and removed it.
Gave the phone couple of reboots, now Magisk doesn't lose root.
May be you guys can try, make sure you have full flashable ROM zip available in case of any issue or bootloops.
Yup it has, I didn't want to resort to that because I want to keep system unmodified... I'm thinking if it's possible to make use of the magisk busybox to systemlessly replace the inbuilt one...
Sent from my MI 5 using Tapatalk
I haven't seen any issue with removing busybox and i can pass safetynet with Magisk module.
Where you able to take an ota?... With my current setup, I can take ota anytime... V13 is just around the corner now...
Sent from my MI 5 using Tapatalk
I always go for full ROM, handy in case of issues.
chhapil said:
I always go for full ROM, handy in case of issues.
Click to expand...
Click to collapse
Full Rom, Recovery Rom or Fastboot Rom?
Edit: Does it flash via updater app even if the system is modified?
Sent from my MI 5 using Tapatalk
I mean recovery flashable ROM. Yeah the updater app uses recovery flashable.
Full ROM don't check for system modifications
chhapil said:
I mean recovery flashable ROM. Yeah the updater app uses recovery flashable.
Full ROM don't check for system modifications
Click to expand...
Click to collapse
Oh... Okay, thanks for the info... Didn't test that myself because full roms are just too big...
Sent from my MI 5 using Tapatalk
I just tried removing system busybox, the issue still persist after installing modules such as appsystemizer...
Sent from my MI 5 using Tapatalk
teddy0209 said:
I just tried removing system busybox, the issue still persist after installing modules such as appsystemizer...
Sent from my MI 5 using Tapatalk
Click to expand...
Click to collapse
thats issue with the module, for me as well AppSystemizer is breaking the root.
Give it a couple of reboots

Categories

Resources