{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Back again!
You may remember me from my SkyDragon roms/kernels and HolyDragon kernels for OP6/OP6T/OP3/N6/M8/M7/G3 among other devices. This is the latest sm8150 kernel+audio source from OnePlus. For now just some latency reductions and a couple listed features while I work on optimizing it. No plans for any overclocking cpu/gpu that slowly kill your phone. No plans to upstream anything as most of the time there's either no benefit at all or it performs worse than stock. I don't care about f2fs and recommend only ext4 as the stock filesystem. My only goal, as always, is to get the best performance *and* battery life out of our phone as possible. Kernel zip uses Anykernel3 by Osm0sis to install so no fear of losing root or ramdisk changes or anything.
~*~*Information*~*~
Flashable Kernel zip supports all OnePlus 7 and OnePlus 7 Pro(non-5G) devices running OOS Stable 10.x
Kernel source is based on official OnePlus 7/7Pro unified source code to ensure best performance
No user setup required - Optimal settings already applied
Compiled with Google Clang 9.0.5(r353983e) and gandalf02's aarch64-9.1 GCC
~*~*Features*~*~
250HZ Kernel
ExFat Support
No user clock-speed modifications
BBR TCP Congestion Profile (set as default
CRC Check Toggle-able (disabled by default)
Power Efficient Workqueue's Toggle (enabled)
Maple IO Scheduler (set as default)
Flar2's Wake Gesture support
KCAL
Boeffla Wakelock Blocker
Latest WireGuard Built-In
~*~*Credits and Thanks*~*~
xanaxdroid
SultanXDA/KernelToast
RandomBlame/Kelsirae
Pafcholini
MLucy
Flar2
MyFluxi
DespairFactor
FranciscoFranco
KDrag0n
Osm0sis
Mauronofrio
Joshuos
dabug123
~*~*Downloads*~*~
To Install :
Make sure bootloader is unlocked
Make sure you're on latest TWRP
Download this kernel zip
Reboot device to TWRP
Find this zip and install
Reboot to system and enjoy!
---
Could also copy zip or image to usb otg drive and flash in twrp
Do not flash with EXKM app
For Oneplus 7/7 Pro(Non 5G) and Oneplus 7T/7T Pro(Non 5G)
SDK_OP7TP_OOS10_RV.10.1
Flashable Zip
AFH
GDrive
--
Telegram Group
TG
Discord Server
Discord
~~~~~~~~~~~~~~~~~~~~~~~~
You can find changes(changelog) by looking at my posted source. You can also find my custom toolchain's, crosstool-ng, and other sources listed there. Any bug reports require logcats/dmesg, thanks!
~*~*Donations*~*~
If you want to donate to my coffee fund, I prefer any cryptocurrency over paypal but either is fine.
Donate with Coinpayments
or just use paypal, thanks!
XDA:DevDB Information
[KERNEL][OP7/7PRO][18 SEP][ SkyDragon [OOS10], Kernel for the OnePlus 7 Pro
Contributors
HolyAngel, Liam_Davenport, Imotep95
Source Code: https://gitlab.com/holyangel/OP7.git
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: Current
Stable Release Date: 2019-05-23
Beta Release Date: 2019-05-21
Created 2019-05-21
Last Updated 2020-09-18
SkyDragon OOS Magisk Mod
Reserved
Reserved
Frequently Asked Questions
Before issues should be reported:
1. Rom needs to be clean flashed
2. No Xposed, AKT Profiles, Helix Engine, other magisk modules, or other mods, etc.
3. Do not restore any apps with TiBu or Swift or some other app restoring application
4. No Substratum themes installed
If you can still reproduce the issue you're having:
1. Logcat/logs must be provided with your report in order to receive any support.
2. I also need a full description of what happened, what you were doing when it happened, and a way to guarantee-ably reproduce the problem. If I or my testers cannot reproduce it, not only will it likely not get fixed, it likely isn't even an issue with the rom/kernel.
3. Screen record or picture of the issue is also helpful.
If you're not familiar with how to get logs, you can reference this great XDA Thread here.
If you can't give logs for errors or possible bugs, I literally cannot help you solve it.
Can't wait to try this out! Thanks!!
This could be a really dumb question, but could the zip be flashed in TWRP from a USB DRIVE..?
Or within an app like EX Kernel Manager?
reaper000 said:
This could be a really dumb question, but could the zip be flashed in TWRP from a USB DRIVE..?
Or within an app like EX Kernel Manager?
Click to expand...
Click to collapse
Not dumb at all, you could totally do either of those to flash it :good:
Wireguard support?
JedixJarf said:
Wireguard support?
Click to expand...
Click to collapse
No and won't be until they can pass a security audit. Says right on their site not to rely on their code until they do.
HolyAngel said:
No and won't be until they can pass a security audit. Says right on their site not to rely on their code until they do.
Click to expand...
Click to collapse
No problem thanks ?
Bacc at it again! Great job!
Excellent! I'm assuming Skydragon ROM eventually =).
SoullessMexican said:
Excellent! I'm assuming Skydragon ROM eventually =).
Click to expand...
Click to collapse
Yes will come when it's ready
Wouldn't you think that the CRC toggle is obsolete on any Oneplus device you support.
HolyAngel said:
CRC Check Toggle-able (disabled by default)
Click to expand...
Click to collapse
Hey buddy,
I was having a look at CRC check and what it does.
https://gitlab.com/HolyAngel/op7/commit/818f89d20f197ddf81aa2c8a40551b96173f2c2e
I've noticed your commit is in the mmc driver but given that we have UFS3.0 (not emmc 5.1) and that we don't have a micro SD slot, isn't this a worthless change because we will never be using mmc based storage?
Regards,
Ravi
Sent from my OnePlus7Pro using XDA Labs
Telegram Group
Are there any telegram groups for this kernel/rom?
@HolyAngel
Welcome & thank you.
@HolyAngel I flashed the kernel with EXM and after reboot it shows me a message: "There is an internal problem in your device. Please contact your manufacturer."
Hirs_E_Fruit said:
@HolyAngel I flashed the kernel with EXM and after reboot it shows me a message: "There is an internal problem in your device. Please contact your manufacturer."
Click to expand...
Click to collapse
If the same as on OP6, then you can dismiss it on each reboot. Last year it took a couple of weeks to figure out what caused it and it was subsequently addressed. It doesn't have any impact on the working of your phone.
Sent from my OnePlus7Pro using XDA Labs
rav101 said:
Hey buddy,
I was having a look at CRC check and what it does.
https://gitlab.com/HolyAngel/op7/commit/818f89d20f197ddf81aa2c8a40551b96173f2c2e
I've noticed your commit is in the mmc driver but given that we have UFS3.0 (not emmc 5.1) and that we don't have a micro SD slot, isn't this a worthless change because we will never be using mmc based storage?
Regards,
Ravi
Click to expand...
Click to collapse
Yeah most likely useless at the moment but the stock defconfig compiles the mmc driver anyways.
Hirs_E_Fruit said:
@HolyAngel I flashed the kernel with EXM and after reboot it shows me a message: "There is an internal problem in your device. Please contact your manufacturer."
Click to expand...
Click to collapse
Yes this is the message on boot listed in the op that will be fixed soon. Can safely ignore it.
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Kernel features:
Powered by Ubuntu 18.04.3 x86_64 (sparky VPS @ www.servercore.com.br - thanks @ChristianLetti)
Build with custom toolchain blu_gcc-9.2.0 (cortex-a73.cortex-a53 targeted, build with latest Crosstool-NG from GCC-9.2.0 snapshot)
Full -O2 build with device and target flags enhanced, linaro build improvements, etc
Less is more: stockish OP5 builds based on OnePlusOSS/android_kernel_oneplus_msm8998
Systemless installer (doesn't touch system partition, OTA friendly - Nougat only), AnyKernel3 backend (compatible with autoflash apps)
Removed some debug and logging options
ARM enhanced performance and battery patches
CVE security patches, general upstream and CAF fixes
Several CPU Governors (blu_active modded own governor by default - fastlane mode available!)
No OC, use 300HZ kernel timer frequency
msm_performance input boost toggle on/off (enabled by default), tweaked cpu_boost driver
Enhanced TCP methods (westwood is default), Network and Wifi tweaks and updated drivers
Several I/O control tweaks, added schedulers FIOPS and ZEN v2 is default, tweaked and upstreamed filesystems (F2FS, ExFAT, NTFS, CIFS & NFS)
Removed verify and doesn't force encryption, patched SafetyNet flags to pass CTS
Stock thermal driver by default (custom tunables available for ROMs with no thermal daemon)
Disabled hotplug, also on low battery levels (CTL and BCL)
Optimized crypto routines
Swap and adaptive LMK off by default, 60 apps on background by default
Vibrator Strength tunable and Gesture Haptic Feedback control (touchpanel and FPR)
KGSL fixes and reworked GPU driver (goes to idle @ 180MHz)
adrenoboost enabled by default at medium level
KCAL - Advanced color control for Qualcomm MDSS v2 (RGB calibration and post-processing features)
KLAPSE support (v5.0)
DASH charge and USB Fast Charge (USB mode up to 900mA with MTP on)
Battery/Notification LED control
FS fsync toggle on/off
Wakelock blockers available
zx2c4's wireguard support
CDROM emulation on mass_storage (compatible with DriveDroid 0.10.36+)
Compatible with Kernel Adiutor, EXKM, FKM and others
DOWNLOAD KERNEL ZIPExtras download location(No mirrors please)
Warning: If you come from other kernel or have any issues, you should dirty flash your ROM before flashing blu_spark zip to avoid problems.
Reflash ROM -> if you want root flash SuperSU or Magisk (default, no plugins/modules) -> flash blu_spark.
If you are already rooted or upgrading between blu_spark versions, just flash the kernel zip. Also uninstall or clean data of any kernel control app you're using.
About bugs and troubleshoots: don't bother to post if a log isn't ready or without steps so the behavior can be replicated. I only active support stock OOS with NO mods whatsoever (apart from root). That includes NO support if using xposed, Magisk with modules, etc.
If you're using custom ROMs (including OOS based ones) or Open Betas you're on your own. I'm only interested on debugging stuff in stock and stable OOS.
Save the SOT and battery stats/screenshots for general threads, here we deal with development, not personal tastes and results.
Also don't spam this thread with LOS or other ROMs stuff like "this don't work, my app doesn't open, etc" , no OT about OTAs, apps, ROM bugs, Recovery/TWRP troubleshoots and other userspace stuff. There's threads for it, use them.
Going back to stock: This kernel installer doesn't change your filesystem. You can backup your boot.img with TWRP before flashing blu_spark if you want to go back to full stock or just dirty flash your full ROM.
If you like my work, donations are always welcome.
Don't forget to hit thanks and rate the thread nicely, it's free
OnePlus 5T development unit donated by OnePlus. Big shouts to them
Very proud of being on the OnePlus Developer Program, special thanks to Adam K. for being such a supportive person.
XDA:DevDB Information
blu_spark kernel for OP5/5T unified, Kernel for the OnePlus 5T
Contributors
eng.stk
Source Code: https://github.com/engstk/op5
Kernel Special Features: Powered by sparky
Version Information
Status: Stable
Current Stable Version: r184 unified pie
Stable Release Date: 2019-10-19
Current Beta Version: r180 unified pie
Beta Release Date: 2019-08-24
Created 2017-11-17
Last Updated 2019-10-18
blu_spark r51 unified
All right crew!
First kernel for the 5T is up, fastlane style :highfive:
This is an initial build, tested only on OP5. It is a baseline for 5/5t unified installer (similar of 3/3T).
For now, seems like fw updates from OOS 4.7 are needed for some stuff, so it is only working 95% on the OP5 OOS 4.5.* (FPR doesn't work).
Don't flash this on OP5 for now. On 5T all should be working just fine.
So, keep in mind that it's tested on the OP5, on the 5T it's not because I don't have the device just yet.
Backup and take all the precautions you can think of, if you're cat get's on fire you're on your own
blu_spark_r51-oos_op5-op5t_79c5b56.zip
build: use newest and improved blu_naro-7.2, build from developer snapshot Linaro GCC 7.2-2017.10, with updated components and improvements/fixes
Synchronize codes for OxygenOS 4.7.1
full rebase and features bringup from OP5
drivers: misc: fix a couple build errors
Click to expand...
Click to collapse
Keep it real, keep it true, keep it blu :highfive:
Keep in mind: I will give no active support for custom ROMs (including OOS based ones).
Meaning, if using anything besides stock and stable OOS don't bother posting about it.
I am only interested on debugging stuff in stock and stable OOS (with logs and reproducible steps to replicate the issue).
Don't spam this thread with LOS or other ROMs stuff like "this don't work, my app doesn't open, etc" or debugging features.
Also don't go spam and bug reporting on ROM threads if using this.
If you like my work, donations are always welcome.
Don't forget to hit thanks and rate the thread nicely, it's free
bronderb said:
Wow, that was quick!
Click to expand...
Click to collapse
had it running since yesterday :silly:
Phone isn't even released to public yet.
eng.stk is a legend.
From my OP3T
(No mirrors allowed)
Click to expand...
Click to collapse
Are you aware that you violate the terms of the GPL with this?
Rosa Elefant said:
Are you aware that you violate the terms of the GPL with this?
Click to expand...
Click to collapse
For security purposes the place for downloads is this xda repo for the compiled stuff.
Source code is available for anyone to use and build for themselves.
Don't see any issue with that, this is only a cortesy.
The issue is that the GPL enforces you to allow anyone to distribute any derivative works - including "the compiled stuff" - in any way they want. That also means mirrors. So no, "no mirrors allowed" violates the GPL. You might want to replace that by "please don't mirror" or something.
(I know this is nitpicking in a way. I was just wondering.)
Rosa Elefant said:
The issue is that the GPL enforces you to allow anyone to distribute any derivative works - including "the compiled stuff" - in any way they want. That also means mirrors. So no, "no mirrors allowed" violates the GPL. You might want to replace that by "please don't mirror" or something.
(I know this is nitpicking in a way. I was just wondering.)
Click to expand...
Click to collapse
I'm not enforcing anything, this is valid for xda links posted, as a cortesy and for security. Word play it's what it is, I can change if it suits you better.
Other than that you can burn CDs with it and send to your friends if you like
WHAT!
You're a Living Legend @eng.stk
Rosa Elefant said:
Are you aware that you violate the terms of the GPL with this?
Click to expand...
Click to collapse
Rules are made to be broken. Not every rule needs to be enforced when it wont matter and harms nobody. Like he said its a courtesy thing stop doing the moderation for XDA they do a good job themselves. Keep OT out as much as possible. Some people would rather see this thread get support instead of strikes from "rules"
You know, you could just send me a PM instead of further distracting this topic. But FWIW, a legally binding licensing term is not a "rule".
eng.stk said:
Advanced filesystem: If you want to use f2fs, do the following (backup your data to external source before attempt this, it will erase all your sdcard data)
Go to Wipe -> Advanced Wipe -> Select only Data -> Repair/Format File system -> Change partition type to f2fs
Go to Wipe -> Advanced Wipe -> Select only Cache -> Repair/Format File system -> Change partition type to f2fs
Reboot and profit
To be back on ext4, just do the same but choose ext4 instead
Click to expand...
Click to collapse
Does recommended or not if i also partition /system as f2fs?
exodius48 said:
Does recommended or not if i also partition /system as f2fs?
Click to expand...
Click to collapse
No, you can only use it on data.
I prefer ext4 nowadays.
Sent from my blu_spark'd OP5
eng.stk said:
No, you can only use it on data.
I prefer ext4 nowadays.
Click to expand...
Click to collapse
Why's that..? You are the reason I was using F2FS due to your regular updates on kernel / recovery. Faced bad exp on it?
arvindgr said:
Why's that..? You are the reason I was using F2FS due to your regular updates on kernel / recovery. Faced bad exp on it?
Click to expand...
Click to collapse
Some instability on latest times and on fast UFS devices there's no much performance difference.
Also I don't upstream f2fs on 4.4 because of FBE and crypto stuff, prefer to leave as it is and just add security patches when applicable.
Most likely because nowadays Memory is so fast (especially with UFS2.1) that it doesn't really matters and isn't worth the trouble.
I tested it back on my days with the OPO and Nexus 6 and never saw any real benefit for most parts and they haven't have had UFS2.1.
So don't expect too much of a performance gain with F2FS.
EXT is a mature system, more mature than F2FS. And sometime safety counts more than fractions of seconds of starting speed for a bigger application.
Are there wake-up gesture options in the Kernel?
xocomaox said:
Are there wake-up gesture options in the Kernel?
Click to expand...
Click to collapse
Gestures are the same as stock.
Thanks for coming man I just order my 5t
dabug123 said:
Thanks for coming man I just order my 5t
Click to expand...
Click to collapse
Liquid remix for 5t? Haha just joking nice that you're getting one too
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Introduction
As of July 11th, 2018, this kernel has been discontinued as I have sold the device. Since I don't recommend using a kernel that is not constantly updating, I suggest looking at RenderZenith if you are on OxygenOS or Singularity if you are on a custom ROM.
Hello everyone, this is my personal kernel for the OnePlus 5T. While I am not a super star kernel developer, I do know my way around it. My philosophy on kernels is pretty simple:
Follow stable Linux always. Updates will be delivered within 24 hours of their release to kernel.org.
Stable kernel rules work best (only add small things when possible).
Security and stability are paramount. Vulnerabilities are patched as soon as they are disclosed.
Features will be added only as needed (I have a list of things in the FAQ I will NOT add, even if requested).
Hopefully you enjoy
Couple of quick notes for this thread: I do not currently own a OnePlus 5T (I own a OnePlus 5) but I have a couple of reliable testers and the tree is unified so there should be no issues. Since the builds are unified, the zip name and kernel version will show OP5.
Important thread information!
I refuse to acknowledge/respond to bug reports that do not include clear steps to reproduce, a logcat, and a console ramoops (if random rebooting) or a dmesg (any other issues). Follow this guide to do this.
Keep things civil, I do NOT tolerate flaming of any kind.
OT is allowed.
Features
NOTE: This list fluctuates with versions, it will not always been 100% up to date
Here are the major features of the kernel (feel free to explore Github)
Up to date with OOS (5.1.3 and Open Beta 10)
Custom branch compatible with most 8.1.0 ROMs (see below)
Up to date with the latest stable Linux version (4.4.140)
Up to date with the latest CAF tag for Oreo (LA.UM.6.2.r1-09300-sdm660.0)
Mainline patches from Linux, focusing on bug fixes/security
Mainline CFQ scheduler improvements
Kernel hardening from CopperheadOS
Several subsystems converted to use power efficient workqueues
The following user facing features:
Accidental touch protection on hardware keys
Backlight dimmer
KCAL color control
Maple I/O scheduler
Sweep2sleep
Sound control
Wakelock control
Latest WireGuard snapshot (0.0.20180708)
Westwood as the default TCP algorithm
Built with a self compiled Clang 7.0 toolchain with a local initialization sanitizer (build script here, previously built with the latest Google Clang 6.0 toolchain here)
Hides bootloader unlock from SafetyNet (can still fail through other means)
Disables dm-verity
Does NOT modify decryption status
Flashed with AnyKernel2 (thanks to @osm0sis)
Downloads
Primary: https://github.com/nathanchance/op5/releases
NOTE #1: FOR THIS DEVICE, ONLY 3.x AND ABOVE ARE COMPATIBLE, MEANING NO NOUGAT SUPPORT!!
NOTE #2: The newer builds of 3.x and 4.x are unified! The zip will dynamically detect if you are on OxygenOS or a custom ROM and flash the correct kernel image.
NOTE #3: 3.x is for OOS 5.x 8.0, 4.x is for OOS 5.x 8.1
Installation
Through TWRP:
If you are on stock:
If you are on the stock kernel: flash the kernel zip and reboot
If you are on a custom kernel: flash the stock boot image matching your build number, flash the kernel zip, and reboot. I would also recommend dirty flashing the latest OOS zip as well.
If you are on a custom ROM:
If you are on the kernel that came with your ROM: flash the kernel zip and reboot
If you are on a custom kernel: dirty flash your ROM zip, flash the kernel zip, and reboot
Upgrading from one Flash version to the other:
Just flash the kernel zip and reboot
Through Franco Kernel Manager (requires root):
Getting back to stock if necessary (only needed if coming from another kernel):
Grab the latest stock boot image from the OTA zip.
Click on "Manual flasher", select the boot image, and select "Just Flash".
Reinstall Magisk through Magisk Manager (Install -> Direct Install).
If on stock or upgrading from another Flash release:
Download the zip (and optionally, the md5) from the link above
Tap on "Manual flasher"
Navigate to Download
Tap on the zip, select Auto-flash, and choose one of the options.
Reboot and enjoy!
Changelog
Latest release post!
GitHub serves as the ultimate changelog, links are at the bottom of this post
Frequently asked questions
1.1 Q: I am having an issue, can you help me?
1.1 A: I am not an amazing kernel developer but I will certainly try my best. First, start by reading the release posts, as I may make note of a particular issue. Also search the thread to see if I have discussed it before. If you see nothing, please provide me with a dmesg/last_kmsg and logcat, your ROM/kernel version, and a detailed description of the issue, following this guide. If I can't reproduce reliably, I'm not going to fix the issue.
1.2 Q: What ROMs are compatible with the custom builds?
1.2 A: As of March 14th, 2018, I have confirmed the following ROMs are 100% compatible with Flash:
LineageOS
Dirty Unicorns
Codename: Phoenix
GZOSP/Validus
OmniROM
AICP
If you are using a ROM with no issues, let me know and I'll add it here! If you are having issues, following the above steps and I'll attempt to fix whatever incompatibility there is. If I can't do it without breaking LineageOS/Dirty Unicorns, you're out of luck.
1.3 Q: Can you add xyz feature?
1.3 A: If you link me the commits or tell me what kernel you had the feature in, I can take a look at them. I will not go digging super hard for commits and I will ignore requests that don't include this information. I won't promise that I will merge every request but I will always take it into consideration. I will NOT add the following:
Overclocking or underclocking of CPU or GPU
Undervolting
Any governors other than interactive
Any schedulers other than cfq and maple
Anything that compromises performance
1.4 Q: How do I control the kernel?
1.4 A: I want to be very clear: the kernel does NOT need to be tuned to be useful. Most of the improvements are under the hood and don't require any user intervention to take advantage of them. In fact, if you don't know what you are doing, you could degrade the experience.
To control the user visible features of the kernel listed above, I recommend using either @franciscofranco's Kernel Manager for Franco Kernel (which has Flash Kernel support for downloading and automatically flashing the latest kernel zip along with some nice, user friendly ways for tuning the kernel) or @flar2's EX Kernel Manager.
1.5 Q: OMFG MY BATTERY SUXXXX PLS FIX!!!
1.5 A: The kernel doesn't drain any battery, use an app like BetterBatteryStats to figure out what app is screwing with your phone.
1.6 Q: I am not getting notifications on OOS, what is the cause?
1.6 A: This could be for a couple of reasons. If you haven't already, disable advanced optimizations in Settings > Battery > Battery optimization > Three menu dots. Another reason may be that I ship a compiled Wi-Fi module. I do this for two reasons: I want to have the latest fixes and I enable CONFIG_MODULE_SIG, which checks the signature of a module before loading it for security reasons. This could introduce some incompatibility with OOS, which is something I have no control over.
Thanks to:
The various other developers for their patches (specifically @zx2c4 for WireGuard and @joshuous for fixing the notification delay on Wi-Fi)
@osm0sis for AnyKernel2
@franciscofranco for adding Flash Kernel support to Kernel Manager for Franco Kernel
@adinkwok for being a bro
@phantom146 for the thread banner
All of you guys for viewing the thread
A note about donations
Quite a few people have asked to donate to me in the past and I have turned them down. I am not in this for the money, this is my hobby, something I truly enjoy. If you truly want to donate to something (it is not expected in the slightest), I recommend an entity like the Open Source Initiative, the Free Software Foundation, XDA, or any one of the people I have thanked in the OP. Additionally, you are free to copy any and all of my work; the only thing I request is that you not ask for donations as well (though I can't really enforce this lol). Thank you.
Kernel source links
8.0.0 (OxygenOS - 2.x): https://github.com/nathanchance/op5/commits/8.0.0-oos
8.0.0 (OxygenOS - 3.x) and 8.1.0 (custom ROMs - 3.x): https://github.com/nathanchance/op5/commits/8.x-unified
AnyKernel (8.x): https://github.com/nathanchance/AnyKernel2-archive/commits/op5-flash-8.x
DISCLAIMER: I openly welcome off topic in my threads. Mods, please do not clean off topic discussion and users, do not complain about off topic discussion here. I may direct you to another thread if it is so suited but I won't have the discussion cleaned. Thank you.
Wew, great!
It's officially lit in this forum
http://nchancellor.net/downloads/kernels/op5/8.0.0/oos/stable/
Above link right?
Welcome and Thanks, I'm not seeing OP5t folder, is this unified ? @nathanchance
shafi31 said:
http://nchancellor.net/downloads/kernels/op5/8.0.0/oos/stable/
Above link right?
Click to expand...
Click to collapse
mukesh22584 said:
Welcome and Thanks, I'm not seeing OP5t folder, is this unified ? @nathanchance
Click to expand...
Click to collapse
Yes, read the intro lol.
Sent from my Pixel 2 XL using XDA Labs
Nice! Glad to see you here man
Nice to see the flash here. I love your work during the Nexus 6p days.
Welcome ninja/ the flash :highfive: now i am more motivated
Mine!
Enviado desde mi ONEPLUS A5010 mediante Tapatalk
Nice! First running OB1 kernel. Thank you!
welcome. and who said your not a rockstar developer? you were amazing way back shamu days bru...
and @akhilnarang is also here....
Awesome mate[emoji108] Been a while since using flash on my bullhead [emoji6]
Gesendet von meinem ONEPLUS A5010 mit Tapatalk
Awesome kernel.. Running it on my op5t everything is fine and working..Thanks @nathanchance for support
i try the non OOS version, the 8.0 kernel doesn't work at all, it get reboots to fastboot bootloader. and the 8.1 kernel is working fine, but i haven't test it intensively yet.
WOW...Welcome to the T -Zone
Hi man, thanks a lot, i love your kernel
Woot woot!! Flash Kernel FTW :highfive:
marko94 said:
Awesome kernel.. Running it on my op5t everything is fine and working..Thanks @nathanchance for support
Click to expand...
Click to collapse
Are you running it in combination with Liquid Remix Rom on your OP 5T ?
SlyUK said:
Are you running it in combination with Liquid Remix Rom on your OP 5T ?
Click to expand...
Click to collapse
nope, atm oreo oos beta
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Kernel features:
Build with custom toolchain Linaro GCC 4.9.4 2017.01
Full -O2 build with device and target flags enhanced, linaro build improvements, etc
Less is more: stockish builds from BKL-L04 EMUI8.1.0.107 source drop
Systemless installer (doesn't touch system/vendor partition, OTA friendly)
Removed some debug and logging options
ARM enhanced performance and battery patches
CVE security patches, general upstream and miscellaneous fixes
Several CPU Governors (blu_active modded own governor by default - fastlane mode available!)
cpu-boost CAF driver ported for kirin with some added improvements (Dynamic Stune Boost included)
No OC, use 300HZ base timer frequency
Enhanced TCP methods (westwood is default), Network and Wifi tweaks and updated drivers
Several I/O control tweaks, added schedulers FIOPS and ZEN v2 is default, tweaked and upstreamed filesystems (F2FS, ExFAT, NTFS, CIFS & NFS) (WIP)
Removed verify and doesn't force encryption, patched SafetyNet flags to pass CTS (WIP)
Stock thermal driver by default
Optimized crypto routines (WIP)
Swap and ZRAM off by default
Vibrator Strength tunable and Gesture Haptic Feedback control (touchpanel an FPR) (WIP)
Graphic stack fixes and reworked GPU driver
USB Fast Charge (USB mode up to 900mA with MTP on)
Battery/Notification LED control (WIP)
FS fsync toggle on/off
Wakelock blockers available
zx2c4's wireguard support
CDROM emulation on mass_storage (compatible with DriveDroid 0.10.36+)
init.d support (put your scripts in /system/su.d or /su.su.d [systemless SuperSU], /magisk/.core/post-fs-data.d [Magisk])
Compatible with Kernel Adiutor and others
DOWNLOAD KERNEL ZIP (No mirrors please)
Warning: If you come from other kernel or have any issues, you should dirty flash your ROM before flashing blu_spark zip to avoid problems.
Reflash ROM -> if you want root flash SuperSU or Magisk (default, no plugins/modules) -> flash blu_spark.
If you are already rooted or upgrading between blu_spark versions, just flash the kernel zip. Also uninstall or clean data of any kernel control app you're using.
About bugs and troubleshoots: don't bother to post if a log isn't ready or without steps so the behavior can be replicated. I only active support stock EMUI with NO mods whatsoever (apart from root). That includes NO support if using xposed, Magisk with modules, etc.
If you're using custom ROMs (including EMUI based ones) you're on your own. I'm only interested on debugging stuff in stock and stable EMUI.
Save the SOT and battery stats/screenshots for general threads, here we deal with development, not personal tastes and results.
Also don't spam this thread with LOS or other ROMs stuff like "this don't work, my app doesn't open, etc" , no OT about OTAs, apps, ROM bugs, Recovery/TWRP troubleshoots and other userspace stuff. There's threads for it, use them.
Going back to stock: This kernel installer doesn't change your filesystem (systemless).
You can backup your ramdisk.img and kernel.img with TWRP before flashing blu_spark if you want to go back to full stock or just dirty flash your full ROM.
If you like my work, donations are always welcome.
Don't forget to hit thanks and rate the thread nicely, it's free
Honor View 10 development unit donated by Honor USA. Big shouts to them
Special thanks to @[email protected]_USA for being such a supportive person.
XDA:DevDB Information
blu_spark kernel for Honor View 10, Kernel for the Honor View 10
Contributors
eng.stk
Source Code: https://github.com/engstk/view10
Kernel Special Features: Powered by sparky
Version Information
Status: Stable
Current Stable Version: r16
Stable Release Date: 2018-05-31
Current Beta Version: r8
Beta Release Date: 2018-04-30
Created 2018-04-29
Last Updated 2019-11-29
blu_spark r8
All right crew!
blu_spark has made to Honor View 10!
First build is up :highfive:
Lot's of stuff merged in, we now have a nice and stable baseline to work with.
More of the usual missing goodies to come in future builds :fingers-crossed:
It was tested in L04 model with latest EMUI 8.1.0.105 so any other FW your results may vary.
To install you must use TWRP, @Pretoriano80 Unofficial TWRP is recommended.
You must have stock (or rooted) ramdisk and kernel before install.
blu_spark_r8-view10_66f0c4b.zip
build: use Linaro GCC 4.9.4-2017.01 for now
First kernel build with too much stuff to talk about, check git
ramdisk and installer changes to match View 10 stuff
Click to expand...
Click to collapse
Keep it real, keep it true, keep it blu :highfive:
Keep in mind: I will give no active support for custom ROMs (including EMUI based ones).
Meaning, if using anything besides stock and stable EMUI don't bother posting about it.
I am only interested on debugging stuff in stock and stable EMUI (with logs and reproducible steps to replicate the issue).
Don't spam this thread with LOS or other ROMs stuff like "this don't work, my app doesn't open, etc" or debugging features.
Also don't go spam and bug reporting on ROM threads if using this.
No mirrors please
If you like my work, donations are always welcome.
Don't forget to hit thanks and rate the thread nicely, it's free
nice glad to see linaro gcc was usable and was just something odd in my end... lol
for some odd reason on ubertc was usable as gcc fir me...
Nice job....
Does this support changing charging rate in KA?
Can i install this on BKL-L09 model?
kevp75 said:
nice glad to see linaro gcc was usable and was just something odd in my end... lol
for some odd reason on ubertc was usable as gcc fir me...
Click to expand...
Click to collapse
Yeah well try to check if you have any cruft or leftovers derping, I encountered similar situation when building.
venreddy said:
Nice job....
Does this support changing charging rate in KA?
Can i install this on BKL-L09 model?
Click to expand...
Click to collapse
No charge changes at the moment.
If fw is 8.1 should work, otherwise I don't know. Backup, try and let us know.
Sent from my blu_spark'd Honor View 10
eng.stk said:
Yeah well try to check if you have any cruft or leftovers derping, I encountered similar situation when building.
Click to expand...
Click to collapse
yeah, thought that too... did the same on fresh source download too tho
Got it to compile using Uber TC tho, so maybe I'll run with it and see what I can break LOL :laugh:
Woot
eng.stk said:
No charge changes at the moment.
If fw is 8.1 should work, otherwise I don't know. Backup, try and let us know.
Sent from my blu_spark'd Honor View 10
Click to expand...
Click to collapse
BKL-L09 is still with 8.0 emui.
I doubt this will work, but will try this later. It would not brick my phone right? Just need to back up stock kernel and fish it, if phone doesn't boot then flash backedup kernel. Right?
venreddy said:
BKL-L09 is still with 8.0 emui.
I doubt this will work, but will try this later. It would not brick my phone right? Just need to back up stock kernel and fish it, if phone doesn't boot then flash backedup kernel. Right?
Click to expand...
Click to collapse
backup both kernel and ramdisk
Rommco05 said:
Not bootnig on L09 LOS, stock kernel L04 don't boot too
Click to expand...
Click to collapse
fastboot flash your stock kernel.img and ramdisk.img
Rommco05 said:
Not bootnig on L09 LOS, stock kernel L04 don't boot too
edit: just telling
Click to expand...
Click to collapse
Thanks for testing. Hope Honor updates all the phones from all regions to Android 8.1 besides L04 devices :fingers-crossed:
Fragmentation is never good...
can i flash on BLA-L29 with emui 8 oreo 8.0?
fatalynx said:
can i flash on BLA-L29 with emui 8 oreo 8.0?
Click to expand...
Click to collapse
backup your ramdisk.img and kernel.img and tell us
(note, if you read the thread a little [like the couple posts above you], you'd see that it really only works on the US version, but, do what you want....)
Try to enable bonding mode inside defconfig, most of the new wifi driver support this option
scafroglia93 said:
Try to enable bonding mode inside defconfig, most of the new wifi driver support this option
Click to expand...
Click to collapse
I can checknit out, but some OEM don't enable that on 2.4G because it can introducr wifi issues with some APs.
Sent from my blu_spark'd Honor View 10
kevp75 said:
backup your ramdisk.img and kernel.img and tell us
(note, if you read the thread a little [like the couple posts above you], you'd see that it really only works on the US version, but, do what you want....)
Click to expand...
Click to collapse
will give it a shoot tq btw..
kevp75 said:
yeah, thought that too... did the same on fresh source download too tho
Got it to compile using Uber TC tho, so maybe I'll run with it and see what I can break LOL :laugh:
Click to expand...
Click to collapse
cross-compile is hardcoded in tzdriver/Makefile and will only use aarch64-linux-android-
https://github.com/UchihaDev/HyperPlus/commit/f04adc459eb60bcc1e22158ef6ae834e24929232
ajituchiha said:
cross-compile is hardcoded in tzdriver/Makefile and will only use aarch64-linux-android-
https://github.com/UchihaDev/HyperPlus/commit/f04adc459eb60bcc1e22158ef6ae834e24929232
Click to expand...
Click to collapse
Appreciate it mate.
Thanks for helping the noob compiler lol
fatalynx said:
will give it a shoot tq btw..
Click to expand...
Click to collapse
And already failed??
Sent from my HUAWEI BLA-L29 using XDA Labs
Tried on bkl-al20, cannot enter tne system.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hello everyone, this is my personal kernel for the OnePlus 5. While I am not a super star kernel developer, I do know my way around it. Hopefully you enjoy :highfive:
NOTE: This list fluctuates with versions, it will not always been 100% up to date
Here are the major features of the kernel (feel free to explore Github)
Based on GzR kernel
Up to date with the latest stable Linux version (4.4.159)
Up to date with the latest CAF branch (kernel.lnx.4.4.r27-rel)
Mainline patches from Linux, focusing on bug fixes/security
Mainline CFQ scheduler improvements
Several subsystems converted to use power efficient workqueues
Backlight dimmer
KCAL color control
CPU Input Boost driver
Devfreq Boost driver
Sound control
Wakelock control
Westwood as the default TCP algorithm
Built with the latest Google Clang 7.0.2 toolchain
Hides bootloader unlock from SafetyNet (can still fail through other means)
Disables dm-verity
Does NOT modify decryption status
Flashed with AnyKernel2 (thanks to @osm0sis)
Primary: https://androidfilehost.com/?w=files&flid=283181
Through TWRP:
If you are on a custom ROM:
If you are on the kernel that came with your ROM: flash the kernel zip and reboot
If you are on a custom kernel: dirty flash your ROM zip, flash the kernel zip, and reboot
Upgrading from one Reaper version to the other:
Just flash the kernel zip and reboot
1.1 Q: I am having an issue, can you help me?
1.1 A: I am not an amazing kernel developer but I will certainly try my best. First, start by reading the release posts, as I may make note of a particular issue. Also search the thread to see if I have discussed it before. If you see nothing, please provide me with a dmesg/last_kmsg and logcat, your ROM/kernel version, and a detailed description of the issue, following this guide. If I can't reproduce reliably, I'm not going to fix the issue.
1.2 Q: What ROMs are compatible with the custom builds?
1.2 A: My daily driver is GZOSP so I test all the builds on this ROM but this kernel should work on other pie ROMs. If you are using a ROM with no issues, let me know and I'll add it here! If you are having issues, following the above steps and I'll attempt to fix whatever incompatibility there is. If I can't do it without breaking GZOSP compatibility, you're out of luck.
1.3 Q: Can you add xyz feature?
1.3 A: If you link me the commits or tell me what kernel you had the feature in, I can take a look at them. I will not go digging super hard for commits and I will ignore requests that don't include this information. I won't promise that I will merge every request but I will always take it into consideration.
1.4 Q: How do I control the kernel?
1.4 A: I want to be very clear: the kernel does NOT need to be tuned to be useful. Most of the improvements are under the hood and don't require any user intervention to take advantage of them. In fact, if you don't know what you are doing, you could degrade the experience. To control the user visible features of the kernel listed above, I recommend using @flar2's EX Kernel Manager.
1.5 Q: OMFG MY BATTERY SUXXXX PLS FIX!!!
1.5 A: The kernel doesn't drain any battery, use an app like BetterBatteryStats to figure out what app is screwing with your phone.
The various other developers for their patches
@martinusbe, @nathanchane for their work on GzR kernel
@nathanchance for android-linux-stable organization, thread inspiration, patches, tips and for inspiring me to start kernel development
@KuranKaname for helping me with kernel and being a bro
@nychitman1 for him work on DU kernel (lots of patches are inspired from him work)
@mady51 for introducing me in kernel development
@osm0sis for AnyKernel2
@akhilnarang for him modified AnyKernel2 for OP5, help and patches for my kernel
All of you guys for viewing the thread
reaper (custom ROMs - 9.0): https://github.com/FRNKSTN/Reaper/tree/reaper
DISCLAIMER: I openly welcome off topic in my threads. Mods, please do not clean off topic discussion and users, do not complain about off topic discussion here. I may direct you to another thread if it is so suited but I won't have the discussion cleaned. Thank you.
XDA:DevDB Information
Reaper, Kernel for the OnePlus 5T
Contributors
FRNKSTN, martinusbe, KuranKaname
Source Code: https://github.com/LiquidRemix-Devices/android_kernel_oneplus_msm8998
Kernel Special Features: HMP
Version Information
Status: Stable
Current Stable Version: 20180930
Stable Release Date: 2018-09-30
Created 2018-09-30
Last Updated 2018-10-15
Reserved
Reserved
Great job
fowzanaamir said:
Great job
Click to expand...
Click to collapse
Thanks
Nice kernel, so far it's very responsive and idles at 300 consistently using interactive. Looking forward to increased standby battery life. You rock!!
For castom or OOS ?
Ideas4ya said:
Nice kernel, so far it's very responsive and idles at 300 consistently using interactive. Looking forward to increased standby battery life. You rock!!
Click to expand...
Click to collapse
Thanks! I'm glad you like
[email protected] said:
For castom or OOS ?
Click to expand...
Click to collapse
For custom ROMs only
Can we OC ? thx
mannyalba said:
Can we OC ? thx
Click to expand...
Click to collapse
Give me commits for that and I'll take a look
Using on CRdroid 9.0 and is all working a treat great work
Sent from my ONEPLUS A5010 using Tapatalk
danny19901 said:
Using on CRdroid 9.0 and is all working a treat great work
Click to expand...
Click to collapse
Thanks
Delivered on the crDroid 8.1. While everything is fine
[email protected] said:
Delivered on the crDroid 8.1. While everything is fine
Click to expand...
Click to collapse
Very cool :highfive: Let me to know if all is working perfect.
manojpawarsj12 said:
Good work ?
Click to expand...
Click to collapse
Thanks
FRNKSTN said:
Very cool :highfive: Let me to know if all is working perfect.
Click to expand...
Click to collapse
I like your work so much, and I know you do everything perfect, I'll add your kernel in my build as default kerenl as soon as I'll get time to build.
Best of luck [emoji106]
mukesh22584 said:
I like your work so much, and I know you do everything perfect, I'll add your kernel in my build as default kerenl as soon as I'll get time to build.
Best of luck [emoji106]
Click to expand...
Click to collapse
Thanks, bro! This is cool
FRNKSTN said:
Give me commits for that and I'll take a look
Click to expand...
Click to collapse
No idea how to do that, i mean overclock/underclock ?
mannyalba said:
No idea how to do that, i mean overclock/underclock ?
Click to expand...
Click to collapse
Check FAQ
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Mint Kernel for the Samsung Galaxy A50
Freshen up your Galaxy.
Mint is an optimized kernel source based on Samsung's open-source kernel drops of the Galaxy A50.
Additional features include:
Built with LLVM/Clang (proton-clang) 13
Built with Link-Time Optimizations (LTO) enabled
A fully-revamped Exynos Mobile Scheduler (EMS) optimized for low-latency tasks.
A smarter governor with boost algorithms from the Galaxy S10 as well as 'inferencing' from the S20.
Added additional I/O schedulers, anxiety is set as default.
Various kernel and performance improvements from Linux upstream, and even from Qualcomm devices.
Backported changes from multiple devices, including newer Galaxy devices.
RAM Plus support (requires ROM support), including support for per-process swap.
Disabled basic Samsung hardening (Knox, etc).
Added support for WireGuard VPN tunnel.
Additional I/O schedulers:
Anxiety - set as default for great performance and good battery life
Maple
SIO
Zen
FIOPS
CFQ - optimizations from Android upstream
Additional TCP Congestion algorithms:
westwood - default
reno
bbr
bic
cubic
htcp
Get the latest Mint Kernel release from GitHub:
See Mint's source here.
The device must have an unlocked bootloader; as well as TWRP, SHRP, or any recovery of your choice installed.
Download latest available release from GitHub Releases.
Copy the ZIP file to your SD card if necessary.
Reboot to recovery.
Flash downloaded ZIP.
Reboot to System instead of recovery.
???
Profit
Q: What bootloader does this need?A: It is strongly advised to install the One UI 3.1 update before installing Mint, for the most stable experience. Installing on Android 10 will cause issues, and is not supported.Q: I'm locked out (bootloop) after installation. What do I do?A: If you ever experience being locked out after installing any build, with SystemUI restarting after entering your password/PIN, and Samsung Account showing a Samsung Account logged out notification, you may have been experiencing the "Pin Problem".
Several builds of TWRP and OrangeFox have a security patch level (SPL) of 2099-12 (December 2099), but Mint follows the latest SPL available to the device. This causes the device to act up once booted into the kernel.Please note that it is intended behavior by the system and is not a bug.You can flash PassReset, or wipe your device to fix it.See here for more information.Q: I'm signed out from my Samsung Account and cannot log back. What do I do?A: Clear Samsung Account data. You can do either of the following:
With a PC and ADB installed, run this command:
Code:
adb shell pm clear com.osp.app.signin
On a terminal app with root access, do:
Code:
su -c pm clear com.osp.app.signin
Q: I'm experiencing other issues.A: Please report through this feedback form, or the Fresh Community on Discord. Please include logs, screenshots, or screen recordings so I can help you better.
Mint will never be possible without the unwavering work of these awesome people. I have tried my best to keep their authorships on Mint's commit history. Thank you very much!
Cruel Kernel for the Galaxy S10/Note10 (evdenis)
ThunderStorms Kernel for the Galaxy S10/Note10 (ThunderStorms21th)
Cosmic Fresh (Dark-Matter7232) and Optimized M21 Kernel (repinger) for the Galaxy M21.
Destrictize Project (DestrictizeProject)
Motorola One Action/Vision Kernel Sources
Quantum Kernel (prashantpaddune)
Zeus Kernel for the Galaxy Note9 (THEBOSS619)
Custom Galaxy A51 Kernel (ianmacd)
StormBreaker Kernel (stormbreaker-project) and Stratosphere Kernel (Stratosphere-Kernel) for the POCO X3
Artemis Kernel for the Pixel 4 XL (celtare21)
GS101/Tensor SoC Kernel Source (Google/AndreiLux)
Reserved 2
You're great.
Is cts profile pass on this kernel ?
I'm using snake os + kakarot kernel and unable to pass cts profile, hence I'm unable to use any banking apps
aaki_rocker said:
Is cts profile pass on this kernel ?
I'm using snake os + kakarot kernel and unable to pass cts profile, hence I'm unable to use any banking apps
Click to expand...
Click to collapse
Passing SafetyNet is handled by your ROM, not the kernel. :>
Oo okay. Thanks
TenSeventy7 said:
Passing SafetyNet is handled by your ROM, not the kernel. :>
Click to expand...
Click to collapse
Is this good for gaming and is this better than prishkernel
One of the best kernel
is the selinux switchable ?
JULiO.7 said:
is the selinux switchable ?
Click to expand...
Click to collapse
Yes. :>
Hiya
I have your fresh rom installed
And I've been using it for quite a while (Amazing rom btw)
Can i flash the kernel with this rom installed?
Will this work on my A505w with stock oneui 3.1?
so im on stock with root already - when i flash this (root) will it over write my magisk and modules or when i flash nonroot will it clear all my magisk stuff? ...
Quick Update:
I'm currently pulling out the Mint 11.5 release as I have observed instabilities when using specific applications. I thought those were fixed from testing but it seems the issue stems deeper than just a single commit revert.
HUGE apologies. The performance is great if I say so myself, but there are some major issues needed to be fixed.
Thank you for your understanding.
Hello, sorry if its a stupid question, but there is something wrong with a50 ever since it was been updated to android 10/android 11, at least on my a505gt, whenever i get into a discord call, the audio starts to cut alot and it goes to mono sound, would a kernel fix it?
Currently I'm using your kernel with SnakeOS v4.0 and it running smooth like good peanut butter, good work.
@TenSeventy7
The question is, can I use it with any AOSP Android 12 ROM?
TheHEARER said:
Currently I'm using your kernel with SnakeOS v4.0 and it running smooth like good peanut butter, good work.
@TenSeventy7
The question is, can I use it with any AOSP Android 12 ROM?
Click to expand...
Click to collapse
I tested this kernel with ProjectRadiant, Corvus, and PixelPlusUI. a bit laggy but I don't think it's relevant with this kernel.
aybrk27 said:
I tested this kernel with ProjectRadiant, Corvus, and PixelPlusUI. a bit laggy but I don't think it's relevant with this kernel.
Click to expand...
Click to collapse
TheHEARER said:
Currently I'm using your kernel with SnakeOS v4.0 and it running smooth like good peanut butter, good work.
@TenSeventy7
The question is, can I use it with any AOSP Android 12 ROM?
Click to expand...
Click to collapse
There's a separate builds for android 12 ROMS
JuanTamqd21 said:
There's a separate builds for android 12 ROMS
Click to expand...
Click to collapse
I am using this with SnakeOS mainly.
I just tested it with the others.