Hi,
I was rooting Sony AX Ultra, I flashed with fastboot files boot.img and recovery.img and everything went fine, I unplugged the cellphone and tried to started on, but only appears Sony logo and restarts.
Tried:
- start TWRP but I can't access with Pwr+VolDown nor Pwr+VolUp
- reset with Pwr+VolUp (three vibrations)
-Connect cellphone to laptop and access to recovery mode throught adb reboot recovery but device isn't found
I need help to restore my cellphone from this softbrick, somebody knows what can I do? Thanks in advance.
Note: I'm using ubuntu for flashing.
mee tooo same Case...
someone can giving us a compatible boot.img and recovery.img for our device F3212
Related
I have a VIBEZ K910 with locked bootloader after upgrading to version 4.4.2. Now it's bricked. Cannot enter test mode with the combination Volumn - and Power button. I think the droidboot.img is damaged. Cannot enter recovery either. Anybody can help me unbrick the phone? Pls:crying:
Sorry to hear about your bricked phone. I can't help specifically as I don't have a Lenovo, but having a search around XDA there seems to have been some success reported in the following thread:
http://forum.xda-developers.com/showthread.php?t=2597590
See this post - http://forum.xda-developers.com/showpost.php?p=52013378&postcount=412
Another post in that thread suggests:
Turn off the phone --> Run minimal ABD and fastboot as admin--> just write the command for recovery install (don't hit enter yet)--> press volume + and volume - button and connect the phone to pc via usb--> now hit enter and voila. Your phone will boot in recovery.
Click to expand...
Click to collapse
Good luck!
anyone?
f4780y said:
Sorry to hear about your bricked phone. I can't help specifically as I don't have a Lenovo, but having a search around XDA there seems to have been some success reported in the following thread:
http://forum.xda-developers.com/showthread.php?t=2597590
See this post - http://forum.xda-developers.com/showpost.php?p=52013378&postcount=412
Another post in that thread suggests:
Good luck!
Click to expand...
Click to collapse
i tried this aldready, but my phone is locked bootloder so that method is no help. Thank you for your support anyway.
hientran41 said:
i tried this aldready, but my phone is locked bootloder so that method is no help. Thank you for your support anyway.
Click to expand...
Click to collapse
OK, but did you look at the second link there, to the specific post in that thread? It suggests a process for locked bootloader, which is why I thought it might help...
Anyhoo, I hope you manage to get it fixed somehow!
Is anybody have the droidboot.img file from the VibeZ K910 dualsim, pls upload it for me. i cannot find it anywhere.
I look into the second link as well. that method for user have a working phone but locked bootloader and want to downgrade.
Ah, OK. Sorry I couldn't help.
u fix your phone?
hientran41 said:
I have a VIBEZ K910 with locked bootloader after upgrading to version 4.4.2. Now it's bricked. Cannot enter test mode with the combination Volumn - and Power button. I think the droidboot.img is damaged. Cannot enter recovery either. Anybody can help me unbrick the phone? Pls:crying:
Click to expand...
Click to collapse
hi do u fix your phone?
Geguniukas said:
hi do u fix your phone?
Click to expand...
Click to collapse
i bricked also
dunno what to do..
---------- Post added at 12:13 AM ---------- Previous post was at 12:13 AM ----------
hientran41 said:
I have a VIBEZ K910 with locked bootloader after upgrading to version 4.4.2. Now it's bricked. Cannot enter test mode with the combination Volumn - and Power button. I think the droidboot.img is damaged. Cannot enter recovery either. Anybody can help me unbrick the phone? Pls:crying:
Click to expand...
Click to collapse
did you fixed the phone?
lenovo k910e 4.2.2 bricked after TWRP for 4.4.2 installation
Hi , this is my first time on the site , so forgive me if ive posted this in the wrong place.
I briked my Lenovo k910e running 4.2.2 rom with google apps purchased off Aliexpress.
What i did was run the flashrec.exe file for TWRP , but not until too late did i realise it was for 4.4.2 instead of 4.2.2.
Now i cannot boot the phone , TWRP was successfully installed and operational , but after about 20 reboots TWRP flash screen is stuck on the TeamWin logo and not accessable.
Ive tried mostl sugestions on this site and others without luck.
I can get the phone recognised with fastboot only after these commands ;
cd downloads
cd fastboot
adb devices
and it seems i may be able to push files to my device.
Is there a working link to the k910 OEM rom k910_ss_s_2_040_0109_131226 someone could direct me to.
All the links i have found so far are corrupted. Is there a way of repairing the TWRP recovery i have in the phone now.
Am I correct in assuming I have to install the OEM factory 4.2.2 ROM to wipe TWRP and istal Lenovo recovery ?.
Any help would be so appreciated. Thanks
Solution ( k910 bricked )
Ok here is the solution even if your device ( k910 dual sim ) is completely bricked as was mine.
I was stuck in Lenovo logo with no success in finding right and working drivers ( windows 7 64x ) and i was not able to to get in recovery official ...everything was just - somehow - deleted...
I had locked bootloader **** and was not be able to flash cmw in working mode ****
There was nothing for me that could recover my phone even if the "hard" way with QPST or miflash etc
So....after 3 days....find this solution and hope this will help you because it is soooooooooo easy finally!
Steps:
1) Download lenovo driver ( i think it is useless in fact but ok....just run it you dont have anything more to loose )
https://www.dropbox.com/s/frbpz16udrefoit/LenovoUsbDriver_autorun_1.0.112.exe?dl=0
2a) Download and install Minimal adb
https://www.dropbox.com/s/uvngsu4vz4hvsky/minimal_adb_fastboot_v1.1.3_setup.exe?dl=0
So now you have to use the right recovery image ( this file has to be inside minimal adb folder )....so here it is:
https://www.dropbox.com/s/ge05m1fe8n4qgb1/recovery.img?dl=0
2b)
Download this ROM ( this worked for me - with other i did try i did get an error )
http://www.needrom.com/download/lenovo-k910-vibeui-2-0/
prefer the last updated version ( 1501 )
Put this rom in the same ADB folder and renale zip in VIBE1411.ZIP ( in order to be easier later )
3) Turn off the device open Adb and write : fastboot boot recovery.img ( to have it ready )
4) Push volume + $ volume - at the same time and AFTER connect with usb to your pc - At the time the device will vibrate HIT ENTER in ADB
This will flash the recovery and after 1 minute device will open in a recovery screen with an adb update option ***
SELECT THIS adb update OPTION !
Your device kow it is ready to flash the new rom ! ( you will realize that everything is right from many usb beeps you will hear )
5)In adb console write : adb sideload VIBE1411.ZIP
This will take a little ....after that your device will reboot ! Dont panic if for a few minutes it will stuck in lenovo logo....
IT IS NORMAL AND YOU HAVE TO WAIT!
Hope this will help you.....please feel free to tell me if this worked for you.
C u
Same thing happens to my lenovo vibe z k910
buzzbuzz1 said:
Hi , this is my first time on the site , so forgive me if ive posted this in the wrong place.
I briked my Lenovo k910e running 4.2.2 rom with google apps purchased off Aliexpress.
What i did was run the flashrec.exe file for TWRP , but not until too late did i realise it was for 4.4.2 instead of 4.2.2.
Now i cannot boot the phone , TWRP was successfully installed and operational , but after about 20 reboots TWRP flash screen is stuck on the TeamWin logo and not accessable.
Ive tried mostl sugestions on this site and others without luck.
I can get the phone recognised with fastboot only after these commands ;
cd downloads
cd fastboot
adb devices
and it seems i may be able to push files to my device.
Is there a working link to the k910 OEM rom k910_ss_s_2_040_0109_131226 someone could direct me to.
All the links i have found so far are corrupted. Is there a way of repairing the TWRP recovery i have in the phone now.
Am I correct in assuming I have to install the OEM factory 4.2.2 ROM to wipe TWRP and istal Lenovo recovery ?.
Any help would be so appreciated. Thanks
Click to expand...
Click to collapse
After running twrp recovery it operates 3-4 times but now it flashes on twrp screen and screen goes blank and again flashes . I am unable to on it and as it shows only light and lenovo logo after that blank screen . Please help me in this. Its only detecting in adb recovery not any other mode.
lenove vibe Z k910 locked and stuck in logo
hello all
I ve done every word and many other tutorials but still the problem the same:
adb devices give just nothing
but fastboot devices gives the device
the driver is installed correctly detected in devices of the computer
here is the response for :fastboot boot recovery.img:
~/Desktop/lenovo]$ fastboot boot recovery.img (masterā±)
< waiting for device >
downloading 'boot.img'...
OKAY [ 0.536s]
booting...
FAILED (remote: Locked)
finished. total time: 0.538s
thanks for everyone to help
Boot into recovery under bricked condition
Today I bricked K910 after reinstalling GMS apk.
The phone hanged at boot logo.
Nothing can be from here.
I decided to take this risk.
I removed the back cover and disconnected the battery terminal.
After that I plugged back the terminal.
Several tries by power button and volume down to get into the recovery mode. All failed.
Each time it hanged at boot logo.
I have to redo the battery terminal unplug sequence again.
This is correct method to get into recovery mode.
Press power button and volume down till the Lenovo logo appears.
Move the power button finger to the position of the " Home " of the touchscreen position.
Hold till the recovery menu appears. Choose factory reset to erase the phone.
There was two lit small icon below. Make your choice.
The phone will be erased by reset.
Reboot after the process.
I solved my phone bricked problem.
Hope the method will solve your problem.
Good day to all K910 users.
my vibe z cannot access the recovery mode (PWR + VLM DOWN), it only vibrate. If turn on only stuck at Logo. Please help .
Please help me
I wiped all things including sd card.
I tried to reboot but then I realised I have not put any rom into sd card to flash and I rebooted anyway
Now I kept the SONY logo screen and COULD NOT enter recovery mode
Please help
My PC could not detect my Z2
What should I do to enter recovery mode to flash a rom to turn it on?
Thanks
Now I am trying to flash ftf using flash tool but may I ask how can I flash it if the PC could not detect my phone (still downloading ftf file)
http://forum.xda-developers.com/showthread.php?p=53220435
Here is a recovery guide
Your phone isnt being detected by your PC because it isnt turned off exactly
First of all I would thank Crowds he is the best reference that I've to return in case of any problem I face. (He doesn't sleep - any time I ask he immediately supports)
I bought Lenovo K910 and I've managed successfully to install new ROM "VIBEUI_v2.0_1443" and Gapps with Crowds support.
I advised two of my friends to buy this good and cheap phone. For one of them I installed the latest rom successfully. But with the other I had a big problem The phone stuck on Lenovo Logo.
I was trying to install TWRP 2.7.0.0 batch before installing my new ROM, but during installation and after the phone rebooting the batch command screen shows <Waiting for Device> and the phone is stuck on logo screen.
I tried to connect the phone to PC many times, but PC doesn't recognize the phone. When I try to turn off the phone by pressing the power buttons, the phone restart on logo screen like the shown in this video.
I've read in many site that I have to do the following:
Download and install "minimal adb and fastboot"
Just type on the command line without pressing Enter:
Code:
[COLOR="Blue"][B][I]fastboot [COLOR="Plum"][STRIKE]boot[/STRIKE][/COLOR] recovery.img[/I][/B][/COLOR]
you should place your recovery image file in "minimal adb and fastboot" directory
The phone should be disconnected from computer and completely off (press the Power button for 10 seconds - in my case the phone is restarting)
Press and hold both volume buttons, then connect the cable to the PC.
Once the phone vibrate, press Enter to execute the recovery command line
Click to expand...
Click to collapse
In my case when I press and hold power button the phone is restarting on logo screen so I have to wait for battery consumption
I tried many times with TWRP images but it failed...
I tried with CWM image and it succeeded to load, but I don't have otg cable to load recovery or ROM from usb storage (The problem was in installing TWRP and my ROM should has no problem)
I want to flash TWRP on phone not only loading by "minimal adb and fastboot".
I decided to flash TWRP 2.7.1.2 batch through modifying the batch file. I just used fastboot commands
Code:
[COLOR="blue"][I]fastboot oem device-info
fastboot oem unlock
fastboot oem device-info
fastboot [COLOR="Red"][U][B]flash[/B][/U][/COLOR] recovery data/recovery.img
fastboot flash aboot data/lock/emmc_appsboot.mbn
fastboot flash rpm data/lock/rpm.mbn
fastboot flash sbl1 data/lock/sbl1.mbn
fastboot flash dbi data/lock/sdi.mbn
fastboot flash tz data/lock/tz.mbn
fastboot reboot[/I][/COLOR]
Finally I succeeded to install Recovery and phone works well in the new recovery mode and the system mode that I've not update it yet
I want to share you the problem solution in brief:
Download and extract this file "flashrec TWRP v2.7.1.2" from here
Just select without executing "flashrec_Modified.bat" file from the extracted files.
The phone should be disconnected from computer and completely off (press the Power button for 10 seconds or wait for the battery to be almost empty)
Press and hold both volume buttons, then connect the cable to the PC.
Once the phone vibrate, press Enter to execute the recovery batch file
and as me the phone start the recovery mode in TWRP and can be rebooted in system without any problem
i must extract "flashrec TWRP v2.7.1.2 this file on phone or where? can u explain a
agsao said:
First of all I would thank Crowds he is the best reference that I've to return in case of any problem I face. (He doesn't sleep - any time I ask he immediately supports)
I bought Lenovo K910 and I've managed successfully to install new ROM "VIBEUI_v2.0_1443" and Gapps with Crowds support.
I advised two of my friends to buy this good and cheap phone. For one of them I installed the latest rom successfully. But with the other I had a big problem The phone stuck on Lenovo Logo.
I was trying to install TWRP 2.7.0.0 batch before installing my new ROM, but during installation and after the phone rebooting the batch command screen shows <Waiting for Device> and the phone is stuck on logo screen.
I tried to connect the phone to PC many times, but PC doesn't recognize the phone. When I try to turn off the phone by pressing the power buttons, the phone restart on logo screen like the shown in this video.
I've read in many site that I have to do the following:
In my case when I press and hold power button the phone is restarting on logo screen so I have to wait for battery consumption
I tried many times with TWRP images but it failed...
I tried with CWM image and it succeeded to load, but I don't have otg cable to load recovery or ROM from usb storage (The problem was in installing TWRP and my ROM should has no problem)
I want to flash TWRP on phone not only loading by "minimal adb and fastboot".
I decided to flash TWRP 2.7.1.2 batch through modifying the batch file. I just used fastboot commands
Code:
[COLOR="blue"][I]fastboot oem device-info
fastboot oem unlock
fastboot oem device-info
fastboot [COLOR="Red"][U][B]flash[/B][/U][/COLOR] recovery data/recovery.img
fastboot flash aboot data/lock/emmc_appsboot.mbn
fastboot flash rpm data/lock/rpm.mbn
fastboot flash sbl1 data/lock/sbl1.mbn
fastboot flash dbi data/lock/sdi.mbn
fastboot flash tz data/lock/tz.mbn
fastboot reboot[/I][/COLOR]
Finally I succeeded to install Recovery and phone works well in the new recovery mode and the system mode that I've not update it yet
I want to share you the problem solution in brief:
Download and extract this file "flashrec TWRP v2.7.1.2" from here
Just select without executing "flashrec_Modified.bat" file from the extracted files.
The phone should be disconnected from computer and completely off (press the Power button for 10 seconds or wait for the battery to be almost empty)
Press and hold both volume buttons, then connect the cable to the PC.
Once the phone vibrate, press Enter to execute the recovery batch file
and as me the phone start the recovery mode in TWRP and can be rebooted in system without any problem
Click to expand...
Click to collapse
Please explain me. idont know how to do
prxzero said:
Please explain me. idont know how to do
Click to expand...
Click to collapse
What Is your problem?
Is your phone stuck on logo screen? what were you doing to get the problem??
agsao said:
First of all I would thank Crowds he is the best reference that I've to return in case of any problem I face. (He doesn't sleep - any time I ask he immediately supports)
I bought Lenovo K910 and I've managed successfully to install new ROM "VIBEUI_v2.0_1443" and Gapps with Crowds support.
I advised two of my friends to buy this good and cheap phone. For one of them I installed the latest rom successfully. But with the other I had a big problem The phone stuck on Lenovo Logo.
I was trying to install TWRP 2.7.0.0 batch before installing my new ROM, but during installation and after the phone rebooting the batch command screen shows <Waiting for Device> and the phone is stuck on logo screen.
I tried to connect the phone to PC many times, but PC doesn't recognize the phone. When I try to turn off the phone by pressing the power buttons, the phone restart on logo screen like the shown in this video.
I've read in many site that I have to do the following:
In my case when I press and hold power button the phone is restarting on logo screen so I have to wait for battery consumption
I tried many times with TWRP images but it failed...
I tried with CWM image and it succeeded to load, but I don't have otg cable to load recovery or ROM from usb storage (The problem was in installing TWRP and my ROM should has no problem)
I want to flash TWRP on phone not only loading by "minimal adb and fastboot".
I decided to flash TWRP 2.7.1.2 batch through modifying the batch file. I just used fastboot commands
Code:
[COLOR="blue"][I]fastboot oem device-info
fastboot oem unlock
fastboot oem device-info
fastboot [COLOR="Red"][U][B]flash[/B][/U][/COLOR] recovery data/recovery.img
fastboot flash aboot data/lock/emmc_appsboot.mbn
fastboot flash rpm data/lock/rpm.mbn
fastboot flash sbl1 data/lock/sbl1.mbn
fastboot flash dbi data/lock/sdi.mbn
fastboot flash tz data/lock/tz.mbn
fastboot reboot[/I][/COLOR]
Finally I succeeded to install Recovery and phone works well in the new recovery mode and the system mode that I've not update it yet
I want to share you the problem solution in brief:
Download and extract this file "flashrec TWRP v2.7.1.2" from here
Just select without executing "flashrec_Modified.bat" file from the extracted files.
The phone should be disconnected from computer and completely off (press the Power button for 10 seconds or wait for the battery to be almost empty)
Press and hold both volume buttons, then connect the cable to the PC.
Once the phone vibrate, press Enter to execute the recovery batch file
and as me the phone start the recovery mode in TWRP and can be rebooted in system without any problem
Click to expand...
Click to collapse
Hi..
i just try to install CM12 to this device, with twrp 2.8.6.1 from master lie.
First time its working well, but suddenly this device restarting and stuck on the "lenovo" logo screen.
Every time i presh power button always restarting (like ON-OFF-ON-OFF forever).
when i connectto charger also restarting....
i cant go to twrp using vol- & pwr, when i use minimal adb cannot detected..
Can you help me...
Help
hi.
i try to do something to enable notifications on my lenovo vibe z.
i install new rom from needrom, but it didn't help. So i try to install other one, but i wipe my phone and restart without installed system.
Now when i go to twrp have just flashing teamwin logo, and only when phone is in this mode i can communicate through adb
i have checked many forums and try allot stuff to fix it but nothing works
Please Help!
U are not alone I also in same stage
Is there any one plz help
As long as the hardware is not physically broken, your K910 is unbrickable
http://www.teamsuperluminal.org/unbrick-lenovo-k910/
I followed the guide to revive my K910. You can refer to this forum post in which I documented my experiences:
http://www.teamsuperluminal.org/forums/topic/flash-back-to-lenovo-stock-just-temporarily/
nowbo said:
Is there any one plz help
Click to expand...
Click to collapse
Thanks for your reply
I will apply today. Hope for the best.
Will inform you as soon as this applied..
Have you fixed that problem?
Still at same stage
EcoDan said:
Have you fixed that problem?
Click to expand...
Click to collapse
Hi,
I am still on same stage (Black screen with lenovo logo). Try several ways but can't get out of this. Please help me If any one successful to startup this device or can get on the boot screen where I can do factory reset.
---------- Post added at 07:25 AM ---------- Previous post was at 07:21 AM ----------
wxppro said:
http://www.teamsuperluminal.org/unbrick-lenovo-k910/
I followed the guide to revive my K910. You can refer to this forum post in which I documented my experiences:
http://www.teamsuperluminal.org/forums/topic/flash-back-to-lenovo-stock-just-temporarily/
Click to expand...
Click to collapse
I Try this method but can't get out from that black screen ( Lenovo logo and powered by android)
My device is Lenovo Vibe shot Z90a40. I also try with boot unlock-er but nothing sitll work. So its about 20 days can't use my Lenovo Vibe Shot.
Please help me If you know how to get out of this issue..
Thanks
[/COLOR]
I Try this method but can't get out from that black screen ( Lenovo logo and powered by android)
My device is Lenovo Vibe shot Z90a40. I also try with boot unlock-er but nothing sitll work. So its about 20 days can't use my Lenovo Vibe Shot.
Please help me If you know how to get out of this issue..
Thanks[/QUOTE]
You need to carefully follow each steps in the method - if you short that magic pin and then connect the USB cable (with battery disconnected), your computer will report seeing the device at either COM port 9008 or 9006. Then you can download the factory image to revive the phone. Of course you need to have the right device driver installed. Like I said, as long as the hardware is not broken, this procedure will succeed for sure.
I love you man!
I love you man! I wish you all the happiness and wealth!:victory::victory::victory::angel::angel::highfive::highfive:
Hi.
I own a tablet Xperia Z2 (SGP521) with Android 6.0 with root, and I tried to install the "Z2-lockeddualrecovery2.8.26-RELEASE.combined.zip" file, but after I installed the file via "install.bat", I discovered that which I installed it wrong, but instead I had to install the file "TabZ2-lockeddualrecovery2.8.26-RELEASE.combined.zip".
And now my tablet keeps rebooting, how can I fix it?
Thanks in advance.
And I apologize for my English.
I solved the problem by itself, through Sony PC Companion.
Try this way:
Downgrad to 4.4.2 via ftf-file
root your tablet
install "Z2-lockeddualrecovery2.8.26-RELEASE.combined.zip" via install.bat from PC
After reboot in TWRP, do a factory reset and rebboot new in TWRP
Then install a new prerooted zip.file (***.575) via TWRP
My SGP521 work.... without bootloop...
xsecret said:
I solved the problem by itself, through Sony PC Companion.
Click to expand...
Click to collapse
how? im currently experiencing this,.
power off your tablet, hold volume up and plug in the usb cable .. wait for the blue led .. go to command windows, to your flashtool directory (sideload) , extract the latest boot.img out of the Remix Build rar, copy it to your flashload (sideload) directory and then enter in the command prompt
fastboot erase boot
fastboot erase recovery
fastboot flash boot boot.img
fastboot reboot
wait for sony logo on tablet and hit the power down button .. to enter recovery
unlocked bootloader u must have and the xperia tablet driver installed
Hi,
I have a G500TG (ASUS_Z00YD) v12.0.0.38, 5..1 ,rooted, (Asus Live Phone) and need the recovery.img or some info about how to recreate/generate this img from these possible sources:
- the phone itself - it is not bricked but without the recovery mode I cant flash OTA files, zip or adb files;
- I did a backup before I done the procedure to install TWRP, flashed recovery.img, but no luck with TWRP working and now the recovery mode boot skips to Asus Logo screen, no more dead droidboot screen;
- The backup has (.backup extension) but no clue how to unzip it on PC to search for this file
- a firmware/rom from official Asus , but inside the zip file there is no recovery.img only boot.img
Checked previous thread "http://forum.xda-developers.com/android/help/asus-zenfone-zc500tg-root-request-t3282861/page7" but the recovery.img from this is for another model phone ZC500TG / Z00VD and as I discovered did not work with my phone.
Tried to reset to original configuration from phone but when it starts after the confirmation it boots to recovery mode cannot find recovery mode and boots back to phone.
Tried copying firmware zip on internal memory to force an OTA update but again without recovery mode, no luck.
So if I cannot restore the recovery.img it will be stuck until a big error occurs.
Ah I can access ADB and Fastboot commands from PC - Dont know how to rebuid recovery.img using SDK from Google...
Tried to use SPFlashTools but could not make MTK Preloader function in W7 tried various MTK drivers... I think all depends on that driver to solve this problem
Any helpful idea?
Thanks in advance