Here you go:
https://1drv.ms/u/s!AshkuG2cY1T0xPZArSsy6iO1e_UnPw
This is a zip file with all the tools and files you need and instructions on how to use them.
What it covers:
Restoring bricked device (as long as download mode still works)
Unlocking bootloader (firmware dependent)
Rooting (any firmware)
Installing a custom recovery (any firmware)
Installing a custom ROM (any firmware)
I made this because all the guides for this phone were seemingly outdated, and some required tools and files were incredibly hard to find. Didn't want anyone else going through the pain I went through to break this phone open.
Thank you so much for uploading this. The charging port on my Nexus died and I have to use my old Note 2 as a backup, but I forget how this old piece of junk works. This should be very helpful.
I rooted and flashed twrp to boot to a triangle saying system software not authorized. Tried 3 firmwares and wont boot correctly. I got error about firmware update failed use kies... Kies won't do anything and kies 3 says unsupported device. On the 3rd firmware (root66 rooted stock ) firmware file I now am back to the original triangle system software not authorized by Verizon ..
How do I fix this?!?
robles4242 said:
I rooted and flashed twrp to boot to a triangle saying system software not authorized. Tried 3 firmwares and wont boot correctly. I got error about firmware update failed use kies... Kies won't do anything and kies 3 says unsupported device. On the 3rd firmware (root66 rooted stock ) firmware file I now am back to the original triangle system software not authorized by Verizon ..
How do I fix this?!?
Click to expand...
Click to collapse
Did you read my guide? You can't flash TWRP unless you successfully unlocked your bootloader with Casual, otherwise you are limited to SafeStrap. Also you can't restore with Kies, you have to use Odin and the files I've included to restore.
yambag said:
Thank you so much for uploading this. The charging port on my Nexus died and I have to use my old Note 2 as a backup, but I forget how this old piece of junk works. This should be very helpful.
Click to expand...
Click to collapse
Nice to see people still looking for something like this, so my guide wasn't for nothing!
I was geeked to see this!! but then i got "This item might not exist or is no longer available"
I take it back.. i let it sit on the "failed" page for like 2 min, and randomly it popped up with a download!
Well the auto bootloader didn't work, so now i'm at the root section. However i'm getting an error where ADB isn't detecting my phone. USB debug is on, and i'm definitely in media mode and not installer. The phone shows up in windows and looks good, but adb doesnt detect. I opened command prompt and ran adb /? and found adb devices -l, and it reports "list of devices" and theres nothing in the list. I can't imagine why it's not seeing it. I tried turning on and off debug mode, switching from camera mode to media, changing usb ports. still nothing comes up, but windows sees it fine. grrrr
*edit, well since we can't delete posts i'll leave this here, because i have to. But what i did was re-open the "no you verizon" and it showed DISCONNECTED also. I changed usb ports like 3 times, turned usb debug on and off, changed from installer mode, to camera, to media mode, restarted the phone and the computer multiple times.. and then it just all of a sudden was detected again. So i went with it and it seems to have worked.
-it took 3 times to actually work, you noted it may take multiples, and it sure did. I ran it through the command prompt so i could read the text, and it took 5 times longer and reported much more stuff when it actually worked.
-final edit: if you can't unlock your bootloader, you're still stuck with ditto or alliance from 2014, and lots of apps won't update on android that old. So if you thought this guide was some holy grail, it is not. But still useful if you need the assist, so thanks to the author.
Hi, total noob here, I just bought Verizon note 2 at a yard sale but there is a pin I don't know. When I went to do a factory reset it booted into TWRP, so I am assuming is rooted. Do I need to be able to get into the phone to use your tools? I know nothing about TWRP. I would like to install a newer Android version and unlock it so I can use TMobile. Thanks
Something wrong...
when i try to load this file from the packages folder i get an error message:
"md5 error! Binary is invalid"
none of the other three works for me. they all come back ailed.
any suggestions?
awesome! thanks for posting this, just found my old note 2 and want to get it up and running again for the kids.
Kudos!
Used this to get my Note 2 up and going again temporarily until the Pixel 4a release...
NOTE: I had strange issues with Odin on my modern X570 board (USB 3.2 Gen 2) where I did not receive any errors, yet the process would randomly seem to time out. Sometimes I'd get stuck at flashing boot.img, sometimes it would hang up at the start, once I got to flashing system.img and it seemed to hang....
Used an older PC circa 2013, no issues! Not the first time I've had issues with this newer motherboard and older USB flashing interfaces; had the same issue on my Note 8 (RIP) as well.
excited to try this.
I'm on some rooted 4.4.2 stock-looking rom. Recovery doesn't look custom.
Hoping to be able to install a working Oreo or Pie ROM
great post, bought a couple of these for almost nothing and am having fun playing with them. sadly they are both 4.4.2 but its great fun anyway.
SilentNightx said:
I made this because all the guides for this phone were seemingly outdated, and some required tools and files were incredibly hard to find. Didn't want anyone else going through the pain I went through to break this phone open.
Click to expand...
Click to collapse
Thank you for sharing. Always difficult to find those tools after a few years!!!
Related
Hi all,
I recently got a new Dell Venue 7 3740 (yeah, not my first choice, but it was free for buying a computer). Anyway, started reading up on how to root the thing. I have a couple of apps that require root.
I found this thread: http://forum.xda-developers.com/dell-venue/development/guide-how-to-root-android-4-4-4-dell-t2918427
and also the main Dell page: http://opensource.dell.com/releases/Venue_7_3740_Merrifield/developer-edition/
Following Dell's guide to rooting appears to NOT root it. Installing Root Checker confirms I don't have root. Unbricked it and got it back up from 4.4.2 to 4.4.4. By reading the first guide for the 3840, my question is ...
Is the boot image linked there compatible with my 3740?
(yeah, I know this should be in the developer section ... unfortunately I don't have enough posts ... also, I am familiar with rooting/flashing/etc, my first device that I put CM7 on was the original Galaxy S1 ... and I have CM10 on my S3.)
Tried, failed
Yeah I got this tablet with a PC too and tried rooting. It FUBAR'd on me and I had to wrestle with unbricking it. Which sorry to say is a job and a half, the images on Dell's site are corrupt for this WiFi only version (no partition.tbl file, system image incomplete). Ending up downloading the LTE versions firmware to get the missing files and rewriting the batch as the file names for the fastboot commands were wrong too. And even then the tablet wouldn't boot, so I had to store the OTA on an SD card and use recovery to flash it. Unfortunately that leaves me with 4.4.2 and the dreaded clock and browser issues. And OTA doesn't work, it keeps saying no updates are available. Spoke with a Dell rep who said OTAs were suspended and to try again in a week but I think OTA was broken for me when I tried rooting and boot loader was unlocked (which the PDF on Dell's site warns you about).
So now I have a working tablet that skips hours ahead and has general stability issues.
reaper-death said:
Yeah I got this tablet with a PC too and tried rooting. It FUBAR'd on me and I had to wrestle with unbricking it. Which sorry to say is a job and a half, the images on Dell's site are corrupt for this WiFi only version (no partition.tbl file, system image incomplete). Ending up downloading the LTE versions firmware to get the missing files and rewriting the batch as the file names for the fastboot commands were wrong too. And even then the tablet wouldn't boot, so I had to store the OTA on an SD card and use recovery to flash it. Unfortunately that leaves me with 4.4.2 and the dreaded clock and browser issues. And OTA doesn't work, it keeps saying no updates are available. Spoke with a Dell rep who said OTAs were suspended and to try again in a week but I think OTA was broken for me when I tried rooting and boot loader was unlocked (which the PDF on Dell's site warns you about).
So now I have a working tablet that skips hours ahead and has general stability issues.
Click to expand...
Click to collapse
Hmm ... Interestingly enough, I ran through the unbrick procedure from Dell, and didn't have any issues with it whatsoever. I'm not sure if they updated the TGZ since you updated.
I have read that root is for ADB to start with. Can anyone confirm this? If so, then which package could I get for a superuser binary?
ProfM2 said:
Hmm ... Interestingly enough, I ran through the unbrick procedure from Dell, and didn't have any issues with it whatsoever. I'm not sure if they updated the TGZ since you updated.
I have read that root is for ADB to start with. Can anyone confirm this? If so, then which package could I get for a superuser binary?
Click to expand...
Click to collapse
I did this process just a couple days ago so everything I pulled from opensource.dell was current. The unbrick tgz on the site shows up as 128mb for the wifi only A1195 and the A5195 shows as 821mb (odd). When I extracted the tgz it said "unexpected end" or something like that on the system image. Then again when I extracted from that extracted tgz.
Following the root process initially worked and the temp cwm recovery let me flash the supersu update. It booted with su just fine and I tried a couple apps that needed root and they worked. Once I rebooted again the tablet showed up with a USB icon and would go no further. Never having dealt with Intel SoC drivers it took me a while to get them installed properly, and then I eventually understood what "full power off" meant lol.
Do you know how I can relock the bootloader and get OTA working again, assuming I'm already on 4.4.2 from the OTA zip installed via recovery?
Thanks.
reaper-death said:
I did this process just a couple days ago so everything I pulled from opensource.dell was current. The unbrick tgz on the site shows up as 128mb for the wifi only A1195 and the A5195 shows as 821mb (odd). When I extracted the tgz it said "unexpected end" or something like that on the system image. Then again when I extracted from that extracted tgz.
Following the root process initially worked and the temp cwm recovery let me flash the supersu update. It booted with su just fine and I tried a couple apps that needed root and they worked. Once I rebooted again the tablet showed up with a USB icon and would go no further. Never having dealt with Intel SoC drivers it took me a while to get them installed properly, and then I eventually understood what "full power off" meant lol.
Do you know how I can relock the bootloader and get OTA working again, assuming I'm already on 4.4.2 from the OTA zip installed via recovery?
Thanks.
Click to expand...
Click to collapse
You better redo the unbrick procces cause as you are now, you won't be able to update your tablet and 4.4.2 has some issues with the clock and browser. The best way to root is by thetered cwm, I did it and it's working great.
reaper-death said:
I did this process just a couple days ago so everything I pulled from opensource.dell was current. The unbrick tgz on the site shows up as 128mb for the wifi only A1195 and the A5195 shows as 821mb (odd). When I extracted the tgz it said "unexpected end" or something like that on the system image. Then again when I extracted from that extracted tgz.
Click to expand...
Click to collapse
This is quite odd. From the documentation, it appears that the A195 is for the LTE version, and the A150 is Wifi only. Since I have the 3740 Wifi only, I only pulled the A150 version.
The Unbricking process was very straightforward and everything went smoothly, and after it rebooted, it prompted that there was a system update from Dell, and that took me from the 4.4.2 from the TGZ, to 4.4.4
ProfM2 said:
This is quite odd. From the documentation, it appears that the A195 is for the LTE version, and the A150 is Wifi only. Since I have the 3740 Wifi only, I only pulled the A150 version.
The Unbricking process was very straightforward and everything went smoothly, and after it rebooted, it prompted that there was a system update from Dell, and that took me from the 4.4.2 from the TGZ, to 4.4.4
Click to expand...
Click to collapse
http://opensource.dell.com/releases/Venue_7_3740_Merrifield/developer-edition/Doc/OSS_A150&A195.pdf
* For Wifi-only device on A150 and Wifi / LTE device on A195
I see it now, I think I was misinterpreting the above statement which means I've been flashing the A195 rom this whole time. Thank you all for your help! :good:
After getting my 3740 back to "Unbricked" mode, and OTA upgraded to 4.4.4, it appears that I'm completely locked out of the rooting process.
I've tried to start over with the Dell info (unlocking bootloader), however, neither of my PC's will detect the tablet when using xFSTK (one PC - Win8.1-64bit, other XP-32bit). The tablet IS detected, however, it appears that the drivers are no longer correct(?).
I normally run Ubuntu, and thats where my Android development setup is on ... I see that xFSTK is available for Linux ... has anyone used it? or would I be better trying to fight Windows?
ProfM2 said:
After getting my 3740 back to "Unbricked" mode, and OTA upgraded to 4.4.4, it appears that I'm completely locked out of the rooting process.
I've tried to start over with the Dell info (unlocking bootloader), however, neither of my PC's will detect the tablet when using xFSTK (one PC - Win8.1-64bit, other XP-32bit). The tablet IS detected, however, it appears that the drivers are no longer correct(?).
I normally run Ubuntu, and thats where my Android development setup is on ... I see that xFSTK is available for Linux ... has anyone used it? or would I be better trying to fight Windows?
Click to expand...
Click to collapse
It is mentioned somewhere that the 3740 and the 3840 use the same firmware. Assuming that, what you can do is download the latest SuperUser zip, copy it to the internal or external storage, then use THIS, or THIS to root through CWM.
graphdarnell said:
It is mentioned somewhere that the 3740 and the 3840 use the same firmware.
Click to expand...
Click to collapse
Hmmm ... I took this to mean that I could use the same boot.img as the Venue 8, and tried the process from this thread: http://forum.xda-developers.com/dell-venue/development/guide-how-to-root-android-4-4-4-dell-t2918427
NOPE. (Don't try, it'll cause the tablet to go into the "help my androids' fallen and can't get up" icon. )
ProfM2 said:
Hmmm ... I took this to mean that I could use the same boot.img as the Venue 8, and tried the process from this thread: http://forum.xda-developers.com/dell-venue/development/guide-how-to-root-android-4-4-4-dell-t2918427
NOPE. (Don't try, it'll cause the tablet to go into the "help my androids' fallen and can't get up" icon. )
Click to expand...
Click to collapse
I'm curious as to what it is you're trying to do. Why do you insist on having a developer's root (just the use of ADB shell), as opposed to full root flashing SuperSu from custom recovery?
graphdarnell said:
I'm curious as to what it is you're trying to do. Why do you insist on having a developer's root (just the use of ADB shell), as opposed to full root flashing SuperSu from custom recovery?
Click to expand...
Click to collapse
I just want full root.
Most of the info that I've read on here and elsewhere are geared to the 3830/3840. Not as much for the 3740. So, by playing with the device and learning what works/doesn't work, possibly others may find this info useful to them.
I've been having issues seeing the device from XP, Win8.1 and Ubuntu, in the 'off' state of the tablet, when the PC should be seeing the merrifield. Just this morning, after bricking it last night, I discovered that my PC seems to see the device right away if I press Vol+ while plugging in the microUSB. (again, something that may help someone else) I was planning on double checking this info later today, to make sure that it wasn't a fluke.
I do appreciate both of the links that you've posted in this thread, and I will check them out. Of course, both are labelled for the Venue 8, not the Venue 7 that I have. Since I've gained knowledge on the unbrick process I feel more comfortable trying them.
I've installed (or tried to install) SuperSU from the Play store, but it didn't appear to help much, since I didn't have the custom recovery setup at that time. I'll work on that tonight.
ProfM2 said:
I just want full root.
Most of the info that I've read on here and elsewhere are geared to the 3830/3840. Not as much for the 3740. So, by playing with the device and learning what works/doesn't work, possibly others may find this info useful to them.
I've been having issues seeing the device from XP, Win8.1 and Ubuntu, in the 'off' state of the tablet, when the PC should be seeing the merrifield. Just this morning, after bricking it last night, I discovered that my PC seems to see the device right away if I press Vol+ while plugging in the microUSB. (again, something that may help someone else) I was planning on double checking this info later today, to make sure that it wasn't a fluke.
I do appreciate both of the links that you've posted in this thread, and I will check them out. Of course, both are labelled for the Venue 8, not the Venue 7 that I have. Since I've gained knowledge on the unbrick process I feel more comfortable trying them.
I've installed (or tried to install) SuperSU from the Play store, but it didn't appear to help much, since I didn't have the custom recovery setup at that time. I'll work on that tonight.
Click to expand...
Click to collapse
A quick word on getting the device recognized in off mode, what worked for me was it needs to be completely powered off and nothing showing on the tablet screen then connect and bring up the device manager. Whatever shows up needs to be "Intel SoC" so change the driver to that if needed. When flashing firmware to unlock the bootloader the device's boot screen will show an "Intel Inside" logo instead of the normal "Dell" logo. I ended up running xFSTK commands in advance (they'll wait) and then running over to hook up the tablet (powered off) via USB as for some reason it'll show up and then I hear "da-Dunk" in Windows (device disconnected) after a short while which interrupts the process (same with fastboot commands). This was the unbrick process in a nutshell for me and I'm leaving it now as is (OTA'd to 4.4.4) until hopefully the supposed update to Lollipop comes around and maybe some progress is made on rooting it.
Hope this helps you!
reaper-death said:
A quick word on getting the device recognized in off mode, what worked for me was it needs to be completely powered off and nothing showing on the tablet screen then connect and bring up the device manager. Whatever shows up needs to be "Intel SoC" so change the driver to that if needed. When flashing firmware to unlock the bootloader the device's boot screen will show an "Intel Inside" logo instead of the normal "Dell" logo. I ended up running xFSTK commands in advance (they'll wait) and then running over to hook up the tablet (powered off) via USB as for some reason it'll show up and then I hear "da-Dunk" in Windows (device disconnected) after a short while which interrupts the process (same with fastboot commands). This was the unbrick process in a nutshell for me and I'm leaving it now as is (OTA'd to 4.4.4) until hopefully the supposed update to Lollipop comes around and maybe some progress is made on rooting it.
Hope this helps you!
Click to expand...
Click to collapse
I have finally settled down and got the tablet rooted. What's really odd, was Win8.1 kept losing the proper driver. I'm not sure exactly why ... but suffice it to say, I got it working. It did appear to be more stable when I hit the Vol+ and plugged in the USB, but then again it may have been a coincidence.
Open source dell
If you follow the link to dell open source, they do have a detailed PDF download for unlocking the boot loader etc. The file was too large for me to upload on XDA. I just found it today while I was researching how to root this tablet. I have not had a chance to try it yet.
http://opensource.dell.com/
That doesnt work for 3740 lte. I;ve done everything that was in PDF. OTA image should be with unlocker bootloader and root but its not. ;/
Its adb root not su big difference
Does anyone have any idea to root dell venue 7 3740 lte
The open source is for venue 7 3740 wifi
how can i hard reset this device please tell me.
Mahisasur said:
how can i hard reset this device please tell me.
Click to expand...
Click to collapse
Reset any android tbalet with ...
Setting >>>>> Backup & Reset >>>>> Factory Data Reset >>>>> Reset Tablet >>> Erase Everything
Plz pardon my rant but I need major helpppppppppp lol, I've spent days scouring this site & google to try to fix this myself. I've built pc's but delayed learning droid because it's worse then mickersoft from what I've seen. I babysit for a lady raising her 3 granddaughters, they don't have net & were only able to access a few things. Sooo I volunteered to add some games, I was so flabbergasted at the bloat, shear greed and limitations of both versions of dis ui. I wanted to just disable it to use a different launcher but nooo to easy. no good deed goes unpunished lol. I updated the stock to the current as of two weeks ago ota kitkat and it went down hill fast, the dis ui worked for the most part but it wouldn't let me in the settings that's on the nabi mode for no apparent reason.
So not being able to find much current info for dis version, I made the huge mistake of using kingroots apk. it chocked but then work fine except I still had the above problem. no matter what I tried to clean or debloat. I got stupid tired and did a factory reset it now won't boot fully. I only get a pop up loop even in safe mode of nabiSetup has stopped. I can only turn off but can access recovery and the fastboot etc! I give it wins this round lol.
I have tried both win 10 32 & 64bit I only got it to connect once, it said I unlocked the bootloader but nothing can find the device to reboot-bootloader thru adb or NabiLab, 15 sec abd and etc. I'm to tired to think straight and to new to this so I must be missing something. there has to be away to get droid back on it! I can usually access the tablet and the sd card thru win explorer but no matter witch drivers I've tried it will not connect properly or the drivers won't install fully even with drive sig disabled. so it has to be because of the bitmap error I found in recovery or because it won't fully boot to access the usb on the tablet??
cliff-notes
1. the devise will not fully boot I get a nabiSetup has stopped popup loop in normal & safe mode I can only shut it off.
2a I can still get in recovery I tried to flash it but I assume I was using the wrong file nothing would load, but noticed E: missing bitmap stage_empty & stage_fill it seems to be a common droid problem but no info to be found for this devise version.
2b In the device manager fastboot comes and goes or I see a USB device descriptor failed or set address I think it was and pdanet stalls. I'm gonna fdisk laptop again it's had way to many driver attempts to be sure that's some of problem not operator error or usb in a mood again.
3. being brain-dead tired & a droid newbieish. I can't get to the usb to play nice so I can't install twrp. I assume because of the usb drivers ie google and etc not showing up right in device mangr. no usb on nabi which I just remembered the developer options vanished, that's why I decide to reset since what I think is the reset pinhole didn't work?
p.s I can access win explorer most of the time. the common droid/disney folders are showing but I'm unclear what all is missing.. can someone please give me a laymens clue how to get the os back on it. I deleted the cache and etc to no avail. I pieced together other peeps info here but so far I'm special no one has my exact errors lol. my gut says it's fixable from what I have read it seems to makes a difference its a disney version I don't care what's on it as long as it works at this point any ideas or help is deeply appreciated. I'm running win 10 ent 64bit at the moment and it was stock disney version of NABI2-NV7A-US-D with 4.4.1 before bad update of kitkat ota.
Twink225 said:
Plz pardon my rant but I need major helpppppppppp lol, I've spent days scouring this site & google to try to fix this myself. I've built pc's but delayed learning droid because it's worse then mickersoft from what I've seen. I babysit for a lady raising her 3 granddaughters, they don't have net & were only able to access a few things. Sooo I volunteered to add some games, I was so flabbergasted at the bloat, shear greed and limitations of both versions of dis ui. I wanted to just disable it to use a different launcher but nooo to easy. no good deed goes unpunished lol. I updated the stock to the current as of two weeks ago ota kitkat and it went down hill fast, the dis ui worked for the most part but it wouldn't let me in the settings that's on the nabi mode for no apparent reason.
So not being able to find much current info for dis version, I made the huge mistake of using kingroots apk. it chocked but then work fine except I still had the above problem. no matter what I tried to clean or debloat. I got stupid tired and did a factory reset it now won't boot fully. I only get a pop up loop even in safe mode of nabiSetup has stopped. I can only turn off but can access recovery and the fastboot etc! I give it wins this round lol.
I have tried both win 10 32 & 64bit I only got it to connect once, it said I unlocked the bootloader but nothing can find the device to reboot-bootloader thru adb or NabiLab, 15 sec abd and etc. I'm to tired to think straight and to new to this so I must be missing something. there has to be away to get droid back on it! I can usually access the tablet and the sd card thru win explorer but no matter witch drivers I've tried it will not connect properly or the drivers won't install fully even with drive sig disabled. so it has to be because of the bitmap error I found in recovery or because it won't fully boot to access the usb on the tablet??
cliff-notes
1. the devise will not fully boot I get a nabiSetup has stopped popup loop in normal & safe mode I can only shut it off.
2a I can still get in recovery I tried to flash it but I assume I was using the wrong file nothing would load, but noticed E: missing bitmap stage_empty & stage_fill it seems to be a common droid problem but no info to be found for this devise version.
2b In the device manager fastboot comes and goes or I see a USB device descriptor failed or set address I think it was and pdanet stalls. I'm gonna fdisk laptop again it's had way to many driver attempts to be sure that's some of problem not operator error or usb in a mood again.
3. being brain-dead tired & a droid newbieish. I can't get to the usb to play nice so I can't install twrp. I assume because of the usb drivers ie google and etc not showing up right in device mangr. no usb on nabi which I just remembered the developer options vanished, that's why I decide to reset since what I think is the reset pinhole didn't work?
p.s I can access win explorer most of the time. the common droid/disney folders are showing but I'm unclear what all is missing.. can someone please give me a laymens clue how to get the os back on it. I deleted the cache and etc to no avail. I pieced together other peeps info here but so far I'm special no one has my exact errors lol. my gut says it's fixable from what I have read it seems to makes a difference its a disney version I don't care what's on it as long as it works at this point any ideas or help is deeply appreciated. I'm running win 10 ent 64bit at the moment and it was stock disney version of NABI2-NV7A-US-D with 4.4.1 before bad update of kitkat ota.
Click to expand...
Click to collapse
It's hard to understand all of that but it sounds like perhaps you deleted some bloat that you should have, you sound like having driver issues, and possibly wrong TWRP version. Need to clear that up and then reinstall the stock Disney ROM.
I'd start here it has all the tools/TWRP/ROM's you need.
http://forum.xda-developers.com/nabi-2/general/nabi-information-t3229119
So sorry hun, toshiba is driving me nuts and I'm having a bad add moment or three lol. I read about you retiring. so I tried hard not to bother you. now I'm really confused. I've read your nabi2 general info post and even ran across your youtube vids. the problem is I'm not familiar with adb. & the included NabiLabGUI drivers, win10 either fails to finish saying it was interrupted. or it just won't install the 32 bit drivers, I thought I as suppose to use.
The 64bit driver 3 out of 4 install but, I can not get the Google Inc, driver to install properly even with the inf file. (ie the android_winusb.inf ) it says the system can't find the file, it can install the older versions from NabiLabGUI or naked drivers. but doesn't show in add/remove and it still won't detect the tablet most of the time lol.
Pda also has conflicts with adb, I got the nablab disney option to detect it but still failed to install twrp saying it can't find devise and I noticed in device manager 2 driver problems that will not let me update manually or they go missing if I try to force windows to reinstall. (device descriptor request & set address failed)
I must be missing something big, I also tried the 15sec and minimal adb. I assume because the tablet won't fully boot up, windows doesn't know what to do with it. when I tried different cables. windows 10 enterprise won't play nice at all now. so I will format again to be safe but lost what to try next.
I guess my questions should be is there a work around or a full inf version of the newer drivers for NabiLabGUI2015 that might work with this demonic disney nabi2.
&
Is NabiLabGUI compatible with .net framework 4.6 advanced services? (I may have to downgrade o/s. on the nabhacks site is says .net 4.5 is a prerequisites.) I don't know much about the app but saw 4.6 comes preinstalled, I can't install 4.5 yet, I saw there has been compatibility issues. and it won't let you revert versions easily if at all.
I'm to tired of this tab to think straight anymore and so grateful any help I'm in way over my head here.
Update
I lost the battle but I won the war, now google & supersu are messing with me as usual but it boots so I win lol :victory::silly:
I recently received both my Nexus 5 and LG G4 second hand boot-lopped and I, with prior experience, hopped to restore them. I downloaded all the images and firmware needed and tried to get the most recent versions to avoid any downgrade problems. Then everything went south. Using the lg tool, the G4 got flashed 100% but then that was it. It would not boot up and not turn on. My computer would recognize it but it would leave me a "Unknown USB Device (Device Descriptor Request Failed)" message. At that point I lost hope and moved onto the nexus 5. I used wugfresh nexus root toolkit and went through the usual process of unlocking boot loader and downloading image. Well when it started to flash boot.img it restarted and that was it as well. Now both my nexus 5 and lg 4 are dead and leave me the same message when plugged in. I'm very confused as to what has happened. I've done this dozens of times before and it has never given me this. I believe they are hard bricked now and i dont know why. Is it Windows 10 anniversary update? Is there a solution? I'm desperate and lost at this point because I cant find anything online. (Not able to access recover mode on either). Please help.
Check this out, there are a couple of videos too. Also, how did you flash your nexus 5 image, did you use adb or fastboot? As for the LG phone, take a look at this thread, it might be a hardware issue that is LG's fault.
RAZERZDAHACKER said:
Check this out, there are a couple of videos too. Also, how did you flash your nexus 5 image, did you use adb or fastboot? As for the LG phone, take a look at this thread, it might be a hardware issue that is LG's fault.
Click to expand...
Click to collapse
Thanks I'll look into it. As for the Nexus 5, it was done through adb. The thing I'm not understanding is why it happened. Usually my nexus devices don't get bricked like this and it weird that it happened to both of them
The0nlyboss said:
Thanks I'll look into it. As for the Nexus 5, it was done through adb. The thing I'm not understanding is why it happened. Usually my nexus devices don't get bricked like this and it weird that it happened to both of them
Click to expand...
Click to collapse
I recommend flashing via fastboot instead (fastboot flash boot.IMG) But you'll have to look into the link to solve the driver issue.
I'll try to get as straight tot he point as possible.
Been using my Mobile one touch pix 7 for a little over a year and always installed Ota updates. Well I rooted the tablet not too long ago, forgot which method I used, but was working fine.
an Ota update came through and totally forgot it was rooted, and tried to install it, at which point the whole tablet got bricked.
It ended up in recovery, and I selected due to failure, to format and wipe the data.
Anyhow, The unit will stay at the boot screen for a while then show command error and then show the recovery screen, my only options are:
reboot
update from sd card
update via adb
update via memory
reboot Bootloader
power off
Well I've tried updating by downloading system images via adb, they return a verification error.
I've tried using adb side load to try to install an Ota update file I found for it, returns a verification error.
I cannot get into download mode, fast boot mode I think does not work as windows reports 3 android devices, but the mobile update software cannot see anything, and fast boot gets stuck at waiting for devices.
I suspect the tablet is for lack of a better description totally bricked and just a paperweight.
I am at a loss of what to try from this point. I'm sure wiping the data after the failed update killed it completely but not sure.
Anyone have any guidance here? I've downloaded a few images from the web I found that say they are for this tablet model, but still getting verification error.
Is there any flashing software I can get that may be able to access the tablet or can I copy a file to the scared and have it try to run an update from there. I don't care if it is rooted or not, just want to get it usable again.
I can run Mac OS, windows 10, windows 7, windows xp, or even have no issue getting a linux version going, whatever will work best for this I can use it. windows 10 I was able to manually add the drivers but windows 7 is not letting me do it the same way. I can connect via adb sideload only, no other adb functions seem to work.
I'm not a total news when it comes to custom rooms, as I have done it with another tablet, and an android car radio, but those were pretty straight forward and bootable so never ran into a brick issue yet.
I have a feeling this is toast and I hope that is not the case.
If anyone here can help out, I would appreciate it.
Thanks again....
Need help here to. Been searching with no luck. Any my issue is.
Rooted kingroot, flashed twrp with flashify and now I'm stuck on twrp. Been searching for any custom stock rom. I forgot to unlock the bootloader but I did enable usb debugging (i didn't see any oem options).
Any k 28532Jonsunf of help would be greatly appreciated.
This sorta happen to me. I rooted pixi 7 with kingroot, and was able to delete a lot of bloatware. However, when I was using lucky patcher it pretty much messed up the play store. But it was fine. I could download stuff through the Internet. But sooner or later I needed to fix it. Tryed a lot of ways but it didn't help. So I factory reset the tabletand now im stuck at the Setup Wizard. It just won't let me let me through. I thought its was over, but then I get a message saying there is an update available. So I download it and installed it. But all I get at the end is error. So now I need to flash it with stock. I tried the img. too, but it doesnt show up in the recover menu. If you found a solution please tell me
Can anyoonneee help me find a good Custom Rom for the alcatel one touch pixi 7 (9006W)? Sucks that there's not much info for this device (probably cause the device sucks lol) I'm running on lollipop 5.0.2 and am not able to get OTA update due to rooting. Unrooting didn't help. It seems only answer is custom rom but don't want to risk bricking it as I don't have a computer at home. Also, I am new to this so if anyone can share some insight, I'd be eternally grateful
P.s
It's a t mobile device but I only use it on wifi.
Am using kingroot.
Have never installed a custom rom
****ing device is 8 gigs. 1 gig Ram.
Is it possible to get Nougat?
Help meeee lol
So I got a cheap android tablet and I wanted to root it. I was successful so I decided to install TWRP. I searched for my specific model and found an image on a german forum. I downloaded and flashed it and it got stuck in a reboot loop. So I looked at the image and it was for the QV1030. I tried to get it into recovery but couldn't. Many sources told me to hold Vol Up and Lock, and I tried this and more. Nothing would make it enter recovery mode. Then I read about SP Flash Tool and found the stock rom for the tablet and decided I would try to flash that. It kept coming up with an error, and every source online told me to format the flash except for the bootloader and then I could flash it. So I did. Now it doesn't show anything on screen, and SP Flash Tool comes up with error 6045. But it does show up in device manager under com ports as, "MediaTek USB Port" so I think I can still do something about it. I don't have any backups. I don't know what I'm doing. I require assistance please.
So I reflashed the entire backup and it come up with no error. The logo comes up and it plays the chime. The logo does this little shimmer effect and once it gets to this screen, it shimmers indefinitely. If I plug it in, it begins installing a driver and then stops part way through.
drsinclair said:
So I reflashed the entire backup and it come up with no error. The logo comes up and it plays the chime. The logo does this little shimmer effect and once it gets to this screen, it shimmers indefinitely. If I plug it in, it begins installing a driver and then stops part way through.
Click to expand...
Click to collapse
I left it for about 5 minutes and it finished the driver. I thought it froze but I was wrong. It shows up now on device manager under Portable Devices as, "MTP USB Device". I tried to see if it was listed as a device by ADB. It is not. Lets just say I've already learned a thing or two about this stuff. Good thing I did it on an 80 dollar chinese tablet and not my HTC One M9
drsinclair said:
I left it for about 5 minutes and it finished the driver. I thought it froze but I was wrong. It shows up now on device manager under Portable Devices as, "MTP USB Device". I tried to see if it was listed as a device by ADB. It is not. Lets just say I've already learned a thing or two about this stuff. Good thing I did it on an 80 dollar chinese tablet and not my HTC One M9
Click to expand...
Click to collapse
I got it to work again mostly. So I realized that I wasn't flashing the whole backup. Some things didn't have a path and I had to set it manualy. Now it has CFW for some reason, but I reset it and it works now. The only thing is WiFi is not turning on. Any ideas about that?
drsinclair said:
I got it to work again mostly. So I realized that I wasn't flashing the whole backup. Some things didn't have a path and I had to set it manualy. Now it has CFW for some reason, but I reset it and it works now. The only thing is WiFi is not turning on. Any ideas about that?
Click to expand...
Click to collapse
I actually want to upgrade this from Android 4.2.2 to a more recent version. Do you guys have any ideas about that?
So I've come to the conclusion that while the device is no longer bricked, the current installation is written over the old one and things are conflicting. I know this because I looked through the cache and found filenames referring to apps I had installed before breaking it. So would the solution be to wipe the system partition and reflash the system.img so everything is fresh? Or does the problem lie elsewhere.
I formated the system partition, used SP Flasher to flash system.img and then did a factory reset. The issue has still not been solved. And now that I have done that, I don't have root access anymore. Framaroot says it was successful and I restart and check root explorer on ES File Explorer and it doesn't work.
I gained root access using a different method. However the WiFi still doesn't work. I think it may be that the mac address information was from the backup I flashed from the internet, and therefore doesn't match. I found a guide that tells me how to hex edit a file and put in my real mac address, but it's unavailable under wifi. I don't have the sticker on the back that says it either. How else can I find it?
Turns out the mac address can be anything. I used SN Write tool and an AB DB for my chipset and it still didn't solve the problem. I have no idea what to do. Can anyone help me?
I fixed the issue by grabbing a different backup from some russian website and flashing the system.img and secro.img to it. It now works fine 100%. Thanks
help - link
drsinclair said:
I fixed the issue by grabbing a different backup from some russian website and flashing the system.img and secro.img to it. It now works fine 100%. Thanks
Click to expand...
Click to collapse
Hey man! I have the same problems with my QV 830. Can you give me the link for system.img and secro.img, please?