Hello,
when I'm in TWRP 3.2.1-0 my computer (Win10) doesn't recognize my Z5C. I hear the sound that a device is detected but it does not appear. Also not in the device manager.
But if I start it normally it works without problems. It occurs only in TWRP and only on my Windows computer. Even if I start a VM on the same computer, the Z5C is found in the VM. Windows 10 and also Linux Mint19.
I have already deleted all drivers and reinstalled them. Does anyone else have a tip? My Z3C is also recognized without problems in TWRP on the same computer.
Related
Hi everyone,
i'm having difficulties to connect my sgs2 to a pc.
i have tried it on 3 different machines (win7 64, win7 64, winxp 32) with the same problem:
I works fine when i first connect the phone in download mode. But as soon as i disconnect the cable i can't connect it again. Windows sais that it doesn't recognize the device and that's it. The device manager shows an "Unknown Device" under USB-Controller. And i am not even able to install drivers by manually pointing windows to a file.
as already sais, i have tried that on 3 different machines. I have tried installing driver via kies and via the driver file that is available here in the forums. i have also tried different usb ports.
Any ideas?
Goddchen
EDIT: Maybe this is an important information: the phone connects fine as long as it is running (can be found via adb, logcat is working, etc...) it only makes problem when in download mode...
I had exactly the same issue yesterday on my Windows 7 box. In the end I connected the phone in normal (not download) mode. Into device manager and uninstalled the drivers through there.
Then I uninstalled Kies and reconnected the phone, I allowed Windows to search windows update to find drivers (not that it did as it couldn't find any and reverted to the local ones. Then disconnect the phone, re-install Kies, run the install drivers from the tools menu, close Kies. Run up Odin and the connect the phone in Download mode, low and behold 2 minutes later after a lengthy installation process the phone was picked up.
I tried a number of things but for some reason this specific order seemed to sort it.
Hey,
thanks for you hints. But they didn't work for me.
I found the problem: believe it or not, it was THE CABLE. I went and got another cable and this one is working fine all the time. The other one doesn't... Very strange...
For whatever reason fastboot on my PC (win10) doesn't detect my phone, adb detects it fine when it's in recovery or booted normally, I cannot send fastboot commands as it says waiting for device. I've tried a few things like the LG Mobile Driver and a universal driver but it still isn't working. Any ideas?
Just to clarify I am in Fastboot mode when trying this.
Edit: Also tried the Google USB drivers from the SDK manager, didn't make a difference
I ended up simply doing it on an Ubuntu installation. Works perfectly on there, not sure why Win10 doesn't work though.
My problem is solved.
Hi!
I have searched XDA forum and other forum concerning LineageOS. But I have not found a solution.
My latest experiments were with installation of the adb interface on windows. At first, this worked well and I got full massstorage access. The Galaxy and its both memories did show up in Windows Explorer (like in old ages).
At the next restart of Windows (Win 7 64-bit Pro) when I connected my phone, Windows immediately did install the samsung drivers again. And since that things got even worse: No even the MTP and PTP Mode did not work, so that the Smartphone does not show up at all in the Windows Explorer!
At F-Droid, I have found an app, called USB Mountr. I tried this, but without any effort.
In the device manager of Windows I can see an „Android Composite ADB Interface”. It tells, that the device would work OK.
Now I am stuck with this and I hope, someone will help me, to activate usb massstorage access.
BTW: I have flashed my Galaxy S2 with Heimdall, running on Ubuntu. Heimdall on Windows 7 did not work, because of libusb error -12.
Latest status:
I have uninstalled the app USB mountr and did reboot the phone. Now the USBconnector is only active for charging the battery. I even get no connection in PTP or MTP mode.
Then I have deactivated USB debug mode and ADB. did a reboot, reactivated ADB and USB debug etc. and did further reboot the phone but with no success.
USB connection is nearly dead and cannot have connect with LUBUNTU Laptop. On Win 7, I get the signal tone, which is typical for connecting an USB device. The GT.i9100 shows up in Explorer but cannot be connected. Device manager tells me, that it is an Android device and all would be OK.
As a work around I am using MyPhoneExplorer on Win-7 and KDEconnect for Ubuntu.
Please can anybody tell me, what I should do, to get back at least USB connection in MTP or PTP mode???
I have the exact same problem.
I did notice, that after first boot, there was a message (several times) the MTP daemon/service stopped working (Crashed ?)
Does anyone else encounter this ?
Did anyone else resolve this ?
(Currently I was only able to get/send files to the device via BT, which is slow, annoying,
and a lot of work moving files to their required places after transmitting over BT)
Quick Fix for stuck on boot
This probably isn't the right place but you said there weren't many solutions. If your phone randomly gets stuck on boot you need to Delete Everything including system, factory data reset, flash ROM again with ADB, go through setup. The reason it probably hanged is because you installed an old version of SuperSU Binary or because you flash OpenGapps before setting up phone.
Hope this works
P.S Sorry for the late reply
I have been trying to connect my phone to laptop, the last time I tried was before the nougat update and it worked. I have tried several different cables, booting the laptop in both win10 and ubuntu. I have installed the correct drivers, updates etc, also tried resetting the phone and resetting win10.
Other phones (Samsung j3 & htc desire) work on both operating systems so I assume it must be the phone.
Anyone have an idea?
If you're meaning connecting to a PC to access data? Then I'm having the same problem. Even when selecting MTP for file transfers. Device manager on PC says it's connected and usable but it doesn't show up anywhere...
...for some odd reason it works just fine when you mount it to a PC in TWRP.
Mine won't show up anywhere, and I don't have twrp. Contacted wileyfox and they want me to send the phone for repair.
Whenever I boot my phone into fastboot mode and connect it to my computer, the fastboot logo disappears and is replaced by the message "press any key to shutdown". Miflash says that there is no device connected. I have tried switching ports, I am running windows 10 64-bit with and Intel CPU. I installed the latest drivers and it still hasn't worked. I double check USB debugging and OEM unlocking were enabled.
Same here, minus the shutdown message. Unable to connect to misuite either. No problem connecting via windows explorer.
veekay said:
Same here, minus the shutdown message. Unable to connect to misuite either. No problem connecting via windows explorer.
Click to expand...
Click to collapse
About the MiSuite thing, that is no longer supported for devices running above MIUI 7, so you shouldn't be worried about that
Well, at least that is one problem solved. Silly, but whatever. Still leaves us both unable to use miflash.
Of course I try my wifes laptop and it works instantly. 72 hour wait now. No idea why neither of my two laptops work with it.
Just wondering, what operating system does your wife's computer run? I heard using windows 7 fixes the problem in some cases.
We both run Windows 10 - x64 and Intel.