Related
First of all, Happy New Year Guys... Hope This year would bring loads of happiness in your life.
i got some surprise for you.
The new SE firmware rooted.
Guys the new firmware for x10 mini pro i.e 2.0.2.a.0.24 prerooted and xrecovery installed...
For Guys who have already updated to that firmware:
In order to install this firmware, you need to install xrecovery first.
Also if you have already flashed with 2.0.2.A.0.24 through SEUS, please downgrade!
Requirements:
DOWNLOAD>>X10 mini pro flasher
DOWNLOAD>>2.0.2.A.0.24PACK.zip
Instructions:
1. Download and unpack 2.0.2.A.0.24PACK.zip. It contains 2 files: update.zip and 2.0.2.A.0.24FlasherFiles folder
2. Copy update.zip to SD Card
3. Copy 2.0.2.A.0.24 FlasherFiles folder inside the flasher's folder.
4. Boot into xRecovery and install update.zip
5. Open flasher and press "Flash" tab
6. Choose "2.0.2.A.0.24FlasherFiles" and flasher will show "Searching for Xperia..."
7. Plug the phone on usb
8. Choose "Reboot" option on recovery and right after the screen goes blank, keep the "back" button pressed until the green light is on.
If you don't succeed at first, press home and on/off button while connected on usb and simultaneusly "back" button.
Make sure you understand the installation process before you try!
How To Downgrade:
1. Use any firmware from here.
2. Flash your mini with X10 mini pro flasher.
3. Then after the downgrade use SuperOneClick for root.
4. Install zdzihu's xrecovery mod.
5. Then Go to Instructions above and read the next step.
If u Like to Help Me :
(Wanna buy sony ericsson x10 mini pro case)...
After root of new firmware use this script to install the following features:
1. Reboot
2. Jit
3. App2sd
u can get this script here. (Thanks to galaningenieros for his awesome work)
Credits:
All credits go to:
zdzihu, for xrecovery and for all this actually, as i followed his method.
Bin4ry for the flasher..
aZuZu for his SIN2IMG tool. Works great!
For Keyboard Problems Go here.
DISCLAIMER: I AM NOT RESPONSIBLE IN ANY WAY, IF YOU BRICK YOUR DEVICE.
USING THIS METHOD AND FILES, IS DONE BY YOUR OWN CHOICE.
What is the difference between this ROM and build 2.0.1.A.0.47? My Xperia X10 Mini Pro (U20a) officially gets 2.0.1.A.0.47 instead of 2.0.2.A.0.24. Can I safely install this version instead?
Thank you in advance.
Never mind, I already found out that this is a more recent version, it is basically the latest update that SE released for the X10 family.
I installed this ROM on my X10 Mini Pro U20a and can confirm that it works like a charm, thanks so much. Great job! I have root access and so far everything is working perfectly. I will proceed to delete some bloatware and finish restoring backups and configuring system settings.
xRecovery is simply awesome, especially taking into account that it is in such an early development state.
I'm incredibly happy with this update. Thanks to shivenjuneja, Bin4ry, zdzihu and aZuZu for the hard work and for making this possible.
Thanks man m happy u like it.
Hi cheers for info etc, just a quick question, I uploaded xrecovery for the x10 but it doesnt seem to work on the mini pro my phone is rooted etc and has busybox
I have tried the xrecovery for the mini pro but as it has to be installed via root explorer, not sure how to do it, even though its explained
Cheers Steve
Assuming you currently have root access.
Just download xRecovery here, then extract the three files and copy them to the /system/bin folder. Finally, reboot your phone and start pressing the back button repeatedly as soon as it starts booting up again (don't wait until you see Sony Ericsson on the screen, start doing it before). xRecovery should start right after the white Sony Ericsson logo.
was happy with it until i realized there may not be many themes or roms for this fw version, downgraded
u can use any theme on this framework just copy services.jar,framework-res.apk,android.policy.jar,framework.jar from the old framework to this...
Can anyone from brazil post here a build.prop for 2.0.2.a.0.24 (x10 mini pro U20a)??
now you can root your mobile using the application no need of flashing the firmware... u can find it here
shivenjuneja , work whit Black HTC Theme or only for themes of 2.0.2.A.0.24?
Nice work ...
Thanks a lot for this! I reflashed my mini pro with this firmware to change back to U20a to get 3G and it's working great
but this firmware change the language ? I've a italian x10minipro
Anyone else having issues with the gps?
Anyone else having issues with the gps? I seem to lock on to a signal, but Ndrive keeps telling me I am off any road. It was working great with 1.6. Other than that, this is rock solid
have 3G lost Wi-Fi
I have two of the Xperia Mini Pro handsets, one is flashed with the u20i firmware ( I should be using u20a) and it works well enough
But flashed the other with the firmware for this country and my carrier(u20a) and the 3G is flakey (probably the carrier) but I can't connect to any Wi-Fi networks.
- Not even the wireless router next to my left elbow, here, on the desk,
shivenjuneja said:
First of all, Happy New Year Guys... Hope This year would bring loads of happiness in your life.
i got some surprise for you.
The new SE firmware rooted.
Guys the new firmware for x10 mini pro i.e 2.0.2.a.0.24 prerooted and xrecovery installed...
For Guys who have already updated to that firmware:
In order to install this firmware, you need to install xrecovery first.
Also if you have already flashed with 2.0.2.A.0.24 through SEUS, please downgrade!
Requirements:
DOWNLOAD>>X10 mini pro flasher
DOWNLOAD>>2.0.2.A.0.24PACK.zip
Instructions:
1. Download and unpack 2.0.2.A.0.24PACK.zip. It contains 2 files: update.zip and 2.0.2.A.0.24FlasherFiles folder
2. Copy update.zip to SD Card
3. Copy 2.0.2.A.0.24 FlasherFiles folder inside the flasher's folder.
4. Boot into xRecovery and install update.zip
5. Open flasher and press "Flash" tab
6. Choose "2.0.2.A.0.24FlasherFiles" and flasher will show "Searching for Xperia..."
7. Plug the phone on usb
8. Choose "Reboot" option on recovery and right after the screen goes blank, keep the "back" button pressed until the green light is on.
If you don't succeed at first, press home and on/off button while connected on usb and simultaneusly "back" button.
Make sure you understand the installation process before you try!
How To Downgrade:
1. Use any firmware from here.
2. Flash your mini with X10 mini pro flasher.
3. Then after the downgrade use SuperOneClick for root.
4. Install zdzihu's xrecovery mod.
5. Then Go to Instructions above and read the next step.
If u Like to Help Me :
(Wanna buy sony ericsson x10 mini pro case)...
After root of new firmware use this script to install the following features:
1. Reboot
2. Jit
3. App2sd
u can get this script here. (Thanks to galaningenieros for his awesome work)
Credits:
All credits go to:
zdzihu, for xrecovery and for all this actually, as i followed his method.
Bin4ry for the flasher..
aZuZu for his SIN2IMG tool. Works great!
For Keyboard Problems Go here.
DISCLAIMER: I AM NOT RESPONSIBLE IN ANY WAY, IF YOU BRICK YOUR DEVICE.
USING THIS METHOD AND FILES, IS DONE BY YOUR OWN CHOICE.
Click to expand...
Click to collapse
Hi.... thanks for instructions, but Flasher link is broken...
Another question [ newbiw] - 2.0.2.A.0.24 is FROYO version?
poncespr said:
Anyone else having issues with the gps? I seem to lock on to a signal, but Ndrive keeps telling me I am off any road. It was working great with 1.6. Other than that, this is rock solid
Click to expand...
Click to collapse
Never mind. I accidentally erased some map files.
Duh...
saywot said:
I have two of the Xperia Mini Pro handsets, one is flashed with the u20i firmware ( I should be using u20a) and it works well enough
But flashed the other with the firmware for this country and my carrier(u20a) and the 3G is flakey (probably the carrier) but I can't connect to any Wi-Fi networks.
- Not even the wireless router next to my left elbow, here, on the desk,
Click to expand...
Click to collapse
It's a problem with a corrupted wpa_supplicant.conf file
delete it with root explorer (making a back-up just in case) and re-boot
- wireless comes back ready hot and strong
this might be a good place to start
Thanks to this thread I have had a fully functional u20a Mini Pro for quite a few weeks and we have been getting along quite well and I now want to take the relationship a bit further - to the next level.
That is to say, I want to update the Build Number from 2.0.2.A.0.24 to, oh I dunno, 2.1.1.A.0.6
I haven't been able to get it from SE so I'm hoping that someone here might point me in the right direction.
New U20a Firmware
I also would like a copy of Firmware 2.1.1.A.0.6 for Mini Pro U20a. Is any one able to share a up copy please
Hi, I recently got a x10 mini and in a rush to gain root etc.. I accidently flashed U20i-mini pro update_1.0_2.1.1.C.0.0tft and now can't flash any x10 mini firmwares of which I have tried 3 different tft files and even tried bundle creation under advanced settings in FlashTool_0.2.9.1_ and none of these are working.
I've done a bit of searching and the general consenus seems to be just use SEUS and it will all be o.k but it just says there is no software update for my phone
The other weird thing is that I can seem to be able to flash other mini pro firmwares with no problem which boot up fine but I am unable to use the touchsreen so can't access features such as enabling USB settings and unknown sources
Any help anyone could advise I would be very grateful!
Ok man, dont be afraid, try to do this:
1st - Open PC Companion
2nd - Select Support Zone
3rd - Start Phone Update
4th - Select "repair phone"
5th -follow instructions.
Here is a video I did showing what do to:
http://www.youtube.com/watch?v=NuvzapI0MEw
Thanks for the reply I have tried what you have suggested but it also doesn't work it gives the same result as SEUS and PC Companion that software is up to date and the only option is to exit program?
Sent from my GT-I9100 using XDA Premium App
Bump......
milkybarkid said:
Thanks for the reply I have tried what you have suggested but it also doesn't work it gives the same result as SEUS and PC Companion that software is up to date and the only option is to exit program?
Sent from my GT-I9100 using XDA Premium App
Click to expand...
Click to collapse
This is weird. My SEUS still allows me to install the firmware even if the phone is up to date...
I remember there is a restore button in the program...
You can try that way if you have the recovery installed and you can access to it :
plug in your phone
open pc companion,
access to ClockworkMod (the recevory program on your phone)
go to mount and storage and select mount usb storage
now come back to pc copanion, click on support zone, start phone update, select repair, and wait for 30 minutes.
Unfortunately I didn't get as far as gaining root as I can't use the touchscreen.
I even managed to flash a 1.6 version of the experia mini pro via flashtool but it stills says that my software is up to date and again only option it gives is too exit program??
Just can't really understand why it will flash mini pro firmwares but refuses mini firmwares with Flashing loader. Error.Flashing aborted.
I also notice that the main diffrences between mini pro and min firmwares is the inclusion of dsp1.sin in the mini tft files, could this have something to do with it?
Hi, everyone I just joined this forum. I have X10i with firmware 2.1. While searching the thread i came acrosss terms like root, xrecovery, flashing, MT, generic etc. Can someone help me out what these terms mean. I wanted to upgrade my phone to gingerbread. Previously I am an iphone user So i am total noob to this OS and the phone
Thanks in advance
good get away from iphone
root--same thing as jailbreak
xrecovery-- a badass tool that lets you flash roms onto your phone.
flashing-- umm... it is like installing a modified version of even the legit version on the device
generic-- A product having no brand name or registered trademark
example= for device there is branded or non branded
branded means that a company like ATT or Rogers approves that firmware or OS version. So when you turn your phone on, you will usually see something related to them. like an animation of the att world
generic--- clean install. no company restrictions. just regular
ok links for all that crap above
2.3.3 firmware (does not matter if you download x10a or x10i)
Generic-----
http://forum.xda-developers.com/showthread.php?t=936733
do yourself a favor and read
http://forum.xda-developers.com/showthread.php?t=936733 before and download the program WINDOWS only
Thanks for your help. I am going to upgrade my phone soon so is their any problem in doing so and by the way should i just use the SEUS or flash tool
angel eyes said:
Thanks for your help. I am going to upgrade my phone soon so is their any problem in doing so and by the way should i just use the SEUS or flash tool
Click to expand...
Click to collapse
Either will do.
ok thanks for the advice going for the upgrade now lets hope everything goes smoothly will post the results
Now this is the end result of upgrading my phone I used SEUS to upgrade my X10i the phone went into flash mode and the SEUS detect that new software is available soit downloads it but when it comes to installing it stopped at about 15% and said that updATE cannot continue check battary is fully charged and than again try. As far is i remember phone was fully charged when i put it for update now what should i do. The phone doesnt restarts now and when I power up my phone only th egreen led blinks and it vibrates for split second than nothing I waited for it but the phone is not responding what should i do now
HELP NEEDED
to tell you the truth i dont know what SEUS is
i think it is for drivers or something but you should use PC comapanion for drivers
ok
use flashtool in the first link i gave you and download one of the 2.3.3 files
or use a 2.3.3 rom
and flash the sucker on
it should work
Try flashtool if doesn't work let your phone on charge for 1 hour and take it off try again whit seus should be good to go
Sent from my X10i using xda premium
Thanks for the help guys now i have downlaoded flashtool 0.2.8, 2.9,3.0 i also downloaded the firmware and did all the steps according to the toturiol but that what happens it detect the phone in flash mode the flashing starts but at fato1.sin it gives as error message "error flashing abort". I also tried other firmwares but the same error.
Now guys I think I am great trouble so need help
What to do next
And I used the desktop charger to charge the battery for whole two houra but SEUS gives the same error plus pc companion gives error as well i am stuck
Go to pc application manager, close seus and pc companion. Try flashtool tool once again http://forum.xda-developers.com/showthread.php?t=928343. I hope this work for you.
Sent from my SO-01C using Tapatalk
Ok i will try that one too thanks alot lets see wat happens
ok tried that too nu luck
What should i Do now One thing more i was goignaround the threads looking for solution So in one thread it said that firmware can ber installed through flash tool 0.2.5
I tried that too and amazingly the flashing goes all the way to the end on 0.2.5 in the end i get the msg that flashing complete and remove the phone but when i remove the phone and turn it on it just vibrates and small blip of green flash led than nothing
What could be the problem
1. Download Flashtool from
http://doomlord.sylvester20007.com/x10/x10_gb/FlashTool_0.2.9.1-GBready_root_xRec.exe
2. Download the generic 2.3 ROM of your choice
http://forum.xda-developers.com/showpost.php?p=11038646&postcount=1
Personally I would get the Global version unless you can find your country specific one.
Global version download - http://www.multiupload.com/JEXUAHAZTL
3.
a) connect your phone to your PC, make sure it installs the drivers (if your Sony software is working it is fine)
b) Extract Flashtool into a directory you know
c) Extract the firmware file you downloaded. And move the ftf file into the "firmware" directory of Flashtool
d) Make sure your phone is not connected to the PC and is off.
e) Run Flashtool, click on Flash and select the firmware you have just downloaded.
f) It will give you the same instruction - holding the "back" key, (phone still off) connect it to the PC. If you did this correctly, the light will be green and it will start flashing your phone.
g) After it is completed, reboot your phone once or twice and check that it is working.
4. Installing xrecovery and rooting refer to instructions (you already have all the files from when you download in step 1)
http://forum.xda-developers.com/showthread.php?t=1196808
Let me know when you have completed the steps above.
Thanks for advice downloading it now and going to try and will let now about the results
sasukewa said:
1. Download Flashtool from
http://doomlord.sylvester20007.com/x10/x10_gb/FlashTool_0.2.9.1-GBready_root_xRec.exe
2. Download the generic 2.3 ROM of your choice
http://forum.xda-developers.com/showpost.php?p=11038646&postcount=1
Personally I would get the Global version unless you can find your country specific one.
Global version download - http://www.multiupload.com/JEXUAHAZTL
3.
a) connect your phone to your PC, make sure it installs the drivers (if your Sony software is working it is fine)
b) Extract Flashtool into a directory you know
c) Extract the firmware file you downloaded. And move the ftf file into the "firmware" directory of Flashtool
d) Make sure your phone is not connected to the PC and is off.
e) Run Flashtool, click on Flash and select the firmware you have just downloaded.
f) It will give you the same instruction - holding the "back" key, (phone still off) connect it to the PC. If you did this correctly, the light will be green and it will start flashing your phone.
g) After it is completed, reboot your phone once or twice and check that it is working.
4. Installing xrecovery and rooting refer to instructions (you already have all the files from when you download in step 1)
http://forum.xda-developers.com/showthread.php?t=1196808
Let me know when you have completed the steps above.
Click to expand...
Click to collapse
I have done it as adviced but no luck flashing aborts in the middle and giving error message now wehat should i do
Do you have the new flash tool?
angel eyes said:
I have done it as adviced but no luck flashing aborts in the middle and giving error message now wehat should i do
Click to expand...
Click to collapse
Can u do a screen shot or tell us what the error message is?
Thx.
Dark Nightmare said:
Do you have the new flash tool?
Click to expand...
Click to collapse
I have flash tool 0.2.5,0.2.8,0.2.9,0.3.0
Have tried them all only 0.2.5 goes all the way to the end but when i turn on the phone it only virbrates and green led flashes for sec than nothing
When you reboot is there anything showing on the screen? Sony logo...anything? If yes, wait it can take a long time for a new rom to install. If no, I think you need to revert back to the 2.1 rom, root and install busybox, superuser, and xrecovery. once thats done you can backup your rom and data so you don't get stuck updating or if you have trouble with a custom rom etc. Also I think your battery stats should be wiped using xrecovery, it sounds like SEUS checked this and the file said your battery was too low to continue the update. Here is a good place to start.
http://forum.xda-developers.com/showthread.php?t=928343&highlight=flashtool+for+noobs
Here is a video on youtube that may help too:http://www.youtube.com/watch?v=HmX-IYNYqL8
Hope this helps you, Good Luck.
angel eyes said:
I have flash tool 0.2.5,0.2.8,0.2.9,0.3.0
Have tried them all only 0.2.5 goes all the way to the end but when i turn on the phone it only virbrates and green led flashes for sec than nothing
Click to expand...
Click to collapse
Try taking the battery out and then try flashing again. Which ftf file are you flashing or selecting in the flash program. You need to use at least a 0.2.9 version of the flashtool.... if you use 0.2.5 start with the 2.1.54 ROM first.
hi guys, I am a new user from Italy.
I would like to download and reistall the original firmware (android 2.3.3) on my xperia x10i.
I am sorry but I am not an expert, thus I need a guide to follow step by step (idiot proof ).
Again I am sorry if this thread already exists somewhere but I am not able to find it or to understand that it could be useful for me.
Many thanks
enzmni said:
hi guys, I am a new user from Italy.
I would like to download and reistall the original firmware (android 2.3.3) on my xperia x10i.
I am sorry but I am not an expert, thus I need a guide to follow step by step (idiot proof ).
Again I am sorry if this thread already exists somewhere but I am not able to find it or to understand that it could be useful for me.
Many thanks
Click to expand...
Click to collapse
-Download frameware 2,3,3 (it's in ftf extension,if not so rename it!)
-Download flash tools pc app (Linux, windows) then install
-Put frimware.ftf to frimware folder of flashtools(it installs by default at drive c:/flashtools)
-turn off your phone
-run flashtools then press lightning button, & choose flash-mode
-select the frimware & press next
-you'll be asked to attaching your phone ,so hold back button then pull USB cable in the phone
-flashtools will do the rest of flashing automatically
Then you can turn it on
#drivers should be installed
#wrong frimware = hard brick
(If this is hard you can use pcc to repair & update your phone to the lates frimware)
Sent for xda via tapatalk
# always wear your seat belt as it saved my life yesterday :beer:
enzmni said:
hi guys, I am a new user from Italy.
I would like to download and reistall the original firmware (android 2.3.3) on my xperia x10i.
I am sorry but I am not an expert, thus I need a guide to follow step by step (idiot proof ).
Again I am sorry if this thread already exists somewhere but I am not able to find it or to understand that it could be useful for me.
Many thanks
Click to expand...
Click to collapse
In pc companion when you'll connect your phone it will check for updates and if not available(which probably won't be if you use gb based rom) click repair and then you can follow instructions on pc companion
Sent from my X10i using xda app-developers app
download generic firmware here : forum.xda-developers.com/showpost.php?p=28235376&postcount=2 choose your region then use flashtool, guide here : forum.xda-developers.com/showthread.php?t=928343
enzmni said:
hi guys, I am a new user from Italy.
I would like to download and reistall the original firmware (android 2.3.3) on my xperia x10i.
I am sorry but I am not an expert, thus I need a guide to follow step by step (idiot proof ).
Again I am sorry if this thread already exists somewhere but I am not able to find it or to understand that it could be useful for me.
Many thanks
Click to expand...
Click to collapse
Hi and welcome to xda!
If you wish to revert back to the stock GB firmware this is the easiest way if you to do so:
1. Turn your device off. If you for some reason can't turn your phone off properly then pull the battery out and wait 10 seconds.
2. If you took your battery out then put it back in. Do not turn your phone on and open SEUS (Sony PC Companion) on your PC (you can download it from the Sony website or simply google it).
3. Click on Support Zone > Phone / Tablet Software Update > repair my phone / tablet > follow instructions and connect the phone in flashmode when asked for (it will tell you how to do that).
4. Wait till SEUS does it thing and tells you that everything is successfully done. DO NOT DISCONNECT THE PHONE FROM YOUR PC WHILE MAKING A SOFTWARE REPAIR!
5. You should be able to use your phone with the stock GB ROM installed.
If your XZU freezes / restarts while booting, it's probably soft-bricked (in fact it's almost impossible to hard-brick it). Use this guide for a clean restore:
- internal data will be wiped
- no root required
- no unlocked bootloader required
- Windows is required
Download Flashtool: link to krabappel2548's post
Install Flashtool
Install drivers using the Flashtool-drivers.exe which is located inside the "driver"-folder of the installation path of Flashtool. Include the flashmode, the fastboot and the XZU drivers.
Download or build a full stocked FTF firmware file fitting your model. Choose Method A (fast) or B (recommended):
Method A (fast): Download a complete FTF-file from the XDA forum (for example link for C6833 or link for C6802 or search the forum for a up to date firmware fitting your model). Move the FTF-file to the "firmwares"-folder of the installation path of Flashtool.
- or -
Method B (recommended): Build your own .FTF file with the newest official stocked firmware:
Install Sony PC Companion: link
Do not connect your smartphone to your pc. Start Sony PC Companion, choose "Support Zone", start the software update. Click on repair and accept everything on the following dialogues. Sony PC Companion will start downloadng the newest firmware.
When the download is finished, exit Sony PC Companion. Use the search function of windows to locate a folder named "blob_fs". This is the place where Sony PC Companion dumped the downloaded firmware. You need 4 files named "FILE_XXXXXXXXX", which have different numbers and no filename extension. There are two small files < 1 mb, one medium sized (circa 20 mb) and one big file ( > 700 mb). Ignore the ICON_ files.
Start flashtool.
Choose Tools > SEUS Decrypt. Choose the "blob_fs" folder as source. Convert the 4 files. Wait until the Bundler dialogue pops up. Content everything you just decrypted and fill in the three fields (Device, Branding and Version). Click on "Create". Wait until it's finished. You will find your fresh FTF file in the "firmwares"-folder of the installation path of Flashtool. Leave the file where it is.
Now it's time to flash the FTF on your XZU. Start flashtool if you haven't yet.
Turn off your XZU and wait at least 5 seconds. If you cannot turn off your XZU, hold the power- and volume-up-button at the same time for 3 seconds. Your XZU will vibrate briefly and poweroff. Or push the button inside the Micro SIM card slot: link to Kiwi Tech video. If you choose the last method, don't forget to leave a youtube comment on Kiwi Tech's video declaring war on his overlong intro
Plug in a fitting USB cabel to a USB 2.0 port of your PC. Do not use a USB 3.0 port. Enter Flashmode: Hold down the volume-down-button and connect your XZU to the prepared USB cabel. You can release the button when the LED lights up.
Flashtool will notice your XZU in flashmode (check log). If not, reinstall the drivers using Flashtool-drivers.exe. Inside flashtool, click on the lighting symbol. Choose Flashmode.
Choose a full FTF firmware & click on "Flash". Wait until it's finished.
Your XZU is now unbricked. Have fun
I got my Z1 Ultra today, unlocked bootloader and tried to get root following "[HOW-TO] ROOT 14.1.B.2.257 and poosibly newer Sony Roms"
I screwed it up and the phone boot looped. I now realize flashtool was at fault refusing flashing stuff. I reinstalled it lots and then installed it one more time with version .12
I tried flashing and now it finally flashes the newest firmware!
I guess my phone will be okey now .
--
Yep, phone works.
Thanks for this thread.
If I go with method B how I know that it will download the latest firmware for XZU not for any other sony phone.
moom999 said:
If I go with method B how I know that it will download the latest firmware for XZU not for any other sony phone.
Click to expand...
Click to collapse
After decrypting you will get a elabel .sin-file, which includes information about the firmware version (for example "elabel-C6833-row_201310161732.1_14.1.B.2.257_XXX"). During the repairing process of the Sony Pc Companion a screen will pop up and asks you to choose your smartphone modell. But at that point your download is already finished, which is quiet confusing too me. For me it worked perfectly and the built FTF file got the estimated file size (circa 780 mb). Maybe someone can test method B to the point where you decrypt the files and tell me if he got the fitting elabel.sin?
heartless vegan said:
After decrypting you will get a elabel .sin-file, which includes information about the firmware version (for example "elabel-C6833-row_201310161732.1_14.1.B.2.257_XXX"). During the repairing process of the Sony Pc Companion a screen will pop up and asks you to choose your smartphone modell. But at that point your download is already finished, which is quiet confusing too me. For me it worked perfectly and the built FTF file got the estimated file size (circa 780 mb). Maybe someone can test method B to the point where you decrypt the files and tell me if he got the fitting elabel.sin?
Click to expand...
Click to collapse
So I will know which after it finish downloading. I can’t make it download to exact phone I need FTF.
Thanks for all your help
:good: :good: :good:
This saved my marriage