Important information:
This thread is for LineageOS 16.0 opensource builds for Wingtech WT88047, marketed as Redmi 2 by Xiaomi. The following will not be supported in this thread:
Custom Kernels
Mods
Modified system files
Xposed
Magisk
OMS
What's not working:
VoLTE
Installation:
If you are on the stock OS, you will first need a custom recovery. You can get the recommended TWRP recovery here.
If you are coming from stock or other ROMs, you need to do a factory reset.
As always, make sure to backup before installing this ROM.
For more detailed instructions, please visit:
Install LineageOS on wt88047
Download link:
Google Drive
Recommended Google Apps package:
MindTheGapps
Recommended Firmware:
Google Drive
Changelog:
Changes for wt88047
Bug reports:
How to submit a bug report
Gitlab Issues
Donate to support development:
Donate via PayPal to nicknitewolf
Donate via PayPal to LineageOS
Source Code:
Device tree
Kernel
Contributors
@nicknitewolf , GuaiYiHu , @mikeNG . @jrior001
Source Code: https://github.com/LineageOS
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.10.x
ROM Firmware Required: M8936FAAAANUZM-1.33887.1.41528.1
Based On: LineageOS
Reserved
Nice thread banner!
thanks a lot, nick :good:
Thank you very much!
mikeioannina said:
Nice thread banner!
Click to expand...
Click to collapse
( ͡° ͜ʖ ͡°)
works great on 1 GB version, hopefully will get official build too
thank you so much
running well on redmi 2 prime without GAPPS
Screenshots
Cannot install Gapps.. it says error 70
-----------------
Edited : Now i can install Gapps after repartition system to 2gb using this tutorial
https://forum.xda-developers.com/redmi-2/themes/twrp-resize-partition-easily-t3803042
Thankyou so much!!!
ovinitas said:
Cannot install Gapps.. it says error 70
Click to expand...
Click to collapse
Which gapps?
nadimhd said:
Which gapps?
Click to expand...
Click to collapse
OpenGapps.. But I already fix it.. with this tutorial..
https://forum.xda-developers.com/redmi-2/themes/twrp-resize-partition-easily-t3803042
I only need to re-partition system to 2gb
And everything run flawlessly... :laugh::good::fingers-crossed:
nadimhd said:
Screenshots
Click to expand...
Click to collapse
How to get onscreen buttons
dabakale said:
How to get onscreen buttons
Click to expand...
Click to collapse
By editing build.prop
---------- Post added at 04:28 PM ---------- Previous post was at 04:26 PM ----------
ovinitas said:
OpenGapps.. But I already fix it.. with this tutorial..
https://forum.xda-developers.com/redmi-2/themes/twrp-resize-partition-easily-t3803042
I only need to re-partition system to 2gb
And everything run flawlessly... :laugh::good::fingers-crossed:
Click to expand...
Click to collapse
No repartition required if you flashed the recommended gapps.
nadimhd said:
By editing build.prop
---------- Post added at 04:28 PM ---------- Previous post was at 04:26 PM ----------
No repartition required if you flashed the recommended gapps.
Click to expand...
Click to collapse
Nah..... I am still getting error 70 with MindTheGapps / Recomended Gapps
But anyway.. this Rom is Amazing and so much better
compared to Lineage OS official 15 ..
So why is this not official though?
ovinitas said:
Nah..... I am still getting error 70 with MindTheGapps / Recomended Gapps
But anyway.. this Rom is Amazing and so much better
compared to Lineage OS official 15 ..
So why is this not official though?
Click to expand...
Click to collapse
Will be official soon maybe
Pixel launcher keep force closed, i'm using opengapps(aroma) i did exclude pixel icons cause it says 7.1 only but i do remember including it when i flash oreo rom and nothing happen. But its still force closed with or without pixel icons. Good things trebuchet didn't unisntalled automatically. I'll try redownload the gapps and see if its happen again, or maybe try different gapps variant.
recovery link error 404 @nicknitewolf
Update 24/06/19
- Remove excessive logging which may have caused battery drain
- System profiles should be working properly again
https://drive.google.com/uc?id=1FFJRXjZU5QcYqCR7FPlZDBQ-yuU0cGyl&export=download
nicknitewolf said:
Update 24/06/19
- Remove excessive logging which may have caused battery drain
- System profiles should be working properly again
https://drive.google.com/uc?id=1FFJRXjZU5QcYqCR7FPlZDBQ-yuU0cGyl&export=download
Click to expand...
Click to collapse
When I am installing Your ROMS..
I always havin error : 7 on TWRP..
And must Edit META-INF -> COM -> Google -> Android -> updater-script
And erase All Phone Model On it.. so i can install your roms..
Can you fix this?? So I Can update this phone easily
And One more thing..
Wi-Fi working but really2 slow.. compared to Previous Lineage OS..
There is no bug so far.. just Wi-Fi is Slow..
on Lineage OS i can get 20mbps but on this Rom.. only 4-8mbps with really really high ping time.
Related
I built AOSP 5.0 Release 2 (a.k.a. Lollipop) for Nexus 5. This is PURE AOSP Lollipop. Enjoy. Also always remember I'm not responsible for anything. ROM is tested. Kernel is stock prebuilt AOSP kernel.
Download:
https://www.androidfilehost.com/?fid=95784891001606871
Installation:
1) Wipe all the partitions except Internal Storage.
2) Flash ROM.
3) Flash Gapps (You can find gapps packages for Lollipop/L-preview at XDA.)
4) Enjoy
Source:
ROM: https://android.googlesource.com
Vendor Tree: https://github.com/yashade2001/nexus-lollipop-preview-vendor.git
Kernel (Prebuilt): https://android.googlesource.com/device/lge/hammerhead-kernel/+/lollipop-release
Device Tree: https://android.googlesource.com/device/lge/hammerhead/+/lollipop-release
For manifest, I used "android-5.0.0_r2" branch.
Thanks! Been playing around with the first preview. I think it's time to move on to something more recent.
Since this is source build, do we need to flash Gapps separately? If yes, any link for material gapps?
EDIT: Sorry, some info in OP.
Thanks yashade
good work mate, downloading it now
---------- Post added at 06:31 PM ---------- Previous post was at 06:21 PM ----------
neobuddy89 said:
Since this is source build, do we need to flash Gapps separately? If yes, any link for material gapps?
EDIT: Sorry, some info in OP.
Click to expand...
Click to collapse
i found this in a nather thread
https://www.androidfilehost.com/?fid=95784891001606650
Are they still sticking with the 3.4 kernel for the Nexus 5, despite the Nexus 6 and 9 both having the much more recent 3.10 kernel?
@Rolle90, @neobuddy89, That gapps force closes on psychos build. He is redoing some stuff now. He got his from next door in illusion thread. Might want to look around first
Does tethering work in this latest build?
thanks, but this is not an original rom, and does not go into the n5 original development threads. it goes to the android development section, since you did not make up android 5.0.
nh1402 said:
Are they still sticking with the 3.4 kernel for the Nexus 5, despite the Nexus 6 and 9 both having the much more recent 3.10 kernel?
Click to expand...
Click to collapse
Unfortunately, YES.
Old PM structure. Old mem structure. No CPU boost. No much cream layer of audio. Just imp fixes and minor features on top of kk 3.4 kernel.
---------- Post added at 12:32 AM ---------- Previous post was at 12:32 AM ----------
razrlover said:
@Rolle90, @neobuddy89, That gapps force closes on psychos build. He is redoing some stuff now. He got his from next door in illusion thread. Might want to look around first
Click to expand...
Click to collapse
Anyone ... anything on confirmed working gapps for L?
Your Build with this Gapps https://docs.google.com/file/d/0B2KoxninDIpNTjJ6YXhSSTRTN0U/edit?usp=docslist_api
work for me , contacts sync
so is this the final 5.0 build or no?
Tylog said:
Your Build with this Gapps https://docs.google.com/file/d/0B2KoxninDIpNTjJ6YXhSSTRTN0U/edit?usp=docslist_api
work for me , contacts synch.
Click to expand...
Click to collapse
How's the performance compared to dev preview?Is this faster?tnx
Dajinn said:
so is this the final 5.0 build or no?
Click to expand...
Click to collapse
Kind of, it's the base they're going to use for the release version. It doesn't have gapps and little things.
where can I download the gapps ?
_Magic said:
where can I download the gapps ?
Click to expand...
Click to collapse
Man it is literally first post of this page-
http://forum.xda-developers.com/showpost.php?p=56526805&postcount=11
gaurav2009 said:
Man it is literally first post of this page-
http://forum.xda-developers.com/showpost.php?p=56526805&postcount=11
Click to expand...
Click to collapse
oh sorry
I hadn't seen that post but thank you so much for your answer
Thank you for this! Anyone got this running using MultiROM?
Whats vendor and device tree
another question before install:
Which languages are available ?
DISCLAIMER:
Code:
* I hereby am not responsible for any damage
* you cause to your device or any bricks/bootloops
* that are caused by flashing this ROM to your
* device. Flashing was your choice, not mine, so
* any radiation leaks caused by flashing this ROM
* are hereby your responsibility.
This ROM is for Xperia SP(huashan) Unlocked.
How to Install:
1.) Download the ROM zip and (optionally) the GAPPS zip and move them to your device via USB, FTP, ADB, whatever.
2.) (Re)Boot into recovery. Make a backup of your current setup (just in case), and wipe.
3.) Install BlissPop and GAPPS, and reboot.
4.) Enjoy! Screenshots will attach "Screenshots" tab.
Downloads:
BlissPop-v4.0.3-huashan-UNOFFICIAL-20151212-1714.zip
OpenGapps - Select Gapps size Yourself
Changelog/Known Issues:
12/12/15:
--Initial Release
--Use BlissPop 4.0.3 Source
--I didn't find Issues.If you find Issues,Please tell ME.
XDA:DevDB Information
[Unofficial]BlissPop - 5.1.1, ROM for the Sony Xperia SP
Contributors
otofune
Source Code: https://github.com/BOSP-LP
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod
Version Information
Status: Nightly
Created 2015-12-12
Last Updated 2015-12-12
3.) Install Resurrection Remix and GAPPS, and reboot.
it should be bliss not RR
are u using @Adrian DC kernel or what ?
ok i think u use cm official sources for our device and those are not that much good ...u maybe want to check adrian github for more info
flash- said:
3.) Install Resurrection Remix and GAPPS, and reboot.
it should be bliss not RR
are u using @Adrian DC kernel or what ?
ok i think u use cm official sources for our device and those are not that much good ...u maybe want to check adrian github for more info
Click to expand...
Click to collapse
Yep, you should use Adrian DC sources. Kernel and device.
---------- Post added at 02:00 PM ---------- Previous post was at 01:54 PM ----------
Anyway testing it
Sent from my GT-I9300 using Tapatalk
flash- said:
3.) Install Resurrection Remix and GAPPS, and reboot.
it should be bliss not RR
are u using @Adrian DC kernel or what ?
ok i think u use cm official sources for our device and those are not that much good ...u maybe want to check adrian github for more info
Click to expand...
Click to collapse
Thanks,fix mistake.
so,i use CM official Kernel and Device Source...
@otofune
Here are some screenshots. Use it if you want:
https://drive.google.com/folder/d/0B31swrpwB9_3aVFlVU1kcmJkeEU/edit
High touch sensitive doesn't work.
Sent from my GT-I9300 using Tapatalk
tried to enable high touch sensivity,setting FC everytime
darjwx said:
@otofune
Here are some screenshots. Use it if you want:
https://drive.google.com/folder/d/0B31swrpwB9_3aVFlVU1kcmJkeEU/edit
High touch sensitive doesn't work.
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
From the screenshots I see a new camera app Which one is it?
Can someone plz upload its apk:laugh:
Phoenix854 said:
From the screenshots I see a new camera app Which one is it?
Can someone plz upload its apk[emoji23]
Click to expand...
Click to collapse
Sorry I'm not now on blisspop and I don't know the name. Maybe is next camera and there is a thread of it in xda.
Buggy camera app...freezes after taking pictures. Works normally if you exit and open the app. Also, touch focus is not working, i like this cause you can use the shutter button to focus just like cybershot. Hope the bugs are fixed or any workaround for this?
Sent from my Xperia SP using Tapatalk
otofune said:
Thanks,fix mistake.
so,i use CM official Kernel and Device Source...
Click to expand...
Click to collapse
use adrian dc kernel and device sources ...cm are good but lot of thing/fixes not merged yet ...so that will make the ROM not as much as good as other ROMs that uses adrian dc sources
My review:Used this rom for 8 days..
Everything is ok except i faced 2 problem.\
1.sudden roobot while using facbook or playing game
2.took 3.30-4 hours to fully charge
@otofune , Any news on what's next ?
Hi
After LeMax2 Project Treble port, I decide to bring up to our device too. Since I've x720 6/64 variant this project was possible to me tho due to QFIL tool in case of bricks, but wasn't need thanks for god.
Project Treble as Work in progress, please read the OP before flash/bla.
and let's the party begin. check sreenshots in "Screenshots" or in the second post.
READ ME FIRST:
it's a buggy rom: I don't care about that, since I put [WIP] that mean new fixes will coming up.
Respect works of devs because they spend time and energy to do these things.
I did not tolerate ETA.
Compatible Devices:
x720: yes.
x722: yes.
x727: yes.
How is possible:
click here.
How I done:
Porting patches of TWRP to our one that I will release one for us too.
Applying the kernel patch from LeMax2 one to mount vendor on ZL1.
Compile the whole rom with Project Treble flags in device tree and proprietary blobs.
Works
Audio.
ADB.
Bluetooth.
Camera.
Display.
Fingerprint.
Graphics: hwcomposer & gralloc.
Internal Storages.
Hardware navigation buttons.
LeEco Extras.
Lights.
NFC.
RIL
Sensors.
USSD Codes: seems works
Wifi.
Bugs
Tell us more, all credits goes to codeworkx fir his fixes and works .
Installation Guide:
Copy my unofficial los to internal storage
Download my own TWRP and flash it via fastboot.
Download the partition.zip from linked thread. credits: @shivatejapeddi
Flash the whole partition.zip (don't panic if give the error it's ordinary administration.)
Go back to Wipe->uncheck all partition except the vendor, tap swipe to wipe it then.
Optional: you can go to Mount to see if mounted.
Wipe: dalvik, cache, data and system.
Now flash the whole rom that will install the vendor.img automatically, reboot device once finish installing then.
Enjoy Project Treble.
TWRP
Click here.
Credits:
LePro3 Developers.
LeMax2 Developers, without them wasn't possible for the unsed partition.
Sources:
https://github.com/hak86
XDA:DevDB Information
Treble x72x, ROM for the LeEco Le Pro3
Contributors
haky 86
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.18.x
ROM Firmware Required: EUI 20s or Newer
Based On: LineageOS
Version Information
Status: Testing
Stable Release Date: 2018-07-25
Beta Release Date: 2018-07-25
Created 2018-07-25
Last Updated 2018-07-24
** Note **
reservedddddddddddddddddddddddddddddddddddddddddddddddddddd
** Note **
Can I flash GSI by Phhusso:
I didn't try it yet, our device is ARM64 System A.
How to Flash GSI:
Download your favorite GSI rom.
Flash via TWRP or fastboot. BUT please keep attention to not wipe vendor or will not get booted, you are allowed to update vendor partition only if I release new build with fix things.
How Can I flash Android P Developer Preview 5:
Click on the following link.
Download ARM64 System A image. and 3 zips for post GSI.
Flash the system.img of Android via fastboot (recommend).
Reboot to TWRP.
Go to Mount-> check Vendor partition.
Flash the 3 zip as they arranged (1-2-3),
Reboot, enjoy Android P DP5.
NOTE:
This project has nothing to do with official updates, I did Project Treble by my initiative that will not affect with official roms. Might someone will reconsider supporting Treble even with official update tho?
Damn Congratulations!
I can't do it today. But, I will definitely try it this weekend. Thanks for sharing these test builds. I am definitely looking forward to checking it out!
Thanks again!
I will go ahead and download it and get started ASAP.
---------- Post added at 08:48 PM ---------- Previous post was at 08:41 PM ----------
haky 86 said:
Can I flash GSI by Phhusso:
I didn't try it yet, our device is ARM64 System A.
How to Flash GSI:
Download your favorite GSI rom.
Flash via TWRP or fastboot. BUT please keep attention to not wipe vendor or will not get booted, you are allowed to update vendor partition only if I release new build with fix things.
Click to expand...
Click to collapse
I just want to say again, that you are awesome for doing this, I didn't think it was possible with this phone. I am blown away! Nice job!
Hmmm can I shirk off my plans and install this right now? lol!
---------- Post added at 09:07 PM ---------- Previous post was at 08:49 PM ----------
I have a question about Gapps, Magisk and firmware.
I assume Firmware is not an issue since it would still get flashed to the correct partition. With Magisk, I assume that you would prefer that we use 16.7?
What should we use for Gapps? Do you have a specific Gapps in mind?
Wonderful Work~
Its a great! Wonderful work, now wait to fix all bugs now.
I have a doubt. Is the known bug caused by the PT partition? If flash Android P, will those bug still exist?
what should i say , it is great job !!!!!
haky 86 said:
reservedddddddddddddddddddddddddddddddddddddddddddddddddddd
Click to expand...
Click to collapse
Hi bro all fixes are completely done ,just use my trees here ,github.com/chityanj , recommend not to make changes to common tree, use as it is, where as for zl1 try make changes as per my x2 tree, yeah cam requires a blob edit in vendor, I can help u that
Any info about IR support and NFC Smartcard Service?
Most hyped project for now, congratulation. Peoples don't even woke up and already you haven't 2 pages of comments and 15 likes. Congratulation! If everything will be good I'll buy you a beer
Crystal-L said:
I have a doubt. Is the known bug caused by the PT partition? If flash Android P, will those bug still exist?
Click to expand...
Click to collapse
let me fix all those bugs and I can port the rom you want then.
shivatejapeddi said:
Hi bro all fixes are completely done ,just use my trees here ,github.com/chityanj , recommend not to make changes to common tree, use as it is, where as for zl1 try make changes as per my x2 tree, yeah cam requires a blob edit in vendor, I can help u that
Click to expand...
Click to collapse
congrats for fixes, hmm I will give a look right now. :good:
edit: what about the error in domain.te in system/sepolicy? I had to remove coredomain to let compiling go.
qqzwc said:
Any info about IR support and NFC Smartcard Service?
Click to expand...
Click to collapse
NFC already fixed just check "Works"
D1stRU3T0R said:
Most hyped project for now, congratulation.... If everything will be good I'll buy you a beer
Click to expand...
Click to collapse
O...M...G....! I see the bricking season has begun, already in summer?
Role reversal: if it (Oreo) [almost] works ......f**k with it!:good:
Good luck!
xen2001 said:
O...M...G....! I see the bricking season has begun, already in summer?
Role reversal: if it (Oreo) [almost] works ......f**k with it!:good:
Good luck!
Click to expand...
Click to collapse
) hopefully will work on x722, bcs always there is the problem.
haky 86 said:
let me fix all those bugs and I can port the rom you want then.
congrats for fixes, hmm I will give a look right now. :good:
edit: what about the error in domain.te in system/sepolicy? I had to remove coredomain to let compiling go.
NFC already fixed just check "Works"
Click to expand...
Click to collapse
Can you answer the question about Gapps?
Is a version of Gapps available for this yet?
haky 86 said:
let me fix all those bugs and I can port the rom you want then.
congrats for fixes, hmm I will give a look right now. :good:
edit: what about the error in domain.te in system/sepolicy? I had to remove coredomain to let compiling go.
NFC already fixed just check "Works"
Click to expand...
Click to collapse
hi be on permissve for now some sepolicy need to be rewritten and nuke that causes compliation issues
shivatejapeddi said:
hi be on permissve for now some sepolicy need to be rewritten and nuke that causes compliation issues
Click to expand...
Click to collapse
alright, I also forget to edit the mk files like Android.mk in the proprietary blobs probably that's why buggy.. I'll post new screenshots once got fixed :angel:
Damn, I sell my device.
Thank you for your support.
lazye53 said:
Damn, I sell my device.
Thank you for your support.
Click to expand...
Click to collapse
too late <3
well let's give this a go on x722 and see what happens .. Thanks for the hard work, it's highly appreciated !
Stolen from @insomnixXx: (Sorry buddy, I'm a bit lazy ) I AM NOT THE DEVELOPER OF THIS ROM NOR A MEMBER OF MOKEE TEAM!!!
The purpose of this thread is to "spread the word" for this ROM so many more users can try it and also that they know this option exists too.I am not responsible for any damage you may deal to your device since this is just an "repost" of the ROM.If you don't know what you are doing then better don't do it. Or just follow the instructions lol
For bug reports please contact the MoKee team because it is useless, since nearly all MoKee Dev's are chinese and active on MoKee forum
I will DON'T update the thread or write a personal feedback after every rom update. Their changelog is accessable for everyone, please feel free to read that .
About
MoKee Open Source is based on the Google AOSP. We update our source code frequently to keep up with the latest development, and not forgetting to merge in special features of our own at the same time.
A small group of people from around the world who are interested in Android launched this project on the 12th of December 2012, and is committed to make this ROM better and better. Like most contributors of open source projects (Omni, CyanogenMod, Slim AOSPA etc), we are doing all these in our free time as our passion…
Since this project is open source, anyone interested can participate in the development (maintain new devices, contribute code etc). Newcomers are always welcomed!
ALL CREDITS TO MOKEE TEAM
Instructions:
Do a nandroid backup via TWRP (link below) (safety first)
Wipe Dalvik, Cache, System, Data via TWRP
Install MoKee ROM and GApps
If you want root, install Magisk for example...
Reboot into system (first boot will take ~5 minutes!)
ENJOY
Downloads:
Download ROM: https://download.mokeedev.com/?device=zl1
Download GApps: https://opengapps.org
Download newest TWRP (important because of Vendor partition!): https://twrp.me/leeco/leecolepro3.html
Download Magisk: https://github.com/topjohnwu/Magisk/releases
Hit the thanks button if you like this post or comment if you don't. Any feedback is appreciated much .
Any experience?
drdagi said:
Any experience?
Click to expand...
Click to collapse
It's a very stable ROM but there is not extra functions like others rom.
May be in another version.
drdagi said:
Any experience?
Click to expand...
Click to collapse
Excellent battery life (drained only 4-5% while recover 102 apps via Titanium Backup, normal drain is 10% for me), but its like a Pixel ROM ( @Lethalben already said it);
There are no features, just a clean rom.
drdagi said:
Any experience?
Click to expand...
Click to collapse
很稳定。每天更新。在
faraway59651634 said:
很稳定。每天更新。在
Click to expand...
Click to collapse
Please write in english or use google translator
Excellent work
Everything works like a thousand wondersthe, battery seems to hold much more, My phone now is like it's from another planet much faster. My phone is: X722, Very important is to install twrp-3.2.3-1-zl1.img
or higher but no ( zl0 ), must be (zl1) .
IR included?
Sony make.belive said:
Please write in english or use google translator
Click to expand...
Click to collapse
ok
slawektj said:
Everything works like a thousand wondersthe, battery seems to hold much more, My phone now is like it's from another planet much faster. My phone is: X722, Very important is to install twrp-3.2.3-1-zl1.img
or higher but no ( zl0 ), must be (zl1) .
Click to expand...
Click to collapse
i have x722 i use twrp 3.2.3-1 zI0, without problems, i use zI1 ???
panos196 said:
i have x722 i use twrp 3.2.3-1 zI0, without problems, i use zI1 ???
Click to expand...
Click to collapse
For my X722 it worked me flash this TWRD (twrp-3.2.3-1-zl1.img) and I have not had any problems, but with this TWRD (twrp-3.2.3-1-zl0.img) I could not install the rom.
Awesome rom, smoother experience, greater battery experience.
Missing: IR remote app, play store IR apps support and need little more customization.
Thanks a million for this rom.
---------- Post added at 09:00 PM ---------- Previous post was at 08:55 PM ----------
TechDriver said:
IR included?
Click to expand...
Click to collapse
Not yet,
Did they include IR in the oreo version?
wilq5 said:
Did they include IR in the oreo version?
Click to expand...
Click to collapse
May be in future.
I have been using this rom since 5 days I didn't face any issue. Lock unlock is smooth without any issue.
Only need IR support and some additional features.
Great rom.
Any one know, for Incremental update which recovery need to be installed?
bppjenil said:
Any one know, for Incremental update which recovery need to be installed?
Click to expand...
Click to collapse
TWRP is necessary. But for incremental updates you need to donate a minimum of 5$ to them.
This is an one-and-only activation cost.
Otherwise you need to flash the whole rom for an update
Sony make.belive said:
TWRP is necessary. But for incremental updates you need to donate a minimum of 5$ to them.
This is an one-and-only activation cost.
Otherwise you need to flash the whole rom for an update
Click to expand...
Click to collapse
Thank you,
I paid and I'm on Incremental update, but aftrer install goes to recovery and doesn't reboot. Force to reboot but does not reboot.
But if i download full rom, after apply udate automatically reboot and works.
Any suggestions?
This rom doesn't give issues yet. Smooth.
Missing of IR remote.
bppjenil said:
Thank you,
I paid and I'm on Incremental update, but aftrer install goes to recovery and doesn't reboot. Force to reboot but does not reboot.
But if i download full rom, after apply udate automatically reboot and works.
Any suggestions?
This rom doesn't give issues yet. Smooth.
Missing of IR remote.
Click to expand...
Click to collapse
Maybe it wont work because its a nightly rom.. Please read the full description on their home page, what difference there are for editions
Great work but i have a few bugs:
- I use two sim card and when i setup data on second it keep reverting on first (after reboot or similar).
- On bank app when unlock with FP i get "Token is not unlocked"
This bugs was ok on old android 8 Mokee - phone is X722.
maybe someone knows why all on lineage based and aosp based roms that i install on ZL1 i have wrong battery information? i mean - it can show 20% and then i restart and it shows 70%, and then i restart again and it shows 30%.
it happens on all roms i tried of oreo and pie (lineage, mokee, RR, AEX), and only on zl1 (x720). when i install the same rom on zl0 (x722) i don't have this problem. when i install custom EUI rom i also don't have this problem, but then when i install lineage/mokee/RR again i have this problem again.
---------- Post added at 03:43 PM ---------- Previous post was at 03:16 PM ----------
maybe someone knows why all on lineage based and aosp based roms that i install on ZL1 i have wrong battery information? i mean - it can show 20% and then i restart and it shows 70%, and then i restart again and it shows 30%.
it happens on all roms i tried of oreo and pie (lineage, mokee, RR, AEX), and only on zl1 (x720). when i install the same rom on zl0 (x722) i don't have this problem. when i install custom EUI rom i also don't have this problem, but then when i install lineage/mokee/RR again i have this problem again.
Original Tread: https://forum.xda-developers.com/ga...-0r40-crdroid-5-5-galaxy-j5-variants-t3939400
CrDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today. We're mainly based on LineageOS so use custom kernels compatible with them! *Not responsible for any damage caused to your device*
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
What's working :
RIL (in-call audio, messaging, data possibly)
Bluetooth (including audio)
WiFi
Audio (music, etc)
Camera (including video recording)
Flash
Sensors
GPS
Known issues:
NFC doesn't work
VoLTE
SE Linux is permissive
The charging info in the lock screen always shows 0m
FOLLOW INSTRUCTIONS CAREFULLY OTHERWISE YOU WILL GET ERROR :
Reboot to recovery (Use TWRP 3.2 which you can find here https://forum.xda-developers.com/gal...erino-t3768707 TWRP 3.3 has flash problems with the camera fix)
Wipe cache, dalvik cache, data (If you have done format instead of wipe reboot the recovery once else it will end up with issues/errors)
Flash ROM
Flash Camera fix
Flash Open Gapps (ARM - NANO (my recommendation) - 9.0)
Done- Reboot Now
Enjoy the clean ROM
Downloads:
ROM: https://mega.nz/?fbclid=IwAR3jt5Rnt...I!kuWHwPudC5TnTxaG5WWKZsS3w37TsxFhWO92p3f2JlA (PC downloadable through browser, for Android users, just install the app and it will let you download the file without an account)
Camera Fix: https://mega.nz/#!Os8XFI6a!qXQthCUQ-8sClQ4n3DoyrShojrojZkQ1NLew9Mu8H0c (remember, downgrade to TWRP 3.2)
Radio Fix (flash only if needed, I didn't test radio): https://mega.nz/#!7ptjBKia!PHtHyAfY_b5qWYG4UP6TJPHm4ielDzfp693lQprEe6M
GAPPS:
https://opengapps.org
CREDITS/THANKS TO... @vince2678, @minz1 and of course all other Galaxy-MSM8916 devs and contributors @jenslody for the Home button Wake-up fix @Zakaryan2004 @karthick mostwanted @latvianguy18
- ResurrectionRemix
- Google
- LineageOS
- SlimRoms
- AOSPA (Paranoid Android)
- OmniRom
- NamelessROM
- Many others... (if you're feeling upset being out of the thanks list just send a PM )
Special Thanks to:
@Francisco Funes
@latvianguy18 (Original j5 2015 ROM developer)
@bluedogerino
@Exodusnick for kernel
ROM information:
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Marshmallow Bootloader / 3.2 TWRP
Based On: LineageOS
I have to admit this thread is much better than mine, congratulations!
Sent from my kylessopen using XDA Labs
Francisco Funes said:
I have to admit this thread is much better than mine, congratulations!
Click to expand...
Click to collapse
Thank you, it's all due to you!
NecromancerViper said:
Original Tread: https://forum.xda-developers.com/ga...-0r40-crdroid-5-5-galaxy-j5-variants-t3939400
CrDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today. We're mainly based on LineageOS so use custom kernels compatible with them! *Not responsible for any damage caused to your device*
What's working :
RIL (in-call audio, messaging, data possibly)
Bluetooth (including audio)
WiFi
Audio (music, etc)
Camera (including video recording)
Flash
Sensors
GPS
Known issues:
NFC doesn't work
VoLTE
SE Linux is permissive
The charging info in the lock screen always shows 0m
FOLLOW INSTRUCTIONS CAREFULLY OTHERWISE YOU WILL GET ERROR :
Reboot to recovery (Use TWRP 3.2 which you can find here https://forum.xda-developers.com/gal...erino-t3768707 TWRP 3.3 has flash problems with the camera fix)
Wipe cache, dalvik cache, data (If you have done format instead of wipe reboot the recovery once else it will end up with issues/errors)
Flash ROM
Flash Camera fix
Flash Open Gapps (ARM - NANO (my recommendation) - 9.0)
Done- Reboot Now
Enjoy the clean ROM
Downloads:
ROM: https://mega.nz/?fbclid=IwAR3jt5Rnt...I!kuWHwPudC5TnTxaG5WWKZsS3w37TsxFhWO92p3f2JlA (PC downloadable through browser, for Android users, just install the app and it will let you download the file without an account)
Camera Fix: https://drive.google.com/file/d/1eB0...pY9SWgUpx/view (remember, downgrade to TWRP 3.2)
Radio Fix (flash only if needed, I didn't test radio): https://drive.google.com/file/d/12Bz...w?usp=drivesdk
GAPPS:
https://opengapps.org
CREDITS/THANKS TO... @vince2678, @minz1 and of course all other Galaxy-MSM8916 devs and contributors @jenslody for the Home button Wake-up fix @[email protected] [email protected]
- ResurrectionRemix
- Google
- LineageOS
- SlimRoms
- AOSPA (Paranoid Android)
- OmniRom
- NamelessROM
- Many others... (if you're feeling upset being out of the thanks list just send a PM )
Special Thanks to:
@Francisco Funes
@latvianguy18 (Original j5 2015 ROM developer)
@bluedogerino
@Exodusnick for kernel
ROM information:
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Marshmallow Bootloader / 3.2 TWRP
Based On: LineageOS
Click to expand...
Click to collapse
If you are experienceing random Android reboots, try disabling AOD and wipe cache, Ambient Display seems a pain...
NecromancerViper said:
If you are experienceing random Android reboots, try disabling AOD and wipe cache, Ambient Display seems a pain...
Click to expand...
Click to collapse
Actually random reboots on pie are caused by "show taps" option on developer options
Sent from my j5xnlte using XDA Labs
Francisco Funes said:
Actually random reboots on pie are caused by "show taps" option on developer options
Click to expand...
Click to collapse
I tried porting Lineage 16.0 GO from J5 2015 but the server was down...
can someone share screenshots of what it looks like in terms of customization please
KRou705 said:
can someone share screenshots of what it looks like in terms of customization please
Click to expand...
Click to collapse
Screenshots are on the original thread.
I'd like to inform you that the camera fix download page ends with an error.
BlackAxiom said:
I'd like to inform you that the camera fix download page ends with an error.
Click to expand...
Click to collapse
https://drive.google.com/file/d/1eB0WMgiBCL9pyyV0dUfFu2fpY9SWgUpx/view
Sent from my kylessopen using XDA Labs
BlackAxiom said:
I'd like to inform you that the camera fix download page ends with an error.
Click to expand...
Click to collapse
Sorry for the unconvinced, fixes migrated to MEGA instead of google drive, thanks for using my Port!
Im going to switch from ViperOS (since its outdated) to CrDroid today - i hope it will meet my expectations! Great many thanks for this rom, Necro!
---------- Post added at 09:56 AM ---------- Previous post was at 09:45 AM ----------
Isn't it possible to use encryption?
z-phoria said:
Im going to switch from ViperOS (since its outdated) to CrDroid today - i hope it will meet my expectations! Great many thanks for this rom, Necro!
---------- Post added at 09:56 AM ---------- Previous post was at 09:45 AM ----------
Isn't it possible to use encryption?
Click to expand...
Click to collapse
I do not know, I don't use encryption...
@NecromancerViper Okay...Well, im in need of encryption.
Could anyone take a looksie on that, because on Samsung Galaxy J5 2016 (FN) it gets to show the android-bot for a few secs before bugging out closing without any box'es showing, then reverting back to screenlock? Or if i can take any step to fix this myself with any patch or so? All tips & tricks are appreciated here!
Also camera is not working - can any patch available be applied to fix it on this ROM?
Great many thanks yet again @NecromancerViper!
z-phoria said:
@NecromancerViper Okay...Well, im in need of encryption.
Could anyone take a looksie on that, because on Samsung Galaxy J5 2016 (FN) it gets to show the android-bot for a few secs before bugging out closing without any box'es showing, then reverting back to screenlock? Or if i can take any step to fix this myself with any patch or so? All tips & tricks are appreciated here!
Also camera is not working - can any patch available be applied to fix it on this ROM?
Great many thanks yet again @NecromancerViper!
Click to expand...
Click to collapse
There is a camera fix on the thread, ambient display is broken and give random soft restarts, both ambient and Always on Display break the ROM, everything else works fine on my side
NecromancerViper said:
There is a camera fix on the thread, ambient display is broken and give random soft restarts, both ambient and Always on Display break the ROM, everything else works fine on my side
Click to expand...
Click to collapse
I tried applying it - but i don't know if i got the right one. ( https://drive.google.com/file/d/1eB0WMgiBCL9pyyV0dUfFu2fpY9SWgUpx/view is the one i downloaded )
Could you please point me to the right one? The one i got i non-working.
Best regards
z-phoria said:
I tried applying it - but i don't know if i got the right one. ( https://drive.google.com/file/d/1eB0WMgiBCL9pyyV0dUfFu2fpY9SWgUpx/view is the one i downloaded )
Could you please point me to the right one? The one i got i non-working.
Best regards
Click to expand...
Click to collapse
This should have been working, did you downgrade to TWRP 3.2?
Im running 3.0.3-0 TWRP. Should i upgrade to 3.2?
NecromancerViper said:
This should have been working, did you downgrade to TWRP 3.2?
Click to expand...
Click to collapse
z-phoria said:
Im running 3.0.3-0 TWRP. Should i upgrade to 3.2?
Click to expand...
Click to collapse
Yes of course, how did you even flashed the ROM with TWRP 3.0? The link to the 3.2 version is on my thread
NecromancerViper said:
Yes of course, how did you even flashed the ROM with TWRP 3.0? The link to the 3.2 version is on my thread
Click to expand...
Click to collapse
The link is 404. Think it will work with https://forum.xda-developers.com/ga...nt/recovery-twrp-3-1-2-blue-dogerino-t3768707 <- that one?
Thanks for helping out!
Best regards :good: