Hi to all! I send this because i have a problem with my Infinix Zero 5.
PROBLEM: After a bad update my device was bootlooped so i downloaded the firmware from Infinix Oficial Site and proceed to flash the ROM with SP Flash Tools he problem was in middle of process when a error appears and the program crashed.
After that I restarted SP Flash Tools and proceed to try again to flash but an error appeared “ STATUS_INVALID_GPT (0xC0030008)” i tried several times but the same error appears, tried with Firmware Update “PMT Error appears” so my device was hard bricked and i can´t use again, my PC doesn,t detect now, only charge (the red light appears) and is all. No screen, PC Detection is fast because after a second the USB disconnect sound appears
if you know who to fix this please help me, im desesperated.
Thanks for all.
ps. i put a link to a video below, recorded by me about the error for reference
STATUS_INVALID_GPT (0xC0030008) pls if you have gotten the solution. pls email me on [email protected] / thanks
theaddus said:
[email protected]
Click to expand...
Click to collapse
give me the soulotoin pleas
Related
Hi, I was trying to use Flash tool and Don't know what happend but My Phone is completely DEAD right now even power button is also not working no screen is there (just blank phone).
I am having UMI X2 2GB rom, 32 gb internal memory, 1.5 GHZ (MT6589T) Model.
I tried to use SP Flash tool to recover my phone. Firstly I tried to format the phone, After that I tried to run the correct scatter file for MT6589 (from one of the ROM Posted under UMI-X2).
Drivers for the SP Flash tool is loaded correctly (into my Windows 8 Pc). I was previosly getting error as follow : SP FLASH TOOL ERROR: (8200)
[Platform Error] The load and target are inconsistent!
Now, after searching a lot I found that its something wrong with SP Flash tool version.
So I downloaded SP Flash Tool V3.1304.O.sn119 version. After that I am trying to "Download" the rom (with the correct scatter file for my ROM). but its only showing me RED Bar (with 100%) and after that it does nothing. Its neither showing me any error nor its continuing the process.
I am in serious problem here. Please help me out.
Thanks in advance!
- Umang
umang_nine said:
Now, after searching a lot I found that its something wrong with SP Flash tool version.
So I downloaded SP Flash Tool V3.1304.O.sn119 version. After that I am trying to "Download" the rom (with the correct scatter file for my ROM). but its only showing me RED Bar (with 100%) and after that it does nothing. Its neither showing me any error nor its continuing the process.
I am in serious problem here. Please help me out.
Click to expand...
Click to collapse
Try this version of :
SP Flash Tool
October Official Rom
USB Drivers (if needed)
Works for me.
Necro thread...
I have the same issue.
A couple of days ago the phone just started turning off / locking up when off, and having great difficulty tuning on... i.e. pulling out the battery for a minute or a few times.
Now the phone won't turn on at all. They only sign of life is the charging animation when you plug it in.
Prior to all this, there appeared a window in Chinese with some options. my GF (who's phone it is) just pressed something, no idea what. But she said something about 'drawing on the screen'??? sound like something locked up and the previous frame wasn't deleted from the frame buffer before redrawing the new one... I have no idea.
Anyway, I tried going into recovery to see if there was anything I could do there, unfortunately everything was in Chinese, so not much help. for some reason now, the recovery isn't even working.
Now I can connect to the phone via SPflash, but I get the above response: '[Platform Error] The load and target are inconsistent!'
Some other ROMs I tried give me this response:
'The load to be downloaded is for MT6589;
The target platform is MT6582_S00'
Which is quite suspicious.
Any ideas?
Thanks
hisense HS-U980 bricked....
hi,i have the smartphone hisense hs-u980 with mt6589 or mt6589t, i dont understand.... so, i briched with sp.flash tool and now is ompletly dead,,, can i have ur help-sipport please?
thank u very much
Hs-u980 complete dead/bricked
carretto76 said:
hi,i have the smartphone hisense hs-u980 with mt6589 or mt6589t, i dont understand.... so, i briched with sp.flash tool and now is ompletly dead,,, can i have ur help-sipport please?
thank u very much
Click to expand...
Click to collapse
i have ur same phone and i have ur same problem,my pkone is dead later flash any wrong miui rom from cwm recovery and now is dead,i dont have any idea where is original firmware for sp.flash tool or other how piranha box,please,anyone can please me??? THANK U for read!!!!
I have the same Problem. So frustrating men. If anyone finds a solucion please email me [email protected] ...
SP FLASH TOOL ERROR: (8200)
As i connect my phone it disconnects after 2 seconds..
Please give me a site to download scatter file for my micromax a 310
excuse my poor English
i have axtrom axpad 7e01+ it's pretty good tablet 2 days ago i had an issue when i try to open the tablet it hangs on the logo screen of axtrom and don't open ! so i downloaded the official rom again and the rockship Batch tool 1.7 and followed the guide to re-install rom.
First time trying to re-install it worked successfully but when i tried to open the tablet it had the same issue as before ! so i tried to flash the tablet again and this time i always get this error message
Prepare IDB Failed
and i can't open the tablet tho it's readable in maskrom mode to computer]
i don't know what to do and as a continue of stupidity i disassembled it , thought it's bricked and i really don't know if it is ! ( i had a warranty but the customs service center is too far to go for me )
disassembling did nothing more or less still stuck in this error please help me
note i re-downloaded the rom , tried 2 laptops and 2 USB Cables nothing worked
the error message : im46.gulfup.com/p6qUoL.png
135
maxmono said:
excuse my poor English
i have axtrom axpad 7e01+ it's pretty good tablet 2 days ago i had an issue when i try to open the tablet it hangs on the logo screen of axtrom and don't open ! so i downloaded the official rom again and the rockship Batch tool 1.7 and followed the guide to re-install rom.
First time trying to re-install it worked successfully but when i tried to open the tablet it had the same issue as before ! so i tried to flash the tablet again and this time i always get this error message
Prepare IDB Failed
and i can't open the tablet tho it's readable in maskrom mode to computer]
i don't know what to do and as a continue of stupidity i disassembled it , thought it's bricked and i really don't know if it is ! ( i had a warranty but the customs service center is too far to go for me )
disassembling did nothing more or less still stuck in this error please help me
note i re-downloaded the rom , tried 2 laptops and 2 USB Cables nothing worked
the error message : im46.gulfup.com/p6qUoL.png
Click to expand...
Click to collapse
up no one can help ?
115
up
maxmono said:
up
Click to expand...
Click to collapse
up again
maxmono said:
up again
Click to expand...
Click to collapse
still seeking help
no help ?
What happened:-
I have Micromax A114(Canvas 2.2) which has MT6582 chip. One day when I restart my phone got a screen with white background that says "Encryption Unsuccessful" you need to reset ur phone. I tried to wipe cache and data from recovery it said "unable to mount". So I re-flashed the official stock rom(the one that I was running on my phone) but the flash process was unsuccessful.
You will find all the screenshots here http :// download. pratiyogitadarpanpdf. com/cover/a114flash /index.php
What is the current situation with my phone:-
It is not starting up not even any sign of charging when connected to charger, but when connected to my laptop it shows "Micromax A110 Preloader USB VCOM Port (COM42)" in the device manager. Sometimes it also shows "MediaTek DA USB VCOM Port (COM73)"
What I've tried:-
1. I tried flashing different ROMs compatible with my phone but getting the Brom error s_dl_pmt_err_no_space (5069). So, it is not the problem with the size of ROM, i guess.
1.1 Flashing with "firmware upgrade" option throws "Failed to get PMT info"1.2 Flashing with "download" option says "partition management table is not found. Please use "format+download" option."1.3 Flashing with "format all + download" option throws "Brom error S_DL_PMT_ERR_NO_SPACE (5069)"1.4 When tried to auto format flash (with format flash except bootloader option), it says "S-DL_READ_PT_FAILED(5073)":crying:2. I used different versions of sp_tools from 3.2 to latest version 5. But, still getting the same error with all versions.
3. I tried to readback with sp tools it says OK.
4. When I tried memory test in sp tools with the scatter file of official rom(that was running fine on my phone earlier), it gives error S_DA_SDMMC_WRITE_FAILED (3149) and same old NAND FLASH NOT DETECTED error in the output.
5. But when I flashed only the preloader of the same rom with "format all + download" option, it was formated and flashed successfully.:fingers-crossed: But then try to flash the other files of that same rom, it again shows "Brom error S_DL_PMT_ERR_NO_SPACE (5069)"
6. I don't have Mtk_Droid_Tool backup files for my phone. And it is not detecting my phone.
7. I read other threads on XDA with similar symptoms but no luck.
What should I do now? Help needed.
I tried searching for the solution on the internet continuously for like 4 days and found things that do nothing. Please suggest me what to do? Should I giveup or what? I love my phone very much:crying:. I seriously need your suggestions.:angel: Any help would be highly appreciated.
occurred same problem with my phone canvas 2.2
occurred same problem with my phone canvas 2.2 before 4 days and I am trying to search out any resolution on internet but yet not succeeded; Let's hope someone from XDA will help us in this matter.
mcn18cm said:
occurred same problem with my phone canvas 2.2 before 4 days and I am trying to search out any resolution on internet but yet not succeeded; Let's hope someone from XDA will help us in this matter.
Click to expand...
Click to collapse
fingers crossed
I am facing the same problem! Exactly the same problem with the same device.
Any solution to resolve this error?
Brom error: S_dl_read_pt_fail (5073)
i have the same prlbm .....
do you guyzzz have any solutions...??
I just hard-bricked my phone(Canvas Magnus A117) as well. No luck in finding any solution to this. It was working fine until I decided to reboot it just like that. Got the same errors after trying at the same level.
Same problem happened to my A114
Anyone get their phone rectified?
I had same problem while flashing. I took it to 2-3 places, they said it cannot be rectified. I however did not contact service center. Anyways, did the problem solved for anyone of you
I have a problem with my Paris X device. I had an unofficial rom and I wanted to flash the official one. When I started the flashing process with SP flash tool I got this message: "BROM ERROR: S_INVALID_BBCHIP_TYPE (0x3EB)"
Since that my phone is like dead. I cant switch on, I cant either flash again because my driver disappears in 2 seconds and I got the same error everytime.
Please help me, I would really appreciate it. :fingers-crossed:
hi i also bought paris x last year tried to flash it today using sp flash tool with official android 6 rom everything fine until i clicked download...
pmt changed rom - error #1
so then i looked up im supposed to switch to firmware upgrade but that resulted in error
s_invalid_bbchip_type - error #2
now my phone is bricked and whenever i connect it to my pc it appears for about 2 seconds and then disappears...
well im hoping that someone here could actually help cause this is really frustrating and i need to be able to use my phone next week... :/
thanks for replys
same probleme here
invalid bbchip type (0x3eb)
If anyone have this solution, Then please reply
I have also this type of problem In my Intex ace mini mobile
I also experienced problems like that, and couldn't solve it.... ERROR: S_INVALID_BBCHIP_TYPE (1003)
slekdor50 said:
I also experienced problems like that, and couldn't solve it.... ERROR: S_INVALID_BBCHIP_TYPE (1003)
Click to expand...
Click to collapse
Check the scatter, make sure that the line, i.e. matches the device chip type:
platform: MT6735M < -- is this correct?
peti2ty said:
I have a problem with my Paris X device. I had an unofficial rom and I wanted to flash the official one. When I started the flashing process with SP flash tool I got this message: "BROM ERROR: S_INVALID_BBCHIP_TYPE (0x3EB)"
Since that my phone is like dead. I cant switch on, I cant either flash again because my driver disappears in 2 seconds and I got the same error everytime.
Please help me, I would really appreciate it. :fingers-crossed:
Click to expand...
Click to collapse
I think this is scatter file mismatch, because I have done a proper read back of Inew L4 mt6735 to flash it to another phone with exact same model and build. But that flash file is not even working to flash that phone from which I made it giving this same error.
ERROR: S_INVALID_BBCHIP_TYPE (1003)
Still working on it.
[Update]
Only a single "m" in MT6735M in scatter file was missing, now its working all fine. :fingers-crossed:
I searched the whole internet for years to solve this error...
So if your getting this error better check your scatter platform names etc.....bcz even if you get it from readback or official flash files, like in my case it can give you error.
If you're getting this same error every time so try the above advice and here is a tip for early disconnection, connect while holding volume button or open yiu device and find kcolo[\B] and short it with GND.(better find details from google bcz i am too funding it)
Hello guys! I have a problem with one phone that i am trying to fix for someone and I feel sooo, sooo completely lost in all of this as I know almost nothing about this. The cell phone model that is in question is Alcatel One Touch Pop C3-4033x.
It seems to be using a Mediatek chipset and I was reading some of your advices here & there and tried using the program called SP FlashTools but it always resulted in error, in the end. It seems that something is wrong with this phones emmc flash memory. So, I tried transfering some files as a zip files to the SD-card and tried to apply update from it, but it said always: Installation aborted. And then, I have tried looking for a way to flash stock firmware of that specific Alcatel model on SD-card, but I just don't have any clue how to do it, if it is possible, even. Maybe I should just give up trying?
Oh, I almost forgot to write that the phone doesn't have the access to Android OS and USB debugging isn't turned on, because computer doesn't seem to list it and I don't know if there any button combinations that Alcatel uses for this model to get into that fastboot or adb mode, even though have installed mediatek drivers. It can only get into Android System Recovery 3e. That seems to be everything, I think, at least.
Oh guys, I am so, so, so sorry if I am bothering you with this. I just didn't know what or where else to ask this. Thank you sooo much!
Hi download those files:
Firmware:
https://www.mediafire.com/file/bpm4ibsbmr4q6nc/OT-4033X-Without_Mobilis_logo__BY_GSMSERVE.rar/file
SP Flash tool:
https://androidfilehost.com/?fid=11410963190603870440
Driver:
https://mega.nz/#!8VYkQCxD!fkhTrZwFFILDAglO1cR_8pIM4Cel52brZ7RB6QZoc6o
Once you downloaded all right driver open SP flash tool and add Scatter file
MT6572_Android_scatter.txt
Click on Download , connect your phone without battery and see if the process is going on if not try again with battery inside.
If you end up with error do the same thing but now first do Format then after is Finish do Download. Good luck ...
It still displays error :/
Teddy Lo said:
I have tried to do everything like you have said, but it still displays error when i press the Download button, and it displays that error after some seconds pass and also the same happens hen i try to use the Format function. This is the error it displays when i tried with the download button: BROM ERROR: S_DA_SDMMC_WRITE_FAILED (3149)
And this is the same error it displayed when i tried using the Format function: S_DA_SDMMC_WRITE_FAILED (3149)
i am so, so sorry for bothering with this.
Click to expand...
Click to collapse
Try with another version of SP Flash tool little bit newest .