Kata T2 recovery problem - Android Q&A, Help & Troubleshooting

So i have this tablet that's been locked because of forgotten screenlock password.
i've looked everywhere for solution but its too many that makes me confused where to try first because of multiple problems that my tablet has, like:
Its not connected to our wifi. (For google recovery.)
It's usb debugging is off.
and it doesn't have default android recovery boot.
I want to flash new recovery like CWM or TWRP however, it looks like that my device is not supported.
It's chip is not Mtk? and i can't find stock rom for my model. As much as possible, i want to save files but if the only solution is factory reset, then i'll go.
guys please help me. Its android version is 4.1
Sorry for wrong grammar but i hope you understand it. Thanks!

Related

[Q] Sanei N77 can I have the CM on it?

Hi there freaks,
I'm an owner of this chineses piece of... art. And um it's kinda laggy so I decided to use the Greenify and SDMaid apps to get it to better shape. After spending few days in a row trying to find a way to get it rooted, I've found this forum and the thread where they presented a way to root most of the tablets on the market. Well I was scared cause I did not find a single tip about how to turn back the changes (in case I'll brick it-my wife would kill me;p), any way I decided to give it a shot and it worked. I keep getting info that root was not found sometimes but I need to reboot it and start over and in fact it seems to be rooted.... anyway I need to speed it up a bit more.
Can I install the CyanogenMod on it? And I can - which partical version will work fine with my tablet? I've found CM roms for Sanei N10, Sanei N83, N90 etc etc but nothing for N77. I can't even compare the roms cause I have no idea what is the exact hardware installed in it and don't know any way to find out. I could look for a specific CM rom that has drivers to my device but don't know what's installed in it. I know that there is probably no way to get back to the original Android 4.0.3 ICS which I have installed right now.
All I can provide you with is the model name and basic info like:
Device name: Sanei N77 Elite
CPU: Allwinner A13 1.5GHz
GPU: Mali -400MP
RAM: 512 DDR2
Int.Memory: 8GB
Display: IPS WVGA 800x480px, TFT
Wifi: 802.11bgn
No 3G support - but they say I can have it working with these modems: E1916, ZTE AC2736, HUAWEI E1750, HUAWEI EC122, HUAWEI EM770W
Thank You for Your attention and possible help
---> anyone?
I have this piece of art as well.
After a lot of hassle and searching around I managed to boot CM10 on it. (just need a few patches to make it fully working, was too lazy at first)
Basically all you need is this:
http://forum.xda-developers.com/showthread.php?t=1886460 - ROOT, select old special or new standart root, whatever works (depends on firmware installed)
http://forum.xda-developers.com/showthread.php?t=2189640 CWM based recovery
http://forum.xda-developers.com/showthread.php?t=2343531 CM10 ROM for Allwinner A13 Tablets + patches
BTW, if you boot into recovery, format system and then reboot tablet without any ROM flashing, it will become bricked as there is no way entering recovery mode without adb (as far as I know) on this piece of art. In this case you would have to flash one of the stock firmwares (download flashing package from there) and then do everything all over again (root+install cwm)
EDIT: Since my touchscreen is not working now (haven't flashed patch for it in the first place) and as it turned out USB debugging in this CM10 build is off by default (so I don't have access to ADB nor CWM), I need now to do this whole process all over again, lol.
EDIT2: It turns out there is not patch for ft5x_ts (touchscreen included), gonna pull it from stock fw and make flashable zip, will upload it here as well.
Ok I found it there http://forum.xda-developers.com/showthread.php?t=2189569
just found out some one replied to my post here i already gave up on modding this but i will check it all again when i get back to my pc. do you have it working finally? how is the performance with cyanogenmod? thanks mate
k i'm reading it all now, lot of things are not clear enough for me yet, can you lead me step by step? or do you have a ready working image of the system that i could simply flash into this tablet? how? thank you
im stuck on installing cwm it installed perfectly fine but when im trying to enter cwm on booting nothing happens except the ics is loaded in emergency mode....
btw this tablet has only 3 buttons which is power. vol+,vol-. no enter button at all... could you help me on this?
survivor1986 said:
just found out some one replied to my post here i already gave up on modding this but i will check it all again when i get back to my pc. do you have it working finally? how is the performance with cyanogenmod? thanks mate
k i'm reading it all now, lot of things are not clear enough for me yet, can you lead me step by step? or do you have a ready working image of the system that i could simply flash into this tablet? how? thank you
im stuck on installing cwm it installed perfectly fine but when im trying to enter cwm on booting nothing happens except the ics is loaded in emergency mode....
btw this tablet has only 3 buttons which is power. vol+,vol-. no enter button at all... could you help me on this?
Click to expand...
Click to collapse
Please... anyone?? Cant install CWM, tablets boots normally but in emergency mode instead of CWM While using built-in recovery mode I cant do anything except navigating Up and Down in the android recovery menu Power button does nothing in this case....
HELP!!!!!!))
will the external usb keyboard work in the recovery mode??? i will buy one in that case...thanks

Bricked HUAWEI Y6

Heyhey,
I've been directed here from the XDA-assist forum (so yes, I am quite new here ), I hope that this is the correct place for my questions.
My problem is this:
I have an Huawei Y6, SCL-L21 with android 5.1 (I think it was 5.1, it was definitely 5.something). Following a youtube-video, I tried to root my phone using kingoapp. It said it was successful, but I didn't saw the SuperSu app, so I tried rebooting first. Now it seems that my phone doesn't want to boot up any more :/. I just get the Huawei logo and that's it.
I can still get into the recovery menu (EMUI, the one that was original on the device, access through sound up + power on), so I still have some hope :/. I've tried 'wipe cache partition' and 'wipe data/factory settings', neither helps.
It has come to my attention that reinstalling a back-up from the original rom might help. I, however, do not have a back-up (it will be the first thing I will look for when I get my phone working again though).
I have been searching for a stock rom, or even an custom rom that I could use to get my phone working again.
I've found a site with a custom rom that was supposed to work for my phone, but when I try it by putting the dload folder on an external (32G) SD-card an powering up my phone by pressing sound up + down + power on, I get 'Software install failed!', so apparently that is not of much help :/.
So what I wondered now, most importantly, Is there a way to get my device working again?
And also; What could be the reason that the installation of a rom fails? Could it be something I'm doing wrong? Can it be that it still needs an OS installed and that it is actually more of an update instead of a new OS? Can there be something wrong with the SD-card(wrong formatting or whatever) ?
And off course; if I can only get my device to work again using a rom; Is there a place known where I could find/get stock or custom rom's?
Any help would definitely be appreciated!
Kind regards,
Ilja_B
OK! So, I have found the factory ROM and was able to get my phone to work again ^^
I've put it on the SD-card and booted my phone the way I explained above. So apparently there was no problem with my SD-card.
I wanted to post the link here as a reply in case anyone else needed it, but apparently I can't post links :/
Does anyone has an idea where a good place would be to post this, so others might also benefit?
Grtz,
Uplad to google drive
i have the same problem help me please
I've found my ROM on the bottom of this page here [1] under the 'download'-tab. From the name of the file I get that this is for the Huawei Y6 SCL-L21 for Germany, Italy, Netherlands, Belgium, Portugal and others. Hopes this helps, or at least gets you on your way to find the correct ROM for yourself. You should find a proper explanation on how to install the ROM online.
[1] http://m.huawei.com/bemobile/consumer/mobile-phones/detail/huawei-y6-benl.htm
thanks but i already downloaded it but didn't work

[YPGS1][3.6]Impossible to access recovery mode

Hi guys!
I own a Samsung Galaxy S Wifi 3.6 (Europe version) since december 2012. I actually want to give it a new life (it was my first Android device) by rooting it and maybe installing a custom ROM. While searching on XDA forums, I discovered that thread, I absolutly wanted to test it, and now I'm blocked at step 5: I can't access recovery mode.
The problem is, when I'm holding buttons to access recovery, it simply starts my device launching Android system. I tried like 50 times to access recovery mode. I'm using ODIN, and I was able after that failed try to recover a stock, working system of my Samsung (I can use it, but it is still the same old 2.3.6 Android version).
I want to point that I'm not a newbie in modifying Android devices: I'm playing everyday with my incredible Nexus 7 2013. And I remember that I accessed recovery mode maybe in July-August 2013, before sending my device to the vendor, who fixed it and sended it back to me (so it's still the same device). And if I start a thread rather than writing a new post in previously quoted thread, it is because I think that my device is the only problem.
If anyone can help me, by suggesting something or completly solving my problem, I will just love him. ^^
Thank you in advance!
Nierven said:
Hi guys!
I own a Samsung Galaxy S Wifi 3.6 (Europe version) since december 2012. I actually want to give it a new life (it was my first Android device) by rooting it and maybe installing a custom ROM. While searching on XDA forums, I discovered that thread, I absolutly wanted to test it, and now I'm blocked at step 5: I can't access recovery mode.
The problem is, when I'm holding buttons to access recovery, it simply starts my device launching Android system. I tried like 50 times to access recovery mode. I'm using ODIN, and I was able after that failed try to recover a stock, working system of my Samsung (I can use it, but it is still the same old 2.3.6 Android version).
I want to point that I'm not a newbie in modifying Android devices: I'm playing everyday with my incredible Nexus 7 2013. And I remember that I accessed recovery mode maybe in July-August 2013, before sending my device to the vendor, who fixed it and sended it back to me (so it's still the same device). And if I start a thread rather than writing a new post in previously quoted thread, it is because I think that my device is the only problem.
If anyone can help me, by suggesting something or completly solving my problem, I will just love him. ^^
Thank you in advance!
Click to expand...
Click to collapse
Did you try: adb reboot recovery?

SLA-LA00 Recovery/Firmware Update

Hi All,
I have a Huawei Enjoy 7 - Model SLA-LA00 (running Nougat 7.0, EMUI 5.1, Boot is unlocked).
I'd like to root it, but I've tried Kingoroot, King Root, iRoot etc and it repeatedly fails. On checking it seems that my device isn't compatible with those apps. I would like to use the ADB method, but there's no custom recovery image for the SLA-LA00, I've also checked and it seems, there isn't but please correct me if I'm wrong.
Is there a custom recovery available for my model?? Also, I've tried looking but, is there an International firmware for this model??
Any assistance would be appreciated, thanks.
Regards,
marquez010
Hello, was going to create a new thread, but think yours fits what I need to ask aswell.
Same phone here, bought it in Shanghai and now in Brasil, was trying just to make it google able. Salesman at the official Huawei store tricked me to think it would just need access to a open network for it to work. Silly me.
Well, as you, unlocked it with ADB and with no answers from nobody, tried to flash it with a random TWRP. Obviously didn't work. Now the phone wont boot into system, but i still can manage to put it in fastboot mode and it still replies to ADB.
Question is if someone that knows better than me can tell me what to do to at least get back where I was, before I finish killing this damm stupid phone, wich also doesn't seem such bad idea.
lucasresende said:
Hello, was going to create a new thread, but think yours fits what I need to ask aswell.
Same phone here, bought it in Shanghai and now in Brasil, was trying just to make it google able. Salesman at the official Huawei store tricked me to think it would just need access to a open network for it to work. Silly me.
Well, as you, unlocked it with ADB and with no answers from nobody, tried to flash it with a random TWRP. Obviously didn't work. Now the phone wont boot into system, but i still can manage to put it in fastboot mode and it still replies to ADB.
Question is if someone that knows better than me can tell me what to do to at least get back where I was, before I finish killing this damm stupid phone, wich also doesn't seem such bad idea.
Click to expand...
Click to collapse
Hi , all you have here :
https://www.getdroidtips.com/huawei-enjoy-7-b161-nougat/
Hey, thanks a bunch. Found that post before, but it looks like its for an older version of this phone. Mine was running b190 nougat. Don't know if should try to flash this one, but if no other ideas, will try it.
Well, was able to boot it again. Flashed it with yet another twrp that i found for a similar (or so i think) huawei and even tough it didn't work, when I connected the phone to the charger and it responded the power up volume combination and allowed me to reboot normaly.
Guess I'm back to where I started. Think now is better to wait, maybe there wiil be a moe suitable release of a gms core package that it requires for google play to work (have it, but installation fails on rebbot) or twrp updates with a version that works for me and then I can try to install gapps thru it.
Back to my old crappy lg now.

Ulefone Power 2 TWRP bootloop, cant flash ROM

Hey guys, this is my first Thread in xdadevelopers
I am pretty new to coding and all this "behind the UI" stuff, but i am eager to learn more, since its really fun.
So i have got a new Phone : the ulefone power 2 with MTK6750T Prozessor. It has quite the battery with 6000mah, but i still wanted to root the device to archieve like one week battery time or so xD
I rooted, installed TWRP recovery and some apps, everything just went fine. I didnt install a custom rom, since i didnt find any for this phone. Well, i wont buy mtk phones anymore, since they dont offer open source code with all its community possibilities
Anyway, today the touchscreen suddenly stopped working. I thought its a common bug, restarted it. Now it wont start the OS anymore, its only booting in TWRP. I dont remember well, but it said something like "phone is not safe, gotta factory reset".
Since i have TWRP, i just did the reset. Without success though. Its still booting into recovery and cant shut down either, whatever i chose in TWRP options.
My next thought was flashing a new ROM with TWRP, which doesnt work due to "zip file is corrupt" error, even though its the stock file from ulefone.com
Since TWRP has a command terminal, it might be possible to use to stop the recovery bootloop when connecting to pc? in this case i might be able to use adb, but atm i cant, and the battery is non removable
I dont care that much about having a phone, i could just buy a new one (xiaomi redmi note 4x it would be), but i would really like to fix this and enlarge my knowledge for situations to come.
Hopefully someone of the professionals here can help. There is a similar Thread already by drkeey, but in my case i can still use TWRP with my mouse, so there might be hope.

Categories

Resources