edit: NOUGAT ROMS ALSO WORKS ! But oreo/pie roms give me screen of death issues after locking device .
If i let it connected to charger then display works fine . No issues after unlocking ...
Also latest twrp recoveries having same issues . But if i flash old twrp recovery screen works fine .
Also if i turn off device and connect charger theres no sign of charging indicator but its still charges .
phone charges normally when powered on.
Please any one can help ?
I recently installed new display on le max x820 .
But after installing display and flashing new rom . Now whenever screen goes to sleep it wont unlock. I can take screenshots and calls/notifications also coming .Led is also blinking. Phone works normally but as soon it goes to sleep or i lock it by myself .display wont come up .
Also phone doesnt charge when i switch off phone . no icon or led shows up if i powered off and plugin charger .
but phone charge normally when phone is siwtched on .
i tried different roms also tried qfil method but none of them solved my problem except cuco fastboot rom 5.9
it works 100% but i want to update to oreo as i was using it previously but now i dont have any other options.
i tried diffrent qfil files and fastboot also stock ones but to no avail
can someone please help me ?
can anyone help ?
bump
Related
Hi, I have a Galaxy S2 (I9100) that's on a stock rom GB 2.3.4
The kernel is KH3.
Phone works fine, but I cannot update to higher android version because KIES says my device cannot be updated with KIES.
After searching these forums I managed to root my phone (flash a rooted kernel with ODIN) and installed a custom rom.
I tried MIUI rom (JB) and also ParanoidAndroid (JB) and both have the same problem.
The screen shuts off after the 30 sec setting, but then after 1 sec it's ON again.
After 30 sec its shuts off, and after 1 sec it's ON again
If I flash a stock rom back (KH3) the everything is fine again.
Also flashed a MIUI ICS rom, which has the same problem!!
Anyone heard of this problem before, or knows what to do??
1. Did I do something wrong?
2. Is there a way to go to ICS stock rom (KIES or another way)?
Please help....
1. Flash a different kernel
2. Or go to Sammobile and download stock firmware, flash it with Odin.
Sent from my deep fried potato
Did you do full wipe before flashing a custom rom?
Yary12 said:
Did you do full wipe before flashing a custom rom?
Click to expand...
Click to collapse
I did
- factory reset
- wipe cache
- wipe dalvik
Then install rom
if custom rom - screen on after 1 sec.
if stock rom - screen normal
************************** UPDATE **************************
Flashed a stock kernel from SAMMOBILE (Latest ICS 4.04 for Netherlands) with ODIN
Same problem !!! Screen turns off after time out, 1 sec then turns on again..
I found that with this firmware an app called "Screen Off And Lock" was installed.
Does that mean that Samsung knows the problem occurs in ICS (and higher).
I checked the option with the delay especially for devices tjat turn screen on again after turn off,
but still the same problem stays.
******** ANOTHER UPDATE *********
Just found out....
Everything works OKAY if I connect the phone to my PC.
It's charging then offcourse, and the USB is connected then.
That must be a clue to the solution, but I haven't found it yet.
Maybe someone else has an idea now (I really hope so)
ferjen said:
******** ANOTHER UPDATE *********
Just found out....
Everything works OKAY if I connect the phone to my PC.
It's charging then offcourse, and the USB is connected then.
That must be a clue to the solution, but I haven't found it yet.
Maybe someone else has an idea now (I really hope so)
Click to expand...
Click to collapse
Maybe your usb port is f*cked like mine, Does it happen only when you fully charged the phone ? becuz my device recognize it as charging(when not having a charger connected), ---> so connecting/disconnecting every time . . My screen goes on/off cuz it connects/disconnects the charger (while no charger connected.) If this is your problem u can try cleaning usb port or check this post http://forum.xda-developers.com/showpost.php?p=30290884&postcount=3619
Unexist6969 said:
Maybe your usb port is f*cked like mine, Does it happen only when you fully charged the phone ? becuz my device recognize it as charging(when not having a charger connected), ---> so connecting/disconnecting every time . . My screen goes on/off cuz it connects/disconnects the charger (while no charger connected.) If this is your problem u can try cleaning usb port or check this post http://forum.xda-developers.com/showpost.php?p=30290884&postcount=3619
Click to expand...
Click to collapse
I don't think this is the same as my problem, because in GingerBread everything is OKAY...
Thanx anyway.
Hello Devs,
I have problem charging my s3 international version.
My phone is rooted and running custom rom s5 sensation v4.0 kitkat 4.4.2 with boeffla kernel v6.0 and latest CWM touch recovery.
I have flashed many custom roms before and all was working good before. The phone was also charging properly before.
But after some time when 4.3 was released I have flashed s4 revolution.
After flashing that rom my problem started.
1st problem was the phone was not gettin connected to my cell tower. Later after searching soo many hours on google I found out that it changed the efs version from v1 to v2. So I found out a rescue zip file which include only modem of xxemg4. I flashed it and then all was working good.
After some time I faced a problem of reverse charging means the phone is kept on charge but instead of charging the battery decrease. So again I searched on google about my problem and found out an app called galaxy charging current which show the power that is getting the phone while its connected to the charger. when I installed it and saw the current it was only showing max 100 min 999 and avg 100. I saw some where that the default current the phone should get is 1000 in max.
I searched alot on google on how to solve this problem, tried many diffrent rom , tried changing my charger, tried to flash back the previous rom which I was using in which I was not having any problem but after doing all this the result was same.
when I connect to the charger it shows 700 In max n after some time it keeps going down like 500 then 300 then last 100.
So after searching on google I have found out a solution of flashing custom kernel. I flashed googymax kernel in which using sTweak we can configure the battery power and ignore safety measures and unstable power.
After doing that my phone gets max 1000 min 1000 and avg 999.
My problem is that when ever I flash new rom I hav to flash custom kernel to ignore the unstable power and safety measures to properly charge my phone.
is there any way I can get back as before I was charging my phone without flashing custom kernel...???
Any answer will be appreciated.
Note :- I was using the original charger which I got in the box while purchasing.
First replace your battery, charger and lead, then flash full stock firmware with Odin.
What happens when you attempt to charge the phone completely off. Do you see the charging graphic?
If something is wrong with the micro-USB port then a wireless charging solution might be your only option.
You could try reloading the firmware using the Kies software on your PC - here's an overview of what to do:
- if you don't already have the Kies software installed on your PC, download it (just search Google) and install it. The first time it runs it'll update itself to the latest version so make sure you run it once before proceeding.
- put your phone in Download mode: with the phone completely off, press and hold the Volume Down and Home and Power buttons simultaneously, and release them all when you see the Samsung splash screen
- connect the phone to your PC with the USB cable that came with the phone
-- if you've never had the phone connected to your Windows-based computer before, you'll see messages about installing drivers, etc - just wait until this is done (may take 5 or 10 minutes) [I don't know what happens if you have a Mac - it probably just works]
- in the Kies software, select the second item in the Tools menu and just follow the prompts to enter the model number (in CAPS) and IMEI/Serial Number (both found under the battery - it's ok to remove the battery at this point)
- the Kies software should start downloading the correct firmware for your phone from the Internet; once that's done (depending on your Internet connection speed) it'll begin downloading that to the phone (this probably takes 10 minutes or so)
Thnaks for your rply
boomboomer said:
First replace your battery, charger and lead, then flash full stock firmware with Odin.
Click to expand...
Click to collapse
1st of all thanks for replying on my query.
As u stated to change the battery, Charger, Lead and to full flash stock firmware.
I already did that.
I have tried my friends battery with his charger ( not the 1 which come in box ).
but then also its the same.
Whats the problem in it.
Is it a software fault or hardware fault....???
Hermosa said:
What happens when you attempt to charge the phone completely off. Do you see the charging graphic?
If something is wrong with the micro-USB port then a wireless charging solution might be your only option.
You could try reloading the firmware using the Kies software on your PC - here's an overview of what to do:
- if you don't already have the Kies software installed on your PC, download it (just search Google) and install it. The first time it runs it'll update itself to the latest version so make sure you run it once before proceeding.
- put your phone in Download mode: with the phone completely off, press and hold the Volume Down and Home and Power buttons simultaneously, and release them all when you see the Samsung splash screen
- connect the phone to your PC with the USB cable that came with the phone
-- if you've never had the phone connected to your Windows-based computer before, you'll see messages about installing drivers, etc - just wait until this is done (may take 5 or 10 minutes) [I don't know what happens if you have a Mac - it probably just works]
- in the Kies software, select the second item in the Tools menu and just follow the prompts to enter the model number (in CAPS) and IMEI/Serial Number (both found under the battery - it's ok to remove the battery at this point)
- the Kies software should start downloading the correct firmware for your phone from the Internet; once that's done (depending on your Internet connection speed) it'll begin downloading that to the phone (this probably takes 10 minutes or so)
Click to expand...
Click to collapse
Thanks for the reply.
When I try to charge my phone when completely off, 1st it was showing me the graphics of battery charging when I was using 4.3 Custom Rom. But since I flashed my phone with 4.4 Custom Rom, I can't see the graphics of charging battery now.
As per your overview above I have tried all the possible ways to get back charging work properly ( your overview was also included in it ) but I dont get any success in it.
Now I have to compulsory flash custom kernel which supports the options of ignoring unstable power and safety measures.
But then also I will try to do what you told me.
Once again thanks.
everyone know what is the problem of my device? im on xt1521. after flash custom rom my charging display is gone. (Charge in off) i tried to flash another rom and its the unofficial cm6.0 and the charging display is work again.. then i go back to stock firmware and the charging display is not work again..
Hello guys,
I've recently bought a Redmi Note 3 Pro (3GB RAM) and the first time I booted it up it showed that it has -2% battery life. Since this seemed strange I tried to charge for several hours, but no change was noticed. I then tried with a battery calibration app, tried factory reset and restarting the phone, but nothing helped. I am also not able to go in recovery mode for hard reset as it states that there is no charge ...
The strange thing is that the phone is working for now and I am using for a second day with still the same bug. This leads me to believe that the problem is most likely caused by incorrect battery stats saved on the phone, but I am not sure. I am also not willing to root it or flash it since it is brand new and I might lost the warranty.
Can you guys suggested me a solution for this or the problem is not easily recoverable?
Thank you for the time and answers!
I have the exact same problem, tried resetting everything, I suspect it is a hardware problem.
awedxz said:
Hello guys,
I've recently bought a Redmi Note 3 Pro (3GB RAM) and the first time I booted it up it showed that it has -2% battery life. Since this seemed strange I tried to charge for several hours, but no change was noticed. I then tried with a battery calibration app, tried factory reset and restarting the phone, but nothing helped. I am also not able to go in recovery mode for hard reset as it states that there is no charge ...
The strange thing is that the phone is working for now and I am using for a second day with still the same bug. This leads me to believe that the problem is most likely caused by incorrect battery stats saved on the phone, but I am not sure. I am also not willing to root it or flash it since it is brand new and I might lost the warranty.
Can you guys suggested me a solution for this or the problem is not easily recoverable?
Thank you for the time and answers!
Click to expand...
Click to collapse
Try updating, I had this issue with custom ROM's something certain boot images have this bug.
I flashed a new boot image and bug was gone but had no wifi reverted back to latest global stock via MiFlash.
If you have TWRP try the ROM here https://xiaomi.eu/community/threads/6-7-7-11.32639/ it seems ok.
Did anyone find a fix for this issue. I have the same problem. Battery percentage shows negative 2% and I can't get into recovery because of that. When I press Power and Volume + It shows the battery icon in red and won't let me into recovery. I have the Redmi Note 3 Pro Snapdragon version.
I tried flashing a couple of ROMs via MiFlash with no positive results.
Maybe a bit late, but the "camera fix" in this Thread fixed my "-2%"-Battery
http://forum.xda-developers.com/red...cyanogenmod-13-0-xiaomi-redmi-note-3-t3350656
Just flash with TWRP.
5t4m said:
Maybe a bit late, but the "camera fix" in this Thread fixed my "-2%"-Battery
http://forum.xda-developers.com/red...cyanogenmod-13-0-xiaomi-redmi-note-3-t3350656
Just flash with TWRP.
Click to expand...
Click to collapse
What rom are you using?
EkiFox said:
The camera fix works only with Santosh's CM13, not with other CM/AOSP roms
the new kernel Radon V1.8 by Umang96 does not fix the battery problem
Click to expand...
Click to collapse
The Radon V1.8 Kernel actually causes this bug on MIUI based roms, so don't flash the kernel.
Radon Version 1.9 will resolve the battery bug on MIUI and other roms.
Talking about cm/aosp I tried almost all combination kernel/rom.
No success except for this particular cm with camera patch.
Same problem with battery, showing -2% but phone is working... Plz provide solution asap
If u run MIUI, just download FASTBOOT ROM, restart phone to FASTBOOT MODE and flash ROM using this tool. But if u run custom ROM just flash custom kernel (like RADON).
5t4m said:
Maybe a bit late, but the "camera fix" in this Thread fixed my "-2%"-Battery
http://forum.xda-developers.com/red...cyanogenmod-13-0-xiaomi-redmi-note-3-t3350656
Just flash with TWRP.
Click to expand...
Click to collapse
Fixed the -2% Bug on latest CM13-Snapshot for me!
You Sir are awesome
flashed the latest global firmwareware(not developer one) solved my issue, also now my phone updates OTA.
Use only the official rom. custom that sellers flash usually is a junk just with additional options for menu's language!
Same problem with battery, showing -2% but phone is working... Plz provide solution asap what to do. .. mobile automatically switch off too
Geeta_ghai said:
Same problem with battery, showing -2% but phone is working... Plz provide solution asap what to do. .. mobile automatically switch off too
Click to expand...
Click to collapse
Flash the latest miui ROM in edl mode using miflash. That is the answer.
No
No that is not the answer it's a hardware issue short circuit in motherboard
induna said:
Flash the latest miui ROM in edl mode using miflash. That is the answer.
Click to expand...
Click to collapse
androidnandroid said:
No that is not the answer it's a hardware issue short circuit in motherboard
Click to expand...
Click to collapse
Hmm, well flashing an official ROM in edl mode has fixed this problem for many people, including myself. So it would seem that in most cases at least it IS a software issue that can be fixed by flashing.
My phone came from Banggood and a vendor ROM that wouldn't even support my FP reader, Goodix, and which booted up with the -2% battery bug out of the box. Flashing the official global stable ROM, 8.0.2.0 at that time, fixed all of the issues.
Hmmm may be sir but that doesn't seem to fix mine although mine is from xiaomi only and the problem came after using 6 month suddenly without any reason one morning
Ok guys there are 2 solutions to this problem one is drain your battery and don't charge it for 2 3 days drain it like he'll coz after switch off still some juice is left you have to drain completely and other rapid method is open your redmi note 3 and disconnect battery cable and reconnect it... The problem is not software its hardware where battery reading stuck at minimal which is - 2 ... Thinking minus two hours coz at zero still some battery left for edl and fastboot mode time and alarm... Fixed my redmi note 3 hope it will help you.. Coz tried all method format... 10 times flash all roms through fastboot mode Coz updater mode won't work coz of low battery reading... Enjoy guys
I am having a same issue with redmi note 3 SD version. Tried everything Global BETA ROM, STABLE ROMs but didnt solved my issue. Showing -2% bettery in every ROM which i have flashed.
I am facing a similar problem where my phone showed -2 as battery level but my phone is not booting at all without any charger attached. and even when the chargr is connected it boots upt the Mi Logo and then displays an empty battery which wont charge even when tried for hours. Please help
razy111 said:
I am facing a similar problem where my phone showed -2 as battery level but my phone is not booting at all without any charger attached. and even when the chargr is connected it boots upt the Mi Logo and then displays an empty battery which wont charge even when tried for hours. Please help
Click to expand...
Click to collapse
I had the exact same problem like this one on xiaomi redmi note 3 pro sd. I tried flashing fastboot miui 10 official but the problem still there. I also tried changing the usb charging port but still the same. I tried plug in the charger and hold power and + volume and it stuck at mi logo.
I want to know if anyone fix this?? Please help.
Hi guys,
I was using Miui in mi pad 1 but it was really laggy IN VIDEOS and many apps including netflix wont even load in 4.4.4.
I moved to lineage 14.1 shield and apart from camera all were good.
i thought of upgrading to oreo and in middle i broke the device.
I went back to stock rom but i choose latest Chinese build 9.2.4.0 and use mi flash tool to boot it up. I was able to boot fine.
Again i went to custom rom dotos 2.5 and could see on locksreen showing phone charging slowly.
I kept for 3 hours and still same. I thought issue with the rom. WIPE EVERYTHING and again install lineage 15.1. It was able to boot fine but still no charging.
I kept my pad for hours to charge but still red light blinking, not booting up.
I removed the backpanel to remove battery (connector) and insert it again but still same.
I am not sure what to do now. If it will boot up i can go back to stock but it is not even booting to fastboot.
PLEASE HELP.
THANKS
Mont1jack said:
I removed the backpanel to remove battery (connector) and insert it again but still same.
Click to expand...
Click to collapse
Hello Is your problem fixed as I'm also experiencing the same
This also happened to me too in the past, my MiPad 2 is just in storage, still don't know how to fix it. Anyone here fixed this problem?