I tried falshing both L29 firmware and L09 firmware using USB OTG, neither worked. (my guess is that these firmwares are not built for my region)
my phone's build number: LYA-L09 9.0.0.273 (C34E11R1P16) purchased from optus australia and is a single sim card phone.
Anyone experiencing the same issue?
prawnhub said:
I tried falshing both L29 firmware and L09 firmware using USB OTG, neither worked. (my guess is that these firmwares are not built for my region)
my phone's build number: LYA-L09 9.0.0.273 (C34E11R1P16) purchased from optus australia and is a single sim card phone.
Anyone experiencing the same issue?
Click to expand...
Click to collapse
I got the exact model and very same region as you mate and I successfully dload both those firmwares.
What are the steps you are taking ?
souljasteve84 said:
I got the exact model and very same region as you mate and I successfully dload both those firmwares.
What are the steps you are taking ?
Click to expand...
Click to collapse
1. bought a USB c adaptor from kmart (successful)
2. formatted the usb stick then paste the required zips to dload file (successful)
3. connect usb stick to phone via kmart adaptor (successful, i can get access to the zips from my phone)
4. dialed the number and clicked software update (successful)
5. update interface showed up (successful)
6. update failed, phone restarted
prawnhub said:
1. bought a USB c adaptor from kmart (successful)
2. formatted the usb stick then paste the required zips to dload file (successful)
3. connect usb stick to phone via kmart adaptor (successful, i can get access to the zips from my phone)
4. dialed the number and clicked software update (successful)
5. update interface showed up (successful)
6. update failed, phone restarted
Click to expand...
Click to collapse
Maybe try just putting the sd_base zip in the dload folder by itself and try that
souljasteve84 said:
Maybe try just putting the sd_base zip in the dload folder by itself and try that
Click to expand...
Click to collapse
i just tried and got the same result, sigh...thanks anyway
prawnhub said:
I tried falshing both L29 firmware and L09 firmware using USB OTG, neither worked. (my guess is that these firmwares are not built for my region)
my phone's build number: LYA-L09 9.0.0.273 (C34E11R1P16) purchased from optus australia and is a single sim card phone.
Anyone experiencing the same issue?
Click to expand...
Click to collapse
i have the same model as you, and failed in same step, guess not fit our model?
i am using a usbc card read.
prawnhub said:
1. bought a USB c adaptor from kmart (successful)
2. formatted the usb stick then paste the required zips to dload file (successful)
3. connect usb stick to phone via kmart adaptor (successful, i can get access to the zips from my phone)
4. dialed the number and clicked software update (successful)
5. update interface showed up (successful)
6. update failed, phone restarted
Click to expand...
Click to collapse
Guess it is the problem with Kmart USB C Adaptor, as it is not saying it is OTG supported, I used a USBC card read and got same error as yours. Today I change to the USBC OTG then it worked, updated to EMUI 9.1. So try something says USBC OTG adaptor.
Related
Hi,
got a galaxy note 1717,my friend help me unlock and flash
worked fine with wind mobile aws 1700/2100
after couple of days device started to reboot itself once or twice a day, did factory reset- no improvement
now the the device is rebooting and not even starting
it starts with samsung screen , stays on for about 5 to 10 secs and shuts off and restarts again
please help
called samsung and they said they cannot help as its considered out of warranty be-cos my friend he removed the serial no sticker from the back of the phone
the device is not showing any imei no under phone info and is not recognized when connected to the computer with usb even after installing the drivers on th laptop
did you try flashing it back to stock by odin???? another sugestion is to 1. get your serial number from the back of the phone 2. put it in download mode 3. conect it to kies 4. select tools- firmware upgrage 5. kies will asck for the serial number and phone model 6. insrt your serial number and phone model in capital letters
s/n:-------------------
phone model: SGH-I717
AND HIT START AND IT WILL UPGRADE YOUR PHONE TO THE OFFICIAL ICS UPDATE
HOPE I HELP IN SOME WAY
hi I could not do so as i don't have the serial no on the phone as my friend had removed the sticker from the back of the phone so i will not bw able to do so , so what to do and secondly i dont know the process of flashing it back to stock by odin
flow alkaeda said:
did you try flashing it back to stock by odin???? another sugestion is to 1. get your serial number from the back of the phone 2. put it in download mode 3. conect it to kies 4. select tools- firmware upgrage 5. kies will asck for the serial number and phone model 6. insrt your serial number and phone model in capital letters
s/n:-------------------
phone model: SGH-I717
AND HIT START AND IT WILL UPGRADE YOUR PHONE TO THE OFFICIAL ICS UPDATE
HOPE I HELP IN SOME WAY
Click to expand...
Click to collapse
TRY THIS
http://forum.xda-developers.com/showthread.php?t=1740367
Serial number is settings>phone>status then scroll all the way down. iemi there too.
Get a pc and flash the new ics!!
rangercaptain said:
Serial number is settings>phone>status then scroll all the way down. iemi there too.
Get a pc and flash the new ics!!
Click to expand...
Click to collapse
you are correct ranger
Try removing your sd card. Small chance that it may be causing the issue. Why would someone remove the info stickers? Is it stolen?
hi,
i checked , i got the imei no but there is no serial no on that screen.
and yes its not stolen i have the recipt
rangercaptain said:
Serial number is settings>phone>status then scroll all the way down. iemi there too.
Get a pc and flash the new ics!!
Click to expand...
Click to collapse
Weird problem ....phone doesn't recognize sim.
5.1.1 cm12.
Thanks for any suggestion
rockky said:
Weird problem ....phone doesn't recognize sim.
5.1.1 cm12.
Thanks for any suggestion
Click to expand...
Click to collapse
Does it show up on stock? Which rom are you using?
Is it your Sim or do you need your signal? If that you have to enter the apn manually
Did you install/Update to CM 12.1 build?
Do you have baseband unknown under settings>About phone?
If you are new to CM12.1 and have baseband unknown issue. This is a common issue going around for CM based ROMs
you may need to flash stock sony FTF if yours is a non GPE model and then root and flash recovery.
You will get baseband back
sjesudasan said:
Did you install/Update to CM 12.1 build?
Do you have baseband unknown under settings>About phone?
If you are new to CM12.1 and have baseband unknown issue. This is a common issue going around for CM based ROMs
you may need to flash stock sony FTF if yours is a non GPE model and then root and flash recovery.
You will get baseband back
Click to expand...
Click to collapse
Hello to you, I know you posted this a while ago, but I'm having the same problem on a Z ultra bought second hand... I have the error message invalid sim card after inputing the sim code (so the sim card is detected, and is working in another phone) I also have the error unknown baseband as you described. In the same way, when in service menu, if I want to check SIM lock in service info, the app freeze too without displaying anything.
I don't know what the other owner did to the phone though.
any clue for what to do ? I flashed the latest original rom ( 14.4.A.0.108) through flashtool - still sim card invalid -, then tried to flash through cwm another rom, but still the same.
There is also another bug, i don't know whether it's linked or not, but i can't take a picture with the camera app, the app freeze when I click the button !
Any help would be gladly appreciated !
Hi Kwenteen,
Did you get "unknown baseband" after flashing some ROM? If yes, try flashing KitKat ROM first and then see if you get baseband. I'm suspecting the flashing process didn't go well.
This is a known bug with CM12 ROM for ZU go to dial pad and dial *#06# and the Imei will show up if it shows unknown either flash the Modem zip or flash the stock ROM again
sjesudasan said:
Hi Kwenteen,
Did you get "unknown baseband" after flashing some ROM? If yes, try flashing KitKat ROM first and then see if you get baseband. I'm suspecting the flashing process didn't go well.
Click to expand...
Click to collapse
Hello sjesudasan, thanks for your help,
I tried to flash numerous original roms, starting all the way down to 290, which is 4.3, that displayed properly the emei number, but didn't allow me to pass phone calls (sim card detected, ask for pin code, then no service)
And I can't enter any APN.
On top of that, I am now unable to flash anything with xperia flashtool anymore, getting a null error then error flashing. Aborted. when trying to flash any firmware and the device doesn't boot anymore either. I guess the last flash went wrong even if it didn't display any error, but I assumed that as long as I was able to put the phone in flashmode, I would be able to flash anything, and get away from softbrick ?
when trying to fix with Xperia compagnon, I get the error "UEGetPhoneInfoMissingInfo "
Thank you for your suggestion sairaj rane, unfortunately I already tried that, went back to original firmware, I even flashed the modem zip. None of those solution worked for me.
Thank you for your help !
Hello, after 2 weeks of trouble just to get back with a functionning 5.1.1 ROM, I now have an original sony rom fixed by xperia compagnion.
I have the same error, can't get to the network. Phone ask for simcode, I enter it, and then no error, just no connexion to the network.
I have a recognized emei number, but the ICCID says unknown...
Is it normal ?
Thanks for the help anyway !
kwenteen said:
Hello, after 2 weeks of trouble just to get back with a functionning 5.1.1 ROM, I now have an original sony rom fixed by xperia compagnion.
I have the same error, can't get to the network. Phone ask for simcode, I enter it, and then no error, just no connexion to the network.
I have a recognized emei number, but the ICCID says unknown...
Is it normal ?
Thanks for the help anyway !
Click to expand...
Click to collapse
Have you tried the repair function of xperia companion?
itsmeluigi said:
Have you tried the repair function of xperia companion?
Click to expand...
Click to collapse
Unfortunately, yes.
It worked in a way that allowed me to retrieve the phone from a pretty hard brick, in conjunction with the use of the test point method and s1tool …
but even after this awakening from the dead, still no network connection.
Have you checked the six golden Pins inside the Phones SIM Slot? (Hard to see)
Once my phones one was bent. Had to correct them with a fine tool. Sim recognized since then.
kwenteen said:
Unfortunately, yes.
It worked in a way that allowed me to retrieve the phone from a pretty hard brick, in conjunction with the use of the test point method and s1tool …
but even after this awakening from the dead, still no network connection.
Click to expand...
Click to collapse
Thanks itsmeluigi,
I just checked that, dremelled the protective shield to access them, and probed them with a multimeter. No good, everything is fine there !
kwenteen said:
Thanks itsmeluigi,
I just checked that, dremelled the protective shield to access them, and probed them with a multimeter. No good, everything is fine there !
Click to expand...
Click to collapse
Tried to flash with another cable on another Pc with another Firmware download (Source)?
itsmeluigi said:
Tried to flash with another cable on another Pc with another Firmware download (Source)?
Click to expand...
Click to collapse
Yep, done that too...
To be honest, I really don't know what to do.
I don't know if that can be linked, but the phone is also unable to be unlocked, despite the code provided by sony, matching the imei number !
Hello guys, i have a big problem on that device, the version is PLK-L01C10B140
After i put the sim on slot1 or slot2 (also if the device is turned on), the phone ask me to insert pin
until is is ok
so need to reboot (because above the screen i have the signal with a x.
after reboot system know the sim is inside but i cant do nothing
if i try to activate sim not work...and also, when the device reboot, not need to ask me again the pin of the sim??
try a different sim, check the basebands from youre carrier are supported by the phone
i try different sim but not work. can i change the baseband?
When did the problem showed up?
Are your rooted/Xposed? If yes, please try to get the phone fully stocked and test it. I suggest you to flash original firmware.
Not root. Original fw. Also cant find fw for mine version
Benz83 said:
Not root. Original fw. Also cant find fw for mine version
Click to expand...
Click to collapse
I found this:
http://www.hihonor.com/it/support/details/index.html?DOC_ID=91047
It's west European firmware, C432.
Infact i try It but not work. Info the microSD. Extract the file (inside or not inside the dir dload) .
I do not understand..? Can you please explain yourself better?
Which firmware version do you have at the moment?
Well, i think the firmware is PLK-L01C10B140
I try to download zone update.zip ( the Steps usually are copy the file into the phone or microSD in the directory dload). Every time i try to update the phone at 2% give me error. Someone tell me i Need to unlock the booloader
Benz83 said:
Well, i think the firmware is PLK-L01C10B140
I try to download zone update.zip ( the Steps usually are copy the file into the phone or microSD in the directory dload). Every time i try to update the phone at 2% give me error. Someone tell me i Need to unlock the booloader
Click to expand...
Click to collapse
It will not work because the region is different (C10/C432).
For your device, try this one:
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1046/g104/v54152/f1/full/update.zip
seems website not work
Benz83 said:
seems website not work
Click to expand...
Click to collapse
It works for me, try again and check if DNS is correct.
I did It, but is Stuck at 19%. Need to reboot the phone or try to download again
Hi, I've got the same problem, I insert my sim card into the phone, phone ask me Pin code but he doesn't detect mobile network.
i've sent my phone to After Sales Services, they said me for them the only problem on my phone was my Broken screenbut nothing about network, they've repaired my phone and send me back.
I received it yesterday but the problem still the same, I insert my sim and mobile network isn't detected.
During 4/5 months all works great so i'm thinking the problem comes from phone or android firmware.
Build : C432B380
EMUI : 4.0.1
Android 6.0
Could someone help me please ?
Hi everyone I been trying to get the factory firmware installed on my ANE-LX1 and it keeps failing at 71%, I have tried the usb methods as well as the cable methods and nothing seem to bear any fruits for me.
Bootloader unlocked yes
FPR unlocked yes
ulidor said:
Hi everyone I been trying to get the factory firmware installed on my ANE-LX1 and it keeps failing at 71%, I have tried the usb methods as well as the cable methods and nothing seem to bear any fruits for me.
Bootloader unlocked yes
FPR unlocked yes
Click to expand...
Click to collapse
Can you give us more info about your issue?
- Which firmware have you installed?
- Which firmware are you trying?
- Are you sure that firmware is ok for your device?
- Did you try HuRUpdater tool?
Can you give us more info about your issue?
Factory new was ANE-LX1C185
I tried installing C432 however had this issue since I tried installing that version.
I only want to get back to my original condition now.
- Which firmware have you installed? tried C432 which did not work also ended at 75% just trying to get back to C185 but sitting on a strange version now as mentioned in other threads
- Which firmware are you trying? Download from firmwarefinder C185 all three files for single sim I used
- Are you sure that firmware is ok for your device? Yes I am 100% sure I am trying the correct version
- Did you try HuRUpdater tool? I have tried numerous times
I also noted now that oem lock not is not showing anymore in the developer section of the phone. not sure why
ulidor said:
I also noted now that oem lock not is not showing anymore in the developer section of the phone. not sure why
Click to expand...
Click to collapse
When you flashed C432 you should flashed first oeminfo from C432.
Did you backup your oeminfo before you tried install C432 firmware?
unfortunately not. I was not aware that I had too is there away around this for me at all?
I did use the file on HWOTA8
ulidor said:
unfortunately not. I was not aware that I had too is there away around this for me at all?
I did use the file on HWOTA8
Click to expand...
Click to collapse
Check this only to confirm if the oeminfo installation is ok.
In the dial pad:
*#*#2846579#*#*
-- 3.Information Network Query
- - -4.Vendor Country Info
- - - - Vendor: hw
- -- - - Country: eu
Do you see hw and eu?
Yes I see both
[/attach]
The screen shots are after I tried flashing c432 again
ulidor said:
The screen shots are after I tried flashing c432 again
Click to expand...
Click to collapse
You are with C432 (hw/eu) oeminfo, so the C432 full firmware should be installed without issues and C185 should give you an error when you try it
Did you take oeminfo from HwOTA8? https://forum.xda-developers.com/huawei-p20-lite/development/hwota8-huawei-p20-lite-t3787787
Your phone is single SIM or dual SIM?
Which method are you using to install C432 firmware?
Do you want stay with C432 or do you prefer go back to C185?
Yes used HwOTA8 for oeminfo (FYI my phone was stock with C185 )
New it was Single sim, tried to get to dual sim.
I used both HwOTA8 as well as the SD card method with HuRUpdater
I am happy to stay with C432 if I can get ota updates as per a normal phone. Currently the phone is showing dual sim however my imei is 000000000000000 , and suspect the carriers in South Africa are blocking the second sim from working so therefore I dont have any use for the dual sim on this phone Unless I can unlock the correct IMEI for the second sim? and have it working with ota updates it would be prize number 1.
ulidor said:
Yes used HwOTA8 for oeminfo (FYI my phone was stock with C185 )
New it was Single sim, tried to get to dual sim.
I used both HwOTA8 as well as the SD card method with HuRUpdater
I am happy to stay with C432 if I can get ota updates as per a normal phone. Currently the phone is showing dual sim however my imei is 000000000000000 , and suspect the carriers in South Africa are blocking the second sim from working so therefore I dont have any use for the dual sim on this phone Unless I can unlock the correct IMEI for the second sim?
Click to expand...
Click to collapse
As far as I know second SIM got IMEI null after rebrand from single to dual.
When you install C432 firmware with HuRUpdater it run to the end of process?
Do you see your build number in the settings show as correct one like in the pic enclosed?
It runs to 71% or 75% when verification starts is stops and says update failed and gives reboot option
When I try re-brand region I dont get a country option in HwOTA8 , would this affect it?
ulidor said:
When I try re-brand region I dont get a country option in HwOTA8 , would this affect it?
Click to expand...
Click to collapse
Not sure, but I have something in mind that is causing this issue, please check this path in the "Version" partition:
/version/special_cust/ANE-L21/hw/eu
Also if exist the folders cust_comm, cust_spec, hw_odm and hw_oem in the root of device
Check pics enclosed.
I assume I need root?
via twr nothing under version, nothing under root folder via twr
ok I managed to get into C432. I did the script and then sd card installation however i did not wipe after the install. seem to be fixed now. thank for your help and time mate.
Hi, i finally success rebranding.
P20 lite Demo ANE-LX1-8.0.0.(C185) (fastboot getvar vendorcountry --> hw/demo ) single SIM
to
P20 lite Europe ANE-LX1-8.0.0.136(C432) (fastboot getvar vendorcountry --> hw/eu ) Dual SIM (both of sim cards works but the imei of the second one is 0000000000)
1st. there is no need to repack the files go directly to option 2
- put your phone in fastboot mode with state phone unlocked and frp unlocked.
- choose option 2 press enter
- if everything is ok you should see that twrp is installed.
- Remove usb cable from computer and reboot holding power button + Volume up
- You should now boot on Twrp, connect the phone using usb cable
-You should see too options choose one for rebranding then choose your country and press enter
-it will copy new oeminfo to device then reboot
- now you will have system rebranded but in some case like mine if you go to system info you will see in build version something like that ( system.8.0.0(OSAV) ).
if you have this you cannot update your device anymore you have to install the correct firmware you choose for region.
to solve this problem.
- go to Firmware Finder and download FullOTA of your firmware (in my case i choose ANE-LX18.0.0.136(C432) FullOTA
-Download HuRUpdater_0.3.zip
-copy the HuRUpdater_0.3.zip file on sdcard in new folder no matter the name .
-Rename downloaded files as above:
update.zip not rename
update_full_ANE-L01_hw_eu.zip to update_all_hw.zip single SIM
update_full_ANE-L21_hw_eu.zip to update_all_hw.zip Dual SIM ( i used this in my case)
update_data_full_public.zip to update_data_public.zip
-copy renamed files in sdcard same folder as Hurupdater_03.zip
-Reboot the phone in Twrp mode
- Go to install and select hurupdater_03.zip and install it .
- Confirm installation by pressing Volume down. Do not do a wipe!
Hope this will help somebody.
Weird fact in all this.
Bought new as C185 Single sim.
I am only able to flash the C432 Dual, The C432 single, C185 Single and C185 Dual dont pick up.
Hi guys,
I have Pocophone f1 Global version (M1805E10A) 6gb RAM 64gb storage). I had a problem about IMEI and tried to fix it. Finally i fixed it, but now when i insert the sim card, phone recognises the sim card, asks me pin code. No problem till here. After entering pin code, phone unlocks but there is no service all the time. When i try to make a call it says "Turn off airplane mode to make a call." and "RADIO OFF" in the screen, as i marked in the photo.
In the Hardware Test section (*#4636#*#*) yes detect.
What i did for fixing;
1. Flashed china developer rom; did not work,
2. Flashed global developer rom; did not work,
3. Flashed NON-HLOS.bin file from gobal developer rom via fastboot adb; did not work,
4. Flashed gobal stable rom; did not work,
5. Flashed NON-HLOS.bin file from gobal stable rom via fastboot adb; did not work,
6. Tried to flashed .qcn file from another Redmi Note 4 Global version but get an error on this and could ot do this,
7. Flashed RR rom by TWTP, clean flash; didn't work,
8. Flashed latest developer rom from xiaomi.eu; didn't work.
I show about phone section for my phone at the picture too. I have bootloader unlocked, no root access for now (i had before and can get easly)
Please help...
I can't upload photos because I'm a beginner
Thanks
E-MAIL: [email protected]
wesleyned said:
Hi guys,
I have Pocophone f1 Global version (M1805E10A) 6gb RAM 64gb storage). I had a problem about IMEI and tried to fix it. Finally i fixed it, but now when i insert the sim card, phone recognises the sim card, asks me pin code. No problem till here. After entering pin code, phone unlocks but there is no service all the time. When i try to make a call it says "Turn off airplane mode to make a call." and "RADIO OFF" in the screen, as i marked in the photo.
In the Hardware Test section (*#4636#*#*) yes detect.
What i did for fixing;
1. Flashed china developer rom; did not work,
2. Flashed global developer rom; did not work,
3. Flashed NON-HLOS.bin file from gobal developer rom via fastboot adb; did not work,
4. Flashed gobal stable rom; did not work,
5. Flashed NON-HLOS.bin file from gobal stable rom via fastboot adb; did not work,
6. Tried to flashed .qcn file from another Redmi Note 4 Global version but get an error on this and could ot do this,
7. Flashed RR rom by TWTP, clean flash; didn't work,
8. Flashed latest developer rom from xiaomi.eu; didn't work.
I show about phone section for my phone at the picture too. I have bootloader unlocked, no root access for now (i had before and can get easly)
Please help...
I can't upload photos because I'm a beginner
Thanks
E-MAIL: [email protected]
Click to expand...
Click to collapse
I have same problem what you have right now and it has been over 6 months where still can't find a fix, unfortunately no one , if you fix the problem, plz inform me too. My email: [email protected], good luck bro
Heamnath said:
I have same problem what you have right now and it has been over 6 months where still can't find a fix, unfortunately no one , if you fix the problem, plz inform me too. My email: [email protected], good luck bro
Click to expand...
Click to collapse
i also have the same problem.its a hardware issue..the radio module is damaged which comes pre attatched with the main board.i visited service center they told i had to replace mainboard which cost around 11k.better buy a new phone instead.but the phone is working absolutely fine only the signal is not coming.
I also have similar problem. Constant wifi and mobile service droping. On MIUI 11 and Lineage 17.1(custom rom not helped). Maybe someone will answer on this problem?
Hi there,
May be you already did this. But out of curiosity wants you to know that you can try this if not yet done. May be your phone network come back Alive.
Go to settings > my device > all specs > internal storage
Click on this for couple of times 3 to 4 times.. then you will be entering phone information.
Select phone information 1 and turn on mobile radio power button there. Like wise for the other sim. May be it's turned off there and is the reason for the problem.
I am sorry if it didn't help. Anyway keep trying until you succeed is the secret. Thanks
Cheers
sssyraj
wesleyned said:
Hi guys,
I have Pocophone f1 Global version (M1805E10A) 6gb RAM 64gb storage). I had a problem about IMEI and tried to fix it. Finally i fixed it, but now when i insert the sim card, phone recognises the sim card, asks me pin code. No problem till here. After entering pin code, phone unlocks but there is no service all the time. When i try to make a call it says "Turn off airplane mode to make a call." and "RADIO OFF" in the screen, as i marked in the photo.
In the Hardware Test section (*#4636#*#*) yes detect.
What i did for fixing;
1. Flashed china developer rom; did not work,
2. Flashed global developer rom; did not work,
3. Flashed NON-HLOS.bin file from gobal developer rom via fastboot adb; did not work,
4. Flashed gobal stable rom; did not work,
5. Flashed NON-HLOS.bin file from gobal stable rom via fastboot adb; did not work,
6. Tried to flashed .qcn file from another Redmi Note 4 Global version but get an error on this and could ot do this,
7. Flashed RR rom by TWTP, clean flash; didn't work,
8. Flashed latest developer rom from xiaomi.eu; didn't work.
I show about phone section for my phone at the picture too. I have bootloader unlocked, no root access for now (i had before and can get easly)
Please help...
I can't upload photos because I'm a beginner
Thanks
E-MAIL: [email protected]
Click to expand...
Click to collapse
How he managed to repair the imei. I haven't found a solution yet. Help me please.
Hi to everyone..Had the same problem, phone was wet previously. Took it to service (not Xiaomi's). They changed the charging port and told me that the radio is on the same component. After the change signal is like before, everything working great. Hope this helps someone..
dreamdrake said:
Hi to everyone..Had the same problem, phone was wet previously. Took it to service (not Xiaomi's). They changed the charging port and told me that the radio is on the same component. After the change signal is like before, everything working great. Hope this helps someone..
Click to expand...
Click to collapse
Hi, my wifi and bluetooth work, replacement usb charging board is next to nothing, is this all service replaced?
hecatae said:
Hi, my wifi and bluetooth work, replacement usb charging board is next to nothing, is this all service replaced?
Click to expand...
Click to collapse
Yes, but it lasted just ten days..Then burned a capacitor on the motherboard and phone was dead.
dreamdrake said:
Yes, but it lasted just ten days..Then burned a capacitor on the motherboard and phone was dead.
Click to expand...
Click to collapse
And this is why I may just give up on my f1, after replacing the volume buttons I just do not trust the handset anymore.