I have to write a Tutorial to Downgrade from MiUi 8 7.3.3.0
I am a Service Technician . One day Customer brought Mi5 to me to bypass MI account Lock.
he factory data reset device and forgot mi account password. I thought solution is easy.
Here is Solution
boot device to EDL mode ,
Bypass account Verification with BST Dongle ,
Local Data Restore with other account backup file
All done......
But , In this device , Miui Version is 7.3.3.0 ( Android 7.0 )
I have a crisis , I can not boot this device to EDL mode . if device is in bootloader unlock state , I can erase aboot partition from fastboot and device will still at QDLoader 9008 mode. Now device is in bootloader locked.
so I decided to use Hardware Test Point to boot EDL Mode . Open Backcover , remove battery connector and reconnect it , short Two Test points and connect device to PC . Device connected in 9008 mode [ if device not detect please check driver ] . Now Flash Firmware Via Mi Flasher. boot device normally and bypass
The message what I wanna to pay is Android 7.0 disable boot to EDL Mode from ADB command , fastboot command and EDL boot cable methods. If you wanna to Downgrade with bootloader locked state , please use Test points.
How to disassemble Xiaomi Mi5
https://www.youtube.com/watch?v=RJysUCuBYgo
What is EDL boot Cable ?
http://xiaomitips.com/guide/miui-deep-flash-engineering-cable-solution-to-non-edl-device/
How to Flash Firmware from QDLoader 9008 mode
https://forum.xda-developers.com/mi-5/how-to/guide-t3449859
Phyo Nyi Nyi said:
I have to write a Tutorial to Downgrade from MiUi 8 7.3.3.0
I am a Service Technician . One day Customer brought Mi5 to me to bypass MI account Lock.
he factory data reset device and forgot mi account password. I thought solution is easy.
Here is Solution
boot device to EDL mode ,
Bypass account Verification with BST Dongle ,
Local Data Restore with other account backup file
All done......
But , In this device , Miui Version is 7.3.3.0 ( Android 7.0 )
I have a crisis , I can not boot this device to EDL mode . if device is in bootloader unlock state , I can erase aboot partition from fastboot and device will still at QDLoader 9008 mode. Now device is in bootloader locked.
so I decided to use Hardware Test Point to boot EDL Mode . Open Backcover , remove battery connector and reconnect it , short Two Test points and connect device to PC . Device connected in 9008 mode [ if device not detect please check driver ] . Now Flash Firmware Via Mi Flasher. boot device normally and bypass
The message what I wanna to pay is Android 7.0 disable boot to EDL Mode from ADB command , fastboot command and EDL boot cable methods. If you wanna to Downgrade with bootloader locked state , please use Test points.
How to disassemble Xiaomi Mi5
What is EDL boot Cable ?
http://xiaomitips.com/guide/miui-deep-flash-engineering-cable-solution-to-non-edl-device/
How to Flash Firmware from QDLoader 9008 mode
https://forum.xda-developers.com/mi-5/how-to/guide-t3449859
Click to expand...
Click to collapse
Did you make it?
Mi wifi and bluetooth are NOT working!
I try to put the wifi on and the buttonn just returns to his position, same thing occurs with the bluetooth... Why is this? Is this the antenna that is break or maybe something about the software...?? I have the latest Golbal verison 8.2.2.0
Hi
I need help
My phone is realme gt 5g snap 888 5G.
I need install firmware to phone but my phone boot only fastboot.
I connect to pc only to fastboot mode i dont connect to pc to EDL mode because when i start install firmware (EDL mode) my phone every time restart.
I have the same issue can't access bootloader because I relocked and installed magisk before that which made my device restart every time non stop can't access anything I need help
Kopasz999 said:
Hi
I need help
My phone is realme gt 5g snap 888 5G.
I need install firmware to phone but my phone boot only fastboot.
I connect to pc only to fastboot mode i dont connect to pc to EDL mode because when i start install firmware (EDL mode) my phone every time restart.
Click to expand...
Click to collapse
The same problem! Please help us!
hi, i recently tried flashing the stock rom for rosemare_redmi note 10s) But after the flash it wont turn on, blank screen, no recovery, no fastboot only brom mode is left, so i was wondering if there is a way to unbrick it.
I am facing the same problem. No fastboot, no recover, only a redmi log and repeat.
I do not know what to do. If you found the solution, please share
NikolaTechGuy said:
hi, i recently tried flashing the stock rom for rosemare_redmi note 10s) But after the flash it wont turn on, blank screen, no recovery, no fastboot only brom mode is left, so i was wondering if there is a way to unbrick it.
Click to expand...
Click to collapse
tutorial to fix your device
Redmi Note 10S - Flashing with SP Flash Tool in BROM mode.
Required Softwares [DOWNLOAD LINK] 1. MTK Drivers 2. LIB USB FILTER 3. MTK Auth Bypass Utility V43 or use Android Utility V109 if MTK Auth Bypass Utility shows expired. 4. SP Flash Tool 5. Stock Firmware STEPS: Install MTK USB Drivers and...
forum.xda-developers.com
NikolaTechGuy said:
hi, i recently tried flashing the stock rom for rosemare_redmi note 10s) But after the flash it wont turn on, blank screen, no recovery, no fastboot only brom mode is left, so i was wondering if there is a way to unbrick it.
Click to expand...
Click to collapse
Redmi Note 10S - Flashing with SP Flash Tool in BROM mode.
Required Softwares [DOWNLOAD LINK] 1. MTK Drivers 2. LIB USB FILTER 3. MTK Auth Bypass Utility V43 or use Android Utility V109 if MTK Auth Bypass Utility shows expired. 4. SP Flash Tool 5. Stock Firmware STEPS: Install MTK USB Drivers and...
forum.xda-developers.com
Hi guys sadly I completely softbricked my motorola X40 phone i'm a idiot.
I flashed to a wrong firmware file (edge 30 pro) and re-locked bootloader then found it phone doesn't properly boot anymore.
I can boot it in fastboot mode but flashing in normal fastboot mode doesn't work with locked bootloader and lenovo rescue tool can't help me either.
Edit: Weirdly I managed to boot it up and it shows as a "motorola edge 30 pro" and I can control my screen with a USB mouse.
But when I try to enable "OEM unlocking" in developer options the settings app just crashes.
But my problem stays the same, i'm still stuck with a locked bootloader
Is there any chance to trick this phone into EDL mode or any working blankflash?
Any suggestions? i'd appreciate it
jody2k said:
Hi guys sadly I completely softbricked my motorola X40 phone i'm a idiot.
I flashed to a wrong firmware file (edge 30 pro) and re-locked bootloader then found it phone doesn't properly boot anymore.
I can boot it in fastboot mode but flashing in normal fastboot mode doesn't work with locked bootloader and lenovo rescue tool can't help me either.
Edit: Weirdly I managed to boot it up and it shows as a "motorola edge 30 pro" and I can control my screen with a USB mouse.
But when I try to enable "OEM unlocking" in developer options the settings app just crashes.
But my problem stays the same, i'm still stuck with a locked bootloader
Is there any chance to trick this phone into EDL mode or any working blankflash?
Any suggestions? i'd appreciate it
Click to expand...
Click to collapse
It doesn't matter if the oem lock is on to flash the stock firmware.
You can directly flash the right firmware via fastboot. Lenovo rescue tool may not flash...
cascade128 said:
It doesn't matter if the oem lock is on to flash the stock firmware.
You can directly flash the right firmware via fastboot. Lenovo rescue tool may not flash...
Click to expand...
Click to collapse
Hi thanks for the response, how to flash directly stock firmware? which method should I use? This is what I get when I try to flash anything through adb (phone in fastboot mode) I added a screenshot from adb in windows and took a picture from my phone to show in which fastboot mode it shows.
Tried several things flashing directly from adb but it always says permission denied because of the bootloader lock, maybe i'm doing something wrong.
It's not adb, it's fastboot mode.
Where you are is right.
It will be in the mode in the screenshot of the device, that's right.
Use the one in the file i gave you.
Here are the guidelines.
01. Download the latest Firmware from lolinet
02. We extract the firmware.zip, open servicefile.xml and copy the contents into this website
03. Download the mfastboot.rar ADB i gave and put it in the rom folder you extracted.
04. We put the flashfile.bat we created (Step 02. Extract, open servicefile.xml and copy the content to this site) into the rom folder you extracted.
05. Reboot your phone into fastboot (adb reboot fastboot or press and hold Power + Volume Down)
06. Everything is ready, click on the ''flashfile.bat'' file.
07. Don't disconnect the phone until the update has finished.
cascade128 said:
It's not adb, it's fastboot mode.
Where you are is right.
It will be in the mode in the screenshot of the device, that's right.
Use the one in the file i gave you.
Here are the guidelines.
01. Download the latest Firmware from lolinet
02. We extract the firmware.zip, open servicefile.xml and copy the contents into this website
03. Download the mfastboot.rar ADB i gave and put it in the rom folder you extracted.
04. We put the flashfile.bat we created (Step 02. Extract, open servicefile.xml and copy the content to this site) into the rom folder you extracted.
05. Reboot your phone into fastboot (adb reboot fastboot or press and hold Power + Volume Down)
06. Everything is ready, click on the ''flashfile.bat'' file.
07. Don't disconnect the phone until the update has finished.
Click to expand...
Click to collapse
Hi thanks for helping me, I downloaded the right firmware, uploaded the servicefile.xml to the site you gave me and created the flashfile.bat. Pasted the flashfile.bat into the samen folder as the rom and also extracted the mfastboot.rar into the same rom folder.
Then clicked on the flashfile.bat but sadly I get the same error's (Permission Denied)
My phone is still in fastboot mode (right screenshot)
Any idea's?
jody2k said:
Hi thanks for helping me, I downloaded the right firmware, uploaded the servicefile.xml to the site you gave me and created the flashfile.bat. Pasted the flashfile.bat into the samen folder as the rom and also extracted the mfastboot.rar into the same rom folder.
Then clicked on the flashfile.bat but sadly I get the same error's (Permission Denied)
My phone is still in fastboot mode (right screenshot)
Any idea's?
Click to expand...
Click to collapse
Very interesting, it shouldn't give such an error. You are flashing Motorola signed images, you don't need the bootloader unlocked for this Sorry i can't be of more help, i hope you can recover your device...
cascade128 said:
Very interesting, it shouldn't give such an error. You are flashing Motorola signed images, you don't need the bootloader unlocked for this Sorry i can't be of more help, i hope you can recover your device...
Click to expand...
Click to collapse
Yea indeed well thanks anyway, my only hope left is a third party recovery tool that supports this phone in future.
I'll put the X40 in my closet until then and buy another new phone in the meanwhile don't have much of a choice lol.
Hello!
Did you try RSDLite tool to flash firmware?
thunderman75 said:
Hello!
Did you try RSDLite tool to flash firmware?
Click to expand...
Click to collapse
I tried but the issue is there that it doesn't detect the port / device on the RSDlite tool.
Meanwhile I can see in devicemanager in windows the phone is detected in ADB/fastboot mode but RSDlite tool needs some portmode to succeed, the tool says it doesn't detect my device. I can't seem to connect it with that port RSDlite tool needs, also tried general ADB drivers but didn't help either. I also saw in one topic to make it work with RSD tool you need to install the qualcomm drivers, but these drivers don't work with this phone in normal fastboot mode. In other words I can't seem to RSD tool recognise my phone on the needed port. I think this tool only works in EDL mode (+qualcomm driver) but my moto X40 doesn't yet support EDL mode I think.
https://androidmtk.com/use-rsd-lite-tool
=> I followwed this tutorial but @ Step nr.8 there isn't any port or device detected even when my phone is correctly in fastboot mode
I tried Generic ADB drivers and the official motorola USB drivers, both detected in devicemanager in windows but RSDtool lite didn't detect my phone.
jody2k said:
I tried but the issue is there that it doesn't detect the port / device on the RSDlite tool.
Meanwhile I can see in devicemanager in windows the phone is detected in ADB/fastboot mode but RSDlite tool needs some portmode to succeed, the tool says it doesn't detect my device. I can't seem to connect it with that port RSDlite tool needs, also tried general ADB drivers but didn't help either. I also saw in one topic to make it work with RSD tool you need to install the qualcomm drivers, but these drivers don't work fastboot mode. In other words I can't seem to RSD tool recognise my phone on the needed port. I think this tool only works in EDL mode (+qualcomm driver) but my moto X40 doesn't yet support EDL mode I think.
https://androidmtk.com/use-rsd-lite-tool
=> I followwed this tutorial but @ Step nr.8 there isn't any port or device detected even when my phone is correctly in fastboot mode
I tried Generic ADB drivers and the official motorola USB drivers, both detected in devicemanager in windows but RSDtool lite didn't detect my phone.
Click to expand...
Click to collapse
This looks promising:
Motorola Unbrick Tool: Unbrick any Moto Device via EDL Mode
In this comprehensive guide, we will show you the detailed steps to unbrick any Motorola device booted to EDL Mode using the Unbrick Tool.
droidwin.com
thunderman75 said:
This looks promising:
Motorola Unbrick Tool: Unbrick any Moto Device via EDL Mode
In this comprehensive guide, we will show you the detailed steps to unbrick any Motorola device booted to EDL Mode using the Unbrick Tool.
droidwin.com
Click to expand...
Click to collapse
Yeah let's hope my device model (X40) get's support soon
@mark332 Any idea's?
I have the same problem, because I did the same thing hahaha, I tried these methods and nothing was successful, I tried to use Lenovo's RSA, but it only installs the correct firmware and Fastboot, but when it comes to rescuing it just has a "Warning" message.
zequinhaBR said:
I have the same problem, because I did the same thing hahaha, I tried these methods and nothing was successful, I tried to use Lenovo's RSA, but it only installs the correct firmware and Fastboot, but when it comes to rescuing it just has a "Warning" message.View attachment 5872305
Click to expand...
Click to collapse
Guess we are in the same boat loll xp having indeed the exact same message. I think the RSA tool detects the right device but it checks for some sort of keys/verification and sees it isn't the right firmware so it stops flashing.
I have found out you can also enter recovery mode by selecting "recovery" in fastboot mode with the key buttons.
Then you need to press power button + down key for 3 seconds, then short the volume up key.
Youll get a other menu with also fastboot mode and adb sideload etc...
but again sadly neither fastboot or adb sideload did work for me
When I tried to flash the original firmware in sideload mode trough ADB it gives a"verification error"
In fastboot mode it says that it can't flash with locked device
I hope this info will be any useful for people stumble upon this topic in the future and maybe help to unbrick this phone.
jody2k said:
I tried but the issue is there that it doesn't detect the port / device on the RSDlite tool.
Meanwhile I can see in devicemanager in windows the phone is detected in ADB/fastboot mode but RSDlite tool needs some portmode to succeed, the tool says it doesn't detect my device. I can't seem to connect it with that port RSDlite tool needs, also tried general ADB drivers but didn't help either. I also saw in one topic to make it work with RSD tool you need to install the qualcomm drivers, but these drivers don't work with this phone in normal fastboot mode. In other words I can't seem to RSD tool recognise my phone on the needed port. I think this tool only works in EDL mode (+qualcomm driver) but my moto X40 doesn't yet support EDL mode I think.
https://androidmtk.com/use-rsd-lite-tool
=> I followwed this tutorial but @ Step nr.8 there isn't any port or device detected even when my phone is correctly in fastboot mode
I tried Generic ADB drivers and the official motorola USB drivers, both detected in devicemanager in windows but RSDtool lite didn't detect my phone.
Click to expand...
Click to collapse
New hope on horizont for your phone...Machine with Windows10(32-bit) and Moto USB drivers(32-bit).
Phone booted in fastboot mode and connected to PC,recognized instantly.
Screenshot of my Moto Edge 30 ultra connected to above mentioned PC.
Good luck!!!
thunderman75 said:
New hope on horizont for your phone...Machine with Windows10(32-bit) and Moto USB drivers(32-bit).
Phone booted in fastboot mode and connected to PC,recognized instantly.
Screenshot of my Moto Edge 30 ultra connected to above mentioned PC.
Good luck!!!
Click to expand...
Click to collapse
Hey man thanks for your response, sadly i'm on a 64bit windows 11 version. Would it be any different than the 64bit driver vs 32bit you think? Because have tried this several times can't get RSD lite detect my phone . In device manager it's detected first as "fastboot rtwo s" and when the moto 64bit driver is installed it's detected as "motorola ADB interface" so it's correctly detect by the system.
My phone is also in fastboot mode never the less RSD lite tool doesn't detect anything
Guess I could try to install windows 10 32bit i'll keep this updated
jody2k said:
Hey man thanks for your response, sadly i'm on a 64bit windows 11 version. Would it be any different than the 64bit driver from motorola you think? Because have tried this several times can't get RSD lite detect my phone . In device manager it's detected first as "fastboot rtwo s" and when the moto 64bit driver is installed it's detected as "motorola ADB interface" so it's correctly detect by the system.
Never the less RSD lite tool doesn't detect anything
On which mode is your edge 30 phone, fastboot or edl?
Click to expand...
Click to collapse
I also have 64 bit Win11 machine with RSD Lite installed and it can't detect phone.
But when I connect it to my old laptop(Win10-32 bit,RSD Lite) phone is detected instantly.
Try to find someone who has machine with 32 bit Windows and try to rescue your phone.
Tip from professionals: RSD Lite works best with older version of a 32 bit Windows...
thunderman75 said:
I also have 64 bit Win11 machine with RSD Lite installed and it can't detect phone.
But when I connect it to my old laptop(Win10-32 bit,RSD Lite) phone is detected instantly.
Try to find someone who has machine with 32 bit Windows and try to rescue your phone.
Tip from professionals: RSD Lite works best with older version of a 32 bit Windows...
Click to expand...
Click to collapse
Just tried on my older 32bit computer with windows 10 and installed the 32bit driver for motorola. Sadly the issue is the same, RSD lite doesn't detect the moto x40. Where did you download the driver?
Motorola USB Driver for Windows 32-Bit/64-Bit - Driver Market
Download now the latest and official Motorola USB Driver for Windows. We shared the latest Motorola USB Driver for Windows.
www.drivermarket.net
Reinstall driver and restart PC(mandatory),it should work then.
thunderman75 said:
Motorola USB Driver for Windows 32-Bit/64-Bit - Driver Market
Download now the latest and official Motorola USB Driver for Windows. We shared the latest Motorola USB Driver for Windows.
www.drivermarket.net
Reinstall driver and restart PC(mandatory),it should work then.
Click to expand...
Click to collapse
Tried that too several times but thanks for the suggestion anyways.
Took my time also this evening to reinstall a clean windows 32bit version, installed 32bit moto driver again from your link.
Reboot, nope
Same issue, RSD lite doesn't detect anything while the driver and device is recognized in device manager whatever I tried last 2 weeks.
I also opened the phone and searched on the motherboard for EDL test points, no avail too.
I think the RSD tool lite or the usb driver needs a update for this device or someone needs to find out how to get this phone into EDL mode. This can take months maybe years who knows lol
I just gave up and bought myself a new phone (xiaomi 13)