All Beware!!
ATT released new firmware - G930AUCUACSF1 and apparently the bootloader was updated, again.
Now the BL# is A (or 0xA) = 10 in Hexadecimal.
I took the update and now I cannot use V9 Engineering kernel to root... should have paid more attention.
Also, cannot switch to G930U firmware since that newest version stops at V9 bootloader.
Apparently Sprint has also jumped to that version, but Tmobile & Verizon haven't yet as of 07/08/19.
Thanks all.
Need firmware for samsung s7 edge att. I can not get out of the download. need exactly this G935AUCUACSF1
support.halabtech.com has it, but you need to pay for a download package (I believe minimum $19) to get it.
good luck, let us know how it goes.
I do not trust this site - support.halabtech.com , I do not intend to check through it. I installed the version with the latest bootloader from verizon and everything worked fine. took from this site https://samfrew.com/
that is, it comes with the analog loader G935VVRUACSF2
goob
good
alexey777999 said:
I do not trust this site - support.halabtech.com , I do not intend to check through it. I installed the version with the latest bootloader from verizon and everything worked fine. took from this site https://samfrew.com/
that is, it comes with the analog loader G935VVRUACSF2
Click to expand...
Click to collapse
glad you fixed yours.
I needed CP (modem) because I flashed V9 from G930U and tripped a "ATT security" flag, so phone wouldn't boot.
I downloaded V10 from halabtech and all is well... no funny business there
Related
Will my previously locked AT&T Streak, which is now unlocked (not rooted), still receive the OTA update to 2.2 Froyo?
as far as i know you should still get the update because i believe when you click update within system settings .all the dell servers do is verify your base band version . and even if you are on tmobile you should get the update because you could do it over wifi (which is faster sometimes). The question is when will att finally go ota. I couldn't wait so i used qdl
demonchild1786 said:
as far as i know you should still get the update because i believe when you click update within system settings .all the dell servers do is verify your base band version . and even if you are on tmobile you should get the update because you could do it over wifi (which is faster sometimes). The question is when will att finally go ota. I couldn't wait so i used qdl
Click to expand...
Click to collapse
I don't believe that's accurate information as far as if your with t-mobile that you will still get the update. The OTA update was pretty much left to At&t to manage and control according to dell reps.
Guess I should have put in my original post that I'm still using AT&T...
Sounds like I'm good to go, thanks for the replys. Now we shall see if the reports are correct that they will roll out the update tomorrow
i have a Verizon s4 . its unlocked. i am using it in india . i cant find any lollipop firmware without Verizon carrier . how do i upgrade my device to 5.0 ?
I'm guessing you want t update to lolipop but can't because Verizon isn't in India? There's Muniz's rooted stock OF1 in the general section.
bangdosa said:
I'm guessing you want t update to lolipop but can't because Verizon isn't in India? There's Muniz's rooted stock OF1 in the general section.
Click to expand...
Click to collapse
thank you for your help i am new to flashing . can you give me link please . i don't know what is munzi or of1 . . can i flash it with Odin ? is it safe like original roms?
are you rooted? If not could you tell me which build number your phone is currently at?
As for Muniz, he's a guy who works on rooting our galaxy s4 =)
the latest build for verizon galaxy s4 ends in OF1. it is Android Lolipop, 5.0.1
his instructions are here.
you'll need root to follow the directions.
bangdosa said:
are you rooted? If not could you tell me which build number your phone is currently at?
As for Muniz, he's a guy who works on rooting our galaxy s4 =)
the latest build for verizon galaxy s4 ends in OF1. it is Android Lolipop, 5.0.1
his instructions are here.
you'll need root to follow the directions.
Click to expand...
Click to collapse
from the looks of things , this looks risky . i would rather have a unbricked s4 without lollipop thanks for your help. is it possible to root s4 with iroot ?
It's not really that risky.
best way to root kitkat Verizon galaxy s4 is to use towelroot with NC5 build kernal
Verizon's Galaxy s4 is supposed to be unlocked by default, its just rooting is an option just in case you dont like the look of the s4's lolipop. if you want just complete current stock lolipop build OF1 you can download it here and use ODIN to flash, or just use Samsung kies software.
just so you know if you use the sammobile method or kies method to update to lolipop, you cannot go back down to kitkat. Muniz's method with root allows you to return to kitkat builds if you so desire.
by the way what happens when we flash a rom with carrier to a unlocked phone ?
bangdosa said:
It's not really that risky.
best way to root kitkat Verizon galaxy s4 is to use towelroot with NC5 build kernal
Verizon's Galaxy s4 is supposed to be unlocked by default, its just rooting is an option just in case you dont like the look of the s4's lolipop. if you want just complete current stock lolipop build OF1 you can download it here and use ODIN to flash, or just use Samsung kies software.
just so you know if you use the sammobile method or kies method to update to lolipop, you cannot go back down to kitkat. Muniz's method with root allows you to return to kitkat builds if you so desire.
Click to expand...
Click to collapse
wait a minute . the link you just send me . . isn't it a rom with Verizon carrier . my phone will remain unlocked if i flash it ?????
You do realize that Verizon phones are supposed to be GSM unlocked by default due to some agreement with FCC for their bands?
From here
Unlocking a Verizon phone
Even though Verizon uses CDMA instead of GSM, most of Big Red’s devices come with an unlocked SIM card slot. According to Verizon, its 4G LTE devices aren’t locked and, if you want to bring one of them to another carrier, there is no code needed to program the phone to play nice with it.
However, even though SIM-equipped Verizon phones can be used on AT&T, T-Mobile, or other GSM carriers, the phone will need to have roaming GSM radios in order to make phone calls and send texts in the United States. While most recent Verizon handsets will work just fine on American GSM bands, your mileage will vary when it comes to LTE support.
Even though Verizon doesn’t have an online unlock request, you can call 1-800-711-8300 and request a SIM unlock.
Read more: http://www.digitaltrends.com/mobile/phone-unlocking-guide-for-all-carriers/#ixzz3nah3dHaY
Follow us: @digitaltrends on Twitter | digitaltrendsftw on Facebook
Click to expand...
Click to collapse
bangdosa said:
You do realize that Verizon phones are supposed to be GSM unlocked by default due to some agreement with FCC for their bands?
Click to expand...
Click to collapse
sorry for my lack of knowledge . i didn't know that . i bought it from my friend . i thought it was locked by verizon and he got it unlocked for Indian sims .
well, then the choice is yours, you can root your phone and use muniz's method to allow you the option of going back to kitkat if you desire, or just use normal methods like samsung kies to update normally, which will lock the bootloader so you can't downgrade.
As for me, I'm going to(try to) sleep. 3 AM here X(
ahsanali32 said:
sorry for my lack of knowledge . i didn't know that . i bought it from my friend . i thought it was locked by verizon and he got it unlocked for Indian sims .
Click to expand...
Click to collapse
thanks buddy you were very helpful . my last question what happens when we flash a rom with carrier to an unlocked phone .
bangdosa said:
well, then the choice is yours, you can root your phone and use muniz's method to allow you the option of going back to kitkat if you desire, or just use normal methods like samsung kies to update normally, which will lock the bootloader so you can't downgrade.
As for me, I'm going to(try to) sleep. 3 AM here X(
Click to expand...
Click to collapse
thanks buddy you were very helpful . my last question what happens when we flash a rom with carrier to an unlocked phone .
well... if it was one of those international versions of the galaxy s4 like the GT-I9500, then you'd probably brick it by flashing a rom for a carrier version like the SCH-i545. or at the very least softbrick it.
I think unlocking phones is something more hard coded than the rom itself. cause, even if for example you have a att phone unlocked, it still has a att rom, and should be able to update the rom while using an att sim
though in your case, I have a feeling whoever "unlocked" your phone never bothered anything other than change the APN settings to that of whatever Indian carrier you were using.
your phone shoulnt have any problems with flashing an update via kies.
check your build number under settings> more> about phone. if they match any of the PDA here, you're on stock. using network signal info app in the play store can also tell you the build number (build ID) and bootloader.
though if your phone doesn't say "custom" when you boot it from power'ed off, that you're probably on a stock rom with no root
This is for T-Mobile version Oreo
Must have latest Oreo firmware installed.
Flash in recovery with latest twrp.
Changes=bootanimation added multi user and edge launcher.
Rooted with superSu and comes with busybox.
May be some more I forgot.
Bugs=none that I've found.
This is just the beginning others are in works to make more custom roms so enjoy this till they upload.
Link to rom
https://drive.google.com/file/d/1di1SFj91bPtKpOTPn0DneHjDj7NKZv-o/view?usp=drivesdk
New version will be updated soon with link to download.
New version is based off # 215.531.21
Good morning. Is this the latest update? I installed this Tom before and recently I've been receiving update notifications.
mcarden2006 said:
Good morning. Is this the latest update? I installed this Tom before and recently I've been receiving update notifications.
Click to expand...
Click to collapse
No I need to update it.
twinnfamous said:
No I need to update it.
Click to expand...
Click to collapse
Cool and thank you. I'm looking forward to it.
I have purchased on ebay Htc u11 life tmobile network locked, i talked to tmobile and they said u have to use their sim for 40 days than they will send unlock app otherwise no solution, i contacted cellunlocker.com and they sent code although code isnt required for such oreo models , i took matter in my hand and installed twrp and unlocked the boot loader , now what can i do to unlock network , SOFF position anyone have idea what steps shouild i take , weather The Dark Night V3 (The S Life works ??
manzarabbas said:
I have purchased on ebay Htc u11 life tmobile network locked, i talked to tmobile and they said u have to use their sim for 40 days than they will send unlock app otherwise no solution, i contacted cellunlocker.com and they sent code although code isnt required for such oreo models , i took matter in my hand and installed twrp and unlocked the boot loader , now what can i do to unlock network , SOFF position anyone have idea what steps shouild i take , weather The Dark Night V3 (The S Life works ??
Click to expand...
Click to collapse
I did the following
buy an unlock code on the internet not from ebay, I cost 8 dollars... I put an unlocked rom of the same cid ... when you ask you put the code you bought and unlock it.
on tmobile they never know ****
PS: At the moment I'm looking for a rom to be able to use it since the software went away and I deleted all the files
Dont buy unlock code, its useless as the cell will unlock with app only and u wont be
betoloco04 said:
I did the following
buy an unlock code on the internet not from ebay, I cost 8 dollars... I put an unlocked rom of the same cid ... when you ask you put the code you bought and unlock it.
on tmobile they never know ****
PS: At the moment I'm looking for a rom to be able to use it since the software went away and I deleted all the files
Click to expand...
Click to collapse
DONT BUY UNLOCK CODE HTC U11 LIFE runs oreo and only unlock by app and wont promt for enter unlocks
Hello all.
SM-G965U, was AT&T but now unlocked for Fi. In the US.
Build: R16NW.G965USQS3BRJ6
Security Patch: Nov 1
What do I need to do to get back to the OTA schedule? I'm presuming its to flash onto an unlocked ROM but I can't work out exactly which thread I need to be following to make that happen.
That is the newest update until they release Pie. You can manually flash a beta version of Pie or sign up for the beta program.
Electroz said:
That is the newest update until they release Pie. You can manually flash a beta version of Pie or sign up for the beta program.
Click to expand...
Click to collapse
Hi Electroz,
I'm still showing 'no update available' even with unlocked US apparently getting the update. Is there anything else I have to do? :/
dogiedogie said:
Hi Electroz,
I'm still showing 'no update available' even with unlocked US apparently getting the update. Is there anything else I have to do? :/
Click to expand...
Click to collapse
Wait a few days, the rollout might not be instantaneous
It's unlocked but still run the same AT&T branded firmware. All AT&T phone requires an ATT sim card and in US to receive OTA. It looks like you are on Fi so you need to get an active ATT sim from a friend to receive update.
What is the alternative to flashing some sort of generic ROM instead? Specifically what ROM would I need?
you need firmware version SM-G965USQU3CSAB THATS THE PIE UPDATE . it rebrands based on sim card so you wil be branded tmobile on project fi . here the thread with the link u want https://downloadmirror.co/2CXl/G965USQU3CSAB_G965UOYN3CSAB_CCT.zip
Wirelessmodz said:
you need firmware version SM-G965USQU3CSAB THATS THE PIE UPDATE . it rebrands based on sim card so you wil be branded tmobile on project fi . here the thread with the link u want https://downloadmirror.co/2CXl/G965USQU3CSAB_G965UOYN3CSAB_CCT.zip
Click to expand...
Click to collapse
Thanks. I think I'm actually going to go with SM-G965U1 G965U1UEU3CSA8 because I don't believe you get any carrier features with Fi, even if it piggybacks on Tmobile anyway.
Hello, looking for some help to see if anyone can help me find the firmware of my A526U specifically for AT&T? I have moved my phone over from TMobile where I purchased it from, and am looking to re-flash it to AT&T. Was working fine for a few months, now I'm no longer able to make or receive calls.
After inserting the new AT&T SIM card, the TMobile splash screen still shows up. The Service Provider software version reflects TMobile still as well and I'm concerned that for whatever reason the phone did not fully update after inserting the new SIM. I spent 2 hours on the phone with AT&T support after the store said they couldn't help me. Pulled the SIM card out, restarted phone, put it back in, reset network settings etc. I've searched sammobile and I cannot find the AT&T firmware, only TMobile, Sprint, and TMK. I would sincerely be greateful please if anyone could help me by pointing me in the right direction for the firmware for this model phone.
AT&T doesn't make their firmware available publicly - for any device. I have a source who can get me Samsung firmware for any USA device - even AT&T. But he charges me for each one
I appreciate the quick response! Is there any option I have here? Could I try flashing a "U1" firmware to his phone then? He's currently on A526USQS4CVA6. I actually found your other post as I was also working on my note 10 plus - https://forum.xda-developers.com/t/n975u-and-n975u1-firmware-links-here.3957648/. If I'm reading that correctly, I should be able to correct? If so, how can I tell if the version I'm downloading is "downgrading the bootloader"
aschaffer35 said:
I appreciate the quick response! Is there any option I have here? Could I try flashing a "U1" firmware to his phone then? He's currently on A526USQS4CVA6. I actually found your other post as I was also working on my note 10 plus - https://forum.xda-developers.com/t/n975u-and-n975u1-firmware-links-here.3957648/. If I'm reading that correctly, I should be able to correct? If so, how can I tell if the version I'm downloading is "downgrading the bootloader"
Click to expand...
Click to collapse
1. Yes, you can try flashing U1 if you want
2. You can't "downgrade the bootloader" - Odin won't let you.
3. In A526USQS4CVA6, "4" is the position of the bootloader level/revision/binary. Make sure that whatever U1 firmware you download also has a 4 in that spot and you'll be fine. (Or just get the firmware from Frija or one of the other similar firmware download tools, because those throw you whatever the newest version is automatically)
iBowToAndroid said:
1. Yes, you can try flashing U1 if you want
2. You can't "downgrade the bootloader" - Odin won't let you.
3. In A526USQS4CVA6, "4" is the position of the bootloader level/revision/binary. Make sure that whatever U1 firmware you download also has a 4 in that spot and you'll be fine. (Or just get the firmware from Frija or one of the other similar firmware download tools, because those throw you whatever the newest version is automatically)
Click to expand...
Click to collapse
Thank you very much sir! I shall give this a go this weekend! You guys rock!
My AT&T N10+ N975U is running on Pie. It transitioned seamlessly with no changes made on my end. It was already using 4G VoLTE though. Same sim card.
I would contact AT&T advanced tech support as there may be an easier way.
4G VoLTE needs to be enabled in hidden settings.
blackhawk said:
My AT&T N10+ N975U is running on Pie. It transitioned seamlessly with no changes made on my end. It was already using 4G VoLTE though. Same sim card.
I would contact AT&T advanced tech support as there may be an easier way.
4G VoLTE needs to be enabled in hidden settings.
Click to expand...
Click to collapse
Your AT&T phone? So it's originally an AT&T model that you're still using with them? That's not the same situation that the OP is in
iBowToAndroid said:
Your AT&T phone? So it's originally an AT&T model that you're still using with them? That's not the same situation that the OP is in
Click to expand...
Click to collapse
The U is the AT&T variant vs the U1 which is the unlocked variant, correct?
blackhawk said:
The U is the AT&T variant vs the U1 which is the unlocked variant, correct?
Click to expand...
Click to collapse
Yup. But OP has a T-Mobile model that they moved to AT&T. There's also no guarantee that a Note 10+ will work the exact same way as an A52. You're also running 3 year old firmware, while OP is fully updated.
So i don't see the correlation.
iBowToAndroid said:
Yup. But OP has a T-Mobile model that they moved to AT&T. There's also no guarantee that a Note 10+ will work the exact same way as an A52. You're also running 3 year old firmware, while OP is fully updated.
So i don't see the correlation.
Click to expand...
Click to collapse
The old firmware works fine on 4G VoLTE... that's likely not the issue. What is the issue is it wasn't running on 4G VoLTE so it's likely the settings and sim card need updating not the firmware.
Hi All, thought I would provide an update... After spending hours on the phone with AT&T support this week and being frustrated with the AT&T store, I decided to proceed forward with flashing the U1 version. What started this all was last week my son could no longer make or receive calls on his AT&T A52 phone (we ported it from TMobile September 2021). The store and AT&T advanced tech support said there were issues with people's BYOD devices, even though the A526U and A526U1 shows on the supported devices list. The store rep said he's been getting people in left and right that can't make or receive calls, and all they can do is upsell customers to an AT&T branded phone.
SO... my son's phone was on A526USQS4CVA6. Startup screen showed TMobile still, even with the AT&T SIM card in it. I proceed to flash the A526U1OYM4CVB2_ATT that I found from Sammobile. Was hoping someone had just the "U" version but I couldn't find this anywhere. When doing the flash, I used the Home_CSC file (I had to download a patched version of ODIN as it was stuck as setting up connection) and when it finished it would just keep going back to the download screen on the phone and I freaked out. I did some more research and decided to flash again using CSC instead of Home.CSC (I did a backup using smart switch on my PC luckily). This WORKED! I'm guessing because the software version he was on was different than what I was trying to flash too so maybe this is why I needed the CSC for a clean flash (there was no user data file that downloaded from SAMMOBILE).
Now, calls are working on my son's phone again! AND his service provider software version now reflects ATT vs TMB! Man this has been one heck of a journey lol. I've seen numerous forums on google of people having the same trouble with me, their BYOD devices not working. Seems a flash of U1 worked for me, so hopefully this helps others out there!