(Sorry for my bad English)I have a serious issue..i try to flash custom Rom some days ago & mistakely flash wrong boot.img..and my phone stuck in bootloop..even can't open recovery mode also..when i download and try to flash official rom... download tools user id & password required to open & flash firmware..any unofficial method to flash ofp flash file..
Related
Hi Everyone ! When You have Flashed a custom recovery (TWRP,CMW,PHILLZ...) and also flashed CF Auto-Root, it arrives that you disable the DEVELOPER OPTIONS or OEM UNLOCK by mistake ! Then, when you reboot your phone, you get stuck at boot with this annoying message: 《 CUSTOM BINARY BLOCKED BY FRP LOCK 》which doesn't allow you to boot up your phone ! After trying a lot of methods on different forum,lot of methods requires you to flash stock firmware to get your phone working again ! I finally found a way to solve it and You will not LOOSE YOUR DATA and no need to flash FULL STOCK FIRMWARE. JUST FOLLOW THIS METHOD STEP BY STEP
*REQUIREMENTS
1. STOCK ENG Boot file
2. STOCK Recovery file
3. ODIN.exe
1. Download Stock SM-J510FN ENG Boot file from here : Links removed by mods
2. Download Stock SM-J510FN Recovery file from here :
3. #Put phone in download mode and open odin
#Click on BL and choose the Stock Recovery file you just downloaded
#Click on AP and choose the Stock EN Boot file you downloaded
#Make sure Auto-Reboot and F.Reset Time are checked in odin
#Click on start! It will take less than 1 minutes to to flash the files !
YOUR PHONE SHOULD BOOT NORMALLY:good:
NB: NO LOSS OF DATA
ONLY ROOT WILL BE LOSS
#NOW RE-ENABLE DEVELOPER OPTIONS and OEM UNLOCK and flash again your custom recovery and the CF Auto-Root file to get root permission again !
ENJOY !
i tried it, the phone booted up
but it's bricked
help would be appreciated
Nvssv6 said:
Hi Everyone ! When You have Flashed a custom recovery (TWRP,CMW,PHILLZ...) and also flashed CF Auto-Root, it arrives that you disable the DEVELOPER OPTIONS or OEM UNLOCK by mistake ! Then, when you reboot your phone, you get stuck at boot with this annoying message: 《 CUSTOM BINARY BLOCKED BY FRP LOCK 》which doesn't allow you to boot up your phone ! After trying a lot of methods on different forum,lot of methods requires you to flash stock firmware to get your phone working again ! I finally found a way to solve it and You will not LOOSE YOUR DATA and no need to flash FULL STOCK FIRMWARE. JUST FOLLOW THIS METHOD STEP BY STEP
*REQUIREMENTS
1. STOCK ENG Boot file
2. STOCK Recovery file
3. ODIN.exe
1. Download Stock SM-J510FN ENG Boot file from here : Links removed by mods
2. Download Stock SM-J510FN Recovery file from here :
3. #Put phone in download mode and open odin
#Click on BL and choose the Stock Recovery file you just downloaded
#Click on AP and choose the Stock EN Boot file you downloaded
#Make sure Auto-Reboot and F.Reset Time are checked in odin
#Click on start! It will take less than 1 minutes to to flash the files !
YOUR PHONE SHOULD BOOT NORMALLY:good:
NB: NO LOSS OF DATA
ONLY ROOT WILL BE LOSS
#NOW RE-ENABLE DEVELOPER OPTIONS and OEM UNLOCK and flash again your custom recovery and the CF Auto-Root file to get root permission again !
ENJOY !
Click to expand...
Click to collapse
Thread closed as ppc links not allowed and FRP tutorials are dark areas and guides for thieves
Hi all happy new year, I have a Leagoo kiicaa mix did the firmware and got a brick,how to restore.Thank you
mine lasted 3 days then when i turned it on it was bricked i got it into recovery mode but thats it it wont connect to SP flash tool any help would be great thanks
Turn off you phone download sp flashtool,install all the required drivers and the stock rom from needrom.com
Then open spflash tool extract the stock rom select the recovery file from the folder on the sp flash tool click the arrow then connect your phone via cable switched off wait a couple of min your phone would be flashed
Always flash the old stock rom not the new one because it blocks all the unauthorized things such as installing twrp
If you want to flash twrp download twrp.zip file and the magisk or the SuperSU zip switch off the phone open sp flash tool and select the twrp.recovery file and click the arrow key it would start install then connect your phone your phone would be flashed
Tips: after reinstalling the stock rom if your device got bricked do a couple of restart cause the stock recovery checks the app if not your phone could get soft brick so do this step
Also if you flashed the twrp but still showing stock recovery close spflash tool and just select the twrp file.
I think it should come off help
Sorry because of my poor english
Ask me anything you want
Hello there. I LOVE YOU LEAGOO KIİCAA MİX TELEPHONE. ORIGINAL ROM CYLINDER IS INCORRECTLY WORKING FOR IMMEDIATE LOADING. CAN YOU HELP ME TO ORIGINAL SOFTWARE LOADING? I did not get a backup. I did not find it on the internet. PLEASE HELP ABOUT STOCK ROM.
ALSO THE TELEPHONE WAS VERY HEATING ABOUT YOU?
merhaba. ben sizden LEAGOO KİİCAA MİX TELEFON ALDIM. İMEİL YÜKLEMEYE ÇALIŞILIRKEN ORJİNAL ROM SİLİNDİ YANLIŞLIKLA. BANA ORJİNAL YAZILIM YÜKLEMEDE YARDIMCI OLABİLİRMİSİNİZ? YEDEK ALINMADI.İNTERNETTE DE BULAMADIM. LÜTFEN YARDIM STOCK ROM HAKKINDA.
AYRICA TELEFON ÇOK ISINIYOR BUNUN İLE İLGİLİ BİR ÖNERİNİZ VARMI?
Links
Needrom .com search leagoo kiicaa mix
Here is the link where you can find all the roms with twrp,stock ROM and some coustom roms
And follow to guide above for using
Flash tool
I was using a custom OREO rom, and i tried to install another country's stock firmware (CYV) which had android OREO. Now my sim is not recognised, I am trying to flash the original stock of my carrier(COS) (Which had android 7) firmware but odin fails, and device shows SYSTEM REV. CHECK DEVICE 1 BINARY 0.
I can only use ODIN to flash the new (CYP) firmware.
Also after installing the CYP firmware it added on the boot a line Protected by knox which did not exist before, please I have tried everything? Is my phone bricked for good?
Hi , try this:
1. Download your stock firmware Android 7 if you have it skip this step
https://updato.com/firmware-archive-select-model?record=22DB920E54E011E89F15FA163EE8F90B
2. Once you download your firmware use 7-zip and rename end of firmware name tar.md5 to .tar and extract to desktop just recovery.img .
3. Now use 7-zip and recovery.img to archive recovery.tar .
4. Open Odin , click on AP and add recovery.tar , put your device in Download mode and flash with odin .
5. If you successfully flashed recovery just reflash after that full firmware .
If that problem is still there try DBT version .
https://updato.com/firmware-archive-select-model?record=31D0195852DA11E7963AFA163EE8F90B
Hello
I have Huawei mate 9 pro
and i installed twrp
by accident i wiped system so now my phone is only restarting
but i can enter to twrp mode ..
so i searched for rom to install in twrp so maybe it work but i couldn't found any for Huawei mate 9 pro !!!
Help please
update ::
when I try to flash the update for the system so it run , it gave me message "Error 9"
Help please
Any help ?
Hi , put your phone in fastboot mode:
https://www.hardreset.info/devices/huawei/huawei-mate-9/fastboot-mode/
Download and extract stock firmware for your device and flash boot.img , recovery.img and system.img .
If your firmware come up with .app use Huawei Update extractor in order to take those files from in to flash with ADB & Fastboot command line .
You have examples on the YouTube how to take and flash those files from .app. : ) Good luck
Thank you very much
that was helpful
Teddy Lo said:
Hi , put your phone in fastboot mode:
https://www.hardreset.info/devices/huawei/huawei-mate-9/fastboot-mode/
Download and extract stock firmware for your device and flash boot.img , recovery.img and system.img .
If your firmware come up with .app use Huawei Update extractor in order to take those files from in to flash with ADB & Fastboot command line .
You have examples on the YouTube how to take and flash those files from .app. : ) Good luck
Click to expand...
Click to collapse
I wanted to root my A52 5G (SM-A526B) i first unlocked the bootloader
then i downloaded my Firmware with Frija and patched the boot.img with Magisk then i went into download mode and flashed it with Odin
Odin gave me a Green PASS Message and i knew i needed to factory reset with recovery mode but i couldnt get into it then i got into a boot loop with the Samsung Galaxy Bootlogo
then i tried to flash Twrp with odin to factory reset because i couldnt get into the stock recovery mode Odin again gave me a PASS Message then i tried to get into recovery mode but it still didnt work and now im trying to flash Stock Firmware but cant get it to work what should i do
The picture is what happens when i try to boot please help me to flash stock firmware
When i try to flash Stock Firmware it fails at the very end on vbmeta.img
The a52 5g doesn't have twrp currently. Also, you might have flashed the incorrect firmware.
Plus, just for you to know, you do not need to do factory reset after flashing your firmware. What steps have you taken to flash this firmware? How did you patch magisk? Show the steps so we can help you cuz you might have done something wrong
Ok it seems that your mistake here is that you are trying to flash boot.img. so what you actually suppose to do is to download the firmware, take the AP file from the firmware(don't extract the file!). Then, move the file to your phone and download magisk on your phone. You will see that magisk is offering you to install magisk on the top corner of your screen. You need to choose to patch the file, the AP file. Once magisk done, on your file explorer(probably in downloads) a file called "magisk_patched xxxx.tar" (the xxxx representing the version of magisk). Take this file and copy it to your computer, and on Odin, instead of using the AP file, use the magisk file. Boom, done. Now first, we need to recover your phone to its original condition. Take the AP file and flash it(not the boot.img!)
DownBaddie said:
When i try to flash Stock Firmware it fails at the very end on vbmeta.img
Click to expand...
Click to collapse
Try flashing other parts of firmware, not just AP
i.e. BL, CSC and CP
But don't add home_csc (USERDATA).
If all fails, you can use EDL mode to flash firmware
How To Flash Qualcomm MBN Firmware Via QPST tool
If your device is based on Qualcomm’s CPU and you’re searching for an easy way to flash the device’s stock ROM, here ends your search. You just need the QPST tool and the instructions here to guide you. Follow the instructions below to get you started. Prerequisites: Qualcomm QPST tool –...
www.leakite.com