Hi, I'm running Emui 9 on my ANE-LX1 and it got bricked while trying to flash openkirin roms. Each time I flash TWRP into the recovery_ramdisk partition, it just boots in to the stock recovery_ramdisk. Everytime I try to flash different system files, it doesn't even show boot animations and boots straight into stock recovery.
I don't know what to do and if someone has the solution, please help.
TIA
Turned out I somehow messed up the kernel. When I flashed the kernel, everything started working smoothly.
Related
So I did a stupid, installed stock rom via TWRP and then installed the OTA. Now my phone will only boot into TWRP, I've tried recovering my LineageOS backup and wiping all and installing stock rom again but nothing boots past TWRP.
I have the UK model and can't find stock nougat to flash with fastboot commands, can anybody help?
Edit - I just flashed 7.0 RETMX and it seems to work fine, this can be deleted.
Hey guys ,
I unlocked bootloader and flashed official twrp via fastboot . I successfully booted into twrp but when I click reboot my phone stuck on mi boot logo . I personally tried many thing to tackle this problem. But every time I got same thing . Can anyone solve this ?
Redwolf twrp is working fine .
Yes, happend the same to me, basically what's happening is that your phone can't decrypt itself in the boot.
What's the fix? Flash twrp, go into it
Then wipe EVERYTHING,even format.
That will be you new partitions (new encryption) in your phone.
Then with everything formated, plug your phone in twrp and copy whatever you want, and viola.
You're done, copy the rom you want to flash and will boot.
Please let me know when your phone is fixed.
Or you can just root your device
I had the same issue as you yesterday.
You can try lazyflasher to prevent bootloop
I had RNE-L21C185 with Stock Oreo updated
Then flashed Mofruz latest rom working fine, but then I tried to install Stock recovery, I was not able to do so
as it would show error with partition etc. Then tried to install the same TWRP from Morfuz ROM back again.
In fastboot mode I already have PHONE Unlocked and FRP Unlocked messages
So either Morfuz ROM TWRP or any other TWRP recovery, show properly completion of flash command
But when tried to boot into recovery it goes in a loop (the loop shows phenom image, then shows the default
screen that is shown before launching of recovery), then restarts again, and it goes on loop.
So I dont know why I cannot get to load into any of TWRP I have.
The ROM is working fine, if I properly shutdown mobile and start it again, it boots to the phone and
I can use my phone as normal.
Any help guys ?
try to flash stock rom via hisuite
http://huawei-firmware.com/rom/huawei-mate-10-lite/rnel21/8437
or try one of these twrp
https://mega.nz/#!GxsAUQaS!2-9yPFh3reghkGcfSl3nRIJhHGkP8fqDsgUG66ewjkk
https://drive.google.com/file/d/1_dfpSOCD23Oz_LexYMn1JNRVfrlvKU-x/view
https://mega.nz/#!OzQ3GCJK!ofjiXcb7VRpGkhrd1vwXrVeSAO2vF1BVYLYRX2fExn4
.
Thanks problem solved by:
Tried to use fastboot command to flash official stock Kernal and ramdisk (Oreo version) phone got no OS after it as
it will go on bootloop, now even the forced download (dload folder) method wont work, factory data reset wont work
(both of above will show EMUI circle with no processing or text whatsoever)
At this stage, flashed Catuva recovery from Morfuz ROM again, and it worked
Hi, I'm hoping someone can offer some assistance. I have an Elephone P9000 (normal version NOT lite) that has official Android 7.0 and I want to install LineageOS 14.1.
As per the instructions I used SP Flash Tool to downgrade the phone to Android 6 (Elephone_P9000_20170112) which worked fine.
I then attempted to install TWRP 3.2.1.0 which also appeared to work ok as I could boot into TWRP recovery and all looked good. However when I tried booting the phone normally it stuck at the white boot logo and would not progress any further.
So I reloaded the Elephone_P9000_20170112 rom again with SP Flash Tool after which the phone would boot normally and then tried installing TWRP 3.0.2.8 as I'd seen threads saying that this version definitely worked with the P9000. However this produced the same result that I could boot into TWRP fine but it would get stuck at the boot logo if I tried booting the phone normally.
I have also tried re-installing the ROM but unticking the recovery option in SP Flash Tool hoping that this would leave the working TWRP intact but this didn't work either.
When I try to boot into recovery I get the little Android laying down with a red exclamation mark.
So I don't know where to go now. I can get EITHER Android to boot or TWRP to boot but not both.
Just in case it is relevant, I am using SP Flash Tool v5.1804_Win in Windows 7 32bit. I don't have any SIM's in the phone and no SD card inserted.
Can someone point me in the right direction please.
Thanks
Russell
Try flashing stock rom with 810 at the end then twrp 3.2.1 and then aokp it is better then lineage
aljoscha81 said:
Try flashing stock rom with 810 at the end then twrp 3.2.1 and then aokp it is better then lineage
Click to expand...
Click to collapse
Thanks very much, that worked fine and AOKP looks really good. When it said install the latest Android v6 it obviously means the previous latest not the current latest
Just in case anyone else is having the same trouble I was:
Using SP Flash Tool load the 20160810 ROM available here: https://forum.xda-developers.com/elephone-p9000/development/rom-elephone-p9000-20160810-t3445897
Then, also using SP Flash Tool, load TWRP v3.2.1 which is available from here: https://eu.dl.twrp.me/p9000/
Then you can use the TWRP recovery to load whichever ROM you like (LineageOS, AOKP etc, etc)
Once again, thanks very much for your help.
:good:
EDIT: I figured it out myself, for anyone else in the same situation: I downloaded the proper Stock Rom for my phone and just flashed it with fastboot flash, no custom recovery was needed. After that I simply flashed Lineage OS and it's working like a charm.
Hello, I recently switched back to an Android phone that's why I'm a bit rusty. I successfuly installed Resurrection Remix on my Huawei P20 Lite.
After realizing there is no Notch support I decided to go back to stock or switch to Lineage OS.
Now I have two questions:
1) On the OpenKirin page it says you need stock EMUI 8.0 before you apply one of their ROMs. Does this mean if I want to switch to Lineage OS I need to go back to stock EMUI or can I go from RR to Lineage?
2) I downloaded 'Huawei P20 Lite-ANE-LX1 8.0.0.144(C432).zip' from xda which is supposed to be the stock rom. In the instructions on here it says I need to install TWRP. However OpenKirin says their ROMs don't work with TWRP. Can I just flash the stock firmware with adb fastboot, like described in the OpenKirin FAQ?
So my question basically is, what do I have to do to go from RR with stock recovery back to stock EMUI?
im in the same problem.. my fone brick in twrp logo.... i dont know how pass this logo
You can use eRecovery to download the entire ROM, you need the stock recovery and flash it with fastboot (fastboot flash recovery_ramdisk recovery_ramdisk.img) then go to the recovery mode and download the rom using WiFi and that's all, as advice I recomend you always make a system backup in the sdcard using TWRP. Sorry for my bad english. You can dowload the recovery here
Dre0x said:
You can use eRecovery to download the entire ROM, you need the stock recovery and flash it with fastboot (fastboot flash recovery_ramdisk recovery_ramdisk.img) then go to the recovery mode and download the rom using WiFi and that's all, as advice I recomend you always make a system backup in the sdcard using TWRP. Sorry for my bad english. You can dowload the recovery here
Click to expand...
Click to collapse
Thanks... i made this and everything ok now
illyx said:
EDIT: I figured it out myself, for anyone else in the same situation: I downloaded the proper Stock Rom for my phone and just flashed it with fastboot flash, no custom recovery was needed. After that I simply flashed Lineage OS and it's working like a charm.
Click to expand...
Click to collapse
What file did you flash in fastboot, the full-ota file?