Hi.
Im in need of tx95 android box stock firmware file.
Im using that box with atv experience rom but want to use box with pioneer appradio now so I need stock rom first.
Box is 2/16gb a905x. I think it came with android 6 out of the box.
Would be great if I would get it back to stock as I have some issues with arunchained app on atv experience rom.
I used that box with appradio and arunchained reloaded app with stock firmware with no issues before I flashed atv experience to use it at home.
Thanks in advance.
hi,
I Have a TX95 it have the same specs what yours have and i have made a backup from the stock firmware with twrp.
i made a zip file from the firmware with twrp recovery image in it you need to extract it to a usb or sd card and put it in the box and boot the box keep the reset hole pressed with a sim eject tool or toothpick and then it boot to twrp and select restore and click on ''2014-12-31--18-07-20_p212- and swipe to restore and after a while if it is completed click on reboot system.
if it does not work flash the rom from Tanix TX5 Pro on your box and boot the box.
Wait if it is done and then extract the TWRP zip file that was in the previous post to a sd card or usb stick and boot the box to SD or usb.
Select in twrp to restore select in storage sd or usb and select the folder and slide to restore.
After it is done reboot the box and wait and then you have the stock rom back.
Download link to Tanix TX5 Pro link:
MediaFire
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
download851.mediafire.com
Related
I tried to install a custom rom yesterday. Unluckily I treid to do it quickly before leaving the house. I rooted my tab, then copied the custom rom file and the Gapps file to my internal storage card and also installed a newer CWM version. At some point I must have formated my entire Date because there are no files left on my internal storage card. The tab goes up to the Samsung Logo and that's it. I'm guessing that there is no OS installed on the device. (Galaxy Tab 10.1n 3G - GT-P7501)
Now to my questions:
How can I copy the ROM File to the internal storage card using odin or any other programm? I can go into the download mode and I can start CWM.
Do I have to install anything else or should the Rom be enough?
I read somewhere, that I should copy the PIT File to my tab but I can't find the file anywhere!
After spending the last 4 hours looking for answers and a solution I hope that someone here can help.
Barryl3 said:
I tried to install a custom rom yesterday. Unluckily I treid to do it quickly before leaving the house. I rooted my tab, then copied the custom rom file and the Gapps file to my internal storage card and also installed a newer CWM version. At some point I must have formated my entire Date because there are no files left on my internal storage card. The tab goes up to the Samsung Logo and that's it. I'm guessing that there is no OS installed on the device. (Galaxy Tab 10.1n 3G - GT-P7501)
Now to my questions:
How can I copy the ROM File to the internal storage card using odin or any other programm? I can go into the download mode and I can start CWM.
Do I have to install anything else or should the Rom be enough?
I read somewhere, that I should copy the PIT File to my tab but I can't find the file anywhere!
After spending the last 4 hours looking for answers and a solution I hope that someone here can help.
Click to expand...
Click to collapse
You can't use odin to copy a file to your device and the mount sd-card option in CWM has never worked for me.
What you need to do is flash a stock odin file with its pit file and then you can reroot and reflash CWM.
Put the rom and gapps on your tab,
and hopefully then you can flash the rom everything will work correctly.
Here is a link to the odin tar file I use: https://www.dropbox.com/s/3mpm0lez9ikbzvf/Stock-3.2-HTJ85B.UEKMM.tar
You can find a tutorial for flashing this on XDA somewhere.
Thank you so much!!
It didn't work at first but after taking the tab out of the docking station and changing the usb port it finally flashed everything without hanging at the bin file. i will try to install a custom rom now.
thanks again!
Barryl3 said:
Thank you so much!!
It didn't work at first but after taking the tab out of the docking station and changing the usb port it finally flashed everything without hanging at the bin file. i will try to install a custom rom now.
thanks again!
Click to expand...
Click to collapse
No problem! I'm just glad it all worked out for you!
I am facing same problem but with TWRP recovery mode. I wiped out sdcard and all data. I am using P7500 tab. Can you help me through the process. All I can do it right now is go it recovery mode, nothing else.
well, just do what highriser posted, download odin, download a tar file that represents a Gtab ROM and flash it to your tab using download mode. As I am at work I can not provide you with links to the files (as online storage is blocked by our IT Security).
Check this thread and pay attention to the "UNROOTING & RESTORING STOCK RECOVERY" part.
http://forum.xda-developers.com/showthread.php?t=1171089&highlight=filesfordummies
Thanks. I managed to make it work. I was having problem finding PIT file.
Sent from my Galaxy Nexus using Tapatalk 2
Hello
here i am posting here because i cant post on Miscellaneous Android Development , how ever i think i post there before while working on B5512
I Just got new G700 it came with B115 middle east channel , phone is good but as a start is there is a update i must ask my self is root ready , and CWM for sure so i start the digging
@chamaruco thank you for your great thread which saved and helped many people
now i got a file and i think you were looking for it ""G700-U10_V100R001C00B124CUSTC432D001_Firmware_Portugal_Channel-Others_4.2.1_EMUI 1.8_05021LMW.zip"" it contain usb upgrade and sd upgrade with drv and flash tool
i notice EMUI 1.8 not 1.6 which i saw for example a permission manager with it on P6 is that here in that rom too ?
is that rom improved than mine b115 phone is good for first look but
(in B115)
1-camera quality is strange i dont mean bad but it look very strange it is like very poor on quality
2-in call volume is too low in my opinion all " in test mode"
Question now did any one get that update "EMUI 1.8 B124" can tell is there is any improvements ?!
Question am i able to flash CWM image directly with flash tool to save some annoying procedures ?!
a member here provide flasher and cwm.img and orginal recovery.img
i did not work with the phone yet need to shift data from old phone remove ext2 part and prepare for change , and feeling lost here
want to strike it all once
i will upload "EMUI 1.8 B124" soon as it came from a private server
any suggestions are welcome
When you install 1.8 you will notice there is only a tap error from uploader..it is a 1.6 emui. That's all.
Hello
some info to add
incase of softbrick the phone and unable to flash using spflash tool and receive " not allowed , forbidden "
solution
inside the usb upgrade >> flash "Rework-Secro" using scatter in same folder then you will be able to use download mode again
how to install this firmware i.e. B124 on G700-10
chamaruco said:
When you install 1.8 you will notice there is only a tap error from uploader..it is a 1.6 emui. That's all.
Click to expand...
Click to collapse
chamaruco; Thanks for the best of the best user guides you have been making for all of us, but what i want to know is to be able to install the B124 into my phone i.e. G700-10, i have rooted my phone using farmaroot, made a back up of my factory shipped OS and make all my data backup safe through Hisuit, have downloaded the firmware B124 Purtogal version, extracted the zip, (it is now carrying META-INF, boot.img, cust.img, logo.bin, sdload.log, system.img) i have made a folder in my SD card named dload and copied the files in it, uninstalled mobileuncle, reinstalled new mobileuncletool, copied my backuped recovery.img into my SDcard and somehow installed the recovery in to my mobile,
now please show me the way forward, what i need to do and how, please step by step if you kindly can. please.
YOU ARE THE BEST CHAMARUCO
talvigi said:
chamaruco; Thanks for the best of the best user guides you have been making for all of us, but what i want to know is to be able to install the B124 into my phone i.e. G700-10, i have rooted my phone using farmaroot, made a back up of my factory shipped OS and make all my data backup safe through Hisuit, have downloaded the firmware B124 Purtogal version, extracted the zip, (it is now carrying META-INF, boot.img, cust.img, logo.bin, sdload.log, system.img) i have made a folder in my SD card named dload and copied the files in it, uninstalled mobileuncle, reinstalled new mobileuncletool, copied my backuped recovery.img into my SDcard and somehow installed the recovery in to my mobile,
now please show me the way forward, what i need to do and how, please step by step if you kindly can. please.
YOU ARE THE BEST CHAMARUCO
Click to expand...
Click to collapse
Dload inside put update.app file, restart in updatemode
chamaruco said:
Dload inside put update.app file, restart in updatemode
Click to expand...
Click to collapse
But my mobile does not boot into CWM recovery mode as i have seen in my previous Qmobile A8 it always restarts in the defualt recovery mode which only give options to "1. reboot, 2. update from SDcard, 3. update from cashe, 4. wipe/delete user data and wipe/delete cache and in the last there is a calibarate TP, AND OFF COURSE THESE ALL ARE THE ANDROID BUILTIN RECOVERY STEPS NOT OF THE CWM
And off course there is not any file or folder named update.app in the downloaded .zip/extracted file. "as i have mentioned above the folder contains a folder named META-INF and three img files named as boot cust and system while a .bin file named logo too.
THANKS FOR YOUR TIME AND HELP.
foffa said:
Hello
some info to add
incase of softbrick the phone and unable to flash using spflash tool and receive " not allowed , forbidden "
solution
inside the usb upgrade >> flash "Rework-Secro" using scatter in same folder then you will be able to use download mode again
Click to expand...
Click to collapse
So after I select the Reworked scatter file there is only the sec_ro partition checked to flash. So after flashing it do I now select the previous scatter file and then flash everything (including preloader)?
I rooted my phone, and then i was trying to flash a Marshmallow Rom. For this, i wiped my system, boot, dalvik cache, internal memory. I forgot to take a nandroid backup. For some reasons, there was some error in flashing that zip file, so i tried to reboot my phone normally and it failed. When i reboot my phone, the company logo appears and it remain sticked there. For now, i could only access the recovery and fastboot. Please HELP me..... Thank you.....
You got exactly same problem with me but i have model: Honor7 Premium (PLK-L01)
Hi,
what did you expect? If you wipe de system partition then obviously the operating system is gone.
What you need to do is to download the full stock rom of your phone somewhere on the internet (needrom.com for instance if available).
You need to take the closest version of your old system and also the same technical name (PLK-UL00).
For instant if you were already on Android 6.0, you can no longer use a stock rom of Android 5.x.
When you have that full stock rom on your computer, you need to use multi-tools and use the unbrick option. Meaning you will be asked to extract the most important img files from the stock rom and to put them into a specified folder. The tool will then restore that rom on the partition file.
Kind reg,
I had android lollipop 5.0.2. Is it possible that i install the backup file of any other person's honor 7 PLK-UL00 running same android?
Hi,
please have a look there and use the stock rom that fits with your model and version.
https://yadi.sk/d/ZD8hXFjenRFHf
Kr,
how do i flash an UPDATE. APP file?
Create folder called dload on your SDCard and copy Update.app file to your SDCard inside that "dload" folder.
Then shutdown your device and use 3-Button method(Vol- & Vol+ & Power button) to boot that to recovery, that should start installing "recovery" file what is that Update.app inside dload folder.
Sent from my PLK-L01 using XDA-Developers mobile app
i don't know but the 3-button method is not working. When i do so, it boots to the recovery and nothing happens. Anyways, i have copied the dload folder with update.app file to the sdcard.
Use Multi-Tools available in the forum. There is a little app where you will be able to extract all required files from the file update.app.
Then in multi-tools use unbrick option and it will install the stock rom correctly. ++
http://forum.xda-developers.com/honor-7/general/honor-7-multi-tool-t3281176
Thank you!!!!! Sebastien_be and everyone to help me... It worked very well.. Thank u guys so much for the help...
Hope this is in the right place ..
I have a couple of Tanix TX3 mini TV boxes that I would like be able to backup and recover across devices.
I have put S905-TWRP3-VIT.zip onto a micro SD card and can load TWRP from the boot recovery menu.
I can then backup ROM, system and data partitions to a USB flash drive.
if I now go into the restore menu I can see the backup file.
My problem is that if I now start TWRP from a different device I can no longer see the backup file.
If I create a very small backup, I can see the new backup but not the old one.
If I reboot normally, I can see both backup files within the same directory via any file explorer app.
Obviously, this stops me from being able to restore the system to the target device.
I can't see anything obviously wrong, can someone tell me where I am going wrong please?
Many thanks
Baldplumber said:
Hope this is in the right place ..
I have a couple of Tanix TX3 mini TV boxes that I would like be able to backup and recover across devices.
I have put S905-TWRP3-VIT.zip onto a micro SD card and can load TWRP from the boot recovery menu.
I can then backup ROM, system and data partitions to a USB flash drive.
if I now go into the restore menu I can see the backup file.
My problem is that if I now start TWRP from a different device I can no longer see the backup file.
If I create a very small backup, I can see the new backup but not the old one.
If I reboot normally, I can see both backup files within the same directory via any file explorer app.
Obviously, this stops me from being able to restore the system to the target device.
I can't see anything obviously wrong, can someone tell me where I am going wrong please?
Many thanks
Click to expand...
Click to collapse
Solved
Since there aren't any Custom ROM for the SM-T380 I made this TWRP back from my tablet, running on stock Pie I took all the bloatware, Knox out to add some root mods, and latest updates with Magisk root with Safetynet Passing. No other personal app added
This is a compressed TWRP backup, not a flashable ZIP!
Download it from here
1971-12-30--01-34-26_PPR1180610011T380DXU3CSL2.zip
drive.google.com
how to install TWRP
https://forum.xda-developers.com/ga.../twrp-3-2-1-1-tab-sm-t380-10-02-2018-t3747564
DOWNLOAD zip file first then EXTRACT that zip file from above Google Drive's link to your PC using 7zip
Now REBOOT your tablet into TWRP recovery
connect tablet using USB cable to your PC make sure you have Samsung drivers installed, so you can see your tablet on your PC
Now ON your Tablet create a backup within TWRP's backup tab on your SD Card storage (choose storage as a SD card)
Using your PC browse to that folder and open that SD card's TWRP backup folder.
Go to last folder where you should see some files, delete all of them then
Copy EXTRACTED files from (Google Drives) into that TWRP backups folder on your SD card TWRP/BACKUPS/xxxxxxxx/ from your PC to that SD card using your PC.
xxxxxxxx is your device serial number;
Once done copying the file
go to, restore's tab within your TWRP on your tablet
RESTORE everything showing there (all those three partitions) once done
REBOOT to system
IF you can't see those copied files on your tablet's SD card then you have not copied those files into it also you can restart your tablet back into recovery using TWRP after restarting you should see those files into your SD card using restore tab within TWRP.
Thanks
Samsung - for the device, stock firmware & open source
TeamWin - for TWRP recovery @ashyx
@Chainfire - for SuperSU
Magisk
All authors of binaries/libraries, source codes, or tutorials...
Quote:
Please, PM me if I forgot to add proper credits for your work!
Can you tell me how you rooted the SM-T380 I tried rooting it using the 2018 guide but it's not working and I tried patching the Boot.img ( from Sammobile) with magisk but when i open the magisk app it says Installed: N\A Ramdisk: Yes A\B & Sars: no.
Or can you share the stock boot animation from the T830 since I'm not a big fan of the Marvel's avengers/iron man boot animation.
i just installed this and it works great, total life saver. i was about to toss my tablet in the trash
@xfk110, out of sheer desperation I want to try this. I understand why and how it should work, and I'm downloading your backup now. But a couple of questions first if I may:
1. Will Titanium Backup work with this rooted firmware? That's most important and my biggest frustration, after trying every other way described in the T380 threads, with both Oreo and Pie, TWRP or patched boot image. Nothing has worked well enough for me.
. . . My Tab A arrived with XAR 3CTH4 which meant I could downgrade it to the last Oreo update 3BSD1, and I've been back and forth between versions trying to make something work with TiBu. I'm a diehard Titanium user. I have tried 4-5 different root methods and every effort has failed somehow, if only that TiBu would not run. (Most efforts were even worse failures though.)
2. How important is the firmware version (and CSC) on my Tab A? . . . My T380 came with XAR firmware . . . Should I match the 3CSL2 version of your backup exactly, i.e., should I flash 3CSL2 first? Or if I'm on 3CSI5, would that be close enough? (I ask because I'm getting really really tired of changing firmware on this Tab lol, and I already have 3CSI5 downloaded and unpacked.)
3. You mention "all of those files" -- for a TWRP restore I would expect to select ONE FOLDER to restore from, so I'm a little confused about what you mean by "all of those files". Wouldn't it necessary to copy all of those files to one new folder under TWRP/BACKUPS/my-serial-number? Maybe named 2022-01-18, something short and simple.
I do truly truly hope this will work for me. Thanks in advance for however much you can help me understand everything I need to do to get a solid working root.
Just wanted to thank you for providing this guide. It worked first time for me and I'm very happy with the improved speed and space.
Thank you!
zfk110 said:
Since there aren't any Custom ROM for the SM-T380 I made this TWRP back from my tablet, running on stock Pie I took all the bloatware, Knox out to add some root mods, and latest updates with Magisk root with Safetynet Passing. No other personal app added
This is a compressed TWRP backup, not a flashable ZIP!
Download it from here
1971-12-30--01-34-26_PPR1180610011T380DXU3CSL2.zip
drive.google.com
how to install TWRP
https://forum.xda-developers.com/ga.../twrp-3-2-1-1-tab-sm-t380-10-02-2018-t3747564
DOWNLOAD zip file first then EXTRACT that zip file from above Google Drive's link to your PC using 7zip
Now REBOOT your tablet into TWRP recovery
connect tablet using USB cable to your PC make sure you have Samsung drivers installed, so you can see your tablet on your PC
Now ON your Tablet create a backup within TWRP's backup tab on your SD Card storage (choose storage as a SD card)
Using your PC browse to that folder and open that SD card's TWRP backup folder.
Go to last folder where you should see some files, delete all of them then
Copy EXTRACTED files from (Google Drives) into that TWRP backups folder on your SD card TWRP/BACKUPS/xxxxxxxx/ from your PC to that SD card using your PC.
xxxxxxxx is your device serial number;
Once done copying the file
go to, restore's tab within your TWRP on your tablet
RESTORE everything showing there (all those three partitions) once done
REBOOT to system
IF you can't see those copied files on your tablet's SD card then you have not copied those files into it also you can restart your tablet back into recovery using TWRP after restarting you should see those files into your SD card using restore tab within TWRP.
Thanks
Samsung - for the device, stock firmware & open source
TeamWin - for TWRP recovery @ashyx
@Chainfire - for SuperSU
Magisk
All authors of binaries/libraries, source codes, or tutorials...
Quote:
Please, PM me if I forgot to add proper credits for your work!
Click to expand...
Click to collapse
Hello could you please make a video, the truth is that I do not understand anything.
Can this process be done using internal storage?
banistersmind said:
Can this process be done using internal storage?
Click to expand...
Click to collapse
No, unfortunately, this process can only be completed with a micro sd card and another computer with an sd card reader. the sd card must be at least 8gb to work.
Still works great as of 3rd May, 2023! Thanks mate.
@banistersmind @mehmeh.re I just did it without an SD card using internal storage. Works fine.