Hey all.
I use a Redmi Note 3 (Snapdragon) and upto now I used CM13. I wanted to switch back to MIUI 8, as it supports LTE, so I tried to flash the MIUI ROM using TWRP. My device bricked and doesnt go past the loading screen. The bootloader also got locked and my device is also not being detected in adb command prompt. In device manager, I can only see ADB Bootloader driver but not any other. I tried installing ADB drivers again but it doesnt work. I believe I did not enable USB debugging. I have a TWRP backup of the previous ROM on my pc but is there any way to flash it?
Please help
Hi , I am new to xda and was previously viewing the posts of other users only, now I have an issue with one of my devices. I have a phicomm passion 660 in INDIA AKA Phicomm P660 in Europe.issue is the digitizer is broken ,USB debug is not enabled, ADB and Fastboot doesn't recognise the device as it appears to be issue with Google USB drivers( which is obvious due USB debug not enabled), all I want to do is use optical mouse to use the device again for DEDICATED VR VIEWING, I can boot the device to Fastboot and in normal boot the pc recognises the device as MTP, I tried steps from many other posts but since the device is not recognised by ADB , the result is ground zero,cant install cwm through sdcard due signature verification error.so any help or direction to relevant posts would be very helpful
My redmi note 3 just restarted by itself and is stuck on MI logo. Fastboot mode is working.
I tried using adb to flash a custom recovery but it says device unauthorised which is because usb debugging was not enabled on the device before it got bricked.
Any way to enable usb debugging via pc?
Any way to flash custom recovery without usb debugging enabled?
Actually I don't need the phone anymore, any way to recover the files into my pc from the device that is stuck at logo?
Answers to any of these questions would really help. Thanks in advance
I have Samsung Tab E (SM-T560NU) device and FRP got activated. I tried different methods to bypass it like: disconnecting from modem, sharing a text, OTG cable, open narrator...etc and no success. The tab device seems to have problematic USB port, I tried to connect to different machines and Windows keeps telling me that the connected device multifaceted, even though I have installed samsung usb drivers. The device has stock android installed without custom recovery. Now, is there is anyway to reset FRP? or flash rom? or install custom recovery? without using PC and with having FRP activated?
Hi,
I have a Redmi note 5, just 5 months old. Recently it fell down and the screen is completely broken. Unable to see the screen and touch is not working. I want to recover data from the phone. I was trying without any luck for past couple of days. Tried following things and none helped.
1. Connected phone to PC via USB cable, but since by default MTP is not enabled internal storage is not displayed.
2. Tried to use MI PC suit but seems like it's not supporting the Android version or MiUi version. I have Android N and MiUi 10. Tried with multiple versions of PC suit and no luck.
3. Reboot to fastboot mode : I don't have debugger option enabled, so only fastboot commands work, adb commands not working. Tried to unlock OEM, flash custom recovery etc: and nothing works! (Next time first thing I'll do with a new phone is enabling debug mode!!)
4. Tried to use Mi account to unlock bootloader but since device is not added into my acount, that also not possible.
5. Tried a bunch of softwares to cast screen to pc or control from pc , but nothing works as debugging not enabled.
I need help if anyone having any other ideas.
One way in my mind is to enable usb debugging just by using an otg keyboard. But this requires help from some one really kind.; to upload a video showing how to open settings and enable debugging only using a keyboard connected via OTG cable ( My phone is running on MiUi 10). I know it's too much to ask..but.. still..
Thank You
I'm having issue trying to unlock Pocophone F1. It is unable to detect on PC for Mi Unlock but able to install Xiaomi drivers. Any advise?
Had tried the following:
- Re-installed Xiaomi drivers
- Turn off all password and screenlock on phone
- Tried with a different usb port
- Disabled my anti-virus
Do not use ryzen !!!!
I am facing the same problem....if u come up with a solution please inform me on my Instagram (_r00hit_) i will be very thankful to u
charlestng said:
I'm having issue trying to unlock Pocophone F1. It is unable to detect on PC for Mi Unlock but able to install Xiaomi drivers. Any advise?
Had tried the following:
- Re-installed Xiaomi drivers
- Turn off all password and screenlock on phone
- Tried with a different usb port
- Disabled my anti-virus
Click to expand...
Click to collapse
Have you tried the settings icons on top right corner? You will see an option "Click to install the drive". Try that? I was having the same issue yesterday, I did that check, unplug my phone and plug it back and it worked.
naeem86 said:
Have you tried the settings icons on top right corner? You will see an option "Click to install the drive". Try that? I was having the same issue yesterday, I did that check, unplug my phone and plug it back and it worked.
Click to expand...
Click to collapse
Hi All, I am facing the same problem, I have 2 poco F1 phones. One gets detected in pc and the other one doesn't but it still recognises usb pen drives using otg cable. I have tried multiple cables. It cannot be driver issue as one phone is detected and both are on miui 12.0.3, do you think it is usb port of this phone that has issues and if it is then how come the usb otg is detected. This problem started when I did a backup of the phone to unlock it.The developer option is enabled and usb debugging is on. The service center tried replacing the usb port and still I have the same issue. They said the motherboard of the phone could have problem, but how come the phone works if motherboard has issues. Can someone please help me.
neelmanirai said:
Hi All, I am facing the same problem, I have 2 poco F1 phones. One gets detected in pc and the other one doesn't but it still recognises usb pen drives using otg cable. I have tried multiple cables. It cannot be driver issue as one phone is detected and both are on miui 12.0.3, do you think it is usb port of this phone that has issues and if it is then how come the usb otg is detected. This problem started when I did a backup of the phone to unlock it.The developer option is enabled and usb debugging is on. The service center tried replacing the usb port and still I have the same issue. They said the motherboard of the phone could have problem, but how come the phone works if motherboard has issues. Can someone please help me.
Click to expand...
Click to collapse
Check the AMD Ryzen Fastboot Fix Guide at my POCO F1 Ultimate Collection & Guide. You will also find the Fastboot drivers there and you should manually install them.
Retrial said:
Check the AMD Ryzen Fastboot Fix Guide at my POCO F1 Ultimate Collection & Guide. You will also find the Fastboot drivers there and you should manually install them.
Click to expand...
Click to collapse
Mines is intel pc
neelmanirai said:
Mines is intel pc
Click to expand...
Click to collapse
Install Fastboot drivers only then, while ur device is connected in Fastboot mode.
Retrial said:
Install Fastboot drivers only then, while ur device is connected in Fastboot mode.
Click to expand...
Click to collapse
Cool, will try that and update you.Thanks
Tried installing fastboot drivers. It still doesn't detect the poco F1. I feel it is something to do with phone settings as it recognises the other poco F1 but not the one that I want to unlock, I can't figure out. I have made sure developer option is enabled and usb debugging is on.but still cannot get the phone detected.
neelmanirai said:
Tried installing fastboot drivers. It still doesn't detect the poco F1. I feel it is something to do with phone settings as it recognises the other poco F1 but not the one that I want to unlock, I can't figure out. I have made sure developer option is enabled and usb debugging is on.but still cannot get the phone detected.
Click to expand...
Click to collapse
did you enable OEM unlock in developer options?