It all began when I was trying to transfer a file to my windows 10 Dell Laptop. I connected my phone using an original usb cable. The computer recognized the phone for a few seconds and the usb connection dialogue appeared on my phone, but then the computer said it had gotten disconnected so I had to transfer the files via Bluetooth. Since then it will only charged plugged to that computer or to a MacBook charger. It won’t recognize the original charger. It would only charge either if connected to my PCs USB port or connected to a MAcBook pro charger. I’ve tried several regular phone chargers and cables, including the original ones and they won’t work.
I thought the USB port had gotten wet because it was giving me that message when I tried plugging it to a regular Samsung charger, but when I plugged it to the Mac book charger which uses also a C Type cable it worked and the moisture detection notification disappeared.
I’ve already tried doing a soft reset and wiping out the cache...
Please advice.
Related
I'm asking for a solution to get my phone to charge via PC when phone is on. I've been troubleshooting this for days. I have a Sony Zperia Z Ultra, so the battery cannot be removed. This is what I've determined:
Phone charges when OFF and connected to PC.
Phone charges when plugged into wall.
Phone shows USB debugging is active when plugged into PC.
-If USB debugging is disabled, phone will not show any indication of being plugged in.
Phone's battery status is "not charging" when plugged into PC.
PC shows phone in device manager.
-Device manager shows yellow triangle next to phone name regardless of the PC I use (all of which previously worked fine).
-Have tried uninstalling and reinstalling drivers but all PC refuse to recognize the Sony drivers for some reason. I'm also at a loss on how to get the drivers installed properly, or how they got messed up in the first place. This happens for all PCs however. But regardless of drivers, the phone should still be able to charge once plugged in. It does not.
-If USB debugging is disabled, phone will not show up in device manager.
PC makes USB connection sound/notification when plugged in.
-If USB debugging is disabled, PC will make no sound/notification when plugged in.
PC will NOT show phone in Explorer (SD Card does not show up, nor can you navigate phone directories).
Have tried 3 different computers and laptops.
Have tried 4 different USB cables, both third-party and branded.
Have uninstalled recently installed programs (from both PC and phone).
Have tried resetting, rebooting, and hard rebooting phone.
Have tried cleaning the mini-USB port on the phone, it's nice and shiny.
Have used phone for about 6 months, problem just started happening about 2 days ago for no apparent reason, no changes were made on PCs (tried several) and especially not the phone itself.
Any ideas? I can only assume it's a phone issue from using above factors to narrow it down, however which phone factor should I focus on?
Hello all,
Honor 7,
PLK-UL00
B341 and EMUI 4.0
Android 6.0
Im unable to use my phone as USB Mass storage device. When i connect my phone to PC sometimes im getting as USB device not recognized and sometimes im not. I tried different PCs and different cables. ITs ONLY CHARGING
tried cleaning the micro usb port, uninstalling and reinstalling drivers in Pcs but it didnt work.
I switched off my phone, removed mem card, reinserted it, swithced it on again, connected my phone to PC(in sleep mode)
phone is detected as storage device and got notification in notification panel to select as charge only/files mode/ photos mode.
After ejecting and removing cable again back to issue. No detection. OTG also not detected. No Data transfers are being made but its only charging( even through Car USB port)
Anybody facing USB not recognised problem ? i hope its software related.
could anyone let me know of solution.
Thanks.
I am also facing the same issue
I thought I was alone in this issue.
Basically, my problem is, the wall charging and USB connect are reversed. i.e., I connect my wall charger, its showing as USB mode and when I connect the cable to a PC, its showing as AC Charging. I tested with Ampere app and when I connect to AC Charger, it is drawing only around 300mA(like it would do if connected to USB) and its drawing around 1.5A(like it would do when connected to wall charger) when connected to USB PC.
I have been having this issue for quite sometime and recently, I had upgraded to Marshmallow through OTA upgrade. I thought atleast this upgrade would fix this issue but I am still facing the same issue. I even contacted the customer care and nothing useful advice other than restoring to factory settings was suggested(which I tried and didn't work).
I guess it should be some software issue but don't know what it is or how to fix it. Any inputs would be welcome.
hello Forum
I own two identical LG G5 Android 8.0.0 smart phones, say A (working) and X (has issues) and several Windows 10 (1909, 20H2, 21H1) PCs.
Since today, I have the following issue with phone X:
won't fast charge anymore
is not recognized by PC/Windows anymore
To isolate the problems, I've performed the following tests:
tried 3 different USB cables to connect A to PCs
A is recognized with by every single PC/Windows
conclusion: all 3 USB cables are fine
connected A with USB cables to 2 different USB ports on each my PCs
A is recognized on every USB port
conclusion: all USB ports on my PCs are fine
connected 3 different cables to the same quick charger
A gets "fast charging"
conclusion: all 3 USB cables support fast charging
conclusion: fast charger is fine
Now the results with X, the one that has issues:
Connecting X to any USB Port and any PC with any USB-cable:
no "USB device detection" sound
no "unknown device" in Windows Device Manager
no "USB device not recognized" in Notification Center
Connecting X to the quick charger with any cable I get only a normal charging behavior even though the battery level is below 80%.
Well, luckily I own two identical phones, so I swapped the whole battery/charger module but interestingly exactly same behavior:
A wird erkannt, aber X nicht
A still gets detected by Windows
A still can fast charge
X won't get detected by Windows
X won't fast charge
Conclusion: the LG G5 Charger Module and thus the LG G5 USB-C-Ports are fine
I've also connected an OTG-USB-socket to my X and in it a USB flash drive and guess what: I can read the USB flash drive via USB-C port flawlessly!
IMHO something else is wrong with X which has nothing to do with cable, LG USB-C port, PC USB ports, Windows version.
I did not install any Apps during the night as I have automatic app updates disabled.
What could the issue be?
What else could I try besides:
rebooting without SIM card
rebooting without SD card
rebooting in Safe Mode
turn off, leave it off for an hour, turn it on
I did of course not factory reset X! This is the last thing I want to try.
i'm totally clueless
AHsis
StehtimSChilf said:
hello Forum
I own two identical LG G5 Android 8.0.0 smart phones, say A (working) and X (has issues) and several Windows 10 (1909, 20H2, 21H1) PCs.
Since today, I have the following issue with phone X:
won't fast charge anymore
is not recognized by PC/Windows anymore
To isolate the problems, I've performed the following tests:
tried 3 different USB cables to connect A to PCs
A is recognized with by every single PC/Windows
conclusion: all 3 USB cables are fine
connected A with USB cables to 2 different USB ports on each my PCs
A is recognized on every USB port
conclusion: all USB ports on my PCs are fine
connected 3 different cables to the same quick charger
A gets "fast charging"
conclusion: all 3 USB cables support fast charging
conclusion: fast charger is fine
Now the results with X, the one that has issues:
Connecting X to any USB Port and any PC with any USB-cable:
no "USB device detection" sound
no "unknown device" in Windows Device Manager
no "USB device not recognized" in Notification Center
Connecting X to the quick charger with any cable I get only a normal charging behavior even though the battery level is below 80%.
Well, luckily I own two identical phones, so I swapped the whole battery/charger module but interestingly exactly same behavior:
A wird erkannt, aber X nicht
A still gets detected by Windows
A still can fast charge
X won't get detected by Windows
X won't fast charge
Conclusion: the LG G5 Charger Module and thus the LG G5 USB-C-Ports are fine
I've also connected an OTG-USB-socket to my X and in it a USB flash drive and guess what: I can read the USB flash drive via USB-C port flawlessly!
IMHO something else is wrong with X which has nothing to do with cable, LG USB-C port, PC USB ports, Windows version.
I did not install any Apps during the night as I have automatic app updates disabled.
What could the issue be?
What else could I try besides:
rebooting without SIM card
rebooting without SD card
rebooting in Safe Mode
turn off, leave it off for an hour, turn it on
I did of course not factory reset X! This is the last thing I want to try.
i'm totally clueless
AHsis
Click to expand...
Click to collapse
Dude you got any fix????
Exact Same things are happening to My LG-G5 toady..... No idea what to do now.....
No unfortunately not!
What I did, was creating a backup with LG Backup App, additionally copied all the data (never trust the rabbit) onto my microSD card, then removed the microSD card from the device and copied the data to my PC to have an actual backup! I still haven't factory reset my device, as I hate to install and setup every app again.
If you do a factory reset or reinstall a new firmware, please let us know, if that helped!
thanx
SAME PROBLEM HERE!!! FACTORY RESET DIDN'T HELP, ANY SOLUTION??? THX!!!!!!!!
StehtimSChilf said:
No unfortunately not!
What I did, was creating a backup with LG Backup App, additionally copied all the data (never trust the rabbit) onto my microSD card, then removed the microSD card from the device and copied the data to my PC to have an actual backup! I still haven't factory reset my device, as I hate to install and setup every app again.
If you do a factory reset or reinstall a new firmware, please let us know, if that helped!
thanx
Click to expand...
Click to collapse
Guys, i got mine fixed by repairing of charging port
How???????
Yesterday I had my Mi 11 Lite delivered. After setting up the SIM card and so on, I tried to connect it to my Windows PC to copy the photographs that didn't migrate during the device transfer procedure.
Plugged it into the PC, it failed to appear in file manager. It started to charge, but wouldn't connect otherwise. Tried all the usual of setting the default USB, turning on USB debugging, nothing. Tried various different USB sockets, USB hub, nothing. Getting very frustrated, I was thinking I would return it for a refund. By this time it had downloaded an update and requested a restart. As it restarted, it was plugged into a USB port and once I unlocked it, hurrah! It connected. I then copied over the pictures. Happy days.
A little later I re-connected it to the PC and again, nothing. I installed the Xiaomi connection suite and it complained that there was no device connected. Eventually I installed Smartisan's wonderful Handshaker which creates a WiFi connection and copied over some files using it. I was still annoyed though. This morning I thought I would try connecting using my Laptop. No connection there either. I tried a USB OTG flash drive, it wouldn't work. Thinking I really would have to return the 'phone, I rebooted it. When it restarted, I plugged the USB OTG drive in and this time it appeared. Plugged the 'phone into the PC, nothing. Plugged the OTG drive back in, nothing again. Rebooted it once more, USB OTG worked. Thinking I was starting to go crazy, a thought suddenly struck me.
When I had plugged it into the PC the very first time, I had plugged it into a USB-C port on the PC. When it restarted, it was plugged into a USB-A socket as that was the last port I had tried. As the USB-A port had worked, I had then tried the USB-C port, which didn't work and after that nothing connected to the 'phone worked.
My PC is a Lenovo all in one which should allow use of the screen and keyboard to be shared with a mobile device when plugged into the PC's USB-C port. My guess is that the PC is trying to connect to the Mi 11 Lite, offering to share the screen and keyboard which then confuses the 'phone and blocks all access to the USB on the 'phone until it is rebooted. Since I have avoided using the USB-C port on the Lenovo PC to connect to the 'phone, it has worked perfectly well.
Steps to try if your 'phone won't connect to the PC:
Unplug all cables from the 'phone and reboot it.
Make sure that the USB-C cable is removed from the PC.
Plug a USB-A to USB-C cable into a USB-A port on the PC.
When the 'phone has restarted, unlock it.
Plug the USB-C end of the cable into the 'phone.
I should add that I have been using the USB-C port on the Lenovo for all my other 'phones, including a Mi Mix 2S, TCL 10, Carbon Mobile and a Teclast Tablet and all have been fine. Only the Mi 11 Lite has not worked as expected.
I hope this helps someone. It may just be something that is specific only to the Lenovo PC and the Mi 11 Lite 5G combination, but it has had me baffled for hours!
I have the same problem, I would try your solution but my Asus laptop doesn't have a USB-A but only 2 USB-C ports and no way it connects. It works ok with my pc which has an USB-A port.
So I think there's no solution for me?
Also I have another
I have an issue with Bluetooth, it doesn't automatically connect to paired devices like my car (most importantly), speaker or laptop. First I thought it was the car but since it doesn't auto connect to other devices it must be the phone(s)
I have searched for a solution on Internet but couldn't find a fix. BTW same problem on my Poco F2 pro and Oppo X2pro. All are global rom.
Has anyone a solution for this problem?
I have tried repeatedly to connect my phone to my PC (Windows 11) without any luck. Normally I would expect that just connecting the USB cable would be enough but no (I have 2 identical phones). I can connect through bluetooth and transfer files without issue. I have installed this driver as I thought being a new phone it may need a new driver still no luck. I tested the cable on my old LG phone and I can connect and transfer, I also tested the cable that came with the phone. The phone is the Chinese model with that MIUI. The phone does nothing except recharge when connected and it does not appear in windows. I have enabled USB debugging. Anyone have any idea what the problem is?
After repeating the whole exercise it appears I may have had a faulty USB A to USB C converter connected to my PC (newish case). Works sometimes, sometimes not. Using a USB A at the back of the PC now faithfully connects and solves the problem.