edl mi 8 lite authentication - Xiaomi Mi 8 Lite Questions & Answers

good night guys
i have a big problem on my mi 8 lite when i try to go to stock rom by mi flash with my mobile phone in edl mode mi flash is asking for an authorization of edl mode
I was wondering if there is any way to go to stock rom without needing this check?
I will be very grateful if someone can help me

i friends.
i also looking for solution for this. i bricked my mi 8 lite.
can anybody help me with this edl auth?

welcome to the club. i have a nice mi 8 lite also needing edl flash.

MOD EDIT: Quote removed
Second one is not something that would fix my issue. I have a corrupted partition table. Only fix is edl flash which rewrites more than fastboot. I will look into MOD EDIT: Quote removedwhen I have some free time. Thank you for the information. Very appreciated.

So. Last night I got my Mi8 Lite bricked when flashing the latest Global MIUI11.
After hours and hours of research, I found that I needed an authenticaded Mi Account to be able to flash the system in the right way, but doing the right things, It can be done with no trouble.
My original stock rom was chinese, but seller sold me saying it was Global, so to get the phone working back, I needed to flash the Chinese stock first, then unlock the bootloader, then finally flash the global rom.
Keep this in mind, to get global rom working, the bootloader NEEDS to be unlocked, otherwise it will say "THIS MIUI VERSION CAN'T BE INSTALLED ON THIS DEVICE" and wont boot.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
But if you are here, it means that you are already seeing this message, so let's begin.
Download the .elf file and put it on the chinese rom folder "platina_images_VXX.XX.XX > images"
Now you need to set the phone on EDL mode
The way I did was, opening the phone and doing a jumper on the board while plugging the USB cable
If you did the same as me, now your device manager has to look like this.
With everything set, you now can flash the Chinese stock rom normally with the Mi Flash software. If you previously had an Mi Account it will ask for your password. Type the pass, set the phone and after that, go to developer settings, "unlock status" and link your device account with the device.
Now, download the Mi Unlock software, plug the phone on USB and do whatever the software tells you to do.
If everything went fine and the phone is unlocked, drop the downloaded .elf file in the global rom folder "platina_global_images'VXX.XX.XX > images" and flash the Global Rom.
NOW PAY ATTENTION, ON THE RIGHT BOTTOM THERE'S THREE OPTIONS. DO NOT SELECT "clean flash and lock", ALWAYS SELECT "CLEAN FLASH".
If worked, click thanks, if you still have some doubt, or misunderstood something tell me.
Sorry if I wrote something wrong, english isn't my main language
Mi Flash: https://mi-globe.com/download-xiaomi-mi-flash-tool-all-versions/
Mi Unlock: https://xiaomitools.com/mi-unlock-tool/

The easy way to flash mi 8 lite without authentication - no authentication needed
youtube.com/watch?v=pAVqt8ZDYUI

tarkusy said:
The easy way to flash mi 8 lite without authentication - no authentication needed
youtube.com/watch?v=pAVqt8ZDYUI
Click to expand...
Click to collapse
Didn't check the link but most of the ones I have seen are fake junk that at best doesn't work. Many contain spyware, malware, and/or viruses. If it isn't here on xda or another trusted site I would be cautious.

viniman1712 said:
good night guys
i have a big problem on my mi 8 lite when i try to go to stock rom by mi flash with my mobile phone in edl mode mi flash is asking for an authorization of edl mode
I was wondering if there is any way to go to stock rom without needing this check?
I will be very grateful if someone can help me
Click to expand...
Click to collapse
Twrp doesn't flash stock rom?!
.

cidxtc said:
Didn't check the link but most of the ones I have seen are fake junk that at best doesn't work. Many contain spyware, malware, and/or viruses. If it isn't here on xda or another trusted site I would be cautious.
Click to expand...
Click to collapse
this is not fake. don't say what you don't know. it's real and tested % working. it's only logic. The file firehose what you need to bypass the authentication. I replaced the original firehose file by the one I have and then it bypassed the authentication. this is a method for real no spoayware or fake. check the link it's just a video on youtube that shows how it's done.
---------- Post added at 02:59 PM ---------- Previous post was at 02:57 PM ----------
persona78 said:
Twrp doesn't flash stock rom?!
.
Click to expand...
Click to collapse
to flash mi 8 lite, replace the original firehose file by the one I provided in my video. Don't worry. it worked. I've been searching for the right way for couple days.

totally not fake junk. Well tested and it's 100% working.
Mi 8 Lite Bypass Account Authorized Official Flashing
Xiaomi Mi 8 Lite Firmware Flashing Without Authentification. edl mi 8 lite authentication.Xiaomi Mi 8 Lite (Platina) Firehose File [No Need Auth]...
learnandsharegsm.blogspot.com

tarkusy said:
totally not fake junk. Well tested and it's 100% working.
Mi 8 Lite Bypass Account Authorized Official Flashing
Xiaomi Mi 8 Lite Firmware Flashing Without Authentification. edl mi 8 lite authentication.Xiaomi Mi 8 Lite (Platina) Firehose File [No Need Auth]...
learnandsharegsm.blogspot.com
Click to expand...
Click to collapse
День добрый всем ! Может конечно хлам этот ваш и рабочий и протестирован , но я уже 30 минут уже пытаюсь скачать этот хлам , устав закрывать левые страницы , ссылки , рекламу, отрубать предупреждения антивирусника, в ожидании проверки-прогрузки ссылки , чтобы хотя бы скачать этот хлам !!! на данный момент полчаса сижу сам с собой вслух матерюсь и ругаюсь на то , как удобно расположили вы ссылку на этот ваш хлам !!!! не поленился даже зарегистрироваться , чтоб донести вам свои эмоции на данный момент !!!! если ничего не добавлю здесь больше - значит хлам все таки скачал !!!! если нет - обязательно допишу свое мнение об этой выложенной с хорошими (надеюсь ) намерениями этой ссылкой !!!
)))) По итогу : почти час потраченного времени ушло на то , чтобы я наконец то добрался до файлового хранилища https://www.file4.net/404 ГДЕ МНЕ СООБЩИЛИ ЧТО ДАННЫЙ ФАЙЛ УДАЛЕН ИЛИ ОТСУТСТВУЕТ !!! ))) КОГДА Я ВЫШЕ ПИСАЛ ПРО ВАШИ НАМЕРЕНИЯ С КОТОРЫМИ ВЫ ВЫЛОЖИЛИ ДАННУЮ ССЫЛКУ , ФРАЗУ " С ХОРОШИМИ НАМЕРЕНИЯМИ " - ВСЕ ТАКИ НУЖНО БЫЛО НАПИСАТЬ В КАВЫЧКАХ !!!! Спасибо вам за хлам , муссор , вирусняки и бесцельно потраченный час моего времени !!! Это мое личное мнение о вашей ссылке , я могу и ошибаться , но мой опыт добраться до ваших файлов - был таким !!!
----------
MOD EDIT: English Translation Below
Good day everyone! Maybe, of course, this rubbish is yours and working and tested, but I have been trying to download this rubbish for 30 minutes already, tired of closing left pages, links, ads, chopping off antivirus warnings, waiting for the link to be checked-loaded in order to at least download this rubbish !!! at the moment I’m sitting with myself for half an hour, swearing aloud and swearing at how conveniently you placed the link to this trash of yours !!!! I was not too lazy even to register in order to convey my emotions to you at the moment !!!! if I don’t add anything else here, then it’s trash all the same downloaded !!!! if not, I will definitely add my opinion about this link posted with good (I hope) intentions !!!
)))) As a result: it took almost an hour of wasted time for me to finally get to the file storage https://www.file4.net/404 WHERE I WAS INFORMED THAT THIS FILE IS DELETED OR MISSING !!! ))) WHEN I WROTE ABOVE ABOUT YOUR INTENTIONS WITH WHICH YOU POSTED THIS LINK, THE PHRASE "WITH GOOD INTENTIONS" - IT SHOULD HAVE BEEN WRITTEN IN QUOTATION MARKS!!!! Thank you for the trash, garbage, viruses and wasted an hour of my time!!! This is my personal opinion about your link, I may be wrong, but my experience of getting to your files has been so !!!

Related

[NEW]WM6.1 for HTC P3400 Vista Design WWE (b20270)

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
English:
Here also has appeared in time new билд for ours Gene....
That the new:
- The new loader (XIP)
- Completely new Build (20270)
- By itself new design (Vista)
Distinctions with off an insertion:
[*]Are removed:
PowerPoint
Catalog
WellcomCenter
The inquiry
Search (standard)
Added:
psShutXP (prompt on deenergizing)
WM5torage
Advanced Config (thin system options)
ROMSettings (adjustment CommManagera)
By itself the big menus
Pocket RAR (3.71)
SoftKey
PIMBackup (2.8)
MP3 Trimmer
Java
ConnectionSetup (to Ukraine of options still is not present)
In total added software weighs 4,1 metres...
Lacks: the password does not work!
Advantages: works faster and more stably!
We take away on a site:
Code:
http://xwarez.ru/download.php?view.1855
Thanks:
2Misar&Bepe for their excellent utilities for an insertion
2Orefkov for work on Gene's iron
2poorlyduck - For its design under whist
2stratmor&Crbrus - For the help with it and previous builds
RUSSIAN:
Что нового:
- новый загрузчик(XIP)
- полностью новый билд(20270)
- само собой новый дизайн(Vista)
Различия с офф прошивкой:
Удалены:
PowerPoint
Catalog
WellcomCenter
Справка
Поиск(стандартный)
Добавленны:
psShutXP(заставка на выключение)
WM5torage
Advanced Config(тонкие системные настройки)
ROMSettings(настройка CommManagera)
Само собой большие менюшки
Pocket RAR(3.71)
SoftKey
PIMBackup(2.8)
MP3 Trimmer
Java
ConnectionSetup(на Украину настроек все еще нет)
в общей сложности добавленный софт весит 4,1 метра...
Недостатки не дорисованны русские кнопки диалера, не работает пароль!
Преимущества: работает быстрее и стабильнее!
забираем на сайте:
Code:
http://xwarez.ru/download.php?view.1855
Благодарности:
2Misar&Bepe за их отличные утилиты для прошивки
2Orefkov за работу над железом Жени
2poorlyduck- за его дизайн под висту
2stratmor&Crbrus- за непосьльную помощь с этим и предыдущими билдами
it loooks very very nice, thank you thank you thank you......
Rgds
ZD
I'm unable to download from that link could someone please upload it elsewhere? Say yousendit.com sharebee.com etc ?
chayn said:
English:
Here also has appeared in time new билд for ours Gene....
That the new:
- The new loader (XIP)
- Completely new Build (20270)
- By itself new design (Vista)
Distinctions with off an insertion:
[*]Are removed:
PowerPoint
Catalog
WellcomCenter
The inquiry
Search (standard)
Added:
psShutXP (prompt on deenergizing)
WM5torage
Advanced Config (thin system options)
ROMSettings (adjustment CommManagera)
By itself the big menus
Pocket RAR (3.71)
SoftKey
PIMBackup (2.8)
MP3 Trimmer
Java
ConnectionSetup (to Ukraine of options still is not present)
In total added software weighs 4,1 metres...
Lacks: the password does not work!
Advantages: works faster and more stably!
We take away on a site:
Code:
http://xwarez.ru/download.php? view.1855
Thanks:
2Misar&Bepe for their excellent utilities for an insertion
2Orefkov for work on Gene's iron
2poorlyduck - For its design under whist
2stratmor&Crbrus - For the help with it and previous builds
RUSSIAN:
Что нового:
- новый загрузчик(XIP)
- полностью новый билд(20270)
- само собой новый дизайн(Vista)
Различия с офф прошивкой:
Удалены:
PowerPoint
Catalog
WellcomCenter
Справка
Поиск(стандартный)
Добавленны:
psShutXP(заставка на выключение)
WM5torage
Advanced Config(тонкие системные настройки)
ROMSettings(настройка CommManagera)
Само собой большие менюшки
Pocket RAR(3.71)
SoftKey
PIMBackup(2.8)
MP3 Trimmer
Java
ConnectionSetup(на Украину настроек все еще нет)
в общей сложности добавленный софт весит 4,1 метра...
Недостатки не дорисованны русские кнопки диалера, не работает пароль!
Преимущества: работает быстрее и стабильнее!
забираем на сайте:
Code:
http://xwarez.ru/download.php?view.1855
Благодарности:
2Misar&Bepe за их отличные утилиты для прошивки
2Orefkov за работу над железом Жени
2poorlyduck- за его дизайн под висту
2stratmor&Crbrus- за непосьльную помощь с этим и предыдущими билдами
Click to expand...
Click to collapse
Friend, check the web site link before posting. your posting link is:-
http://xwarez.ru/download.php? view.1855
But, it won't work, as you mention there "Extra Space". the actual link is:-
http://xwarez.ru/download.php?view.1855
However, its really great look, but try solve the problem regarding Password Protection.
thanks.
Friend,
it's the Diamond ROM with new look, nothing else. Isn't so! But, Chayn Really great thing. Plz, try to solve the problem regarding Password Protection as it is essential to us.
What's about the X-peria ROM? think you will update soon as possible.....
Have a Great Day.....
lionkng123 said:
Friend,
it's the Diamond ROM with new look, nothing else.
Click to expand...
Click to collapse
are you can read and look?
if you don't no abowt ROM nothing... just don't write....
Good job buddy
but some thing is lacking in this Rom... i don find it very stable .... Any ways i will be waiting for more updates from you ..
It's true
chayn said:
are you can read and look?
if you don't no abowt ROM nothing... just don't write....
Click to expand...
Click to collapse
yeh, i haven't any idea bout ROM, its upgradation process etc etc..... i just depend on the XDA Developers for upgradation. I yet not try to insult you Friend. I quote what I think and feel bout the new ROM.
Waiting for your next upgradation.............
Thanks.........
Certficates
Chayn will personalised corporate certificates work in this one .. have you checked about it
bryangopan said:
Chayn will personalised corporate certificates work in this one .. have you checked about it
Click to expand...
Click to collapse
yeh. hav already checked it out. however, as i mentioned earlier, i havn't ne knowledge bout ROM upgrading or etc. I hav customized Fusion7.5, and now all the thing is going smooth, without ne problem. Battery backup is also for 4-5 days.
Regards.
tnx ..it's looks nice..works nice
vista LOOKS NOT GOOD, I THINK....
I LIKE PURE GREY HTC HOME
THANKS ANYHOW, THANKS YOUR GREAT WORK....
'CAN YOU MAKE B20273 FOR GREY OR BLUE, OR GREEN HTC HOME?
zh.dayong said:
vista LOOKS NOT GOOD, I THINK....
I LIKE PURE GREY HTC HOME
THANKS ANYHOW, THANKS YOUR GREAT WORK....
'CAN YOU MAKE B20273 FOR GREY OR BLUE, OR GREEN HTC HOME?
Click to expand...
Click to collapse
i think in blue beter....
i will do thet with a next build....
Problems
First of all, THANKS for such a beautiful and functional ROM.
A few things need your attention:
Java not working properly.(Update it to v3.1)
SmartDial is also not fully functional.It fails to recognize numbers(this is a major drawback) and is slow.
Otherwise I appreciate your ROMs.U know how to cook them, for sure.
Could u plz tell reg hack to disable Enlarge Menu.
Thanks once again.....
rex4u said:
First of all, THANKS
Java not working properly.(Update it to v3.1)
SmartDial is also not fully functional.It fails to recognize numbers(this is a major drawback) and is slow.
Could u plz tell reg hack to disable Enlarge Menu.
Click to expand...
Click to collapse
for large menu look here in first post
java i will fixing.... but you can download any java-machine
SmartDial- i will look at that program....
rex4u said:
First of all, THANKS for such a beautiful and functional ROM.
A few things need your attention:
Java not working properly.(Update it to v3.1)
SmartDial is also not fully functional.It fails to recognize numbers(this is a major drawback) and is slow.
Otherwise I appreciate your ROMs.U know how to cook them, for sure.
Could u plz tell reg hack to disable Enlarge Menu.
Thanks once again.....
Click to expand...
Click to collapse
i dont like large menu also,
pls kindly add:
HTC Home, Blue its nice
HTC Album landscape
Pimbackup.
WM5torage
Pocket RAR
Adobe reader
WKtask
Esmertec Java
Clear type
This is what i really love...
pls also do the same like FInixnover for P3600 rom use B20273
thank you so much, you are great man
HTC Home 2.1
dotnetCF 3.5 RTM )
Total Commander 2.50
WM5torage
HTC TaskManager_2_1_34077_100
BatteryStatusExt_1.05.141 build 0324
PPCPimBackup 2.8
TaskMgr v3.1
PocketRAR3.71
HTC ConnectionSetup 1_0_31758_1
HTC_AudioManager_1_2_18133129_q
AdobePDF_2_5_103000_60R2
Arcsoft_MMS_5_0_31_19
Commanager_original p3400i
Smart_dialer_new
Esmertec JbedJava_0_0_20080318_2_1
HTC StreamingMedia_3_00_17201121_00
HTC Album_1_0_1030_720
WindowsLive
http://forum.xda-developers.com/showthread.php?t=413612
pls try this style, very nice,,... many people like this rom ...20273
zh.dayong said:
http://forum.xda-developers.com/showthread.php?t=413612
pls try this style, very nice,,... many people like this rom ...20273
Click to expand...
Click to collapse
i have Vista rom in blue....as rom on the screenshote...
but i don't want add other software....
if you wan't i can give it to you, but you don't finde there anything interesting
this rom is good!
but i found out that the calender isn't working in this ROM. so, guys do u have any solution for this?

[TOOL] SRK Tool Huawei Bootloader/ROOT/Recovery/Backup/Utility (STABLE - 20160521)

Hi all,
I'm from Thailand. I made SRK Tool for LG G2 and G3[TOOL] SRK Tool 2.1 [ROOT/UNBRICK/UTILITY/BACKUP]- 20150507 and now I'm a new user for Huawei forum. I'm planing to develop my SRK Tool for Huawei phone, and this is a first look
STABLE 1.0 - 20160521
- Fixed Root and support only Mate7,8,Honor6,6+,7,7+,P9
- Fixed Backup oeminfo
- Add TWRP for Honor7,7+
- Add Utility Bootloader status checking
- Add Utility Reboot to erecovery
- Add Utility dumpsys deviceidle disable (Disable Doze)
- Add Utility dumpsys deviceidle enable (Enable Doze)
- Add Utility Changing oeminfo and custom.bin (Huawei Mate8)
- Add Utility Changing oeminfo and custom.bin (Huawei Mate7)
- Add Restore oeminfo and custom.bin(Can apply for install oeminfo and custom.bin
for all Huawei Phone)
- Optimize size of tool
Beta 04.10 - 20160507
- Add install TWRP Huawei P9
Beta 04 - 20160507
- Fixed Root
- change backup oeminfo.img to oeminfo
Beta 03 - 20160504
- Add root support All huawei phone
- Add install TWRP honor6+
- Add backup oeminfo/custom.bin
- Add Utility/List all partition in huawei device
Beta 02 - 20160501
- Add How to enable USB Debugging
- Add Huawei Driver (Install Hisute)
- Add Install Recovery for Mate7,Mate8 Stock and TWRP Recovery for Marshmallow
Beta 01 - 20160429
- initial version
- Unlock bootloader
- Relock bootloader
- Utility
1. Exit FASTBOOT AND RESCUE MODE
2. Reboot to Recovery
3. Reboot to Bootloader
XDA:DevDB Information
SRK Tool Huawei, Tool/Utility for the Huawei Honor 7
Contributors
somboons
Version Information
Status: Stable
Current Stable Version: 1
Stable Release Date: 2016-05-21
Created 2016-05-21
Last Updated 2016-05-21
Download link :
STABLE V1.0 - 20160521
SRKToolHuawei-STABLE-V1.0-20160521 : https://www.androidfilehost.com/?fid=24549084345926497
Beta 0410 - 20160507
SRKToolHuawei-beta-0410_20160507.zip : https://www.androidfilehost.com/?fid=24533100289590226
Beta 04 - 20160507
SRKToolHuawei-beta-04_20160507.zip : https://www.androidfilehost.com/?fid=24533100289590184
Beta 03 - 20160504
SRKToolHuawei-beta-03_20160504.zip: https://www.androidfilehost.com/?fid=24533100289589594
Beta 02 - 20160501
SRKToolHuawei-beta-02_20160501.zip: https://www.androidfilehost.com/?fid=4996503000517181806
Beta 01 - 20160429
SRKToolHuawei-beta-01_20160429.zip: https://www.androidfilehost.com/?fid=4996503000517181613
VDO How to
Screenshot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
interesting!
did you see this? -> http://forum.xda-developers.com/honor-7/general/honor-7-multi-tool-t3281176
nice work man!
non-toxic said:
interesting!
did you see this? -> http://forum.xda-developers.com/honor-7/general/honor-7-multi-tool-t3281176
Click to expand...
Click to collapse
Sure!. nice tool.
I would like to add change oeminfo and custom.bin for honor7 , anyone who can help me backup it with my tool then send to me .
somboons said:
I would like to add change oeminfo and custom.bin for honor7 , anyone who can help me backup it with my tool then send to me .
Click to expand...
Click to collapse
I can! View attachment oeminfo.zip
hw/eu
Do you know our vendor id's? (see my tool)
inside!out said:
I can! View attachment 3759786
hw/eu
Do you know our vendor id's? (see my tool)
Click to expand...
Click to collapse
Thank you. I am new huawei user , if you have any recommendations please tell me. I will learn from you.
Sent from my HUAWEI NXT-L29 using Tapatalk
deleted because not longer required
inside!out said:
My Honor 7 Multi-Tool is pure knowlege for u
Why was it necessary to repeat the functionality of the existing tools? Moreover partially. Why do I need to download 200MB of unnecessary information (why you do not want to implement downloading from the cloud server)?
Click to expand...
Click to collapse
Is it worth downloading? Or should I stick with Multi-Tool?
DigiGoon said:
Is it worth downloading? Or should I stick with Multi-Tool?
Click to expand...
Click to collapse
depends on your satisfaction. Multi-Tool is good.
Sent from my HUAWEI NXT-L29 using Tapatalk
Thanks for that great job, but is compatible with Mate 8 - L09?
jvelex said:
Thanks for that great job, but is compatible with Mate 8 - L09?
Click to expand...
Click to collapse
sure
Sent from my HUAWEI NXT-L29 using Tapatalk
Thread cleaned of the unauthorised posting of others work!
Matt
matt4321 said:
Thread cleaned of the unauthorised posting of others work!
Matt
Click to expand...
Click to collapse
Thank you
Sent from my HUAWEI NXT-L29 using Tapatalk
What is Honor 7+ model?
Отправлено с моего PLK-L01 через Tapatalk
inside!out said:
What is Honor 7+ model?
Click to expand...
Click to collapse
i have found this information -> http://news.softpedia.com/news/huaw...cta-core-cpu-3gb-ram-13mp-camera-498269.shtml
non-toxic said:
i have found this information -> http://news.softpedia.com/news/huaw...cta-core-cpu-3gb-ram-13mp-camera-498269.shtml
Click to expand...
Click to collapse
[emoji38] , its leak! KIW-model is Honor 5X on snapgragon 616
There is only honor 7i - shotX, it works on snapdragon 616 too. ATH-MODEL
Отправлено с моего PLK-L01 через Tapatalk
I try to integrate script find all new firmware of huawei maybe next build if working
Sent from my HUAWEI NXT-L29 using Tapatalk
This works for me.
Earlier, i was using Multi Tool and unable to install TWRP.
By using your's, it works for me and successfully install TWRP
But your tool's seems not fit with mine when I select the Root function.
So, thanks to you, I use 2 different method.
1. Install TWRP using your tool - successful
2. Root using Multi-Tool - successful (need to select root for Honor 7, android 5.0 ver)
I am so happy now. feels like want to by everyone here a coffee!
Thank you Sir!:good:
Cheers!

[GUIDE] Unbrick Guide for Lenovo Z5 Pro GT [L78032/Stock Firmware/BootLoop Fix]

This tutorial is based on the Lenovo Z5 Pro(L78031 - NO-GT version) tutorial By BadCluster
.Features
- Unbrick
- BootLoop Fix
- Stock Rom
- Stock Firmware
- Stock Recovery
- System as new as factory
Note: This tutorial will remove all your internal files
Note: This tutorial does not lock your bootloader if you have unlocked
Note: his tutorial only works with ah version 2.0.1.0 of Qualcomm Flash Image Loader (QFIL), so if it does not work with you check your version of Qualcomm Flash Image Loader (QFIL)
1) Download Firmware: Here
2) Download and Install Qualcomm Flash Image Loader (QFIL) 2.0.1.0: QPST.WIN.2.7.451.2.zip
3) Download and install Qualcomm Driver: For Windows 32 Bit - For Windows 64 Bit
4) Turn off your smartphone
5) Follow this Steps:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Look for the program "QFIL" and run it.
Now, Press all two buttons at the same time vol+ and vol- and connect the cable USB to the phone and quickly press Download Content button!
Note: If you click the Download Content button and then the "Sahara Error" error occurs because you did not click the button quickly. then shut down your smartphone and try again.
Done!
Could anybody confirm this is working ?
Thank you so much for the tutorial. Works fine!
Anyone have a Global Rom? My device came with Global Rom but I bricked it. After flashing there is only chinese and english language.
Hola a todos ya flashee la rom china pero tengo un problema desaparecio el wifi y el sim no me detecta ninguno de los 2
Can someone who flashed original ZUI using this method confirm what score you get in Antutu ? The generic global ROM benchmark is abysmal (~360000 but should be >430000). Fortunately this device has plenty of horsepower that even with 20%+ performance hit it still feels snappy.
Alguém fez e deu certo?
delete
miji2 said:
Can someone who flashed original ZUI using this method confirm what score you get in Antutu ? The generic global ROM benchmark is abysmal (~360000 but should be >430000). Fortunately this device has plenty of horsepower that even with 20%+ performance hit it still feels snappy.
Click to expand...
Click to collapse
'Confirmed', with a treble enabled asop i only get 340000, so even less than yours.
https://forum.xda-developers.com/pr...velopment/aosp-10-0-quack-phh-treble-t3992559
So there seems to be a great loss from the expected, does anyone know what the score is on a original rom?
miji2 said:
Can someone who flashed original ZUI using this method confirm what score you get in Antutu ? The generic global ROM benchmark is abysmal (~360000 but should be >430000). Fortunately this device has plenty of horsepower that even with 20%+ performance hit it still feels snappy.
Click to expand...
Click to collapse
This should answer your question pal
Flashed the China rom, ZUI 11
It is stated by op that this tutorial is for z5 pro NO-GT..but the last posts are about the z5 pro GT ... right? Confused
Henkl said:
It is stated by op that this tutorial is for z5 pro NO-GT..but the last posts are about the z5 pro GT ... right? Confused
Click to expand...
Click to collapse
This method works for z5, z5s, z5 pro/gt all the way to z6 lite and z6 pro. The only difference is that you use a different firmware, specific to your phone model.
Vleenity said:
This should answer your question pal
Flashed the China rom, ZUI 11
Click to expand...
Click to collapse
You rock! Thank you.
Vleenity said:
This method works for z5, z5s, z5 pro/gt all the way to z6 lite and z6 pro. The only difference is that you use a different firmware, specific to your phone model.
Click to expand...
Click to collapse
L78032 firmware is for z5 gt pro?
Henkl said:
L78032 firmware is for z5 gt pro?
Click to expand...
Click to collapse
Yes, that's correct.
miji2 said:
You rock! Thank you.
Click to expand...
Click to collapse
Pretty big firmware/roms ...3,1gb.. wow
Henkl said:
It is stated by op that this tutorial is for z5 pro NO-GT..but the last posts are about the z5 pro GT ... right? Confused
Click to expand...
Click to collapse
No.
The tutorial is based on the z5 pro tutorial, but for the z5 pro gt
Hi, I followed the steps but can't update to zui 11 and install gapps. Bootloader is still unlocked. Fastboot oem lock doesnt work allthough the device is seen in fastboot devices.
Sent from my HMA-L29 using Tapatalk
Vleenity said:
This should answer your question pal
Flashed the China rom, ZUI 11
Click to expand...
Click to collapse
.It is the same. No issues doing recovery however notes as follows
a) you have to extract the firmware file
b) you have to build both flat and meta types
c) remember your path selection file save to. quite auto once you click the browse button
d) at flat build - load XML - i choose rawprogram1.xml. ny files as mine file did not show rawprogram0.xml.
about tweak recovery..
https://forum.xda-developers.com/showpost.php?p=81190991&postcount=17
about backup
best to back up via OTA-USB. pixel GCI crash ( QUALCOMM CRASH DUMP MODE ) my phone and my restore file was missing as TWRP rename the restore file. spent one hour it so decide to do stock rom
my vendors antutu hovers around 300000 - 350000. after stock it is 405000 to 418000.
so confusing : (
I've done flashing to China ROM but how can I get into zui 11? I cant update to zui 11 coz it says my system has been rooted and cant provide to the latest version. even though my device wasn't rooted, pls help...

Transpeed X3 plus bricked - stock firmware

Hello everyone,
I've bought on Aliexpress the Transpeed X3 Plus, it comes bricked with no response on display and on HDMI signal.
The vendor sent me the stock firmware image, that i flashed via USBBurningTool.
It worked for like one week with bad performance, and then it comes stucked on the boot logo...
I tried to reflash some firmware that i found on the web with no luck, and seller now won't responde to my emails.
Can anyone help me please?
Do you have original or (better) a custom firmware to load?
It is my first experience with android box, and i don't know how they work.
Thank you all
my transpeef x3 plus ta got stuck on the boot screen. 4gb ram 32gb rom stock is there firmware
Up
If you have a box with encrypted firmware (like this : franklin-userdeburg 9 PPR1.180610.011.20200311 / PPR1.180610.011.20200425) then there is a special procedure that you may have to follow to fix it. I guess since you already bricked it, you cannot see this information.
Try whatever you think is suitable and if you want I can tell you what to do if you want to try it. At least you can get the information from your supplier (Aliexpress) if your box has an encrypted firmware or not.
ath156 said:
If you have a box with encrypted firmware (like this : franklin-userdeburg 9 PPR1.180610.011.20200311 / PPR1.180610.011.20200425) then there is a special procedure that you may have to follow to fix it. I guess since you already bricked it, you cannot see this information.
Try whatever you think is suitable and if you want I can tell you what to do if you want to try it. At least you can get the information from your supplier (Aliexpress) if your box has an encrypted firmware or not.
Click to expand...
Click to collapse
Hi ath156!
Can you elaborate a bit more about this specific procedure to be done to install a different ROM? I saw some of your posts in this forum regarding using a non-permanent TWRP to backup all partitions before flashing any custom rom and (maybe?) flash the "vendor" partition in case wifi doesn't work or so:
[ROM] Mod: HK1 X3 / H96 max X3 / VONTAR X3 / Transpeed X3 Air / Bqeel Y8 Max (Amlogic
Thank you for your feedback.:) Taking into account your remarks here are the corrected instructions to install the rom with an SD card : If you want to install the firmware with an sd card please do the following: A.* Download the program Burn...
forum.xda-developers.com
[ROM] Mod: HK1 X3 / H96 max X3 / VONTAR X3 / Transpeed X3 Air / Bqeel Y8 Max (Amlogic
Thank you for your feedback.:) Taking into account your remarks here are the corrected instructions to install the rom with an SD card : If you want to install the firmware with an sd card please do the following: A.* Download the program Burn...
forum.xda-developers.com
I'm about to order a Transpeed X3 (Plus?) but if it doesn't have a working rom (including stock), I will have to skip it.
Hi guys I bought a Transpeed X3_plus it has been working fine for about 6 months now and I would like to upgrade its firmware. As ath156 mentioned before it has encrypted firmware. I told the supplier to send its latest firmware then I bought a usb to usb cable. Installed the USB burn tool but I still cannot connect to the box. Any help would be greatly appreciated. by the way it's a newbiee here
Where is the stock rom for the x3 plus version of end 2019? I try 10 times but no any works ---romcode---, or how to get in recovery? any tricks?
geheimke said:
Where is the stock rom for the x3 plus version of end 2019? I try 10 times but no any works ---romcode---, or how to get in recovery? any tricks?
Click to expand...
Click to collapse
try this. another people tell me.
X88 Pro X3 (не шифрованный) — slimBOXtv
slimboxtv.ru
translate with google
No you can't flash slimbox on this encoded device. I have try more than 30 roms No one can activate this transpeed X3 Plus anymore
geheimke said:
No you can't flash slimbox on this encoded device. I have try more than 30 roms No one can activate this transpeed X3 Plus anymore
Click to expand...
Click to collapse
Or you can ask the shop where you buy this box, such as aliexpress or alibaba.They may have the rom.
[ROM] Transpeed X3 Plus 20200602 r1 (10.0 with kodi) stock firmware - FreakTab
Hello, After contact the seller because an update problem, he send me the link to download last firmware (2020-06-02) and tools for the Transpeed X3 Plus. Here you have the download links: - Transpeed X3 Plus 20200602 r1 (10.0 with kodi) stock firmware...
forum.freaktab.com
this man's answer link don't work.
Dear thank you, for your aswer,
Yes, I have already gone through that, even the entire 4pda discussion, the problem is you can flash something but it always blocks at the boot logo. display does not light up either. I also asked for help from VasilyShevchuk (the youtube movie) who also has such a box, kind of not real x3 plus. Kind of security. There's a solution somewhere
but the problem is translations from Russian is not always easy, I then also took parts from the forum from 4dpa but so far I have not accepted what they mean, you would have to make an SD card and prepare a usb stick, with kind boat data, then you have to short circuit a chip somewhere.
and then it will read and start up and then you have the option to install twrp and then you can restore the data. I have tried this a number of times, but clearly it is different. I also tried to get the custom rom through aliexpress seller, who couldn't help me.
try this https://xdafirmware.com/x88-pro-x3
geheimke said:
No you can't flash slimbox on this encoded device. I have try more than 30 roms No one can activate this transpeed X3 Plus anymore
Click to expand...
Click to collapse
Maybe also try this version (which is for X99 max plus)? https://chinagadgetsreviews.com/dow...stock-firmware-for-x99-max-plus-tv-box-2.html
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
@ PetiaWarzel and ath156 I already try both versions, no i think only a big trix can helps
geheimke said:
View attachment 5313669@ PetiaWarzel and ath156 I already try both versions, no i think only a big trix can helps
Click to expand...
Click to collapse
Have you also tried this from Vortex:https://4pda.to/forum/index.php?showtopic=982302&st=300#entry96036753
"Friends with versions of the franklin-userdeburg 9 PPR1.180610.011.20200311 / PPR1.180610.011.20200425 (and other versions of similar encrypted boxes, which do not install firmware via UBT in any way):
Now you can flash your device.
I present to you custom firmware for encrypted X88 pro X3 and Transpeed.10.100m :
1) Based on Android TV 9 . v2.3.0: link
ATV shell and software suite. Sharpened under the control of the remote control.
#
Screenshots
2) Based on Android 9 Pie (AOSP). v2.3.0: link
The default shell is SquareHome3. It is convenient to work even without an air mouse.
#
Screenshots
Features:
Fixed WiFi module. Now turning it on does not cause 100% CPU load;
All peripherals, including the clock, work;
Installed according to the instructions (see below);
The firmware is as lightweight as possible. Who needs it, put it yourself.
Installation instructions:
1) download the selected archive, unzip it on your PC (attention, you need about 2-3 Gig of space);
2) install drivers from the driver_ubt folder (InstallDriver.exe) and driver_adb (UniversalAdbDriverSetup.msi);
3) disconnect the box from the PC, from the power supply from everything;
4) run the file _run.flash.bat , press <Enter>;
5) as the lines "Waiting for device" run, insert the match into the AV connector and connect it to the computer with a USB cable;
6) as soon as the lines stop running, we take out the match and insert the power cable;
7) wait for 6 minutes. At this time, the percentages of the firmware of various partitions should run. if this is not the case, we check again all the drivers and repeat pp. 3-7.
#
this is how it should be
8) at the end of the firmware, wipe and reboot of the box will occur.
Hinged TWRP v3.4.0: link
Your box is back in business. Enjoy!"
Thanks in advance for your detailed explanation, but no, if you run run.flash.bat with reset pressed, it does not start the flash, if you just enter the reset and run the run.flash.bat then it flashes, but the result is stuck on vortex logo screen and no display light up even after repeating the steps or waiting 6 minutes
Transpeed X3 another cheap box with Amlogic S905X3 SoC
Transpeed X3 is the name of another box with Android that we can include in the cheap range of this type of players. A box that although with low expectations
androidpctv.com
transpeed x3 plus‘s wifi chip is sp8335m,you can replace it with sp6255m. then,you can flash transpeed x3 plus with other s905x3 chip box image. I haven't do this yet.
https://bit.ly/3guRFAA
i found this,help you.
recently,i heard this box‘s emmc maybe broken.so you would change original emmc。

[V1][S905X][ROM][Android TV 9][TESTING] Mecool ROM PORT for Generic S905X Devices

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hello everyone. Since my last experiment with booting the Mi Box S ROM, I've been searching a way to boot other ROM's from other devices. I needed a way easily change the DNR (Denoiser) so I could improve video quality on apps like Disney+ and I needed a way to get Auto Framerate Switch to get that smooth playback, so I found this Mecool KM1 ROM (yes, with S905X3) and I was able to boot it on my S905X device.
The performance of this ROM is great for me, DNR and Picture options are available, there's an easy way to ROOT it and you can justinstall AFRD app to get Auto Framerate Switch.
Hardware Support
This is where it gets tricky, my box has a S905X CPU with a QCA9377 and works perfect here. For now I don't have any other boxes to test but I'll be working hard with my friend @aidanmacgregor to bring more support, I also need your feedback to figure things out.
How To Install
Use Amlogic USB Burn Tool with a Male to Male USB Cable to flash the ROM, connect to the TV and wait until it boots up.
How To Root
Download the Temporary TWRP and Super SU files linked bellow and copy them to an SD Card or USB Drive.
Enable ADB Debugging on developer settings. Find your box IP Adress, for this you can go to the About Settings page and about.
Use a tool like "Minimal ADB Fastboot", connect your device through ADB and use the command "adb reboot recovery" to go to the recovery.
From this recovery install the temporary TWRP zip, after that you'll be booting to TWRP, from there you need to select USB or SD card, from there you just select the SuperSU zip.
Restart the box and you'll be rooted.
What's next
You can expect updates to this ROM.
I have plans to bring ROOT and AFRD pre-installed if there's popular demand for it.
I'm also working on getting Android 10 to boot on S905X when I can get some more free time out of college.
Considering using Telegram so we can exchange some ideas together.
I also really need your feedback and opinion.
Downloads
ROM: https://drive.google.com/file/d/10_xGTOOjn7d_X7JkkmHyTRQlV6zOeOWc/view
TWRP and SuperSU attached bellow.
Big thanks
Thanks to @aidanmacgregor for helping to sort out the unpacking and repacking of the ROM and for working with me for the next update.
Thanks to @ sagert from Freaktab forum for the Root method.
Thanks to @ ViT for the TWRP he provided.
Thanks to @Ricky Divjakovski for the Amlogic Tools he provides.​
Nice one lad more options for these devices is always awesome!
aidanmacgregor said:
Nice one lad more options for these devices is always awesome!
Click to expand...
Click to collapse
have to make a rom compatible with tv box HK1 TV S905X3
Thanks for the ROM. I have tried successfully on an x96 box with 1G/8G. Both the wifi and remote works well. The problem is when I tried to root the device - I can't seem to connect via adb (I have developer option and USB debugging enabled). My computer does not recognise that the device is connected (via male USB-A to male USB-A cable). It would be fantastic if you upload an image with root pre-installed.
Actually ignore the last request. I have managed to root my device after muddling through the adb over network. Thanks again for the fantastic ROM
Hi. I have to try to install this rom on the TUREWELL T95 Max+ but the usb burning tool gave me this error 0x10102002
Can it be solved somehow?
What that support for amlogic s905x-bv android 6.0.1 ( zte hg680p )
Waldani said:
What that support for amlogic s905x-bv android 6.0.1 ( zte hg680p )
Click to expand...
Click to collapse
Correction..
It's not ZTE HG680P..
But, Fiberhome HG680P..
wawa9292 said:
Correction..
It's not ZTE HG680P..
But, Fiberhome HG680P..
Click to expand...
Click to collapse
hi, i believe this device ia actually manufactured by ZTE and just rebadged as fibrehome, i think this device wont work, seems to not like generic roms
aidanmacgregor said:
hi, i believe this device ia actually manufactured by ZTE and just rebadged as fibrehome, i think this device wont work, seems to not like generic roms
Click to expand...
Click to collapse
Is that so??
And if i may ask,
Now my HG680P is running Marshmallow (rooted)
What can i do to upgrade from marshmallow to Pie or at least Nougat..
UBT process stopped at 7% (after "download meson1" then state "formatting", and fail/stopped right there)
As my friend have a HG680P unit which is running stock Android Pie (from manufacturer)..
And is already run rooted Pie now..
We do cross-check both device, and it's turn out both device is identical..
wawa9292 said:
Is that so??
And if i may ask,
Now my HG680P is running Marshmallow (rooted)
What can i do to upgrade from marshmallow to Pie or at least Nougat..
UBT process stopped at 7% (after "download meson1" then state "formatting", and fail/stopped right there)
As my friend have a HG680P unit which is running stock Android Pie (from manufacturer)..
And is already run rooted Pie now..
We do cross-check both device, and it's turn out both device is identical..
Click to expand...
Click to collapse
there are several versions of this device v1. v2. v3 v4 etc, with diffrent hardware inside i think
Thanks for your efforts!
Tested on A95X B7N (905x 1/8 Realtek 8616 or 8618 - can't recall), some observations:
1. Performance is quite good
2.Wifi does not work
3. Original remote supplied with box does not work. However a generic remote from a old S805 MXQ box (512 ram) works perfectly
4. EAC3 Audio does not output anything through Plex, regardless of Sound settings (incl. Advanced) or Plex settings (common for my box at least, workaround possible).
5. HDR works.
DiogoSilva48 said:
View attachment 5212061​
Herkese merhaba. Mi Box S ROM'u başlatmayla ilgili son denememden beri, diğer cihazlardan diğer ROM'ları başlatmanın bir yolunu arıyordum. Disney+ gibi uygulamalarda video kalitesini iyileştirebilmek için DNR'yi (Denoiser) kolayca değiştirebilecek bir yola ihtiyacım vardı ve bu pürüzsüz oynatmayı elde etmek için Otomatik Kare Hızı Anahtarını almanın bir yoluna ihtiyacım vardı, bu yüzden bu Mecool KM1 ROM'u buldum (evet, S905X3 ile) ve onu S905X cihazımda başlatmayı başardım.
Bu ROM'un performansı benim için harika, DNR ve Resim seçenekleri mevcut, KÖK yapmanın kolay bir yolu var ve Otomatik Kare Hızı Anahtarı almak için sadece AFRD uygulamasını yükleyebilirsiniz.
Donanım Desteği
İşte işin zorlaştığı yer burası, kutumda QCA9377'li bir S905X CPU var ve burada mükemmel çalışıyor. Şimdilik test edecek başka kutum yok ama daha fazla destek getirmek için arkadaşım @aidanmacgregor ile çok çalışacağım, ayrıca bazı şeyleri halletmek için geri bildiriminize ihtiyacım var.
Nasıl kurulur
ROM'u flaş etmek, TV'ye bağlamak ve açılana kadar beklemek için Erkek - Erkek USB Kablosu ile Amlogic USB Burn Tool'u kullanın.
Nasıl Köklenir
Aşağıda bağlantısı verilen Geçici TWRP ve Super SU dosyalarını indirin ve bir SD Karta veya USB Sürücüye kopyalayın.
Geliştirici ayarlarında ADB Hata Ayıklamayı etkinleştirin. Kutu IP Adresinizi bulun, bunun için Ayarlar Hakkında sayfasına ve hakkında gidebilirsiniz.
"Minimal ADB Fastboot" gibi bir araç kullanın, cihazınızı ADB üzerinden bağlayın ve kurtarmaya gitmek için "adb reboot recovery" komutunu kullanın.
Bu kurtarma işleminden geçici TWRP zip dosyasını yükleyin, bundan sonra TWRP'ye önyükleme yapacaksınız, oradan USB veya SD kartı seçmeniz gerekiyor, oradan sadece SuperSU zip dosyasını seçiyorsunuz.
Kutuyu yeniden başlatın ve kökleneceksiniz.
Sıradaki ne
Bu ROM için güncellemeler bekleyebilirsiniz.
Popüler talep olursa, ROOT ve AFRD'yi önceden yüklenmiş olarak getirmeyi planlıyorum.
Ayrıca, üniversiteden biraz daha boş zaman bulabileceğim zaman, Android 10'un S905X'te açılmasını sağlamaya çalışıyorum.
Birlikte fikir alışverişinde bulunabilmemiz için Telegram kullanmayı düşünüyoruz.
Ayrıca görüşlerinize ve fikirlerinize gerçekten ihtiyacım var.
İndirilenler
ROM: https://drive.google.com/file/d/10_xGTOOjn7d_X7JkkmHyTRQlV6zOeOWc/view
TWRP ve SuperSU ekli körük.
Çok teşekkürler
@aidanmacgregor'a ROM'un paketten çıkarılması ve yeniden paketlenmesine yardımcı olduğu ve bir sonraki güncelleme için benimle birlikte çalıştığı için teşekkürler.
Root yöntemi için Freaktab forumundan @ sagert'e teşekkürler.
Sağladığı TWRP için @ ViT'ye teşekkürler.
Sağladığı Amlogic Araçları için @Ricky Divjakovski'a teşekkür ederiz.​
Click to expand...
Click to collapse
merhaba Diego mecool ki pro için de bir rom yapabilir misin?
Will it work on kernel 3.14.29?
headnail said:
Thanks for your efforts!
Tested on A95X B7N (905x 1/8 Realtek 8616 or 8618 - can't recall), some observations:
1. Performance is quite good
2.Wifi does not work
3. Original remote supplied with box does not work. However a generic remote from a old S805 MXQ box (512 ram) works perfectly
4. EAC3 Audio does not output anything through Plex, regardless of Sound settings (incl. Advanced) or Plex settings (common for my box at least, workaround possible).
5. HDR works.
Click to expand...
Click to collapse
I've the same box and had the same experience .Great tip on generic remote ,works a treat. Tried atvxperience beta v5 ROM all good but again no wifi
this rom can boot coreelec?
edit:
tried, and yes, this rom can boot coreelec (adb reboot update), and we can even dual boot coreelec on internal memory using "ceemmc -x" !
rom looks ok, but live channels crash immediately when trying to use PIP.
Hi, in my a95x f3 air box cannot boot, give the following error,[0x10102002]Romcode/Initialize DDR/Initialize PLL/USB Control setup error,
Any solution?
rom nice but no DD, DD+ and DTS sound via HDMI passthrough in manual and auto mode, there is only stereo sound, can you fix it?
does it work on an amlogic s905x_EMCP_V12 2021-07-24?
I am sorry, I forgot about this ROM. I can't update it anymore, my S905X box's eMMC storage died last year and I bought a new Chromecast w/ Google TV, so, I have no way to test and develop any s905x ROM's anymore.
DiogoSilva48 said:
I am sorry, I forgot about this ROM. I can't update it anymore, my S905X box's eMMC storage died last year and I bought a new Chromecast w/ Google TV, so, I have no way to test and develop any s905x ROM's anymore.
Click to expand...
Click to collapse
Uma pena Brother, essa rom tinha tudo pra ser uma das melhores.

Categories

Resources