since im really not happy with the volume of my mi9t i tryed to enable viper4a to help me out with that.
took me alot of trials and errors..... but i eventually failed.
but i did stumble across a thread in the mi9 section which guides the installation of a viper4a.
https://forum.xda-developers.com/Mi-9/how-to/guide-how-viper4android-rooted-xiaomi-t3913030
i did excatly as it states in the guide (with the exception of flashing it straight from the magisk manager and not twrp)
and it worked!
take notice that im using the latest EU dev rom.
1. Download the Viper4Android_FX-v4.3.zip via Magisk but don't install it via Magisk
2. flash the Viper zip and then adhere to the following:
- Press a volume button when prompted to do so
- Volume down (to choose vol key installation method)
- Vol up (for new 2.5.0.5)
- Vol up (for material, if preferred)
- Vol up (for system app)
- Vol up (for lib workaround to be installed)
3. Reboot
4. Via Magisk find and install "Init.d injector" and then reboot
Viper4Android should now be processing your audio!
hope it helps.
I installed newest module Viper4Android FX (2.7.1.0) from Magisk in Magisk and it worked instantly on my Mi 9T (xiaomi.eu last beta).
sorry but i dont understand how to do this after install the viper zip
"... then adhere to the following:
- Press a volume button when prompted to do so
- Volume down (to choose vol key installation method)
- Vol up (for new 2.5.0.5)
- Vol up (for material, if preferred)
- Vol up (for system app)
- Vol up (for lib workaround to be installed)"
Zenderable said:
I installed newest module Viper4Android FX (2.7.1.0) from Magisk in Magisk and it worked instantly on my Mi 9T (xiaomi.eu last beta).
Click to expand...
Click to collapse
Yeah me too
ramir0 said:
sorry but i dont understand how to do this after install the viper zip
"... then adhere to the following:
- Press a volume button when prompted to do so
- Volume down (to choose vol key installation method)
- Vol up (for new 2.5.0.5)
- Vol up (for material, if preferred)
- Vol up (for system app)
- Vol up (for lib workaround to be installed)"
Click to expand...
Click to collapse
You don't do that after the zip install.
You do it DURING. It gives you a few options and you should then follow my instructions....
ramir0 said:
sorry but i dont understand how to do this after install the viper zip
"... then adhere to the following:
- Press a volume button when prompted to do so
- Volume down (to choose vol key installation method)
- Vol up (for new 2.5.0.5)
- Vol up (for material, if preferred)
- Vol up (for system app)
- Vol up (for lib workaround to be installed)"
Click to expand...
Click to collapse
While flashing it'll ask you which version, which theme etc do you want. You can choose it with vol up or down. That's what he told you here. Which options to select. Just flash the zip you'll understand
Related
please help i have motorola atrix 4g at&t and please the link of neutrino or codename rom :c
if you are in CM9 that means, you have a rooted and bootloader unlocked atrix with CWM recovery. I will help you buddy...
PREPARE YOUR PHONE FOR FLASH THE ROM;
-make sure you have installed the drivers of motorola. It is recommended for your pc to recognise your phone when you connect it.
-(I recommend GT version, it is FAST and battery life is great! Better than EE.) Download the rom and the addons on the link>> http://forum.xda-developers.com/showpost.php?p=26657806&postcount=7819
-put the files in your SD CARD.( put the .zip files to your SD CARD, do not extract!)
-PREPARE yourself for the flashing
1) FULL WIPE
- https://www.dropbox.com/s/1tgt2yax88rp2mi/Moto-Fastboot FULL WIPE.rar <<< DOWNLOAD THIS.
-Power off your phone.
-open your phone in FASTBOOT mode. (press power button and volume down at the same time until you see 'Fastboot' on the screen, then press Volume up to activate it. Connect your phone to your PC.
-RUN the "Moto-FB Full Wipe.bat" and follow the instructions. (I remember that you should only press ENTER )
2)FLASHING ROM
-Power off your phone and POWER ON with POWER ON+VOLUME DOWN again.
-When you see Fastboot, Navigate with the power down button until you see ANDROID RECOVERY. (I think you should press 7 times to power down to see, if you pass it do not press up to go back just keep pressing vol down to see it again.) When you see Android Recovery Press VOL UP to enter the recovery.
-navigate to 'install .zip from sd card' with using vol up or down then press POWER ON button to enter.
-'choose .zip file from sd card' and power on button to enter again.
-find your Neutrino2.8GT.zip file and press power on!
-It will install in 15-20 seconds.
-then install the ADDONS by following the same method. (install zip from sd>choose zip from sd>default camera apk(that was the one of the addons.)) You may install all of them or some of them, depends on you. But just install them all
-after you done, reboot your phone by selecting 'reboot the phone' in the CWM recovery menu.
-ENJOY YOUR AWESOME ROM.
PRESS THE "THANKS" IF I HELPED! :angel:
Hello guys, today i get my friend's old Samsung galaxy ace duos SCH-i589..& this is my first samsung device to be looking for development in xda (i personally avoiding samsung). I thought that all samsung devices have good xda support but from my searching on google shows that it has almost nil support.. I even can't find proper forum for installing cwm in this device..Now i think what i found from diverse locations should be put in one place.
NOTE: I am not a developer nor below is my work..i would like to all those members who made it possible.
Running from stock rom, i can root this device from the below files:
update.zip
root Instruction:
1. Download & copy the below attached "update.zip" to the root of your sdcard.
2. Turn off your phone.
3. Press & hold (Power + Volume down + Home) keys & release when the phone starts in recovery mode.
4. In recovery mode, the screen select "select update.zip from sdcard".
Remember in recovery touchscreen will not work use volume up down & home keys.
5. Select "update.zip".
6. Yes
7. Done
now to unroot this device after rooting:
unroot.zip
unroot Instructions:
1. Uninstall all [Root] apps.
2. Download "unroot.zip"
3. Turn off your phone.
4. Press & hold (Power + Volume down + Home) keys & release when the phone starts in recovery mode.
5. In recovery mode, the screen select "select update.zip from sdcard".
Remember in recovery touchscreen will not work use volume up down & home keys.
6. Select "unroot.zip".
7. Yes
8. Done.
Caution : Both files are related to each other, If rooted with "update.zip" from here then only use "unroot.zip"
Clockwork mod recovery
Now temporary cwm which can do any cwm task but u have to load it everytime.
CWM-6102.zip
cwm instruction
1. Download & copy the below attached "CWM-6102.zip" to the root of your sdcard.
2. Turn off your phone.
3. Press & hold (Power + Volume down + Home) keys & release when the phone starts in recovery mode.
4. In recovery mode, the screen select "select CWM-6102.zip from sdcard".
Remember in recovery touchscreen will not work use volume up down & home keys.
5. Select "CWM-6102.zip".
6. Yes
7. Done
8. This has to be done every time you want to load cwm recovery.
Now i haven't tested beyond that but i found a youtube link for flashing stock rom via odin
https://www.youtube.com/watch?v=4ChtmNtpk3c
but this is in spanish so i translated in english here..
You must install Samsung KIES to ensure that your PC detects your phone.
After downloading install Odin
1 - Restart the phone in Download Mode ( Vol down , Home, Power Simultaneously ) .
press volume up to continue ( or vol down to leave but it can damage... )
2- Start Odin
3 - select files and press Start
Watch Out !!! Never unplug your phone before restarting
After 5-10 minutes your phone will reboot to your new ROM
stock rom download below:
link:http://www.mediafire.com/download/z7t1yz9c615ebj1/rom+sch-i589.zip
Thank you very much! Although my SCH-i589 is currently hard brick, I think it will be very useful! -- Greetings from new members after 8 years
Hello Guys,
share mega link created by me of Firmware Galaxy S10 Android PIE G973FOXM1ASD5 - AUT- No WIPE Version, tested and working on my S10 ITV Dual SIM no brand :
https://mega.nz/#!DYdmjKDJ!hy6ei9-ZrC4TdLQbMy-bGiGEDjg8cZiNEwmvl0HCDXk
Guide for Flash Firmware (Use Odin attached on the 3ad):
1. Open the Odin executable;
2. Click the BL button and select the file BL ****;
3. Click on the AP button and select the file AP ****;
4. Click on the CP button and select the file CP ****;
5. Click on the CSC button and select the file CSC ****;
6. Now enter in Download Mode (When the phone is switched off, press VOLUME DOWN button + BIXBY button + POWER button at the same time);
7. You will find yourself in front of a heavenly screen where you will be asked to click on the Volume Up button to confirm the operation;
8. Connect the phone to the PC and wait for the device to be recognized by Odin (The ID: COM box will change color and 0 will appear: COM6 or other number);
9. Click Start;
10. The operation will last a few minutes (usually 5-10 minutes). At the end the device will restart itself to complete some operations;
Regards
I have the Australian version of the Galaxy S10 and in order to get to the Download mode, I need to:
- Hold Volume down + Bixby
- While holding, connect the usb cable (link to my computer)
For some reason the combinaison Volume down + Bixby + Power does not work for me.
Thanks otherwise for sharing this firmware
massacreur75010 said:
I have the Australian version of the Galaxy S10 and in order to get to the Download mode, I need to:
- Hold Volume down + Bixby
- While holding, connect the usb cable (link to my computer)
For some reason the combinaison Volume down + Bixby + Power does not work for me.
Thanks otherwise for sharing this firmware
Click to expand...
Click to collapse
yes the procedure is that, I don't know why you can't get into the download mode
With the s10 its button combinations WHILST putting the cable in.
Holding Bixby and power down whilst inserting cable into the arse end of it
ciccio80 said:
yes the procedure is that, I don't know why you can't get into the download mode
Click to expand...
Click to collapse
This button combination does not work on the S10. You can either:
1. Boot into recovery by pressing Volume Up + Bixby button then Power button. In the recovery menu select bootloader and this will take you to Download Mode
2. Press Volume Down + Bixby button then connect the USB cable.
Here I share the steps that worked for me (G973F) to install a custom ROM/MOD.
01. Download ASF3 and flash it through Odin (or the last one compatible with the ROM or MOD you wish to use).
02. Install Magisk Manager from here.
03. Extract AP and copy it to SDCard.
04. Open Magisk Manager, press Install and patch AP. It will generate a magisk_patched.rar on \internal storage\download.
05. Copy magisk_patched.rar to your computer.
06. Reboot your phone to download mode.
07. Flash magisk_patched.tar as AP in ODIN, together with the BL, CP and HOME_CSC files. Important: Uncheck “Auto Reboot” in Options!
08. Unplug USB cable, press Power + Volume Down to exit download mode. As soon as the screen turns off, immediately press Power + Bixby + Volume Up to boot to recovery partition and continue pressing the volume up button until you see the stock recovery screen.
09. In the stock recovery menu select Wipe data/factory reset to wipe the data of the device.
10. Select Reboot system now, and immediately press Power + Bixby + Volume Up. After seeing the bootloader warning screen, release all buttons.
11. The device will automatically reboot for the first time it boots, this is completely normal and done by design.
12. After the device is booted up, do the usual initial setup. The following steps will need internet connection.
13. You shall see Magisk Manager in your app drawer; if not, manually install it again and continue to the next step. The app would be a stub and it shall automatically upgrade to the full Magisk Manager when you open it.
14. Magisk Manager will ask to do additional setups. Let it do its job and the app will automatically reboot your device.
15. Download TWRP from here and copy twrp_ianmacd.img to your SDCard.
16. Open Magisk Manager, press Install and patch twrp_ianmacd.img from the step before. It will generate a magisk_patched.img on \internal storage\download.
17. Copy magisk_patched.img to your computer and rename it to recovery.img
18. In your computer open magisk_patched.rar with 7-zip, remove recovery.img and then add recovery.img from previus step to magisk_patched.rar.
19. Reboot your phone to download mode.
20. Flash magisk_patched.tar as AP in ODIN, the rest of the fields remains blank. Important: Uncheck “Auto Reboot” in Options!
21. Unplug USB cable, press Power + Volume Down to exit download mode. As soon as the screen turns off, immediately press Power + Bixby + Volume Up to boot to recovery partition and continue pressing the volume up button until you see the stock recovery screen.
22. Now you are in TWRP Recovery, format Data and then reboot to recovery.
23. After the device is booted up, do the usual initial setup. The following steps will need internet connection.
24. You shall see Magisk Manager in your app drawer; if not, manually install it again and continue to the next step. The app would be a stub and it shall automatically upgrade to the full Magisk Manager when you open it.
25. Magisk Manager will ask to do additional setups. Let it do its job and the app will automatically reboot your device.
26. Download the ROM / MOD of your choice to your phone SDCard.
27. Reboot your phone, as soon as the screen turns off, immediately press Power + Bixby + Volume Up to boot to recovery partition and continue pressing the volume up button until you see the stock recovery screen.
28. Once you are in TWRP install the ROM / MOD of your choice but don't debloat (if the ROM / MOD has this option).
29. Once install finishes don't reboot, go to TWRP and reboot to Recovery.
30. After the device is booted up, do the usual initial setup. The following steps will need internet connection.
31. After that you can boot to TWRP and install the ROM /MOD again debloating what you want, again if the ROM / MOD has the option.
As an advice, I don't recommend to debloat Chrome.
I hope that this can help someone
Thank you so much, that's very helpful indeed!
If I just want to have magisk in my stock rom without twrp, I should only follow steps 1-14?
Monigote97 said:
Thank you so much, that's very helpful indeed!
If I just want to have magisk in my stock rom without twrp, I should only follow steps 1-14?
Click to expand...
Click to collapse
That's right!
magisk_patched.rar in step 18 is the magisk_patched.rar in step 5 ? Because if not, I don't know where your find this archive
mrforza said:
magisk_patched.rar in step 18 is the magisk_patched.rar in step 5 ? Because if not, I don't know where your find this archive
Click to expand...
Click to collapse
Yes, it's the same.
In the step 18 you should take magisk_patched.rar from step 5 and replace recovery.img with the patched one in step 16 (previusly renamed)
Rober7o said:
Yes, it's the same.
In the step 18 you should take magisk_patched.rar from step 5 and replace recovery.img with the patched one in step 16 (previusly renamed)
Click to expand...
Click to collapse
Sorry but in step 4, it generate a magisk_patched.tar instead of .rar....
Can I continue with that?
mrforza said:
Sorry but in step 4, it generate a magisk_patched.tar instead of .rar....
Can I continue with that?
Click to expand...
Click to collapse
No, something its wrong. When you patch the AP (.tar.md5) file with Magisk, it should generate a "magisk_patched.tar" file in \internal storage\download\
Please check if you are using the correct Magisk Manager from https://github.com/ianmacd/MagiskBuilds
I got stuck in step 21.
"Press Power + Volume Down to exit download mode. As soon as the screen turns off, immediately press Power + Bixby + Volume Up to boot to recovery partition and continue pressing the volume up button until you see the stock recovery screen."
always green screen Downloading at this step no way out.
the 3 buttons combo not bring me TWRP.
ps000000 said:
I got stuck in step 21.
"Press Power + Volume Down to exit download mode. As soon as the screen turns off, immediately press Power + Bixby + Volume Up to boot to recovery partition and continue pressing the volume up button until you see the stock recovery screen."
always green screen Downloading at this step no way out.
the 3 buttons combo not bring me TWRP.
Click to expand...
Click to collapse
First you must keep pressing Power + Volume Down buttons until you get out of Download Mode and your phone shuts down, after that immediately you must press Power + Bixby + Volume Up to boot to Recovery and continue pressing the volume up button until you see the stock recovery screen.
I hope it helps!
Great guide, just missed it though as am already sorted but this is it!:good:
Any chance of putting a bullet point on each step? Would be a lil easier to read. (Sorry for being picky lol)
exocetdj said:
Great guide, just missed it though as am already sorted but this is it!:good:
Any chance of putting a bullet point on each step? Would be a lil easier to read. (Sorry for being picky lol)
Click to expand...
Click to collapse
I took your advice :highfive:
Rober7o said:
I took your advice :highfive:
Click to expand...
Click to collapse
Awesome! Looks very good ??
I thoight u have to flash multi disabler after you flash twrp.
Huawei Mate X ROM MOD?
I am planning to flash Lineage OS 17 on my S10e, is the guide still relevant or is there an updated version?
> 20. Flash magisk_patched.tar as AP in ODIN, the rest of the fields remains blank. Important: Uncheck “Auto Reboot” in Options!
In the official magisk installation guide is stated:
Reboot to download mode, and flash magisk_patched.tar as AP in Odin, together with the BL, CP and HOME_CSC files. Never flash only an AP file, as Odin can shrink your /data file-system if you do.
Important: Uncheck “Auto Reboot” in Options!
I dont know if it can cause problems..
How to root and flash TWRP on Samsung Galaxy M30s SM-M307F Android 11 R. This TWRP recovery is developed by @santhoosh many thanks for his jobs. After Android 11 released rooting method is little different than usual. Use it at your own risk! Follow the instruction carefully and Make sure to backup all your important data!
Rooting and Flashing instructions
Make sure the bootloader is unlocked, OEM unlocking option is grey out
Enter Download Mode : Turn Power Off. Press and hold Volume Up + Volume Down key together, while pressing these keys, connect the phone to computer, then press volume up once.
Open ODIN, IMPORTANT!: Uncheck “Auto Reboot” in Options!
Flashing TWRP-M30s-A11-3.5.0_9-0_Magisk.tar as AP in ODIN, ( OneUI3 > TWRP_Magisk.tar )
Click Start.
TWRP Recovery is now successfully flashed to your device! Several steps before you can properly use the device.
DO NOT SKIP THIS STEP! Don't remove USB Cable, let it connected. Press and hold Volume Down + Power Key, when the screen blank quickly press and hold Volume Up + Power key, when Samsung Logo appears release Power key only, keep pressing Volume Up key until TWRP Recovery Mode Appears.
Select Wipe -> Format data, type "yes" and confirm
Select Install - Disable_Dm-Verity_ForceEncrypt_03.04.2020.zip Swipe to confirm Flash
Select Reboot to Recovery
Setup the phone
Connect the Phone to Internet
Make sure OEM unlock option is grey out
Install Magisk Manager. Magisk Manager will ask to do additional setups. Let it do its job and the app will automatically reboot your device.
Done!
DOWNLOAD
TWRP GSI & OneUI3 Android 11 Galaxy M30s
OneUI3 > TWRP_Magisk.tar, to make it easier to identify I rename it to TWRP-M30s-A11-3.5.0_9-0_Magisk.tar
Video Tutorial How to Root Galaxy M30s Android 11
Thanks, does with SM-m307FN ?
ibere said:
Thanks, does with SM-m307FN ?
Click to expand...
Click to collapse
Not tested, but I think it will work
redymedan said:
Not tested, but I think it will work
Click to expand...
Click to collapse
doesnt work with SM-m307FN
redymedan said:
How to root and flash TWRP on Samsung Galaxy M30s SM-M307F Android 11 R. This TWRP recovery is developed by @santhoosh many thanks for his jobs. After Android 11 released rooting method is little different than usual. Use it at your own risk! Follow the instruction carefully and Make sure to backup all your important data!
Rooting and Flashing instructions
Make sure the bootloader is unlocked, OEM unlocking option is grey out
Enter Download Mode : Turn Power Off. Press and hold Volume Up + Volume Down key together, while pressing these keys, connect the phone to computer, then press volume up once.
Open ODIN, IMPORTANT!: Uncheck “Auto Reboot” in Options!
Flashing TWRP-M30s-A11-3.5.0_9-0_Magisk.tar as AP in ODIN, ( OneUI3 > TWRP_Magisk.tar )
Click Start.
TWRP Recovery is now successfully flashed to your device! Several steps before you can properly use the device.
DO NOT SKIP THIS STEP! Don't remove USB Cable, let it connected. Press and hold Volume Down + Power Key, when the screen blank quickly press and hold Volume Up + Power key, when Samsung Logo appears release Power key only, keep pressing Volume Up key until TWRP Recovery Mode Appears.
Select Wipe -> Format data, type "yes" and confirm
Select Install - Disable_Dm-Verity_ForceEncrypt_03.04.2020.zip Swipe to confirm Flash
Select Reboot to Recovery
Setup the phone
Connect the Phone to Internet
Make sure OEM unlock option is grey out
Install Magisk Manager. Magisk Manager will ask to do additional setups. Let it do its job and the app will automatically reboot your device.
Done!
DOWNLOAD
TWRP GSI & OneUI3 Android 11 Galaxy M30s
OneUI3 > TWRP_Magisk.tar, to make it easier to identify I rename it to TWRP-M30s-A11-3.5.0_9-0_Magisk.tar
Video Tutorial How to Root Galaxy M30s Android 11
Click to expand...
Click to collapse
when i select install in twrp i cant find Disable_Dm-Verity_ForceEncrypt_03.04.2020.zip, all i get is "(up a level)"
crabcakesmen said:
when i select install in twrp i cant find Disable_Dm-Verity_ForceEncrypt_03.04.2020.zip, all i get is "(up a level)"
Click to expand...
Click to collapse
use universal multidisabler samsung I have sent it to you PM
is this still working on Oneui 3.1 update ??
Edit : Worked on Oneui 3.1 (CUD1)
does it work with sm-307fn/ds ? :/.. dont seem to find any tutorials for this model..
redymedan said:
use universal multidisabler samsung I have sent it to you PM
Click to expand...
Click to collapse
Where can I get this one?
lost root after restart
If you have lost root after restart please try the method mentioned in the below tutorial;
How To Root Samsung Galaxy M30s On Android Pie 9.0, 10 & 11? - SamsungSFour.Com
How To Root Samsung Galaxy M30s On Android Pie 9.0, 10 & 11?
www.samsungsfour.com
FLASHED TWRP BUT CANNOT ROOT
Tried it with my M307FN and it worked. But GPS and Auto Rotate Display is not working.